標準號 |
中文名稱 |
英文名稱 |
| DIN EN ISO 5508-1995 |
動植物脂肪和油.脂肪酸甲酯的氣一液相色譜分析法 |
Animal and vegetable fats and oils - Analysis by gas chromatography of methyl esters (ISO 5508:1990); German version EN ISO 5508:1995 |
| DIN EN ISO 5509-2001 |
動物和植物脂肪和油.脂肪酸甲酯的制備(ISO 5509:2000) |
Animal and vegetable fats and oils - Preparation of methyl esters of fatty acids (ISO 5509:2000); German version EN ISO 5509:2000 |
| DIN EN ISO 5534-2004 |
干酪和融化干酪.總固形物含量的測定(參照法) |
|
| DIN EN ISO 5537-2004 |
奶粉.水含量的測定(參照法) |
|
| DIN EN ISO 5555-2002 |
動植物脂肪和油.取樣 |
Animal and vegetable fats and oils - Sampling (ISO 5555:2001); German version EN ISO 5555:2001 |
| DIN EN ISO 5659-1-1999 |
塑料.煙霧產生.第1部分:檢驗光密度的導則 |
Plastics - Smoke generation - Part 1: Guidance on optical-density testing (ISO 5659-1:1996); German version EN ISO 5659-1:1999 |
| DIN EN ISO 5659-2-1998 |
塑料.煙霧產生.第2部分:用單箱試驗法測定光密度 |
Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test (ISO 5659-2:1994, including Technical Corrigendum 1:1997); German version EN ISO 5659-2:1998 |
| DIN EN ISO 5667-13-1998 |
水質.取樣.第13部分:從水處理及水制備設備中淤泥取樣指引 |
Water quality - Sampling - Part 13: Guidance on sampling of sludges from sewage and water treatment works (ISO 5667-13:1997); German version EN ISO 5667-13:1997 |
| DIN EN ISO 5667-13-1998 |
水質.取樣.第13部分:從水處理及水制備設備中淤泥取樣指引 |
Water quality - Sampling - Part 13: Guidance on sampling of sludges from sewage and water treatment works (ISO 5667-13:1997); German version EN ISO 5667-13:1997 |
| DIN EN ISO 5667-16-1999 |
水質.取樣.第16部分:取樣和進行生物檢驗的方法的指南 |
Water quality - Sampling - Part 16: Guidance on biotesting of samples (ISO 5667-16:1998); German version EN ISO 5667-16:1998 |
| DIN EN ISO 5667-19-2004 |
水質.取樣.第19部分:海底沉積物的抽樣指南 |
|
| DIN EN ISO 5667-3-1996 |
水質.取樣.第3部分:樣品的封存和處理說明 |
Water quality, sampling - Part 3: Guidance on the preservation and handling of samples (ISO 5667-3:1994); German version EN ISO 5667-3:1995 |
| DIN EN ISO 5667-3-2004 |
水質.采樣.第3部分:水樣保存和處理方法指南 |
|
| DIN EN ISO 5674-2004 |
農林業用拖拉機和機械.動力輸出軸護罩.強度和磨損試驗及驗收標準 |
|
| DIN EN ISO 5764-2002 |
牛奶.冰點的測定.熱敏電阻冰點測定法(參考法) |
Milk - Determination of freezing point - Thermistor cryoscope method (Reference method) (ISO 5764:2002); German version EN ISO 5764:2002 |
| DIN EN ISO 5771-1996 |
輸送無水氨用橡膠軟管和軟管組件.規范 |
Rubber hose and hose assemblies for transferring anhydrous ammonia - Specification (ISO 5771:1994, including Corr 1:1995); German version EN ISO 5771:1996 |
| DIN EN ISO 5774-2000 |
壓縮空氣用織物增強塑料軟管.規范 |
Plastics hoses, textile-reinforced, for compressed air - Specification (ISO 5774:1997); German version EN ISO 5774:2000 |
| DIN EN ISO 5778-2000 |
造船技術.防風雨的小型鋼艙蓋 |
Ships and marine technology - Small weathertight steel hatches (ISO 5778:1998); German version EN ISO 5778:2000 |
| DIN EN ISO 580-2005 |
塑料管和管道系統.噴射鑄造熱塑性配件.熱效應直觀評估法 |
|
| DIN EN ISO 580-2005 |
塑料管和管道系統.噴射鑄造熱塑性配件.熱效應直觀評估法 |
|
| DIN EN ISO 5826-2003 |
電阻焊設備.變壓器.適用于所有變壓器的通用規范 |
(Resistance welding equipment - Transformers - General specifications applicable to all transformers (ISO 5826:1999); German version EN ISO 5826:2003) |
| DIN EN ISO 5828-2001 |
電阻焊設備.連接水冷耳的接線柱用的輔助連接電纜.尺寸和特征 |
Resistance welding equipment - Secondary connecting cables with terminals connected to water-cooled lugs - Dimensions and characteristics (ISO 5828:2001); German version EN ISO 5828:2001 |
| DIN EN ISO 583-1-2000 |
帶有織物胎殼的傳送帶.覆蓋物的厚度和總厚度.第1部分:試驗方法 |
Conveyor belts with a textile carcass - Total thickness and thickness of covers of elements - Part 1: Method of test (ISO 583-1:1999); German version EN ISO 583-1:1999 |
| DIN EN ISO 584-1998 |
塑料.未飽和的聚酯樹脂.80℃時的反應性測定(常規方法) |
Plastics - Unsaturated polyester resins - Determination of reactivity at 80 C (conventional method) (ISO 584:1982); German version EN ISO 584:1997 |
| DIN EN ISO 585-2000 |
塑料.不增塑的乙酸纖維素.含水量的測定 |
Plastics - Unplasticized cellulose acetate - Determination of moisture content (ISO 585:1990); German version EN ISO 585:1999 |
| DIN EN ISO 591-1-2001 |
涂料用二氧化鈦顏料.第1部分:規范和試驗方法 |
Titanium dioxide pigments for paints - Part 1: Specifications and methods of test (ISO 591-1:2000); German version EN ISO 591-1:2000 |
| DIN EN ISO 595-2-1994 |
醫用可重復使用的全玻璃或金屬-玻璃注射器.第2部分:設計.性能要求和試驗 |
Reusable all-glass or metal-and-glass syringes for medical use - Part 2: Design, performance requirements and tests (ISO 595-2:1987); German version EN ISO 595-2:1994 |
| DIN EN ISO 5961-1995 |
水的質量.鎘的測定.用火焰原子吸收光譜法測定鎘 |
Water quality - Determination of cadmium by atomic absorption spectrometry (ISO 5961:1994); German version EN ISO 5961:1995 |
| DIN EN ISO 5981-1998 |
橡膠或塑料涂層的織物.抗復合彎曲剪切和磨損的測定 |
Rubber- or plastics-coated fabrics - Determination of resistance to combined shear flexing and rubbing (ISO 5981:1997); German version EN ISO 5981:1997 |
| DIN EN ISO 5983-1-2005 |
動物飼料.氮含量的測定和粗蛋白質的計算.第1部分:基爾達斯法 |
|
| DIN EN ISO 5983-2-2005 |
動物飼料.氮含量的測定和粗蛋白質的計算.第2部分:塊分解/蒸汽蒸餾法 |
|
| DIN EN ISO 5999-2004 |
軟質泡沫聚合材料.不包括地毯襯底的承重用聚氨基甲酸酯泡沫體.規范 |
|
| DIN EN ISO 60-2000 |
塑料.可由專用漏斗注入的材料表觀密度的測定 |
Plastics - Determination of apparent density of material that can be poured from a specified funnel (ISO 60:1977); German version EN ISO 60:1999 |
| DIN EN ISO 6009-1994 |
一次性使用的皮下注射針.識別用色標 |
Hypodermic needles for single use - Colour coding for identification (ISO 6009:1992); German version EN ISO 6009:1994 |
| DIN EN ISO 604-1997 |
塑料.壓縮性能的測定 |
Plastics - Determination of compressive properties (ISO 604:1993); German version EN ISO 604:1996 |
| DIN EN ISO 6042-2000 |
造船.防風雨的單扇鋼門 |
Ships and marine technology - Weathertight single-leaf steel doors (ISO 6042:1998); German version EN ISO 6042:2000 |
| DIN EN ISO 61-2000 |
塑料.不能由專用漏斗注入的模壓材料表觀密度的測定 |
Plastics - Determination of apparent density of moulding material that cannot be poured from a specified funnel (ISO 61:1976); German version EN ISO 61:1999 |
| DIN EN ISO 6103-2000 |
粘合的磨料制品.驗收試驗可允許的磨輪不平衡 |
Bonded abrasive products - Permissible unbalances of grinding wheels as delivered - Testing (ISO 6103:1999); German version EN ISO 6103:1999 |
| DIN EN ISO 6103-2005 |
粘合磨料產品.交貨時砂輪的可允許不平衡性.靜態試驗 |
|
| DIN EN ISO 613-2002 |
船舶和航海技術.磁羅盤、羅盤座和方位讀數裝置.B級 |
Ships and marine technology - Magnetic compasses, binnacles and azimuth reading devices - Class B (ISO 613:2000); German version EN ISO 613:2001 |
| DIN EN ISO 6157-2-2004 |
緊固件.表面缺陷.第2部分:螺母 |
|
| DIN EN ISO 6158-2004 |
金屬涂層.工程用鉻電鍍層 |
|
| DIN EN ISO 6165-2002 |
土方機械.基本類型.詞匯 |
Earth-moving machinery - Basic types - Vocabulary (ISO 6165:2001); German version EN ISO 6165:2002 |
| DIN EN ISO 6179-2001 |
硫化或熱塑橡膠.橡膠薄板和橡膠涂層織物.揮發性液體滲透速度的測定(重力測定技術) |
Rubber, vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique) (ISO 6179:1998); German version EN ISO 6179:2000 |
| DIN EN ISO 6185-1-2002 |
充氣艇.第1部分:發動機最大額定功率為4.5kW的動力艇 |
Inflatable boats - Part 1: Boats with a maximum motor power rating of 4,5 kW (ISO 6185-1:2001); German version EN ISO 6185-1:2001 |
| DIN EN ISO 6185-2-2002 |
充氣艇.第2部分:發動機最大額定功率為4.5kW到(并包括)15 kW的動力艇 |
Inflatable boats - Part 2: Boats with a maximum motor power rating of 4,5 kW to 15 kW inclusive (ISO 6185-2:2001); German version EN ISO 6185-2:2001 |
| DIN EN ISO 6185-3-2002 |
充氣艇.第2部分:發動機最大額定功率為15kW及更大的動力艇 |
Inflatable boats - Part 3: Boats with a maximum motor power rating of 15 kW and greater (ISO 6185-3:2001); German version EN ISO 6185-3:2001 |
| DIN EN ISO 6186-1998 |
塑料.松散性測定 |
Plastics - Determination of pourability (ISO 6186:1998); German version EN ISO 6186:1998 |
| DIN EN ISO 62-1999 |
塑料.吸水性的測定 |
Plastics - Determination of water absorption (ISO 62:1999); German version EN ISO 62:1999 |
| DIN EN ISO 6222-1999 |
水質.可培養微生物的計數.通過對營養瓊脂培養基培養的計群法 |
Water quality - Enumeration of culturable micro-organisms - Colony count by inoculation in a nutrient agar culture medium (ISO 6222:1999); German version EN ISO 6222:1999 |
| DIN EN ISO 6224-1997 |
一般目的用水時使用的帶織物加固內襯的橡膠軟管.規范 |
(Plastics hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 6224:1995); German version EN ISO 6224:1997) |
| DIN EN ISO 6245-2003 |
石油產品.灰分的測定 |
(Petroleum products - Determination of ash (ISO 6245:2001); German version EN ISO 6245:2002) |
| DIN EN ISO 6246-1998 |
石油產品.易揮發和中等蒸餾燃料的蒸發殘?jiān)?頂吹法 |
(Petroleum products - Gum content of light and middle distillate fuels - Jet evaporation method (ISO 6246:1995); German version EN ISO 6246:1996) |
| DIN EN ISO 6251-1998 |
液化石油氣.對銅的腐蝕性.銅片試驗 |
(Liquefied petroleum gases - Corrosiveness to copper - Copper strip test (ISO 6251:1996); German version EN ISO 6251:1998) |
| DIN EN ISO 6252-1998 |
塑料.環境應力破裂(ESC)測定.持久應力試驗 |
(Plastics - Determination of environmental stress cracking (ESC) - Constant-tensile-stress method (ISO 6252:1992); German version EN ISO 6252:1997) |
| DIN EN ISO 6259-1-2002 |
熱塑管.拉伸特性的測定.第1部分:通用試驗方法 |
(Thermoplastics pipes - Determination of tensile properties - Part 1: General test method (ISO 6259-1:1997); German version EN ISO 6259-1:2001) |
| DIN EN ISO 6270-1-2002 |
涂料和清漆.耐濕度的測定.第1部分:連續冷凝作用 |
Paints and varnishes - Determination of resistance to humidity - Part 1: Continuous condensation (ISO 6270-1:1998); German version EN ISO 6270-1:2001 |
| DIN EN ISO 6272-1-2004 |
色漆和清漆.快速變形(耐沖擊)試驗.第1部分:大區域壓頭落錘試驗 |
|
| DIN EN ISO 6272-1994 |
色漆和清漆.落錘試驗 |
Paints and varnishes - Falling-weight test (ISO 6272:1993); German version EN ISO 6272:1994 |
| DIN EN ISO 6320-2000 |
動植物脂肪和油.折射指數的測定 |
Animal and vegetable fats and oils - Determination of refractive index (ISO 6320:2000); German version EN ISO 6320:2000 |
| DIN EN ISO 6321-2002 |
動植物脂肪和油.開口毛細管中熔點(裂解點)測定 |
Animal and vegetable fats and oils - Determination of melting point in open capillary tubes (slip point) (ISO 6321:2002); German version EN ISO 6321:2002 |
| DIN EN ISO 6326-3-1998 |
天燃?xì)?硫化物的測定.第3部分:用電勢分析法對硫化氫,硫醇式硫和硫化羰式硫的測定 |
Natural gas - Determination of sulfur compounds - Part 3: Determination of hydrogen sulfide, mercaptan sulfur and carbonyl sulfide sulfur by potentiometry (ISO 6326-3:1989); German version EN ISO 6326-3:1997 |
| DIN EN ISO 6326-5-1998 |
天燃?xì)?硫化物的測定.第5部分:林格聶爾(lingener)燃燒法 |
Natural gas - Determination of sulfur compounds - Part 5: Lingener combustion method (ISO 6326-5:1989); German version EN ISO 6326-5:1997 |
| DIN EN ISO 6330-2001 |
紡織品.織物試驗的家庭洗滌和干燥程序 |
Textiles - Domestic washing and drying procedures for textile testing (ISO 6330:2000); German version EN ISO 6330:2000 |
| DIN EN ISO 6341-1996 |
水質.抑制大型Daphnia magna Straus(枝角目,甲殼綱)活動性的測定.劇毒試驗 |
Water quality - Determination of the inhibition of the mobility of Daphnia magna Straus (Cladocera, Crustacea) - Acute toxicity test (ISO 6341:1996); German version EN ISO 6341:1996 |
| DIN EN ISO 6346-1996 |
ISO集裝箱.編碼.識別和標記 |
Freight containers - Coding, identification and marking (ISO 6346:1995); German version EN ISO 6346:1995 |
| DIN EN ISO 6360-1-2004 |
牙醫學.旋轉器械的數字編碼系統.第1部分:一般特點 |
|
| DIN EN ISO 6360-2-2005 |
牙科學.旋轉器械用數字編碼體系.第2部分:形狀 |
|
| DIN EN ISO 6360-4-2004 |
牙科學.旋轉器械數字編碼體系.第4部分:金剛石器械的特性 |
|
| DIN EN ISO 6360-6-2004 |
牙科學.旋轉器械數字編碼體系.第6部分:磨削器械特性 |
|
| DIN EN ISO 6383-1-2004 |
塑料.薄膜和薄板.耐撕裂性的測定.第1部分:褲型撕裂法 |
|
| DIN EN ISO 6383-2-2004 |
塑料.薄膜和薄板.耐撕裂性的測定.第2部分:埃爾曼多法 |
|
| DIN EN ISO 6385-2004 |
工作系統設計的人類工效原則 |
|
| DIN EN ISO 6401-2005 |
塑料.氯乙烯均聚物和共聚物樹脂.剩余氯乙烯單體的測定.氣相色譜法 |
|
| DIN EN ISO 6402-1-2003 |
塑料.丙烯腈-苯乙烯-丙烯酸酯、丙烯腈-(乙烯-丙烯-二烯烴)-苯乙烯和丙烯腈-(氯化聚乙烯)-苯乙烯模制和擠壓材料.第1部分:命名系統和規范基礎 |
Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specification |
| DIN EN ISO 6402-2-1999 |
塑料.耐沖擊丙烯腈/苯乙烯模制和擠壓材料(ASA,AES,ACS),丁二烯改型材料除外.第2部分:試驗試樣的制備和特性的測定 |
Plastics - Impact-resistant acrylonitrile/styrene (ASA, AES, ACS) moulding and extrusion materials, excluding butadiene-modified materials - Part 2: Preparation of test specimens and determination of properties (ISO 6402-2:1994); German version EN ISO 640 |
| DIN EN ISO 6402-2-2004 |
塑料.丙烯腈-苯乙烯-丙烯酸酯(ASA)、丙烯腈-(乙烯-丙烯-二烯烴)-苯乙烯(AEPDS)和丙烯腈-(氯化聚乙烯)-苯乙烯(ACS)模塑和擠塑材料.第2部分:試樣制備和性能測定 |
|
| DIN EN ISO 6416-2005 |
水文測量.超聲波(聲波)法測量流量 |
|
| DIN EN ISO 642-2000 |
鋼.端頭淬硬性試驗(喬米尼(Jominy)試驗) |
Steel - Hardenability test by end quencing (Jominy test) (ISO 642:1999); German version EN ISO 642:1999 |
| DIN EN ISO 6427-1998 |
塑料.通過有機溶劑測定可萃取成份(標準法) |
Plastics - Determination of matter extractable by organic solvents (conventional methods) (ISO 6427:1992); German version EN ISO 6427:1998 |
| DIN EN ISO 643 Berichtigung 1-2004 |
DIN EN ISO 643-2003的勘誤 |
|
| DIN EN ISO 643-2003 |
鋼.表面粒度的縮微照相測定 |
(Steels - Micrographic determination of the apparent grain size (ISO 643:2003); German version EN ISO 643:2003) |
| DIN EN ISO 6468-1997 |
水質.選出的有機氯殺蟲劑,多氯聯苯和氯苯的測定.在液-液萃取后的氣相色譜法 |
Water quality - Determination of certain organochlorine insecticides, polychlorinated biphenyls and chlorobenzenes - Gas-chromatographic method after liquid-liquid extraction (ISO 6468:1996); German version EN ISO 6468:1996 |
| DIN EN ISO 6497-2005 |
動物飼料.抽樣 |
|
| DIN EN ISO 6497-2005 |
動物飼料.抽樣 |
|
| DIN EN ISO 6497-2005 |
動物飼料.抽樣 |
|
| DIN EN ISO 6506-1-1999 |
金屬材料.布氏硬度試驗.第1部分:試驗方法 |
Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:1999); German version EN ISO 6506-1:1999 |
| DIN EN ISO 6506-2 Bb.1-1999 |
金屬材料.布氏硬度試驗.第2部分:硬度試驗機的校驗.依據驗證結果及為試驗機與沖頭設計所作修正 |
Metallic materials - Brinell hardness test - Part 2: Verification and calibration of the hardness testing machines; recommendations according to the verification and for the design of the testing machine and the plunger |
| DIN EN ISO 6506-2-1999 |
金屬材料.布氏硬度試驗.第2部分:硬度試驗機械的校準與標定 |
Metallic materials - Brinell hardness test - Part 2: Verification and calibration of hardness testing machines (ISO 6506-2:1999); German version EN ISO 6506-2:1999 |
| DIN EN ISO 6506-3 Bb.1-1999 |
金屬材料.布氏硬度試驗.第3部分:標準試塊校驗.標準試塊設計樣品 |
Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks; example of design of reference blocks |
| DIN EN ISO 6506-3-1999 |
金屬材料.布氏硬度試驗.第3部分:標準試塊的校驗 |
Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks (ISO 6506-3:1999); German version EN ISO 6506-3:1999 |
| DIN EN ISO 6507-1-1998 |
金屬材料.維氏硬度試驗.第1部分:試驗方法 |
Metallic materials - Vickers hardness test - Part 1: Test method (ISO 6507-1:1997); German version EN ISO 6507-1:1997 |
| DIN EN ISO 6507-2 Bb.1-1998 |
金屬材料.維氏硬度檢驗.第2部分:試驗機械檢驗.檢驗和試驗機械結構的建議及打壓印章 |
Metallic materials - Vickers hardness test - Part 2: Verification of the testing machines; recommendations according to the verification and for the performance of the testing machine and the plunger |
| DIN EN ISO 6507-2-1998 |
金屬材料.維氏硬度試驗.第2部分:試驗機械的校準 |
Metallic materials - Vickers hardness test - Part 2: Verification of the testing machines (ISO 6507-2:1997); German version EN ISO 6507-2:1997 |
| DIN EN ISO 6507-3 Bb.1-1998 |
金屬材料.維氏硬度檢驗.第3部分:硬度對比板的校準.使用硬度對比板舉例 |
Metallic materials - Vickers hardness test - Part 3: Calibration of the reference blocks; example of performance of the reference blocks |
| DIN EN ISO 6507-3-1998 |
金屬材料.維氏硬度試驗.第3部分:標準塊的校準 |
Metallic materials - Vickers hardness test - Part 3: Calibration of the reference blocks (ISO 6507-3:1997); German version EN ISO 6507-3:1997 |
| DIN EN ISO 6508-1 Berichtigung 1-2000 |
DIN EN ISO 6508-1的技術勘誤 |
Corrigendum to DIN EN ISO 6508-1:1999-10 |
| DIN EN ISO 6508-1-1999 |
金屬材料.洛氏硬度試驗(等級A、B、C、D、E、F、G、H、K、N、T).第1部分:試驗方法 |
Metallic materials - Rockwell hardness test (scales A, B, C, D, E, F, G, H, K, N, T) - Part 1: Test method (ISO 6508-1:1999); German version EN ISO 6508-1:1999 |
| DIN EN ISO 6508-2 Bb.1-1999 |
金屬材料.洛氏硬度試驗(等級A,B,C,D,E,F,G,H,K,N,T).第2部分:硬度試驗機械的標定與校驗.根據標定及為試驗機械與沖頭所作推薦 |
Metallic materials - Rockwell hardness test (scales A, B, C, D, E, F, G, H, K, N, T) - Part 2: Verification and calibration of the hardness testing machines; recommendations according to the verification and for the design of the testing machine and the p |
| DIN EN ISO 6508-2-1999 |
金屬材料.洛氏硬度試驗(等級A,B,C,D,E,F,G,H,K,N,T).第2部分:試驗機械的標定與校驗 |
Metallic materials - Rockwell hardness test (scales A, B, C, D, E, F, G, H, K, N, T) - Part 2: Verification and calibration of testing machines (ISO 6508-2:1999); German version EN ISO 6508-2:1999 |
| DIN EN ISO 6508-3 Bb.1-1999 |
金屬材料.洛氏硬度試驗(等級A,B,C,D,E,F,G,H,K,N,T).第3部分:標準塊校驗.標準塊性能樣品 |
Metallic materials - Rockwell hardness test (scales A, B, C, D, E, F, G, H, K, N, T) - Part 3: Calibration of reference blocks; example of performance of the reference blocks |
| DIN EN ISO 6508-3-1999 |
金屬材料.洛氏硬度試驗(等級A,B,C,D,E,F,G,H,K,N,T).標準塊校驗 |
Metallic materials - Rockwell hardness test (scales A, B, C, D, E, F, G, H, K, N, T) - Part 3: Calibration of reference blocks (ISO 6508-3:1999); German version EN ISO 6508-3:1999 |
| DIN EN ISO 6509-1995 |
金屬和合金的腐蝕.黃銅耐脫鋅性的測定 |
Corrosion of metals and alloys - Determination of dezincification resistance of brass (ISO 6509:1981); German version EN ISO 6509:1995 |
| DIN EN ISO 6520-1-1999 |
焊接及相關工藝.金屬材料中幾何的不均勻性分類.第1部分:熔焊 |
Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding (ISO 6520-1:1998); Trilingual version EN ISO 6520-1:1998 |
| DIN EN ISO 6520-2-2002 |
焊接及相關工藝.金屬材料中幾何缺陷的分類.第2部分:壓焊 |
Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 2: Welding with pressure (ISO 6520-2:2001); German version EN ISO 6520-2:2001 |
| DIN EN ISO 6529-2003 |
防護服.化學試劑防護.防護服面料液體和氣體的滲透性測定 |
Protective clothing - Protection against chemicals - Determination of resistance of protective clothing materials to permeation by liquids and gases (ISO 6529:2001); German version EN ISO 6529:2001 |
| DIN EN ISO 6530-2005 |
防護服裝.對液態化學制品的防護.材料抗?jié)B透性的試驗方法 |
|
| DIN EN ISO 6530-2005 |
防護服裝.對液態化學制品的防護.材料抗?jié)B透性的試驗方法 |
|
| DIN EN ISO 6551-1996 |
石油液體和氣體.動態測量的正確可靠性.電脈沖數據和/或電子脈沖數據的電纜傳輸 |
Petroleum liquids and gases - Fidelity and security of dynamic measurement - Cabled transmission of electric and/or electronic pulsed data (ISO 6551:1982); German version EN ISO 6551:1995 |
| DIN EN ISO 6570-2004 |
天然氣.烴液潛在含量的測定.重量分析法 |
|
| DIN EN ISO 6579-2003 |
食品和動物飼料的微生物學.測沙門氏菌用水平檢測法 |
Microbiology of food and animal feeding stuffs - Horizontal method for the detection of Salmonella spp. (ISO 6579:2002); German version EN ISO 6579:2002 |
| DIN EN ISO 658-2002 |
油料種子.雜質含量的測定 |
Oilseeds - Determination of content of impurities (ISO 658:2002); German version EN ISO 658:2002 |
| DIN EN ISO 659-1998 |
油籽.油含量測定(參照法) |
Oilseeds - Determination of oil content (Referenz method) (ISO 659:1998); German version EN ISO 659:1998 |
| DIN EN ISO 660-1999 |
動植物脂肪和油.酸值和酸度的測定 |
Animal and vegetable fats and oils - Determination of acid value and acidity (ISO 660:1996); German version EN ISO 660:1999 |
| DIN EN ISO 660-2005 |
動植物油脂.酸值和酸度的測定 |
|
| DIN EN ISO 6603-1-2000 |
塑料.硬質塑料耐沖擊性能的測定.第1部分:非儀器操作的沖擊試驗 |
Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1: Non-instrumented impact testing (ISO 6603-1:2000); German version EN ISO 6603-1:2000 |
| DIN EN ISO 6603-2-2002 |
塑料.硬質塑料擊穿性能的測定.第2部分:儀器沖擊試驗 |
Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented puncture test (ISO 6603-2:2000); German version EN ISO 6603-2:2000 |
| DIN EN ISO 661-1995 |
動植物脂肪和油.試樣的制備 |
Animal and vegetable fats and oils - Preparation of test sample (ISO 661:1989); German version EN ISO 661:1995 |
| DIN EN ISO 661-2005 |
動植物油脂.試樣的制備 |
|
| DIN EN ISO 662-2001 |
動物和植物油脂.水分和揮發物含量的測定 |
Animal and vegetable fats and oils - Determination of moisture and volatile matter content (ISO 662:1998); German version EN ISO 662:2000 |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com