標準號 |
中文名稱 |
英文名稱 |
| DIN 32727-1981 |
熱交換器的流動量安全裝置.安全技術要求和檢驗 |
(Flow switches for heat transfer installations; safety requirements and test) |
| DIN 32728-1981 |
裝料控制器.裝有有機液體的熱交換器用液位控制器.安全技術要求和檢驗 |
(Filling controls; low fluid cut off (control) for heat transfer installations with organic fluids; safety requirements and test) |
| DIN 32730-1993 |
取暖裝置中水和蒸氣用具有安全功能的調節閥.安全技術要求和檢驗 |
(Valves with a safety function for water and steam in heating systems; safety requirements and testing) |
| DIN 32732-1989 |
機械操作的燃燒空氣的瓣閥.安全技術要求.檢驗和作標記 |
(Mechanically actuated combustion air flaps; safety requirements, testing and marking) |
| DIN 32736 Bb.1-2000 |
建筑物管理.服務的定義和范圍.服務的比較 |
(Building Management - Definitions and scope of services - Comparison of services) |
| DIN 32736-2000 |
建筑物管理.服務的定義和范圍 |
(Building Management - Definitions and scope of services) |
| DIN 32742-1-1995 |
辦公技術和數據技術.傳真機.概念及分類 |
(Office machines - Facsimile equipment - Part 1: Concepts and classification) |
| DIN 32742-2-1995 |
辦公室和數據技術.傳真復印機.第2部分:基本要求 |
(Office machines - Facsimile equipment - Part 2: Basic requirements) |
| DIN 32742-3-1995 |
辦公室和數據技術.傳真復印機.第3部分:簡要說明 |
(Office machines - Facsimile communication equipment - Part 3: Minimum information to be specified) |
| DIN 32742-5-1992 |
辦公技術和數據技術.傳真復印機.對傳真樣件的最低要求 |
(Office machines; facsimile equipment; minimum requirements for documents to be transmitted) |
| DIN 32742-6-1994 |
辦公技術和數據技術.傳真機.對傳真接收機的最低要求 |
(Office machines; facsimile equipment; minimum requirements for received copies) |
| DIN 32742-7-1999 |
辦公技術和數據技術.傳真復印機.第7部分:傳真復印機類型.結構和應用 |
(Office machines facsimile equipment - Part 7: Realisation and application) |
| DIN 32742-8-2001 |
信息技術.辦公室設備.傳真設備.第8部分:傳真信息信號規則 |
(Information technology - Office equipment; Facsimile equipment - Part 8: Rules for facsimile information signals) |
| DIN 32744-1-2001 |
辦公機器；儲蓄存折上的磁條；第1部分:機械性能和電磁性能 |
(Office machines - Magnetic stripes on saving books - Part 1: Mechanical and electromagnetic properties) |
| DIN 32744-2-1983 |
辦公技術和數據技術；儲蓄存折上的磁條；位置與記錄 |
(Office machines; magnetic stripes on saving books; position and recording) |
| DIN 32745-1985 |
辦公技術和數據技術.拆信機.最低數據 |
Office machines; letter opening machines; minimum information to be specified |
| DIN 32747-1-1994 |
郵政和數據加工文件的連續處理系統.文獻.裝信機.第1部分:概念和分類 |
(Systems of continued processing of mail and data processing documents - Inserting machines - Part 1: Terms and classification) |
| DIN 32747-2-1994 |
郵政和數據加工文件連續處理系統.文獻.裝信機.第2部分:最簡說明 |
(Systems of continued processing of mail and data processing documents - Inserting machines - Part 2: Minimum information to be specified) |
| DIN 32748-1-1987 |
辦公技術和數據技術.工作崗位用計算機.概念和分類 |
(Office machines; personal computer; concepts and classification) |
| DIN 32748-2-1987 |
辦公技術和數據技術.工作崗位用計算機.最低要求 |
(Office machines; personal computers; minimum information to be specified) |
| DIN 32749-1984 |
辦公技術和數據技術.疊信機.最低要求 |
(Office machines; minimum information to be specified for letter folding machines) |
| DIN 32750-1-1994 |
辦公技術和數據技術.帶四盤磁帶的口授錄音機磁帶盒.卷帶筒傳動的磁帶盒.尺寸和特點 |
(Office machines; magnetic tape cassette for dictation equipment with magnetic tape 4; cassette spool spindle drive; dimensions and characteristics) |
| DIN 32750-2-1993 |
辦公機械.帶四盤磁帶的口授錄音機磁帶盒.主導軸驅動的磁帶盒.尺寸和特性 |
(Office machines; magnetic tape cassette for dictation equipment with magnetic tape 4; cassette for capstan drive; dimensions and characteristics) |
| DIN 32752-1-1995 |
辦公技術和數字技術.色帶的檢驗.第1部分:標準字符A的打印.反射系數測量計數值的測定 |
(Office machines - Testing of ink ribbons - Part 1: Creation of standard imprints A and measurement of the reflectometer-factor) |
| DIN 32752-2-1995 |
辦公技術和數字技術.色帶的檢驗.第2部分:一般的檢驗 |
(Office machines - Testing of ink ribbons - Part 2: General tests) |
| DIN 32752-3-1995 |
辦公技術和數字技術.色帶的檢驗.第6部分:標準字符B的打印和色彩傳送規定以及校正能力 |
(Office machines - Testing of inked ribbons - Part 3: Production of standard print B and determination of the colour transfer and ability for correction) |
| DIN 32755-1-1994 |
辦公技術和數字處理技術.色帶.13mm寬打字帶用直徑30mm的卷筒 |
(Office machines; inked ribbons; part 1: spool with 30 mm und 35 mm in diameter for ribbons of 13 mm width) |
| DIN 32755-2-1994 |
辦公技術和數字處理技術.色帶.第2部分:13mm和14.3mm寬色帶分別用直徑40mm和54mm的卷筒 |
(Office machines - Inked ribbons - Part 2: Spools with 40 mm and 54 mm in diameter for ribbons of 13 mm and 14,3 mm width) |
| DIN 32755-3-1994 |
辦公技術和數字處理技術.色帶.第3部分:13mm寬打字帶用直徑82mm的卷筒 |
(Office machines - Inked ribbons - Part 3: Spools with 82 mm in diameter for ribbons of 13 mm width) |
| DIN 32756-1995 |
辦公設備.改正帶、芯子和卷筒.術語、尺寸和結構 |
(Office machines - Correcting ribbons, cores, spools - Terms, dimensions, versions) |
| DIN 32757-1-1995 |
辦公技術和數據技術.信息載體撤消.第1部分:機器和設備的要求和檢驗 |
(Office machines - Destruction of information carriers - Part 1: Requirements and testing conditions for equipment and installations) |
| DIN 32757-2-1985 |
辦公技術和數據技術.信息載體撤消.機器和設備.最低要求 |
(Office machines; destruction of information media; machines and devices; minimum informations) |
| DIN 32758-1984 |
辦公技術和數據技術.計算機.微型電子計算機的鍵盤 |
(Office machines; calculating machines; keyboard for electronic pocket-calculators) |
| DIN 32780-100-2002 |
防護服裝.第100部分:頻率范圍為80MHz至1GHz的電磁場的防護.要求和試驗方法 |
(Protective clothing - Part 100: Protection against electromagnetic fields in the frequency range from 80 MHz to 1 GHz; Requirements and test methods) |
| DIN 32781-2005 |
防護服.農藥防護套服 |
|
| DIN 32786-1980 |
銀行業務.銀行存折上的磁條.磁道的構造和內容 |
(Bankdocuments; magnetic stripes on passbooks, data content for the track) |
| DIN 3280-1988 |
室內裝修用水管配件.公稱壓力10(帶錐形密封)螺紋連接管.概述 |
(Valves for domestic water supply; tapered unions up to PN 10; survey) |
| DIN 3281-1988 |
室內裝修用水管配件.公稱壓力10(帶錐形密封)吸水管.概述 |
(Valves for domestic water supply; tapered union nipples nominal pressure 10; survey) |
| DIN 3283-1988 |
室內裝修用水管配件.公稱壓力為10的螺紋連接管和吸水管.帶內螺紋的放水接管 |
(Valves for domestic water supply; nipples and unions nominal pressure 10; exhaust nipples with internal threads) |
| DIN 3284-1988 |
室內裝修用水管配件.公稱壓力為10的螺紋連接管和吸水管.帶外螺紋的放水接管 |
(Valves for domestic water supply; nipples and unions nominal pressure 10; exhaust nipples with external threads) |
| DIN 32840-1981 |
繪圖紙.天然高級透明紙 |
(Drawing papers and films; natural tracing paper) |
| DIN 3285-1988 |
室內裝修用水管配件.公稱壓力為10的螺紋連接管和吸水管.軟接管 |
(Valves for domestic water supply; nipples and unions nominal pressure 10; hose nipples) |
| DIN 32869-1-2005 |
技術產品文件.三維CAD(計算機輔助設計)模型.第1部分:表示要求 |
|
| DIN 32869-1998 |
技術產品文獻.三維CAD(計算機輔助設計)模式.圖示要求 |
(Technical product documentation - Three-dimensional CAD-models - Requirements for representation) |
| DIN 32869-2-2002 |
技術產品文獻.三維CAD(計算機輔助設計)模式.第2部分:屬性要求 |
(Technical product documentation - Three-dimensional CAD-models - Part 2: Requirements for attributes) |
| DIN 32869-3-2002 |
技術產品文獻.三維CAD(計算機輔助設計)模式.第3部分:特征 |
(Technical product documentation - Three-dimensional CAD-models - Part 3: Features) |
| DIN 3287-1988 |
室內裝修用水管配件.公稱壓力為10的螺紋連接管和吸水管.管路用螺紋接管 |
(Valves for domestic water supply; nipples and unions nominal pressure 10; threaded nipples for tubes) |
| DIN 32876-1 Bb.1-1999 |
幾何尺寸檢驗.電氣長度測量.概述.應用示例 |
(Verification of geometrical parameters - Electrical linear measurement - General comments and application, examples) |
| DIN 32876-1-1999 |
幾何參數的校驗.電子線性測定.第1部分:已測量數量的模擬接收.概念,要求,測試 |
Verification of geometrical parameters - Electrical linear measurement - Part 1: Analogue reception of the measured quantity; concepts, requirements, testing |
| DIN 32876-2-1999 |
幾何參數的校驗.電子線性測定.第2部分:已測量數量的數字接收.概念,要求,測試 |
(Verification of geometrical parameters - Electrical linear measurement - Part 2: Digital reception of the measured quantity; concepts, requirements, testing) |
| DIN 32877-2000 |
距離、輪廓和形式的光電測量 |
(Optoelectronic measurement of distance, profil and form) |
| DIN 32878-1993 |
帶絕對編碼器和增量編碼器的角位移測量系統 |
Angular displacement measuring systems with absolute and incremental encoders; concepts, requirements, testing |
| DIN 3289-1988 |
室內裝修用水管配件.公稱壓力為10的螺紋連接管和吸水管.螺紋錐形接管 |
Valves for domestic water supply; nipples and unions nominal pressure 10; threaded tapered union nipples |
| DIN 32891-1996 |
圓鋼鏈.質量等級2,不按量規檢驗 |
Round steel link chains - Grade 2, non-calibrated, tested |
| DIN 32895-1992 |
裝載車和撒肥機用鏈節 |
Round steel link chains for car loaders and manure spreaders, calibrated, tested |
| DIN 32896-1992 |
裝載車和撒肥機用鏈節 |
Connecting chain links for car loaders and manure spreaders |
| DIN 3291-1988 |
室內裝修用水管配件.公稱壓力為10的螺紋連接管和吸水管.螺紋連接軟管 |
Valves for domestic water supply; nipples and unions nominal pressure 10; threaded hose nipples |
| DIN 32911-1983 |
索道和雪撬運送乘客的圖形符號和信息銘牌 |
Graphic symbols and signs for information of the passengers of ropeways and ski-lifts |
| DIN 32912-1983 |
滑雪道上滑雪者注意事項的圖形符號和標牌 |
Graphic symbols and signs for information of the skiers on skiing slopes |
| DIN 32913-1993 |
越野滑雪道上滑雪者注意事項的圖形符號和標志牌 |
Cross country tracks; classification, basic graphic symbols and signs for the information of cross country skiers |
| DIN 32914-1983 |
山區鐵路.滑雪跑道和用銘牌.要求 |
Signs for mountain railways, skiing slopes and loipes; requirements |
| DIN 3292-1-1984 |
家用安裝設備配件.有色金屬連接螺母 |
(Fittings for domestic installation; nonferrous metal union nuts) |
| DIN 3292-2-1984 |
家用安裝設備配件.可鍛鑄鐵連接螺母 |
(Fittings for domestic installation; malleable cast iron union nuts) |
| DIN 32922-1997 |
冬季體育器械.遠距離滑雪者目標組的說明 |
(Wintersport equipment - Description of target groups for cross country skiers) |
| DIN 32926-1985 |
冬季體育器械.花樣滑冰裝備.概念.安全技術要求和檢驗 |
(Winter sports equipment; outfit for figure skating; concepts, safety requirements and testing) |
| DIN 32927-1986 |
冬季體育器械.冰球裝備.技術要求和檢驗 |
(Winter sports equipment; outfit for ice hockey skating; safety requirements and testing) |
| DIN 32928-1986 |
充氣式業余活動器械的打氣裝置.要求和檢驗 |
(Inflators for inflatable recreational articles; requirements and testing) |
| DIN 32929-1987 |
水上運動器械.允氣式船的槳和舵.安全技術要求和檢驗 |
(Water sports equipment; paddles and oars for inflatable boats; safety requirements and testing) |
| DIN 32931-1988 |
充氣式娛樂及運動器械的充排氣閉鎖 |
(Valves and stoppers for inflatable recreational articles; terminology, requirements, testing) |
| DIN 32934-2000 |
體操和運動設備.總圖 |
(Gymnastic and sport equipment - General plan) |
| DIN 32935-1987 |
家庭運動器械.不固定的粒力器械.壓力器械和體操器械 |
(Home sports equipment; mobile tension and pression training equipment, safety requirements, testing) |
| DIN 32937-1-2000 |
檢驗、測量和試驗設備的控制.第1部分:長度測量技術 |
(Control of inspection, measuring and test equipment - Part 1: Length measurement technique) |
| DIN 32937-2-2000 |
檢驗、測量和試驗設備的控制.第2部分:壓力測量技術 |
(Control of inspection, measuring and test equipment - Part 2: Pressure measurement technique) |
| DIN 32937-3-2000 |
檢驗、測量和試驗設備的控制.第3部分:溫度測量技術 |
(Control of inspection, measuring and test equipment - Part 3: Temperature measurement technique) |
| DIN 32937-4-2000 |
檢驗、測量和試驗設備的控制.第4部分:流量測量技術 |
(Control of inspection, measuring and test equipment - Part 4: Measurement of fluid flow technique) |
| DIN 32971-1985 |
對殘疾人的技術幫助；概念.分類特征 |
(Technical aids for the handicapped; concept, classifying characteristics) |
| DIN 32974-2000 |
公共交通區的聲信號.要求 |
(Acoustic signals in public traffic areas - Requirements) |
| DIN 32977-1-1992 |
適合殘疾人的設計.概念和普遍原則 |
(Adapted designing for disabled persons; definitions and general principles) |
| DIN 32980-1987 |
從8點式盲文至7位代碼的分配 |
(Adaptation of 8-dot-braille to 7-bit coded character set) |
| DIN 32981-2002 |
盲人和部分弱視人用交通信號的特殊裝置要求 |
(Special devices for blind and partially sighted persons on traffic signals - Requirements) |
| DIN 32982-1994 |
信息處理用8點盲文字符.識別.名稱.8位代碼歸類 |
(Information processing 8-dot-Braille graphic characters - Identifiers, names and assignation to 8-bit-codetables) |
| DIN 32983-1994 |
輪椅使用者和其他肢體殘疾人用車裝提升裝置.安全要求和檢驗 |
(Lifts installed on vehicles for wheelchairusers and for people restricted in their mobility - Safety requirements and testing) |
| DIN 32984-2000 |
位于公共交通區的地面指示器 |
(Ground surface indicators in public traffic areas) |
| DIN 32985 Berichtigung 1-2005 |
對DIN 32985-2004的勘誤 |
|
| DIN 32985-1998 |
使用輪椅的人和其他行動殘疾人用裝在輪椅上的斜面板.安全技術要求和檢驗 |
(Ramps installed on vehicles for wheelchair users and for people restricted in their mobility - Safety requirements and testing) |
| DIN 32985-2004 |
輪椅使用者和行動不便之人用的裝在運載工具上的斜坡道.安全要求和檢驗 |
|
| DIN 32990-1-1989 |
成本知識.機器制造業的成本文獻的概念 |
(Cost information; terminology of cost information documents in the machinebuilding industry) |
| DIN 32991-1 Bb.1-1990 |
成本.成本信息資料的編制原則.相對成本圖表舉例 |
(Costs information; principles of presentation; examples for relativ costs figures) |
| DIN 32991-1-1987 |
成本信息.成本信息資料.編制原理 |
(Costs informations; costs information-documents; principles of presentation) |
| DIN 32992-1-1989 |
成本知識.計算原理.成本核算的方式方法 |
(Cost information; calculation principles; types and methods of calculation) |
| DIN 32992-2-1993 |
成本知識.計算原理.簡略核算法 |
(Costs information; calculation principles; methods short calculation) |
| DIN 32992-3-1987 |
成本信息.計算基本原理.相對費用數值的推斷 |
(Costs inforamtions; principles of calculation; determination of figures for relative costs) |
| DIN 3319-2002 |
錐形方頭轂孔彎曲手輪 |
(Hand-wheels, dished - Hub hole with tapered square) |
| DIN 332-1-1986 |
60°中心孔.R、A、B和C型 |
(60?centre holes; types R, A, B, and C) |
| DIN 332-2-1983 |
電機軸端用60度帶螺紋的中心孔 |
(Center holes 60 with thread for shaft ends for rotating electrical machines) |
| DIN 332-4-1990 |
鐵路車輛的輪對軸中心孔 |
(Centre holes for rail vehicles axles) |
| DIN 332-7-1982 |
機床.60°中心孔.測量方法 |
(Machine tools; 60 centre holes; dimensioning) |
| DIN 332-8-1979 |
90°中心孔.S型.尺寸.測量方法 |
(Centre holes 90, form S; dimensions, determination process) |
| DIN 3321-1987 |
消防栓的認可證檢驗和要求 |
(Requirements and acceptance tests for hydrants) |
| DIN 333-1986 |
60°中心鉆.R、A和B型 |
(60?centre drills; types R, A, and B) |
| DIN 3334-1968 |
帶法蘭接頭的加熱混合器.三通混合器.四通混合器.公稱壓力6.最高溫度110℃.結構尺寸 |
(Mixing valves for heating installations with flanges, three way mixing valves, four way mixing valves, ND 6 max. 110 C; installation dimensions) |
| DIN 3335-1968 |
帶套管接頭的加熱混合器.三通混合器.四通混合器.公稱壓力6.最高溫度110℃.結構尺寸 |
(Mixing valves for heating installations with screwed ends; three way mixing valves, four way mixing valves, ND 6 max. 110 C, installation dimensions) |
| DIN 3336-1968 |
焊接的加熱混合器.三通混合器.四通混合器.公稱壓力6.最高溫度110℃.結構尺寸 |
(Mixing valves for heating installations with welding neck ends; three way mixing valves, four way mixing valves, ND 6 max. 110 C, installation dimensions) |
| DIN 3338-1987 |
管件的旋轉傳動連接.瓜形聯管節的結合尺寸(C形) |
(Multi-turn valve actuator attachment; dimensions of type C driving components) |
| DIN 334-1979 |
60°埋頭鉆 |
(Countersinks 60) |
| DIN 33400 Bb.1-1978 |
勞動科學知識工作系統的形式；高度可調工作臺示例 |
(Design of working systems by ergonomics; example for working platform adjustable in height) |
| DIN 33402-2 Bb.1-1984 |
人體尺寸；數值；人體尺寸的實際應用 |
(Human body dimensions; values; application of body dimensions in practice) |
| DIN 33402-2-1986 |
人體尺寸；數值 |
(Human body dimensions; values) |
| DIN 33402-2-2005 |
人類功效學.人體尺寸:第2部分:數值 |
|
| DIN 33402-3-1984 |
人體尺寸；在各種姿勢和運動時的活動空間 |
(Human body dimensions; movement room at different normal positions and movements) |
| DIN 33403-2-2000 |
工作場地及其環境的氣候.第2部分:氣候?qū)θ藛T熱平衡的影響 |
(Climate at the workplace and in its environments - Part 2: Effect of the climate on the heat balance of human beings) |
| DIN 33403-3-2001 |
工作場所及其環境中的氣候.第3部分:基于選擇的氣候指數評價熱工作場所的氣候 |
(Climate at the workplace and its environments - Part 3: Assessment of the climate in the warm and hot working areas based on selected climate indices) |
| DIN 33403-5-1997 |
工作場地和工作環境的氣候.第5部分:低溫工作場地的人類工程學設計 |
(Climate at the workplace and its environments - Teil 5: Ergonomic design of cold workplaces) |
| DIN 33404-3-1982 |
工作場所用報警信號.聲響報警信號.統一的緊急呼叫信號.安全技術要求.檢驗 |
(Danger signals for workplaces; auditory danger signals; unified emergency signal; technical requirements of safety, testing) |
| DIN 33406-1988 |
生產區域工作地的尺寸.概念.工作埸地類型.工作埸地尺寸 |
(Workplace dimensions in production; terminology, types and dimensions of workplaces) |
| DIN 33407-1980 |
工作分析.準則 |
(Analysis of work; criterias) |
| DIN 33408-1 Bb.1-1987 |
座位用人體外形模式.應用示例 |
(Body templates for seats of all kinds; application examples) |
| DIN 33408-1-1987 |
座位用人體外形模式 |
(Body templates for seats of all kinds) |
| DIN 33409-1983 |
符合安全條例的勞動作業組織.指揮手勢 |
(Safety in the organization of work; hand signs for guiding and directing purposes) |
| DIN 3341-1989 |
柱塞空氣壓縮機用圓盤閥.吸氣閥.壓力閥.主要尺寸.材料.安裝 |
(Plate valves for displacement compressors; suction valves, discharge valves; main dimensions, materials, installation) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com