標準號 |
中文名稱 |
英文名稱 |
| DIN EN 636-3-1997 |
膠合板.規范.第3部分:對室外用膠合板的要求 |
(Plywood - Specifications - Part 3: Requirements for plywood for use exterior conditions; German version EN 636-3:1996) |
| DIN EN 637-1994 |
塑料.管道系統.玻璃纖維增強塑料部分.用重力測量法獲取成分含量 |
(Plastics piping systems - Glass-reinforced plastics components - Determination of the amounts of constituents using the gravimetric method; German version EN 637:1994) |
| DIN EN 639-1994 |
包括管接頭和配件的混凝土壓力管的統一要求 |
(Common requirements for concrete pressure pipes, including joints and fittings; German version EN 639:1994) |
| DIN EN 640-1994 |
包括管連接件和配件的分段加固(無外皮)的鋼筋混凝土壓力管和混凝土壓力管 |
(Reinforced concrete pressure pipes and distributed reinforcement concrete pressure pipes (non-cylinder type), including joints and fittings; German version EN 640:1994) |
| DIN EN 641-1994 |
包括管連接件和異型管件的帶薄板套的鋼筋混凝土壓力管 |
(Reinforced concrete pressure pipes, cylinder type, including joints and fittings; German version EN 641:1994) |
| DIN EN 642-1994 |
帶和不帶薄板套的預應力混凝土壓力管包括管連接件,異型件以及管用預應力鋼的特殊要求 |
(Prestressed concrete pressure pipes, cylinder and non-cylinder, including joints, fittings and specific requirement for prestressing steel for pipes; German version EN 642:1994) |
| DIN EN 643-2002 |
紙和紙板.歐洲回收紙和紙板的標準等級表 |
(Paper and board - European list of standard grades of recovered paper and board; German version EN 643:2001) |
| DIN EN 644-1999 |
紙張.紙坯形狀.基本系列和補充系列的測定.標識和公差.機器運行方向 |
(Paper - Untrimmed sizes - Primary range and supplementary range designation and tolerances, expression of direction of manufacture; German version EN 644:1999) |
| DIN EN 645-1994 |
和食品接觸的紙和紙板.冷水萃取物的制備 |
(Paper and board intended to come into contact with foodstuffs; preparation of a cold water extract; German version EN 645:1993) |
| DIN EN 646-2000 |
和食品接觸的紙和紙板.測定染色紙和紙板的色牢度 |
(Paper and board intended to come into contact with foodstuffs - Determination of colour fastness of dyed paper and board; German version EN 646:2000) |
| DIN EN 647-1994 |
和食品接觸的紙和紙板.熱水萃取物的制備 |
(Paper and board intended to come into contact with foodstuffs; preparation of a hot water extract; German version EN 647:1993) |
| DIN EN 648-1994 |
和食品接觸的紙和紙板.測定熒光增白的紙和紙板的色彩真實性 |
(Paper and board intended to come into contact with foodstuffs; determination of the fastness of fluorescent whitened paper and board; German version EN 648:1993) |
| DIN EN 648-2003 |
與食品密觸的紙張和紙板.測定熒光增白紙和紙板的色牢度 |
(Paper and board intended to come into contact with foodstuffs - Determination of the fastness of fluorescent whitened paper and board; German version EN 648:2003) |
| DIN EN 649-1997 |
彈性地板覆蓋物.勻質和非勻質聚氯乙烯地板鋪面.規范 |
(Resilient floor coverings - Homogeneous and heterogeneous polyvinyl chloride floor coverings - Specification; German version EN 649:1996) |
| DIN EN 649-2004 |
彈性地板覆蓋物.勻質和非勻質聚氯乙烯地板覆蓋物.規范 |
(Resilient floor coverings - Homogeneous and heterogeneous polyvinyl chloride floor coverings - Specification; (includes amendment A1:2003); German version EN 649:1996+A1:2003) |
| DIN EN 649-2004 |
彈性地板覆蓋物.勻質和非勻質聚氯乙烯地板覆蓋物.規范 |
|
| DIN EN 650-1997 |
彈性地板鋪面.用黃麻作背襯或聚氯乙烯聚脂氈墊作背襯的聚氯乙烯地板鋪面.規范 |
(Resilient floor coverings - Polyvinyl chloride floor coverings on jute backing or on polyester felt with polyvinyl chloride backing - Specification; German version EN 650:1996) |
| DIN EN 651-2004 |
彈性地板覆蓋物.帶泡沫層的聚氯乙烯地板覆蓋物.規范 |
(Resilient floor coverings - Polyvinyl chloride floor coverings with foam layer - Specification (includes amendment A1:2003); German version EN 651:1996+A1:2003) |
| DIN EN 651-2004 |
彈性地板覆蓋物.帶泡沫層的聚氯乙烯地板覆蓋物.規范 |
|
| DIN EN 652-1997 |
彈性地板鋪面.用軟木基作背襯的聚氯乙烯地板鋪面.規范 |
(Resilient floor coverings - Polyvinyl chloride floor coverings with cork-based backing - Specification; German version EN 652:1996) |
| DIN EN 653-1997 |
彈性地板鋪面.起泡聚氯乙烯.地板鋪面.規范 |
(Resilient floor coverings - Expanded (cushioned) polyvinyl chloride floor coverings - Specification; German version EN 653:1996) |
| DIN EN 654-2004 |
彈性地板覆蓋物.半柔性聚氯乙烯彈性磚片.規范 |
(Resilient floor coverings - Semi-flexible polyvinyl chloride tiles - Specification (includes amendment A1:2003); German version EN 654:1996+A1:2003) |
| DIN EN 654-2004 |
彈性地板覆蓋物.半柔性聚氯乙烯彈性磚片.規范 |
|
| DIN EN 655-1997 |
彈性地板鋪面.帶聚氯乙烯使用層的壓制軟木作背襯的板.規范 |
(Resilient floor coverings - Tiles of agglomerated composition cork with polyvinyl chloride wear layer - Specification; German version EN 655:1996) |
| DIN EN 656-2000 |
燃?xì)鉄崴仩t.公稱熱輸入超過70kW但不超過300kW的B型鍋爐 |
(Gas-fired hot water boilers - Type B boilers of nominal heat input exceeding 70 kW but not exceeding 300 kW; German version EN 656:1999) |
| DIN EN 657-1994 |
熱噴涂.概念.分類 |
(Thermal spraying; terminology, classification; German version EN 657:1994) |
| DIN EN 657-2005 |
熱噴涂.術語、分類 |
|
| DIN EN 658-1-1999 |
高級工程陶瓷.室溫下陶瓷復合材料的機械性能.第1部分:抗拉性能的測定 |
(Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 1: Determination of tensile properties; German version EN 658-1:1998) |
| DIN EN 658-2-2003 |
高級工業陶瓷.室溫下陶瓷復合材料的機械性能.第2部分:測定抗壓強度 |
(Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 2: Determination of compression properties; German version EN 658-2:2002) |
| DIN EN 658-3-2002 |
高級工業陶瓷.室溫下陶瓷復合材料的機械性能.第3部分:測定抗彎曲強度 |
(Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 3: Determination of flexural strength; German version EN 658-3:2002) |
| DIN EN 658-4-2003 |
高級工業陶瓷.室溫下陶瓷復合材料的機械性能.第4部分:通過有切口的試樣的壓縮負荷測定內層的剪切強度 |
(Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 4: Determination of interlaminar shear strength by compression loading of notched test specimens; German version EN 658-4:2003) |
| DIN EN 658-5-2003 |
高級工業陶瓷.室溫下陶瓷復合材料的機械性能.第5部分:利用瞬間彎曲試驗測定內層狀剪切強度 |
(Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three-points); German version EN 658-5:2002) |
| DIN EN 659-1996 |
消防防護手套 |
(Protective gloves for firefighters; German version EN 659:1996) |
| DIN EN 660-1-1999 |
彈性地板鋪面.磨損性能測定.第11部分:斯圖加特試驗 |
(Resilient floor coverings - Determination of wear resistance - Part 1: Stuttgart test; German version EN 660-1:1999) |
| DIN EN 660-1/A1-2003 |
彈性地板覆面層.耐磨性能測定.第11部分:斯圖加特試驗.修改件A1 |
(Resilient floor coverings - Determination of wear resistance - Part 1: Stuttgart test; Amendment A1; German version EN 660-1:1999/A1:2003) |
| DIN EN 660-2-1999 |
彈性地板鋪面.磨損性能測定.第2部分:弗里克-塔博試驗 |
(Resilient floor coverings - Determination of wear resistance - Part 2: Frick-Taber test; German version EN 660-2:1999) |
| DIN EN 660-2/A1-2003 |
彈性地板覆面層.耐磨性能測定.第2部分:弗里克-塔博試驗.修改件A1 |
(Resilient floor coverings - Determination of wear resistance - Part 2: Frick-Taber test; Amendment A1; German version EN 660-2:1999/A1:2003) |
| DIN EN 661-1995 |
彈性體鋪面.水?dāng)U散測定 |
(Resilient floor coverings - Determination of the spreading of water; German version EN 661:1994) |
| DIN EN 662-1995 |
彈性地板鋪面.濕度影響下凹坑測定 |
(Resilient floor coverings - Determination of curling on exposure to moisture; German version EN 662:1994) |
| DIN EN 663-1995 |
彈性地板鋪面.裝飾深度測定 |
(Resilient floor coverings - Determination of conventional pattern depth; German version EN 663:1994) |
| DIN EN 664-1995 |
彈性地板鋪面.揮發成分損耗測定 |
(Resilient floor coverings - Determination of volatile loss; German version EN 664:1994) |
| DIN EN 665-1995 |
彈性地板鋪面.軟化釋出 |
(Resilient floor coverings - Determination of exudation of plasticizers; German version EN 665:1994) |
| DIN EN 666-1995 |
彈性地板鋪面.膠凝作用測定 |
(Resilient floor coverings - Determination of gelling; German version EN 666:1994) |
| DIN EN 669-1997 |
油氈鋪面層.通過改變空氣濕度來測定油氈板的尺寸變化 |
(Resilient floor coverings - Determination of the dimensional stability of linoleum tiles caused by changes in atmospheric humidity; German version EN 669:1997) |
| DIN EN 670-1997 |
油氈鋪面層.油氈的識別和粘結劑及無機添料的含量的測定 |
(Resilient floor coverings - Identification of linoleum and determination of cement content and ash residue; German version EN 670:1997) |
| DIN EN 671-1 Berichtigung 1-2002 |
DIN EN 671-1:2001-08 (EN 671-1:2001/AC:2002) 勘誤 |
Corrigendum to DIN EN 671-1:2001-08 (EN 671-1:2001/AC:2002) |
| DIN EN 671-1-2001 |
固定式滅火系統.水龍帶系統.第1部分:具有半剛性水龍帶的軟管卷盤 |
Fixed firefighting systems - Hose systems - Part 1: Hose reels with semi-rigid hose; German version EN 671-1:2001 |
| DIN EN 671-2-2001 |
固定式滅火系統.水龍帶系統.第2部分:具有扁平水龍帶的水龍帶系統 |
Fixed firefighting systems - Hose systems - Part 2: Hose systems with lay-flat hose; German version EN 671-2:2001 |
| DIN EN 671-2/A1-2004 |
固定式消防系統.軟管系統.第2部分:帶吹塑軟管的軟管系統 |
|
| DIN EN 671-3-2000 |
固定的消防設備.軟管設備.第3部分:帶半鋼性軟管的軟管卷曲機和帶扁平軟管的軟管設備的維修 |
Fixed firefighting systems - Hose systems - Part 3: Maintenance of hose reels with semi-rigid hose and hose systems with lay-flat hose; German version EN 671-3:2000 + AC:2000 |
| DIN EN 672-1997 |
彈性地板鋪面.擠壓軟木的體密度測定 |
Resilient floor coverings - Determination of apparent density of agglomerated cork; German version EN 672:1996 |
| DIN EN 673-2001 |
建筑物用玻璃.導熱系數(U值)的測定.計算方法 |
Glass in building - Determination of thermal transmittance (U value) - Calculation method (including Amendment A1:2000); German version EN 673:1997 + A1:2000 |
| DIN EN 673-2003 |
建筑物用玻璃.導熱系數(U值)的測定.計算方法 |
(Glass in building - Determination of thermal transmittance (U value) - Calculation method (including Amendment A1:2000 + Amendment A2:2002); German version EN 673:1997 + A1:2000 + A2:2002) |
| DIN EN 674-1999 |
建筑物用玻璃.導熱系數(U值)的測定.防護熱板法 |
Glass in building - Determination of the thermal transmittance (U value) - Guarded hot plate method; German version EN 674:1997 |
| DIN EN 675-1999 |
建筑物用玻璃.導熱系數(U值)的測定.熱流量計法 |
Glass in building - Determination of the thermal transmittance (U value) - Heat flow meter method; German version EN 675:1997 |
| DIN EN 676-1996 |
氣體燃燒材料用帶鼓風的自動燃燒器 |
(Automatic forced draught burners for gaseous fuels; German version EN 676:1996) |
| DIN EN 677-1998 |
用氣體燃料的鍋爐.額定熱負載小于或等于70kW燃值鍋爐的特殊要求 |
(Gas-fired central heating boilers - Specific requirements for condensing boilers with a nominal heat input not exceeding 70 kW; German version EN 677:1998) |
| DIN EN 678-1994 |
熱壓處理過的加氣混凝土的干密度測定 |
(Determination of the dry density of autoclaved aerated concrete; German version EN 678:1993) |
| DIN EN 679-1994 |
熱壓處理過的加氣混凝土的抗壓強度的測定 |
(Determination of the compressive strength of autoclaved aerated concrete; German version EN 679:1993) |
| DIN EN 679-2005 |
高壓蒸養加氣混凝土抗壓強度測定 |
|
| DIN EN 680-1994 |
熱壓處理過的加氣混凝土的干燥收縮的測定 |
(Determination of the drying shrinkage of autoclaved aerated concrete; German version EN 680:1993) |
| DIN EN 681-1 Berichtigung 1-2003 |
對DINEN681-1:2003-05的勘誤 |
(Corrigenda to DIN EN 681-1:2003-05) |
| DIN EN 681-1-2003 |
彈性密封件.給水排水用管道連接密封件的材料要求.第1部分:硫化橡膠 |
Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber; German version EN 681-1:1996 + A1:1998 + A2:2002 + AC:2002 |
| DIN EN 681-2-2003 |
彈性體密封件.給水排水用管道連接密封件的材料要求.第2部分:熱塑彈性體 |
(Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 2: Thermoplastic elastomers; German version EN 681-2:2000 + A1:2002) |
| DIN EN 681-3-2003 |
彈性體密封件.給水排水用管道連接密封件的材料要求.第3部分:硫化橡膠多孔材料 |
(Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 3: Cellular materials of vulcanized rubber; German version EN 681-3:2000 + A1:2002) |
| DIN EN 681-4-2003 |
彈性體密封件.給水排水用管道連接密封件的材料要求.第4部分:聚氨酯密封鑄件 |
(Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 4: Cast polyurethane sealing elements; German Version EN 681-4:2000 + A1:2002) |
| DIN EN 682-2002 |
彈性體密封件.輸送氣體和烴類液體的管道和配件用密封件的材料要求 |
(Elastomeric seals - Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids; German version EN 682:2002) |
| DIN EN 683-1-1996 |
鋁和鋁合金.熱交換器用初加工材料(散熱片坯料).第1部分:交貨技術條件 |
(Aluminum and aluminium alloys - Finstock - Part 1: Technical conditions for inspection and delivery; German version EN 683-1:1996) |
| DIN EN 683-2-1996 |
鋁和鋁合金.熱交換器.第2部分:機械性能 |
(Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties; German version EN 683-2:1996) |
| DIN EN 683-3-1996 |
鋁和鋁塑性合金.熱交換器用預材料.第3部分:極限尺寸和公差極限 |
(Aluminum and aluminium alloys - Finstock - Part 3: Dimensional tolerances; German version EN 683-3:1996) |
| DIN EN 684-1996 |
彈性地板鋪面.縫合強度測定 |
(Resilient floor coverings - Determination of seam strength; German version EN 684:1995) |
| DIN EN 685-2003 |
彈性和疊層地板鋪面.分類(包括修改A1:2003) |
(Resilient and laminate floor coverings - Classification (includes Amendment A1:2003); German version EN 685:1995 + A1:2003) |
| DIN EN 686-1997 |
彈性地板鋪面.帶花紋和不帶花紋有泡沫材料背襯的油氈的規范 |
(Resilient floor coverings - Specification for plain and decorative linoleum on a foam backing; German version EN 686:1997) |
| DIN EN 687-1997 |
彈性地板鋪面.帶花紋和不帶花紋有軟木背襯的油氈的規范 |
(Resilient floor coverings - Specification for plain and decorative linoleum on a corkment backing; German version EN 687:1997) |
| DIN EN 688-1997 |
彈性地板鋪面.軟木油氈的規范 |
(Resilient floor coverings - Specification for corklinoleum; German version EN 688:1997) |
| DIN EN 689-1995 |
工作環境.與極限值和測量策略相比較吸入的化學物質放射量的測算指南 |
(Workplace atmospheres - Guidance for the assessment of exposure by inhalation to chemical agents for comparison with limit values and measurement strategy; German version EN 689:1995) |
| DIN EN 690-1995 |
農業機械.廄肥撒播機.安全性 |
(Agricultural machinery - Manure spreaders - Safety; German version EN 690:1994) |
| DIN EN 692-1996 |
機械壓力.安全性 |
(Mechanical presses - Safety; German version EN 692:1996) |
| DIN EN 693-2001 |
機床.安全.水壓. |
(Machine tools - Safety - Hydraulic presses; German version EN 693:2001) |
| DIN EN 694 Berichtigung 1-2002 |
DINEN694:2001-12(EN694:2001/AC:2002)勘誤 |
(Corrigenda to DIN EN 694:2001-12 (EN 694:2001/AC:2002)) |
| DIN EN 694 Berichtigung 2-2004 |
DIN EN 694-2001的技術勘誤 |
|
| DIN EN 694-2001 |
消防軟管.固定系統用半硬性軟管 |
(Fire-fighting hoses - Semi-rigid hoses for fixed systems; German version EN 694:2001) |
| DIN EN 695-1997 |
廚房洗滌盆.連接尺寸 |
(Kitchen sinks - Connecting dimensions; German version EN 695:1997) |
| DIN EN 695-2005 |
廚房洗滌槽.連接尺寸 |
|
| DIN EN 699-1995 |
通用纖維繩索.聚丙烯 |
(Fibre ropes for general service - Polypropylene; German version EN 699:1995) |
| DIN EN 702-1995 |
防護服.防高溫和火焰.檢驗方法.接觸熱穿透防護服或防護復材料的測定 |
(Protective clothing - Protection against heat and flame - Test method: Determination of the contact heat transmission through protective clothing or its materials; German version EN 702:1994) |
| DIN EN 703-1995 |
農業機械.青貯取料機具.安全性 |
(Agricultural machinery - Silage cutters - Safety; German version EN 703:1995) |
| DIN EN 704-1999 |
農業機械.檢拾壓捆機.安全性 |
(Agricultural machinery - Pick-up balers - Safety; German version EN 704:1999) |
| DIN EN 705 Berichtigung 1-1995 |
對DINEN705:1994-08的校正 |
(Corrigenda to DIN EN 705:1994-08) |
| DIN EN 705-1994 |
塑料管道系統.玻璃纖維增強熱固塑料管和管件.回歸分析和使用方法 |
(Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Methods for regression analyses and their use; German version EN 705:1994) |
| DIN EN 706-1996 |
農業機械.葡萄蔓切割翻轉機.安全性 |
(Agricultural machinery - Vine shoot tipping machines - Safety; German version EN 706:1996) |
| DIN EN 707-1999 |
農業機械.液體肥料施肥罐車.安全性 |
(Agricultural machinery - Slurry tankers - Safety; German version EN 707:1999) |
| DIN EN 708-2001 |
農業機械.帶動力驅動設備的耕作器具.安全性 |
(Agricultural machinery - Soil working machines with powered tools - Safety (including amendment A1:2000); German version EN 708:1996 + A1:2000) |
| DIN EN 709-2000 |
農林機械.帶懸掛式旋耕機,一般電動鋤具和有驅動輪的電動鋤具的手扶拖拉機.安全(包括修改件A1:1999)德文版本 |
(Agricultural and forestry machinery - Pedestrian controlled tractors with mounted rotary cultivators, motors hoes, motor hoes with drive wheel(s) - Safety (includes amendement A1:1999); German version EN 709:1997 + A1:1999) |
| DIN EN 71-1-1998 |
玩具的安全性.第1部分:機械和物理性能 |
(Safety of toys - Part 1: Mechanical and physical properties; German version EN 71-1:1998) |
| DIN EN 71-1/A1-2001 |
玩具的安全性.第1部分:機械和物理性能.修改件A1 |
(Safety of toys - Part 1: Mechanical and physical properties; Amendment A1; German version EN 71-1:1998/A1:2001) |
| DIN EN 71-1/A10-2005 |
玩具的安全性.第1部分:機械和物理特性 |
|
| DIN EN 71-1/A11-2005 |
玩具的安全性.第1部分:機械和物理性能 |
|
| DIN EN 71-1/A2-2002 |
玩具的安全性.第1部分:機械和物理性能.修改件A2 |
(Safety of toys - Part 1: Mechanical and physical properties; Amendment A2; German version EN 71-1:1998/A2:2002) |
| DIN EN 71-1/A4-2004 |
玩具的安全性.第1部分:機械和物理性能.修改件A4 |
|
| DIN EN 71-1/A5-2001 |
玩具的安全性.第1部分:機械和物理性能,修改件A5 |
(Safety of toys - Part 1: Mechanical and physical properties; Amendment A5; German version EN 71-1:1998/A5:2000) |
| DIN EN 71-1/A6-2002 |
玩具的安全性.機械和物理性能.修改件A6 |
(Safety of toys - Part 1: Mechanical and physical properties; Amendment A6; German version EN 71-1:1998/A6:2002) |
| DIN EN 71-1/A7-2002 |
玩具的安全性.機械和物理性能.修改件A7 |
(Safety of toys - Part 1: Mechanical and physical properties; Amendment A7; German version EN 71-1:1998/A7:2002) |
| DIN EN 71-1/A8-2003 |
玩具的安全性.第1部分:機械和物理性能.修改件A8 |
(Safety of toys - Part 1: Mechanical and physical properties; Amendment A8; German version EN 71-1:1998/A8:2003) |
| DIN EN 71-1/A9-2004 |
玩具的安全性.第1部分:機械和物理性能.修改件A9 |
|
| DIN EN 71-2 Berichtigung 1-1995 |
對DINEN71-2:1994-01的校正 |
(Amends to DIN EN 71-2:1994-01; German version EN 71-2:1993/AC:1995) |
| DIN EN 71-2-1994 |
玩具的安全性.易燃性 |
(Safety of toys; part 2: flammability; German version EN 71-2:1993) |
| DIN EN 71-3 Berichtigung 1-2003 |
DINEN71-3-2002的勘誤 |
(Corrigenda to DIN EN 71-3:2002-11 (EN 71-3:1994/A1:2000/AC:2000)) |
| DIN EN 71-3-2002 |
玩具的安全性.第3部分:固定件的移動 |
(Safety of toys - Part 3: Migration of certain elements; German version EN 71-3:1994 + A1:2000 + AC:2002) |
| DIN EN 71-4-1990 |
玩具的安全性.化學及類似試驗的試驗箱 |
(Safety of toys; experimental sets for chemistry and related activities; german version EN 71-4:1990) |
| DIN EN 71-4/A1-1998 |
玩具的安全性.第4部分:化學及類似試驗用試驗箱 |
(Safety of toys - Part 4: Experimental sets for chemistry and related activities; German version EN 71-4:1990/A1:1998) |
| DIN EN 71-4/A2-2003 |
玩具的安全性.第4部分:化學及類似試驗用試驗箱.修改件A2 |
(Safety of toys - Part 4: Experimental sets for chemistry and related activities; Amendment A2; German version EN 71-4:1990/A2:2003) |
| DIN EN 71-5-1993 |
玩具的安全第5部分:化學玩具(組)試驗品除外 |
(Safety of toys; part 5: chemical toys (sets) other than experimental sets; German version EN 71-5:1993) |
| DIN EN 71-6-1994 |
玩具的安全性.第6部分:與年齡組有關的警告說明圖標 |
(Safety of toys - Part 6: Graphical symbol for age warning labelling; German version EN 71-6:1994) |
| DIN EN 71-7-2002 |
玩具的安全性.第7部分:手指涂料的要求和試驗方法 |
(Safety of toys - Part 7: Finger paints; Requirements and test methods; German version EN 71-7:2002) |
| DIN EN 71-9-2005 |
玩具的安全性.第9部分:有機化合物.要求 |
|
| DIN EN 71-9-2005 |
玩具的安全性.第9部分:有機化合物.要求 |
|
| DIN EN 710-1998 |
鑄模和制芯機械與設備及其附屬設備的安全要求 |
(Safety requirements for foundry moulding and coremaking machinery and plant and associated equipment; German version EN 710:1997) |
| DIN EN 711-1995 |
內河航運船只.甲板用欄桿.要求.結構 |
(Inland navigation vessels - Railings for decks - Requirements, types; German version EN 711:1995) |
| DIN EN 712-1994 |
熱塑塑料管道系統.壓力管和異型件間抗拉機械連接.恒定負荷下抗拉出力檢驗法 |
(Thermoplastics piping systems; end-load bearing mechanical joints between pressure pipes and fittings; test method for resistance to pull-out under constant longitudinal force; German version EN 712:1993) |