標準號 |
中文名稱 |
英文名稱 |
| DIN 46200-1977 |
１·６ＫＡ以下導電連接螺栓.電流強度的配置和設計 |
(Current carrying connection bolts up to 1600 A; design and assignment of current intensities) |
| DIN 46202-1987 |
52KV以上配電開關和控制器.儀表用互感器.以及避雷用連接螺栓 |
(Terminal studs for switchgear and controlgear, instrument transformers and surge arresters of 52 kV and above) |
| DIN 46206-1-1985 |
電氣設備的連接.70m2以下圓形銅導線連接的扁端子 |
(Terminals for electrical equipment; flat blade terminals for the connection of round copper conductors up to 70 mm) |
| DIN 46206-2-1971 |
電氣設備的連接.大于或等于４０Ａ平面連接.主要尺寸和配置 |
(Supply-terminals for electrical equipment40 A; connections with rectangular cross-section, basic dimensions and coordination) |
| DIN 46206-3-1983 |
電氣設備的連接.52kV以上設備的平面連接.主要尺寸.配置 |
(Terminals for electrical equipment; flat terminals for equipment from and above 52 kV; basic dimensions, coordination) |
| DIN 46207-1971 |
電氣設備的連接.插孔與開口連接.主要尺寸和配置 |
(Connections for Electrical Devices; Sleeve Terminals and Side Opening Sleeve Terminals; Principal Dimensions and Correlation) |
| DIN 4621-1995 |
疊板彈簧.彈簧夾 |
(Laminated leaf springs - Alignment clips) |
| DIN 46211-1965 |
銅導線用沖壓電纜終端孔 |
(Stamped Cable Sockets for Copper Conductors) |
| DIN 46215-1976 |
沖壓帶孔焊片 |
(Stamped solder lugs, with hole) |
| DIN 46216-1976 |
沖壓帶槽焊片 |
(Stamped solder lugs, with slot) |
| DIN 46218-1966 |
沖孔線端連接耳.冕狀 |
(Stamped metal rings for conductors) |
| DIN 46220-1965 |
銅導線用沖壓件.澆鑄的直式電纜套（端子） |
(Cable sockets, hot pressed, cast for copper conductors) |
| DIN 46221-1965 |
銅導線用沖壓件.澆鑄的角式電纜終端 |
(Angle sockets, hot pressed, cast for copper conductors) |
| DIN 46223-1973 |
圓形端子 |
(Round-terminals) |
| DIN 46224-1982 |
碳刷用銅電纜的沖壓終端 |
(Stamped cable sockets for flexibles of carbon brushes) |
| DIN 46225-1976 |
絕緣導線用帶絕緣套的沖壓爪形電纜終端 |
(Stamped terminals with embrace of the insulation for insulated cables) |
| DIN 46227-1960 |
銅導線用電纜終端夾子 |
(Cable clamp sockets for copper conductors) |
| DIN 46228-1-1992 |
芯線終端套.無塑料套的管形套 |
(Tubular end-sleeves without plastic sleeve) |
| DIN 46228-2-1992 |
芯線終端套管.帶及不帶絕緣包皮的壓接結構 |
(Crimp-type end-splices, with and without insulation grip) |
| DIN 46228-3-1992 |
芯線終端套管.導線包皮.無絕緣包皮 |
(Conductor-embracing end-splices, without insulation grip) |
| DIN 46228-4-1990 |
芯線終端套.帶塑料套的管頭 |
(Tubular end-sleeves with plastic sleeve) |
| DIN 46229-1980 |
電纜終端.連接端的命名 |
(Terminal ends; terms) |
| DIN 46230-1980 |
無絕緣套非焊接銅銷釘型電纜端子 |
(Terminal ends for solderless connections; pin type, without insulating sleeve, for copper conductors) |
| DIN 46231-1970 |
銅導線用絕緣的無焊點連接銷釘形電纜終端 |
(Pin type cable-sockets for solderless connections, insulated, for copper conductors) |
| DIN 46234-1980 |
銅導線用無絕緣套的無焊點連接環形電纜終端 |
(Terminal ends for solderless connections; ring type, without insulating sleeve, for copper conductors) |
| DIN 46235-1983 |
銅導線用壓接件魚尾板形電纜終端 |
(Cable lugs; for compression connections, cover plate type, for copper conductors) |
| DIN 46236-1964 |
供釬焊用的沖壓帶絕緣套的爪形電纜終端 |
(Stamped cable sockets with embrace of the insulation) |
| DIN 46237-1970 |
銅導線用絕緣的無焊點連接的擠壓電纜終端 |
(Crimp-type cable sockets for solderless connections, insulated, for copper conductors) |
| DIN 46238-1985 |
塑料絕緣通信軟線的彈簧電纜終端 |
(Springterminals for plastic insulated telecommunication cords) |
| DIN 46244-1980 |
儀器扁插頭用插孔 |
(Tabs for receptacles) |
| DIN 46244-2-1987 |
儀器用扁插頭.槽型結構 |
(Slit tab attached to equipment) |
| DIN 46245-1-1977 |
插頭寬度為２·８的帶絕緣套的插套 |
(Receptacles for tab size 2,8, with insulating sleeve) |
| DIN 46245-2-1976 |
插頭寬度為４·８的帶絕緣套的插套 |
(Receptacles for tabs size 4,8, with insulating sleeve) |
| DIN 46245-3-1975 |
插頭寬度為６·３的帶絕緣套的插套 |
(Receptacles for tabs size 6,3, with insulating sleeve) |
| DIN 46247-1-1975 |
插頭寬度為２·８的無絕緣套的插套 |
(Receptacles for tabs size 2,8, without insulating sleeve) |
| DIN 46247-2-1973 |
插頭寬度為４·８的無絕緣套的插套 |
(Receptacles for tabs size 4,8, without insulating sleeve) |
| DIN 46247-3-1973 |
插頭寬度為６·３的無絕緣套的插套 |
(Receptacles for tabs size 6,3, without insulating sleeve) |
| DIN 46247-4-1973 |
插頭寬度為９·５的無絕緣套的插套 |
(Receptacles for tabs size 9,5, without insulating sleeve) |
| DIN 46248-3-1976 |
無絕緣套的扁形插頭.插頭寬度為６·３ |
(Tab, without insulating sleeve, width of tab 6,3) |
| DIN 46249-1-1980 |
非絕緣平面插塞連接.要求和檢驗 |
(Snap-on connectors, non insulated; requirements, tests) |
| DIN 46252-1975 |
帶塑料絕緣套的通信軟線用電纜終端 |
(Terminals for plastic insulated telecommunication cords) |
| DIN 46254-1-1982 |
通信絞線的非釬焊連接.壓接.要求.檢驗 |
(Solderless connections for telecommunication cords crimp connections; requirements, test methods) |
| DIN 46257-1975 |
電纜終端.帶織物和橡膠絕緣的通信軟線用連接管 |
(Sockets, connecting sleeve for telecommunication cords) |
| DIN 4626-1986 |
疊層板簧.中心螺栓 |
(Center bolts for laminated leaf springs) |
| DIN 46260-1-1988 |
低壓用螺栓接線柱.組裝 |
(Low-voltage stud-terminals; compilation) |
| DIN 46260-2-1988 |
低壓用螺栓接線柱.零件表 |
(Low-voltage stud-terminals; part list) |
| DIN 46262-1-1988 |
低壓用螺栓接線柱.絕緣子 |
(Low-voltage stud-terminals; insulators) |
| DIN 46262-2-1988 |
低壓用螺栓接線柱.套管螺栓 |
(Low-voltage stud-terminals; bushing studs) |
| DIN 46262-4-1988 |
低壓用螺栓接線柱.環.卡圈.墊圈.底板 |
(Low-voltage stud-terminals; snap rings, shackles, washers, shims) |
| DIN 46264-1988 |
高壓用帶澆注樹脂絕緣件的引線端子 |
(High-voltage feed-through terminals with cast resin insulator) |
| DIN 46265-1-1988 |
高壓用帶陶瓷絕緣體的引線端子.組裝 |
(High-voltage feed-through terminals with ceramic insulator; compilation) |
| DIN 46265-2-1988 |
高壓用帶陶瓷絕緣體的引線端子.零件表 |
(High-voltage feed-through terminals with ceramic insulator; parts list) |
| DIN 46266-1-1988 |
高壓用引線端子.陶瓷絕緣子 |
(High-voltage feed-through terminals; ceramic insulator) |
| DIN 46266-2-1988 |
高壓用引線端子.引線接線柱 |
(High-voltage feed-through terminals; bushing studs) |
| DIN 46266-3-1988 |
高壓用引線端子.凸緣.墊圈 |
(High-voltage feed-through terminals; flanges, washers) |
| DIN 46267-1-1985 |
銅導體用不耐張力的壓制接頭 |
(Non tension-proof compression joints for copper conductors) |
| DIN 46267-2-1985 |
鋁導體用不耐張力的壓制接頭 |
(Non tension-proof compression joints for aluminium conductors) |
| DIN 46268-1-1988 |
圓插接件.3.5mm圓插頭用帶卡簧的圓插座 |
(Circular connectors; snap-in receptacle for 3,5 mm snap-in pin) |
| DIN 46268-2-1988 |
圓插接件.3.5mm圓插座用帶卡簧的圓插座 |
(Circular connectors; snap-in pin for 3,5 mm snap-in receptacles) |
| DIN 46274-1973 |
同軸端子B |
(Sleeve terminals B) |
| DIN 46276-1-1991 |
開關設備.母線和扁接頭用的膨脹接頭.層狀的.韌性的 |
(Expansion joints for busbars and flat terminals; lamellar flexible) |
| DIN 46276-2-1991 |
開關設備.母線和扁接頭用的膨脹接頭.層狀的.高韌性的 |
(Expansion joints for busbars and flat terminals; lamellar high flexible) |
| DIN 46278-1952 |
通用部件.開關設備接線板.用于100mm2以下單根導線的接線板 |
(General components; series terminal in switchboard plants, series terminal for a conductor up to 10 mm) |
| DIN 46278-2-1965 |
有軌車輛用接線板.用于1.5-120mm2平方導線 |
(Mountable terminal blocks for traction equipment for conductors from 1,5 mm up to 120 mm) |
| DIN 46281-1976 |
防爆裝置用扁平接線板.用于2.5mm2以下的導線.直流600V.交流500V.10A |
(Flat terminal connection strips for electrical apparatus in firedamp proof and explosion protected enclosures) |
| DIN 46282-1973 |
導線接頭的接線夾子 |
(Clamping saddle for conductors) |
| DIN 46284-1972 |
交流380V直流440V.2.5mm2平方以下導線的二極和三極盒式端子板(儀器端子) |
(Two- and three-pole socket terminal strips (appliance terminals) 380 V a.c. and 440 V d.c. for conductors up to 2,5 mm) |
| DIN 46285-1972 |
交流380V直流440V.2.5MM2平方以下導線的二極至三極盒式端子板（燈具端子） |
(One to three-pole socket terminal strips (lighting fixture terminals) 380 V a.c. and 440 V d.c. for conductors up to 2,5 mm) |
| DIN 46288-1974 |
導線接頭用連接墊圈 |
(Connecting Washers for Conductors) |
| DIN 46289-1-1984 |
電氣端子.分類.概念.專業詞匯 |
(Terminals for electrical purposes; classification, definitions, technical terms) |
| DIN 46294-1985 |
帶有６個接線柱的矩形端子板.主要尺寸 |
(Terminal board, square shaped with six terminals; main dimensions) |
| DIN 46295-1-1985 |
帶有６個槽接線柱的矩形端子板.主要尺寸 |
(Terminal board, square shaped with six slit-bolts; main dimensions) |
| DIN 46295-2-1981 |
帶有６個槽接線柱的矩形端子板.橋形連接片和壓緊螺母 |
(Terminal board, square shaped with six slit-bolts; accessories) |
| DIN 46295-3-1981 |
帶有６個槽接線柱的矩形端子板.電纜接孔 |
(Terminal board, square shaped with six slit-bolts; cable sockets) |
| DIN 46300-1980 |
安裝材料.把電度表和控制儀固定在電表底盤上的固定螺栓 |
(Mounting material; mounting bolt for electric meters and controlgear on meter panels) |
| DIN 46329-1983 |
鋁導線用環形壓制連接的電纜終端 |
(Cable lugs; for compression connections, ring type, for aluminium conductors) |
| DIN 46330-1-1981 |
插頭寬度為２·４的無絕緣套的短插套 |
(Short receptacles without insulating sleeve, for tab size 2,4) |
| DIN 46330-2-1981 |
插頭寬度為２·８的無絕緣套的短插套 |
(Short receptacles; without insulating sleeve, for tab size 2,8) |
| DIN 46335-1978 |
帶塑料絕緣套或編織物絕緣套的通信軟線用電纜終端 |
(Terminals for plastic- or textil insulated telecommunication cords) |
| DIN 46336-1987 |
彈簧電纜終端用插頭外殼 |
(Plugbox for springterminals) |
| DIN 46339-1984 |
接線板上測試用的帶彈性銷釘?shù)慕硬寮?插頭和插座的主要尺寸 |
(Connectors with resilient pin for testing purposes on terminal blocks; main dimensions for plug and socket) |
| DIN 46340-1-1981 |
插頭寬度為２·８的快速插套 |
(Snap-in receptacles for tab size 2,8) |
| DIN 46340-3-1981 |
插頭寬度為６·３的快速插套 |
(Snap-in receptacles for tab size 6,3) |
| DIN 46340-4-1981 |
插頭寬度為９·５的快速插套 |
(Snap-in receptacles for tab size 9,5) |
| DIN 46340-5-1981 |
插頭寬度為７·８的快速插套 |
(Snap-in receptacles for tab size 7,7) |
| DIN 46341-1-1977 |
銅導線用無絕緣套的非焊接連接的接線器 |
(Solderless connectors, without insulating sleeve, for copper conductors) |
| DIN 46342-1-1973 |
帶直形和角形固定孔的扁插頭用插套 |
(Tabs, straight and angled, for receptacles) |
| DIN 46343-1-1981 |
插套尺寸為２·８的帶簧片的扁插頭 |
(Snap-in tabs for receptacle size 2,8) |
| DIN 46343-2-1981 |
插座尺寸為4.8的帶簧片的扁插頭 |
(Snap-in tabs for receptacle size 4,8) |
| DIN 46343-3-1981 |
插座尺寸為6.3的帶簧片的扁插頭 |
(Snap-in tabs for receptacle size 6,3) |
| DIN 46343-4-1981 |
插座尺寸為9.5的帶簧片的扁插頭 |
(Snap-in tabs for receptacle size 9,5) |
| DIN 46345-1980 |
插頭寬度為６·３的帶扁插頭的插套 |
(Receptacles with tab for size 6,3) |
| DIN 46346-1980 |
插頭寬度為６·３側面接線的插套 |
(Flag receptables for tab size 6,3) |
| DIN 46380-2002 |
電纜和電線的生產及運輸.定義 |
(Manufacturing and transport of cables and wires - Definitions) |
| DIN 46391-1-1979 |
電纜.電線的交貨用的繞線盤.尺寸 |
(Delivery drums) |
| DIN 46391-2-1981 |
電纜.電線的交貨用的繞線盤.木質繞線盤的交貨技術條件 |
(Delivery drums; technical terms of delivery for wooden drums) |
| DIN 46391-3-1984 |
電纜.電線的交貨用的繞線盤.具有大于2800mm的法蘭直徑的線盤.尺寸 |
(Delivery drums; diameter above 2800 mm) |
| DIN 46391-4-1985 |
電纜.導線的交貨用的繞線盤.剛繞線盤的交貨技術條件 |
(Delivery drums; technical terms of delivery for steel drums) |
| DIN 46392-1-1981 |
絕緣導線交貨用線盤.尺寸 |
(Spools; for the delivery of flexible cords, dimensions) |
| DIN 46395-1972 |
機用線圈 |
(Machine spools) |
| DIN 46396-2-1986 |
電纜.電線生產用容器外殼內徑為500mm以上 |
(Containers for use in the manufacture of cables and wires, inner diameter above 500 mm) |
| DIN 46397-11-2005 |
用于線材制造的繞線盤.第11部分:帶矩形法蘭的繞線盤.尺寸 |
|
| DIN 46397-11-2005 |
用于線材制造的繞線盤.第11部分:帶矩形法蘭的繞線盤.尺寸 |
|
| DIN 46397-12-2005 |
用于線材制造的繞線盤.第12部分:帶矩形法蘭的繞線盤.技術規范 |
|
| DIN 46397-12-2005 |
用于線材制造的繞線盤.第12部分:帶矩形法蘭的繞線盤.技術規范 |
|
| DIN 46397-1983 |
用于線材制造的繞線盤 |
(Spools for fabrication of wires) |
| DIN 46397-21-2005 |
用于線材制造的繞線盤.第21部分:帶錐形法蘭的繞線盤.尺寸 |
|
| DIN 46397-21-2005 |
用于線材制造的繞線盤.第21部分:帶錐形法蘭的繞線盤.尺寸 |
|
| DIN 46397-22-2005 |
用于線材制造的繞線盤.第22部分:帶錐形法蘭的繞線盤.技術規范 |
|
| DIN 46397-22-2005 |
用于線材制造的繞線盤.第22部分:帶錐形法蘭的繞線盤.技術規范 |
|
| DIN 464-1986 |
滾花螺釘.高型 |
(Knurled thumb screws) |
| DIN 46406-1-1972 |
電機用輪箍絲.可磁化的拉制鍍錫鋼絲 |
(Binding Wires for Electrical Machines; Magnetic Steel Wire, Drawn and Tinned) |
| DIN 46406-2-1972 |
電機用輪箍絲.不可磁化的拉制鍍錫鋼絲 |
(Binding Wires for Electrical Machines; Non-magnetic Steel Wire, Drawn and Tinned) |
| DIN 46420-1970 |
電工用拉制圓鋁線.尺寸 |
(Round Aluminium Wires for Electrical Purposes, Drawn; Dimensions) |
| DIN 46424-1973 |
開關設備.匯流排用壓制U型鋁型材 |
(Switchgear; Extruded Channel Sections of Aluminium for Busbars) |
| DIN 46425-1970 |
電工用精拉制圓鋁線.尺寸 |
(Round Aluminium Wires for Electrical Purposes, Exactly Drawn; Dimensions) |
| DIN 46431-1970 |
電工用精拉制圓銅線.尺寸 |
(Round Copper Wires for Electrical Purposes; Precision Drawn, Dimensions) |
| DIN 46438-1972 |
高柔性圓銅索 |
(Round ropes of copper; high flexible) |
| DIN 46440-1972 |
編織的圓銅索 |
(Braided round ropes of copper) |
| DIN 46443-1972 |
平織扁銅索 |
(Webbed flat stranded ropes of copper) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com