標準號 |
中文名稱 |
英文名稱 |
| DIN 18820-2-1991 |
用于承載構件的玻璃纖維增強非飽和聚酯樹脂和苯甲酰甲基樹脂制層壓塑料.(GF-UP.GF-PHA).標準層壓塑料的物理 |
(Laminates of textile glass-reinforced unsaturared polyester and phenolic resins for load-bearing structural members (GF-UP, GF-PHA); physical parameters for standard laminates) |
| DIN 18820-3-1991 |
用于承載構件的玻璃纖維增強非飽和聚酯樹脂和苯甲酰甲基樹脂制層壓塑料.(GF-UP.GF-PHA).承載層壓塑料的防護措施 |
Laminates of textile glass-reinforced unsaturated polyester and phenacrylic resins for load-bearing structural members (GF-UP, GF-PHA); protective measures for load-bearing laminates |
| DIN 18820-4-1991 |
用于承載構件的玻璃纖維增強非飽和聚脂樹酯和苯甲酰甲基樹脂制層壓塑料.(GF-UP.GF-PHA).檢驗和質量監督 |
(Laminates of textile glass-reinforced unsaturated polyester and phenacrylic resins for load-bearing structural members (GF-UP, GF-PHA); tests and quality control) |
| DIN 18851-2003 |
商用廚房設備.微波加熱式灶具.要求和試驗 |
(Equipment for commercial kitchens - Ranges - Requirements and testing) |
| DIN 18852-1981 |
大型廚房設備.煎.烤架篩板.要求和檢驗 |
Fryer and griddle plates |
| DIN 18852-2003 |
商用廚房設備.煎和烤用具.要求和試驗 |
(Equipment for commercial kitchens - Frying and grilling appliances - Requirements and testing) |
| DIN 18853-1981 |
大型廚房設備.蒸鍋.要求和檢驗 |
Bain maries |
| DIN 18854-1981 |
大型廚房設備.多層煎烤爐.糕點甜食店烘爐.要求和檢驗 |
Multiple deck ovens |
| DIN 18854-2003 |
商用廚房設備.多層烤箱.要求和試驗 |
(Equipment for commercial kitchens - Multiple deck ovens - Requirements and testing) |
| DIN 18855-1-2003 |
大型廚房設備.第1部分:雙層蒸煮鍋和快速蒸煮鍋要求和測試 |
(Equipment for commercial kitchens - Part 1: Double jacketed boiling and quick boiling pans; Requirements and testing) |
| DIN 18855-1-2005 |
商用廚房設備.第1部分:雙層蒸煮鍋和快速蒸煮鍋.要求和試驗 |
|
| DIN 18855-1-2005 |
商用廚房設備.第1部分:雙層蒸煮鍋和快速蒸煮鍋.要求和試驗 |
|
| DIN 18855-1981 |
大型廚房設備.雙壁蒸煮鍋和有無壓蒸煮空間的快速蒸煮鍋.要求和檢驗 |
Double jacketea boiling and quick boiling pans |
| DIN 18856-1981 |
大型廚房設備.煎鍋.要求和檢驗 |
Deep fat fryers with cold zone |
| DIN 18856-2003 |
商用廚房設備.有冷卻區的油煎鍋.要求和試驗 |
(Equipment for commercial kitchens - Deep fat fryers with cold zone - Requirements and testing) |
| DIN 18857-1-2003 |
大型廚房設備.第1部分:可傾式煎鍋.要求和試驗 |
(Equipment for commercial kitchens - Part 1: Tilting fry pans; Requirements and testing) |
| DIN 18857-1981 |
大型廚房設備.翻傾煎鍋.要求和檢驗 |
Tilting fry pans |
| DIN 18858-1981 |
大型廚房設備.紅外線烤箱(耐火保險箱).要求和檢驗 |
Salamander broilers |
| DIN 18858-2003 |
商用廚房設備.帶烤板的燒烤器具和旋轉烤架.要求和試驗 |
(Equipment for commercial kitchens - Salamander broilers and giros grills - Requirements and testing) |
| DIN 18860-1-2000 |
商業廚房設備,工作臺.第1部分:開放工作臺.要求和試驗 |
Equipment for commercial kitchens - Working tables - Part 1: Open working tables; requirements and testing |
| DIN 18860-2-2000 |
商業廚房設備,工作臺.第2部分:下部帶柜子的工作臺.要求和試驗 |
Equipment for commercial kitchens - Working tables - Part 2: Working tables with substructures; requirements and testing |
| DIN 18861-1-2000 |
商業廚房設備.洗碗設備和洗池.第1部分:洗碗設備.要求和試驗 |
(Equipment for commercial kitchens - Dishwashing facilities and sinks - Part 1: Dishwashing facilities; requirements and testing) |
| DIN 18861-2-2000 |
商業廚房設備.洗碗設備和洗池.第2部分:洗池.要求和試驗 |
Equipment for commercial kitchens - Dishwashing facilities and sinks - Part 2: Sinks; requirements and testing |
| DIN 18862-1-1981 |
大型廚房設備.自動煎烤機.要求和檢驗.短時間煎烤物 |
Automatic units for grilling products |
| DIN 18862-1-2003 |
大型廚房設備.自動燒烤機.要求和檢驗.第1部分:短時間燒烤用肉 |
(Equipment for commercial kitchens - Automatic units for grilling products; Requirements and testing - Part 1: Meal for short-time roasting) |
| DIN 18862-2-1981 |
大型廚房設備.自動煎烤機.要求和檢驗.長時間煎烤物 |
Automatic units for grilling products |
| DIN 18862-2-2003 |
大型廚房設備.自動燒烤機.要求和檢驗.第2部分:長時間燒烤用肉 |
(Equipment for commercial kitchens - Automatic units for grilling products; Requirements and testing - Part 2: Meat for long-time roasting) |
| DIN 18863-1987 |
大型廚房設備.用于煮熟和在蒸氣壓力下提煉的自動機和設備.要求和檢驗.(對于該標準.其介紹時間適用至1987年9 月30日) |
Equipment for commercial kitchens; pressure steam cooker; requirements and testing |
| DIN 18863-2003 |
商用廚房設備.壓力蒸氣炊具.要求和試驗 |
(Equipment for commercial kitchens - Pressure steam cookers - Requirements and testing) |
| DIN 18864-1999 |
商用櫥房設備.送餐用保溫容器 |
Equipment for commercial kitchens - Heat-insulated container for food transport |
| DIN 18865-1-2003 |
大型廚房設備.食品配送設備.第1部分:尺寸、要求和試驗 |
Equipment for commercial kitchens - Food distribution equipment - Part 1: Dimensions, requirements, testing |
| DIN 18865-10-2004 |
大型廚房設備.食品銷售設備.第10部分:現金形式.要求和試驗 |
|
| DIN 18865-2-1992 |
大型廚房設備.食品銷售設備.餐具加熱箱和熱售貨柜臺 |
(Equipment for commercial kitchens; food distribution equipment; heated cabinets, heated service counters) |
| DIN 18865-2-2004 |
大型廚房設備.食品配送設備.第2部分:加熱服務臺 |
|
| DIN 18865-3-2003 |
大型廚房設備.食品配送設備.第3部分:配送桌(出售非肉非奶食品柜臺) |
Equipment for commercial kitchens - Food distribution equipment - Part 3: Service tables (neutral counters) |
| DIN 18865-4-2001 |
商用廚房設備.食品分配設備.第4部分:加熱或不加熱頂架 |
(Equipment for commercial kitchens - Food distribution equipment - Part 4: Top shelves heated or not heated) |
| DIN 18865-5-2003 |
大型廚房設備.食品配送設備.第5部分:托盤滑道 |
(Equipment for commercial kitchens - Food distribution equipment - Part 5: Tray slides) |
| DIN 18865-6-2003 |
大型廚房設備.食品配送設備.第6部分:自動售貨機 |
(Equipment for commercial kitchens - Food distribution equipment - Part 6: Dispensers) |
| DIN 18865-7-2003 |
大型廚房設備.食品配送設備.第7部分:冷藏器 |
(Equipment for commercial kitchens - Food distribution equipment - Part 7: Cold storage) |
| DIN 18865-8-2003 |
大型廚房設備.食品配送設備.第8部分:冷卻頂架 |
(Equipment for commercial kitchens - Food distribution equipment - Part 8: Top shelves refrigerated) |
| DIN 18865-9-1997 |
大型廚房設備.食品銷售設備.第9部分:標準型和衛生型櫥房設備內部 |
(Equipment for commercial kitchens - Food distribution equipment - Part 9: Equipment-insides in basic and hygiene version) |
| DIN 18866-1-1990 |
大型廚房設備.對流式加熱爐.要求和檢驗 |
(Equipment for commercial kitchens; convection-ovens; requirements and testing) |
| DIN 18866-2-1995 |
大型廚房設備.對流式加熱爐.第2部分:熱蒸氣炊具.要求和檢驗 |
(Equipment for commercial kitchens - Convection ovens - Part 2: Convection steamers; requirements and testing) |
| DIN 18866-2003 |
商用廚房設備.對流式烤箱和蒸煮設備.要求和試驗 |
(Equipment for commercial kitchens - Convection ovens and convection steamers - Requirements and testing) |
| DIN 18867-1-1997 |
大型烹飪設備.車上的烹飪設備.第1部分:快餐車 |
(Equipment for commercial kitchens - Mobile equipment - Part 1: Runabout carts) |
| DIN 18867-2-1997 |
大型烹飪設備.車上的烹飪設備.第2部分:貨架車 |
(Equipment for commercial kitchens - Mobile equipment - Part 2: Utility racks) |
| DIN 18867-3-1997 |
大型烹飪設備.車上的烹飪設備.第3部分:不加熱的托盤運送車 |
(Equipment for commercial kitchens - Mobile equipment - Part 3: Tray service trolley, non heated) |
| DIN 18867-4-1997 |
大型烹飪設備.車上的烹飪設備.第4部分:托盤清洗收拾車 |
(Equipment for commercial kitchens - Mobile equipment - Part 4: Tray removal trolley) |
| DIN 18867-5-1997 |
大型烹飪設備.車上的烹飪設備.第5部分:加熱宴會車 |
(Equipment for commercial kitchens - Mobile equipment - Part 5: Heated serving trolleys for banquets) |
| DIN 18867-6-1997 |
大型烹飪設備.車上的烹飪設備.第6部分:冷凍,冰凍產品用宴會車 |
(Equipment for commercial kitchens - Mobile equipment - Part 6: Banky for cooled and frosted products) |
| DIN 18867-7-1997 |
大型烹飪設備.車上的烹飪設備.第7部分:食品運送車 |
(Equipment for commercial kitchens - Mobile equipment - Part 7: Food conveyers) |
| DIN 18867-8-1997 |
大型烹飪設備.車上的烹飪設備.第8部分:腳輪 |
(Equipment for commercial kitchens - Mobile equipment - Part 8: Castors (wheels)) |
| DIN 18867-9-2004 |
大型廚房設備.食品銷售設備.第9部分:自動售貨機 |
|
| DIN 18870-2000 |
商用廚房設備.給養設備廢氣熱損失的限值 |
(Equipment for commercial kitchens - Limits for wastegas heat losses of catering equipments) |
| DIN 18871-1-2004 |
商用廚房設備.熱設備.第1部分:加熱柜.要求和試驗 |
|
| DIN 18871-2-2004 |
商用廚房設備.熱設備.第2部分:保溫用隔水燉鍋.要求和試驗 |
|
| DIN 18871-3-2004 |
商用廚房設備.熱設備.第3部分:隔水燉鍋.要求和試驗 |
|
| DIN 18871-4-2005 |
商用廚房設備.熱設備.第4部分:面條機的要求和試驗 |
|
| DIN 18889-1956 |
貯熱器和燒煤的無壓力熱水取暖裝置.檢驗壓力1個表壓.概念、構造、質量、效率、檢驗 |
(Coal-fired Water-heater with Storage Boiler, without Pressure for Test Pressure of 1 Atmosphere; Terms employed, Construction, Quality, Capacity and Testing) |
| DIN 1889-1-1989 |
帶圓柱柄的圓柱形模具銑刀 |
(Cylindrical die-sinking cutters with parallel shank) |
| DIN 1889-2-1983 |
帶莫式錐柄的模具銑刀 |
(Cylindrical die-sinking cutters with morse taper shank) |
| DIN 1889-3-1989 |
帶圓柱柄的錐形模具銑刀 |
(Tapered die-sinking cutters with parallel shank) |
| DIN 1889-5-1990 |
模具銑刀.交貨技術條件 |
(Die-sinking cutters; technical delivery conditions) |
| DIN 18890-10-1974 |
使用固體燃料的爐子.無煙的燃燒 |
(Stoves for solid fuel - Clean air) |
| DIN 18892-2000 |
使用固體燃料的瓷磚壁爐和砌瓦爐的加熱內襯 |
(Inserts for solid fuel to be built in Kachel攆en/Putz攆en) |
| DIN 18893-1987 |
單個燃燒爐的室內發熱能力.爐膛尺寸測定的近似方法 |
(Space heating capacity of single fireplaces; approximate method for determining the size of single fireplaces) |
| DIN 18894-2005 |
固體燃料燃燒爐.以木制丸狀材料為燃料的獨立加熱器.要求、檢驗和標記 |
|
| DIN 18896-2005 |
使用固體燃料的火爐.安裝和使用的技術規范 |
|
| DIN 18897-1-2005 |
使用固體燃料的火爐.經由室內空氣獨立供暖的裝置.第1部分:房間加熱器 |
|
| DIN 189-1977 |
傳動件.底板.主要尺寸 |
(Driving Elements; Sole Plates; Main Dimensions) |
| DIN 1890-1-1981 |
直齒槽鏟背銑刀.尺寸 |
(slotting cutters, with straight teeth; dimensions) |
| DIN 1890-2-1990 |
直齒鏟背槽銑刀.交貨技術條件 |
(Straight relieved tooth slotting cutters; technical delivery conditions) |
| DIN 18900-1982 |
木電線桿結構.計算和型式 |
(Wooden pole constructions; design and execution) |
| DIN 18902-1986 |
廄舍建筑的石制件.墻壁護板、平板、飼料槽、尺寸、要求和檢驗 |
(Vitrified clay elements for stable construction; mangers, tiles, troughs; sizes, requirements, testing) |
| DIN 18908-1992 |
廄舍地板.鋼筋混凝土和土制有縫地板.尺寸、計算負荷、測量安裝 |
(Floors for livestock buildings; slatted floors made of precast reinforced concrete components or of wood; dimensions, design loads, design, installation) |
| DIN 1891-1-1981 |
聯鎖可調槽銑刀.尺寸 |
(Slotting cutters, interlocking and adjustable; dimensions) |
| DIN 1891-2-1990 |
聯鎖可調槽銑刀.交貨技術條件 |
(Interlocking slotting cutters; technical delivery conditions) |
| DIN 18910-1-2004 |
封閉廄的熱絕緣.熱絕緣和強制通風.第1部分:封閉通風廄的計劃和設計的準則 |
|
| DIN 18910-1992 |
封閉廄的空調設施.冬季室內保持的水汽和溫度及通風和照明 |
(Thermal insulation for closed livestock buildings; thermal insulation and ventilation; principles for planning and design) |
| DIN 18914 Bb.1-1985 |
鋼制薄壁圓形貯倉.說明 |
(Thin-walled cylindrical steel tower silos; explanatory notes) |
| DIN 18914-1985 |
鋼制薄壁圓形貯倉 |
(Thin-walled cylindrical steel tower silos) |
| DIN 18915-1990 |
圓林建設中的植被技術.土方工程 |
(Vegetation technology in landscaping; soil working) |
| DIN 18916-1990 |
景區綠化和植物護理 |
(Vegetation technology in landscaping; plants and plant care) |
| DIN 18917-1990 |
景區綠化.草坪.草皮的種植 |
(Vegetation technology in landscaping; turf and seeding) |
| DIN 18918-1990 |
園林綠化中的植被技術.穩定土壤的生物方法.播種和種植穩定法.植物穩定法.非生物和建筑件結合的結構方法 |
(Vegetation technology in landscaping; biological methods of site stabilization; stabilization by seeding and planting; stabilization by means of living plant material; dead material and building elements, combined construction methods) |
| DIN 18919-1990 |
景區綠化.植物的維護工作 |
(Vegetation technology in landscaping; care of vegetation during development and maintenance in green areas) |
| DIN 1892-1-1981 |
聯鎖圓柱銑刀.尺寸 |
(Interlocking cylindrical cutters; dimensions) |
| DIN 1892-2-1990 |
兩件式聯鎖圓柱銑刀.交貨技術條件 |
(Interlocking cylindrical cutters; technical delivery conditions) |
| DIN 18920-1990 |
景區綠化.樹木保護.建筑工地的綠化 |
(Vegetation technology in landscaping; protection of trees, plantations and vegetation areas during construction work) |
| DIN 1893-1-1978 |
ISO米制梯形螺紋的螺紋圓盤銑刀.尺寸 |
(Disc type thread milling cutters for ISO metric trapezoidal threads; dimensions) |
| DIN 1893-2-1990 |
ISO米制梯形螺紋的螺紋圓盤銑刀.交貨技術條件 |
(Side and face thread milling cutters for ISO metric trapezoidal threads; technical delivery conditions) |
| DIN 1895-1975 |
莫氏錐孔用機鉸刀 |
(Machine Reamers for Morse Tapers) |
| DIN 1896-1975 |
公制錐孔用機鉸刀 |
(Machine Reamers for Metric Tapers) |
| DIN 18960-1999 |
高層建筑使用成本 |
(User costs of buildings) |
| DIN 1897-1984 |
圓柱柄超短麻花鉆 |
(Parallel shank twist drill, stub series) |
| DIN 1898-1-1990 |
帶圓柱柄的錐形銷孔鉆頭 |
(Taper pin hole drills with parallel shank) |
| DIN 1898-2-1990 |
帶莫氏錐柄的錐形銷孔鉆頭 |
(Taper pin hole drills with Morse taper shank) |
| DIN 1899-1990 |
微型鉆頭 |
(Small drills) |
| DIN 18990 Berichtigung 1-2003 |
對DIN18990:2002-09的勘誤 |
(Corrigenda to DIN 18990:2002-09) |
| DIN 18990-2002 |
混凝土的飛灰.合格證 |
(Fly ash for concrete - Attestation of conformity) |
| DIN 19001-1979 |
照相機閃光燈插座.連接尺寸 |
(Camera accessory shoes; connecting dimensions) |
| DIN 19002-1-1989 |
照相鏡頭.插裝式和旋進式配件的連接尺寸 |
(Camera lenses; connecting dimensions for accessories pushed on or screwed-in) |
| DIN 19003-1-1992 |
閃光燈插接連接.閃光燈電纜.插頭.內接頭、連接尺寸、要求 |
(Flash connector; connecting cable, plug, socket, connecting dimensions, requirements) |
| DIN 19004-1980 |
照相技術.快門線.快門線套.連接尺寸 |
(Screw threads of shutter cable release; tip and socket, connecting dimensions) |
| DIN 19010-1-1979 |
光電曝光計.刻度盤.校準器 |
(Photo-electric exposure meters; scales, calibration) |
| DIN 19010-2-1983 |
光電曝光計.照相機的自動曝光調節 |
(Photoelectric exposure meters; automatic controls of exposure in cameras) |
| DIN 19010-3-2000 |
光電曝光計.第3部分:閃光燈曝光計 |
(Photo-electric exposure meters - Part 3: Exposure meters for flash light) |
| DIN 19011-1-2000 |
閃光燈電源.閃光指數和輸出數據的測定 |
(Photoflash sources - Determination of guide numbers and output data) |
| DIN 19011-2-1984 |
閃光燈電源.帶自動爆光調節的電子閃光燈 |
(Photoflash sources; electronic flash equipment, automatic control of exposure) |
| DIN 19011-3-1989 |
照相閃光燈光源.輻射光譜分布的標記數 |
(Flashlight sources; identification numbers for spectral distribution of radiation) |
| DIN 19012-1990 |
閃光燈.帶固定反射器的閃光燈的配置.照明技術數據 |
(Multiple lamps; flash lamp arrays; photometric data) |
| DIN 19015-1983 |
鏡間快門計時.術語.曝光時間.測量裝置.同步觸點 |
(Timing in between-the-lens-shutters; technical terms, exposure times, synchro contacts, measuring devices) |
| DIN 19016-1983 |
焦點平面快門計時.術語.曝光時間.測量裝置.同步觸點 |
(Focal-plane shutters; technical terms, exposure times, synchro contacts, measuring devices) |
| DIN 19017-1991 |
曝光值.概念及參考點.曝光值校正 |
(Exposure value and correction factor; definition, reference base) |
| DIN 19021-2-1985 |
帶投光燈的幻燈放映機的鑒定.幻燈放映機的溫度測量 |
(Evaluation of still projectors with incandescent lamps; measurement of temperature in the picture area of slides) |
| DIN 19021-3-1987 |
帶投光燈的幻燈放映機的鑒定.工作投影機的溫度測量 |
(Evaluation of still projectors with incandescent lamps; measurement of temperature in the projection area of overhead projectors) |
| DIN 19030-3-1985 |
攝影.復制和翻拍用的濾光片.照相用的濾光片.濾光片標志 |
(Filters for camera lenses, printing processes and projection; filters for camera lenses, designations) |
| DIN 19030-4-1990 |
攝影.復制和翻拍用濾光器.復制用濾光器.濾光器值的測定 |
(Filters for camera lenses, for copying and projection purposes; filters for copiers; determination of filter values) |
| DIN 19030-5-1990 |
攝影.復制和翻拍用濾光器.復制用濾光器.彩色復制機的濾光器刻度表 |
(Filters for camera lenses, for copying and projection purposes; filters for copiers; determination of filter values and filter scales of colour copiers) |
| DIN 19045-1-1997 |
放映用幻燈片和電影片.所有放映類型用觀看條件和放映條件 |
(Projection of still pictures and motion-pictures - Part 1: Conditions for projection and viewing for all kinds of projection) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com