標準號 |
中文名稱 |
英文名稱 |
| DIN ISO 8620-1992 |
塑料.酚醛樹脂粉.用空氣噴射的篩濾器械的篩分析 |
(Plastics; phenolic resin powder; sieve analysis using air-jet sieve apparatus; identical with ISO 8620:1986) |
| DIN ISO 8623-1998 |
油漆和清漆用高脂油脂肪酸.規范和試驗方法 |
(Tall-oil fatty acids for paints and varnishes - Specifications and test methods (ISO 8623:1997)) |
| DIN ISO 8640-3-2003 |
紡織機械和附件.平經針織機.詞匯.第3部分:制模器械的詞匯 |
(Textile machinery and accessories - Flat warp knitting machines - Part 3: Vocabulary of pattering devices (ISO 8640-3:2002)) |
| DIN ISO 8640-4-1997 |
紡織機械和附件.平經針織機.術語.第4部分:縫編機械及設備 |
(Textile machinery and accessories - Flat warp knitting machines, vocabulary - Part 4: Stitch bonding machines and stitch bonding devices (ISO 8640-4:1996)) |
| DIN ISO 8648-1990 |
信息處理系統.開式系統互連.網絡層的內部結構 |
(Open systems interconnection; internal organization of the network layer; identical with ISO 8648:1988) |
| DIN ISO 8658-2003 |
鋁制品用碳質材料.未燒結的和煅燒的焦炭.火焰原子吸收光譜法測定痕量素 |
(Testing of carbonaceous materials - Green and calcined coke - Determination of trace elements by flame atomic absorption spectroscopy (ISO 8658:1997)) |
| DIN ISO 8667-1993 |
大型載重車和大型客車.十字齒齒輪箱法蘭.T型 |
(Commercial vehicles and buses; cross-tooth gearbox flanges, type T; identical with ISO 8667:1992) |
| DIN ISO 8693-2000 |
模壓工具.平起模桿 |
(Tools for moulding - Flat ejector pins (ISO 8693:1998)) |
| DIN ISO 8694-2000 |
模壓工具.有肩的起模桿 |
(Tools for moulding - Shouldered ejector pins (ISO 8694:1998)) |
| DIN ISO 8719-1988 |
商業用車輛和大型客車.齒輪傳動空氣壓縮機用四孔法蘭盤 |
(Commercial vehicles and buses; four-hole flanges for gear-driven air compressors; identical with ISO 8719, edition 1986) |
| DIN ISO 8756-1996 |
空氣質量.溫度,壓力和濕度的數據處理 |
(Air quality - Handling of temperature, pressure and humidity data (ISO 8756:1994)) |
| DIN ISO 8758-1997 |
電影技術.在16mm和35mm電影膠片和拷貝上的影相圖形的控制記錄和數據記錄.尺寸和定位 |
(Cinematography - Photographic control and data records on 16 mm and 35 mm motion-picture film and prints - Dimensions and location (ISO 8758:1992)) |
| DIN ISO 8759-1-1999 |
農業機械和拖拉機.前懸裝置.第1部分:動力輸出軸和三點懸掛裝置 |
(Agricultural machinery and tractors - Front-mounted equipment - Part 1: Power take-off and three-point linkage (ISO 8759-1:1998)) |
| DIN ISO 8764-1-2000 |
螺釘和螺母用裝配工具.十字頭螺釘旋具.第1部分:驅動頭 |
(Assembly tools for screws and nuts - Screwdrivers for cross-recessed head screws - Part 1: Driver points (ISO 8764-1:1999)) |
| DIN ISO 8764-2-2000 |
十字頭螺釘旋具.第2部分:一般要求、刀片長度和手操作旋具標志 |
(Screwdrivers for cross-recessed head screws - Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers (ISO 8764-2:1992)) |
| DIN ISO 8767-1995 |
汽車輪胎.滾動阻力測量法 |
(Passenger car tyres - Methods of measuring rolling resistance; identical with ISO 8767:1992) |
| DIN ISO 8775-1988 |
航空和航天.液壓系統用氧氣補充連接管.尺寸(英制) |
(Aerospace; gaseous oxygen replenishment connection for use in fluid systems (new type); dimensions (inch series); identical with ISO 8775:1988) |
| DIN ISO 8783-1999 |
高山滑雪.斜坡性能指南 |
(Alpine skis - Guidelines for conducting slope performance tests (ISO 8783:1999)) |
| DIN ISO 8787-1994 |
紙和紙板的檢驗.毛細上升的測定.克萊姆(KIEMM)法 |
(Testing of paper and board; determination of capillary rise; Klemm method; identical with ISO 8787:1986) |
| DIN ISO 8788-1988 |
航空和航天.緊固件.螺母的形狀和位置公差 |
(Aerospace; fasteners; tolerances of form and position for nuts; identical with ISO 8788, edition 1987) |
| DIN ISO 8791-4-1996 |
紙和紙板.粗糙度和平滑度的測定(漏氣法).第4部分:激浪印刷法 |
(Paper and board - Determination of roughness/smoothness (air leak methods) - Part 4: Print-surf method (ISO 8791-4:1992)) |
| DIN ISO 8805-1991 |
信息處理系統.計算機制圖.三維圖形核心系統(GKS-3D).功能描述 |
(Information processing systems; computer graphics; graphical kernel system for three dimensions (GKS-3D) functional description; identical with ISO 8805:1988) |
| DIN ISO 8821-1991 |
機械振動.平衡.用鍵聯結的軸和配件 |
(Mechanical vibration; balancing shaft and fitment key convention; identical with ISO 8821:1989) |
| DIN ISO 8826-1-1990 |
技術制圖.滾動軸承.第1部分:通用簡化畫法 |
(Technical drawings; rolling bearings; part 1: general simplified representation; identical with ISO 8826-1:1989) |
| DIN ISO 8826-2-1995 |
技術制圖.滾動軸承.第2部分:詳細簡化畫法 |
(Technical drawings - Rolling bearings - Part 2: Detailed simplified representation (ISO 8826-2:1994)) |
| DIN ISO 8847-1990 |
小型船舶.轉向裝置.鋼索和滑輪系統 |
(Small craft; steering gear; wire rope and pulley systems (ISO 8847: 1987); german version EN 28847:1989) |
| DIN ISO 885-2001 |
一般用途螺栓和螺釘.米制系列.端頭半徑 |
(General purpose bolts and screws - Metric series - Radii under the head (ISO 885:2000)) |
| DIN ISO 8854-1989 |
道路車輛.帶調節器的交流發電機.試驗方法和一般要求 |
(Road vehicles; alternators with regulators; test methods and general requirements; identical with ISO 8854:1988) |
| DIN ISO 8856-1997 |
道路車輛.起動電動機的電器性能.試驗方法和一般要求 |
(Road vehicles - Electrical performance of starter motors - Test methods and general requirements (ISO 8856:1995)) |
| DIN ISO 8862-1990 |
船舶機械控制室的空氣調節和通風.設計條件和計算基礎 |
(Air-conditioning and ventilation of machinery control-rooms on board ships; design conditions and basis of calculations; identical with ISO 8862:1987) |
| DIN ISO 8863-1990 |
船舶駕駛室窗戶.窗格玻璃熱風加熱 |
(Ship`s wheelhouse windows; heating by hot air of glass panes; identical with ISO 8863:1987) |
| DIN ISO 8864-1990 |
船舶駕駛室的空氣調節和通風.設計條件和計算基礎 |
(Air-conditioning and ventilation of wheelhouse on board ships; design conditions and basis of calculations; identical with ISO 8864:1987) |
| DIN ISO 8871-1990 |
含水非腸道藥配制器用彈性件 |
(Elastometric parts for aqueous parenteral preparations; identical with ISO 8871:1990) |
| DIN ISO 8871/A1-1996 |
含水非腸胃道藥劑配制用彈性體部件.修改件1 |
(Elastomeric parts for aqueous parenteral preparations; Amendment A1 (ISO 8871:1990 AMD 1:1995)) |
| DIN ISO 8872-1989 |
輸血、輸液及注射瓶的鋁蓋.一般要求和試驗方法 |
(Aluminium caps for transfusion, infusion and injection bottles; general requirements and test methods; identical with ISO 8872:1988) |
| DIN ISO 8909-1-2000 |
農機和拖車.飼料作物收割機.第1部分:詞匯 |
(Agricultural machinery and tractors - Forage harvesters - Part 1: Vocabulary (ISO 8909-1:1994)) |
| DIN ISO 8909-2-2000 |
農機和拖車.飼料作物收割機.第2部分:特性和性能規范 |
(Agricultural machinery and tractors - Forage harvesters - Part 2: Specification of characteristics and performance (ISO 8909-2:1994)) |
| DIN ISO 8909-3-2000 |
農機和拖車.飼料作物收割機.第3部分:試驗方法 |
(Agricultural machinery and tractors - Forage harvesters - Part 3: Test methods (ISO 8903-3:1994)) |
| DIN ISO 8930-1991 |
結構可靠性的一般原則.等義術語表 |
(General principles on reliability for structures; list of equivalent terms; identical with ISO 8930:1987) |
| DIN ISO 8935-1991 |
農業機械和拖拉機.外部設備控制器的安裝座和開口 |
(Agricultural machinery and tractors; mounting, aperture for external equipment controls; identical with ISO 8935:1990) |
| DIN ISO 8936-1992 |
大篷車的遮篷.安全要求 |
(Caravan awnings; safety requirements; identical with ISO 8936:1988) |
| DIN ISO 8936-2003 |
大篷車的遮篷.安全要求 |
(Caravan awnings - Safety requirements (ISO 8936:2003)) |
| DIN ISO 8937-2001 |
旅居車篷.功能要求和試驗方法 |
(Caravan-awnings - Functional requirements and test methods (ISO 8937:2000)) |
| DIN ISO 897-1993 |
攝影技術.膠卷.126、110和135膠卷.載像面的鑒別 |
(Photography; roll films; 126, 110 and 135 size films; identification of the image-bearing side; identical with ISO 897:1988) |
| DIN ISO 897-2005 |
攝影.126、110和135規格膠卷.成相面的識別 |
|
| DIN ISO 8975-1992 |
塑料.酚醛樹脂.pH值的測定 |
(Plastics; phenolic resins; determination of pH; identical with ISO 8975:1989) |
| DIN ISO 8976-1994 |
夾扭鉗和剪切鉗.多滑動結合手鉗.尺寸和試驗值 |
(Pliers and nippers - Multiple slip joint pliers - Dimensions and test values; identical with ISO 8976:1988) |
| DIN ISO 8977-2003 |
沖壓工具.沖模 |
(Tools for pressing - Matrixes (ISO 8977:2003)) |
| DIN ISO 8979-1995 |
電子設備用的夾扭鉗和剪切鉗和夾鉗.術語 |
(Pliers and nippers for electronics - Nomenclature; identical with ISO 8979:1988) |
| DIN ISO 8984-1-1994 |
柴油發動機.噴嘴架組件的檢驗.第1部分:手操作檢驗儀和調整儀 |
(Diesel engines - Testing of fuel injectors - Part 1: Hand-lever-operated testing and setting apparatus; identical with ISO 8984-1:1993) |
| DIN ISO 8984-2-1994 |
柴油發動機.噴嘴架組件的檢驗.第2部分:檢驗方法 |
(Diesel engines - Testing of fuel injectors - Part 2: Test methods; identical with ISO 8984-2:1993) |
| DIN ISO 8992-1992 |
緊固件.螺釘和螺母的一般要求 |
(Fasteners; general requirements for bolts, screws, studs and nuts; identical with ISO 8992:1986) |
| DIN ISO 8992-2005 |
緊固件.螺栓、螺釘、螺柱和螺母的一般要求 |
|
| DIN ISO 9000-4-1994 |
質量管理和質量保證標準.可靠性程序管理指南 |
(Quality management and quality assurance standards; guide to dependability programme management (identical with ISO 9000-4:1993 resp. IEC 60300-1:1993); German version EN 60300-1:1993) |
| DIN ISO 9004-2-1992 |
質量管理和質量保證體系的素.服務業導則 |
(Quality management and quality system elements; part 2: guidelines for services; identical with ISO 9004-2:1991) |
| DIN ISO 9010-1990 |
同步皮帶傳動裝置.汽車用皮帶 |
(Synchronous belt drives; automotive belts; identical with ISO 9010:1987) |
| DIN ISO 9011-1990 |
同步皮帶傳動裝置.汽車皮帶輪 |
(Synchronous belt drives; automotive pulleys; identical with ISO 9011:1987) |
| DIN ISO 9022-1-1999 |
光學和光學儀器.環境試驗方法.第1部分:定義.試驗的范圍 |
(Optics and optical instruments - Environmental test methods - Part 1: Definitions, extent of testing (ISO 9022-1:1994)) |
| DIN ISO 9022-10-2000 |
光學和光學儀器.環境試驗方法.第10部分:正弦振動和干熱法或低溫法的組合 |
(Optics and optical instruments - Environmental test methods - Part 10: Combined sinusoidal vibration and dry heat or cold (ISO 9022-10:1998)) |
| DIN ISO 9022-11-2000 |
光學和光學儀器.環境試驗方法.第11部分:霉菌生長 |
(Optics and optical instruments - Environmental test methods - Part 11: Mould growth (ISO 9022-11:1994)) |
| DIN ISO 9022-12-2000 |
光學和光學儀器.環境試驗方法.第12部分:污染 |
(Optics and optical instruments - Environmental test methods - Part 12: Contamination (ISO 9022-12:1994)) |
| DIN ISO 9022-13-2001 |
光學和光學儀器.環境試驗方法.第13部分:組合沖擊、碰撞或自由降落與干熱或干冷的試驗 |
(Optics and optical instruments - Environmental test methods - Part 13: Combined shock, bump or free fall and dry heat or cold (ISO 9022-13:1998)) |
| DIN ISO 9022-14-2001 |
光學和光學儀器.環境試驗方法.第14部分:露水、霜及冰 |
Optics and optical instruments - Environmental test methods - Part 14: Dew, hoarfrost, ice (ISO 9022-14:1994) |
| DIN ISO 9022-15-2001 |
光學和光學儀器.環境試驗方法.第15部分:組合的數字控制寬帶隨機振動和干熱及干冷的試驗 |
Optics and optical instruments - Environmental test methods - Part 15: Combined digitally controlled broad-band random vibration and dry heat or cold (ISO 9022-15:1998) |
| DIN ISO 9022-16-2001 |
光學和光學儀器.環境試驗方法.第16部分:組合跳動或穩定狀態的加速度與干熱或干冷的試驗 |
Optics and optical instruments - Environmental test methods - Part 16: Combined bounce or steady-state acceleration and dry heat or cold (ISO 9022-16:1998) |
| DIN ISO 9022-17-2001 |
光學和光學儀器.環境試驗方法.第17部分:組合污染與太陽輻射的試驗 |
Optics and optical instruments - Environmental test methods - Part 17: Combined contamination, solar radiation (ISO 9022-17:1994) |
| DIN ISO 9022-18-2001 |
光學和光學儀器.環境試驗方法.第18部分:組合濕熱及低內壓力的試驗 |
Optics and optical instruments - Environmental test methods - Part 18: Combined damp heat and low internal pressure (ISO 9022-18:1994) |
| DIN ISO 9022-19-2001 |
光學和光學儀器.環境試驗方法.第19部分:與正弦或隨機振動相結合的溫度循環的試驗 |
Optics and optical instruments - Environmental test methods - Part 19: Temperature cycles combined with sinusoidal or random vibration (ISO 9022-19:1994) |
| DIN ISO 9022-2-2003 |
光學和光學儀器.環境試驗方法.第2部分:冷、熱和濕度 |
Optics and optical instruments - Environmental test methods - Part 2: Cold, heat and humidity (ISO 9022-2:2002) |
| DIN ISO 9022-20-2001 |
光學和光學儀器.環境試驗方法.第20部分:含有硫化氫或二氧化硫的濕空氣的試驗 |
Optics and optical instruments - Environmental test methods - Part 20: Humid atmosphere containing sulfur dioxide or hydrogen sulfide (ISO 9022-20:1997) |
| DIN ISO 9022-21-2001 |
光學和光學儀器.環境試驗方法.第21部分:組合低壓和室溫或干熱的試驗 |
Optics and optical instruments - Environmental test methods - Part 21: Combined low pressure and ambient temperature or dry heat (ISO 9022-21:1998) |
| DIN ISO 9022-3-2000 |
光學和光學儀器.環境試驗方法.第3部分:機械應力 |
Optics and optical instruments - Environmental test methods - Part 3: Mechanical stress (ISO 9022-3:1998) |
| DIN ISO 9022-4-2003 |
光學和光學儀器.環境試驗方法.第4部分:鹽霧 |
Optics and optical instruments - Environmental test methods - Part 4: Salt mist (ISO 9022-4:2002) |
| DIN ISO 9022-5-1999 |
光學和光學儀器.環境試驗方法.第5部分:低溫,低壓 |
Optics and optical instruments - Environmental test methods - Part 5: Combined cold, low air pressure (ISO 9022-5:1994) |
| DIN ISO 9022-6-1999 |
光學和光學儀器.環境試驗方法.第6部分:塵埃 |
Optics and optical instruments - Environmental test methods - Part 6: Dust (ISO 9022-6:1994) |
| DIN ISO 9022-7-1999 |
光學和光學儀器.環境試驗方法.第7部分:滴水,雨 |
Optics and optical instruments - Environmental test methods - Part 7: Drip, rain (ISO 9022-7:1994) |
| DIN ISO 9022-8-2000 |
光學和光學儀器.環境試驗方法.第8部分:高壓、低壓及浸漬 |
Optics and optical instruments - Environmental test methods - Part 8: High pressure, low pressure, immersion (ISO 9022-8:1994) |
| DIN ISO 9022-9-2000 |
光學和光學儀器.環境試驗方法.第9部分:太陽輻射 |
Optics and optical instruments - Environmental test methods - Part 9: Solar radiation (ISO 9022-9:1994) |
| DIN ISO 9044-2001 |
工業用紡織金屬絲布.技術要求和試驗 |
Industrial woven wire cloth - Technical requirements and testing (ISO 9044:1999) |
| DIN ISO 9045-1998 |
工業用網篩和篩分.詞匯 |
Industrial screens and screening - Vocabulary (ISO 9045:1990) |
| DIN ISO 9069-1991 |
信息處理.SGML支持設備.SGML文獻交換格式(SDIF) |
Information processing; SGML support facilities; SGML document interchange format (SDIF); identical with ISO 9069:1988 |
| DIN ISO 9090-1990 |
氣焊以及類似的處理過程中設備的氣密特性 |
Gas tightness of equipment for gas welding and allied processes; identical with ISO 9090:1989 |
| DIN ISO 9099-1990 |
船舶干燥的儲備室的空氣調節和通風.設計條件和計算基礎 |
Air-conditioning and ventilation of dry provision rooms on board ships; design conditions and basis of calculations; identical with ISO 9099:1987 |
| DIN ISO 91-1-1984 |
石油測定表.第1部分:根據參比溫度15℃和60°F編制的表 |
(Petroleum measurement tables; part 1: tables based on reference temperatures of 15 C and 60 F) |
| DIN ISO 9102-1992 |
道路車輛.壓燃式發動機.24.25.26型擰入式噴嘴座 |
(Road vehicles; compression-ignition engines; screw-in injection nozzle holders, types 24, 25 and 26; Identical with ISO 9102:1990) |
| DIN ISO 9119-1991 |
越野滑雪板.連接固定區.要求和試驗方法 |
(Cross-country skis; binding mounting area; requirements and test methods; identical with ISO 9119:1990) |
| DIN ISO 9120-2005 |
石油及相關產品.汽輪機油和其他油的空氣釋放性能的測定.沖擊濾塵器法 |
|
| DIN ISO 9136-1996 |
粗晶粒磨料.容積密度的測定 |
(Abrasive macrograins - Determination of bulk density (ISO 9136:1989)) |
| DIN ISO 9136-2-2000 |
粗晶粒磨料.容積密度的測定.微小磨料 |
(Abrasive grains - Determination of bulk density - Part 2: Microgrits (ISO 9136-2:1999)) |
| DIN ISO 9137-1996 |
磨料粒度.毛細(管)作用測定 |
(Abrasive macrograins - Determination of capillarity (ISO 9137:1990)) |
| DIN ISO 9138-1996 |
磨料粒度.取樣和分割 |
(Abrasive grains - Sampling and splitting (ISO 9138:1993)) |
| DIN ISO 9141-1992 |
道路車輛.診斷系統.對數字信息交換的要求 |
(Road vehicle; diagnostic systems; requirements for interchange of digital information; identical with ISO 9141:1989) |
| DIN ISO 9152-2005 |
航空航天.強度等級為1100 MPa的鈦合金制MJ螺紋螺栓.采購規范 |
|
| DIN ISO 9158-1989 |
道路車輛.無鉛汽油用管嘴 |
(Road vehicles; nozzle spouts for unleaded gasoline; identical with ISO 9158:1988) |
| DIN ISO 9159-1989 |
道路車輛.含鉛汽油和柴油用管嘴 |
(Road vehicles; nozzle spouts for leaded gasoline and diesel fuel; identical with ISO 9159:1988) |
| DIN ISO 9169-1996 |
空氣質量.操作特性的測量方法 |
(Air quality - Determination of performance characteristics of measurement methods (ISO 9169:1994)) |
| DIN ISO 9175-1-1990 |
用繪圖墨水的手持式描圖紙專用筆的管狀筆尖.第1部分:概念.尺寸.名稱與符號及標志 |
(Tubular tips for hand-held technical pen using india ink; definitions, dimensions, designation and marking; identical with ISO 9175-1:1988) |
| DIN ISO 9175-2-1990 |
用印度墨水的手持式描圖紙專用筆的管狀筆尖.第2部分:結構.要求和檢驗 |
(Tubular tips for hand-held technical pen using india ink; performance, test parameters and test conditions; identical with ISO 9175-2:1988) |
| DIN ISO 9176-1993 |
管狀制圖筆.圓規轉接器 |
(Tubular technical pens; adaptor for compasses; identical with ISO 9176:1988) |
| DIN ISO 9177-1-1990 |
制圖自動鉛筆.第1部分:分類.尺寸和性能的要求和檢驗 |
(Mechanical pencils; classification, dimensions, performance requirements and testing; identical with ISO 9177-1:1989) |
| DIN ISO 9177-2-1990 |
制圖自動鉛筆.第2部分:石墨.分類和尺寸 |
(Mechanical pencils; black leads, classification and dimensions; identical with ISO 9177-2:1989) |
| DIN ISO 9177-3-1995 |
制圖自動鉛筆.第3部分:石墨.HB筆芯的抗彎強度 |
(Mechanical pencils - Part 3: Black leads; bending strengths of HB leads; identical with ISO 9177-3:1994) |
| DIN ISO 9178-1-1992 |
書寫和符號的模板.第1部分:一般原則和鑒別標記 |
(Templates for lettering and symbols; general principles and identification markings; identical with ISO 9178-1:1988) |
| DIN ISO 9178-2-1992 |
書寫和符號的模板.第2部分:木皮鉛筆和細鉛筆的槽寬 |
Templates for lettering and symbols; slot widths for wood-cased pencils, clutch pencils and fine-lead pencils; identical with ISO 9178-2:1988 |
| DIN ISO 9178-3-1992 |
文字和符號的模板.第3部分:按照ISO 9157-1管形筆尖的技術鋼筆用的槽寬 |
Templates for lettering symbols; slot widths for technical pens with tubular tips in accordance with ISO 9175-1; identical with ISO 9178-3:1989 |
| DIN ISO 9180-1989 |
木殼鉛筆的黑色鉛芯.分類及直徑 |
Black leads for wood-cased pencils; classification and diameters; identical with ISO 9180:1988 |
| DIN ISO 9183-1-1992 |
沖壓工具.第1部分:沖壓工具用抗磨板.型號A |
Tools for pressing; wear plates for press dies; typ A; identical with ISO 9183-1:1990 |
| DIN ISO 9187-1-2000 |
醫用注射設備.第1部分:注射針用安瓿瓶 |
Injection equipment for medical use - Part 1: Ampoules for injectables (ISO 9187-1:2000) |
| DIN ISO 9187-2-1994 |
醫用注射器.單點切割安瓿 |
Injection equipment for medical use; one point cut ampoules (OPC); identical with ISO 9187-2:1993 |
| DIN ISO 9193-1992 |
園林和農業管理.草地和園林使用的拖拉機.動力輸軸 |
Garden and landscope maintenance; lawn and garden tractors; power take-off; identical with ISO 9193:1990 |
| DIN ISO 92-1980 |
紡織機械和輔助裝置.紡紗機.左右側的定義 |
(Textile machinery and accessories; spinning machinery, definition of side (left or right)) |
| DIN ISO 9203-1-1991 |
造船數據處理.船體結構零件的布局.第1部分:零件定位 |
(Shipbuilding; information processing; topology of ship hull structure elements; location of elements; identical with ISO 9203-1:1989) |
| DIN ISO 9203-2-1991 |
造船.船體結構零件的布局.第2部分:零件的描述 |
(Shipbuilding; information processing; topology of ship hull structure elements; description of elements; identical with ISO 9203-2:1989) |
| DIN ISO 9203-3-1991 |
造船數據處理.船體結構零件的布局.第3部分:零件間的關系 |
(Shipbuilding; information processing; topology of ship hull structure elements; relations of elements; identical with ISO 9203-3:1989) |
| DIN ISO 9211-1-2001 |
光學和光學儀器.光覆層.第1部分:定義(ISO9211-1:1994) |
(Optics and optical instruments - Optical coatings - Part 1: Definitions (ISO 9211-1:1994)) |
| DIN ISO 9211-2-2001 |
光學和光學儀器.光學涂層.第2部分:光學特性 |
(Optics and optical instruments - Optical coatings - Part 2: Optical properties (ISO 9211-2:1994)) |
| DIN ISO 9211-3-2001 |
光學和光學儀器.光學涂層.第3部分:環境穩定性 |
(Optics and optical instruments - Optical coatings - Part 3: Environmental durability (ISO 9211-3:1994)) |
| DIN ISO 9222-1-1990 |
技術制圖.動負荷用密封.總體.簡化畫法 |
(Technical drawings; seals for dynamic application; part 1: general simplified representation; identical with ISO 9222-1:1989) |
| DIN ISO 9222-2-1991 |
技術制圖.動負荷用密封.細節.簡化畫法 |
(Technical drawings; seals for dynamic application; part 2: detailed simplified representation; identical with ISO 9222-2:1989) |
| DIN ISO 9242-1994 |
夾扭鉗和剪切鉗.建筑工人的夾鉗.尺寸和試驗值 |
(Pliers and nippers - Construction worker`s pincers - Dimensions and test values; identical with ISO 9242:1988) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com