標準號 |
中文名稱 |
英文名稱 |
| DIN EN 61248-4-1998 |
電子和電信設備用變壓器和電感器.第4部分:有合格認證的開關式供電用電力變壓器的分規范 |
(Transformers and inductors for use in electronic and telecommunication equipment - Part 4: Sectional specification for power transformers for switched mode power supplies (SMPS) on the basis of the capability approval procedure (IEC 61248-4:1996); German |
| DIN EN 61248-5-1998 |
電子和電信設備用變壓器和電感器.第5部分:有合格認證的脈沖變壓器的分規范 |
(Transformers and inductors for use in electronic and telecommunication equipment - Part 5: Sectional specification for pulse transformers on the basis of the capability approval procedure (IEC 61248-5:1996); German version EN 61248-5:1997) |
| DIN EN 61248-6-1998 |
電子和電信設備用變壓器和電感器.第6部分:有合格認證的電感器的分規范 |
(Transformers and inductors for use in electronic and telecommunication equipment - Part 6: Sectional specification for inductors on the basis of the capability approval procedure (IEC 61248-6:1996); German version EN 61248-6:1997) |
| DIN EN 61248-7-1998 |
電子和電信設備用變壓器和電感器.第7部分:以合格認證為基礎的HF-電感器和ZF-變壓器的分規范 |
(Transformers and inductors for use in electronic and telecommunication equipment - Part 7: Sectional specification for high frequency inductors and intermediate frequency transformers on the basis of the capability approval procedure (IEC 61248-7:1996); |
| DIN EN 61249-2-10 Berichtigung 1-2005 |
印制板和其它互聯結構用材料.第2-10部分:包被和非包被增強基材.阻燃型(垂直燃燒試驗)銅包被改良或未改良的氰酸酯溴化環氧編織E型玻璃纖維增強層壓板 |
|
| DIN EN 61249-2-10-2004 |
印制板和其它互連結構用材料.第2-10部分:包被和非包被增強基材.規定了易燃性的包銅的改良或未改良的氰酸酯 |
(Materials for printed boards and other interconnecting structures - Part 2-10: Reinforced base materials clad and unclad - Cyanate ester, brominated epoxide, modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vert) |
| DIN EN 61249-2-10-2004 |
印制板和其它互連結構用材料.第2-10部分:包被和非包被增強基材.規定了易燃性的包銅的改良或未改良的氰酸酯溴化環氧樹脂編織E型玻璃纖維增強層壓板(垂直燃燒試驗) |
|
| DIN EN 61249-2-11 Berichtigung 1-2005 |
印制板和其他互聯結構用材料.第2-11部分:包被和非包被增強基材.阻燃型(垂直燃燒試驗)銅包被的聚酰亞胺溴化環氧改良或非改良的編織E型玻璃纖維增強層壓板 |
|
| DIN EN 61249-2-11-2004 |
印制板和其它互連結構用材料.第2-11部分:包被和非包被增強基材料.阻燃型銅包被的聚酰亞胺溴化環氧改良或非改良的編織E型玻璃纖維增強疊層板材(垂直燃燒試驗) |
|
| DIN EN 61249-2-12-1999 |
印制板和其它互連結構用材料.第2-12部分:涂覆或未涂覆增強基底材料分規范集.限定可燃性的銅包被環氧樹脂非 |
(Materials for printed boards and other interconnecting structures - Part 2-12: Sectional specification set for reinforced base materials, clad and unclad; epoxide non-woven aramid laminate of defined flammability, copper-clad (IEC 61249-2-12:1999); Germa |
| DIN EN 61249-2-13-1999 |
印制板和其它互連結構用材料.第2-13部分:涂覆或未涂覆增強基底材料分規范集.限定可燃性的銅包被氰酸酯非編 |
(Materials for printed boards and other interconnecting structures - Part 2-13: Sectional specification set for reinforced base materials, clad and unclad; cyanate ester non-woven aramid laminate of defined flammability, copper clad (IEC 61249-2-13:1999); |
| DIN EN 61249-2-18-2002 |
印制板和其它互連結構用材料.第2-18部分:包覆或非包覆增強基材.規定了易燃性的聚酯非編織玻璃纖維增強層壓 |
(Materials for printed boards and other interconnecting structures - Part 2-18: Reinforced base materials clad and unclad; Polyester non-woven fibreglass laminated sheet of defined flammability (vertical burning test), copper-clad(IEC 61249-2-18:2002); Ge |
| DIN EN 61249-2-19-2002 |
印制板和其它互連結構用材料.第2-19部分:包被和非包被增強基材料.規定燃燒性的環氧交叉簾布層線性纖維玻璃 |
(Materials for printed boards and other interconnecting structures - Part 2-19: Reinforced base materials, clad and unclad; Epoxide cross-plied linear fibreglass-reinforced laminated sheets of defined flammability (vertical burning test), copper clad (IEC |
| DIN EN 61249-2-21-2004 |
印制板和其它互連結構用材料.第2-21部分:包被和非包被增強基材料.阻燃型銅包被的非鹵代環氧編織E型玻璃纖維增強疊層板材(垂直燃燒試驗) |
|
| DIN EN 61249-2-4-2002 |
印制板和其它互連結構用材料.第2-4部分:包被和非包被增強基材.規定了易燃性的覆銅聚酯非編織/編織玻璃纖維 |
(Materials for printed boards and other for interconnecting structures - Part 2-4: Reinforced base materials, clad and unclad; Polyester non-wowen/woven fibreglass laminated sheet of defined flammability (vertical burning test), copper-clad(IEC 61249-2-4: |
| DIN EN 61249-2-5 Berichtigung 1-2005 |
印制板和其他互聯結構用材料.第2-5部分:包被和非包被增強基材.阻燃型(垂直燃燒試驗)銅包被的溴化環氧纖維素紙?jiān)鰪?qiáng)芯/編織的E型玻璃增強表面層壓板 |
|
| DIN EN 61249-2-5-2004 |
印制板和其它互連結構用材料.第2-5部分:包被和非包被增強基材料.阻燃型銅包被的溴化環氧纖維素紙?jiān)鰪?qiáng)芯/編織E型玻璃纖維增強表面疊層板材(垂直燃燒試驗) |
|
| DIN EN 61249-2-6 Berichtigung 1-2005 |
印制板和其他互聯結構用材料.第2-6部分:包被和非包被增強基材.阻燃型(垂直燃燒試驗)銅包被的溴化環氧非編織/編織的E型玻璃增強表面層壓板 |
|
| DIN EN 61249-2-6-2004 |
印制板和其它互連結構用材料.第2-6部分:包被和非包被增強基材料.阻燃型銅包被的溴化環氧非編織/編織E型玻璃纖維增強疊層板材(垂直燃燒試驗) |
|
| DIN EN 61249-2-7-2002 |
印制板和其它互連結構用材料.第2-7部分:包被和非包被增強基材.規定了易燃性的環氧編織E級覆銅層壓板(垂直燃 |
(Materials for printed boards and other interconnecting structures - Part 2-7: Reinforced base materials clad and unclad; Epoxide woven E-glass laminated sheet of defined flammability (vertical burning test), copper-clad(IEC 61249-2-7:2002); German versio |
| DIN EN 61249-2-8-2004 |
印制板和其它互連結構用材料.第2-8部分:包被和非包被增強基材.規定了易燃性的包銅的改良溴化環氧樹脂編織玻 |
(Materials for printed boards and other interconnecting structures - Part 2-8: Reinforced base materials, clad and unclad - Modified brominated epoxide woven fibreglass reinforced laminate sheets of defined flammability (vertical burning test), copper-cla |
| DIN EN 61249-2-8-2004 |
印制板和其它互連結構用材料.第2-8部分:包被和非包被增強基材.規定了易燃性的包銅的改良溴化環氧樹脂編織玻璃纖維增強層壓板(垂直燃燒試驗) |
|
| DIN EN 61249-2-9-2004 |
印制板和其它互連結構用材料.第2-9部分:包被和非包被增強基材.規定了易燃性的包銅的二順丁烯二酰亞胺/三嗪 |
(Materials for printed boards and other interconnecting structures - Part 2-9: Reinforced base materials clad and unclad - Bismaleimide/triazine, modified epoxide or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical) |
| DIN EN 61249-2-9-2004 |
印制板和其它互連結構用材料.第2-9部分:包被和非包被增強基材.規定了易燃性的包銅的二順丁烯二酰亞胺/三嗪改良或未改良的環氧樹脂編織E型玻璃纖維增強層壓板(垂直燃燒試驗) |
|
| DIN EN 61249-3-3-1999 |
印制板和其它互連結構用材料.第3-3部分:涂覆和未涂覆非增強基底材料(用于撓性印制板)的分規范集.粘性涂覆撓 |
(Materials for printed boards and other interconnecting structures - Part 3-3: Sectional specification set for unreinforced base materials, clad and unclad (intended for flexible printed boards); adhesive coated flexible polyester film (IEC 61249-3-3:1999 |
| DIN EN 61249-3-4-1999 |
印制板和其它互連結構用材料.第3-4部分:涂覆和未涂覆非增強基底材料(用于撓性印制板)的分規范集.粘性涂覆撓 |
(Materials for printed boards and other interconnecting structures - Part 3-4: Sectional specification set for unreinforced base materials, clad and unclad (intended for flexible printed boards); adhesive coated flexible polyimide film (IEC 61249-3-4:1999 |
| DIN EN 61249-3-5-1999 |
印制板和其它互連結構用材料.第3-5部分:涂覆和未涂覆非增強基底材料(用于撓性印制板)的分規范集.貼花粘性薄 |
(Materials for printed boards and other interconnecting structures - Part 3-5: Sectional specification set for unreinforced base materials, clad and unclad (intended for flexible printed boards); transfer adhesive films (IEC 61249-3-5:1999); German versio |
| DIN EN 61249-5-1-1996 |
連接結構用材料.第5部分:帶和不帶涂層的導電箔和薄膜的分規范.第1節:銅箔(用于生產銅涂覆基材) |
(Materials for interconnection structures - Part 5: Sectional specification set for conductive foils and films with and without coatings; section 1: Copper foils (for the manufacturer of copper-clad base materials) (IEC 61249-5-1:1995); German version EN |
| DIN EN 61249-5-4-1997 |
連接結構用材料.第5部分:帶或不帶涂層的導電箔和薄膜的分規范.第4節:導電油墨 |
(Materials for interconnection structures - Part 5: Sectional specification set for conductive foils and films with or without coatings; section 4: Conductive inks (IEC 61249-5-4:1996); German version EN 61249-5-4:1996) |
| DIN EN 61249-7-1-1996 |
連接結構用材料.第7部分:緊約束芯材料分規范.第1節:銅/殷鋼/銅 |
(Materials for interconnection structures - Part 7: Sectional specification set for restraining core materials; section 1: Copper/Invar/copper (IEC 61249-7-1:1995); German version EN 61249-7-1:1995) |
| DIN EN 61249-8-7-1997 |
連接結構用材料.第8部分:非導電薄膜和涂層用分規范.第7節:打印油墨 |
(Materials for interconnection structures - Part 8: Sectional specification set for non-conductive films and coatings; section 7: Marking legend inks (IEC 61249-8-7:1996); German version EN 61249-8-7:1996) |
| DIN EN 61249-8-8-1998 |
連接結構用材料.第8部分:不導電薄膜和涂層分規范.第8節:臨時性聚合物涂層 |
(Materials for interconnection structures - Part 8: Sectional specification set for non-conductive films and coatings; Section 8: Temporary polymer coatings (IEC 61249-8-8:1997); German version EN 61249-8-8:1997) |
| DIN EN 61252-2003 |
電聲學.專用測聲表規范 |
(Electroacoustics - Specifications for personal sound exposure meters (IEC 61252:1993 + A1:2000); German version EN 61252:1995 + A1:2001) |
| DIN EN 61254-1994 |
家用電動剃刀.性能測量法 |
(Electric shavers for household use - Methods for measuring the performance (IEC 61254:1993); German version EN 61254:1994) |
| DIN EN 61255-1995 |
家用電熱墊.性能測量方法 |
(Household electric heating pads - Methods for measuring performance (IEC 61255:1994); German version EN 61255:1994) |
| DIN EN 61259-1996 |
額定電壓為72.5KV及以上氣絕緣,金屬封殼開關裝置.接通電容電流的隔離開關的要求 |
(Gas-insulated metal-enclosed switchgear for rated voltages of 72,5 kV and above - Requirements for switching of bus-charging currents by disconnectors (IEC 61259:1994); German version EN 61259:1994) |
| DIN EN 61260-2003 |
電聲學.分倍頻程頻帶和頻程頻帶用倍頻濾波器 |
(Electroacoustics - Octave-band and fractional-octave-band filters (IEC 61260:1995 + A1:2001); German version EN 61260:1995 + A1:2001) |
| DIN EN 61262-1-1995 |
醫療電氣設備.電光X射線圖象增強器的特性.第1部分:入口尺寸的測定 |
(Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 1: Determination of the entrance field size (IEC 61262-1:1994); German version EN 61262-1:1994) |
| DIN EN 61262-2-1995 |
醫療電氣設備.電光X射線圖象增強器的特性.第2部分:變換系數的測定 |
(Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 2: Determination of the conversion factor (IEC 61262-2:1994); German version EN 61262-2:1994) |
| DIN EN 61262-3-1995 |
醫療電氣設備.電光X射線圖象增強器的特性.第3部分:亮度分配和亮度不均勻的測定 |
(Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 3: Determination of the luminance distribution and luminance non-uniformity (IEC 61262-3:1994); German version EN 61262-3:1994) |
| DIN EN 61262-4-1995 |
醫療電氣設備.電光X射線圖象增強器的特性.第4部分:圖象失真的測定 |
(Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 4: Determination of the image distortion (IEC 61262-4:1994); German version EN 61262-4:1994) |
| DIN EN 61262-5-1995 |
醫療電氣設備.電光X射線圖象增強器的特性.探測量回收率測定 |
(Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 5: Determination of the detective quantum efficiency (IEC 61262-5:1994); German version EN 61262-5:1994) |
| DIN EN 61262-6-1995 |
醫療電氣設備.電光X射線圖象增強器的特性.第3部分:對比率和雜光指數的測定 |
(Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 6: Determination of the contrast ratio and veiling glare index (IEC 61262-6:1994); German version EN 61262-6:1994) |
| DIN EN 61262-7-2002 |
醫療電氣設備.電光X射線圖像增強器的特性.第7部分:調制變壓器的功能測定 |
(Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 7: Determination of the modulation transfer function (IEC 61262-7:1995); German version EN 61262-7:2001) |
| DIN EN 61264 Berichtigung 1-1999 |
對DINEN61264(VDE0674第3部分):1999-06的校正 |
(Corrigendum to DIN EN 61264 (VDE 0674 Part 3):1999-06) |
| DIN EN 61264-1999 |
高壓開關裝置和開關設備用陶瓷增壓空芯絕緣子 |
(Ceramic pressurized hollow insulators for high-voltage switchgear and controlgear (IEC 61264:1998); German version EN 61264:1998) |
| DIN EN 61265-1999 |
電聲學.飛機噪音測量?jī)x.運輸機噪音鑒定時三度音程頻帶聲壓級測量系統的性能要求 |
(Electroacoustics - Instruments for measurement of aircraft noise - Performance requirements for systems to measure one-third-octave band sound pressure levels in noise certification of transport-category aeroplanes (IEC 61265:1995); German version EN 612 |
| DIN EN 61266-1996 |
超聲波.手持式傳感式多普勒胎兒心跳探測儀.性能要求及測量和記錄方法 |
(Ultrasonics - Hand-held probe doppler foetal heartbeat detectors - Performance requirements and methods of measurement and reporting (IEC 61266:1994); German version EN 61266:1995) |
| DIN EN 61267-1997 |
醫療X射線診斷設備.特性測定的放射條件 |
(Medical diagnostic X-ray equipment - Radiation conditions for use in the determination of characteristics (IEC 61267:1994); German version EN 61267:1994) |
| DIN EN 61268-1996 |
交流電乏時計(精度等級2和3) |
(Alternating current static var-hour meters for reactive energy (classes 2 and 3) (IEC 61268:1995); German version EN 61268:1996) |
| DIN EN 61269-1-1-1997 |
光纖端件.第1部分第1節:空白詳細規范 |
(Fibre optic terminus sets - Part 1-1: Blank detail specification (IEC 61269-1-1:1994); German version EN 61269-1-1:1997) |
| DIN EN 61269-1-1997 |
光纖端件.第1部分:總規范 |
(Fibre optic terminus sets - Part 1: Generic specification (IEC 61269-1:1994); German version EN 61269-1:1997) |
| DIN EN 61270-1-1997 |
微波爐用電容器.第1部分:總則 |
(Capacitors for microwave ovens - Part 1: General (IEC 61270-1:1996); German version EN 61270-1:1996) |
| DIN EN 61274-1-1-1997 |
光纖適配器.第1部分第1節:空白詳細規范 |
(Fibre optic adaptors - Part 1-1: Blank detail specification (IEC 61274-1-1:1994); German version EN 61274-1-1:1997) |
| DIN EN 61274-1-1997 |
光纖適配器.第1部分:總規范 |
(Fibre optic adaptors - Part 1: Generic specification (IEC 61274-1:1994); German version EN 61274-1:1997) |
| DIN EN 61277-1999 |
地面光電(PV)發電系統.總則和指南 |
(Terrestrial photovoltaic (PV) power generating systems - General and guide (IEC 61277:1995); German version EN 61277:1998) |
| DIN EN 61280-1-1-1999 |
光纖通信分系統.基本檢驗方法.第1部分:一般通信分系統的檢驗方法 |
(Fibre optic communication subsystem basic test procedures - Part 1-1: Test procedures for general communication subsystems - Transmitter output optical power measurement for single-mode optical fibre cable (IEC 61280-1-1:1998); German version EN 61280-1- |
| DIN EN 61280-1-3-1999 |
光纖通信分系統.基本檢驗方法.第1-3部分:一般通信分系統的檢驗方法.中心波長和光譜寬度的測量 |
(Fibre optic communication subsystem basic test procedures - Part 1-3: Test procedures for general communication subsystems - Central wavelength and spectral width measurement (IEC 61280-1-3:1998); German version EN 61280-1-3:1999) |
| DIN EN 61280-2-1-1999 |
光纖通信分系統基本試驗程序.第2-1部分:數字系統的試驗程序.接收機靈敏度和過載測量 |
(Fibre optic communication subsystem basic test procedures - Part 2-1: Test procedures for digital systems; receiver sensitivity and overload measurement (IEC 61280-2-1:1998); German version EN 61280-2-1:1999) |
| DIN EN 61280-2-2-1999 |
纖維光學通信子系統基本試驗程序.第2-2部分:數字系統試驗程序.光學直視模型、波形和衰減比率 |
(Fibre optic communication subsystem basic test procedures - Part 2-2: Test procedures for digital systems; optical eye pattern, waveform, and extinction ratio (IEC 61280-2-2:1998); German version EN 61280-2-2:1999) |
| DIN EN 61280-2-4-1999 |
光纖通信分系統.基本檢驗方法.第2-4部分:數字系統的檢驗方法.比特速率容差的測量 |
(Fibre optic communication subsystem basic test procedures - Part 2-4: Test procedures for digital systems; bit-rate tolerance measurement (IEC 61280-2-4:1998); German version EN 61280-2-4:1998) |
| DIN EN 61280-2-5-1999 |
光纖通信分系統.基本檢驗方法.第2-5部分:數字系統檢驗方法.減幅振蕩變壓器傳輸功能的測量 |
(Fibre optic communication subsystem basic test procedures - Part 2-5: Test procedures for digital systems; jitter transfer function measurement (IEC 61280-2-5:1998); German version EN 61280-2-5:1998) |
| DIN EN 61280-2-8-2004 |
纖維光學通信子系統試驗程序.數字系統.第2-8部分:用品質因數測量法測定低位錯率 |
|
| DIN EN 61280-2-9-2003 |
纖維光學通信子系統試驗程序.第2-9部分:數字系統.密集波分復用系統用光學信噪比的測量 |
(Fibre optic communication subsystem test procedures - Part 2-9: Digital systems; Optical signal-to-noise ratio measurement for dense wavelength-division multiplexed systems (IEC 61280-2-9:2002); German version EN 61280-2-9:2002) |
| DIN EN 61280-4-1-2004 |
光纖通信子系統試驗程序.第4部分:電纜設備和鏈接.多模光纖電纜設備衰減測量 |
|
| DIN EN 61280-4-2-2001 |
光纖通信分系統基本試驗程序.第4-2部分:光纖電纜工廠.單模光纖電纜工廠衰減器 |
(Fibre optic communication subsystem basic test procedures - Part 4-2: Fibre optic cable plant - Single-mode fibre optic cable plant attenuation (IEC 61280-4-2:1999); German version EN 61280-4-2:1999) |
| DIN EN 61281-1-2000 |
光纖通信子系統.第1部分:總規范 |
(Fibre optic communication subsystems - Part 1: Generic specification (IEC 61281-1:1999); German version EN 61281-1:1999) |
| DIN EN 61284-1998 |
架空電線.配件的要求和檢驗 |
(Overhead lines - Requirements and tests for fittings (IEC 61284:1997); German version EN 61284:1997) |
| DIN EN 61285-1995 |
工業處理控制.分析器罩的安全 |
(Industrial-process control - Safety of analyser houses (IEC 61285:1994 + Corrigendum:1994); German version EN 61285:1994) |
| DIN EN 61286-1996 |
信息技術.電技術文獻制備及信息交換用圖形符號字符集 |
(Information technology - Coded graphic character set for use in the preparation of documents used in electrotechnology and for information interchange (IEC 61286:1995); German version EN 61286:1995) |
| DIN EN 61290-1-1-1999 |
光纖放大器.基本規范.第1-1部分:增強參數的檢測方法.光學光譜分析器 |
(Optical fibre amplifiers - Basic specification - Part 1-1: Test methods for gain parameters; optical spectrum analyzer (IEC 61290-1-1:1998); German version EN 61290-1-1:1998) |
| DIN EN 61290-1-2-1999 |
光纖放大器.基本規范.第1-2部分:增強參數的檢測方法.電氣光譜分析器 |
(Optical fibre amplifiers - Basic specification - Part 1-2: Test methods for gain parameters; electrical spectrum analyzer (IEC 61290-1-2:1998); German version EN 61290-1-2:1998) |
| DIN EN 61290-1-3-1999 |
光纖放大器.基本規范.第1-3部分:增強參數的檢測方法.光學功率測量?jī)x |
(Optical fibre amplifiers - Basic specification - Part 1-3: Test methods for gain parameters; optical power meter (IEC 61290-1-3:1998); German version EN 61290-1-3:1998) |
| DIN EN 61290-10-1-2004 |
光學放大器.試驗方法.第10-1部分:多道參數.使用光學開關和光譜分析儀的脈沖法 |
(Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer (IEC 61290-10-1:2003); German version EN 61290-10-1:2003) |
| DIN EN 61290-10-1-2004 |
光學放大器.試驗方法.第10-1部分:多道參數.使用光學開關和光譜分析儀的脈沖法 |
|
| DIN EN 61290-10-2-2004 |
光學放大器.試驗方法.第10-2部分:多道參數.選通光頻譜分析儀的脈沖法 |
(Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer (IEC 61290-10-2:2003); German version EN 61290-10-2:2003) |
| DIN EN 61290-10-2-2004 |
光學放大器.試驗方法.第10-2部分:多道參數.選通光頻譜分析儀的脈沖法 |
|
| DIN EN 61290-10-3-2004 |
光學放大器.試驗方法.第10-2部分:多道參數.探測法 |
(Optical amplifiers - test methods - Part 10-3: Multichannel parameters - Probe methods (IEC 61290-10-3:2002); German version EN 61290-10-3:2003) |
| DIN EN 61290-10-3-2004 |
光學放大器.試驗方法.第10-2部分:多道參數.探測法 |
|
| DIN EN 61290-11-2-2005 |
光學放大器.試驗方法.第11-2部分:偏振模式分散參數.Poincar偳蠣娣治齜椒?,#德語 |
|
| DIN EN 61290-2-1-1999 |
光纖放大器.基本規范.第2-1部分:光學功率參數的檢驗方法.光學光譜分析儀 |
(Optical fibre amplifiers - Basic specification - Part 2-1: Test methods for power parameters; optical spectrum analyzer (IEC 61290-2-1:1998); German version EN 61290-2-1:1998) |
| DIN EN 61290-2-2-1999 |
光纖放大器.基本規范.第2-1部分:光學功率參數的檢驗方法.電氣光譜分析儀 |
(Optical fibre amplifiers - Basic specification - Part 2-2: Test methods for power parameters; electrical spectrum analyzer (IEC 61290-2-2:1998); German version EN 61290-2-2:1998) |
| DIN EN 61290-2-3-1999 |
光纖放大器.基本規范.第2-3部分:光學功率參數的檢驗方法.光學功率測量?jī)x |
(Optical fibre amplifiers - Basic specification - Part 2-3: Test methods for optical power parameters; optical power meter (IEC 61290-2-3:1998); German version EN 61290-2-3:1998) |
| DIN EN 61290-3-1-2004 |
光學放大器.試驗方法.第3-1部分:噪音指數參數.光譜分析儀法 |
|
| DIN EN 61290-3-2-2003 |
光學放大器.第3-2部分:噪音指數參數的試驗方法.電頻譜分析儀法 |
(Optical amplifiers - Part 3-2: Test methods for noise figure parameters - Electrical spectrum analyzer method (IEC 61290-3-2:2003); German version EN 61290-3-2:2003) |
| DIN EN 61290-3-2001 |
光纖放大器.基本規范.第3部分:試驗方法和噪音圖形參數 |
(Optical fibre amplifiers - Basic specification - Part 3: Test methods for noise figure parameters (IEC 61290-3:2000); German version EN 61290-3:2000) |
| DIN EN 61290-5-1-2001 |
光纖放大器.基本規范.第5-1部分:試驗方法和反射參數.光譜分析器 |
(Optical fibre amplifiers - Basic specification - Part 5-1: Test methods for reflectance parameters; Optical spectrum analyser (IEC 61290-5-1:2000); German version EN 61290-5-1:2000) |
| DIN EN 61290-5-2-2004 |
光學放大器.試驗方法.第5-2部分:反射參數.電頻譜分析儀法 |
|
| DIN EN 61290-5-3-2002 |
光纖放大器的基本規范.第5-3部分:反射參數的試驗方法.使用電子光譜分析儀的反射比偏差 |
(Optical fibre amplifiers - Basic specification - Part 5-3: Test methods for reflectance parameters; Reflectance tolerance using an electrical spectrum analyser (IEC 61290-5-3:2002); German version EN 61290-5-3:2002) |
| DIN EN 61290-6-1-1999 |
光纖放大器.基本規范.第6-1部分:泵漏參數的試驗方法.光信號分離器 |
(Optical fibre amplifiers - Basic specification - Part 6-1: Test methods for pump leakage parameters; optical demultiplexer (IEC 61290-6-1:1998); German version EN 61290-6-1:1998) |
| DIN EN 61290-7-1-1999 |
光纖放大器.基本規范.第7-1部分:譜帶外介入損耗的檢驗方法.光學功率測量計和濾光計 |
(Optical fibre amplifiers - Basic specification - Part 7-1: Test methods for out-of-band insertion losses; filtered optical power meter (IEC 61290-7-1:1998); German version EN 61290-7-1:1998) |
| DIN EN 61291-1-1999 |
光纖放大器.第1部分:總規范 |
(Optical fibre amplifiers - Part 1: Generic specification (IEC 61291-1:1998); German version EN 61291-1:1998) |
| DIN EN 61291-2-2001 |
光纖放大器.第2部分:數字應用.性能規范模板 |
(Optical fibre amplifiers - Part 2: Digital applications; Performance specifications template (IEC 61291-2:2000); German version EN 61291-2:2000) |
| DIN EN 61291-4-2004 |
光學放大器.第4部分:多信道應用.性能規范模板 |
(Optical amplifiers - Part 4: Multichannel applications - Performance specification template (IEC 61291-4:2003); German version EN 61291-4:2003) |
| DIN EN 61291-4-2004 |
光學放大器.第4部分:多信道應用.性能規范模板 |
|
| DIN EN 61291-5-2-2003 |
光纖放大器.第5-2部分:合格鑒定規范.光纖放大器的可靠性合格鑒定 |
(Optical amplifiers - Part 5-2: Qualification specifications; Reliability qualification for optical fibre amplifiers (IEC 61291-5-2:2002); German version EN 61291-5-2:2002) |
| DIN EN 61293-1995 |
與電供給相關的帶有額定值的電氣設備的標記.安全要求 |
(Marking of electrical equipment with ratings related to electrical supply- Safety requirements (IEC 61293:1994); German version EN 61293:1994) |
| DIN EN 61297-1996 |
工業過程控制系統.鑒定用適配控制器的分類 |
(Industrial-process control systems - Classification of adaptive controllers for the purpose of evaluation (IEC 61297:1995); German version EN 61297:1995) |
| DIN EN 61298-1-1996 |
過程測量,控制和調節裝置.評定運行特性的一般方法和程序.第1部分:一般考慮和研究 |
(Process measurement and control devices - General methods and procedures for evaluating performance - Part 1: General considerations (IEC 61298-1:1995); German version EN 61298-1:1995) |
| DIN EN 61298-2-1996 |
過程測量,控制和調節裝置.評定運行特性的一般方法和程序.第2部分:基準條件下的檢驗 |
(Process measurement and control devices - General methods and procedures for evaluating performance - Part 2: Tests under reference conditions (IEC 61298-2:1995); German version EN 61298-2:1995) |
| DIN EN 61298-3-1998 |
過程測量,控制和調節裝置.評定運行特性的一般方法和程序.第3部分:影響值作用的檢驗 |
(Process measurement and control devices - General methods and procedures for evaluating performance - Part 3: Tests for the effects of influence quantities (IEC 61298-3:1998); German version EN 61298-3:1998) |
| DIN EN 61298-4-1996 |
過程測量,控制和調節裝置.評定運行特性的一般方法和程序.第4部分:評定報告的內容 |
(Process measurement and control devices - General methods and procedures for evaluating performance - Part 4: Evaluation report content (IEC 61298-4:1995); German version EN 61298-4:1995) |
| DIN EN 613-2001 |
獨立式燃?xì)鈱?duì)流加熱器 |
(Independent gas-fired convection heaters; German version EN 613:2000) |
| DIN EN 61300-1-1998 |
光纖互聯裝置和無源部件.基本試驗和測量步驟.第1部分:總則和指南 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance (IEC 61300-1:1995); German version EN 61300-1:1997) |
| DIN EN 61300-1-2004 |
纖維光學互連器件和無源件.基本試驗和測量程序.第1部分:總則和指南 |
|
| DIN EN 61300-2-1-2003 |
光纖互連裝置和無源部件.基本試驗和測量步驟.第2-1部分:振動(正弦)試驗 |
(Fibre Optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-1: Tests; Vibration (sinusoidal) (IEC 61300-2-1:2003); German version EN 61300-2-1:2003) |
| DIN EN 61300-2-10-1998 |
光纖互聯裝置和無源部件.基本試驗和測量步驟.第2-10部分:檢驗和徑向壓力 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-10: Tests; crush resistance (IEC 61300-2-10:1995); German version EN 61300-2-10:1997) |
| DIN EN 61300-2-11-1998 |
光纖互聯裝置和無源部件.基本試驗和測量步驟.第2-11部分:檢驗和軸向壓力 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-11: Tests; axial compression (IEC 61300-2-11:1995); German version EN 61300-2-11:1997) |
| DIN EN 61300-2-12-1998 |
光纖互聯裝置和無源部件.基本試驗和測量步驟.第2-12部分:檢驗.撞擊 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-12: Tests; impact (IEC 61300-2-12:1995); German version EN 61300-2-12:1997) |
| DIN EN 61300-2-13-1998 |
光纖互聯裝置和無源部件.基本試驗和測量步驟.第2-13部分:檢驗.均勻加速 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-13: Tests; acceleration (IEC 61300-2-13:1995); German version EN 61300-2-13:1997) |
| DIN EN 61300-2-14-1997 |
光纖互連設備和無源件.基本試驗和測量程序.第2-14部分:試驗.最大輸入功率 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-14: Tests - Maximum input power (IEC 61300-2-14:1997); German version EN 61300-2-14:1997) |
| DIN EN 61300-2-15-1998 |
光纖互聯件和無源部件.基本試驗和測量步驟.第2-15部分:檢驗:聯鎖裝置的抗扭強度 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-15: Tests: Torque strength of coupling mechanism (IEC 61300-2-15:1995); German version EN 61300-2-15:1997) |
| DIN EN 61300-2-16-1998 |
光纖互聯裝置和無源部件.基本試驗和測量步驟.第2-16部分:檢驗.長霉 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-16: Tests; mould growth (IEC 61300-2-16:1995); German version EN 61300-2-16:1997) |
| DIN EN 61300-2-17-1998 |
光纖互聯裝置和無源部件.基本試驗和測量步驟.第2-17部分:檢驗.冷凍 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-17: Tests; cold (IEC 61300-2-17:1995); German version EN 61300-2-17:1997) |
| DIN EN 61300-2-18-1998 |
光纖互聯裝置和無源部件.基本試驗和測量步驟.第2-18部分:檢驗.干熱疲勞試驗 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-18: Tests; dry heat, high temperature endurance (IEC 61300-2-18:1995); German version EN 61300-2-18:1997) |
| DIN EN 61300-2-19-1998 |
光纖互聯裝置和無源部件.基本試驗和測量步驟.第2-19部分:檢驗.濕熱(恒量) |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-19: Tests; damp heat (steady state) (IEC 61300-2-19:1995); German version EN 61300-2-19:1997) |
| DIN EN 61300-2-2-2003 |
光纖互連裝置和無源部件.基本試驗和測量步驟.第2-2部分:配合耐久性試驗 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-2: Tests; Mating durability (IEC 61300-2-2:2003); German version EN 61300-2-2:2003) |
| DIN EN 61300-2-20-1998 |
光纖互聯件和無源部件.基本試驗和測量步驟.第2-20部分:檢驗:氣候順序 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-20: Tests: Climatic sequence (IEC 61300-2-20:1995); German version EN 61300-2-20:1997) |
| DIN EN 61300-2-21-1998 |
光纖互聯裝置和無源部件.基本試驗和測量步驟.第2-21部分:檢驗.循環溫度/濕度 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-21: Tests; composite temperature-humidity cyclic test (IEC 61300-2-21:1995); German version EN 61300-2-21:1997) |
| DIN EN 61300-2-22-1998 |
光纖互聯裝置和無源部件.基本試驗和測量步驟.第2-22部分:檢驗,溫度變換 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-22: Tests; change of temperature (IEC 61300-2-22:1995); German version EN 61300-2-22:1997) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com