標準號 |
中文名稱 |
英文名稱 |
| DIN 54333-1-1981 |
紡織品的檢驗.燃燒性能的測定.用水平法.由布邊燃燒點火 |
(Testing of textiles; determination of burning behaviour; horizontal method; ignition at the edge of the specimen) |
| DIN 54334-1975 |
紡織品的檢驗.燃燒性能的測定.點燃時間.由布邊燃燒點火 |
(Testing of textiles; determination of the burning behaviour; minimum ignition time, edge ignition) |
| DIN 54335-1977 |
紡織品的檢驗.燃燒性能的測定.用45°法.由布邊燃燒點火 |
(Testing of textiles; determination of burning behaviour, 45-method, ignition on the edge of the specimen) |
| DIN 54341-1988 |
公交有軌車輛座椅的檢驗.用一個紙墊測定燃燒性能 |
(Testing of seats in railways for public traffic; determination of burning behaviour with a paper pillow ignition source) |
| DIN 54345-1-1992 |
紡織品檢驗.靜電性能.電阻值的測定 |
(Testing of textiles; electrostatic behaviour; determination of electrical resistance) |
| DIN 54345-2-1991 |
紡織品的檢驗.靜電性能.紡織地毯人行走產生電荷試驗的測定 |
(Testing of textiles; electrostatic behaviour; determination of the charge of textile floor coverings by walking test) |
| DIN 54345-3-1985 |
紡織品的檢驗.靜電性能.用機器法測定織物地毯負荷 |
(Testing of textiles; electrostatic behaviour; determination of electrostatic charge of textile floor coverings by machine) |
| DIN 54345-4-1985 |
紡織品的檢驗.靜電性能.測定平面織物所帶的靜電值 |
(Testing of textiles; electrostatic behaviour; determination of electrostatic charge of textile fabrics) |
| DIN 54345-5-1985 |
紡織品的檢驗.靜電性能.在平面織物的布條上測定電阻值 |
(Testing of textiles; electrostatic behaviour; determination of electrical restistance of strips of textile fabrics) |
| DIN 54345-6-1992 |
紡織品的檢驗.靜電性能.鋪地織物電阻值的測定 |
(Testing of textiles; electrostatic behaviour; determination of the electrical resistance of textile floor coverings) |
| DIN 5435-1980 |
手動泵.公稱壓力為1至2.5的帶雙孔法蘭 |
(Hand-pumps; two hole tube flanges with shoulder, for nominal pressure 1 to 2,5) |
| DIN 54355-1977 |
紙漿的檢驗.紙漿抗苛性鈉溶液性能的測定(抗堿性能) |
(Testing of pulp; determination of the stability of pulp against sodium hydroxide solution (alkali resistance)) |
| DIN 54356-1977 |
紙漿的檢驗.紙漿的堿溶性測定 |
(Testing of pulp; determination of the alkali solubility of pulp) |
| DIN 54357-1978 |
紙漿的檢驗.卡巴值的測定 |
(Testing of Pulp; Determination of the Kappa Number) |
| DIN 54360-2004 |
紙漿.實驗室打漿.Jokro磨碎機法 |
|
| DIN 54361-1976 |
紙漿的檢驗.用糠醛法測定戊聚糧含量 |
(Testing of pulp; determination of pentosan content, furfural method) |
| DIN 54363-1980 |
紙漿和紙的檢驗.鐵.錳.銅.鈣和鎂含量的測定.用原子吸收光譜分析法測定(AAS) |
(Testing of pulp and paper; determination of iron, manganese, copper, calcium and magnesium contents, determination by atomic absorption spectroscopy) |
| DIN 5437-1987 |
手動泵.葉輪泵.尺寸.功率.規格 |
(Hand pumps; semirotary pumps; sizes, performance and dimensions) |
| DIN 54370-1999 |
紙漿、紙和紙板的檢驗.灼燒殘余物的測定 |
(Testing of pulp, paper and board - Determination of the residue on ignition) |
| DIN 54372-1988 |
紙漿和紙的試驗.鈣和鎂含量的測定.滴定分析測定法 |
(Testing of pulp and paper; determination of calcium and magnesium content; titrimetric determination) |
| DIN 54373-1989 |
紙漿.紙和紙板的檢驗.灰分中酸不溶比例的測定 |
(Testing of pulp, paper and board; determination of acid insoluble proportion of ignition residue) |
| DIN 54375-1993 |
紙漿、紙和紙板的試驗.用二乙基氨荒酸鹽進行銅含量的光度測定.燃燒殘余物的測定 |
(Testing of pulp, paper and board; photometric determination of copper content with diethyldithiocarbamat; determination in glow residue) |
| DIN 54376-1982 |
紙漿.紙和紙板的檢驗.錳含量測定.光度測量法 |
(Testing of pulp, paper and board; determination of manganese content; photometric method) |
| DIN 54377-1-1976 |
紙漿和紙的檢驗.用重力分析法測定二氧化硅的含量 |
(Testing of pulp and paper; determination of the silicium(IV)-oxid content, gravimetric method) |
| DIN 54377-2-1987 |
紙和紙漿的檢驗.用光度測量法測定二氧化硅的含量 |
(Testing of pulp and papier; determination of the silicium(IV)-oxid content; photometric method) |
| DIN 54378-1993 |
紙、紙板和厚板的檢驗.表面菌落計數的測定(OKZs) |
(Testing of paper and board; determination of the surface colony count OKZs) |
| DIN 54379-1992 |
紙.紙板和厚紙板的檢驗.總菌落計數測定(GKZ) |
(Testing of paper and board; determination of the total colony count) |
| DIN 54383-1979 |
紙.紙板和厚紙板的檢驗.克洛斯特里丁(Clostridien)發霉程度的測定 |
(Testing of paper and board; determination of spores of clostridium) |
| DIN 54400-1987 |
離子交換作用.概念 |
(Ion exchange; terminology) |
| DIN 54400-2004 |
離子交換.術語 |
|
| DIN 54401-2000 |
離子交換器試驗(珠承型).取樣 |
(Testing of ion exchangers (bead form) - Sampling) |
| DIN 54402-2001 |
離子交換器檢驗.陰離子交換器總效能測定 |
(Testing of ion exchangers - Determination of the total capacity of anion exchangers) |
| DIN 54403-2001 |
離子交換器檢驗.陽離子交換器總效能測定 |
(Testing of ion exchangers - Determination of the total capacity of cation exchangers) |
| DIN 54406-2000 |
離子交換器的試驗(珠承型).抗?jié)B透和流體力學應力的性能測定 |
(Testing of ion exchangers (bead form) - Determination of resistance to osmotic and hydromechanical stress) |
| DIN 54407-2003 |
離子交換樹脂的試驗.樹脂珠粒粒度分布的測定 |
(Testing of ion exchange resins - Determination of bead size distribution) |
| DIN 54408-1998 |
離子交換器檢驗.堆積密度,平衡濕度和干燥物料成份的測定 |
(Testing of ion exchangers - Determination of bulk weight density, equilibrium moisture content and solids) |
| DIN 54410-1985 |
離子交換器檢驗.密度測定 |
(Testing of ion exchangers; determination of density) |
| DIN 54411-1987 |
離子交換器的檢驗.泵壓送法及用聚合物的吸附作用檢驗離子交換器 |
(Testing of ion exchangers; recycling method for testing ion exchangers and polymer adsorption resins) |
| DIN 54411-2004 |
離子交換器的檢驗.離子交換器和聚合物吸附樹脂的循環檢驗方法 |
|
| DIN 54451-1978 |
金屬粘合劑和金屬粘結的檢驗.測定一種粘合劑在一段粘結中剪應力滑動圖形用拉剪試驗 |
(Testing of adhesives for metals and of bonded metal joints; tensile shear test for the determination of the shear stress-strain diagram of an adhesive in a bonded joint) |
| DIN 54452-1981 |
金屬粘合劑和金屬粘結的檢驗.壓剪試驗 |
(Testing of adhesives for metals and adhesively bonded metal joints; compression shear test) |
| DIN 54453-1982 |
金屬粘合劑和金屬粘結的檢驗.用旋轉式粘度計測定厭氧粘合劑的動態粘度 |
(Testing of adhesives for metals and of bonded metal joints; dynamic viscosity determination of anaerobic adhesives by rotation viscometer) |
| DIN 54455-1984 |
金屬粘合劑和金屬粘結的檢驗.扭剪試驗 |
(Testing of adhesives for metals and of bonded metal joints; torsional shear test) |
| DIN 54456-1989 |
粘膠材料結構及粘接的檢驗.耐氣候性能試驗 |
(Testing of structural adhesives; test of resistance to climatic conditions) |
| DIN 54461-2005 |
結構膠粘劑.粘合劑粘結牢度測試.彎曲剝離試驗 |
|
| DIN 54500-1996 |
紙的檢驗.與密度相關的纖維及紙的光散射系數的測定 |
(Testing of paper - Determination of the density-related light-scattering and absorption coefficients of paper and fibre materials) |
| DIN 54500-2004 |
紙的檢驗.與密度相關的纖維及紙的光散射和吸光系數的測定 |
|
| DIN 54515-1983 |
紙和紙板的檢驗.拒水性的測定 |
(Testing of paper and board; determination of the waterrepellent properties) |
| DIN 54516-1985 |
紙和紙板的檢驗.抗開裂測定 |
(Testing of paper and board; determination of plybond resistance) |
| DIN 54516-2004 |
紙和紙板的檢驗.抗開裂測定 |
|
| DIN 54517-1985 |
紙和紙板的檢驗.濕延伸率的測定 |
(Testing of paper and board; measurement of dimensional change after immersion in water) |
| DIN 54518-1987 |
紙和紙板的檢驗.紙板條壓縮阻力 |
(Testing of paper and board; compression strength, short span test) |
| DIN 54518-2004 |
紙和紙板的檢驗.短間距試驗測定抗壓強度 |
|
| DIN 54519-1993 |
紙板檢驗.實心紙板棱邊浸入阻力的測定 |
(Testing of board; short span test of solid board) |
| DIN 54530-10-2000 |
紙和紙板.紙筒的檢驗.第10部分:表面粗糙度的測定 |
(Paper and board - Testing of cores - Part 10: Determination of surface roughness) |
| DIN 54540-4-1989 |
紙的檢驗.衛生紙檢驗.吸水量的測定 |
(Testing of paper; testing of sanitary papers; determination of water absorption) |
| DIN 54540-5-1989 |
紙的檢驗.衛生紙檢驗.潮濕延伸率的測定 |
(Testing of paper; testing of sanitary papers; determination of elongation after water absorption) |
| DIN 54540-5-2005 |
紙?jiān)囼?yàn).薄頁紙和薄紙制品.第5部分:吸水后伸長率的測定 |
|
| DIN 54540-6-1989 |
紙的檢驗.衛生紙檢驗.疊裝吸水能力的測定 |
(Testing of paper; testing of sanitary papers; determination of water absorption of stacks) |
| DIN 54540-6-2005 |
紙?jiān)囼?yàn).薄頁紙和薄紙制品.第6部分:疊層吸水率的測定 |
|
| DIN 54540-9-1989 |
紙的檢驗.衛生紙檢驗.含濕量的測定 |
(Testing of paper; testing of sanitary papers; determination of moisture content) |
| DIN 54540-9-2005 |
紙?jiān)囼?yàn).薄頁紙和薄紙制品.第9部分:水分含量的測定 |
|
| DIN 546-1986 |
開槽圓螺母 |
(Slotted round nuts) |
| DIN 54600-1-1988 |
紙和紙板的檢驗.抗微生物添加劑的檢驗.四甲基秋蘭姆化二硫的測定(TMTD) |
(Testing of paper and board; testing on antimicrobial additives; determination of tetramethylthiuramdisulfid content (TMTD)) |
| DIN 54600-11-1982 |
紙和紙板的檢驗.對抗微生物添加劑的檢驗.2-氧代-2(4-羥基苯基)正羥肟酰氯含量的測定 |
(Testing of paper and board; testing for antimicrobial additives; determination of 2-oxo-2(4`-hydroxyphenyl)acethydroximic acid chloride content) |
| DIN 54600-8-1982 |
紙和紙板的檢驗.護微生物添加劑的檢驗.甲叉及甲叉硫氰酸鹽含量的測定 |
(Testing of paper and board; Testing for antimicrobial additives; Determination of the methylene-bis-thioscyanate content) |
| DIN 54603-1981 |
紙.紙板箱和紙板的檢驗.二乙醛含量的測定 |
(Testing of paper, boxboard and paper board; Determination of glyoxal content) |
| DIN 54604-1-1988 |
紙和紙板的檢驗.淀粉含量的測定品位天然淀粉酶的分析 |
(Testing of paper and board; determination of starch content; enzymatic analysis of native starch content) |
| DIN 54605-1993 |
紙漿.紙和紙板的檢驗.鎘含量的AAS測定 |
(Testing of pulp, paper and board; atomic absorption spectrometric determination of the cadmium content) |
| DIN 54606-1-1995 |
紙的檢驗.已印刷過的舊紙可紙漿精化的標識.第1部分:浮選紙漿精化法 |
(Testing of paper - Identification of the flotation deinkability of printed recovered paper - Part 1: Flotation deinking method) |
| DIN 54606-2-1995 |
紙的檢驗.已印刷過的舊紙可紙漿精化的標識.第2部分:洗滌紙漿精化法 |
(Testing of paper - Identification of the wash deinkability of printed recovered paper - Part 2: Wash deinking method) |
| DIN 5464-1965 |
帶直邊的花鍵軸連接.重型系列 |
(Straight-sided Splines; Heavy Series) |
| DIN 5466-1-2000 |
花鍵接頭,載荷能力計算.第1部分:一般基礎 |
(Splined joints, calculation of load capacity - Part 1: General basis) |
| DIN 547-1986 |
端面帶孔圓螺母 |
(Round nuts with drilled holes in one face) |
| DIN 5471-1974 |
機床.帶4個鍵的花鍵軸和花鍵孔的剖面.內定心.尺寸 |
(Machine Tools; Spline Shafts and Spline Bore Profiles with 4 Splines, Internal Centering, Dimensions) |
| DIN 5472-1980 |
機床.帶6齒的花鍵軸和花鍵套剖面.內徑定心.尺寸 |
(Machine Tools; Spline Shafts and Spline Bore Profiles with 6 Splines; Internal Centering, Dimensions) |
| DIN 5473-1992 |
邏輯和集論.符號和定義 |
(Logic and set theory; symbols and concepts) |
| DIN 5477-1983 |
百分率.千分率.概念.應用 |
(Per cent, parts per thousand; concepts, use) |
| DIN 5478-1973 |
圖示比例 |
(Scales in graphic representations) |
| DIN 548-1986 |
側面帶孔圓螺母 |
(Round nuts with set pin holes in side) |
| DIN 5480-1-1991 |
漸開線花鍵軸連接.基本概念 |
(Involute spline joints; principles) |
| DIN 5480-10-1991 |
漸開線花鍵軸連接.嚙合角30°.模數5的基礎尺寸和試驗尺寸 |
(Involute spline joints; 30?pressure angle; basic dimensions and test dimensions for module 5) |
| DIN 5480-11-1991 |
漸開線花鍵軸連接.嚙合角30°.模數6的基礎尺寸和試驗尺寸 |
(Involute spline joints; 30?pressure angle; basic dimensions and test dimensions for module 6) |
| DIN 5480-12-1991 |
漸開線花鍵軸連接.嚙合角30°.模數8基礎尺寸和試驗尺寸 |
(Involute spline joints; 30?pressure angle; basic dimensions and test dimensions for module 8) |
| DIN 5480-13-1991 |
漸開線花鍵軸連接.嚙合角30°.模數10基礎尺寸和試驗尺寸 |
(Involute splines joints; 30?pressure angle; basic dimensions and test dimensions for module 10) |
| DIN 5480-14-1986 |
漸開線花鍵軸連接.嚙合角30°.側面配合.公差 |
(Involute splines with 30?pressure angle; side fits, tolerances) |
| DIN 5480-15-1974 |
漸開線花鍵軸連接.齒面定中的檢驗和量規 |
(Involute Splines; Testing and Gauges for Side Fit) |
| DIN 5480-16-1986 |
漸開線花鍵軸連接.壓力角30°.齒輪滾刀.插齒刀.拉刀 |
(Involute splines with 30 pressure angle; hobs, pinion type cutters, broaches) |
| DIN 5480-2-1991 |
漸開線花鍵軸連接.嚙合角30°.概覽 |
(Involute spline joints; 30?pressure angle; survey) |
| DIN 5480-3-1991 |
漸開線花鍵軸連接.嚙合角30°.模數0.5、0.6、0.75、0.8和1的基礎尺寸和試驗尺寸 |
(Involute spline joints; 30?pressure angle; basic dimensions and test dimensions for modules 0,5, 0,6, 0,75, 0,8 and 1) |
| DIN 5480-4-1991 |
漸開線花鍵軸連接.嚙合角30°.模數1.25的基礎尺寸和試驗尺寸 |
(Involute spline joints; 30?pressure angle; basic dimensions and test dimensions for module 1,25) |
| DIN 5480-5-1991 |
漸開線花鍵軸連接.嚙合角30°.模數1.7和1.75的基礎尺寸和試驗尺寸 |
(Involute spline joints; 30?pressure angle; basic dimensions and test dimensions for module 1,5 and 1,75) |
| DIN 5480-6-1991 |
漸開線花鍵軸連接.嚙合角30°.模數2的基礎尺寸和試驗尺寸 |
(Involute spline joints; 30?pressure angle; basic dimensions and test dimensions for module 2) |
| DIN 5480-7-1991 |
漸開線花鍵軸連接.嚙合角30°.模數2.5的基礎尺寸和試驗尺寸 |
(Involute spline joints; 30?pressure angle; basic dimensions and test dimensions for module 2,5) |
| DIN 5480-8-1991 |
漸開線花鍵軸連接.嚙合角30°.模數3的基礎尺寸和試驗尺寸 |
(Involute spline joints; 30?pressure angle; basic dimensions and test dimensions for module 3) |
| DIN 5480-9-1991 |
漸開線花鍵軸連接.嚙合角30°.模數4的基礎尺寸和試驗尺寸 |
(Involute spline joints; 30?pressure angle; basic dimensions and test dimensions for module 4) |
| DIN 54800-1979 |
塑料檢驗.檢驗用聚氯乙烯(PVC)糊的制備 |
(Testing of plastics; preparation of polyvinyl chloride (PVC) pastes for testing purposes) |
| DIN 54801-1979 |
塑料檢驗.用Serers毛細管粘度計測定聚氯乙烯膏在高速度梯度時的表觀粘度 |
(Testing of plastics; determination of apparent viscosity at high rates of shear of polyvinyl chloride (PVC) pastes by Severs capillary viscosimeter) |
| DIN 54802-1-1997 |
塑料檢驗.加熱氯乙烯(VC)聚合物時增塑劑吸收量和增塑劑吸收速度的測定.第1部分:行星式攪拌機法 |
(Testing of plastics - Determination of plasticizer sorption and rate of plasticizer sorption in the heat of vinyl chloride (VC) polymers - Part 1: Planetary mixer method) |
| DIN 54802-2-1997 |
塑料檢驗.加熱氯乙烯(VC)聚合物時增塑劑吸收量和增塑劑吸收速度的測定.第2部分:靜態法 |
(Testing of plastics - Determination of plasticizer sorption and rate of plasticizer sorption in the heat of vinyl chloride (VC) polymers - Part 2: Statical method) |
| DIN 5481-1-1952 |
鋸齒孔和鋸齒軸剖面 |
(Internal and External Serrations) |
| DIN 5481-2-1956 |
內外鋸齒形花鍵.鋸齒孔量規.量規尺寸 |
(Internal and external serrations (serrations); gauging of serrated hubs, gauge dimensions) |
| DIN 5481-2005 |
鋸齒形花鍵軸 |
|
| DIN 5481-3-1965 |
鋸齒孔和鋸齒軸剖面.鋸齒軸過端量規.量規尺寸 |
(Go-gauging of serrated shafts; gauge dimensions) |
| DIN 5481-4-1955 |
鋸齒孔和鋸齒軸剖面.鋸齒軸的不過端量規.量規尺寸 |
(Internal and external serrations (serrations); not-go gauging of serrations, gauge dimensions) |
| DIN 5481-5-1955 |
鋸齒孔和鋸齒軸剖面.DIN5481B1.2-4的說明 |
(Internal and external serrations (serrations); explanations to DIN 5481 sheets 2 to 4) |
| DIN 54811-1984 |
塑料檢驗.用毛細管流變化測定塑料熔融物的流動特性 |
(Testing of plastics; determining the fluidity of plastics melts by the capillary rheometer) |
| DIN 54812-1987 |
塑料.環氧樹脂及其相關的材料.輕可皂化氯的測定 |
(Plastics; epoxide resins and related materials; determination of easily saponifable chlorine) |
| DIN 54813-1994 |
塑料檢驗.紡織玻璃纖維增強熱固塑料地面的檢驗.彎曲剪切試驗中斷裂負荷的測定 |
(Testing of plastics; testing of joints of textile glass reinforced polyester resins; determination of the breaking load by the bending shear test) |
| DIN 54815-1-1998 |
裝填聚酯樹脂成型材料的管道.第1部分:尺寸,材料,標識 |
(Pipes of filled polyester resin moulding materials - Part 1: Dimensions, materials, designation) |
| DIN 54815-2-1998 |
裝填聚酯樹脂成型材料的管道.第2部分:要求,檢驗 |
(Pipes of filled polyester resin moulding materials - Part 2: Requirements, testings) |
| DIN 5483-1-1983 |
隨時間變化的量.時間相關的術語 |
(Time-dependent quantities; terms for the time-dependency) |
| DIN 5483-2-1982 |
隨時間變化的量.公式符號 |
(Time-dependent quantities; letter symbols) |
| DIN 5483-3-1994 |
隨時間變化的量.隨時間按正弦變化的量的復數表示 |
(Time-dependent quantities - Part 3: Complex representation of sinusoidal time-dependent quantities) |
| DIN 54836-1984 |
可燃材料的檢驗.點燃溫度的測定 |
(Testing of combustible materials; determination of ignition temperature) |
| DIN 54841-3-2000 |
地下電纜和管道用塑料報警裝置.第3部分:可檢測的表 |
(Plastic warning devices for buried cables and pipelines - Part 3: Detectable table) |
| DIN 54841-5-2000 |
地下電纜和管道用塑料報警裝置.第5部分:電纜溝蓋 |
(Plastic warning devices for underground cables and pipelines - Part 5: Cable cover) |
| DIN 5485-1986 |
物理量的命名原則.特征詞與基礎詞構詞法 |
(Principles of terminology for physical quantities; composition of terms with adjectives and substantives) |
| DIN 5487-1988 |
付里葉.拉普拉斯和Z變換.符號和概念 |
(Fourier-, laplace- and Z-transformation; symbols and concepts) |
| DIN 5489-1990 |
電工技術的方向和符號.電路和磁路用規則.備用線路圖 |
(Directions and signs in electrical engineering; rules for electric and magnetic circuits, equivalent circuit diagrams) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com