標準號 |
中文名稱 |
英文名稱 |
| DIN EN 12560-1-2001 |
法蘭及其接頭.分級標識法蘭用墊圈.第1部分:有或無插件的非金屬平墊圈 |
(Flanges and their joints - Gaskets for class-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts; German version EN 12560-1:2001) |
| DIN EN 12560-2-2001 |
法蘭及其接頭.分級標識法蘭用墊圈.第2部分:鋼法蘭用繞制螺旋形密封墊 |
(Flanges and their joints - Gaskets for class-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges; German version EN 12560-2:2001) |
| DIN EN 12560-3-2001 |
法蘭及其接頭.分級標識法蘭用墊圈.第3部分:非金屬PTFE包封墊圈 |
(Flanges and their joints - Gaskets for class-designated flanges - Part 3: Non-metallic PTFE envelope gaskets; German version EN 12560-3:2001) |
| DIN EN 12560-4-2001 |
法蘭及其接頭.分級標識法蘭用墊圈.第4部分:鋼法蘭用的波紋形、平的或有槽的金屬和嵌條金屬墊圈 |
(Flanges and their joints - Gaskets for class-designated flanges - Part 4: Corrugated, flat or grooved metallic and fillet metallic gaskets for use with steel flanges; German version EN 12560-4:2001) |
| DIN EN 12560-5-2001 |
法蘭及其接頭.分級標識法蘭用墊圈.第5部分:鋼法蘭用的金屬環接頭墊圈 |
(Flanges and their joints - Gaskets for class-designated flanges - Part 5: Metallic ring-joint gaskets for use with steel flanges; German version EN 12560-5:2001) |
| DIN EN 12560-6-2004 |
法蘭及其接頭.分級標示法蘭用墊圈.第6部分:鋼法蘭用涂覆的有鋸齒金屬墊圈 |
|
| DIN EN 12560-7-2004 |
法蘭及其接頭.等級標示法蘭用墊圈.第7部分:與鋼法蘭一起使用的金屬涂覆有套墊圈 |
|
| DIN EN 12561-1-1999 |
鐵路應用.罐車.第1部分:輸送危險物品用罐車的標識 |
(Railway applications - Tank wagons - Part 1: Marking of tank wagons for the carriage of dangerous goods; German version EN 12561-1:1998) |
| DIN EN 12561-2-2003 |
鐵路設施.油罐車.第2部分:包括回流蒸氣的液體產品用底卸式裝置 |
(Railway applications - Tank wagons - Part 2: Bottom emptying devices for liquid products including vapour return; German version EN 12561-2:2002) |
| DIN EN 12561-3-2003 |
鐵路設施.油罐車.第3部分:壓力下液化氣用底部裝卸式裝置 |
(Railway applications - Tank wagons - Part 3: Bottom filling and emptying devices for gases liquefied under pressure; German version EN 12561-3:2002) |
| DIN EN 12561-4-2003 |
鐵路設施.油罐車.第4部分:液態產品用頂部裝卸式裝置 |
(Railway applications - Tank wagons - Part 4: Top devices for top emptying and filling of liquid products; German version EN 12561-4:2002) |
| DIN EN 12561-5-2003 |
鐵路設施.油罐車.第5部分:液態產品用頂部裝填、底部卸料式裝置 |
(Railway applications - Tank wagons - Part 5: Top devices for bottom emptying and top filling of liquid products; German version EN 12561-5:2002) |
| DIN EN 12561-6-2003 |
鐵路設施.油罐車.第6部分:人孔 |
(Railway applications - Tank wagons - Part 6: Manholes; German version EN 12561-6:2002) |
| DIN EN 12561-7-2004 |
鐵路設施.油罐車.第7部分:月臺和梯子 |
|
| DIN EN 12561-8-2004 |
鐵路設施.油罐車.第8部分:加熱連接裝置 |
|
| DIN EN 12562-1999 |
紡織物.帕拉-芳族聚酰胺長絲紗.檢驗方法 |
(Textiles - Para-aramid multifilament yarns - Test methods; German version EN 12562:1999) |
| DIN EN 12563-1999 |
非活性外科植入物.關節部位用植入物.髖關節部位用植入物的特殊要求 |
(Non-active surgical implants - Joint replacement implants - Specific requirements for hip joint replacement implants; German version EN 12563:1998) |
| DIN EN 12564-1999 |
非活性外科植入物.關節部位用植入物.膝關節部位用植入物的特殊要求 |
(Non-active surgical implants - Joint replacement implants - Specific requirements for knee joint replacement implants; German version EN 12564:1998) |
| DIN EN 12566-1-2000 |
達到50PT的小型廢水處理系統.第1部分:預制的化糞池 |
(Small wastewater treatment systems for up to 50 PT - Part 1: Prefabricated septic tanks; German version EN 12566-1:2000) |
| DIN EN 12566-1-2004 |
50PT及以下的小型廢水處理系統.第1部分:預制的化糞池 |
|
| DIN EN 12566-3-2005 |
高達50PT的小型廢水處理系統.第3部分:整裝的和/或現場裝配的家用污水處理設備 |
|
| DIN EN 12567-2000 |
工業閥門.液化天然氣用隔離閥.適用性驗證試驗規范 |
(Industrial valves - Isolating valves for LNG - Specification for suitability and appropriate verification tests; German version EN 12567:2000) |
| DIN EN 12568-1998 |
腳腿防護裝置.腳趾罩和金屬穿透保護襯墊的要求和試驗方法 |
(Foot and leg protectors - Requirements and test methods for toecaps and metal penetration resistant inserts; German version EN 12568:1998) |
| DIN EN 12569-2001 |
工業閥.化學和石油化工加工用閥門.要求和試驗 |
(Industrial valves - Valves for chemical and petrochemical process industry - Requirements and tests (includes Corrigendum AC:2000); German version EN 12569:1999 + AC:2000) |
| DIN EN 12570-2000 |
工業閥門.操作件尺寸控制的方法 |
(Industrial valves - Method for sizing the operating element; German version EN 12570:2000) |
| DIN EN 12571-1999 |
與食品接觸的材料和物品.供料罐中已裝好食品用傳輸單.熱度和衛生要求及檢驗方法 |
(Materials and articles in contact with foodstuffs - Transport units for catering containers containing prepared foodstuffs - Thermal and hygienic requirements and testing; German version EN 12571:1998) |
| DIN EN 12572-1999 |
人工攀登設備.安全防護點,穩定性要求和檢驗方法 |
(Artificial climbing structures - Protection points, stability requirements and test methods; German version EN 12572:1998) |
| DIN EN 12573-1-2000 |
焊接固定無壓力熱塑性槽罐.第1部分:總則 |
(Welded static non-pressurised thermoplastic tanks - Part 1: General principles; German version EN 12573-1:2000) |
| DIN EN 12573-2-2000 |
焊接固定無壓力熱塑性槽罐.第2部分:立式圓柱形槽罐的計算 |
(Welded static non-pressurised thermoplastic tanks - Part 2: Calculation of vertical cylindrical tanks; German version EN 12573-2:2000) |
| DIN EN 12573-3-2000 |
焊接固定無壓力熱塑性槽罐.第3部分:單層壁的長方形槽罐的設計和計算 |
(Welded static non-pressurized thermoplastic tanks - Part 3: Design and calculation for single skin rectangular tanks; German version EN 12573-3:2000) |
| DIN EN 12573-4-2000 |
焊接固定無壓力熱塑性槽罐.第4部分:法蘭連接的設計和計算 |
(Welded static non-pressurised thermoplastic tanks - Part 4: Design and calculation of flanged joints; German version EN 12573-4:2000) |
| DIN EN 12574-1-2002 |
固定的廢棄物容器.第1部分:套管、雙向套管或袖珍提升裝置用帶平或圓形罩的1700lto5000l容量的容器.尺寸和設 |
(Stationary waste containers - Part 1: Containers with a capacity from 1700 l to 5000 l with flat or dome lid(s), for trunnion, double trunnion or pocket lifting devices; Dimensions and design; German version EN 12574-1:2002) |
| DIN EN 12574-2-2002 |
固定的廢棄物容器.第2部分:性能要求和試驗方法 |
(Stationary waste containers - Part 2: Performance requirements and test methods; German version EN 12574-2:2002) |
| DIN EN 12574-3-2002 |
固定的廢棄物容器.第3部分:安全要求和健康要求 |
(Stationary waste containers - Part 3: Safety and health requirements; German version EN 12574-3:2002) |
| DIN EN 12575-1998 |
塑料.可淬火模塑材料.SMC中纖維濕潤級測定 |
(Plastics - Thermoset moulding compounds - Determination of the degree of fibre wet out in SMC; German version EN 12575:1998) |
| DIN EN 12576-1998 |
塑料.纖維增強復合材料.SMC,BMC和DMC制模壓檢驗板的制造 |
(Plastics - Fibre reinforced composites - Preparation of compression moulded test plates of SMC, BMC and DMC; German version EN 12576:1998) |
| DIN EN 12579-2000 |
土壤改進劑和生長劑.抽樣 |
(Soil improvers and growing media - Sampling; German version EN 12579:1999) |
| DIN EN 12580-2000 |
土壤改進劑和生長劑.量的測定 |
(Soil improvers and growing media - Determination of a quantity; German version EN 12580:1999) |
| DIN EN 12582-1999 |
表面活性材料.按照用HPLC/ELSD法克分子質量測定非離子表面活性材料(乙氧基)中聚乙二醇總含量的測定 |
(Surface active agents - Determination of the polyethylene glycol content according to molar mass in non-ionic surface active agents (ethoxylated) by HPLC/ELSD; German version EN 12582:1999) |
| DIN EN 12583-2000 |
供氣系統.壓縮機泵站.功能要求 |
(Gas supply systems - Compressor stations - Functional requirements; German version EN 12583:2000) |
| DIN EN 12584-1999 |
氧氣切割,激光束切割和等離子切割的不均勻性.專業術語 |
(Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts - Terminology; Trilingual version EN 12584:1999) |
| DIN EN 12585-1999 |
玻璃裝置,管道和管件.DN15至DN1000的管道和管件.可連接性和可互換性 |
(Glass plant, pipeline and fittings - Pipeline and fittings DN 15 to DN 1000 - Compatibility and interchangeability; German version EN 12585:1998) |
| DIN EN 12586-2002 |
兒童護理用品.安慰奶嘴.安全要求和試驗方法 |
(Child care articles - Soother holder - Safety requirements and test methods; German version EN 12586:1999 + AC:2002) |
| DIN EN 12588-1999 |
鉛和鉛合金.建筑用軋制薄鉛板 |
(Lead and lead alloys - Rolled lead sheet for building purposes; German version EN 12588:1999) |
| DIN EN 12589-2002 |
建筑物的通風.空調終端設備.恒速和變速終端設備的空氣動力學試驗和額定值 |
(Ventilation for buildings - Air terminal units - Aerodynamic testing and rating of constant and variable rate terminal units; German version EN 12589:2001) |
| DIN EN 12590-1999 |
紡織材料.全部或部分由合成纖維制成的工業縫紉線 |
(Textiles - Industrial sewing threads made wholly or partly from synthetic fibres; German version EN 12590:1999) |
| DIN EN 12591-2000 |
瀝青和瀝青粘合劑.鋪路級瀝青規范 |
(Bitumen and bituminous binders - Specifications for paving grade bitumen; German version EN 12591:1999) |
| DIN EN 12592-2000 |
瀝青和瀝青膠粘劑.溶解度的測定 |
(Bitumen and bituminous binders - Determination of solubility; German version EN 12592:1999) |
| DIN EN 12593-2000 |
瀝青和瀝青粘合劑.法式斷裂點的測定 |
(Bitumen and bituminous binders - Determination of Fraass breaking point; German version EN 12593:1999) |
| DIN EN 12594-2000 |
瀝青和瀝青粘合劑.試樣的制備 |
(Bitumen and bituminous binders - Preparation of test samples; German version EN 12594:1999) |
| DIN EN 12595-2000 |
瀝青和瀝青粘合劑.運動粘度的測定 |
(Bitumen and bituminous binders - Determination of kinematic viscosity; German version EN 12595:1999) |
| DIN EN 12596-2000 |
瀝青和瀝青粘合劑.用真空毛細管測定動力粘度 |
(Bitumen and bituminous binders - Determination of dynamic viscosity by vacuum capillary; German version EN 12596:1999) |
| DIN EN 12597-2001 |
瀝青和瀝青粘合劑.術語.三種語言版本EN12597:2000 |
(Bitumen and bituminous binders - Terminology; Trilingual version EN 12597:2000) |
| DIN EN 12598-1999 |
病人呼吸的混合氣體用氧氣監測儀.特殊規定 |
(Oxygen monitors for patient breathing mixtures - Particular requirements; German version EN 12598:1999) |
| DIN EN 12599-2000 |
建筑物通風.已安裝的通風和空調系統交付使用的試驗程序和測量方法 |
(Ventilation for buildings - Test procedures and measuring methods for handing over installed ventilation and air conditioning systems; German version EN 12599:2000) |
| DIN EN 126-1995 |
燃?xì)庠O(shè)備用多功能控制裝置 |
(Multifunctional controls for gas burning appliances; German version EN 126:1995) |
| DIN EN 126-2004 |
燃?xì)庠O(shè)備用多功能控制裝置 |
|
| DIN EN 12600-2003 |
建筑玻璃.擺錘式試驗.沖擊試驗方法和平面玻璃分類 |
(Glass in building - Pendulum tests - Impact test method and classification for flat glass; German version EN 12600:2002) |
| DIN EN 12601-2001 |
往復式內燃機驅動發電組.安全 |
(Reciprocating internal combustion engine driven generating sets - Safety; German version EN 12601:2001) |
| DIN EN 12603-2003 |
建筑玻璃.魏布爾分布玻璃強度數據用置信區間和適配性規程 |
(Glass in building - Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data; German version EN 12603:2002) |
| DIN EN 12604-2000 |
工業、商用和車庫的門.機械方面的要求 |
(Industrial, commercial and garage doors and gates - Mechanical aspects - Requirements; German version EN 12604:2000) |
| DIN EN 12605-2000 |
工業、商用和車庫的門.機械方面的試驗方法 |
(Industrial, commercial and garage doors and gates - Mechanical aspects - Test methods; German version EN 12605:2000) |
| DIN EN 12606-1-2000 |
瀝青和瀝青粘合劑.石蠟含量的測定.第1部分:蒸餾法 |
(Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation; German version EN 12606-1:1999) |
| DIN EN 12606-2-2000 |
瀝青和瀝青粘合劑.石蠟含量的測定.第2部分:萃取法 |
(Bitumen and bituminous binders - Determination of the paraffin wax content - Part 2: Method by extraction; German version EN 12606-2:1999) |
| DIN EN 12607-1-2000 |
瀝青和瀝青粘合劑.熱和空氣影響下抗硬化性的測定.第1部分:RTFOT法 |
(Bitumen and bituminous binders - Determination of the resistance to hardening under influence of heat and air - Part 1: RTFOT method; German version EN 12607-1:1999) |
| DIN EN 12607-2-2000 |
瀝青和瀝青粘合劑.熱和空氣影響下抗硬化性的測定.第2部分:TFOT法 |
(Bitumen and bituminous binders - Determination of the resistance to hardening under influence of heat and air - Part 2: TFOT method; German version EN 12607-2:1999) |
| DIN EN 12607-3-2000 |
瀝青和瀝青粘合劑.熱和空氣影響下抗硬化性的測定.第3部分:RFT法 |
(Bitumen and bituminous binders - Determination of the resistance to hardening under influence of heat and air - Part 3: RFT method; German version EN 12607-3:1999) |
| DIN EN 12608-2003 |
門窗制造用未增塑聚氯乙烯(PVC-U)型材.分類、要求和試驗方法 |
(Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods; German version EN 12608:2003) |
| DIN EN 12613-2001 |
地下電纜和管線的用具有視覺特性的塑料報警裝置 |
(Plastics warning devices with visual characteristics for underground cables and pipelines; German version EN 12613:2001) |
| DIN EN 12614-2005 |
混凝土結構物的防護和修理用產品和系統.試驗方法.聚合物玻璃化轉變溫度的測定 |
|
| DIN EN 12615-1999 |
混凝土構件的防護和維修用產品和系統.試驗方法.斜向剪切強度的測定 |
(Products and systems for the protection and repair of concrete structures - Test methods - Determination of slant shear strength; German version EN 12615:1999) |
| DIN EN 12616-2003 |
運動場表面.水滲透率的測定 |
(Surfaces for sports areas - Determination of water infiltration rate; German version EN 12616:2003) |
| DIN EN 12617-2-2004 |
混凝土構件的保護和維修用產品和系統.試驗方法.第2部分:基于高聚物粘合劑的裂縫注入產品的收縮率 |
|
| DIN EN 12617-3-2002 |
混凝土構件的防護和維修用產品和系統.試驗方法.第3部分:結構粘合劑早期壽命的線性收縮率的測定 |
(Products and systems for the protection and repair of concrete structures - Test methods - Part 3: Determination of early age linear shrinkage for structural bonding agents; German version EN 12617-3:2002) |
| DIN EN 12617-4-2002 |
混凝土構件的防護和維修用產品和系統.試驗方法.第4部分:收縮率和膨脹率的測定 |
(Products and systems for the protection and repair of concrete structures - Test methods - Part 4: Determination of shrinkage and expansion; German version EN 12617-4:2002) |
| DIN EN 12618-2-2004 |
混凝土結構的保護和維修用產品和系統.試驗方法.第2部分:帶或不帶熱循環的注入產品的粘性測定.抗拉粘結強度測定粘性 |
|
| DIN EN 12618-3-2004 |
混凝土結構的保護和維修用產品和系統.試驗方法.第3部分:帶或不帶熱循環的注入產品的粘性測定.傾斜剪切法 |
|
| DIN EN 12619-1999 |
固定源排放.測定廢氣中低濃度全部氣態有機碳的質量濃度.使用火焰電離探測器的連續法 |
(Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon at low concentrations in flue gases - Continuous flame ionisation detector method; German version EN 12619:1999) |
| DIN EN 1262-1996 |
表面活化劑.表面活化溶液或消散劑的pH值測量 |
(Surface active agents - Determination of the pH value of surfactant solutions or dispersions; German version EN 1262:1996) |
| DIN EN 1262-2004 |
表面活性劑.溶液或分散劑的pH值測定 |
(Surface active agents - Determination of pH value of solutions or dispersions; German version EN 1262:2003) |
| DIN EN 1262-2004 |
表面活性劑.溶液或分散劑的pH值測定 |
|
| DIN EN 12620 Berichtigung 1-2004 |
對DIN EN 12620-2003的勘誤 |
|
| DIN EN 12620-2003 |
混凝土用集料 |
(Aggregates for concrete; German version EN 12620:2002) |
| DIN EN 12622-2001 |
機床.機床的安全.水力壓彎機 |
(Machine tools - Safety of machine tools - Hydraulic press brakes; German version EN 12622:2001) |
| DIN EN 12625-3-1999 |
薄紙和薄紙產品.第3部分:堆垛和表面上的堆垛密度中厚度和片厚的測定 |
(Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness and apparent bulk density; German version EN 12625-3:1999) |
| DIN EN 12625-4-1999 |
薄紙和薄紙產品.第4部分:抗拉強度,斷裂伸長和抗拉能力吸收的測定 |
(Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at break and tensile energy absorption; German version EN 12625-4:1999) |
| DIN EN 12625-5-1999 |
薄紙和薄紙產品.第5部分:潮濕抗拉強度的測定 |
(Tissue paper and tissue products - Part 5: Determination of wet tensile strength; German version EN 12625-5:1999) |
| DIN EN 12625-6-1999 |
薄紙和薄紙產品.第6部分:單位面積質量測定 |
(Tissue paper and tissue products - Part 6: Determination of grammage; German version EN 12625-6:1999) |
| DIN EN 12625-7-2000 |
薄紙和薄紙產品.第7部分:光學性能的測定 |
(Tissue paper and tissue products - Part 7: Determination of optical properties; German version EN 12625-7:2000) |
| DIN EN 12626-1997 |
機械裝置的安全.激光加工機械.安全要求 |
(Safety of machinery - Laser processing machines - Safety requirements (ISO 11553:1996 modified); German version EN 12626:1997) |
| DIN EN 12627-1999 |
工業閥門.鋼閥門的焊接端部 |
(Industrial valves - Butt welding ends for steel valves; German version EN 12627:1999) |
| DIN EN 12628-1999 |
潛水裝置附件.組合浮力及救生設備.功能和安全技術要求.檢驗方法 |
(Diving accessories - Combined buoyancy and rescue devices - Functional and safety requirements, test methods; German version EN 12628:1999) |
| DIN EN 12629-1-2001 |
生產混凝土和硅酸鹽建筑產品用機器.安全.第1部分:普通要求 |
(Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 1: Common requirements; German version EN 12629-1:2000) |
| DIN EN 12629-2-2003 |
生產混凝土和硅酸鈣建筑產品的設備.安全.第2部分:制塊機 |
(Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 2: Block making machines; German version EN 12629-2:2002) |
| DIN EN 12629-3-2003 |
用混凝土和硅酸鈣制造建筑產品的設備.安全.第3部分:滑動和轉盤機 |
(Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 3: Slide and turntable machines; German version EN 12629-3:2002) |
| DIN EN 12629-4-2001 |
由混凝土和硅酸鈣鹽生產的構架產品生產機械.安全性.第4部分:屋頂瓦加工機 |
(Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 4: Concrete roof tile making machines; German version EN 12629-4:2001) |
| DIN EN 12629-5-1-2004 |
生產混凝土和硅酸鹽建筑產品用機器.安全.第5-1部分:垂直軸的管道制造機械 |
|
| DIN EN 12629-5-2-2004 |
生產混凝土和硅酸鹽建筑產品用機器.安全.第5-2部分:水平軸的管道制造機械 |
|
| DIN EN 12629-5-3-2004 |
生產混凝土和硅酸鹽建筑產品用機器.安全.第5-3部分:管道預加應力機械 |
|
| DIN EN 12629-5-4-2004 |
生產混凝土和硅酸鹽建筑產品用機器.安全.第5-4部分:混凝土管道涂層機械 |
|
| DIN EN 12629-7-2004 |
生產混凝土和硅酸鹽建筑產品用機器.安全.第7部分:預應力產品的長線生產用固定和移動設備 |
|
| DIN EN 12629-8-2003 |
混凝土和硅酸鹽建筑產品用生產機器.安全.第8部分:硅酸鹽(和混凝土)建筑產品用生產機器和設備 |
(Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 8: Machines and equipment for the manufacture of constructional products from calcium-silicate (and concrete); German version EN 12629-8:2002) |
| DIN EN 1263-1-2002 |
安全網絡.第1部份:安全技術要求.試驗方法 |
(Safety nets - Part 1: Safety requirements, test methods; German version EN 1263-1:2002) |
| DIN EN 1263-2-2002 |
安全網絡.第2部分:定位限制網絡用安全技術要求 |
(Safety nets - Part 2: Safety requirements for the positioning limits; German version EN 1263-2:2002) |
| DIN EN 12630-1999 |
果汁和蔬菜汁.葡萄糖,果糖,山梨醇和蔗糖的含量.高效液體色譜法 |
(Fruit and vegetable juices - Determination of glucose, fructose, sorbitol and sucrose contents - Method using high performance liquid chromatography; German version EN 12630:1999) |
| DIN EN 12631-1999 |
果汁和蔬菜汁.D型和L型乳酸(哺乳)中含量的酶測定.NAD的分光光度測定 |
(Fruit and vegetable juices - Enzymatic determination of D- and L-lactic acid (lactate) content - NAD spectrometric method; German version EN 12631:1999) |
| DIN EN 12632-1999 |
果汁和蔬菜汁.醋酸(醋酸鹽)中含量的酶測定.NAD的分光光度測定 |
(Fruit and vegetable juices - Enzymatic determination of acetic acid (acetate) content - NAD spectrometric method; German version EN 12632:1999) |
| DIN EN 12634-1999 |
礦物油制品和潤滑材料.酸值測定.無水介質中的電位滴定分析法 |
(Petroleum products and lubricants - Determination of acid number - Non-aqueous potentiometric titration method; German version EN 12634:1998) |
| DIN EN 12635-2002 |
工業、商業和車用門.安裝和使用 |
(Industrial, commercial and garage doors and gates - Installation and use; German version EN 12635:2002) |
| DIN EN 12636-1999 |
混凝土支撐結構的防護和維修用產品和系統.檢驗方法.混凝土膠粘性的測定 |
(Products and systems for the protection and repair of concrete structures - Test methods - Determination of the adhesion conrete to concrete; German version EN 12636:1999) |
| DIN EN 12637-1-2004 |
混凝土結構的保護和維修用產品和系統.試驗方法.注入產品的兼容性.第1部分:與混凝土的兼容性 |
|
| DIN EN 12637-3-2004 |
混凝土結構的保護和維修用產品和系統.試驗方法.注入產品的可混用性.第3部分:注入產品對彈性體的影響 |
|
| DIN EN 12639-2000 |
液體泵和泵部件.噪音試驗代碼.精確性2級和3級 |
(Liquid pumps and pump units - Noise test code - Grade 2 and 3 of accuracy; German version EN 12639:2000) |
| DIN EN 1264-1-1997 |
地板供暖.系統和部件.第1部分:定義和符號 |
(Floor heating - Systems and components - Part 1: Definitions and symbols; German version EN 1264-1:1997) |
| DIN EN 1264-2-1997 |
地板供暖.系統和部件.第2部分:熱輸出量的測定 |
(Floor heating - Systems and components - Part 2: Determination of the thermal output; German version EN 1264-2:1997) |
| DIN EN 1264-3-1997 |
地板供暖.系統和部件.第3部分:計算 |
(Floor heating - Systems and components - Part 3: Dimensioning; German version EN 1264-3:1997) |
| DIN EN 1264-4-2001 |
地板供暖.系統和部件.第4部分:安裝 |
(Floor heating - Systems and components - Part 4: Installation; German version EN 1264-4:2001) |
| DIN EN 12640-2001 |
道路車輛上貨物的安全性.貨物運輸用商用車系綁點.最低要求和試驗 |
(Securing of cargo on road vehicles - Lashing points on commerical vehicles for goods transportation - Minimum requirements and testing; German version EN 12640:2000) |
| DIN EN 12641-1-2000 |
交換部件.油布.第1部分:最低要求 |
(Swap bodies - Tarpaulines - Part 1: Minimum requirements; German version EN 12641-1:2000) |
| DIN EN 12641-1-2005 |
可換式車箱和商用車輛.防水油布.第1部分:最低要求 |
|
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com