標準號 |
中文名稱 |
英文名稱 |
| DIN EN 12479-2002 |
架空線用木桿.尺寸.測量方法和極限偏差 |
(Wood poles for overhead lines - Sizes - Methods of measurements and limit deviations; German version EN 12479:2001) |
| DIN EN 1248-2002 |
鑄造機械.噴砂設備的安全要求 |
(Foundry machinery - Safety requirements for abrasive blasting equipment; German version EN 1248:2001) |
| DIN EN 12480-2002 |
煤氣表.旋轉位移式煤氣表 |
(Gas meters - Rotary displacement gas meters; German version EN 12480:2002) |
| DIN EN 12481-2001 |
自粘帶.術語 |
(Self adhesive tapes - Terminology; German version EN 12481:2000) |
| DIN EN 12482-1-1998 |
鋁和鋁合金.通用粗軋帶材.第1部分:熱軋粗軋帶材的規范 |
(Aluminium and aluminium alloys - Reroll stock for general applications - Part 1: Specifications for hot rolled reroll stock; German version EN 12482-1:1998) |
| DIN EN 12482-2-1998 |
鋁和鋁合金.通用粗軋帶材.第2部分:冷軋粗軋帶材的規范 |
(Aluminium and aluminium alloys - Reroll stock for general applications - Part 2: Specifications for cold rolled reroll stock; German version EN 12482-2:1998) |
| DIN EN 12483-1999 |
液泵.帶頻率變換器的甭組件.保證試驗和相容性試驗 |
(Liquid pumps - Pump units with frequency inverters - Guarantee and compatibility tests; German version EN 12483:1999) |
| DIN EN 12484-1-1999 |
灌溉方法.自動草坪灌溉系統.第1部分:由所有者確定設備和任務 |
(Irrigation techniques - Automatic turf irrigation systems - Part 1: Definition of the programme of equipment of the owner; German version EN 12484-1:1999) |
| DIN EN 12484-2-2000 |
灌溉技術.自動草坪灌溉系統.第2部分:典型技術模板的設計和定義 |
(Irrigation techniques - Automatic turf irrigation systems - Part 2: Design and definition of typical technical templates; German version EN 12484-2:2000) |
| DIN EN 12484-3-2000 |
灌溉技術.自動草坪灌溉系統.第3部分:自動控制和系統管理 |
(Irrigation techniques - Automatic turf irrigation systems - Part 3: Automatic control and system management; German version EN 12484-3:2000) |
| DIN EN 12484-4-2003 |
灌溉技術.自動草坪灌溉系統.第4部分:安裝和驗收 |
(Irrigation techniques - Automatic turf irrigation systems - Part 4: Installation and acceptance; German version EN 12484-4:2002) |
| DIN EN 12484-5-2002 |
灌溉技術.自動草坪灌溉系統.第5部分:系統的試驗方法 |
(Irrigation techniques - Automatic turf irrigation systems - Part 5: Testing methods of systems; German version EN 12484-5:2002) |
| DIN EN 12485-2001 |
飲用水處理用化學品.碳酸鈣、高生石灰和半煅燒白云石.試驗方法 |
(Chemicals used for treatment of water intended for human consumption - Calcium carbonate, high-calcium lime and half-burnt dolomite - Test methods; German version EN 12485:2001) |
| DIN EN 12487-2000 |
金屬的腐蝕防護.經清洗和沒有清洗的鋁及鋁合金上的鉻酸鹽轉化涂層 |
(Corrosion protection of metals - Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys; German version EN 12487:2000) |
| DIN EN 12489-2000 |
工業、商業用汽車庫門.耐水滲透特性.試驗方法 |
(Industrial, commercial and garage doors and gates - Resistance to water penetration - Test methods; German version EN 12489:2000) |
| DIN EN 12490-1999 |
木材和復合木材制品的耐久性.用木材防護劑處理過的實木.處理過的木材中瀝青浸漬油的滲入厚度和吸收的測定 |
(Durability of wood and wood-based products - Preservative-treated solid wood - Determination of the penetration and retention of creosote in treated wood; German version EN 12490:1998) |
| DIN EN 12491-2001 |
降落滑翔設備.緊急降落傘.安全要求和試驗方法 |
(Paragliders equipment - Emergency parachutes - Safety requirements and test methods; German version EN 12491:2001) |
| DIN EN 12492-2003 |
登山設備.登山運動員用的防護帽.安全要求和試驗方法(包括修改A1:2002) |
(Mountaineering equipment - Helmets for mountaineers - Safety requirements and test methods (includes Amendment A1:2002); German version EN 12492:2000 + A1:2002) |
| DIN EN 12493-2001 |
液化石油氣(LPG)用焊接鋼罐.槽罐車.設計和生產 |
(Welded steel tanks for liquefied petroleum gas (LPG) - Road tankers - Design and manufacture; German version EN 12493:2001) |
| DIN EN 12495-2000 |
固定鋼近海結構的陰極保護 |
(Cathodic protection for fixed steel offshore structures; German version EN 12495:2000) |
| DIN EN 12498-2005 |
紙和紙板.與食物接觸的紙和紙板.水萃取物中鎘和鉛含量的測定 |
|
| DIN EN 12499-2003 |
金屬結構的內部陰極保護 |
(Internal cathodic protection of metallic structures; German version EN 12499:2003) |
| DIN EN 125-1996 |
煤氣設備的火焰監控裝置.熱電點火安全裝置 |
(Flame supervision devices for gas burning appliances - Thermo-electric flame supervision devices; German version EN 125:1991 + A1:1996) |
| DIN EN 12500-2000 |
金屬材料的防腐蝕.大氣環境下的腐蝕概率.大氣環境腐蝕性的分類、測定和評估 |
(Protection of metallic materials against corrosion - Corrosion likelihood in atmospheric environment - Classification, determination and estimation of corrosivity of atmospheric environments; German version EN 12500:2000) |
| DIN EN 125000-1998 |
總規范.鐵氧體鐵芯 |
(Generic specification - Cores made of ferrite materials; German version EN 125000:1997) |
| DIN EN 12501-1-2003 |
金屬材料防腐措施.土壤中腐蝕可能性.第1部分:總則 |
(Protection of metallic materials against corrosion - Corrosion likelihood in soil - Part 1: General; German version EN 12501-1:2003) |
| DIN EN 12501-2-2003 |
金屬材料防腐措施.土壤中腐蝕可能性.第2部分:低合金和非合金黑色金屬材料 |
(Protection of metallic materials against corrosion - Corrosion likelihood in soil - Part 2: Low alloyed and non alloyed ferrous materials; German version EN 12501-2:2003) |
| DIN EN 12503 Bb.1-2003 |
體育運動用墊子.認證 |
(Sports mats - Certification) |
| DIN EN 12503-1-2003 |
運動墊.第1部分:體操運動墊.安全要求 |
(Sports mats - Part 1: Gymnastic mats, safety requirements (includes Corrigendum AC:2002); German version EN 12503-1:2001 + AC:2002) |
| DIN EN 12503-2-2003 |
運動墊.第2部分:撐桿跳和跳高墊.安全要求 |
(Sports mats - Part 2: Pole vault and high jump mats, safety requirements (includes Corrigendum AC:2002); German version EN 12503-2:2001 + AC:2002) |
| DIN EN 12503-3-2001 |
運動墊.第3部分:柔道墊.安全要求 |
(Sports mats - Part 3: Judo mats; Safety requirements; German version EN 12503-3:2001) |
| DIN EN 12503-4-2001 |
運動墊.第4部分:減震的測定 |
(Sport mats - Part 4: Determination of shock absorption; German version EN 12503-4:2001) |
| DIN EN 12503-5-2001 |
運動墊.第5部分:基本摩擦的測定 |
(Sport mats - Part 5: Determination of the base friction; German version EN 12503-5:2001) |
| DIN EN 12503-6-2001 |
運動墊.第6部分:頂摩擦的測定 |
(Sports mats - Part 6: Determination of the top friction; German version EN 12503-6:2001) |
| DIN EN 12503-7-2001 |
運動墊.第7部分:靜態硬挺度的測定 |
(Sports mats - Part 7: Determination of static stiffness; German version EN 12503-7:2001) |
| DIN EN 12504-1-2000 |
結構中的混凝土試驗.第1部分:起棱紋的試樣.取樣、檢查和壓縮試驗 |
(Testing concrete in structures - Part 1: Cored specimens; taking, examining, and testing in compression; German version EN 12504-1:2000) |
| DIN EN 12504-2-2001 |
結構中的混凝土試驗.第2部分:無損檢驗.回彈數的測定 |
(Testing concrete in structures - Part 2: Non-destructive testing - Determination of rebound number; German version EN 12504-2:2001) |
| DIN EN 12504-4-2004 |
結構中的混凝土試驗.第4部分:超音波脈沖速率的測定 |
|
| DIN EN 12505-2001 |
食品加工機械.加工食用油脂用的離心機.安全和衛生要求 |
(Food processing machinery - Centrifugal machines for processing edible oils and fats - Safety and hygiene requirements; German version EN 12505:2000) |
| DIN EN 12506-2003 |
廢物表征.提取物的分析.pH值、As、Ba、Cd、CI、Co、Cr、Cr(VI)、Cu、Mo、Ni、NO、Pb、硫總量、SO2、V和Zn含 |
(Characterization of waste - Analysis of eluates - Determination of pH, As, Ba, Cd, CI, Co, Cr, Cr(VI), Cu, Mo, Ni, NO, Pb, total S, SO2, V and Zn; German version EN 12506:2003) |
| DIN EN 12507-1999 |
運輸業.道路運輸、存儲和和配售業的ENISO9002使用指南 |
(Transport services - Guidance notes on the application of EN ISO 9002 to the road transportation, storage and distribution industries; German version EN 12507:1999) |
| DIN EN 12507-2005 |
運輸業務.EN ISO9002-2000在道路運輸、儲存、配送和鐵路貨運業的應用指南 |
|
| DIN EN 12508 Berichtigung 1-2001 |
DINEN12508:2000-09的勘誤 |
(Corrigendum to DIN EN 12508:2000-09) |
| DIN EN 12508-2000 |
金屬和合金的防腐保護.金屬和其它有機涂層的表面處理.詞匯 |
(Corrosion protection of metals and alloys - Surface treatment, metallic and other non-organic coatings - Vocabulary; German version EN 12508:2000) |
| DIN EN 12509-2002 |
架空線用木桿的試驗方法.測定彈性模量、粘結強度、密度和含水量的試驗方法 |
(Timber poles for overhead lines - Test methods - Determination of modulus of elasticity, bending strength, density and moisture content; German version EN 12509:2001) |
| DIN EN 1251-1-2000 |
低溫容器.容量不超過1000升的可移動的真空絕緣容器.第1部分:基本要求.德文版本EN1251-1:2000 |
(Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 1: Fundamental requirements; German version EN 1251-1:2000) |
| DIN EN 1251-2-2000 |
低溫容器.容量不超過1000升的可移動的真空絕緣容器.第2部分:設計,構造,檢驗和試驗.德文版本EN1251-2:2000 |
(Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 2: Design, fabrication, inspection and testing; German version EN 1251-2:2000) |
| DIN EN 1251-3-2000 |
低溫容器.容量不超過1000升的可移動的真空絕緣容器.第3部分:操作要求.德文版本EN1251-3:2000 |
(Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 3: Operational requirements; German version EN 1251-3:2000) |
| DIN EN 12510-2002 |
架空線用木桿.強度分級標準 |
(Wood poles for overhead lines - Strength grading criteria; German version EN 12510:2001 + AC:2002) |
| DIN EN 125100-1993 |
分規范.電感線圈中的磁氧體鐵芯 |
(Sectional specification: magnetic oxide cores for inductor applications; german version EN 125100:1991) |
| DIN EN 12511-2002 |
架空線用木桿.特征值的測定 |
(Wood poles for overhead lines - Determination of characteristic values; German version EN 12511:2001) |
| DIN EN 12512-2002 |
木結構.試驗方法.機械緊固件接頭的循環試驗 |
(Timber structures - Test methods - Cyclic testing of joints made with mechanical fasteners; German version EN 12512:2001) |
| DIN EN 12512-2005 |
木結構.試驗方法.機械緊固件接頭的循環試驗 |
|
| DIN EN 12513-2001 |
鑄造.耐磨鑄鐵 |
(Founding - Abrasion resistant cast irons; German version EN 12513:2000) |
| DIN EN 12514-1-2000 |
油燃燒器供油系統的安裝.第1部分:安全要求和試驗.部件,供油泵.控制和安全裝置.供油罐 |
(Installations for oil supply systems for oil burners - Part 1: Safety requirements and tests; parts, oil feed pumps, control and safety devices, supply tanks; German version EN 12514-1:2000) |
| DIN EN 12514-2-2000 |
油燃燒器供油系統的安裝.第1部分:安全要求和試驗.部件,閥門管道,過濾器,油空氣分離器,油量計 |
(Installations for oil supply systems for oil burners - Part 2: Safety requirements and tests; parts, valves pipes, filters, oil de-aerators, meters; German version EN 12514-2:2000) |
| DIN EN 12515-1997 |
熱環境.利用要求濕度的計算對熱應力進行分析測定和評估 |
(Hot environments - Analytical determination and interpretation of thermal stress using calculation of required sweat rate (ISO 7933:1989, modified); German version EN 12515:1997) |
| DIN EN 12516-2-2004 |
工業用閥.外殼設計強度.第2部分:鋼閥外殼的計算方法 |
|
| DIN EN 12516-3-2003 |
閥門.外殼設計強度.第3部分:實驗方法 |
(Valves - Shell design strength - Part 3: Experimental method; German version EN 12516-3:2002) |
| DIN EN 12517-2003 |
焊縫的無損檢驗.焊接接頭的X光透視檢驗.允許極限值 |
(Non-destructive examination of welds - Radiographic testing of welded joints - Acceptance levels; German version EN 12517:1998 + A1:2002) |
| DIN EN 12518-2000 |
人類飲用水處理用化學試劑.高鈣石灰 |
(Chemicals used for treatment of water intended for human consumption - High-calcium lime; German version EN 12518:2000) |
| DIN EN 12519-2004 |
窗戶和行人用門.術語 |
|
| DIN EN 1252-1 Berichtigung 1-1999 |
對DINEN1252-1:1998-05的校正 |
(Corrigenda to DIN EN 1252-1:1998-05 (EN 1252-1:1998/AC:1998)) |
| DIN EN 1252-1-1998 |
低溫容器.材料.第1部分:溫度為-80℃以下對粘度的要求 |
(Cryogenic vessels - Materials - Part 1: Toughness requirements for temperatures below80C; German version EN 1252-1:1998) |
| DIN EN 1252-2-2001 |
深冷容器.材料.第2部分:溫度在攝氏-80度和-20度之間的韌性要求.德文版EN1252-2-2001 |
(Cryogenic vessels - Materials - Part 2: Toughness requirements for temperatures between -80 鳦 and -20 鳦; German version EN 1252-2:2001) |
| DIN EN 125200-1993 |
分規范.線性變壓器用磁氧體鐵芯 |
(Sectional specification: magnetic oxide cores for linear transformers; german version EN 125200:1991) |
| DIN EN 12522-1-1998 |
搬家服務.私人搬家.第1部分:服務規范 |
(Furniture removal activities - Furniture removal for private individuals - Part 1: Service specification; German version EN 12522-1:1998) |
| DIN EN 12522-2-1998 |
搬家服務.私人搬家.第2部分:服務準備 |
(Furniture removal activities - Furniture removal for private individuals - Part 2: Provision of service; German version EN 12522-2:1996) |
| DIN EN 12523-1999 |
外側四肢假肢和外側矯形假肢.要求和檢驗方法 |
(External limb prostheses and external orthoses - Requirements and test methods; German version EN 12523:1999) |
| DIN EN 12524-2000 |
建筑材料和產品.水熱性能.表列設計值 |
(Building materials and products - Hygrothermal properties - Tabulated design values; German version EN 12524:2000) |
| DIN EN 12525-2000 |
農業機械.前端裝載機.安全;德文版本EN12525:2000 |
(Agricultural machinery - Front loaders - Safety; German version EN 12525:2000) |
| DIN EN 12526-1999 |
腳輪和輪子.詞匯,建議用符號和多語種詞表 |
(Castors and wheels - Vocabulary, recommended symbols and multilingual dictionary; German version EN 12526:1998) |
| DIN EN 12527-1999 |
腳輪和輪子.檢驗方法和檢驗設備 |
(Castors and wheels - Test methods and apparatus; German version EN 12527:1998) |
| DIN EN 12528-1999 |
腳輪和輪子.家具用腳輪.要求 |
(Castors and wheels - Castors for furniture - Requirements; German version EN 12528:1998) |
| DIN EN 12529-1999 |
腳輪和輪子.家具用腳輪.轉椅用腳輪.要求 |
(Castors and wheels - Castors for furniture - Castors for swivel chairs - Requirements; German version EN 12529:1998) |
| DIN EN 1253-1-1999 |
建筑物的排污道.第1部分;要求 |
(Gullies for buildings - Part 1: Requirements; German version EN 1253-1:1999) |
| DIN EN 1253-2-1999 |
建筑物的排污道.第2部分:試驗方法 |
(Gullies for buildings - Part 2: Test methods; German version EN 1253-2:1998) |
| DIN EN 1253-2-2004 |
建筑物的集水溝.第2部分:試驗方法 |
|
| DIN EN 1253-3-1999 |
建筑物的排污道.第3部分:質量控制 |
(Gullies for buildings - Part 3: Quality control; German version EN 1253-3:1999) |
| DIN EN 1253-4-2000 |
建筑物的排污道.第4部分:入口封蓋物 |
(Gullies for buildings - Part 4: Access covers; German version EN 1253-4:1999) |
| DIN EN 1253-5-2004 |
建筑物用集水溝.第5部分:可截流輕液體的集水溝 |
|
| DIN EN 12530-1999 |
腳輪和輪子.器具的輪子.手動操作的腳輪和輪子 |
(Castors and wheels - Castors and wheels for manually propelled institutional applications; German version EN 12530:1998) |
| DIN EN 12531-1999 |
腳輪和輪子.病床用腳輪 |
(Castors and wheels - Hospital bed castors; German version EN 12531:1998) |
| DIN EN 12532-1999 |
腳輪和輪子.速度在1,1米/秒(4公里/小時)以下的運輸裝置用輪子 |
(Castors and wheels - Castors and wheels for applications up to 1,1 m/s (4 km/h); German version EN 12532:1998) |
| DIN EN 12533-1999 |
腳輪和輪子.速度在1,1米/秒(4公里/小時)以上,4,4米/秒(16公里/小時)以下的重負載輪子 |
(Castors and wheels - Castors and wheels for applications over 1,1 m/s (4 km/h) and up to 4,4 m/s (16 km/h); German version EN 12533:1998) |
| DIN EN 12534-1999 |
焊料.高強度鋼的氣體保護金屬極電弧焊接用焊絲電極、焊絲、焊條和沉積金屬.分類 |
(Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded metal arc welding of high strength steels - Classification; German version EN 12534:1999) |
| DIN EN 12535-2000 |
焊接材料.高強度鋼的氣體保護金屬電弧焊接用管狀芯電極.分類 |
(Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of high strength steels - Classification; German version EN 12535:2000) |
| DIN EN 12536-2000 |
焊料.非合金鋼和抗蠕變鋼的氣體焊接用焊條.分類 |
(Welding consumables - Rods for gas welding of non alloy and creep-resisting steels - Classification; German version EN 12536:2000) |
| DIN EN 1254-1-1998 |
銅和銅合金.管配件.第1部分:銅管用毛細釬焊管件(軟釬焊和硬釬焊) |
(Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes; German version EN 1254-1:1998) |
| DIN EN 1254-2-1998 |
銅和銅合金.管配件.第2部分:銅管用夾緊連接 |
(Copper and copper alloys - Plumbing fittings - Part 2: Fittings with compression ends for use with copper tubes; German version EN 1254-2:1998) |
| DIN EN 1254-3-1998 |
銅和銅合金.管配件.第3部分:塑料管用夾緊連接 |
(Copper and copper alloys - Plumbing fittings - Part 3: Fittings with compression ends for use with plastics pipes; German version EN 1254-3:1998) |
| DIN EN 1254-4 Berichtigung 1-2000 |
DINEN1254-4-1998的勘誤 |
(Corrigenda to DIN EN 1254-4:1998-03 (EN 1254-4:1998/AC:1999)) |
| DIN EN 1254-4-1998 |
銅和銅合金.管配件.第4部分:毛細釬焊連接或夾緊連接端頭與其它結構相連用管件 |
(Copper and copper alloys - Plumbing fittings - Part 4: Fittings combining other end connections with capillary or compression ends; German version EN 1254-4:1998) |
| DIN EN 1254-5-1998 |
銅和銅合金.管配件.第5部分:用毛細硬釬焊連接銅管用帶小端頭插件的管件 |
(Copper and copper alloys - Plumbing fittings - Part 5: Fittings with short ends for capillary brazing to copper tubes; German version EN 1254-5:1998) |
| DIN EN 12540-2000 |
金屬的腐蝕防護.鎳、鎳加鉻、銅加鎳和銅加鎳加鉻的電解鍍層 |
(Corrosion protection of metals - Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and copper plus nickel plus chromium; German version EN 12540:2000) |
| DIN EN 125400-1993 |
分規范.線圈和調諧變壓器中的磁氧體鐵芯 |
(Sectional specification: adjusters used with magnetic oxide cores for use in inductors and tuned transformers; german version EN 125400:1991) |
| DIN EN 125401-1993 |
空白詳細規范.線圈和調諧變壓器中磁氧體鐵芯的調整器 |
(Blank detail specification: adjusters used with magnetic oxide (ferrite) cores for use in inductors and tuned transformers; german version EN 125401:1991) |
| DIN EN 12541-2003 |
衛生便池.壓力沖洗閥和自動關閉便池沖水閥 |
(Sanitary tapware - Pressure flushing valves and automatic closing urinal valves PN 10; German version EN 12541:2002) |
| DIN EN 12542-2002 |
安裝在地面上的儲存容量不超過13M的系列生產的液化石油氣儲存用固定焊接的圓柱型鋼罐.設計和制造 |
(Static welded steel cylindrical tanks, serially produced for the storage of liquefied petroleum gas (LPG) having a volume not greater than 13 m and for installation above ground - Design and manufacture; German version EN 12542:2002) |
| DIN EN 12542-2005 |
的系列生產的液化石油氣儲存用固定焊接的圓柱形鋼罐.設計和制造 |
DIN EN 12542-2005 |
| DIN EN 12543-1-1999 |
無損檢驗.無損檢驗用工業X射線系統中焦點的特性.第1部分:掃描法 |
(Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 1: Scanning method; German version EN 12543-1:1999) |
| DIN EN 12543-2-1999 |
無損檢驗.無損檢驗用工業X射線系統中焦點的特性.第2部分:針孔照相機射線攝影法 |
(Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method; German version EN 12543-2:1999) |
| DIN EN 12543-3-1999 |
無損檢驗.無損檢驗用工業X射線系統中焦點的特性.第2部分:狹縫照相機射線攝影法 |
(Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 3: Slit camera radiographic method; German version EN 12543-3:1999) |
| DIN EN 12543-4-1999 |
無損檢驗.無損檢驗用工業X射線系統中焦點的特性.第4部分:邊緣法 |
(Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 4: Edge method; German version EN 12543-4:1999) |
| DIN EN 12543-5-1999 |
無損檢驗.無損檢驗用工業X射線系統中焦點的特性.第5部分:最小和最大聚焦X射線電子管的有效焦點尺寸的測量 |
(Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 5: Measurement of the effective focal spot size of mini and micro focus X-ray tubes; German version EN 12543-5:1999) |
| DIN EN 12544-1-1999 |
無損檢驗.X射線電子管電壓的測量和評估.第1部分:分壓器法 |
(Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 1: Voltage divider method; German version EN 12544-1:1999) |
| DIN EN 12544-2-2000 |
無損試驗.X射線管電壓的評估和測量.第2部分:用厚濾膜法連續檢驗.德文版本EN12544-2:2000 |
(Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 2: Constancy check by the thick filter method; German version EN 12544-2:2000) |
| DIN EN 12544-3-1999 |
無損檢驗.X射線電子管電壓的測量和評估.第2部分:光譜測定法 |
(Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 3: Spectrometric method; German version EN 12544-3:1999) |
| DIN EN 12545-2000 |
鞋靴、皮革和人造革制品生產機械.噪聲試驗規程.通用要求 |
(Footwear, leather and imitation leather goods manufacturing machines - Noise test code - Common requirements; German version EN 12545:2000) |
| DIN EN 12546-1 Berichtigung 1-2005 |
與食品接觸的材料和物品.家用保溫容器.第1部分:真空器皿、保溫瓶和保溫壺規范 |
|
| DIN EN 12546-1 Berichtigung 1-2005 |
與食品接觸的材料和物品.家用保溫容器.第1部分:真空器皿、保溫瓶和保溫壺規范 |
|
| DIN EN 12546-1-2000 |
與食品接觸的材料和物品.家用保溫容器.第1部分:真空器皿、保溫瓶和保溫壺規范 |
(Materials and articles in contact with foodstuffs - Insulated containers for domestic use - Part 1: Specification for vacuum ware, insulated flasks and jugs; German version EN 12546-1:2000) |
| DIN EN 12546-2-2000 |
與食品接觸的材料和物品.家用保溫容器.第2部分:保溫袋和保溫箱規范 |
(Materials and articles in contact with foodstuffs - Insulated containers for domestic use - Part 2: Specification for insulated bags and boxes; German version EN 12546-2:2000) |
| DIN EN 12546-3-2000 |
與食品接觸的材料和物品.家用保溫容器.第3部分:熱包裝材料規范 |
(Materials and articles in contact with foodstuffs - Insulated containers for domestic use - Part 3: Specification for thermal packs; German version EN 12546-3:2000) |
| DIN EN 12547-1999 |
離心機.一般安全要求 |
(Centrifuges - Common safety requirements; German version EN 12547:1999) |
| DIN EN 12548-1999 |
鉛及鉛合金.電纜護套和套筒用鉛合金錠 |
(Lead and lead alloys - Lead alloy ingots for electric cable sheathing and for sleeves; German version EN 12548:1999) |
| DIN EN 12549-1999 |
聲學.緊固件操縱工具的噪聲測試規范.工程法 |
(Acoustics - Noise test code for fastener driving tools - Engineering method; German version EN 12549:1999) |
| DIN EN 1255-1995 |
內河航運船只.旋臂起重機 |
(Inland navigation vessels - Swing derricks; German version EN 1255:1995) |
| DIN EN 125500-1996 |
分規范.除干擾濾波器的鐵氧體磁環芯和寬頻帶傳輸應用 |
(Sectional specification: Magnetic oxide ring cores for interference suppression and low level signal transformer applications; German version EN 125500:1996) |
| DIN EN 1256-1996 |
氣焊設備.對焊接,切割及類似作業用裝置上軟管的規定 |
(Gas welding equipment - Specification for hose assemblies for equipment for welding, cutting and allied processes; German version EN 1256:1996) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com