標準號 |
中文名稱 |
英文名稱 |
| DIN EN 352-1-2003 |
聽力保護器.一般要求.第1部分:耳套 |
(Hearing protectors - General requirements - Part 1: Ear-Muffs; German version EN 352-1:2002) |
| DIN EN 352-2-2003 |
聽力保護器.一般要求.第2部分:耳塞 |
(Hearing protectors - General requirements - Part 2: Ear-plugs; German version EN 352-2:2002) |
| DIN EN 352-3-2003 |
聽力保護器.一般要求.第3部分:固定在工業防護帽上的耳套 |
(Hearing protectors - General requirements - Part 3: Ear-muffs attached to an industrial safety helmet; German version EN 352-3:2002) |
| DIN EN 352-4-2001 |
護耳器.安全要求和檢驗.第4部分:依據聲強的耳機護套 |
(Hearing protectors - Safety requirements and testing - Part 4: Level-dependant ear-muffs; German version EN 352-4:2001) |
| DIN EN 352-5-2003 |
聽力防護器.安全要求和檢驗.第5部分:有源降噪耳機護套 |
(Hearing protectors - Safety requirements and testing - Part 5: Active noise reduction ear-muffs; German version EN 352-5:2002) |
| DIN EN 352-6-2003 |
聽力防護器.安全要求和檢驗.第6部分:帶電子音頻輸入的耳機護套 |
(Hearing protectors - Safety requirements and testing - Part 6: Ear-muffs with electrical audio input; German version EN 352-6:2002) |
| DIN EN 352-7-2003 |
護聽器.安全要求和檢驗.第7部分:電平相關耳塞 |
(Hearing protectors - Safety requirements and testing - Part 7: Level-dependent ear-plugs; German version EN 352-7:2002) |
| DIN EN 353-1-2002 |
防止人員墜落的保護裝置.第1部分:帶固定導向裝置的攀登保護裝置 |
(Personal protective equipment against falls from a height - Part 1: Guided type fall arresters including a rigid anchor line; German version EN 353-1:2002) |
| DIN EN 353-2-2002 |
防止人員墜落的保護裝置.第2部分:帶活動導向裝置的攀登保護裝置 |
(Personal protective equipment against falls from a height - Part 2: Guided type fall arresters including a flexible anchor line; German version EN 353-2:2002) |
| DIN EN 354-2002 |
防人員墜落的保護裝置.連結繩索 |
(Personal protective equipment against falls from a height - Lanyards; German version EN 354:2002) |
| DIN EN 3541-1992 |
航空和航天.帶自動調心球軸承和螺紋桿的可調吊環頭.尺寸、力矩、軸承間隙和負荷 |
(Aerospace series; rod-ends, adjustable, self-aligning ball bearing, with threaded shank; dimensions, torques, clearances and loads; german version EN 3541:1992) |
| DIN EN 3542-1998 |
航空和航天.自鎖,耐高溫鎳基合金NIPH2801(因康X750)制金屬絲螺紋組件 |
(Aerospace series - Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH2801 (Inconel X750); German version EN 3542:1998) |
| DIN EN 3543-1997 |
航空和航天.鈍化耐蝕耐高溫鋼制短螺紋帶翼形十字槽100度沉頭緊配合螺絲.等級:1100MPa/425℃ |
(Aerospace series - Screws, 100 countersunk normal head, offset cruciform recess, close tolerance shank, short thread, in heat and corrosion resisting steel, passivated; classification: 1100 MPa (at ambient temperature)/425 C; German version EN 3543:1997) |
| DIN EN 355-2002 |
防人員墜落的保護裝置.能量吸收器 |
(Personal protective equipment against falls from a height - Energy absorbers; German version EN 355:2002) |
| DIN EN 356-2000 |
建筑用玻璃.安全玻璃.防人力攻擊阻抗性的試驗和分類 |
(Glass in building - Security glazing - Testing and classification of resistance against manual attack; German version EN 356:1999) |
| DIN EN 3561-2004 |
航空航天系列.鈦合金管連接件8°30.在管端焊接和軋制的帶動梁密封端頭的箍 |
|
| DIN EN 3566-2004 |
航空航天系列.鈦合金管連接件8°30.帶鎖緊環的接頭 |
|
| DIN EN 3567-001-2003 |
航空航天系列.符合MIL-STD-1553B的多路傳送數據總線系統中使用的串聯耦合器.第001部分:技術規范 |
(Aerospace series - In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B - Part 001: Technical specification; German and English version EN 3567-001:2001) |
| DIN EN 3567-003-2003 |
航空航天系列.符合MIL-STD-1553B的多路傳送數據總線系統中使用的串聯耦合器.第003部分:單個的串聯耦合器.產 |
(Aerospace series - In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B - Part 003: Single in-line couplers; Product standard; German and English version EN 3567-003:2001) |
| DIN EN 3567-004-2003 |
航空航天系列.符合MIL-STD-1553B的多路傳送數據總線系統中使用的串聯耦合器.第004部分:復式串聯耦合器.產品 |
(Aerospace series - In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B - Part 004: Double in-line couplers; Product standard; German and English version EN 3567-004:2001) |
| DIN EN 357-2000 |
建筑用玻璃.透明或半透明玻璃制品的耐火上釉件.耐火性分類 |
(Glass in building - Fire resistant glazed elements with transparent or translucent glass products - Classification of fire resistance; German version EN 357:2000) |
| DIN EN 358-2000 |
控制工作位置和防止從高處墜落的人員防護設備.控制和限制工作位置的安全帶以及控制工作位置的小短索 |
(Personal protective equipment for work positioning and prevention of falls from a height - Belts for work positioning and restraint and work positioning lanyards; German version EN 358:1999) |
| DIN EN 36-1999 |
從上面供水的壁懸式坐浴盆.連接尺寸 |
(Wall-hung bidets with over-rim supply - Connecting dimensions; German version EN 36:1998) |
| DIN EN 360-2002 |
防人員墜落的保護裝置.回收型防止墜落裝置 |
(Personal protective equipment against falls from a height - Retractable type fall arresters; German version EN 360:2002) |
| DIN EN 361-2002 |
防人員墜落的保護裝置.整體吊帶 |
(Personal protective equipment against falls from a height - Full body harnesses; German version EN 361:2002) |
| DIN EN 3611-1995 |
航空和航天.套筒.尺寸和配合選擇.設計標準 |
(Aerospace series - Spigots - Dimensions and fit selection; design standard; German version EN 3611:1995) |
| DIN EN 3612-1996 |
航空和航天.花鍵槽.設計標準 |
(Aerospace series - Undercuts for splines - Design standard; German version EN 3612:1996) |
| DIN EN 362-1993 |
防人員墜落保護裝置.連接件 |
(Personal protective equipment against falls from a height; connectors; german version EN 362:1992) |
| DIN EN 363-2002 |
防人員墜落的保護裝置.墜落阻止系統 |
(Personal protective equipment against falls from a height - Fall arrest systems; German version EN 363:2002) |
| DIN EN 364 Berichtigung 1-1994 |
對DINEN364標準修正 |
(Corrigendum to DIN EN 364:1993-02; German version EN 364:1992/AC:1993) |
| DIN EN 364-1993 |
防人員墜落保護裝置.檢驗方法 |
(Personal protective equipment against falls from a height; test methods; german version EN 364:1992) |
| DIN EN 3642-1996 |
航空和航天.鈦TI-P02制陽極處理圓頂100度普通沉頭實心鉚釘.英制系列 |
(Aerospace series - Rivets, solid, 100 countersunk normal head, with dome, in titanium TI-PO2, anodized - Inch based series; German version EN 3642:1996) |
| DIN EN 3643-1996 |
航空和航天.鈦TI-P02制陽極處理100度普通沉頭實心鉚釘.英制系列 |
(Aerospace series - Rivets, solid, 100 countersunk normal head, in titanium TI-PO2, anodized - Inch based series; German version EN 3643:1996) |
| DIN EN 3644-1996 |
航空和航天.鈦TI-P02制陽極處理通用頭實心鉚釘.英制系列 |
(Aerospace series - Rivets, solid, universal head, in titanium TI-PO2, anodized - Inch based series; German version EN 3644:1996) |
| DIN EN 365-1993 |
防人員墜落保護裝置.使用說明和標志的一般要求 |
(Personal protective equipment against falls from a height; general requirements for instructions, for use and for marking; german version EN 365:1992) |
| DIN EN 365-2004 |
防人員從高處墜落的保護裝置.使用說明、維修、周期檢驗、修理、標記和包裝的一般要求 |
|
| DIN EN 3663-2004 |
航空航天系列.管連接件.丁腈橡膠制成的O形環.75IRHD.溫度范圍:-55℃到+135℃ |
|
| DIN EN 3665-1997 |
航空和航天.涂層材料的檢驗方法.耐鋁合金線性腐蝕的檢驗 |
(Aerospace series - Test methods for paints and varnishes - Filiform corrosion resistance test on aluminium alloys; German version EN 3665:1997) |
| DIN EN 367-1992 |
防護服.防熱和防火.檢驗方法.火焰作用下熱穿透的測定 |
(Protective clothing; protection against heat and flames; test method: determining of the heat transmission on exposure to flame; german version EN 367:1992) |
| DIN EN 3676-1998 |
航空和航天.薄壁,自鎖螺紋接頭.設計標準 |
(Aerospace series - Inserts, thin wall, self-locking - Design standard; German version EN 3676:1998) |
| DIN EN 368-1993 |
防護服.防液體化學材料.檢驗方法.抗液體滲透材料的抗力 |
(Protective clothing for use against liquid chemicals; test method: resistance of materials to penetration by liquids; german version EN 368:1992) |
| DIN EN 3688-2004 |
航空航天系列.焊接管用鈦合金制成的T環形填充物.14000kPa標稱壓力 |
|
| DIN EN 3689-2004 |
航空航天系列.焊接管用鈦合金制成的T環形填充物.28000kPa標稱壓力 |
|
| DIN EN 3690-2004 |
航空航天系列.鈦合金管連接件8°30.長悶頭活接頭 |
|
| DIN EN 3691-2004 |
航空航天系列.鈦合金管連接件8°30.焊接端長悶頭活接頭 |
|
| DIN EN 3696-2003 |
航空航天系列.熱阻鋼洗衣機 |
(Aerospace series - Washers in heat resisting steel; German and English version EN 3696:2001) |
| DIN EN 37-1999 |
自由沖水的座式抽水馬桶水箱.連接尺寸 |
(Pedestal W.C. pans with independent water supply - Connecting dimensions; German version EN 37:1998) |
| DIN EN 370-1993 |
木材防腐劑.家具蛀蟲根除劑的作用測定(DeGeer) |
(Wood preservatives; determination of eradicant efficacy in preventing emergence of Anobium punctatum (De Geer); German version EN 370:1993) |
| DIN EN 371-1992 |
呼吸器官防護器.防低終餾點有機化合物的AX浮氣器和組合過濾器.要求.檢驗.標識 |
(Respiratory protective devices; AX gas filters and combined filters against low boiling organic compounds; requirements, testing, marking; german version EN 371:1992) |
| DIN EN 372-1992 |
呼吸器官防護器.防所謂特殊化合物的SX浮氣器和組合過濾器.要求.檢驗.標識 |
(Respiratory protective devices; SX gas filters and combined filters against specific named compounds; requirements, testing, marking; german version EN 372:1992) |
| DIN EN 3720-1995 |
航空和航天.自鎖MoS*2涂層FE-PA92HT(A286)高溫鋼制十二角螺母.等級:1100MPa(室溫)/425℃ |
(Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), MoS coated - Classification: 1100 MPa (at ambient temperature)/425 C; German version EN 3720:1995) |
| DIN EN 3721-1995 |
航空和航天.自鎖帶圓柱形劃孔MoS*2涂層FE-PA92HT(A286)高溫鋼制十二角螺母.等級:1100MPa(室溫)/425℃ |
(Aerospace series - Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286), MoS coated - Classification: 1100 MPa (at ambient temperature)/425 C; German version EN 3721:1995) |
| DIN EN 3722-1995 |
航空和航天.自鎖MoS*2涂層FE-PA92HT(A286)高溫鋼制裝入式鉚接螺母.等級:1100MPa(室溫)/425℃ |
(Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286), MoS coated - Classification: 1100 MPa (at ambient temperature)/425 C; German version EN 3722:1995) |
| DIN EN 3723-1996 |
航空和航天.耐高溫鋼FE-PA92HT(A286)制,MoS2涂層,自鎖,六角螺母.等級:1100MPa(室溫下)/425℃ |
(Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), MoS coated - Classification: 1100 MPa (at ambient temperature)/425 C; German version EN 3723:1996) |
| DIN EN 3724-2005 |
航空航天系列.MoS2涂覆的鈦合金TI-P64001制長螺紋細桿雙六角頭螺栓.強度等級:1100 MPa(室溫) |
|
| DIN EN 3725-2005 |
航空航天系列.MoS2涂覆的陽極化處理的鈦合金TI-P64001制長螺紋標準桿六凸角凹口盤頭螺釘.強度等級:1100 MPa(室溫) |
|
| DIN EN 3726-2005 |
航空航天系列.MoS2耐熱鋼FE-PA2601 (A286)制自鎖緊夾緊螺母.強度等級:1100 MPa(室溫)/425鳦 |
|
| DIN EN 373-1993 |
防護服.抗液體金屬飛濺的評定 |
(Protective clothing; assessment of resistance of materials to molten metal splash; German version EN 373:1993) |
| DIN EN 3730-2003 |
航空航天系列.帶橡膠墊圈的鋁合金式固定和滑動支架的夾具.尺寸和質量 |
(Aerospace series - Clamps, saddle fixed and sliding version in aluminium alloy with rubber cushioning - Dimensions, masses; German and English version EN 3730:2001) |
| DIN EN 374-1-1994 |
防化學藥品和微生物手套.第1部分:術語和性能要求 |
(Protective gloves against chemicals and micro-organisms; part 1: terminology and performance requirements; german version EN 374-1:1994) |
| DIN EN 374-2-1994 |
防化學藥品和微生物手套.第2部分:穿透阻力的測定 |
(Protective gloves against chemicals and micro-organisms; part 2: determination of resistance to penetration; German version EN 374-2:1994) |
| DIN EN 374-3-1994 |
防化學藥品和微生物手套.第3部分:化學藥品穿透阻力的測定 |
(Protective gloves against chemicals and micro-organisms; part 3: determination of resistance to permeation by chemicals; German version EN 374-3:1994) |
| DIN EN 3740-1996 |
航空和航天.鈦合金制陽極處理MoS鍛造短螺紋小頭六角配合螺釘.等級:1100MPa(室溫下)/315℃ |
(Aerospace series - Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, MoS lubricated - Classification: 1100 MPa (at ambient temperature)/315 C; German version EN 3740:1996) |
| DIN EN 3741-2005 |
航空航天系列.米制夾緊螺母.安裝孔及組件 |
|
| DIN EN 3745-201-2003 |
航空航天系列.飛行器用光纖和電纜.試驗方法.第201部分:外觀檢查 |
(Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 201: Visual examination; German and English version EN 3745-201:2002) |
| DIN EN 3745-205-2003 |
航空航天系列.飛行器用光纖和電纜.試驗方法.第205部分:電纜縱向尺寸的穩定性 |
(Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 205: Cable longitudinal dimensional stability; German and English version EN 3745-205:2002) |
| DIN EN 3745-301-2003 |
航空航天系列.飛行器用光纖和電纜.試驗方法.第301部分:衰減性 |
(Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 301: Attenuation; German and English version EN 3745-301:2002) |
| DIN EN 3745-302-2003 |
航空航天系列.飛行器用光纖和電纜.試驗方法.第302部分:數字孔徑 |
(Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 302: Numerical aperture; German and English version EN 3745-302:2002) |
| DIN EN 3745-305-2003 |
航空航天系列.飛行器用光纖和電纜.試驗方法.第305部分:周圍光耦合的消除 |
(Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 305: Immunity to ambient light coupling; German and English version EN 3745-305:2002) |
| DIN EN 3745-504-2003 |
航空航天系列.飛行器用光纖和電纜.試驗方法.第504部分:微彎曲試驗 |
(Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 504: Micro bending test; German and English version EN 3745-504:2002) |
| DIN EN 3745-507-2003 |
航空航天系列.飛行器用光纖和電纜.試驗方法.第507部分:切開 |
(Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 507: Cut-through; German and English version EN 3745-507:2002) |
| DIN EN 3745-508-2003 |
航空航天系列.飛行器用光纖和電纜.試驗方法.第508部分:扭轉 |
(Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 508: Torsion; German and English version EN 3745-508:2002) |
| DIN EN 3745-509-2003 |
航空航天系列.飛行器用光纖和電纜.試驗方法.第509部分:紐結試驗 |
(Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 509: Kink test; German and English version EN 3745-509:2002) |
| DIN EN 3745-510-2003 |
航空航天系列.飛行器用光纖和電纜.試驗方法.第510部分:彎曲試驗 |
(Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 510: Bending test; German and English version EN 3745-510:2002) |
| DIN EN 3745-511-2002 |
航空航天系列.飛行器用光纜.試驗方法.第511部分:電纜間的磨損 |
(Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 511: Cable to cable abrasion; German and English version EN 3745-511:2002) |
| DIN EN 3745-701-2002 |
航空航天系列.飛行器用光纜.試驗方法.第701部分:可剝離性 |
(Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 701: Strippability; German and English version EN 3745-701:2002) |
| DIN EN 3746-2005 |
航空航天系列.氟硅酮橡膠(FVMQ)O型密封圈.硬度為80IRHD |
|
| DIN EN 3747-2005 |
航空航天系列.氟硅酮橡膠(FVMQ)O型密封圈.技術規范 |
|
| DIN EN 3748-2002 |
航空和航天系列.O形密封環凹槽.尺寸 |
(Aerospace series - O-ring grooves - Dimensions; German and English version EN 3748:2001) |
| DIN EN 375-2001 |
由生產商提供的專業用活體外診斷試劑的信息 |
(Information supplied by the manufacturer with in vitro diagnostic reagents for professional use; German version EN 375:2001) |
| DIN EN 3752-2005 |
航空航天系列.MoS2涂覆的耐熱鋼FE-PA2601 (A286)制MJ螺紋自鎖緊螺母.等級:1100 MPa(室溫)/425 鳦.技術規范 |
|
| DIN EN 3759-1996 |
航空和航天.耐蝕耐高溫鋼制鈍化螺紋接近根部帶翼型十字槽平頭螺釘.等級:1100MPa(室溫下)/425℃ |
(Aerospace series - Screws, pan head, offset cruciform recess, threaded to head, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/425 C; German version EN 3759:1996) |
| DIN EN 376-2002 |
生產者在實驗室中用自檢測診斷試劑提供信息 |
(Information supplied by the manufacturer with in vitro diagnostic reagents for self-testing; German version EN 376:2002, German and English texts) |
| DIN EN 3760-1996 |
航空和航天.耐蝕耐高溫鋼制鈍化螺紋接近根部帶翼型十字槽100度沉頭螺釘.等級:1100MPa(室溫下)/425℃ |
(Aerospace series - Screws, 100 countersunk normal head, offset cruciform recess, threaded to head, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/425 C; German version EN 3760:1996) |
| DIN EN 3769-1997 |
航空和航天.耐蝕鋼和耐高溫合金的電解拋光 |
(Aerospace series - Electrolytic polishing of corrosion resistant steels and heat resisting alloys; German version EN 3769:1997) |
| DIN EN 377-1999 |
非工業流程用燃?xì)馄骶呒捌湔{(diào)節附件用潤滑劑 |
(Lubricants for applications in appliances and associated controls using combustible gases except those designed for use in industrial processes (includes Amendment A1:1996); German version EN 377:1993 + A1:1996) |
| DIN EN 3773-001-1999 |
航空和航天.單極,恒溫,額定電流為1A至25A,斷流容量65In/100Amax的保護開關.第001部分:交貨技術條件 |
(Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A, switching capacity 65 I/1000 A max. - Part 001: Technical specification; German version EN 3773-001:1999) |
| DIN EN 3773-003-1999 |
航空和航天.單極,恒溫,額定電流為1A至25A,斷流容量65In/100Amax的保護開關.第003部分:公制端子螺紋.產品標 |
(Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A, switching capacity 65 I/1000 A max. - Part 003: Metric thread terminals; product standard; German version EN 3773-003:1999) |
| DIN EN 3773-004-1999 |
航空和航天.單極,恒溫,額定電流為1A至25A,斷流容量65In/100Amax的保護開關.第004部分:UNC端子螺紋.產品標準 |
(Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A, switching capacity 65 I/1000 A max. - Part 004: UNC thread terminals; product standard; German version EN 3773-004:1999) |
| DIN EN 3774-001-1999 |
航空和航天.三極,恒溫,額定電流為2A至25A,斷流容量65In的保護開關.第001部分:交貨技術條件 |
(Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 2 A to 25 A, switching capacity 65 I - Part 001: Technical specification; German version EN 3774-001:1999) |
| DIN EN 3774-003-1999 |
航空和航天.三極,恒溫,額定電流為2A至25A,斷流容量65In的保護開關.第003部分:公制端子螺紋.產品標準 |
(Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 2 A to 25 A, switching capacity 65 I - Part 003: Metric thread terminals; product standard; German version EN 3774-003:1999) |
| DIN EN 3774-004-1999 |
航空和航天.三極,恒溫,額定電流為2A至25A,斷流容量65In的保護開關.第004部分:UNC端子螺紋.產品標準 |
(Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 2 A to 25 A, switching capacity 65 I - Part 004: UNC thread terminals; product standard; German version EN 3774-004:1999) |
| DIN EN 378-1-2000 |
冷凍設備和熱泵.安全和環境要求.第1部分:基本要求、定義、分類和選擇標準 |
(Refrigerating systems and heat pumps - Safety and environmental requirements - Part 1: Basic requirements, definitions, classification and selection criteria; German version EN 378-1:2000) |
| DIN EN 378-2-2000 |
冷凍設備和熱泵.安全和環境要求.第2部分:設計、制造、試驗、標記和文獻工作 |
(Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation; German version EN 378-2:2000) |
| DIN EN 378-3-2000 |
冷凍設備和熱泵.安全和環境要求.第3部分:安裝地點和人員保護 |
(Refrigerating systems and heat pumps - Safety and environmental requirements - Part 3: Installation site and personal protection; German version EN 378-3:2000) |
| DIN EN 378-4-2000 |
冷凍設備和熱泵.安全和環境要求.第4部分:操作、維修、修理和回收 |
(Refrigerating systems and heat pumps - Safety and environmental requirements - Part 4: Operation, maintenance, repair and recovery; German version EN 378-4:2000) |
| DIN EN 3788-2004 |
航空航天系列.管連接件8°30.防護管帽 |
|
| DIN EN 3789-2004 |
航空航天系列.管連接件8°30.帶外螺紋的防護管塞 |
|
| DIN EN 379-1998 |
可變換光傳導級的焊接保護濾光器和帶2個光傳導級的焊接保護濾光器的要求(包括修改A1:1998) |
(Specification for welding filters with switchable luminous transmittance and welding filters with dual luminous transmittance (includes Amendment A1:1998); German version EN 379:1994 + A1:1998) |
| DIN EN 3790-2004 |
航空航天系列.管連接件8°30.帶內螺紋的防護管帽 |
|
| DIN EN 38-1992 |
自由沖水的壁懸式抽水馬桶水箱.連接尺寸 |
(Wall hung W.C. pan with independent water supply; connecting dimensions; german version EN 38:1992) |
| DIN EN 380-1993 |
木結構.檢驗方法.靜負荷下檢驗的一般原理 |
(Timber structures; test methods; general principles for static load testing; German version EN 380:1993) |
| DIN EN 381-1-1993 |
手持式鏈鋸操作者的防護服.第1部分:檢驗鏈鋸切割阻力的檢驗平臺 |
(Protective clothing for users of hand held chain saws; part 1: test rig for testing resistance to cutting by a chain saw; German version EN 381-1:1993) |
| DIN EN 381-10-2003 |
手提式鏈鋸使用者防護服.第10部分:上身防護裝置的試驗方法 |
(Protective clothing for users of hand-held chainsaws - Part 10: Test method for upper body protectors; German version EN 381-10:2002) |
| DIN EN 381-11-2003 |
手持式鏈鋸使用者的防護服.第11部分:上體防護裝置的要求 |
(Protective clothing for users of hand-held chainsaws - Part 11: Requirements for upper body protectors; German version EN 381-11:2002) |
| DIN EN 381-2-1995 |
手提式鏈鋸使用者保護服.第2部分:護腿試驗方法 |
(Protective clothing for users of hand held chain saws - Part 2: Test methods for leg protectors; German version EN 381-2:1995) |
| DIN EN 381-3-1996 |
手提式鏈鋸使用者保護服.第3部分:鞋靴的檢驗方法 |
(Protective clothing for users of hand held chain saws - Part 3: Test methods for footwear; German version EN 381-3:1996) |
| DIN EN 381-4-1999 |
手提式鏈鋸使用者保護服.第4部分:使用鏈鋸的保護手套的檢驗方法 |
(Protective clothing for users of hand-held chainsaws - Part 4: Test methods for chainsaw protective gloves; German version EN 381-4:1999) |
| DIN EN 381-5-1995 |
手提式鏈鋸使用者保護服.第5部分:護腿的要求 |
(Protective clothing for users of hand held chain saws - Part 5: Requirements for leg protectors; German version EN 381-5:1995) |
| DIN EN 381-7-1999 |
手提式鏈鋸使用者保護服.第7部分:使用鏈鋸的保護手套的要求 |
(Protective clothing for users of hand-held chainsaws - Part 7: Requirements for chainsaw protective gloves; German version EN 381-7:1999) |
| DIN EN 381-8-1997 |
手提式鏈鋸使用者保護服.第8部分:使用鏈鋸時用的護腿的檢驗方法 |
(Protective clothing for users of hand-held chain saws - Part 8: Test methods for chain saw protective gaiters; German version EN 381-8:1997) |
| DIN EN 381-9-1997 |
手提式鏈鋸使用者保護服.第9部分:使用鏈鋸時用的護腿的要求 |
(Protective clothing for users of hand-held chain saws - Part 9: Requirements for chain saw protective gaiters; German version EN 381-9:1997) |
| DIN EN 3818-2005 |
航空航天系列.鈦合金TI-P64001制MJ螺紋螺栓.強度等級:1100 MPa(室溫).技術規范 |
|
| DIN EN 382-1-1993 |
纖維板.表面吸濕作用的測定.經干燥的纖維板的檢驗方法 |
(Fibreboards; determination of surface absorption; part 1: test method for dry process fibreboards; German version EN 382-1:1993) |
| DIN EN 382-2-1994 |
纖維板.表面吸濕作用的測定.硬板檢驗方法 |
(Fibreboards; determination of surface absorption; part 2: test method for hardboards; German version EN 382-2:1993) |
| DIN EN 383-1993 |
木結構檢驗方法.榫型緊固體嵌入強度和基礎值測定 |
(Timber structures; test methods; determination of embedding strength and foundation values for dowel type fasteners; German version EN 383:1993) |
| DIN EN 3831-2005 |
航空航天系列.MoS2涂覆的耐熱鋼FE-PM3801 (17-4PH)制自鎖緊MJ螺紋厚壁插件 |
|
| DIN EN 3832-2005 |
航空航天系列.耐熱鎳基合金NI-P100HT(鉻鎳鐵合金718)制長螺紋細桿雙六角頭螺栓.等級:1550MPa(室溫)/650℃ |
|
| DIN EN 3833-2005 |
航空航天系列.鈍化的耐熱鎳基合金NI-PH2601(鉻鎳鐵合金718)制MJ螺紋螺栓.等級:1550MPa(室溫)/650℃.技術規范 |
|
| DIN EN 384-1996 |
支撐用建筑木材.測定特性強度值,特性剛度值以及特性粗密度值 |
(Structural timber - Determination of characteristic values of mechanical properties and density; German version EN 384:1995) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com