標準號 |
中文名稱 |
英文名稱 |
| DIN CWA 14050-10-2001 |
金融服務輔助設備接口規范.3.0版.第10部分:傳感器和指示器設備類接口 |
(Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 10: Sensors and indicators unit device class interface (English Version CWA 14050-10:2000)) |
| DIN CWA 14050-11-2001 |
金融服務輔助設備接口規范.3.0版.第11部分:自動售貨機相關模式類接口 |
(Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 11: Vendor dependent mode class interface (English Version CWA 14050-11:2000)) |
| DIN CWA 14050-12-2001 |
金融服務輔助設備接口規范.3.0版.第12部分:攝影機設備類接口 |
(Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 12: Camera device class interface (English Version CWA 14050-12:2000)) |
| DIN CWA 14050-13-2001 |
金融服務輔助設備接口規范.3.0版.第13部分:警報設備類接口 |
(Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 13: Alarm device class interface (English Version CWA 14050-13:2000)) |
| DIN CWA 14050-14-2001 |
金融服務輔助設備接口規范.3.0版.第14部分:卡壓紋設備類接口 |
(Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 14: Card embossing unit class interface (English Version CWA 14050-14:2000)) |
| DIN CWA 14050-15-2001 |
金融服務輔助設備接口規范.3.0版.第15部分:兌現設備類接口 |
(Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 15: Cash in module device class interface (English Version CWA 14050-15:2000)) |
| DIN CWA 14050-16-2001 |
金融服務輔助設備接口規范.3.0版.第16部分:應用程序接口.服務接口.從2.0版升級到3.0版.程序員參考 |
(Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 16: Application Programming Interface (API); Service Provider Interface (SPI); Migration from Version 2.0 (see CWA 13449) to Version 3.0 (this CWA); Programmer`s referen |
| DIN CWA 14050-17-2001 |
金融服務輔助設備接口規范.3.0版.第17部分:打印設備類接口.從2.0版升級到3.0版.程序員參考 |
(Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 17: Printer device class interface; Migration from Version 2.0 (see CWA 13449) to Version 3.0 (this CWA); Programmer`s reference (English Version CWA 14050-17:2000)) |
| DIN CWA 14050-18-2001 |
金融服務輔助設備接口規范.3.0版.第18部分:識別卡設備類接口.從2.0版升級到3.0版.程序員參考 |
(Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 18: Identification card device class interface; Migration from Version 2.0 (see CWA 13449) to Version 3.0 (this CWA); Programmer`s reference (English Version CWA 14050-1 |
| DIN CWA 14050-19-2001 |
金融服務輔助設備接口規范.3.0版.第19部分:自動提款機設備類接口.從2.0版升級到3.0版.程序員參考 |
(Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 19: Cash dispenser device class interface; Migration from Version 2.0 (see CWA 13449) to Version 3.0 (this CWA); Programmer`s reference (English Version 14050-19:2000)) |
| DIN CWA 14050-2-2001 |
金融服務接口規范的擴展.3.0版.第2部分:服務等級定義 |
(Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 2: Service classes definition (Englisch version CWA 14050-2:2000)) |
| DIN CWA 14050-20-2001 |
金融服務輔助設備接口規范.3.0版.第20部分:針式小鍵盤設備類接口.從2.0版升級到3.0版.程序員參考 |
(Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 20: Pin keypad device class interface; Migration from Version 2.0 (see CWA 13449) to Version 3.0 (this CWA); Programmer`s reference (English Version CWA 14050-20:2000)) |
| DIN CWA 14050-21-2001 |
金融服務輔助設備接口規范.3.0版.第21部分:存放設備類接口.從2.0版升級到3.0版.程序員參考 |
(Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 21: Depository device class interface; Migration from Version 2.0 (see CWA 13449) to Version 3.0 (this CWA); Programmer`s reference (English Version CWA 14050-21:2000)) |
| DIN CWA 14050-22-2001 |
金融服務輔助設備接口規范.3.0版.第22部分:文本終端設備類接口.從2.0版升級到3.0版.程序員參考 |
(Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 22: Text terminal unit device class interface; Migration from Version 2.0 (see CWA 13449) to Version 3.0 (this CWA); Programmer`s reference (English Version CWA 14050-22 |
| DIN CWA 14050-23-2002 |
金融服務輔助設備接口規范.3.01版.第23部分:傳感器和指示器設備類接口.從2.0版升級到3.01版.程序員參考 |
(Extensions for Financial Services (XFS) interface specification - Release 3.01 - Part 23: Sensors and indicators unit device class interface; Migration from Version 2.0 (see CWA 13449) to Version 3.01 (this CWA); Programmer`s reference; English version C |
| DIN CWA 14050-24-2001 |
金融服務輔助設備接口規范.3.0版.第24部分:攝像機設備類接口.從2.0版升級到3.0版.程序員參考 |
(Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 24: Camera device class interface; Migration from Version 2.0 (see CWA 13449) to Version 3.0 (this CWA); Programmer`s reference (English Version CWA 14050-24:2000)) |
| DIN CWA 14050-25-2001 |
金融服務輔助設備接口規范.3.0版.第25部分:識別卡設備類接口.PC/SC集成指南 |
(Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 25: Identification card device class interface; PC/SC integration guidelines (English Version CWA 14050-25:2000)) |
| DIN CWA 14050-3-2001 |
金融服務接口規范的擴展.3.0版.第3部分:打印裝置接口 |
(Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 3: Printers Device Class interface (English version CWA 14050-3:2000)) |
| DIN CWA 14050-4-2001 |
金融服務輔助設備接口規范.3.0版.第4部分:識別卡設備類接口 |
(Extensions for financial services (XFS) interface specification - Release 3.0 - Part 4: Identification card unit device class interface; (Englisch Version CWA 14050-4:2000)) |
| DIN CWA 14050-5-2001 |
金融服務輔助設備接口規范.3.0版.第5部分:自動取款機設備類接口 |
(Extensions for financial services (XFS) interface specification - Release 3.0 - Part 5: Cash dispenser device class interface; (English Version CWA 14050-5:2000)) |
| DIN CWA 14050-6-2001 |
金融服務輔助設備接口規范.3.0版.第6部分:針式小鍵盤設備類接口 |
(Extensions for financial services (XFS) interface specification - Release 3.0 - Part 6: PIN keypad device class interface (English Version CWA 14050-6:2000)) |
| DIN CWA 14050-7-2001 |
金融服務輔助設備接口規范.3.0版.第7部分:校驗讀取器/掃描設備類接口 |
(Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 7: Check reader/scanner device class interface (English Version CWA 14050-7:2000)) |
| DIN CWA 14050-8-2001 |
金融服務輔助設備接口規范.3.0版.第8部分:存儲設備類接口 |
(Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 8: Depository device class interface (English Version CWA 14050-8:2000)) |
| DIN CWA 14050-9-2001 |
金融服務輔助設備接口規范.3.0版.第9部分:文本終端設備類接口 |
(Extensions for Financial Services (XFS) interface specification - Release 3.0 - Part 9: Text terminal unit device class interface (English Version CWA 14050-9)) |
| DIN CWA 14051-1-2001 |
信息技術.歐洲一般場所.第1部分:一般規范 |
(Information technology - European generic locales - Part 1: General specifications (English version CWA 14051-1:2000)) |
| DIN CWA 14051-2-2001 |
信息技術.歐洲一般場所.第2部分:敘述文化.POSIX場所和指令表 |
(Information technology - European generic locales - Part 2: Narrative cultural specifications, POSIX locales, and repertoiremap (English version CWA 14051-2:2001)) |
| DIN CWA 14087-2001 |
歐洲呼叫中心培訓和資格認定用標準.用戶聯系表示的語言能力 |
(European Call Centre Standards for training and qualification - Customer contact representative competences (English Version CWA 14087:2000)) |
| DIN CWA 14088-1-2001 |
醫院征購用歐洲電子商業(ECHOP).第1部分:在歐洲由HPDs執行的共同操作 |
(European Electronic Commerce for Hospital Procurement (ECHOP) - Part 1: Common operations carried out by HPDs (Hospital Procurement Department) in Europe (English version CWA 14088-1:2001)) |
| DIN CWA 14088-2-2001 |
醫院征購用歐洲電子商業(ECHOP).第2部分:技術規范V.0.1和標準功能列表 |
(European Electronic Commerce for Hospital Procurement (ECHOP) - Part 2: List of standardized functional and technical specifications V.0.1 (English version CWA 14088-2:2001)) |
| DIN CWA 14088-3-2001 |
醫院征購用歐洲電子商業(ECHOP).第3部分:在扇區V.0.1的水平上安全和互操真實性協議 |
(European Electronic Commerce for Hospital Procurement (ECHOP) - Part 3: Protocols of security and the interoperable authentication at the level of the sector V.0.1 (English version CWA 14088-3:2001)) |
| DIN CWA 14088-4-2001 |
醫院征購用歐洲電子商業(ECHOP).第4部分:(由于產品的標準化的名稱出現)將來需要標準化的操作 |
(European Electronic Commerce for Hospital Procurement (ECHOP) - Part 4: Future operations that should need to be standardized (due to the appearance of a standardized denomination of products) (English version CWA 14088-4:2001)) |
| DIN CWA 14088-5-2001 |
醫院征購用歐洲電子商業(ECHOP).第5部分:仍然需要標準化的技術 |
(European Electronic Commerce for Hospital Procurement (ECHOP) - Part 5: Technology that still needs to be standardized (English version CWA 14088-5:2001)) |
| DIN CWA 14088-6-2001 |
醫院征購用歐洲電子商業(ECHOP).第6部分:促進電子商業標準化的法律出臺 |
(European Electronic Commerce for Hospital Procurement (ECHOP) - Part 6: Legal issues to facilitate the standardization of electronic commerce (English version CWA 14088-6:2001)) |
| DIN CWA 14094-2001 |
歐洲文化特定的ICT要求 |
(European culturally specific ICT requirements (English version CWA 14094:2001)) |
| DIN CWA 14113-1-2001 |
衛生商品和加熱系統工業的電子商業.第1部分:產品術語和分級 |
(Electronic commerce for the sanitaryware and heating systems industry - Part 1: Product terminology and classification (English version CWA 14113-1:2001)) |
| DIN CWA 14113-2-2001 |
衛生商品和加熱系統工業的電子商業.第2部分:數字格式 |
(Electronic commerce for the sanitaryware and heating systems industry - Part 2: Digital formats (English version CWA 14113-2:2001)) |
| DIN CWA 14113-3-2001 |
衛生商品和加熱系統工業的電子商業.第3部分:權利和規則 |
(Electronic commerce for the sanitaryware and heating systems industry - Part 3: Rights and rules (English version CWA 14113-3:2001)) |
| DIN CWA 14113-4-2001 |
衛生商品和加熱系統工業的電子商業.第4部分:工業共同數據銀行 |
(Electronic commerce for the sanitaryware and heating systems industry - Part 4: Industry common data bank (English version CWA 14113-4:2001)) |
| DIN CWA 14162-2001 |
電子數據交換的數據打印 |
(Datatyping for Electronic Data Interchange (English version CWA 14162:2001)) |
| DIN CWA 14167-1-2002 |
電子簽名用可靠系統管理認證的安全要求.第1部分:系統安全要求 |
(Security requirements for trustworthy systems managing certificates for electronic signatures - Part 1: System security requirements; English version CWA 14167-1:2001) |
| DIN CWA 14167-2-2002 |
電子簽名用可靠系統管理認證的安全要求.第2部分:CSP簽字操作密碼組件.防護外形(MCSO-PP) |
(Security requirements for trustworthy systems managing certificates for electronic signatures - Part 2: Cryptographic Module for CSP Signing Operations - Protection Profile (MCSO-PP); English version CWA 14167-2:2002) |
| DIN CWA 14168-2001 |
安全簽名生成裝置.評價保險級別4.英文版本CWA14168:2001 |
(Secure signature-creation devices - Evaluation assurance level 4; English Version CWA 14168:2001) |
| DIN CWA 14169-2001 |
安全簽名生成裝置.評價保險級別4.增加的內容.英文版本CWA14169:2001 |
(Secure signature-creation devices - Evaluation assurance level 4, augmented; English version CWA 14169:2001) |
| DIN CWA 14170-2001 |
簽名生成裝置的安全要求.英文版本CWA14170:2001 |
(Security requirements for signature creation applications; English version CWA 14170:2001) |
| DIN CWA 14171-2001 |
電子簽名驗證程序;英文版本CWA14171:2001 |
(Procedures for electronic signature verification; English version CWA 14171:2001) |
| DIN CWA 14172-1-2001 |
EESSI一致性評價指南.第1部分:通則.英文版本CWA14172-1:2001 |
(EESSI Conformity assessment guidance - Part 1: General; English version CWA 14172-1:2001) |
| DIN CWA 14172-2-2001 |
EESSI一致性評價指南.第2部分:認證權威機構和過程.英文版本CWA14172-2:2001 |
(EESSI Conformity assessment guidance - Part 2: Certification authority services and processes; English version CWA 14172-2:2001) |
| DIN CWA 14172-3-2002 |
EESSI合格評定指南.第3部分:電子簽名用可靠系統管理認證 |
(EESSI Conformity assessment guidance - Part 3: Trustworthy systems managing certificates for electronic signatures; English version CWA 14172-3:2001) |
| DIN CWA 14172-4-2002 |
EESSI合格評定指南.第4部分:電子簽名驗證用簽名創建應用和程序 |
(EESSI Conformity assessment guidance - Part 4: Signature creation applications and procedures for electronic signature verification; English version CWA 14172-4:2001) |
| DIN CWA 14172-5-2002 |
EESSI合格評定指南.第5部分:安全簽名創建設備 |
(EESSI Conformity assessment guidance - Part 5: Secure signature creation devices; English version CWA 14172-5:2001) |
| DIN CWA 14174-1-2002 |
財務交易IC卡機讀器.第1部分:商業要求 |
(Financial transactional IC card reader (FINREAD) - Part 1: Business requirements; English version CWA 14174-1:2001) |
| DIN CWA 14174-2-2002 |
金融交易IC卡機讀器.第2部分:功能要求 |
(Financial transactional IC card reader (FINREAD) - Part 2: Functional requirements; English version CWA 14174-2:2001) |
| DIN CWA 14174-3-2002 |
金融交易IC卡機讀器.第3部分:安全要求 |
(Financial transactional IC card reader (FINREAD) - Part 3: Security requirements; English version CWA 14174-3:2001) |
| DIN CWA 14174-4-2002 |
金融交易IC卡機讀器.第4部分:結構總攬 |
(Financial transactional IC card reader (FINREAD) - Part 4: Architectural overview; English version CWA 14174-4:2001) |
| DIN CWA 14174-5-2002 |
金融交易IC卡機讀器.第5部分:下載文件格式 |
(Financial transactional IC card reader (FINREAD) - Part 5: Download file format; English version CWA 14174-5:2001) |
| DIN CWA 14174-6-2002 |
金融交易IC卡機讀器.第6部分:虛擬機的定義 |
(Financial transactional IC card reader (FINREAD) - Part 6: Definition of the virtual machine; English version CWA 14174-6:2001) |
| DIN CWA 14174-7-2002 |
金融交易IC卡機讀器.第7部分:FINREAD卡機讀器應用程序接口 |
(Financial transactional IC card reader (FINREAD) - Part 7: FINREAD card reader application programming interfaces (APIs); English version CWA 14174-7:2001) |
| DIN CWA 14174-8-2002 |
金融交易IC卡機讀器.第8部分:FINREAD客戶應用程序接口 |
(Financial transactional IC card reader (FINREAD) - Part 8: FINREAD client application programming interfaces (APIs); English version CWA 14174-8:2001) |
| DIN CWA 14191-2001 |
地址管理范圍的協調.英文版CWA14191:2001 |
(Co-ordination of Directory Management Domains (DMDs); English version CWA 14191:2001) |
| DIN CWA 14192-2001 |
法人名錄的可靠性指南.英文版CWA14192-2001 |
(Guidance for the Realisation of Corporate Directories; English version CWA 14192:2001) |
| DIN CWA 14193-2001 |
亞地址的同步.事件和技術的分析.英文版CWA14193,2001 |
(Directory Synchronisation and the Meta-directory - An analysis of issues and techniques; English version CWA 14193:2001) |
| DIN CWA 14228-2001 |
電子商務的某些框架,結構和模塊的概要,英文版CWA14228:2001 |
(Summaries of some frameworks, architectures and models for electronic commerce; English version CWA 14228:2001) |
| DIN CWA 14243-1-2001 |
二次使用的輪胎材料和應用.第1部分:材料.英文版本CWA14243-1:2001 |
(Post-consumer tyre materials and applications - Part 1: Materials: English Version CWA 14243-1:2001) |
| DIN CWA 14243-2002 |
二次使用的輪胎材料和應用 |
(Post-consumer tyre materials and applications (English version CWA 14243:2002)) |
| DIN CWA 14247-2002 |
水處理用膜.材料對人類生活用的影響.試驗方法 |
(Water treatment membranes - Influence of materials on water intended for human consumption - Test method; English version CWA 14247:2001) |
| DIN CWA 14248-2002 |
funStep(家具產品和商業數據).funStep應用活動模型AAM |
(funStep (Furniture Product and Business Data) - funStep Application Activity Model AAM; English version CWA 14248:2001) |
| DIN CWA 14355-2002 |
安全簽名裝置實施指南 |
(Guidelines for the implementation of secure signature-creation devices (English version CWA 14355:2002)) |
| DIN CWA 14356-2002 |
多方式追蹤系統的協議要求 |
(Agreed requirements on multimodal tracking and tracing systems; English version CWA 14356:2001) |
| DIN CWA 14357-2002 |
因特網服務質量.項目組最終報告 |
(Quality of internet service - Project team final report; English version CWA 14357:2001) |
| DIN CWA 14515-2002 |
在互連網上建立的端口和拍賣行中的產品的類型和不同種類家具的模型 |
(Model of different categories of furniture and types of products created to build a portal and an auction house over the Internet (English version CWA 14515:2002)) |
| DIN CWA 14523-2002 |
歐洲小型企業的商業咨詢和支撐業務類型的說明 |
(Description for the types of business advice and support services provided to small enterprises in Europe (English version CWA 14523:2002)) |
| DIN CWA 14536-2002 |
開放式多模跟蹤和跟蹤系統的功能規范 |
(Functional specification of an open multimodal tracking & tracing system; English version CWA 14536:2002) |
| DIN CWA 14590-2003 |
語言能力的描述.英文版本CWA14590:2003 |
(Description of Language Capabilities; English version CWA 14590:2003) |
| DIN EN 1-1998 |
有汽化式鍋爐的燃油爐 |
(Fluid oil stoves with vaporizing burners; German version EN 1:1998) |
| DIN EN 10001-1991 |
生鐵的定義和分類 |
(Definition and classification of pig-iron; german version EN 10001:1990) |
| DIN EN 100012-1995 |
基本規范:電子件的X線透視法 |
(Basic specification: X-ray inspection of electronic components; German version EN 100012:1995) |
| DIN EN 100014-1996 |
基本規范.CECC已經審估過的平均工藝規程.極限60%置信度 |
(Basic specification: CECC assessed process average procedure - 60% confidence limit; German version EN 100014:1991) |
| DIN EN 10002-1-2001 |
金屬材料.拉力試驗.第1部分:室溫下的試驗方法 |
(Metallic materials - Tensile testing - Part 1: Method of testing at ambient temperature; German version EN 10002-1:2001) |
| DIN EN 10002-5-1992 |
金屬材料.抗拉試驗.第5部分:高溫檢驗法 |
(Tensile testing of metallic materials; method of testing at elevated temperature; german version EN 10002-5:1991) |
| DIN EN 1001-1-2005 |
木材和木基產品的耐久性.術語.第1部分:等效術語表 |
|
| DIN EN 1001-2-2005 |
木材和木基產品的耐久性.術語.第2部分:詞匯 |
|
| DIN EN 100114-1-1996 |
程序規則.質量認證程序.第1部分:認可生產廠家用CECC要求 |
(Rule of procedure - Quality assessment procedure - Part 1: CECC requirements for the approval of an organization; German version EN 100114-1:1996) |
| DIN EN 100114-6-1997 |
程序規則.質量評定程序.第6部分:對電子件生產廠家的技術認可 |
(Rule of procedure - Quality assessment procedures - Part 6: Technology approval of electronic component manufacturers; German version EN 100114-6:1996) |
| DIN EN 100114-6/A1-1999 |
電子件的CECCECC電子件的質量量評定方法.第6部分:生產廠家的技術認證.修改A1 |
(CECC-Quality assessment procedures for electronic components - Part 6: Technology approval of electronic component manufacturers; Amendment A1; German version EN 100114-6/A1:1999) |
| DIN EN 10016-1-1995 |
拉拔和/或冷軋用非合金鋼棒.第1部分:一般要求 |
(Non-alloy steel rod for drawing and/or cold rolling - Part 1: General requirements; German version EN 10016-1:1994) |
| DIN EN 10016-2-1995 |
拉拔和/或冷軋用非合金鋼棒.第2部分:通用鋼棒的特殊要求 |
(Non-alloy steel rod for drawing and/or cold rolling - Part 2: Specific requirements for general purpose rod; German version EN 10016-2:1994) |
| DIN EN 10016-3-1995 |
拉拔和/或冷軋用非合金鋼棒.第3部分:沸騰和沸騰代用低碳鋼的特殊要求 |
(Non-alloy steel rod for drawing and/or cold rolling - Part 3: Specific requirements for rimmed and rimmed substitute low carbon steel rod; German version EN 10016-3:1994) |
| DIN EN 10016-4-1995 |
拉拔和/或冷軋用非合金鋼棒.第4部分:特殊用途鋼棒的特殊要求 |
(Non-alloy steel rod for drawing and/or cold rolling - Part 4: Specific requirements for rod for special applications; German version EN 10016-4:1994) |
| DIN EN 10017-2005 |
拉制和/或冷軋鋼棒.尺寸和公差 |
|
| DIN EN 10020-2000 |
鋼的等級定義和劃分 |
(Definition and classification of grades of steel; German version EN 10020:2000) |
| DIN EN 10021-1993 |
鋼和鋼制品的一般交貨技術條件 |
(General technical delivery requirements for steel and iron products; German version EN 10021:1993) |
| DIN EN 10024-1995 |
帶傾斜的內法蘭面的工字鋼.極限尺寸和外型尺寸 |
(Hot-rolled taper flange I sections - Tolerances on shape and dimensions; German version EN 10024:1995) |
| DIN EN 10025-1-2005 |
結構鋼制熱軋產品.第1部分:一般交貨技術條件 |
|
| DIN EN 10025-1994 |
非合金結構鋼制熱軋產品.交貨技術條件 |
(Hot rolled products of non-alloy structural steels; technical delivery conditions (includes amendment A1:1993); german Version EN 10025:1990) |
| DIN EN 10025-2-2005 |
結構鋼制熱軋產品.第2部分:非合金結構鋼交貨技術條件 |
|
| DIN EN 10025-3-2005 |
結構鋼制熱軋產品.第3部分:正火/正火軋制可焊細粒結構鋼交貨技術條件 |
|
| DIN EN 10025-4-2005 |
結構鋼制熱軋產品.第4部分:熱機械軋制可焊細粒結構鋼交貨技術條件 |
|
| DIN EN 10025-5-2005 |
結構鋼制熱軋產品.第5部分:改良的耐大氣腐蝕的結構鋼交貨技術條件 |
|
| DIN EN 10025-6-2005 |
結構鋼制熱軋產品.第6部分:在淬火和回火條件下高屈服強度結構鋼扁平軋材的交貨技術條件 |
|
| DIN EN 10027-1-1992 |
鋼的命名系統.第1部分:簡稱.主要符號 |
(Designation systems for steels; steel names and principal symbols; german version EN 10027-1:1992) |
| DIN EN 10027-1-2005 |
鋼的命名系統.第1部分:鋼名稱 |
|
| DIN EN 10027-2-1992 |
鋼的命名系統.第2部分:號碼系統 |
(Designation systems for steel; numerical system; german version of EN 10027-2:1992) |
| DIN EN 10028-1-2000 |
壓力容器鋼板.第1部分:一般要求 |
(Flat products made of steel for pressure purposes - Part 1: General requirements; German version EN 10028-1:2000) |
| DIN EN 10028-2-1993 |
壓力容器鋼板.第2部分:非合金和合金耐熱鋼 |
(Flat products made from steel for pressure purposes; part 2: non-alloy and alloy steels with specified elevated temperature properties; german version EN 10028-2:1992) |
| DIN EN 10028-3-1993 |
壓力容器鋼板.第3部分:適于焊接的一般退火細顆粒結構鋼 |
(Flat products made from steel for pressure purposes; part 3: weldable fine grain steels, normalized; german version EN 10028-3:1992) |
| DIN EN 10028-4-1994 |
壓力容器鋼板.第4部分:鎳合金冷韌鋼 |
(Flat products made of steels for pressure purposes - Part 4: Nickel alloyed steels with specified low temperature properties; German version EN 10028-4:1994) |
| DIN EN 10028-5-1997 |
壓力容器鋼板.第5部分:熱機械軋制適于焊接的細晶粒結構鋼 |
(Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled; German version EN 10028-5:1996) |
| DIN EN 10028-6-1997 |
壓力容器鋼板.第6部分:調質適于焊接的細晶粒結構鋼 |
(Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered; German version EN 10028-6:1996) |
| DIN EN 10028-7-2000 |
壓力容器鋼板.第7部分:不銹鋼 |
(Flat products made of steels for pressure purposes - Part 7: Stainless steels; German version EN 10028-7:2000) |
| DIN EN 10029-1991 |
極限偏差3mm的熱軌鋼板.形狀公差.允許重量偏差 |
(Hot rolled steel plates 3 mm thick or above; tolerances on dimensions, shape and mass; german version EN 10029:1991) |
| DIN EN 10031-2003 |
鍛造用半成品.尺寸、形狀和質量公差 |
(Semi-finished products for forging - Tolerances on dimensions, shape and mass; German version EN 10031:2003) |
| DIN EN 10034-1994 |
I型和H型結構鋼.極限偏差和外型公差 |
(Structural steel I and H sections; tolerances on shape and dimensions; German version EN 10034:1993) |
| DIN EN 10036-1990 |
鋼鐵材料的化學分析.鋼和生鐵中總含碳量的測定.在氧氣流中燃燒后重量分析測定 |
(Chemical analysis of ferrous materials; determination of total carbon in steel and iron; gravimetric method after combustion in a stream of oxygen; german version EN 10036:1989) |
| DIN EN 10045-1-1991 |
金屬材料.擺錘式缺口沖擊韌性試驗.第1部分:試驗方法 |
(Charpy impact test on metallic materials; test method; german version EN 10045-1:1990) |
| DIN EN 10045-2-1993 |
金屬材料.擺式?jīng)_擊試驗.第2部分:試驗機的驗證(擺式?jīng)_擊試驗機) |
(Metallic materials; Charpy impact test; part 2: verification of the testing machine (pendulum impact); german version EN 10045-2:1992) |
| DIN EN 10048-1996 |
熱軋窄鋼帶.尺寸和形狀公差 |
(Hot-rolled narrow steel strip - Tolerances on dimensions and shape; German version EN 10048:1996) |
| DIN EN 1005-1-2002 |
機械安全.人體的物理特性.第1部分:術語和定義 |
(Safety of machinery - Human physical performance - Part 1: Terms and definitions; German version EN 1005-1:2001) |
| DIN EN 1005-2-2003 |
機械安全.人體特性.第2部分:機械及其零部件的人工裝卸 |
(Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery; German version EN 1005-2:2003) |
| DIN EN 1005-3-2002 |
機械安全.人體的物理特性.第3部分:為機械操作推薦的負荷極限 |
(Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation; German version EN 1005-3:2002) |
| DIN EN 10051-1997 |
無涂層連續熱軋非合金和合金鋼板材,薄板材和帶材.尺寸和形狀公差 |
(Continuously hot-rolled uncoated plate, sheet and strip of non-alloy and alloy steels - Tolerances of dimensions and shape (includes Amendment A1:1997); German version EN 10051:1991 + A1:1997) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com