標準號 |
中文名稱 |
英文名稱 |
| DIN 18234-2-2003 |
防止從下部起火的建筑物用大型屋頂?shù)姆阑鸢踩?第2部分:符合DIN18234-1要求的屋頂列表.無天窗的屋頂面積 |
(Fire safety of large roofs for buildings - Fire exposure from below - Part 2: List of roofs, which fulfil the requirements of DIN 18234-1; Roof areas without openings) |
| DIN 18234-3-2003 |
建筑物大型屋頂?shù)姆阑鸢踩?從下部著火.第3部分:定義、要求及屋頂滲透和屋頂緣的試驗 |
(Fire safety of large roofs for buildings - Fire exposure from below - Part 3: Definitions, requirements and tests at roof penetrations and roof edges) |
| DIN 18234-4-2003 |
建筑物大型屋頂?shù)姆阑鸢踩?從下部著火.第4部分:符合DIN18234-3要求的屋頂滲透和屋頂緣的列表 |
(Fire safety of large roofs for buildings - Fire exposure from below - Part 4: List of roof penetrations and roof edges, which fulfil the requirements of DIN 18234-3) |
| DIN 1824-1981 |
鏟齒刀具用工具制造角銑刀 |
(Tool-making angular cutters for tools with relieved teeth) |
| DIN 1825-1977 |
圓柱齒輪用插齒刀.直齒盤型插齒刀 |
(Pinion-type cutters for cylindrical gears; disc-gear cutters for spur gears) |
| DIN 18250-1999 |
鎖.消防門插鎖 |
(Locks - Mortice locks for fire doors) |
| DIN 18251-1-2002 |
鎖.門用暗鎖.第1部分:折門用榫眼鎖 |
(Locks - Mortice locks - Part 1: Mortice locks for rebated doors) |
| DIN 18251-2-2002 |
鎖.門用暗鎖.第2部分:管型框架門用暗鎖 |
(Locks - Mortise locks - Part 2: Mortise locks for tube frame doors) |
| DIN 18251-3-2002 |
鎖.門用暗鎖.第3部分:多插頭暗鎖 |
(Locks - Mortise locks - Part 3: Mortise locks as multipoint locks) |
| DIN 18252-1999 |
門鎖用截面圓柱體.概念.尺寸.要求.標識 |
(Profile cylinders for door locks - Terminology, dimensions, requirements and marking) |
| DIN 18255-2002 |
建筑用五金件.門把手、背面板和門框.定義、尺寸、要求和作標記 |
(Building hardware - Door lever handles, backplates and escutcheons - Definitions, dimensions, requirements and marking) |
| DIN 18257-2003 |
建筑用小五金.安全門板.定義、尺寸、要求和標志 |
(Building hardware - Security plates - Definitions, measurements, requirements, marking) |
| DIN 1826-1977 |
圓柱齒輪用插齒刀.直齒碗形插齒刀 |
(Pinion-type cutters for cylindrical gears; extended hub gear cutters for spur gears) |
| DIN 18262-1969 |
可調節的無支撐的消防門彈簧鉸鏈 |
(Adjustable Non-load-bearing Spring Hinge for Fire Protecting Doors) |
| DIN 18263-1-1997 |
建筑五金.液壓門鎖.第1部分:用曲軸傳動和螺旋彈簧的上門鎖 |
(Building hardware - Controlled door closing devices with hydraulic damping - Part 1: Surface(top) mounted door closer with crank drive and spiral spring (pot-type door closer)) |
| DIN 18263-4-1997 |
建筑五金.液壓門鎖.帶自動開啟的門鎖(旋轉葉片驅動) |
(Building hardware - Controlled door closing devices - Part 4: Automatic swing-door operator) |
| DIN 18264-1978 |
建筑配件.門用彈簧鉸鏈 |
(Building hardware; spring hinges for doors, single action) |
| DIN 18265-1978 |
建筑配件.門用擺動式彈簧鉸鏈 |
(Building hardware; spring hinges for doors, double action) |
| DIN 18267 Berichtigung 1-2005 |
窗把手.彈簧鎖和可鎖窗把手.DIN 18267-2005的勘誤 |
|
| DIN 18267-2005 |
窗把手.彈簧鎖和可鎖窗把手 |
|
| DIN 18268-1985 |
建筑配件.門鉸鏈.鉸鏈基線 |
(Building hardware; hinges for doors; reference-lines for hinges) |
| DIN 18272-1987 |
防火閘門.防火門框.彈性門框和普通門框 |
(Fire barrieres; hinges for fire doors; spring hinge and supporting hinge) |
| DIN 18273-1997 |
建筑配件.防火門和防煙門用門把手組件.概念.尺寸.要求和檢驗 |
(Building hardware - Lever handle units for fire doors and smoke control doors - Concepts and definitions, dimensions, requirements and testing) |
| DIN 1828-1977 |
圓柱齒輪用插齒刀.直齒帶柄齒輪刀 |
(Pinion-type cutters for cylindrical gears; shank-gear cutters for spur gears) |
| DIN 1829-1-1977 |
圓柱齒輪用插齒刀.規定參數.概念.標記 |
(Pinion-type cutters for cylindrical gears; design, dimensions, definitions, marking) |
| DIN 1829-2-1977 |
圓柱齒輪用插齒刀.公差.允許偏差 |
(Pinion-type cutters for cylindrical gears; tolerances) |
| DIN 18299-2002 |
建筑工程承包合同規程.第C部分:建筑工程通用技術規范.建筑工作各種類型的一般規則 |
(Contract procedures for building works - Part C: General technical specifications for building works; General rules for all kinds of building works) |
| DIN 1830-1-1974 |
安裝在按DIN2079的銑刀軸頭上的內定心鑲刀片的銑刀頭 |
(Inserted blade face milling cutters for internal alignment on spindle noses according to DIN 2079) |
| DIN 1830-3-1974 |
安裝在按DIN6361和DIN6362的銑刀軸頭上的鑲刀片的銑刀頭 |
(Inserted blade face milling cutters for milling machine arbors according to DIN 6361 and DIN 6362) |
| DIN 1830-4-1974 |
安裝在按DIN2079陡圓錐銑刀軸頭上帶雙孔內定心鑲刀片的銑刀頭 |
(Inserted blade face milling cutters for internal alignment, for combined mounting on spindle-noses No 50 and 60 according to DIN 2079) |
| DIN 18300-2002 |
建筑工程承包合同規程.第C部分:建筑工程通用技術規范.土方工程 |
(Contract procedures for building works - Part C: General technical specifications for building works; Earthworks) |
| DIN 18301-2002 |
建筑工程承包合同規程.第C部分:建筑工程通用技術規范.鉆孔工程 |
(Contract procedures for building works - Part C: General technical specifications for building works; Drilling works) |
| DIN 18302-2000 |
建筑工程承包條例.第C部分:建筑工程通用技術規范.井建筑工程 |
(Contract procedures for building works - Part C: General technical specifications for building works; Well construction works) |
| DIN 18303-2002 |
建筑工程承包合同規程.第C部分:建筑工程通用技術規范.鋪設工程 |
(Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV); Timbering to trenchwork) |
| DIN 18304-2000 |
建筑工程承包條例.第C部分:建筑工程通用技術規范.打樁工程 |
(Contract procedures for building works - Part C: General technical specifications in building works; Pile driving) |
| DIN 18305-2000 |
建筑工程承包條例.第C部分:建筑工程通用技術規范.預排水工程 |
(Contract procedures for building works - Part C: General technical specifications for building works (ATV); Predraining works) |
| DIN 18306-2000 |
建筑工程承包條例.第C部分:建筑工程通用技術規范.污水渠工程 |
(Contract procedures for building works - Part C: General technical specifications for building works; Sewage channel works) |
| DIN 18307-2002 |
建筑工程承包合同規程.第C部分:建筑工程通用技術規范.地下壓力管道工程 |
(Contract procedures for building works - Part C: General technical specifications for building works; Works for pressure pipe lines in the ground) |
| DIN 18308-2002 |
建筑工程承包合同規程.第C部分:建筑工程通用技術規范.排水工程 |
(Contract procedures for building works - Part C: General technical specifications for building works; Drainage work) |
| DIN 18309-2002 |
建筑工程承包合同規程.第C部分:建筑工程通用技術規范.灌漿工程 |
(Contract procedures for buildings works - Part C: General technical specifications for building works; Grouting works) |
| DIN 1831-1-1982 |
鑲刀片的三面刃銑刀.尺寸 |
(Side and face milling cutters with inserted cutting blades; dimensions) |
| DIN 1831-2-1990 |
鑲刀片的三面刃銑刀.交貨技術條件 |
(Inserted tooth side and face milling cutters; technical delivery consitions) |
| DIN 18310-2000 |
建筑工程承包條例.第C部分:建筑工程通用技術規范.對河流、堤壩海岸沙灘的安全防御工作 |
(Contracts procedures for buildings works - Part C: General technical specifications for building works; Security works at water, dikes and costal dunes) |
| DIN 18311-2000 |
建筑工程承包條例(VOB).第C部分:建筑工程通用技術規范.挖泥工程 |
(Contract procedures for building works (VOB) - Part C: General technical specifications for building works; Dredging work) |
| DIN 18312-2002 |
建筑工程承包合同規程.第C部分:建筑工程通用技術規范.地下建筑工程 |
(Contract procedures for building works - Part C: General technical specifications for building works; Underground construction work) |
| DIN 18313-2002 |
建筑工程承包合同規程.第C部分:建筑工程通用技術規范.帶支撐液體的心墻工程 |
(Contract procedures for building works - Part C: General technical specifications for building works; Works for diaphragm walls with supporting liquids) |
| DIN 18314-2002 |
建筑工程承包合同規程.第C部分:建筑工程通用技術規范.噴注混凝土工程 |
(Contract procedures for building works - Part C: General technical specifications for building works; Air-placed concrete works) |
| DIN 18315-2000 |
建筑工程承包條例.第C部分:建筑工程通用技術規范.無膠合劑路面層的交通道路建設工程 |
(Contract procedures for building works - Part C: General technical specifications for building works; Construction works for traffic lines, top layers without binders) |
| DIN 18316-2000 |
建筑工程承包條例.第C部分:建筑工程通用技術規范.帶水硬性膠合劑路面層的交通道路建設工程 |
(Contract procedures for building works - Part C: General technical specifications for building works; Construction works for traffic lines, top layers with hydraulic binders) |
| DIN 18317-2000 |
建筑工程承包條例.第C部分:建筑工程通用技術規范.帶瀝青路面層的交通道路建設工程 |
(Contract procedures for building works - Part C: General technical specifications for building works; Construction works for traffic lines, top layers of asphalt) |
| DIN 18318-2000 |
建筑工程承包條例.第C部分:建筑工程通用技術規范.石板路面交通道路建設工程 |
(Contract procedures for building works - Part C: General technical specifications for building works; Construction works for traffic lines, stone and tile pavements, kerbs) |
| DIN 18319-2000 |
建筑工程承包條例.第C部分:建筑工程通用技術規范.管道掘進工程 |
(Contract procedures for building works - Part C: General technical specifications for building works; Pipe drilling works) |
| DIN 18320-2002 |
建筑工程承包合同規程.第C部分:建筑工程通用技術規范.園林設計工程 |
(Contract procedures for building works - Part C: General technical specifications for building works; Landscaping works) |
| DIN 18321-2002 |
建筑工程承包條例.第C部分:建筑工程的一般技術規范.噴射灌漿工程 |
(Contract procedures for building works - Part C: General technical specifications for building works; Jet grouting works) |
| DIN 18325-2002 |
建筑工程承包合同規程.第C部分:建筑工程通用技術規范.鐵路工程 |
(Contract procedures for building works - Part C: General technical specifications for building works; Railway track works) |
| DIN 1833-1-1989 |
圓柱柄角度銑刀.尺寸 |
(Inverse dovetail cutters and dovetail cutters with parallel shank; dimensions) |
| DIN 1833-2-1990 |
圓柱柄角度銑刀.交貨技術條件 |
(Parallel shank dovetail cutters; technical delivery conditions) |
| DIN 18330-2002 |
建筑工程承包合同規程.第C部分:建筑工程通用技術規范.磚砌體工程 |
(Contract procedures for building works - Part C: General technical specifications for building works; Masonry work) |
| DIN 18330-2005 |
建筑工程承包條例.第C部分:建筑工程通用技術規范.磚石砌筑建筑工程 |
|
| DIN 18331-2002 |
建筑工程承包合同規程.第C部分:建筑工程通用技術規范.混凝土和鋼筋混凝土工程 |
(Contract procedures for building works - Part C: General technical specifications for building works; Concrete and reinforced concrete works) |
| DIN 18331-2005 |
建筑工程承包條例.第C部分:建筑工程通用技術規范.混凝土工程 |
|
| DIN 18332-2002 |
建筑工程承包合同規程.第C部分:建筑工程通用技術規范.毛石作業 |
(Contract procedures for building works - Part C: General technical specifications for building works; Ashlar works) |
| DIN 18333-2000 |
建筑工程承包條例.第C部分:建筑工程通用技術規范.鑄石工程 |
(Contract procedures for building works - Part C: General technical specifications for building works; Cast stone works) |
| DIN 18334-2002 |
建筑工程承包合同規程.第C部分:建筑工程通用技術規范.木作和木結構建筑工程 |
(Contract procedures for building works - Part C: General technical specifications for building works; Carpentry and timber construction works) |
| DIN 18334-2005 |
建筑工程承包條例.第C部分:建筑工程通用技術規范.木工和木材建筑工程 |
|
| DIN 18335-2002 |
建筑工程承包合同規程.第C部分:建筑工程通用技術規范.鋼結構建筑工程 |
(Contract procedures for building works - Part C: General technical specifications for building works; Steel construction works) |
| DIN 18336-2002 |
建筑工程承包合同規程.第C部分:建筑工程通用技術規范.防水密封工程 |
(Contract procedures for building works - Part C: General technical specifications for building works; Water-proofing works) |
| DIN 18338-2002 |
建筑工程承包合同規程.第C部分:建筑工程通用技術規范.屋頂鋪設和屋頂密封工程 |
(Contract procedures for building works - Part C: General technical specifications for building works; Roof covering and roof sealing works) |
| DIN 18339-2002 |
建筑工程承包合同規程.第C部分:建筑工程通用技術規范.冷作工 |
(Contract procedures for building works - Part C: General technical specifications for building works; Sheet metal works) |
| DIN 1834-1-1986 |
窄三面刃銑刀.尺寸 |
(Narrow side and face milling cutters; dimensions) |
| DIN 1834-2-1990 |
窄三面刃銑刀.交貨技術條件 |
(Narrow side and face milling cutters; technical delivery conditions) |
| DIN 18340-2005 |
建筑工程用承包條例.第C部分:建筑工程用通用技術規范.干燥施工作業 |
|
| DIN 18345-2005 |
建筑工程用承包條例.第C部分:建筑工程用通用技術規范.熱絕緣復合系統 |
|
| DIN 18349-2002 |
建筑工程承包合同規程.第C部分:建筑工程通用技術規范.混凝土養護工程 |
(Contract procedures for building works - Part C: General technical specifications for building works; Concrete maintainance works) |
| DIN 1835-1-1999 |
銑刀用圓柱柄.第1部分:尺寸 |
(Parallel shanks for milling cutters - Part 1: Dimensions) |
| DIN 1835-2-2000 |
銑刀用直柄.第2部分:卡盤和附件的連接尺寸 |
(Parallel shanks for milling cutters - Part 2: Connecting dimensions for holder chucks, accessories) |
| DIN 18350-2002 |
建筑工程承包合同規程.第C部分:建筑工程通用技術規范.抹灰和拉毛粉刷工作 |
(Contract procedures for building works - Part C: General technical specifications for building works; Plaster and stucco works) |
| DIN 18350-2005 |
建筑工程承包條例.第C部分:建筑工程通用技術規范.石膏和灰泥工程 |
|
| DIN 18350-2005 |
建筑工程承包條例.第C部分:建筑工程通用技術規范.石膏和灰泥工程 |
|
| DIN 18351-2002 |
建筑工程承包合同規程.第C部分:建筑工程通用技術規范.房屋正面工程 |
(Contract procedures for building works - Part C: General technical specifications for building works; Facade works) |
| DIN 18352-2002 |
建筑工程承包合同規程.第C部分:建筑工程通用技術規范.鋪瓦作業 |
(Contract procedures for building works - Part C: General technical specifications for building works; Tile laying works) |
| DIN 18353-2002 |
建筑工程承包合同規程.第C部分:建筑工程通用技術規范.地板找平工程 |
(Contract procedures for building works - Part C: General technical specifications for building works; Floor screed works) |
| DIN 18353-2005 |
建筑工程承包條例.第C部分:建筑工程通用技術規范.地板找平層工程 |
|
| DIN 18354-2002 |
建筑工程承包合同規程.第C部分:建筑工程通用技術規范.敷瀝青作業 |
(Contract procedures for building works - Part C: General technical specifications for building works; Asphalt flooring works) |
| DIN 18355-2002 |
建筑工程承包合同規程.第C部分:建筑工程通用技術規范.細木工制作工程 |
(Contract procedures for building works - Part C: General technical specifications for building works; Joinery works) |
| DIN 18355-2005 |
建筑工程承包條例.第C部分:建筑工程通用技術規范.細木工工程 |
|
| DIN 18356-2002 |
建筑工程承包合同規程.第C部分:建筑工程通用技術規范.鑲木地板工程 |
(Contract procedures for building works - Part C: General technical specifications for building works; Parquet works) |
| DIN 18357-2002 |
建筑工程承包合同規程.第C部分:建筑工程通用技術規范.門窗配件安裝 |
(Contract procedures for building works - Part C: General technical specifications for building works; Mounting of window and door fittings) |
| DIN 18358-2000 |
建筑工程承包條例.第C部分:建筑工程通用技術規范.滾動遮板工程 |
(Contract procedures for building works - Part C: General technical specifications for building works; Roller shutter works) |
| DIN 1836-1984 |
切削加工的工具應用組 |
(Groups of tool application for chip removal) |
| DIN 18360-2002 |
建筑工程承包合同規程.第C部分:建筑工程通用技術規范.金屬結構工程 |
(Contract procedures for building works - Part C: General technical specifications for building works; Metal construction works) |
| DIN 18361-2002 |
建筑工程承包合同規程.第C部分:建筑工程通用技術規范.玻璃裝配工程 |
(Contract procedures for building works - Part C: General technical specifications for building works; Glazing works) |
| DIN 18363-2002 |
建筑工程承包合同規程.第C部分:建筑工程通用技術規范.噴漆工程 |
(Contract procedures for building works - Part C: General technical specifications for building works; Painting works) |
| DIN 18364-2000 |
建筑工程承包條例.第C部分:建筑工程通用技術規范.鋼和鋁結構的防腐工程 |
(Contract procedures for building works - Part C: General technical specifications for building works; Works for protection of steel and aluminium structures) |
| DIN 18365-2002 |
建筑工程承包合同規程.第C部分:建筑工程通用技術規范.鋪地面作業 |
(Contract procedures for building works - Part C: General technical specifications for building works; Flooring works) |
| DIN 18366-2002 |
建筑工程承包合同規程.第C部分:建筑工程通用技術規范.裱糊工程 |
(Contract procedure for building works - Part C: General technical specifications for building works; Wall paper hanging) |
| DIN 18367-2002 |
建筑工程承包合同規程.第C部分:建筑工程通用技術規范.木塊鋪砌路面工程 |
(Contract procedures for building works - Part C: General technical specifications for building works; Wood blocks paving works) |
| DIN 1837-1970 |
金屬用圓鋸片.細齒 |
(Circular Metal Slitting Saw Blades; Fine-toothed) |
| DIN 18379-2002 |
建筑工程承包合同規程.第C部分:建筑工程通用技術規范.房間通風系統 |
(Contract procedures for building works - Part C: General technical specifications for building works; Room ventilation systems) |
| DIN 1838-1970 |
金屬用圓鋸片.粗齒 |
(Circular Metal Slitting Saw Blades; Coarse-toothed) |
| DIN 18380-2002 |
建筑工程承包合同規程.第C部分:建筑工程通用技術規范.加熱和中央水加熱系統 |
(Contract procedures for building works - Part C: General technical specifications for building works; Systems for heating and central water heating) |
| DIN 18381-2002 |
建筑工程承包合同規程.第C部分:建筑工程通用技術規范.建筑物內部的氣、水和廢水管道工程 |
(Contract procedures for building works - Part C: General technical specifications for building works; Gas, water and sewage plumbing works inside of buildings) |
| DIN 18382-2002 |
建筑工程承包合同規程.第C部分:建筑工程通用技術規范.標稱電壓小于等于36kV的低壓設備和中壓設備 |
(Contract procedures for building works - Part C: General technical specifications for building works; Low-voltage installation and medium-voltage installation with nominal voltages up to including 36 kV) |
| DIN 18384-2000 |
建筑工程承包條例.第C部分:建筑工程通用技術規范.避雷設備 |
(Contract procedure for building works - Part C: General technical specifications for building works; Lightning protection systems) |
| DIN 18385-2002 |
建筑工程承包合同規程.第C部分:建筑工程通用技術規范.輸送設備、電梯、自動扶梯和自動人行道 |
(Contract procedures for building works - Part C: General technical specifications for building works; Conveying installations, lifts, escalators and moving walkways) |
| DIN 18386-2002 |
建筑工程承包合同規程.第C部分:建筑工程通用技術規范.建筑物內的自動化裝置 |
(Contract procedures for building works - Part C: General technical specifications for building works; Automation installations in buildings) |
| DIN 1840-1970 |
金屬用圓鋸片齒形.傾面自由磨削制造精度 |
(Circular Metal Slitting Saw Blades; Tooth Forms, Side Clearance, Manufacturing Tolerances) |
| DIN 18421-2000 |
建筑工程承包條例.第C部分:建筑工程通用技術規范.技術設備的隔熱措施 |
(Contract procedures for building works - Part C: General technical specifications for building works; Insulation works on technical installations) |
| DIN 1843-1974 |
機床.機床漆色.灰色 |
(Machine Tools; Painting of Machines, Grey) |
| DIN 1844-1974 |
機床.機床漆色.綠色 |
(Machine Tools; Painting of Machines, Green) |
| DIN 18451-2002 |
建筑工程承包合同規程.第C部分:建筑工程通用技術規范.腳手架工作 |
(Contract procedure for building works - Part C: General technical specifications for building works; Scaffolding works) |
| DIN 18460-1989 |
建筑物外部雨水管與檐槽.術語.測量原則 |
(External rainwater pipes and eaves gutters; concepts and design principles) |
| DIN 18462-1991 |
圓形雨水管用彎管.檢驗 |
(Pipe bends for rainwater pipes of circular cross-section; testing) |
| DIN 1850-3-1998 |
滑動軸承.燒結金屬制套筒 |
(Plain bearings - Part 3: Sintermetal bushes) |
| DIN 1850-4-1998 |
滑動軸承.第4部分:人造石墨制軸套 |
(Plain bearings - Part 4: Artificial carbon bushes) |
| DIN 1850-5-1998 |
滑動軸承.第5部分:熱固性塑料制軸套 |
(Plain bearings - Part 5: Thermoset plastic bushes) |
| DIN 1850-6-1998 |
滑動軸承.第6部分:熱塑塑料制軸套 |
(Plain bearings - Part 6: Thermoplastic bushes) |
| DIN 18500-1991 |
混凝土石料.術語、要求、試驗、檢查 |
(Cast stones; terminology, requirements, testing, inspection) |
| DIN 18501-1982 |
混凝土鋪路石 |
(Concrete pavement setts) |
| DIN 18506-2002 |
液壓道路粘結劑.組分、規范和合格標準 |
(Hydraulic road binders - Composition, specifications and conformity criteria) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com