標準號 |
中文名稱 |
英文名稱 |
| DIN 50450-3-1991 |
半導體工藝材料的檢驗.載運氣體和混合氣體中雜質的測定.用火焰電離檢驗測器測定.氫.氧.氮.氬.氦中的甲烷雜 |
(Testing of materials for semiconductor technology; determination of impurities in carrier gases and doping gases; determination of methane impurity in H, O, N, Ar and He by using a flame ionization detector (FID)) |
| DIN 50450-4-1993 |
半導體工藝材料的檢驗.載運氣體和混合氣體中雜質的測定.用氣體色譜法測定氮氣中C1C3碳氫化合物 |
(Testing of materials for semiconductor technology; determination of impurities in carrier gases and dopant gases; determination of C-C-hydrocarbons in nitrogen by gas-chromatography) |
| DIN 50450-5-1994 |
半導體工藝材料的檢驗.載氣和摻雜氣體中雜質的測定.用五氧化二磷件測定氣相氯化氫中的微量水 |
(Testing of materials for semiconductor technology; determination of impurities in carrier gases and dopant gases; determination of water traces in gaseous hydrogen chloride by a diphosphorus pentoxide cell) |
| DIN 50450-6-1994 |
半導體工藝材料的檢驗.載氣和摻雜氣體中雜質的測定.用氣體色譜法和火焰電離探測器測定氮氣中CO和CO2 |
(Testing of materials for semiconductor technology; determination of impurities in carrier gases and doping gases; determination of CO and CO in nitrogen by gaschromatographie) |
| DIN 50450-7-1995 |
半導體工藝材料的檢驗.載氣和摻雜氣體中雜質的測定.第7部分:用氣體色譜法和還原氣體探測器測定氮氣中CO和H2 |
(Testing of materials for semiconductor technology - Determination of impurities in carrier gases and dopant gases - Part 7: Determination of CO and H in nitrogen by gaschromatography and reduction gasdetector) |
| DIN 50450-8-2000 |
半導體工藝材料的檢驗.載氣和摻雜氣體中雜質的測定.第8部分:用激光粒子計數器測定流動氮中粒子數的濃度 |
(Testing of materials for semiconductor technology - Determination of impurities in carrier gases and dopant gases - Part 8: Determination of the concentration of the particle number in flowing nitrogen using laser particle counter) |
| DIN 50450-9-2003 |
半導體工藝材料的檢驗.載氣和摻雜氣體中雜質的測定.第9部分:用氣相色譜法測定氣態氯化氫中氧、氮、一氧化碳 |
(Testing of materials for semiconductor technology - Determination of impurities in carrier gases and dopant gases - Part 9: Determination of oxygen, nitrogen, carbonmonoxide, carbondioxide, hydrogen and C-C-hydrocarbons in gaseous hydrogen chloride by ga |
| DIN 50451-1-2003 |
半導體工藝用材料檢驗.液體中痕量素的測定.用原子吸收光譜測定法測定硝酸溶劑內的銀、金、鈣、銅、鐵、鉀 |
(Testing of materials for semiconductor technology - Determination of trace elements in liquids - Part 1: Silver (Ag), gold (Au), calcium (Ca), copper (Cu), iron (Fe), potassium (K) and sodium (Na) in nitric acid by AAS) |
| DIN 50451-2-2003 |
半導體工藝用材料的檢驗.液體中痕量素的測定.第2部分:用等離子感應的發射分光光度測定法測定氫氟酸中的鈷 |
(Testing of materials for semiconductor technology - Determination of trace elements in liquids - Part 2: Calcium (Ca), cobalt (Co), chromium (Cr), copper (Cu), Iron (Fe), nickel (Ni) and zinc (Zn) in hydrofluoric acid with plasma-induced emission spectro |
| DIN 50451-3-2003 |
半導體工藝用材料的檢驗.液體中痕量素的測定.第3部分:用電感耦合等離子體質譜法測定硝酸中鋁(AL)、鈷(Co) |
(Testing of materials for semiconductor technology - Determination of traces of elements in liquids - Part 3: Aluminium (Al), cobalt (Co), copper (Cu), sodium (Na), nickel (Ni) and zinc (Zn) in nitric acid by ICP-MS) |
| DIN 50452-2-1991 |
半導體工藝材料的檢驗.液體中顆粒分析方法.用光學粒子計數器測定顆粒 |
(Testing of materials for semiconductor technology; test method for particle analysis in liquids; determination of particles with optical particle counters) |
| DIN 50452-3-1995 |
半導體工藝材料的檢驗.液體中顆粒分析方法.第3部分:光學粒子計數器校正 |
(Testing of materials for semiconductor technology - Test method for particle analysis in liquids - Part 3: Calibration of optical particle counters) |
| DIN 50453-1-1990 |
半導體工藝材料的檢驗.蝕刻混合劑浸蝕率的測定.單晶硅.測重法 |
(Testing of materials for semiconductor technology; determination of etch rates of etching mixtures; silicium monocrystals; gravimetric method) |
| DIN 50453-2-1990 |
半導體工藝材料的檢驗.蝕刻混合劑浸蝕率的測定.二氧化硅涂層.光學法 |
(Testing of materials for semiconductor technology; determination of etch rates of etching mixtures; silicium-dioxid coating; optical method) |
| DIN 50453-3-2001 |
半導體工藝材料的試驗.蝕刻混合劑浸蝕率的測定.第3部分:鋁.測重法 |
(Testing of materials for semiconductor technology - Determination of etch rates of etching mixtures - Part 3: Aluminium, gravimetric method) |
| DIN 50454-1-2000 |
半導體工藝材料的檢驗.Ⅲ-Ⅴ化合物半導體單晶中錯位的測定.第1部分:砷化鎵 |
(Testing of materials for semiconductor technology - Determination of dislocations in monocrystals of III-V-compound semi-conductors - Part 1: Gallium arsenide) |
| DIN 50454-2-1994 |
半導體工藝材料的檢驗.Ⅲ-Ⅴ化合物半導體單晶中錯位腐蝕班點密度的測定.第2部分:銦磷化物 |
(Testing of materials for semiconductor technology - Determination of the dislocation etch pits density in monocrystals of III-V-compound semiconductors - Part 2: Indium phosphide) |
| DIN 50454-3-1994 |
半導體工藝材料的檢驗.Ⅲ-Ⅴ化合物半導體單晶中錯位腐蝕班點密度的測定.第3部分:鎵磷化物 |
(Testing of materials for semiconductor technology - Determination of the dislocation etch pits density in monocrystals of III-V-compound semiconductors - Part 3: Gallium phosphide) |
| DIN 50455-1-1991 |
半導體工藝材料的檢驗.表示光敏抗蝕劑特性的方法.用光學測量法測定層厚 |
(Testing of materials for semiconductor technology; methods for characterizing photoresists; determination of coating thickness with optical methods) |
| DIN 50455-2-1999 |
半導體工藝材料的檢驗.光致抗蝕劑表示特性的方法.第2部分:正極光致抗蝕劑的光敏度的測定 |
(Testing of materials for semiconductor technology - Methods for the characterisation photoresists - Part 2: Determination of photosensitivity of positive photoresists) |
| DIN 50456-2-1995 |
半導體工藝材料的試驗.電子件用模壓材料的特性表示法.第2部分:用壓力萃取法測定電離子雜質 |
(Testing of materials for semiconductor technology - Method for the characterisation of moulding compounds for electronic components - Part 2: Determination of ionic impurities using pressure cooker test) |
| DIN 50456-3-1999 |
半導體工藝材料的檢驗.電子件外封裝用壓制材料的特性表示法.第3部分:陽離子雜質的測定 |
(Testing of materials for semiconductor technology - Method for the characterisation of moulding compounds for electronic components - Part 3: Determination of cationic impurities) |
| DIN 50457-1-1999 |
半導體工藝材料的試驗.用濕式化學法測定添加氣體混合劑中成份的體積構成.第1部分:氫-乙硼烷混合物中的乙硼 |
(Testing of materials for semiconductor technology - Determination of the volume fraction of components in dopant gas mixtures by wet-chemical methods - Part 1: Diborane in hydrogen diborane mixtures) |
| DIN 50457-2-1999 |
半導體工藝材料的試驗.用濕式化學法測定添加氣體混合劑中成份的體積構成.第2部分:氮-磷混合物中的磷 |
(Testing of materials for semiconductor technology - Determination of the volume fraction of components in dopant gas mixtures by wet-chemical methods - Part 2: Phosphine in nitrogen phosphine mixtures) |
| DIN 5046-1983 |
肉和其它食品用懸鉤.S鉤 |
(Hooks for meat and other foods; S-hook) |
| DIN 50460-1988 |
鋼材的檢驗.在交變磁場中測定電工網片的磁性.概述.概念.檢驗方法的依據 |
(Determination of magnetic properties of soft magnetic materials; general, terminology and principles of measurement) |
| DIN 50463-1985 |
鋼的檢驗.硅鐵合金制硅鋼片厚度的測定 |
(Testing of steel; determination of the density of iron/silicon alloy magnetic sheet) |
| DIN 5047-1983 |
肉和其它食品用懸鉤.管軌-滑動鉤 |
(Hooks for meat and other food; tubular track sliding hook) |
| DIN 50470-1980 |
永磁材料的檢驗.測定單磁軛的退磁曲線和永磁導磁率.電感應法 |
(Testing of permanent magnet materials; Determination of the demagnetization curve and permanent permeability in a yoke; Inductive method) |
| DIN 50472-1981 |
永久磁鐵的檢驗.在工作范圍內測定磁通量 |
(Testing of permanent magnets; determination of the magnetic flux values in the working range) |
| DIN 5048-1984 |
肉和其它食品用懸鉤.管軌-滾鉤 |
(Hooks for meat and other food; tubular track roller hook) |
| DIN 505-1973 |
傳動件.用兩個螺釘緊固的帶蓋軸承和軸承套 |
(Driving components; cap-bearings; split-bearings; fastened with 2 screws) |
| DIN 505-2004 |
傳動件.用兩個螺釘緊固的帶蓋軸承和無蓋軸承 |
|
| DIN 5050-1-1992 |
日光浴室和室內太陽燈.測量方法.型號分類.標志 |
(Solariums and domestic sun lamps; measuring, marking, classification) |
| DIN 5050-2-1998 |
日光照射和室內太陽燈.第2部分:使用和運轉 |
(Solariums and domestic sun lamps - Part 2: Application and operation) |
| DIN 50502-1998 |
銅和銅含量的化學分析.含量至少為99.90%的非合金銅中銅含量的測定 |
(Chemical analysis of copper and copper alloys - Determination of copper in unalloyed copper containing not less than 99,90 % of copper) |
| DIN 50503-1998 |
銅和銅合金的化學分析.銅塑性合金和銅鑄合金中銅含量的測定 |
(Chemical analysis of copper and copper alloys - Determination of copper in wrought and cast copper alloys) |
| DIN 50504-1973 |
銅和銅合金的化學分析.含鐵量最高為0.4%的銅和銅使金中的鐵的測定.光度法 |
(Chemical analysis of copper and copper alloys; photometric determination of iron in copper and copper alloys containing 0,4 % of iron at maximum) |
| DIN 50505-1973 |
銅和銅合金的化學分析.用光測法測定含錳量最高為6%的銅合金中的錳 |
(Chemical analysis for copper and copper alloys; photometric determination of manganese in copper alloys containing 6 % of manganese at maximum) |
| DIN 50506-1973 |
銅和銅合金的化學分析.含鎳量最高為2.5%的銅合金中的鎳的測定.光度法 |
(Chemical analysis of copper and copper alloys; photometric determination of nickel in copper alloys containing 2,5 % of nickel at maximum) |
| DIN 50507-1977 |
銅和銅合金的化學分析.鉛含量的測定.萃取滴定法 |
(Chemical analysis of copper and copper alloys; determination of lead, extracting-titration method) |
| DIN 50508-1977 |
銅和銅合金的化學分析.合金素錫的測定.容量分析法 |
(Chemical analysis of copper and copper alloys; determination of tin as alloying element, volumetric method) |
| DIN 50509-1977 |
銅和銅合金的化學分析.用容量分析法測定銅合金中的鋁含量 |
(Chemical analysis of copper and copper alloys; determination of the aluminium content of copper alloys, volumetric method) |
| DIN 50510-1980 |
銅和銅合金的化學分析.用光度測定法測定銅和銅塑性合金中的砷含量 |
(Chemical analysis of copper and copper alloys; determination of arsenic in copper and copper alloys, photometric method) |
| DIN 50550-1985 |
鋅和鋅合金.用原子吸收光譜法測定銦和鉈的含量 |
(Zinc and zinc alloys; determination of indium and thallium by atomic absorption spectrometry) |
| DIN 5059-1-1992 |
包裝材料.金屬和塑料軟管.金屬軟管.管頸.管肩 |
(Packaging; metal and plastic tubes; metal tubes; tube nozzles, tube shoulders) |
| DIN 5059-2-1990 |
包裝材料.金屬和塑料軟管.塑料軟管.軟管嘴 |
(Packaging; metal and plastic tubes; plastic tubes; tube nozzles) |
| DIN 506-1973 |
傳動件.用四個螺釘緊固的帶蓋軸承和軸承套 |
(Driving components; cap-bearings; split-bearings; fastened with 4 screws) |
| DIN 506-2004 |
傳動件.用四個螺釘緊固的帶蓋軸承和無蓋軸承 |
|
| DIN 5060-1985 |
包裝材料.管殼封口端 |
(Means of packaging; closures for tube ends) |
| DIN 50600-1980 |
金屬材料的檢驗.金相結構圖.圖象尺寸及幅面 |
(Testing of metallic materials; Metallographic Micrographs; Picture scales and formats) |
| DIN 50601-1985 |
金相檢驗方法.鋼和鐵材料的純鐵體和奧氏體粒度的測定 |
(Metallographic examination; determination of the ferritic or austenitic grain size of steel and ferrous materials) |
| DIN 50602-1985 |
金相檢驗方法.用相圖對優質鋼中的非金屬雜質作顯微鏡檢查 |
(Metallographic examination; microscopic examination of special steels using standard diagrams to assess the content of non-metallic inclusions) |
| DIN 5065-1987 |
包裝材料.金屬及塑料軟管用塑料封口端 |
(Packaging; plastic closures for metal and plastic tubes) |
| DIN 5066-1980 |
包裝輔助材料.裝飾外罩.尺寸 |
(Auxiliary means of packaging; fancy caps, dimensions) |
| DIN 5067-1998 |
包裝容器.棱面圓型寬頸包裝玻璃容器 |
(Means of packaging - Round wide-mouthed glass containers, with facets) |
| DIN 5068-1998 |
包裝容器.帶凹溝的圓大口玻璃容器 |
(Means of packaging - Round wide-mouthed glass containers, with recessed grip) |
| DIN 5079-1-1992 |
包裝材料.圓柱形鋁軟管包裝用硬紙板或瓦紙板盒子 |
(Packaging; boxes manufactured from solid fibre-board or corrugated board for cylindrical aluminium tubes) |
| DIN 5079-2-1990 |
包裝材料.錐型鋁管包裝用瓦愣紙板制折疊盒 |
(Packaging; folding boxes made of corrugated board for conical aluminium tubes) |
| DIN 508-2002 |
T型槽用螺母 |
(Nuts for T-slots) |
| DIN 5080-1978 |
家用罐頭玻璃杯和玻璃瓶.橡膠密封環 |
(Preserving jars and bottles for domestic purposes; rubber seal rings) |
| DIN 50898-2005 |
電鍍覆層.有輔助處理的鋁和鋁合金的電鍍覆層.要求和試驗方法 |
|
| DIN 509-1998 |
退刀槽.類型和尺寸 |
(Relief grooves - Types and dimensions) |
| DIN 5090-1997 |
包裝容器.包裝瓶 |
(Means of packaging - Bottles for packaging) |
| DIN 50900-2-2002 |
金屬的腐蝕.術語.第2部分:電化學術語 |
(Corrosion of metals - Terms - Part 2: Electrochemical terms) |
| DIN 50902-1994 |
金屬防腐層.概念.方法.表面準備 |
(Coatings for corrosion protection of metals; vocabulary, processes and surface preparation) |
| DIN 50903-1967 |
金屬涂層.氣孔夾雜.氣泡與裂紋.概念 |
(Metallic Coatings; Pores, Inclusions, Blisters and Cracks, Definitions) |
| DIN 50905-1-1987 |
金屬腐蝕.腐蝕檢查.原則 |
(Corrosion of metals; corrosion testing; principles) |
| DIN 50905-2-1987 |
金屬腐蝕.腐蝕檢查.均勻平面腐蝕的腐蝕量 |
(Corrosion of metals; corrosion testing; corrosion characteristics under uniform corrosion attack) |
| DIN 50905-3-1987 |
金屬腐蝕.腐蝕檢查.無機械負荷的不均勻及局部腐蝕的腐蝕量 |
(Corrosion of metals; corrosion testing; corrosion characteristics under nonuniform and localized corrosion attack without mechanical stress) |
| DIN 50905-4-1987 |
金屬腐蝕.腐蝕檢查.在實驗室液體中無機械負荷的情況下進行化學腐蝕試驗的方法 |
(Corrosion of metals; corrosion testing; corrosion testing in liquids under laboratory conditions without mechanical stress) |
| DIN 50908-1993 |
鍛鋁合金耐應力裂縫腐蝕檢驗.H22 |
(Testing the resistance of aluminium wrought alloys to stress corrosion cracking) |
| DIN 50915-1993 |
在含硝酸鹽侵蝕劑中非合金鋼和低合金鋼耐晶間應力裂紋腐蝕公休檢驗.焊接和非焊接材料 |
(Testing the resistance of unalloyed and low alloy steels to intergranular stress corrosion cracking by attack of nitrate medium; welded and unwelded materials) |
| DIN 50916-1-1976 |
銅合金的檢驗.用氨進行的應力裂紋腐蝕試驗.管材.棒材和型材的檢驗 |
(Testing of copper alloys; stress corrosion cracking test in ammonia, testing of tubes, rods and profiles) |
| DIN 50916-2-1985 |
銅合金的檢驗.用氨作應力裂縫腐蝕檢驗.構件的檢驗 |
(Testing of copper alloys; stress corrosion cracking test using ammonia; testing of components) |
| DIN 50918-1978 |
金屬的腐蝕.電化學腐蝕試驗 |
(Corrosion of metals; electrochemical corrosion tests) |
| DIN 50919-1984 |
金屬的腐蝕.電解溶液里接觸腐蝕的試驗 |
(Corrosion of metal; investigations of galvanic corrosion in electrolytic solutions) |
| DIN 50920-1-1985 |
金屬的腐蝕.通電液體里的腐蝕試驗.概況 |
(Corrosion of metals; corrosion testing in flowing liquids; general) |
| DIN 50922-1985 |
金屬的腐蝕.金屬材料耐應力裂紋腐蝕性能的檢驗.概況 |
(Corrosion of metals; testing the resistance of metallic materials to stress corrosion cracking; general) |
| DIN 50923-2004 |
電鍍層.鐵或鋼上帶有機涂層的鋅或鋅合金涂層的雙涂層 |
|
| DIN 50925-1992 |
金屬腐蝕.敷設在地下的設備陰極防腐蝕作用的驗證 |
(Corrosion of metals; proof of effectiveness of cathodic corrosion protection of underground installations) |
| DIN 50926-1992 |
金屬腐蝕.非合金鋼制燃料油罐底部用外部電流的陰極防腐蝕 |
(Corrosion of metals; cathodic corrosion protection with impressed current of the bottom area of fuel oil tanks of unalloyed steel) |
| DIN 50927-1985 |
對儀器.容器和管道內表面電化學防腐的計劃與應用（內部防護） |
(Planning and application of electrochemical corrosion protection of internal surfaces of apparatus, containers and tubes (internal protection)) |
| DIN 50928-1985 |
金屬腐蝕.涂層金屬材料在含水介質腐蝕下的防腐檢驗和評價 |
(Corrosion of metals; testing and assessment of the corrosion protection of coated metallic materials in contact with aqueous corrosive agents) |
| DIN 50929-1-1985 |
金屬腐蝕.在外部腐蝕條件下金屬材料的腐蝕概率.總則 |
(Corrosion of metals; probability of corrosion of metallic materials when subject to corrosion from the outside; general) |
| DIN 50929-2-1985 |
金屬腐蝕.在外部腐蝕條件下金屬材料的腐蝕概率.建筑物內部裝備部分 |
(Corrosion of metals; probability of corrosion of metallic materials when subject to corrosion from the outside; service components inside buildings) |
| DIN 50929-3-1985 |
金屬腐蝕.在外部腐蝕條件下金屬材料的腐蝕概率.在土壤和水中的管道和構件 |
(Corrosion of metals; probability of corrosion of metallic materials when subject to corrosion from the outside; buried and underwater pipelines and structural components) |
| DIN 50930-1-1993 |
金屬的腐蝕.由于管槽和裝置內的水造成的內部金屬腐蝕.概述 |
(Corrosion of metalls; corrosion of metallic materials under corrosion load by water inside of tubes, tanks and apparatus; generales) |
| DIN 50930-2-1993 |
金屬的腐蝕.由于管槽和裝置內的水造成的內部金屬腐蝕.非合金和低合金鐵材料腐蝕可能性能判定 |
(Corrosion of metals; corrosion of metallic materials under corrosion load by water inside of tubes, tanks and apparatus; evaluation of the corrosion likelihood of unalloyed and low-alloy iron materials) |
| DIN 50930-3-1993 |
金屬的腐蝕.由于管槽和裝置內的水造成的內部金屬腐蝕.熱鍍鋅鐵材料腐蝕可能性判定 |
(Corrosion of metals; corrosion of metallic materials under corrosion load by water inside of tubes, tanks and apparatus; evaluation of the corrosion likelihood of hot dip iron materials) |
| DIN 50930-4-1993 |
金屬的腐蝕.由于管槽和裝置內的水造成的內部金屬腐蝕.不銹鋼腐蝕可能性判定 |
(Corrosion of metals; corrosion of metallic materials under corrosion load by water inside of tubes, tanks and apparatus; evaluation of the corrosion likelihood of stainless steels) |
| DIN 50930-5-1993 |
金屬的腐蝕.由于管槽和裝置內的水造成的內部金屬腐蝕.銅和銅材腐蝕可能性判定 |
(Corrosion of metals; corrosion of metallic materials under corrosion load by water inside of tubes, tanks and apparatus; evaluation of the corrosion likelihood of copper and copper alloys) |
| DIN 50930-6-2001 |
金屬的腐蝕.由于管、槽和裝置內的水造成的金屬材料腐蝕.第6部分:飲用水成分的影響 |
(Corrosion of metals - Corrosion of metallic materials under corrosion load by water inside of tubes, tanks and apparatus - Part 6: Influence of the composition of drinking water) |
| DIN 50931-1-1999 |
金屬腐蝕.飲用水的腐蝕試驗.第1部分:飲用水組分改變的試驗 |
(Corrosion of metals - Corrosion tests of drinking water - Part 1: Testing of change of the composition of drinking water) |
| DIN 50933-1987 |
涂層厚度測量.用帶探測器的差動測量器測量涂層厚度 |
(Measurement of coating thickness by differential measurement using a stylus instrument) |
| DIN 50934-1-2000 |
金屬的腐蝕.水處理設備腐蝕防護效果的評價方法.第1部分:總則 |
(Corrosion of metals - Methods for evaluation of efficiency of water treatment apparatus for corrosion protection - Part 1: General) |
| DIN 50934-2-2000 |
金屬的腐蝕.水處理設備腐蝕防護效果的評價方法.第2部分:飲用水減低腐蝕產品散發的設備 |
(Corrosion of metals - Methods for evaluation of efficiency of water treatment apparatus for corrosion protection - Part 2: Apparatus for decreasing of emission of corrosion products to drinking water) |
| DIN 50934-3-2000 |
金屬的腐蝕.腐蝕防護用水處理儀器效果的評定方法.第3部分:結垢的水裝置中清除腐蝕物的現場腐蝕試驗 |
(Corrosion of metals - Methods for evaluation of efficiency of water treatment apparatus for corrosion protection - Part 3: Field corrosion test for removal of corrosion products in incrusted water installations) |
| DIN 50934-4-2000 |
金屬的腐蝕.水處理設備腐蝕防護效果的評價方法.第4部分:在結水銹的水安裝中腐蝕產品去除的試驗室腐蝕試驗 |
(Corrosion of metals - Methods for evaluation of efficiency of water treatment apparatus for corrosion protection - Part 4: Laboratory corrosion test for removal of corrosion products in incrusted water installations) |
| DIN 50938-2000 |
鐵和鋼的黑色氧化涂層.要求和試驗方法 |
(Black oxide coatings on iron or steel - Requirements and test methods) |
| DIN 50939-1996 |
防腐蝕.鋁的鉻酸鈍化處理.規則和檢驗方法 |
(Corrosion protection - Chromating of aluminium - Principles and methods of test) |
| DIN 50957-1978 |
電鍍槽檢驗.用Hull電解槽的電鍍檢驗.一般原則 |
(Testing of electrolytes used for electro-deposited metallic coatings; test involving electro-deposition of a coating in the Hull cell, general principles) |
| DIN 50958-2001 |
電鍍層.按改良的柯洛特考得(CORRODKOTE)法對鍍鉻物體進行的腐蝕檢驗 |
(Electroplated coatings - Modified Corrodkote corrosion test (mod. Corr-Test)) |
| DIN 50959-1982 |
電鍍層.鐵材料上的電鍍層在各種氣候條件下的腐蝕狀況說明 |
(Electrodeposited coatings; corrosive resistance of electrodeposited coatings on iron and steel under different climatic conditions) |
| DIN 50960-1-1998 |
電鍍層.技術資料中的標記 |
(Electroplated coatings - Designation in technical documents) |
| DIN 50960-2-1998 |
電鍍涂層.第2部分:圖紙說明 |
(Electroplated coatings - Part 2: Indications on technical drawings) |
| DIN 50961-2000 |
電鍍層.鋼鐵材料上鍍鋅層.術語、試驗和防腐蝕 |
(Electroplated coatings - Zinc coatings on iron and steel - Terms, testing and corrosion resistance) |
| DIN 50962-1998 |
電鍍涂層.鐵制工件上鉻酸鈍化鋅合金涂層 |
(Electrodeposited coatings - Chromated coatings of zinc alloys on iron and steel) |
| DIN 50965-2000 |
電鍍層.鋼鐵和銅及銅合金上的錫鍍層 |
(Electroplated coatings - Tin-coatings on iron steel and on copper and copper alloys) |
| DIN 50966-1988 |
電鍍層.工程用金屬面上自動催化分離的鎳.磷鍍層 |
(Electroplated coatings; autocatalytic nickel-phosphorus coatings on metal in technical applications) |
| DIN 50967-2005 |
金屬鍍層.鋁及鋁合金上的鎳和鎳鉻電鍍層 |
|
| DIN 50969-1990 |
高強度結構鋼部件耐氫感應脆性斷裂性.用支柱試驗和預防性測量法進行檢測 |
(Resistance of high-strength structural steel components against hydrogen-induced brittle fracture; detection by bracing test and preventive measures) |
| DIN 5097-1999 |
包裝輔助材料.瓶子上的夾塞 |
(Auxiliary packaging means - Clipclocks for bottles) |
| DIN 50970-1995 |
電解鍍層.鎳浴用的鎳鹽.要求和檢驗 |
(Electroplated coatings - Nickel chemicals for nickel baths - Requirements and testing) |
| DIN 50971-1996 |
電解鍍層.氰化槽和/或鹼化槽用化學材料.要求和檢驗 |
(Electroplated coatings - Chemicals for cyanic and/or alkaline electroplating baths - Requirements and testing) |
| DIN 50972-1995 |
電解鍍層.銅槽用的硫酸銅.要求和檢驗 |
(Electroplated coatings - Copper sulphate for copper baths - Requirements and testing) |
| DIN 50973-1984 |
電解鍍層.電鍍槽用酸.要求 |
(Electroplated coatings; acids for electroplating; requirements) |
| DIN 50977-1993 |
鍍層厚度的測量.對連續運動的鋼帶金屬鍍層厚度的無接觸測量 |
(Measurement of coating thickness; non contact measurement of coating thickness on continuously moving objects) |
| DIN 50977-2005 |
測量覆層厚度.連續運動物體上覆層厚度的非接觸測量 |
|
| DIN 50978-1985 |
金屬鍍層的檢驗.熱鍍鋅產生的涂層附著性能 |
(Testing of metallic coatings; adherence of hot-dip zinc coatings) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com