標準號 |
中文名稱 |
英文名稱 |
| DIN EN 442-1-1996 |
散熱器和對流器.第1部分:技術規范和要求 |
(Radiators and convectors - Part 1: Technical specifications and requirements; German version EN 442-1:1995) |
| DIN EN 442-2-1997 |
散熱器和對流器.第2部分:試驗方法和額定功率 |
(Radiators and convectors - Part 2: Test methods and rating; German version EN 442-2:1996) |
| DIN EN 442-2/A1-2000 |
散熱器和對流器.第2部分:試驗方法和規定功率.修改件1 |
(Radiators and convectors - Part 2: Test methods and rating; Amendment A1; German version EN 442-2:1996/A1:2000) |
| DIN EN 442-3-1997 |
散熱器和對流器.第3部分:一致性評定 |
(Radiators and convectors - Part 3: Evaluation of conformity; German version EN 442-3:1997) |
| DIN EN 4420-2004 |
航空航天系列.合金鋼FE-PA3903制有彈簧張力的卡箍 |
|
| DIN EN 443-1997 |
消防隊用頭盔 |
(Protective helmets for firefighters; German version EN 443:1997) |
| DIN EN 444-1994 |
無損檢驗.用χ和γ射線對金屬材料作透視檢驗的原理 |
(Non-destructive testing; general principles for the radiographic examination of metallic materials using X-rays and gamma-rays; German version EN 444:1994) |
| DIN EN 445-1996 |
預應力件用壓射灰漿.檢驗方法 |
(Grout for prestressing tendons - Test methods; German version EN 445:1996) |
| DIN EN 446-1996 |
預應力件用壓射灰漿.壓射方法 |
(Grout for prestressing tendons - Grouding procedures; German version EN 446:1996) |
| DIN EN 447-1996 |
預應力件用壓射灰漿.通用壓射灰漿的要求 |
(Grout for prestressing tendons - Specification for common grout; German version EN 447:1996) |
| DIN EN 448-2003 |
區域供暖管道.直埋式熱水供應網用預隔熱連接的管道系統.聚氨酯絕熱和聚乙烯外覆層的鋼管用成套配件 |
(District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene; German version EN 448:2003) |
| DIN EN 449-1996 |
專用液化石油氣裝置規范.無排氣口的居室暖器(包括擴散催化燃燒的加熱器) |
(Specifications for dedicated liquefied petroleum gas appliances - Domestic flueless space heaters (including diffusive catalytic combustion heaters); German version EN 449:1996) |
| DIN EN 450-1-2005 |
混凝土用飛灰.第1部分:定義、規范和合格標準 |
|
| DIN EN 450-1-2005 |
混凝土用飛灰.第1部分:定義、規范和合格標準 |
|
| DIN EN 450-1995 |
混凝土飛灰的定義、要求和質量管理 |
(Fly ash for concrete - Definitions, requirements and quality control; German version EN 450:1994) |
| DIN EN 450-2-2005 |
混凝土用飛灰.第2部分:合格評定 |
|
| DIN EN 450-2-2005 |
混凝土用飛灰.第2部分:合格評定 |
|
| DIN EN 45002-1990 |
檢驗室鑒定的一般規范.EN45002:1989 |
(General criteria for the assessment of testing laboratories; Identical with EN 45002:1989) |
| DIN EN 45003-1995 |
實驗室認可系統的檢定和測試.操作和認可總要求 |
(Calibration and testing laboratory accreditation systems - General requirements for operation and recognition (ISO/IEC Guide 58:1993); Trilingual version EN 45003:1995) |
| DIN EN 45004-1995 |
檢驗機構不同類型工作的通用準則 |
(General criteria for the operation of various types of bodies performing inspection; trilingual version EN 45004:1995) |
| DIN EN 45010-1998 |
認證點的評定認可的一般要求. |
(General requirements for assessment and accreditation of certification/registration bodies (ISO/IEC Guide 61:1996); Trilingual version EN 45010:1998) |
| DIN EN 45011-1998 |
產品認證機構的一般要求 |
(General requirements for bodies operating product certification systems (ISO/IEC Guide 65:1996); Trilingual version EN 45011:1998) |
| DIN EN 45012-1998 |
質量保證系統評估及認證機構的一般要求 |
(General requirements for bodies operating assessment and certification/registration of quality systems (ISO/IEC Guide 62:1996); Trilingual version EN 45012:1998) |
| DIN EN 45013-1990 |
職員認證機構的一般規范.EN45013:1989 |
(General criteria for certification bodies operating certification of personnel; EN 45013:1989) |
| DIN EN 45014-1998 |
供貨方貨物符合申報的一般規范 |
(General criteria for supplier`s declaration of conformity (ISO/IEC Guide 22:1996); Trilingual version EN 45014:1998) |
| DIN EN 45020-1998 |
標準化及其相關活動.一般術語 |
(Standardization and related activities - General vocabulary (ISO/IEC Guide 2:1996); Trilingual version EN 45020:1998) |
| DIN EN 451-1-1995 |
飛灰檢驗方法.第1部分:自由鈣氧含量的測定 |
(Method of testing fly ash - Part 1: Determination of free calcium oxide content; German version EN 451-1:1994) |
| DIN EN 451-1-2004 |
飛灰的試驗方法.第1部分:測定游離氧化鈣含量的測定 |
|
| DIN EN 451-2-1995 |
飛灰檢驗方法.第2部分:通過濕法篩選測定精細度 |
(Method of testing fly ash - Part 2: Determination of fineness by wet sieving; German version EN 451-2:1994) |
| DIN EN 452-1995 |
更換用容器.A級更換用容器.尺寸和一般要求 |
(Swap bodies - Swap bodies of class A - Dimensions and general requirements; German version EN 452:1995) |
| DIN EN 453-2000 |
食品加工機械.面粉攪拌器.安全和衛生要求 |
(Food processing machinery - Dough mixers - Safety and hygiene requirements; German version EN 453:2000) |
| DIN EN 454-2000 |
食品加工機械.行星式攪拌機.安全和衛生要求 |
(Food processing machinery - Planetary mixers - Safety and hygiene requirements; German version EN 454:2000) |
| DIN EN 4549-2004 |
航空航天系列.耐熱鋼或耐熱鎳合金管連接件.焊接的連接件端.設計構造.英制系列 |
|
| DIN EN 455-1-2001 |
一次性醫用手套.第1部分:密封性要求和檢驗 |
(Medical gloves for single use - Part 1: Requirements and testing for freedom from holes; German version EN 455-1:2000) |
| DIN EN 455-2-2001 |
一次性醫用手套.第2部分:物理特性的要求和檢驗(包括技術勘誤1-1996) |
(Medical gloves for single use - Part 2: Requirements and testing for physical properties (including Technical Corrigendum 1:1996); German version EN 455-2:2000) |
| DIN EN 455-3-2000 |
一次性醫用手套.第3部分:生物評定要求和試驗 |
(Medical gloves for single use - Part 3: Requirements and testing for biological evaluation; German version EN 455-3:1999) |
| DIN EN 4550-1-2004 |
航空航天系列.管道連接件37?設計構造.英尺系列.第1部分:球形陽螺紋焊接端 |
|
| DIN EN 4550-2-2004 |
航空航天系列.管道連接件37?設計構造.英制.第2部分:端口 |
|
| DIN EN 4550-3-2004 |
航空航天系列.管道連接件37?設計構造.英制.第3部分:端口接頭 |
|
| DIN EN 4550-4-2004 |
航空航天系列.管道連接件37?設計構造.英制.第4部分:承口密封端 |
|
| DIN EN 45501 Berichtigung 1-1994 |
DINEN45501/10.92的修改件 |
(Amendment to DIN EN 45501/10.92; German version EN 45501:1992 + AC:1993) |
| DIN EN 45501-1992 |
非自動操作天平計量方面的內容 |
(Metrological aspects of non-automatic weighing instruments; german version EN 45501:1992) |
| DIN EN 45502-1-1998 |
活性可植入的醫療裝置.第1部分:安全性.標識和由制造商提供的信息的一般規定 |
(Active implantable medical devices - Part 1: General requirements for safety, marking and information to be provided by the manufacturer; German version EN 45502-1:1997) |
| DIN EN 45502-2-1-2004 |
活性可植入的醫療裝置.第2-1部分:用于治療緩慢性心率失常的活性可植入醫療裝置(心臟起搏器)的特殊要求 |
|
| DIN EN 45503-1996 |
供水,供能源,交通保障以及通訊部門中委托人的委托授予方法評估用證書標準 |
(Attestation standard for the assessment of contract award procedures of entities operating in the water, energy, transport and telecommunication sectors; German version EN 45503:1996) |
| DIN EN 4551-2004 |
航空航天系列.耐熱鋼制管道連接件37?轉的螺套.英制系列 |
|
| DIN EN 45510-1-1997 |
發電廠設備購置說明.第1部分:通用規定 |
(Guide for procurement of power station equipment - Part 1: Common clauses; German version EN 45510-1:1997) |
| DIN EN 45510-2-2-1999 |
發電廠設備購置指南.第2部分:電氣設備.不間斷電力供應 |
(Guide for procurement of power station equipment - Part 2-2: Electrical equipment; uninterruptible power supplies; German version EN 45510-2-2:1999) |
| DIN EN 45510-2-3-2001 |
發電站設備購置指南.第2-3部分:電氣設備.固定電池充電器 |
(Guide for procurement of power station equipment - Part 2-3: Electrical equipment; stationary batteries chargers; German version EN 45510-2-3:2000) |
| DIN EN 45510-2-4-2001 |
發電站設備購置指南.第2-4部分:電氣設備.高動力靜態轉換器 |
(Guide for procurement of power station equipment - Part 2-4: Electrical equipment; high power static converters; German version EN 45510-2-4:2000) |
| DIN EN 45510-2-6-2001 |
發電廠設備購置指南.第2-6部分:電氣設備.發電機 |
(Guide for procurement of power station equipment - Part 2-6: Electrical equipment; Generators; German version EN 45510-2-6:2000) |
| DIN EN 45510-3-1-2000 |
發電廠設備購置指南.第3-1部分:鍋爐.水管鍋爐 |
(Guide for procurement of power station equipment - Part 3-1: Boilers; water tube boilers; German version EN 45510-3-1-1999) |
| DIN EN 45510-3-2-2000 |
發電廠設備購置指南.第3-2部分:鍋爐.火管鍋爐 |
(Guide for procurement of power station equipment - Part 3-2: Boilers; shell boilers; German version EN 45510-3-2:1999) |
| DIN EN 45510-3-3-2000 |
發電廠設備購置指南.第3-4部分:鍋爐.流化層點燃的鍋爐 |
(Guide for procurement of power station equipment - Part 3-3: Boilers; boilers with fluidized bed firing; German version EN 45510-3-3-1999) |
| DIN EN 45510-4-1-1999 |
發電廠設備購置指南.第4-1部分:附屬設備.減少灰塵散發的設備 |
(Guide for procurement of power station equipment - Part 4-1: Boiler auxiliaries; equipment for reduction of dust emissions; German version EN 45510-4-1:1999) |
| DIN EN 45510-4-10-1999 |
發電廠設備購置指南.第4-10部分:鍋爐附件.煙道氣脫氮(DeNO)設備 |
(Guide for procurement of power station equipment - Part 4-10: Boiler auxiliaries - Flue gas denitrification (De-NO) plant; German version EN 45510-4-10:1999) |
| DIN EN 45510-4-2-1999 |
發電廠設備購置指南.第4-2部分:附屬設備.煤氣/空氣,蒸氣/空氣,和煤氣/煤氣的熱交換器 |
(Guide for procurement of power station equipment - Part 4-2: Boiler auxiliaries; gas-air, steam-air and gas-gas heaters; German version EN 45510-4-2:1999) |
| DIN EN 45510-4-3-1999 |
發電廠設備購置指南.第4-3部分:附屬設備.鼓風機設備 |
(Guide for procurement of power station equipment - Part 4-3: Boiler auxiliaries; draught plant; German version EN 45510-4-3:1999) |
| DIN EN 45510-4-4-2002 |
電廠設備購置指南.第4-4部分:鍋爐輔助設備.燃料制備設備 |
(Guide for procurement of power station equipment - Part 4-4: Boiler auxiliaries; Fuel preparation equipment; German version EN 45510-4-4:2002) |
| DIN EN 45510-4-5-2002 |
電廠設備購置指南.第4-5部分:鍋爐輔助設備.煤搬運和散貨堆存 |
(Guide for procurement of power station equipment - Part 4-5: Boiler auxiliaries; Coal handling and bulk storage plant; German version EN 45510-4-5:2002) |
| DIN EN 45510-4-6-1999 |
發電廠設備購置指南.第4-6部分:附屬設備.煙氣除硫設備(DeSO) |
(Guide for procurement of power station equipment - Part 4-6: Boiler auxiliaries; flue gas desulphurization (DeSO); German version EN 45510-4-6:1999) |
| DIN EN 45510-4-7-1999 |
發電廠設備購置指南.第4-7部分:附屬設備.灰輸送設備 |
(Guide for procurement of power station equipment - Part 4-7: Boiler auxiliaries; ash handling plant; German version EN 45510-4-7:1999) |
| DIN EN 45510-4-8-1999 |
發電廠設備購置指南.第4-8部分:鍋爐附件.塵埃輸送設備 |
(Guide for procurement of power station equipment - Part 4-8: Boiler auxiliaries - Dust handling plant; German version EN 45510-4-8:1999) |
| DIN EN 45510-4-9-1999 |
發電廠設備購置指南.第4-9部分:鍋爐附件.吹灰機 |
(Guide for procurement of power station equipment - Part 4-9: Boiler auxiliaries - Sootblowers; German version EN 45510-4-9:1999) |
| DIN EN 45510-5-1-1998 |
發電廠設備購置說明.第5-1部分:蒸汽輪機 |
(Guide for procurement of power station equipment - Part 5-1: Steam turbines; German version EN 45510-5-1:1998) |
| DIN EN 45510-5-2-1998 |
發電廠設備購置說明.第5-2部分:燃汽輪機 |
(Guide for procurement of power station equipment - Part 5-2: Gas turbines; German version EN 45510-5-2:1998) |
| DIN EN 45510-5-3-1998 |
發電廠設備購置說明.第5-3部分:風力渦輪機 |
(Guide for procurement of power station equipment - Part 5-3: Wind turbines; German version EN 45510-5-3:1998) |
| DIN EN 45510-5-4-1998 |
發電廠設備購置說明.第5-4部分:水力渦輪機.蓄水儲能泵.泵渦輪機 |
(Guide for procurement of power station equipment - Part 5-4: Hydraulic turbines, storage-pumps and pump-turbines; German version EN 45510-5-4:1998) |
| DIN EN 45510-6-1-1998 |
發電廠設備購置說明.第6-1部分:渦輪機輔助設備.除氣器 |
(Guide for procurement of power station equipment - Part 6-1: Turbine auxiliaries; deaerators; German version EN 45510-6-1:1998) |
| DIN EN 45510-6-2-1998 |
發電廠設備購置說明.第6-2部分:渦輪機輔助設備.給水預熱器 |
(Guide for procurement of power station equipment - Part 6-2: Turbine auxiliaries; feedwater heaters; German version EN 45510-6-2:1998) |
| DIN EN 45510-6-3-1998 |
發電廠設備購置說明.第6-3部分:渦輪機輔助設備.冷凝設備 |
(Guide for procurement of power station equipment - Part 6-3: Turbine auxiliaries; condensator plant; German version EN 45510-6-3:1998) |
| DIN EN 45510-6-4-2000 |
發電廠設備購置指南.第6-4部分:渦輪機輔助設備和泵 |
(Guide for procurement of power station equipment - Part 6-4: Turbine auxiliaries; pumps; German version EN 45510-6-4:1999) |
| DIN EN 45510-6-5-2000 |
發電廠設備購置指南.第6-5部分:渦輪機輔助設備和干燥冷卻系統 |
(Guide for procurement of power station equipment - Part 6-5: Turbine auxiliaries; dry cooling systems; German version EN 45510-6-5:1999) |
| DIN EN 45510-6-6-2000 |
發電廠設備購置指南.第6-6部分:渦輪機輔助設備、濕式和濕式/干燥冷卻塔 |
(Guide for procurement of power station equipment - Part 6-6: Turbine auxiliaries; wet and wet/dry cooling towers; German version EN 45510-6-6:1999) |
| DIN EN 45510-6-7-1998 |
發電廠設備購置說明.第6-7部分:渦輪機輔助設備.脫水器/中間過熱器 |
(Guide for procurement of power station equipment - Part 6-7: Turbine auxiliaries; Moisture separator reheaters; German version EN 45510-6-7:1998) |
| DIN EN 45510-6-8-2000 |
發電廠設備購置指南.第6-8部分:渦輪機輔助設備和起重機 |
(Guide for procurement of power station equipment - Part 6-8: Turbine auxiliaries; cranes; German version EN 45510-6-8:1999) |
| DIN EN 45510-6-9-2000 |
發電廠設備購置指南.第6-9部分:渦輪機輔設備和冷卻水系統 |
(Guide for procurement of power station equipment - Part 6-9: Turbine auxiliaries; cooling water systems; German version EN 45510-6-9:1999) |
| DIN EN 45510-7-1-2000 |
發電廠設備和系統購置指南.第7-1部分:管件和閥門.高壓管道系統 |
(Guide for procurement of power station plant, equipment and systems - Part 7-1: Pipework and valves; high pressure piping systems; German version EN 45510-7-1:1999) |
| DIN EN 45510-7-2-2000 |
發電廠設備和系統購置指南.第7-2部分:管件和閥門.鍋爐和高壓管道閥門 |
(Guide for procurement of power station plant, equipment and systems - Part 7-2: Pipework and valves; boiler and high pressure piping valves; German version EN 45510-7-2:1999) |
| DIN EN 45510-8-1-1998 |
發電廠設備購置指南.第8-1部分:控制技術 |
(Guide for procurement of power station equipment - Part 8-1: Control and instrumentation; German version EN 45510-8-1:1998) |
| DIN EN 4552-2004 |
航空航天系列.耐熱鋼制37?球面管子接頭.焊接端直螺紋接頭.英制系列 |
|
| DIN EN 4553-2004 |
航空航天系列.耐熱鋼制37?球面管子接頭.焊接端90?彎管螺紋接頭.英制系列 |
|
| DIN EN 4554-2004 |
航空航天系列.耐熱鋼制37?球面管子接頭.加螺紋直活管節.英制系列 |
|
| DIN EN 45544-1-2000 |
工作場所空氣.有毒氣體和蒸氣的直接濃度測量和直接檢測用的電氣裝置.第1部分:一般要求和試驗方法 |
(Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 1: General requirements and test methods; German version EN 45544-1:1999) |
| DIN EN 45544-2-2000 |
工作場所空氣.有毒氣體和蒸氣的直接濃度測量和直接檢測用的電氣裝置.第2部分:在限制值范圍內的用于測量濃度 |
(Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 2: Performance requirements for apparatus used for measuring concentrations in the region of limit values; G |
| DIN EN 45544-3-2000 |
工作場所空氣.有毒氣體和蒸氣的直接濃度測量和直接檢測用的電氣裝置.第3部分:在限制值之上用于測量濃度的裝 |
(Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 3: Performance requirements for apparatus used for measuring concentrations well above limit values; German |
| DIN EN 45544-4-2000 |
工作場所空氣.有毒氣體和蒸氣的直接濃度測量和直接檢測用的電氣裝置.第4部分:選擇安裝使用和維修指南 |
(Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 4: Guide for selection, installation, use and maintenance; German version EN 45544-4:1999) |
| DIN EN 4555-2004 |
航空航天系列.耐熱鋼制37?球面管子接頭.焊接端套圈.英制系列 |
|
| DIN EN 4556-2004 |
航空航天系列.耐熱鋼制37?球面管子接頭.帽組件.英制系列 |
|
| DIN EN 4557-2004 |
航空航天系列.耐熱鋼制37?球面管子接頭.焊接端T形螺紋接頭.英制系列 |
|
| DIN EN 456-1991 |
漆.涂料和類似產品.閃點測定.快速法 |
(Paints, varnishes and related products; determination of flashpoint; rapid equilibrium method (ISO 3679:1983 modified); german version EN 456:1991) |
| DIN EN 4560-2004 |
航空航天系列.21000 kPa及以下的37?球面管子螺紋.英制系列.技術規范 |
|
| DIN EN 4561-2004 |
航空航天系列.耐熱鋼制焊接管子接頭.90?彎管.英制系列 |
|
| DIN EN 4562-2004 |
航空航天系列.耐熱鋼制焊接管子接頭.異徑管.英制系列 |
|
| DIN EN 4563-2004 |
航空航天系列.耐熱鋼制焊接管子接頭.三通.英制系列 |
|
| DIN EN 457-1992 |
機器的安全性.聲警報信號.一般要求.設計和檢驗 |
(Safety of machinery; auditory danger signals; general requirements, design and testing (ISO 7731:1986, modified); german version EN 457:1992) |
| DIN EN 458-1994 |
聽覺保護器.挑選,保養,維護和安裝的建議.說明書 |
(Hearing protectors; recommendations for selection, use, care and maintenance; guidance document; German version EN 458:1993) |
| DIN EN 4585-2004 |
航空航天系列.彈簧拉伸卡箍.技術規范 |
|
| DIN EN 459-1-2002 |
建筑石灰.第1部分:定義、規范和合格標準 |
(Building lime - Part 1: Definitions, specifications and conformity criteria; German version EN 459-1:2001) |
| DIN EN 459-2-2002 |
建筑石灰.第2部分:試驗方法 |
(Building lime - Part 2: Test methods; German version EN 459-2:2001) |
| DIN EN 459-3-2002 |
建筑石灰.第3部分:合格評定 |
(Building lime - Part 3: Conformity evaluation; German version EN 459-3:2001) |
| DIN EN 46-1-2005 |
木材防腐劑.對家天牛(Linnaeus)預防作用的測定.第1部分:殺幼蟲效果(實驗室法) |
|
| DIN EN 46-1990 |
木材防腐劑.對家天牛的新孵化幼蟲預防作用的測定(實驗室法) |
(Wood preservatives; determination of the preventive action against recently hatched larvae of Hylotrupes bajulus (Linnaeus) (laboratory method); german version EN 46:1988) |
| DIN EN 460-1994 |
木材和木材產品耐久性.全木的自然耐久性.對在危害等級下使用的木材耐久性的要求的說明 |
(Durability of wood and wood-based products - Natural durability of solid wood - Guide to the durability requirements for wood to be used in hazard classes; German version EN 460:1994) |
| DIN EN 46003-1999 |
質量體系.醫療設備.ENISO9003實施的特殊要求 |
(Quality systems - Medical devices - Particular requirements for the application of EN ISO 9003; German version EN 46003:1999) |
| DIN EN 461-1999 |
專用液化石油氣裝置規范.不超過10kW的無排氣口的居室暖器 |
(Specification for dedicated liquefied petroleum gas appliances - Flueless non-domestic space heaters not exceeding 10 kW; German version EN 461:1999) |
| DIN EN 461-2004 |
專用液化石油氣裝置規范.不超過10kW的無煙道非家用空間加熱器 |
|
| DIN EN 462-1-1994 |
無損檢驗.透視照像片質量.第1部分:圖像質量檢驗計(透度計).圖像質量數據測定 |
(Non-destructive testing; image quality of radiographs; part 1: image quality indicators (wire type); determination of image quality values; German version EN 462-1:1994) |
| DIN EN 462-3-1996 |
無損檢驗.透視照像片質量.第3部分:冶煉材料的照片質量等級 |
(Non-destructive testing - Image quality of radiogrammes - Part 3: Image quality classes for ferrous metals; German version EN 462-3:1996) |
| DIN EN 462-4-1994 |
無損檢驗.透視照像片質量.第4部分:試驗測定靈敏度和行幀度 |
(Non-destructive testing - Image quality of radiographs - Part 4: Experimental evaluation of image quality values and image quality tables; German version EN 462-4:1994) |
| DIN EN 462-5-1996 |
無損檢驗.透視照像片質量.第5部分:圖像質量指示器(雙絲型),圖像不清析度數值測定 |
(Non-destructive testing - Image quality of radiographs - Part 5: Image quality of indicators (duplex wire type), determination of image unsharpness value; German version EN 462-5:1996) |
| DIN EN 463-1994 |
防護服.防液體化學材料腐蝕.試驗方法:抗液體噴射穿透能力的測定(噴射式驗) |
(Protective clothing - Protection against liquid chemicals - Test methods: Determination of resistance to penetration by a jet of liquid (Jet-test); German version EN 463:1994) |
| DIN EN 464-1994 |
防護服.防包括液體氣霧劑和固體顆粒的液狀和氣狀化學藥品.檢驗方法.氣體密封張力的泄漏密封性測定 |
(Protective clothing - Protection against liquid and gaseous chemicals, including liquid aerosols and solid particles - Test method: Determination of leak-tightness of gas-tight suits (internal pressure test); German version EN 464:1994) |
| DIN EN 465-1999 |
防護服.放液體化學試劑.不同部分之間帶有噴霧密封的防化服(4型)的效率要求 |
(Protective clothing - Protection against liquid chemicals - Performance requirements for chemical protective clothing with spray-tight connections between different parts of the clothing (Type 4 equipment) (includes Amendment A1:1998); German version EN |
| DIN EN 466-1-1999 |
防護服.防液態化學藥品腐蝕.第1部分:衣服的不同部分之間液態密封連接的防化學服裝的性能 |
(Protective clothing - Protection against liquid chemicals - Part 1: Performance requirements for chemical protective clothing with liquid-tight connections between different parts of the clothing (Type 3 equipment) (includes Amendement A1:1998); German v |
| DIN EN 467-1999 |
防護服.防液態化學藥品腐蝕.能對身體部分起防化學侵蝕作用的服裝的性能要求 |
(Protective clothing - Protection against liquid chemicals - Performance requirements for garments providing chemical protection to parts of the body (includes Amendment A1:1998); German version EN 467:1995 + A1:1998) |
| DIN EN 468-1994 |
防護服.防液體化學材料腐蝕.試驗方法:抗噴霧穿透能力(噴霧試驗) |
(Protective clothing - Protection against liquid chemicals - Test method: Determination of resistance to penetration by spray (Spray-Test); German version EN 468:1994) |
| DIN EN 469-1996 |
消防隊用防護服.抗火災用防護服的要求和檢驗方法 |
(Protective clothing for firefighters - Requirements and test methods for protective clothing for firefighting; German version EN 469:1995) |
| DIN EN 47-1990 |
木材防腐劑.對家天牛的幼蟲的毒值測定(實驗室法) |
(Wood preservatives; determination of the toxic values against larvae of Hylotrupes bajulus (Linnaeus) (laboratory method); german version EN 47:1988) |
| DIN EN 47-2005 |
木材防腐劑.防家天牛(Linnaeus)幼蟲的毒效測定.實驗室法 |
|
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com