標準號 |
中文名稱 |
英文名稱 |
| DIN 6349-3-1978 |
帶齒環螺紋銷C型三爪鉆夾頭 |
(Key-Type Three-Jaw Drill Chucks, Form C, with Fastening by Threaded Pin) |
| DIN 6349-4-1988 |
帶齒環三爪鉆夾頭.嚙合和扳手 |
(Key type three-jaw drill chucks; key and tooth system) |
| DIN 6349-5-1978 |
鍵式的三爪鉆夾.交貨技術條件 |
(Key-Type Three-Jaw Drill Chucks; Technical Conditions of Delivery) |
| DIN 635-1 Bb.1-1994 |
滾動軸承.單列調心球軸承.特性標志和簡圖 |
(Rolling bearings - Self-aligning roller bearings, single row - Geometric and characteristic) |
| DIN 635-1-1987 |
滾動軸承.調心球軸承.單列 |
(Rolling bearings; single-row self-aligning roller bearings) |
| DIN 635-2-1984 |
滾動軸承.調心球軸承.雙列 |
(Rolling bearings; spherical roller bearings, double row) |
| DIN 6350-1-1968 |
手動車床卡盤.帶圓柱安裝槽自定心卡盤 |
(Lathe Chucks, Hand-operated; Jaws not Individually Adjustable, with Cylindrical Mounting Recess) |
| DIN 6350-2-1969 |
手動車床卡盤.帶1:4錐度的自定心卡盤 |
(Lathe Chucks, Hand-operated; Jaws not Individually Adjustable, Mounting recess with 1 : 4 Taper) |
| DIN 6351-1-1968 |
手動車床卡盤.帶圓柱形安裝槽的非自定心卡盤 |
(Lathe Chucks, Hand-operated; Jaws also Individually Adjustable with Cylindrical Mounting Recess) |
| DIN 6351-2-1969 |
手動車床卡盤.帶1:4安裝槽的非自定心卡盤 |
(Lathe Chucks, Hand-operated; Jaws also Individually Adjustable, Mounting Recess with 1 : 4 Taper) |
| DIN 6352-1-1968 |
帶1:4定心錐的卡盤座板.安裝法蘭 |
(Chuck backplates with 1 : 4 Locating Taper; Basic Flanges) |
| DIN 6353-1977 |
無通孔動力操作車床卡盤 |
(Lathe Chucks, Power-operated, without Trough-hole) |
| DIN 6354-1980 |
全錐形銑刀芯軸 |
(Milling machine arbors with steep taper, complete) |
| DIN 6355-1980 |
錐形銑刀芯軸 |
(Clamping Devices; Milling Machine Arbors with Taper) |
| DIN 6356-1972 |
帶內定心孔的銑刀盤用銑刀桿 |
(Centering arbors for milling cutters) |
| DIN 6357-1988 |
內徑定心銑頭和面銑刀用的7:24錐柄的銑刀桿 |
(Holding arbors with taper shank 7/24 for milling cutters and face milling cutters with internal alignment) |
| DIN 6358-1988 |
側傳動的圓柱柄的7:24錐度轉接套筒 |
(Milling machine arbors with taper shank 7/24 for milling cutter with longitudinal or transverse drive) |
| DIN 6359-1-1996 |
帶有側傳動面和傾斜夾緊面的直柄用帶7/24錐柄的減速套筒.第1部分:符合DIN2080-1要求的帶7/24錐柄的A型套筒 |
(Reduction sleeves with 7/24 taper shank for parallel shanks with lateral driving surface and inclined clamping surface - Part 1: Type A with 7/24 taper shank in accordance with DIN 2080-1) |
| DIN 6359-2-1996 |
帶有側傳動面和傾斜夾緊面的直柄用帶7/24錐柄的縮徑套管.第2部分:符合DIN69871-1要求的帶7/24錐柄的B型套管 |
(Reduction sleeves with 7/24 taper shank for parallel shanks with lateral driving surface and inclined clamping surface - Part 2: Type B with 7/24 taper shank in accordance with DIN 69871-1) |
| DIN 636-1-1993 |
線性滾動軸承.動態和靜態額定負荷.線性環形運動的球軸承 |
(Linear rolling bearings; dynamic and static load ratings; linear motion recirculating ball bearings) |
| DIN 636-2-1993 |
線性滾動軸承.動承載量和靜承載量.型軌球?qū)蜉S承 |
(Linear rolling bearings; dynamic and static load ratings; profile rail guide recirculating ball bearings) |
| DIN 636-3-1994 |
線型滾動軸承.動態和靜態承載量.無滾動件循環的線型槽 |
(Linear rolling bearings; dynamic and static load ratings; linear guides without rolling element recirculation) |
| DIN 6360-1983 |
帶縱槽的銑刀用大錐套的套式銑刀刀桿 |
(Milling machine arbors with 7/24 taper for milling cutters with longitudinal and transverse drive) |
| DIN 6364-2000 |
帶緊定螺紋的莫氏錐柄用7/24外錐柄異徑連接套 |
(Reduction sleeves with external taper shank 7/24 for morse taper shank with tightening thread) |
| DIN 63650-1976 |
粗梳毛紡工藝用環錠紡紗機.概念.結構原理 |
(Ring spinning frame for woollen spinning; terms and definitions; principles of construction) |
| DIN 6366-1-1982 |
空心端銑刀橫鍵傳動爪環 |
(Clutch drive rings for shell end mill arbors) |
| DIN 6366-2-1964 |
滾刀心軸用爪驅動環 |
(Clutch Drive Rings for Hob Arbors) |
| DIN 6367-2003 |
套式銑刀刀桿用銑刀緊固螺絲 |
(Cutter retaining screws for milling machine arbors) |
| DIN 6368-1999 |
銑刀拉緊螺絲的專用扳手 |
(Wrenches for cutter retaining screws) |
| DIN 6369-1974 |
7:24錐度套筒緊固螺栓.夾具固定用螺紋段 |
(Draw-in Rods for Taper Reception; Threaded End for Tool Retention) |
| DIN 6370-1957 |
夾具.機床用虎鉗.夾緊范圍.連接尺寸.允許偏差.夾緊虎鉗 |
(Clamping Devices; Machine Vices, Capacities, Mating Dimensions, Permissible Variations, Jaws) |
| DIN 63700-2000 |
紡織機械.棉紡工藝用環錠紡紗機.術語和定義.結構原理 |
(Textile machinery - Ring spinning machine for cotton spinning - Terms and definitions; principles of construction) |
| DIN 6371-1999 |
夾具用C型轉動墊圈 |
(Captive C-washer) |
| DIN 6372-2002 |
夾緊和固定裝置用C-型墊圈 |
(C-washer for jigs and fixtures) |
| DIN 6374-1980 |
磨削心軸.裝夾工件心軸 |
(Grinding machine mandrels) |
| DIN 6376-1972 |
夾具的橫撐 |
(Swing latch) |
| DIN 6377-1973 |
夾緊槽 |
(Clamping slots) |
| DIN 6378-1974 |
鉤螺釘 |
(Clip Bolts) |
| DIN 6379-1991 |
T型槽螺母用雙頭螺釘 |
(Studs for T-nuts) |
| DIN 6379-2003 |
與T型槽螺母一起使用的螺柱 |
(Studs for use with tee nuts) |
| DIN 6381-1962 |
錐柄的定心芯軸 |
(Aligning Arbors with Taper Shank) |
| DIN 6382-1964 |
工具接長套筒 |
(Tool Extension Sockets) |
| DIN 6384-1980 |
7:24錐度的鏜頭 |
(Boring heads with taper 7/24) |
| DIN 6385-1980 |
7:24錐度的短鉆桿 |
(Short boring bars with taper 7/24) |
| DIN 6386-1-1977 |
車床卡盤.手動卡盤的交貨技術條件 |
(Lathe chucks; technical conditions of delivery for hand operated lathe chucks) |
| DIN 6386-2-1983 |
不帶通孔的車床卡盤.機動卡盤的交貨技術條件 |
(Lathe chucks, without through-hole; technical conditions of delivery for power operated lathe chucks) |
| DIN 6388-1993 |
工具夾緊用1:10錐度的彈簧夾頭.彈簧夾頭.彈簧夾頭座.夾緊螺母 |
(Collets for tool holder with taper ratio 1 : 10; collets, holder, nuts) |
| DIN 6391-1990 |
夾緊刀具用.錐度為1:10的彈簧夾頭的帶錐柄的卡盤 |
(Chucks with taper shank 7/24 for collets for tool holder with taper 1:10) |
| DIN 6393-1994 |
絲錐用快速更換插件.剛性 |
(Quick-change adapters for taps - Rigid) |
| DIN 63950-1976 |
環錠捻線機.概念 |
(Ring doubling and twisting frame; terms and definitions) |
| DIN 6397-1988 |
抹瓷磚用的鏝刀 |
(Floortiling trowel) |
| DIN 6403-1976 |
帶盒的鋼尺 |
(Measuring Tapes of Steel with Winder Frames or Winder Cases) |
| DIN 64046-1995 |
帶套管的錠桿.帶套筒聯軸節的錠桿.錐形筒管1:38(按DIN368) |
(Ring spindles with plugs with tube coupling for tubes with taper 1:38 according to DIN ISO 368) |
| DIN 64047-1995 |
帶套管的錠桿.帶套筒聯軸節的錠桿.錐形筒管1:64(按DIN368) |
(Ring spindles with plugs with tube coupling for tubes with taper 1:64 according to DIN ISO 368) |
| DIN 6406-1966 |
吊環 |
(Loops) |
| DIN 64074-2000 |
紡織機械.棉紡工藝用混合開包機.術語和定義.結構原理 |
(Textile machinery - Mixing bale opener for cotton spinning - Terms and definitions; principles of construction) |
| DIN 64075-2000 |
紡織機械.棉紡工藝用棉箱給棉機.術語和定義.結構原理 |
(Textile machinery - Hopper feeder for cotton spinning - Terms and definitions; principles of construction) |
| DIN 64076-2000 |
紡織機械.棉紡工藝用集棉器.術語和定義.結構原理 |
(Textile machinery - Condenser for cotton spinning - Terms and definitions; principles of construction) |
| DIN 64078-1974 |
棉紡廠用的臥式開棉機.概念.結構原理 |
(Horizontal opener for cotton spinning; terms and definitions, principles of construction) |
| DIN 64080-1974 |
棉紡廠用的梳棉機.概念.結構原理 |
(Card for cotton spinning; terms and definitions, principles of construction) |
| DIN 64082-1976 |
棉紡工藝用的并條機.概念.結構原理 |
(Drafting frame for cotton spinning; terms and definitions, principles of construction) |
| DIN 64082-2004 |
棉紡用并條機.術語、定義和組件 |
|
| DIN 64083-1976 |
棉紡工藝用的翼錠粗紡機.概念.結構原理 |
(Flyer frame for cotton spinning; terms and definitions, principles of construction) |
| DIN 64090-1981 |
精梳紗和半精梳紗紡織工藝用的并條機.概念 |
(Draw frame for worsted and semiworsted systems; terms and definitions) |
| DIN 64108-1963 |
紡織機械.針布帶.概念.針跡種類.針跡寬度 |
(Textile machinery; card fillets, terms, methods of setting the wire, set of wire widths) |
| DIN 64110-1973 |
開松機角釘板用的鋼銷釘 |
(Steel pins for wooden lags for teasers) |
| DIN 64115-1979 |
細紗機用的道夫斬刀 |
(Doffer comb blades for spinning machines) |
| DIN 64118-1981 |
羅拉式梳毛機.概念 |
(Roller cards; terms and definitions) |
| DIN 64124-1-1998 |
紡織機械和附件.全鋼針布的異型鋼絲.第1部分:帶針腳無交鏈.主要尺寸 |
(Textile machinery and accessories - Section wires for metallic card clothing - Part 1: Foot without interchaining; main dimensions) |
| DIN 64124-3-1998 |
紡織機械和附件.全鋼針布的異型鋼絲.第3部分:帶交鏈針腳.主要尺寸 |
(Textile machinery and accessories - Section wires for metallic card clothing - Part 3: With interchaining foot; main dimensions) |
| DIN 64126-2000 |
紡織機械.矩形條筒.主尺寸和公差 |
(Textile machinery - Sliver cans, rectangular - Main dimensions and tolerances) |
| DIN 64127-1966 |
粗紡梳毛機上的毛網分條裝置.概念.滾筒隔距.分條皮帶 |
(Dividing rollers for dividers by woollen cards - Terms, roller gauges, tapes) |
| DIN 64163-1974 |
紡織纖維初加工用的開線頭機.概念.結構原理 |
(Hard waste breaker; for fibre-preparing; terms and definitions, principles of construction) |
| DIN 64164-1977 |
紡織纖維初加工用的開松機.概念.結構原理 |
(Teaser for fibre-preparing; terms and definitions, principles of construction) |
| DIN 64165-1977 |
紡織纖維初加工用的和毛機.概念.結構原理 |
(Carding willow for fibre-preparing; terms and definitions, principles of construction) |
| DIN 64166-1974 |
紡織纖維初加工用的開松梳理機.概念.結構原理 |
(Garnetting machine for fibre-preparing; terms and definitions, principles of construction) |
| DIN 6434-1984 |
鉚釘用具 |
(Rivet sets) |
| DIN 6435-1984 |
鉚釘頭用具 |
(Rivet headers) |
| DIN 6436-1990 |
尖鋤 |
(Pickaxes) |
| DIN 6437-1-1990 |
鋤把.尺寸.要求.檢驗 |
(Pickaxe handles; dimensions, requirements, testing) |
| DIN 6437-2-1990 |
鋤把.量規 |
(Pickaxe handles; gauges) |
| DIN 6438-1971 |
手動剪板機 |
(Tinners` snips) |
| DIN 6439-1988 |
修平鏝刀 |
(Smoothing trowels) |
| DIN 644-1997 |
線性滾動軸承.線性軸承用導軌.尺寸和公差 |
(Linear rolling bearings - Shaft support rails for linear bearings - Dimensions and tolerances) |
| DIN 6440-1988 |
砌墻用的鏝刀 |
(Masons trowels) |
| DIN 6441-1988 |
抹漿用鏝刀 |
(Plastering trowles) |
| DIN 64410-6-1970 |
縫紉機用的圓柱形筒管.筒管.塞規 |
(Cylindrical tubes for sewing yarns; tubes, gauges) |
| DIN 6442-1966 |
木工鉆.長槽鉆 |
(Wood bits; straight flute bits (straight flute drills)) |
| DIN 64420-6-1976 |
錐形筒管.半錐角9°15′.筒管.塞規 |
(Cones, half angle of the cone 9 15; cones, gauges) |
| DIN 6444-1966 |
木工鉆.麻花鉆 |
(Wood bits; auger bits) |
| DIN 6445-1966 |
木工鉆.環形柄鉆頭 |
(Wood bits; gimlets with ring handles) |
| DIN 6446-1966 |
木工鉆.梅花鉆 |
(Wood bits; rose bits (countersinks)) |
| DIN 6447-1976 |
木工鉆.中心鉆 |
(Wood bits; center bits (expansive bits)) |
| DIN 6449-1966 |
木工鉆.桿狀麻花鉆 |
(Wood bits; hand auger bits) |
| DIN 645-1-1999 |
滾動軸承.型軌滾道.第1部分:系列1至3的尺寸 |
(Rolling bearings - Profile rail rolling guides - Part 1: Dimensions for series 1 to 3) |
| DIN 645-2-1999 |
滾動軸承.型軌滾道.第1部分:系列4的尺寸 |
(Rolling bearings - Profile rail rolling guides - Part 2: Dimensions for serie 4) |
| DIN 6450-1984 |
小直徑凸模 |
(Pin punches) |
| DIN 6451-1985 |
扁尖鑿 |
(Cape chisels) |
| DIN 6453-1984 |
平鑿 |
(Flat chisels) |
| DIN 6455-1984 |
槽鑿 |
(Grooving chisels) |
| DIN 6458-1984 |
沖孔機 |
(Drift punches) |
| DIN 64580-1-1977 |
電動經紗自停裝置的停經片導軌 |
(Bars for drop wires for electrical warp stop motions) |
| DIN 64580-2-1977 |
機械經紗自停裝置的停經片導軌 |
(Bars for drop wires for mechanical warp stop motions) |
| DIN 64595-1997 |
紡織機械和附件.織筘.噴嘴織機用織筘.尺寸 |
(Textile machinery and accessories - Reeds - Reeds for air-jet weaving machines; dimensions) |
| DIN 64597-1977 |
粘合織筘用盒式型材.連接尺寸 |
(Case profiles for glued reeds; inter-related dimensions) |
| DIN 64605-1972 |
紗線制動重錘 |
(Yarn brake weights) |
| DIN 6461-1966 |
木工鉆.短型長槽鉆 |
(Wood bits; short type straight flute bits (straight flute drills)) |
| DIN 64610-1974 |
自動織機用的緯管 |
(Weft pirns for automatic looms) |
| DIN 64638-1971 |
圓柱形拉伸加捻筒管 |
(Cylindrical tubes for draw-twisters) |
| DIN 64639-1998 |
紡織機械和附件.噴氣嘴織機用綜框.連接尺寸 |
(Textile machinery and accessories - Heald frames for air-jet weaving machines - Connecting dimensions) |
| DIN 6464-1966 |
木工鉆.手用螺旋尖鉆 |
(Wood bits; gimlet bits) |
| DIN 6465-1976 |
去鍋垢用錘 |
(Scaling hammers) |
| DIN 64668-1969 |
織布廠的自動織機梭子 |
(Shuttles for automatic looms for weaving) |
| DIN 64685-1969 |
織梭.名稱 |
(Terms for shuttles) |
| DIN 6473-1973 |
金屬加工用手鋸.弓形鋸 |
(Hand saws for metal; Hachsaw frames) |
| DIN 6475-2000 |
雙面大錘 |
(Double face sledge hammers) |
| DIN 6480-1990 |
木箱鑿.起釘器 |
(Box chisels; nail pullers) |
| DIN 64805-1984 |
復動式多臂機.紋板的鑿孔模板 |
(Double lift dobbies; cards, matrices) |
| DIN 64845-1969 |
法式細針距的未沖孔提花機紋板 |
(Unpunched Jacquard cards for French fine pitch) |
| DIN 64846-1969 |
法式細針距提花機紋板--清棉機.機床尺寸.紋板鑿孔模板 |
(Stamping machines for Jacquard cards for French fine pitch; size of machines, matrices) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com