標準號 |
中文名稱 |
英文名稱 |
| DIN 48200-1-1981 |
架空輸電絞線用單線.銅線 |
(Copper wires for stranded conductors) |
| DIN 48200-2-1981 |
架空輸電絞線用單線.銅合金線 |
(Bronze wires for stranded conductors) |
| DIN 48200-7-1981 |
架空輸電絞線用單線.銅包鋼線 |
(Copper clad steel wires for stranded conductors) |
| DIN 48201-1-1981 |
架空輸電絞線.銅絞線 |
(Copper stranded conductors) |
| DIN 48201-2-1981 |
架空輸電力絞線.銅合金(B2)絞線 |
(Bronze stranded conductors) |
| DIN 48201-3-1984 |
電力電纜.鋼繩 |
(Steel stranded conductors) |
| DIN 48201-7-1981 |
電力電纜.銅包鋼絞線 |
(Copper clad steel stranded conductors) |
| DIN 48203-1-1984 |
銅導線用線材和絞線.交貨的技術條件 |
(Copper wires and copper stranded conductors; technical delivery conditions) |
| DIN 48203-2-1984 |
銅塑合金導線用線材和絞線.交貨技術條件 |
(Wrought copper alloy (Bz) wires and conductors; technical delivery conditions) |
| DIN 48203-7-1984 |
鋼銅導線用線材和絞線.交貨的技術條件 |
(Copper covered steel wires and copper covered steel stranded conductors; technical delivery conditions) |
| DIN 48207-1978 |
電力絞線.架空絞線的架設 |
(Stranded conductors; laying of stranded conductors for overhead lines) |
| DIN 48207-2-2005 |
額定電壓超過1KV的架空線.導體安裝的方法和設備.第2部分:電纜鉗 |
|
| DIN 48207-3-2005 |
額定電壓超過1KV的架空線.導體安裝的方法和設備.第3部分:帶球形接頭的電纜連接件 |
|
| DIN 48215-1978 |
電力架空線用端子和連接件.要求 |
(Clamps and connections for overhead power lines; requirements) |
| DIN 48217-1978 |
電力架空線和滑接饋線設備用缺口連接器 |
(Notch connectors) |
| DIN 483-1981 |
混凝土路邊石 |
(Concrete kerbs) |
| DIN 483-2004 |
混凝土路緣塊體.形狀、尺寸和標記 |
|
| DIN 483-2004 |
混凝土路緣塊體.形狀、尺寸和標記 |
|
| DIN 483-2005 |
混凝土路緣石塊體.形狀、尺寸和標記 |
|
| DIN 48300-1981 |
通信架空線用導線 |
(Wires for telecommunication lines) |
| DIN 48319-1962 |
電力架空線用鉤頭螺栓 |
(Hook screws) |
| DIN 48323-1957 |
通信電力架空線.拉索用夾緊裝置 |
(Telecommunication and power current overhead lines; turnbuckle for stay ropes) |
| DIN 48324-1959 |
1KV以下通信線路和電力架空線.系桿.墻板.環形螺母 |
(Telecommunication and power current overhead lines below 1 kV; tie bar, wall plate, lifting eye nut) |
| DIN 48327-1978 |
通信架空線用接線套管 |
(Jointing sleeves) |
| DIN 48328-1943 |
1KV以下通信和電力架空線.拉線桿 |
(Telecommunication and power current overhead lines below 1 kV; anchor logs) |
| DIN 48334-1977 |
螺旋扣.封閉型 |
(Turnbuckles for overhead power lines) |
| DIN 48335-1944 |
通信電力架空線.電纜夾 |
(Power current and telecommunication overhead lines; wire rope clamps) |
| DIN 48342-1947 |
通信電力架空線.鋼絲繩張緊夾 |
(Strain clamp for steel ropes) |
| DIN 48345-1968 |
攀登木電線桿用的腳扣 |
(Climbing irons for wooden poles) |
| DIN 48350-1954 |
通信電力架空線.木質電線桿 |
(Telecommunication and power current overhead lines; wooden poles) |
| DIN 48351 Bb.1-1967 |
電力架空線.A型電線桿.公式和計算原理 |
(A-masts; formulas and calculations) |
| DIN 48351-1-1967 |
電力架空線.A型電線桿.主要尺寸 |
(A-masts; main dimensions) |
| DIN 48351-2-1967 |
電力架空線.A型電線桿.螺栓.螺母.墊圈 |
(A-masts; bolts, nuts, washers) |
| DIN 48353-1-1965 |
20KV以下單線線路用鋼筋混凝土電線桿和橫梁 |
(Steel-concrete masts for simplex circuits up to 20 kV) |
| DIN 48353-2-1965 |
鋼筋混凝土電線桿和橫梁.電線桿的選用準則 |
(Steel-concrete masts; directions for choosing the masts) |
| DIN 4844-1 Berichtigung 1-2003 |
對DIN4844-1:2002-11的勘誤 |
(Corrigenda to DIN 4844-1:2002-11) |
| DIN 4844-1-2002 |
安全標志.第1部分:目視距離尺寸 |
(Safety marking - Part 1: Dimensions, distance of observation) |
| DIN 4844-2-2001 |
安全標志.第2部分:安全標志總覽 |
(Safety marking - Part 2: Overview of safety signs) |
| DIN 4844-2/A1-2004 |
安全識別.第2部分:安全符號概覽.修改件 A1 |
|
| DIN 4844-3-2003 |
安全標志.第3部分:逃生和營救示意圖 |
(Safety marking - Part 3: Escape- and rescueplan) |
| DIN 485-1987 |
人行道的混凝土鋪面石 |
(Precast concrete paving flags) |
| DIN 48500-1974 |
功率電容器.交貨技術條件 |
(Power capacitors; technical delivery conditions) |
| DIN 48600-1979 |
工業電熱裝置.感應加熱裝置用高頻設備的功率測量.高頻發生器輸出功率的測量方法 |
(Industrial electro-heat equipment; power measurement on high-frequency appliances for induction heating equipment, measuring method for determination of power output of high-frequency generators) |
| DIN 48699-1983 |
帶電作業輔助工具的標志 |
(Marking of tools for live working) |
| DIN 487-1971 |
界石.里程石 |
(Boundary stones; number stones) |
| DIN 488-1-1984 |
鋼筋.等級、特性和標志 |
(Reinforcing steels; grades, properties, marking) |
| DIN 488-2-1986 |
混凝土用鋼材.混凝土棒鋼.尺寸和重量.混凝土鋼.棒鋼 |
(Reinforcing steel; reinforcing steel bars; dimensions and masses) |
| DIN 488-4-1986 |
混凝土用鋼材.混凝土鋼網和混凝土鋼絲.結構.尺寸和重量 |
(Reinforcing steel; reinforcing steel fabric and wire; design, dimensions and masses) |
| DIN 488-6-1986 |
混凝土用鋼材.檢測(質量檢測) |
(Reinforcing steel; inspection) |
| DIN 488-7-1986 |
混凝土用鋼材.條鋼筋的焊接適應性的驗證.檢驗的實施和評價 |
(Reinforcing steel; verification of weldability of reinforcing steel bars; test procedure and evaluation) |
| DIN 48803-1985 |
避雷裝置.零部件配置和安裝尺寸 |
(Lightning protection system; arrangement of components and dimensions for mounting) |
| DIN 48804-1985 |
避雷裝置.導線和零件的固定件 |
(Lightning protection system; fixing parts for conductors and components) |
| DIN 48805-1989 |
避雷裝置.桿支架 |
(Lightning protection system; rod holders) |
| DIN 48806-1985 |
避雷裝置.導線和零件的名稱和概念 |
(Lightning protection system; terms and definitions for conductors and components) |
| DIN 48810-2001 |
避雷裝置.火星間隙.要求,試驗 |
(Lightning protection system - Spark gap - Requirements, tests) |
| DIN 48811-1985 |
避雷裝置.軟屋頂用導線架.夾緊蓋 |
(Lightning protection system; roof conductor holders for highly combustible roofs; span cap) |
| DIN 48812-1985 |
避雷裝置.軟屋頂用導線架.木桿 |
(Lightning protection system; roof conductor holders for highly combustible roofs; wooden stake) |
| DIN 48820-1967 |
圖樣上避雷防護構件用示意圖 |
(Symbols for building parts for lightning protection in drawings) |
| DIN 48821-1985 |
避雷裝置.號碼牌 |
(Lightning protection system; number plates) |
| DIN 48827-1985 |
避雷裝置.軟屋頂用導線支架.檐口支架和卡箍 |
(Lightning protection system; roof conductor holders for highly combustible roofs; dripping support and strain block) |
| DIN 48828-1989 |
避雷裝置.導線支架 |
(Lightning protection system; conductor holders) |
| DIN 48829-1985 |
避雷裝置.屋頂導線架.平屋頂?shù)膶?dǎo)線架和固定板 |
(Lightning protection system; roof conductor holders; conductor holders and fixing plates for flat roofs) |
| DIN 48830-1985 |
避雷裝置.說明書 |
(Lightning protection system; description) |
| DIN 48831-1985 |
避雷裝置.檢驗報告 |
(Lightning protection system; test report) |
| DIN 48832-1985 |
避雷裝置.集電極板 |
(Lightning protection system; mushroom-type collector) |
| DIN 48839-1985 |
避雷裝置.隔離箱和隔離柜架 |
(Lightning protection system; inspection box and frame for testing joints) |
| DIN 4890-1975 |
英寸-毫米.換算依據 |
(Inch - Millimetre; Fundamentals for Conversion) |
| DIN 4892-1975 |
英寸-毫米.換算表 |
(Inch - Millimetre; Conversion Tables) |
| DIN 4893-1965 |
毫米-英寸.1-10000mm換算表 |
(Millimetre - inch; conversion tables from 1 up to 10000 mm) |
| DIN 4895-1-1977 |
正交坐標系.一般概念 |
(Orthogonal coordinate systems; general concepts) |
| DIN 4895-2-1977 |
正交坐標系.向量分析的微分算子 |
(Orthogonal coordinate systems; differential operators of vector analysis) |
| DIN 4896-1973 |
簡單的電解溶液.符號 |
(Simple electrolyte solutions; symbols) |
| DIN 4898-1975 |
德語詞條“雙關“、“反義“、“同義“和“補充詞“的使用 |
(The use of the German terms “dual“, “invers“, “reziprok“, “剄uivalent“, “komplement剅“) |
| DIN 4899-1978 |
線性多端口 |
(Linear electric multiports) |
| DIN 49003-1956 |
安裝管.鋼制鎧裝管和插管用彎頭 |
(Conduit for electrical wiring; arches for steel armoured conduits and plain conduits) |
| DIN 49005-1956 |
安裝管.鋼制鎧裝管和插管用末端管套 |
(Conduit for electrical wiring; bushing nipples for steel armoured conduits) |
| DIN 49012-1982 |
電氣配線用導管和附件.適于重機械應力的金屬軟管.結構形式和要求 |
(Conduits and fittings for electrical installation; flexible metal conduits for heavy mechanical stresses construction types and requirements) |
| DIN 49016-1-1979 |
電氣配線用導管和附件.剛性耐火絕緣材料管和附件.中型和重型壓力負荷用管.光滑套管.彎頭 |
(Conduits and fittings for electrical installation; rigid non-flame propagating insulating conduits and fittings, plain conduits couplers and bends for medium and heavy pressure strength) |
| DIN 49016-2-1981 |
電氣配線用導管和附件.剛性耐火絕緣材料管和附件.中型和重型壓力負荷用光滑套管.套管彎頭 |
(Conduits and fittings for electrical installation; rigid non-flame propagating insulating conduits and fittings; plain conduits with coupler and bends with coupler for medium and heavy pressure strength) |
| DIN 49017-1-1979 |
電氣配線用導管和附件.剛性耐火絕緣材料管和附件.輕型壓力負荷用管.光滑套管.彎頭 |
(Conduits and fittings for electrical installation; rigid non-flame propagating insulating conduits and fittings, plain couplers and bends for light pressure strength) |
| DIN 49017-2-1981 |
電氣配線用導管和附件.剛性耐火絕緣材料管和附件.輕型壓力負荷用光滑套管.套管彎頭 |
(Conduits and fittings for electrical installation; rigid nonflame propagating insulating conduits and fittings; plain conduits with coupler and bends with coupler for light pressure strength) |
| DIN 49018-1-1972 |
電氣配線用導管和附件.柔性耐火絕緣材料管和附件.中型和輕型壓力負荷用波紋套管 |
(Conduits and fittings for electrical installation; flexible corrugated and inflammable conduits of insulating material and couplers for middle and light pressure load) |
| DIN 49018-2-1972 |
電氣配線用導管和附件.柔性耐火絕緣材料管.重型壓力負荷用帶光滑套波紋套管 |
(Conduits and fittings for electrical installation; flexible corrugated and inflammable conduits of insulating material with plain mantle and for heavy pressure load) |
| DIN 49019-1-1972 |
電氣配線用導管和附件.柔性不耐火絕緣材料管.中型和輕型壓力負荷用光滑管 |
(Conduits for electrical installation; flexible plain and non inflammable conduits of insulating material for middle and light pressure load) |
| DIN 49019-2-1978 |
電氣配線用導管和附件.柔性不耐火絕緣材料管.中型壓力負荷用光滑管 |
(Conduits for electrical installation; flexible plain and non inflammable conduits of insulating material for medium pressure load) |
| DIN 49019-3-1975 |
電氣配線用導管和附件.柔性不耐火波形絕緣材料管耐輕壓和105℃以下 |
(Conduits and fittings for electrical installation; flexible corrugated and non inflammable conduits of insulating material for light pressure load and a heat resistance up to 105 C) |
| DIN 4902-1972 |
地面運輸工具；手推車和拖車.動輪.符號.術語.說明 |
(Industrial trucks, hand-carriage and trailer, movement-wheels, symbols, terms, explanations) |
| DIN 49020-1959 |
電氣配線用導管.螺口鋼制導管.平口導管.管接頭 |
(Conduit for Electrical Wiring; Screwed Steel Conduit, Plain Conduit, Couplers) |
| DIN 49023-1975 |
電氣配線用導管和附件.高壓力負荷用柔性波紋鋼管 |
(Conduits and fittings for electrical installation; flexible corrugated conduits of steel) |
| DIN 49049-1960 |
對鋼鎖裝管內徑的導線分配 |
(Allocation of the lines to the pipe diameters of steel armoured conduits) |
| DIN 49073-1-1990 |
金屬制儀表盒和16A250V以下裝修輔助儀器用絕緣材料.主要尺寸 |
(Metal boxes and boxes of isulating material for accomodation of accessories up to 16 A 250 V; main dimensions) |
| DIN 49073-3-1999 |
符合DIN49445,DIN49447和DINEN60309-2(VDE0626第20部分)要求,32A690V以下的插接盒的沉入安裝用金屬制儀器盒 |
(Metal boxes and boxes of insulating material for recessed mounting for accommodation of socket-outlets according to DIN 49445, DIN 49447 and DIN EN 60309-2 (VDE 0623 Teil 20) up to 32 A 690 V - Main dimensions) |
| DIN 49075-1-1989 |
裝入帶φ45mm孔經和固定接頭的儀表盒的電器安裝儀表用蓋板.主要尺寸 |
(Cover plates for use with switches, socket-outlets and other accessories intended to be mounted into mounting boxes with openings having a diameter of 45 mm and with specified inserts; main dimensions) |
| DIN 49075-2-1989 |
裝入孔徑不是φ45mm.不帶接頭的儀表盒的電器安裝儀表用蓋板.主要尺寸 |
(Cover plates for use with switches, socket-outlets and other accessories intended to be mounted into mounting boxes with openings other than of diameter 45 mm without inserts; main dimensions) |
| DIN 49076-1989 |
電器儀表安裝用電器安裝槽面板的開口.主要尺寸 |
(Openings in front covers of ducting and trunking for use with switches, socket-outlets and other accessories to be mounted into mounting boxes; main dimensions) |
| DIN 49100-1987 |
帶保護觸點DC.10A.250V.AC16A250V和16A250V以下室內布線開關的兩極接線盒用基座.固定尺寸 |
(Base for two-pole socket-outlets with earthing contacts 10 A 250 V d.c., 16 A 250 V a.c. and switches up to 16 A 250 V; mounting dimensions) |
| DIN 4918-1989 |
加固鉆孔用帶螺紋連接的無縫鉆管 |
(Screwed seamless casing pipes) |
| DIN 49200-1987 |
２５０Ｖ.１６Ａ以下的室內布線開關 |
(Switches up to 16 A 250 V for flush and surface mounting) |
| DIN 4922-1-1978 |
帶開槽搭接孔和魚尾板連接的鉆井用鋼制濾管 |
(Steel Filter Pipes for Drilled Wells with Slot Perforation and Fisching (Butt Strap Joint)) |
| DIN 4922-2-1981 |
鉆井用鋼過濾器.螺紋連接.DN100至DN500 |
(Steel Filter Pipes for Drilled Wells with Screwed Connection DN 100 to DN 500) |
| DIN 4922-3-1975 |
鉆井用鋼濾管.法蘭連接.公稱直徑500至1000 |
(Steel Filter Pipes for Drilled Wells; Flanged Connection, NW 500 to NW 1000 (Nominal Diameter 500 to 1000)) |
| DIN 4922-4-1999 |
鉆井用鋼濾管.第4部分:DN100至DN500抗拉插接套管連接件 |
(Steel filter pipes for drilled wells - Part 4: With tension proof socket joint; DN 100 to DN 500) |
| DIN 4924-1998 |
水井結構用砂和砂礫.要求和檢驗 |
(Sands and gravels for well construction - Requirements and testing) |
| DIN 4925-1-1999 |
鉆井用未增塑聚氯乙烯過濾管和實壁管.第1部分:帶惠氏標準管螺紋DN35至DN100 |
(Well screens and casings of unplasticized polyvinylchloride (PVC-U) for tube wells - Part 1: DN 35 to DN 100 with Whitworth-pipe thread) |
| DIN 4925-2-1999 |
鉆井用未增塑聚氯乙烯過濾管和實壁管.第2部分:帶梯形螺紋的DN100-DN200 |
(Well screens and casings of unplasticized polyvinylchloride (PVC-U) for tube wells - Part 2: DN 100 to DN 200 with trapezoidal thread) |
| DIN 4925-3-1999 |
鉆井用未增塑聚氯乙烯過濾管和實壁管.第3部分:帶梯形螺紋的DN250至DN400 |
(Well screens and casings of unplasticized polyvinylchloride (PVC-U) for tube well - Part 3: DN 250 to DN 400 with trapezoidal thread) |
| DIN 4926-1995 |
鋼制井頭.DN400至DN1200 |
(Steel wellheads - ND 400 to ND 1200) |
| DIN 4927-1995 |
水輸送用鋼制法蘭提升管.DN50至DN200 |
(Flanged steel rising pipes for raising of water - Nominal diameter 50 to 200) |
| DIN 49284-1963 |
帶有T標記.交流250V.15A和交流380V.10A的兩極儀表開關.安裝尺寸 |
(Two-pole plug switch with T-symbol for hot conditions; mounting dimensions) |
| DIN 49290-1961 |
電氣安裝器材.開關的標識 |
(Classification of switches according to connections) |
| DIN 4930-1989 |
通風井的冷卻外管及連接.尺寸和交貨技術條件 |
(Pipes for use in freezing shaft sinking; dimensions and technical delivery conditions) |
| DIN 49300-1979 |
D熔斷器.一覽表 |
(D-type fuses; synopsis) |
| DIN 49301-1985 |
D熔斷器.D型旋入式接觸螺釘?shù)穆菁y.DⅡ和DⅢ型 |
(D-type fuses; withworth thread for screw-in gauge rings D II and D III) |
| DIN 49325-1980 |
D型環形接觸螺釘用E１６.２５A(chǔ).５００V內裝式帶蓋正面接線的D型熔斷器底座 |
(D-type fuse-bases E 16, 25 A, 500 V, for front connection, with cover, for flush mounting, for gauge rings) |
| DIN 49326-1-1985 |
D型環形接觸螺釘用DⅡ.２５A(chǔ).５００V內裝式帶蓋正面接線的D型熔斷器底座 |
(D-type fuse-bases D II 25 A 500 V for front connection, with cover, for flush mounting, for gauge rings) |
| DIN 49326-2-1985 |
D型環形接觸螺釘用DⅡ.２５A(chǔ).５００V內裝式不帶蓋正面接線的D型熔斷器底座 |
(D-type fuse-bases D II 25 A 500 V for front connection, without cover, for flush mounting, for gauge rings) |
| DIN 49327-1-1985 |
D型環形接觸螺釘.DⅡ63A.660V以下正面接線內裝式帶蓋的D型熔斷器底座 |
(D-type fuse-bases D III 63 A up to 660 V for front connection, with cover, for flush mounting, for gauge rings) |
| DIN 49327-2-1985 |
D型環形接觸螺釘.DⅢ63A.660V以下正面接線內裝式不帶蓋的D型熔斷器底座 |
(D-type fuse-bases D III 63 A up to 660 V for front connection, without cover, for flush mounting, for gauge rings) |
| DIN 49328-1985 |
D型環形接觸螺釘.DⅢ63A.750V正面接線的D型熔斷器底座 |
(D-type fuse-bases for front connection, for push-in gauge rings, D III 63 A 750 V) |
| DIN 49329-1985 |
DⅣ100A.750V正面接線的D型熔斷器底座 |
(D-type fuse-bases for front connection; D IV 100 A 750 V) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com