標準號 |
中文名稱 |
英文名稱 |
| DIN 19302-1995 |
包裝材料.一般包裝用紙.要求.檢驗 |
(Packaging materials - Paper for universaly packaging - Requirements, test method) |
| DIN 19303-1999 |
紙板.概念,定義和分類 |
(Paperboard - Terms, definitions and grades) |
| DIN 19303-2005 |
紙板.術語和分級 |
|
| DIN 19306-1-2002 |
紙.印刷紙.第1部分:交貨技術總規范 |
(Paper - Printing paper - Part 1: General technical delivery specifications) |
| DIN 19306-2-2002 |
紙.印刷紙.第2部分:白色(銅版紙和無涂料紙)膠版印刷紙的交貨技術條件 |
(Paper - Printing paper - Part 2: Technical delivery specifications for offset-paper, coated and uncoated, white) |
| DIN 19306-3-2002 |
紙.印刷紙.第3部分:上涂料和未上涂料的只印單面的雙面凹板印紙的技術交貨總規范 |
(Paper - Printing paper - Part 3: General technical delivery specifications for rotogravure paper, coated and uncoated, white) |
| DIN 19306-4-2005 |
紙.打印紙.第4部分:新聞紙的交貨技術規范 |
|
| DIN 19307-1997 |
紙板和紙.無上色無涂層辦公室用紙.要求,檢驗 |
(Paper and board - Office paper, uncoated - Requirements, test methods) |
| DIN 1940-1976 |
內燃機.活塞式發動機、概念、公式符號、單位 |
(Reciprocating internal combustion engines; terms, formulae, units) |
| DIN 1942 Berichtigung 1-1996 |
校正DIN1942:1994-02 |
(Corrigenda to DIN 1942: 1994-02) |
| DIN 1942-1994 |
蒸汽鍋爐的驗收試驗規程（VDI蒸汽鍋爐規則） |
(Acceptance test code for steam generators (VDI-rules for steam generators)) |
| DIN 1943-1975 |
汽輪機熱工驗收試驗(VDI汽輪機規則) |
(Thermal acceptance tests of steam turbines) |
| DIN 1945-1-1980 |
容積式壓縮機.熱工驗收及性能試驗 |
(Displacement compressor; thermodynamic acceptance and performance test) |
| DIN 1946-1-1988 |
房間通風技術.專業術語和圖形符號(VDI通風規則) |
(Heating, ventilation and air conditioning; terminology and graphical symbols (VDI code of practice)) |
| DIN 1946-2-1994 |
房間通風技術.衛生要求(VDI通風規則) |
(Ventilation and air conditioning; technical health requirements (VDI ventilation rules)) |
| DIN 1946-3-1962 |
通風技術設備.車輛通風(VDI通風規則) |
(Ventilation systems (VDI-ventilation rules); ventilation of vehicles) |
| DIN 1946-4-1999 |
房間通風技術.第4部分:醫院病房通風技術設備(VDI通風規則) |
(Ventilation and air conditioning - Part 4: Ventilation in hospitals (VDI Ventilation rules)) |
| DIN 1946-6-1998 |
房間通風技術.第6部分:房屋通風.要求.安裝.驗收(VDI通風規則) |
(Ventilation and air conditioning - Part 6: Ventilation for residential buildings; requirements, performance, acceptance (VDI ventilation code of practice)) |
| DIN 1946-7-1992 |
供暖、通風和空調.試驗室中的HVAC設備(VDI實施規范) |
(Heating, ventilation and air conditioning; HVAC systems in laboratories (VDI code of practice)) |
| DIN 1947-1989 |
濕冷卻塔的熱技術驗收測試(VDI冷卻塔規則) |
(Thermal performance acceptance testing of water cooling towers; DIN(VDI Code of practice)1947) |
| DIN 19516-2004 |
馬桶座圈.要求和試驗方法 |
|
| DIN 19522-2000 |
沒有套管的鑄鐵排水管和配件 |
(Cast iron drainage pipes and fittings without sockets (SML)) |
| DIN 19531-10-1999 |
建筑物內部廢水和污物排放系統用未增塑聚氯乙烯(PVC-U)套管和配件.第10部分:燃燒性能、質量控制和安裝的推 |
(Pipes and fittings made of unplasticized polyvinyl chloride (PVC-U) socket for waste and soil discharge systems inside buildings - Part 10: Fire behaviour, quality control and installation recommendations) |
| DIN 19533-1976 |
供應飲用水用硬.軟聚乙烯管線.管.管連接.管道零件 |
(Pipe-lines of high-density PE (high-density polyethylene) and low-density PE (low density polyethylene) for drinking water supply; pipes, pipe connections and fittings for pipe-lines) |
| DIN 19534-3-2000 |
無壓地下雨水和污水排放用帶環形密封套筒的未增塑聚氯乙烯(PVC-U)管和配件.第3部分:質量控制和安裝 |
(Pipes and fittings of unplasticized poly(vinyl chloride) (PVC-U) with ring seal socket for non pressure underground drainage and sewerage - Part 3: Quality control and installation) |
| DIN 19535-10-2000 |
建筑物內耐熱水排污系統(HT)用高密度聚乙烯(PE-HD)管和管件.第10部分:防火性能、質量控制和安裝的推薦規范 |
(High-density polyethylene (PE-HD) pipes and fittings for hot-water resistant waste and soil discharge systems (HT) inside buildings - Part 10: Fire behaviour, quality control and installation recommendations) |
| DIN 19537-1-1983 |
污水渠道和管道用高密度聚乙烯管和異型件.尺寸 |
(High density polyethylene (HDPE) pipes and fittings for drains and sewers; dimensions) |
| DIN 19537-2-1988 |
污水渠道和管道用高密度聚乙烯管和異型件.交貸技術條件 |
(High-density polyethylene (HDPE) pipes and fittings for drains and sewers; technical delivery conditions) |
| DIN 19537-3-1990 |
污水渠道和管道用高密度聚乙烯管.異型件和人孔井.預制人孔井.尺寸.交貨技術條件 |
(Prefabricated high density polyethylene (PE-HD) manholes for use in sewerage systems; dimensions and technical delivery conditions) |
| DIN 19538-10-1999 |
建筑物內部耐熱水的廢水和污物排放系統用氯化聚氯乙烯(PVC-C)管和配件.第10部分:燃燒性能、質量控制和安裝 |
(Pipes and fittings made of chlorinated polyvinyl chloride (PVC-C) for hot-water resistant waste and soil discharge systems inside buildings - Part 10: Fire behaviour, quality control and installation recommendations) |
| DIN 19541-1982 |
排水工程電工吸閘門.作用原理 |
(Traps for drainage systems; Functional requirements) |
| DIN 19541-2004 |
專用存水灣.要求和試驗方法 |
|
| DIN 19542-1984 |
便盆沖水箱.結構和檢驗原則 |
(Flushing cisterns; principles for construction and testing) |
| DIN 19551-1-2002 |
廢水處理廠.矩形池.第1部分:帶污泥鏟運機、吸入式污渣清除器和鏈式鏟運機的沉淀池.設備型號和主要尺寸 |
(Wastewater treatment plants - Rectangular tanks - Part 1: Settlement tanks with sludge scraper, suction type sludge remover and chain scraper; Types, main dimensions, equipments) |
| DIN 19551-3-2002 |
廢水處理廠.矩形池.第3部分:帶吸入式污渣清除器和污泥鏟運機的沉砂池.設備型號和主要尺寸 |
(Wastewater treatment plants - Rectangular tanks - Part 3: Grit chambers with suction type sludge remover and sludge scraper; Types, main dimensions, equipment) |
| DIN 19552-2002 |
廢水處理廠.圓形池.帶污泥鏟運機、吸入式污渣清除器和增稠器的沉淀池.設備型號和主要尺寸 |
(Wastewater treatment plants - Circular tanks - Settlement tanks with sludge scraper, suction type sludge remover and thickener; Types, main dimensions, equipment) |
| DIN 19553-2002 |
廢水處理廠.帶有旋轉分配器的滴濾器.主要尺寸和設備 |
(Wastewater treatment plants - Trickling filter with rotary distributor - Main dimensions and equipment) |
| DIN 19554-2002 |
廢水處理廠.帶直桿的電流和逆電流篩網設施.設備主要尺寸 |
(Wastewater treatment plants - Screening plant with straight bar screens as current and counter current screen - Main dimensions, equipment) |
| DIN 19555-2003 |
單線安裝的階梯腳扣.鑲嵌在混凝土中的階梯腳扣 |
(Step irons for single-line installation - Step irons for setting in concrete) |
| DIN 19556-1978 |
凈化設備.閘門式流槽.主要尺寸 |
(Sewage treatment plants; trough with sluice gate, main dimensions) |
| DIN 19556-2004 |
廢水處理設備.閘門式流槽.主要尺寸 |
|
| DIN 19557-1-1984 |
凈化設備.滲濾器用礦物濾料.要求、檢驗、供貨和儲存 |
(Sewage treatment plants; mineral filter media for percolating filters; requirements, testing, delivery, placing) |
| DIN 19557-2-1989 |
凈化設備.滴濾器用塑料填料.要求檢驗 |
(Sewage treatment plants; plastic media for trickling filters; requirements, tests) |
| DIN 19557-2004 |
廢水處理廠.滲濾器用礦物和塑料過濾介質.要求、檢驗、供貨和安置 |
(Wastewater treatment plants - Mineral filter media and plastic media for percolating filters - Requirements, testing, delivery, placing) |
| DIN 19557-2004 |
廢水處理廠.滲濾器用礦物和塑料過濾介質.要求、檢驗、供貨和安置 |
|
| DIN 19558-2002 |
廢水處理廠.池中出口裝置、溢流堰與浮渣檔板和埋入式排水管.建筑原理、主要尺寸和布局 |
(Wastewater treatment plants - Outlet installations, weir and scum baffle, submerged effluent pipes in tanks - Construction principles, main dimensions, layout) |
| DIN 19559-1-1983 |
明渠和自流導管中污水流量的測量.一般說明 |
(Measurement of flow of waste water in open channels and gravity conduits; general information) |
| DIN 19559-2-1983 |
明渠和自流導管中污水流量的測量.文丘氏水槽 |
(Measurement of flow of waste water in open channels and gravity conduits; venturi flumes) |
| DIN 19560-10-1999 |
建筑物中耐熱水排水管道(HT)用聚丙烯(PP)管和管件.第10部分:燃燒特性.質量監督和敷設說明 |
(Pipes and fittings made of polypropylene (PP) for hot water resistant waste and soil discharge systems inside buildings - Part-10: Fire behaviour, quality control and installation recommendations) |
| DIN 19561-10-1999 |
建筑物內部耐熱水的廢水和污物排放系統用苯乙烯共聚物制管和配件.第10部分:燃燒性能、質量控制和安裝的推薦 |
(Pipes and fittings made of styrene-copolymerisats for hot water resistant waste and soil discharge systems inside buildings - Part 10: Fire behaviour, quality control and installation recommendations) |
| DIN 19562-1985 |
圓形和半圓形洗滌設備.尺寸 |
(Wash fountain, circular and semi-circular; dimensions) |
| DIN 19563-1985 |
集體盥洗設備.尺寸 |
(Washing throughs; dimensions) |
| DIN 19565-5-1990 |
地下污水渠道和管道用玻璃纖維增強聚酯樹脂管、異型件和人孔井.預制人孔井.尺寸.交貨技術條件 |
(Prefabricated glass fibre reinforced plastic (UP-GF) manholes for use in sewerage systems; dimensions and technical delivery conditions) |
| DIN 19569-10-2001 |
污水處理廠.結構和技術設備設計原理.第10部分:熱污泥干燥設備的特殊原理 |
(Wastewater treatment plants - Principles for the design of structures and technical equipment - Part 10: Specific principles for the equipment for thermal sludge drying) |
| DIN 19569-11-2004 |
污水處理廠.結構和技術設備設計原理.第11部分:間歇操作裝置 |
|
| DIN 19569-2-2002 |
廢水處理廠.構件和技術裝備的設計原理.第2部分:固體分離及濃縮設備特殊結構原理 |
(Wastewater treatment plants - Principles for the design of structures and technical equipment - Part 2: Specific principles for the equipment for separating and thickening of solids) |
| DIN 19569-3-2002 |
廢水處理廠.構件和技術裝備的設計原理.第3部分:含氧生物廢水處理設備的特殊結構原理 |
(Wastewater treatment plants - Principles for the design of structures and technical equipment - Part 3: Specific principles for the equipment for aerobical biological wastewater treatment) |
| DIN 19569-4-2000 |
廢水處理廠.結構設計原則和技術設備.第4部分:水閘、泄水閘門、疊閘等截水設備的特殊原則 |
(Wastewater treatment plants - Principles for the design of structures and technical equipment - Part 4: Specific principles for shutoff devices as penstocks, sluice gates, stoplogs etc.) |
| DIN 19569-5-2002 |
廢水處理廠.構件和技術裝備的設計原理.第5部分:厭氧淤泥和污水處理廠的特殊結構原理 |
(Wastewater treatment plants - Principles for the design of structures and technical equipment - Part 5: Specific principles for plants for anaerobic wastewater treatment) |
| DIN 19569-7-1999 |
凈化設備.建筑工程和技術裝備的結構原理.第7部分:人類污物接收站 |
(Sewage treatment plants - Principles for the design of structures and technical equipment - Part 7: Station for the transfer of faecal sewage) |
| DIN 19569-8-2005 |
污水處理廠.結構和技術設備設計原則.第8部分:粒狀介質過濾器和粒狀固定臺過濾器中污水處理用設備的具體原則 |
|
| DIN 19569-9-2004 |
廢水處理廠.結構和技術設備的設計原則.第9部分:污水污泥的機械排放 |
|
| DIN 19570-1-1983 |
含鹽廢水和鹽化水域的檢驗.取樣 |
(Analysis of waste brine and salt-laden bodies of water; sampling) |
| DIN 19570-2-1979 |
含鹽廢水的檢驗原則.分析 |
(Waste brine, directives for testing; analysis) |
| DIN 19570-3-1977 |
含鹽廢水的檢驗原則.評定 |
(Waste brine, directives for testing; evaluation) |
| DIN 19570-4-1979 |
含鹽廢水的檢驗原則.就地連續測量 |
(Waste brine, directives for testing; methods of continuous measuring) |
| DIN 19571-1-1997 |
用于C級250道路排水溝框形篦子500×500.組裝 |
(Gully tops 500500 for gullies, class C 250, curve type - Summary) |
| DIN 19571-2-1997 |
用于C級250道路排水溝框形篦子500×500.零件 |
(Gully tops 500500 for gullies, class C 250, curve type - Particulars) |
| DIN 19572-2004 |
人孔入口處的把手.要求和試驗 |
|
| DIN 19583-1-1996 |
500×500的街道排水溝蓋.C級250和D級400.第1部分:組裝 |
(Gully tops 500500 for road gullies - Class C 250 and class D 400 - Part 1: Summary) |
| DIN 19583-2-1996 |
500×500的街道排水溝蓋.C級250和D級400.第2部分:零件 |
(Gully tops 500500 for road gullies - class C 250 and D 400 - Part 2: Particulars) |
| DIN 19584-1-1996 |
人孔蓋.D級400.第1部分:組裝 |
(Manhole tops - Class D 400 - Part 1: Summary) |
| DIN 19584-2-1997 |
人孔蓋.D級400.第2部分:零件 |
(Manhole tops - Class D 400 - Part 2: Particulars) |
| DIN 19585-1976 |
排水配件.鑄鐵材料.混凝土和鑄鐵混凝土制配件的交貨技術條件 |
(Sewage fittings; technical specifications for delivery for fittings from cast iron, concrete and concrete in connection with cast iron) |
| DIN 19590-1-1990 |
A級正方形排水溝蓋.組裝 |
(Gully tops class A 15, quadratic; summary) |
| DIN 19590-2-1990 |
A級正方形排水溝蓋.零件 |
(Gully tops class A 15, quadratic; particulars) |
| DIN 19593-1-1990 |
B級正方形排水溝蓋.組裝 |
(Gully tops class B 125, quadratic; summary) |
| DIN 19593-2-1990 |
B級正方形排水溝蓋.零件 |
(Gully tops class B 125, quadratic; particulars) |
| DIN 19594-1-1990 |
300×500的C級街道排水溝蓋.組裝 |
(Gully tops 300500 for road gullies, class C 250; summary) |
| DIN 19594-2-1990 |
300×500的C級街道排水溝蓋.零件 |
(Gully tops 300500 for road gullies, class C 250; particulars) |
| DIN 19596-1-1990 |
圓形人孔蓋.A級15和B級125.組裝 |
(Manhole tops classes A 15 and B 125, circular; summary) |
| DIN 19596-2-1990 |
圓形人孔蓋.A級15和B級125.框架 |
(Manhole tops classes A 15 and B 125, circular; frames) |
| DIN 19596-3-1990 |
圓形人孔蓋.A級15和B級125.蓋 |
(Manhole tops classes A 15 and B 125, circular; covers) |
| DIN 19597-1-1990 |
方形人孔蓋.A級15.組裝 |
(Manhole tops class A 15, quadratic; summary) |
| DIN 19597-2-1990 |
方形人孔蓋.A級15.框架 |
(Manhole tops class A 15, quadratic; frame) |
| DIN 19597-3-1990 |
方形人孔蓋.A級15.蓋 |
(Manhole tops class A 15, quadratic; covers) |
| DIN 1960-2002 |
建筑工程承包條例.第A部分:建筑工程承包條款的總體說明 |
(Contract procedures for building works - Part A: General directions of contract letting for building works) |
| DIN 19605-1995 |
水處理用固定臥式過濾器.安裝和件 |
(Fixed bed filters for water treatment - Structure and components) |
| DIN 19606-1983 |
水處理用加氯處理設備.設備安裝和運輸 |
(Chlorinators for water treatment; equipment, installation and operation) |
| DIN 19609-1987 |
水處理用硫酸亞鐵.交貨技術條件 |
(Iron(II) sulfate for water treatment; technical delivery conditions) |
| DIN 1961-2002 |
建筑工程承包條例.第B部分:建筑工程施工的總體合同條件 |
(Contract procedures for building works - Part B: General conditions of contract for the execution of building works) |
| DIN 19616-1-1971 |
水處理用氫氧化鈉溶液.非用于離子交換器回收的氫氧化鈉溶液.交貨技術條件 |
(Caustic Soda Solution for Water Treatment, not for Regeneration of Ion Exchangers; Technical Conditions of Delivery) |
| DIN 19616-2-1971 |
離子交換劑再生水處理用苛性鈉溶液.交貨技術條件 |
(Caustic Soda Solution for Water Treatment for Regeneration of Ion Exchangers; Technical Conditions of Delivery) |
| DIN 19620-1972 |
水處理用三磷酸鈉.交貨技術條件 |
(Trisodium Phosphate for Water Treatment; Technical Conditions of Delivery) |
| DIN 19624-1976 |
水處理用沉降過濾器 |
(Precoat Filters for Water Treatment) |
| DIN 19627-1993 |
水處理用臭氧生產設備 |
(Ozone-plants for water treatment) |
| DIN 19632-1987 |
飲水裝置的機械作用過濾器.要求.檢驗.DVGW技術規則 |
(Mechanical filters for drinking water installations; requirements, testing (DVGW code of practice)) |
| DIN 19633-1986 |
水處理用離子交換樹脂.交貨技術條件 |
(Ion exchange resins for water treatment; technical delivery conditions) |
| DIN 19635-1992 |
飲水處理的計量儀器.要求.檢驗.操作.DVGW技術規則 |
(Dosing apparatus for drinking water treatment; requirements, testing, operation; DVGW code of practice) |
| DIN 19636-1989 |
飲用水供應裝置中的硬水軟化設備.要求和檢驗 |
(Water softeners for use in drinking water supply installations; requirements and testing (DVGW code of practice)) |
| DIN 19643-1-1997 |
游泳池和洗澡池水的凈化處理.第1部分:一般要求 |
(Treatment of the water of swimming-pools and baths - Part 1: General requirements) |
| DIN 19643-2-1997 |
游泳池和洗澡池水的凈化處理.第2部分:工藝組合:表面吸附、絮凝、過濾和氯化 |
(Treatment of water of swimming-pools and baths - Part 2: Combination of process: Adsorption, flocculation, filtration, chlorination) |
| DIN 19643-3-1997 |
游泳池和洗澡池水的凈化處理.第3部分:工藝組合:絮凝、過濾、臭氧、吸附過濾和氯化作用 |
(Treatment of water of swimming-pools and baths - Part 3: Combination of process: Flocculation, filtration, ozonization, absorbing filtration, chlorination) |
| DIN 19643-4-1999 |
游泳池和洗澡池水的凈化處理.第4部分:工藝組合:絮凝、臭氧、多層過濾和氯化作用 |
(Treatment of water of swimming pools and baths - Part 4: Combination of process: Flocculation, ozonisation, multilayer filtration, chlorination) |
| DIN 19643-5-2000 |
游泳池和洗澡池水的凈化處理.第5部分:工藝組合:絮凝、過濾、粒狀活性碳吸收和氯化作用 |
(Treatment of water of swimming pools and baths - Part 5: Combination of process: Flocculation, filtration, adsorption atgranular activated carbon; chlorination) |
| DIN 19648-1-1982 |
冷水水表.轉角式水表 |
(Meters for cold water; woltman angle type meters) |
| DIN 19648-2-1982 |
冷水水表.豎管式水表 |
(Meters for cold water; stand post meters) |
| DIN 19648-3-1982 |
冷水水表.上流式水表 |
(Meters for cold water; meters in vertical position, upwardsflow) |
| DIN 19650-1999 |
灌溉.對灌溉水的衛生要求 |
(Irrigation - Hygienic concerns of irrigation water) |
| DIN 19653-1994 |
灌溉設備.圖形符號.縮寫.圖示.名稱 |
(Irrigation systems - Graphical symbols, letter symbols, signs, terms) |
| DIN 19655-1996 |
灌水.任務.基本原則和方法 |
(Irrigation - Problems, fundamental principles, planning and methods) |
| DIN 19656-1980 |
旋轉式噴灑器.檢驗 |
(Rotating sprinkler; test) |
| DIN 19657-1973 |
水域、堤壩和沙灘的保護.準則 |
(Protection of Watercourses, Dikes, and Coastal Dunes; Guidelines) |
| DIN 19658-2-1994 |
灌溉設備用可卷纏聚乙烯(PE)管和軟管.第2部分:形狀固定的織物芯層軟管.尺寸和供貨技術條件 |
(Polyethylene (PE) coiling pipes and hoses for irrigation systems - Part 2: Hoses with fabric inlay, rigid form; dimensions and technical delivery conditions) |
| DIN 19658-3-1988 |
灌溉設備用可卷纏聚乙烯(PE)管和軟管.帶橡膠布夾層軟管.非固定型.尺寸和供貨技術條件 |
(Polyethylene (PE) coiling pipes and hoses for use in irrigation systems; hoses of nonrigid material with woven fabric inner layer; dimensions and technical delivery conditions) |
| DIN 19660-1991 |
農田水利工程中的風景保護措施 |
(Measures of landscape management in land and water engineering) |
| DIN 19661-1-1998 |
水力工程建筑.立叉建筑.下水道和排水管 |
(Hydraulic structures - Part 1: Crossing works, culvert works and drain works) |
| DIN 19661-2-2000 |
水工結構.指南.第2部分:河底保護結構.立管結構、斜管、格柵和基石 |
(Hydraulic structures - Guidelines - Part 2: River bottom protection structures; drop structures, chutes, cascades, sills) |
| DIN 19663-1985 |
山洪控制.概念.計劃和建筑 |
(Torrent control; terms, planning and construction) |
| DIN 19666-2001 |
排水管道和滲濾管道.一般要求 |
Drain pipes and percolation pipes - General requirements |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com