標準號 |
中文名稱 |
英文名稱 |
| DIN 74362-1-1982 |
載重汽車掛車及大客車掛車用帶有壓入深度及8個螺栓緊固的盤輪制動鼓.最大外廓 |
(Brake drums for offset disc wheels of truck and bus trailers with 8 bolt mounting; maximum outline) |
| DIN 74362-10-1980 |
有陡邊輪緣的載重汽車及其掛車用帶有壓入深度.用10個螺栓緊固的盤輪制動鼓.最大外廓 |
(Brake drums for inset disk wheels of commercial vehicles and their trailers with 10 bolt fastening; maximum outline) |
| DIN 74362-2-1982 |
載重汽車掛車及大客車掛車用帶有壓入深度及10個螺栓緊固的盤輪制動鼓.最大外廓 |
(Brake drums for offset disc wheels of truck and bus trailers with 10 bolt mounting; maximum outline) |
| DIN 74362-3-1982 |
載重汽車掛車及大客車掛車用不帶壓入深度.帶8個或10個螺栓緊固的盤輪制動鼓.最大外廓 |
(Brake drums for disc wheels without offset of truck and bus trailers with 8 or 10 bolt mounting; maximum outline) |
| DIN 74362-4-1982 |
載重汽車用帶有壓入深度.用8個螺栓緊固的盤輪制動鼓.最大外廓 |
(Brake drums for offset disc wheels of commercial vehicles with 8 bolt mounting; maximum outline) |
| DIN 74362-5-1982 |
載重汽車用帶有壓入深度用10個螺栓緊固的盤輪制動鼓.最大外廓 |
(Brake drums for offset disc wheels of commercial vehicles with 10 bolt mounting; maximum outline) |
| DIN 74362-6-1982 |
載重汽車用不帶壓入深度用8個或10個螺栓緊固的盤輪制動鼓.最大外廓 |
(Brake drums for disc wheels without offset of commercial vehicles with 8 or 10 bolt mounting; maximum outline) |
| DIN 74362-7-1987 |
15英寸輪圈的載重汽車用不帶壓入深度用6個或10個螺栓緊固的盤輪制動鼓.最大外廓 |
(Brake drums for disc wheels with rim diameter designation 15 without offset for 6 or 10 bolt mounting, maximum outline) |
| DIN 74362-8-1987 |
15英寸輪圈的載重汽車用帶有壓入深度.用6個或10個螺栓緊固的盤輪制動鼓.最大外廓 |
(Brake drums for offset disc wheels rim diameter designation 15 for 6 or 10 bolt mounting; maximum outline) |
| DIN 74363-1-1982 |
帶有輪連接件ＢＺ5×112的轎車掛車的制動鼓.最大外廓 |
(Brake drums for passenger car trailers with 5 bolt mounting and pitch circle dia. 112 mm (BZ 5112); maximum outline) |
| DIN 74363-2-1982 |
帶有輪連接件ＢＺ5×120的轎車掛車的制動鼓.最大外廓 |
(Brake drums for passenger car trailers with 5 bolt mounting and pitch circle dia. 120 mm (BZ 5120); maximum outline) |
| DIN 7437-1998 |
1000V以下的絕緣工具.有槽螺釘用旋具 |
(Insulated tools up to 1000 V - Screwdrivers for slotted head screws) |
| DIN 74371-1-1979 |
摩托車的撓曲輪輻 |
(Spokes, bend off, for motorcycles) |
| DIN 74371-2-1979 |
輪輻.摩托車輪輻的內接頭 |
(Nipples for spokes for motorcycles) |
| DIN 7439-1998 |
1000V以下的絕緣工具.內六角螺釘用旋具 |
(Insulated tools up to 1000 V - Keys with handle for hexagon socket screws) |
| DIN 7441-1968 |
鍛工羊角砧 |
(Anvil horn) |
| DIN 7442-1968 |
鍛工方柄鑿 |
(Blacksmiths` hardy) |
| DIN 7444-1982 |
棒形單頭梅花扳手 |
(Slugging wrenches, box) |
| DIN 7445-1998 |
1000V以下的絕緣工具.帶手柄的套筒旋具 |
(Insulated tools up to 1000 V - Socket wrenches, spin type) |
| DIN 7446-1998 |
1000V以下的絕緣工具.單頭開固定口旋具 |
(Insulated tools up to 1000 V - Engineer wrenches, single head) |
| DIN 7447-1998 |
1000V以下電壓的絕緣工具.單頭高頸梅花旋具 |
(Insulated tools up to 1000 V - Box (ring) wrenches, single end, deep offset) |
| DIN 7448-1998 |
1000V以下的絕緣工具.手動六角頭螺釘用內四角套筒旋具組件 |
(Insulated tools up to 1000 V - Square drive socket wrenches, hand operated) |
| DIN 7449-1998 |
1000V以下的絕緣工具.帶有外四方頭的棘輪 |
(Insulated tools up to 1000 V - Ratchet handles) |
| DIN 7461-1969 |
細木工用木錘 |
(Carpenters mallets) |
| DIN 7462-1970 |
木錘 |
(Wooden hammers) |
| DIN 7463-1972 |
五金配件.掛鎖用的搭扣和止動件 |
(Padlock staples and swivel hasps) |
| DIN 7464-1983 |
嵌入式箱用鎖 |
(Case lock; flush type) |
| DIN 7465-1966 |
掛鎖 |
(Padlocks) |
| DIN 7469-1983 |
箱角保護套 |
(Corner protection for boxes) |
| DIN 747-1976 |
機器的軸高 |
(Shaft heights for driving and driven machines) |
| DIN 7472-1-1985 |
安全器械；鋁制附件；尺寸.交貨技術條件 |
(Safety harness; aluminium fittings; dimensions, technical delivery conditions) |
| DIN 7472-2-1991 |
安全器械.鋼制附件.連接尺寸.安全技術要求和檢驗 |
(Safety harness; steel fittings; connecting dimensions, safety requirements and testing) |
| DIN 7473-1983 |
滑動軸承.圓柱形孔整體厚壁多層滑動軸承 |
(Plain bearings; thick-walled multilayer plain bearings with cylindrical bore, undivided) |
| DIN 7474-1983 |
滑動軸承.圓柱形孔分開的厚壁多層滑動軸承 |
(Plain bearings; thick-walled multilayer plain bearings with cylindrical bore, divided) |
| DIN 7477-1983 |
滑動軸承.厚壁多層滑動軸承的潤滑油腔 |
(Plain bearings; bore reliefs for thick-walled multilayer plain bearings) |
| DIN 7478-1993 |
安全帶狀裝置.采礦時身體上部用安全帶 |
(Safety harnesses - Upper body harness for mining) |
| DIN 748-1-1970 |
圓柱形軸端.尺寸.額定傳矩 |
(Cylindrical Shaft Ends; Dimensions, Nominal Transmissible Torques) |
| DIN 748-3-1975 |
電機的圓柱形軸端 |
(Cylindrical Shaft Ends for Electrical Machines) |
| DIN 7480-1966 |
木工鉆.單槽麻花鉆 |
(Wood bits; single fluted twist bits (twist drills)) |
| DIN 7481-1966 |
木工鉆.長柄螺旋鉆 |
(Wood bits; single twist hand angers (gimlet bits)) |
| DIN 7482-1966 |
帶孔的木鉆用木柄 |
(Wooden handles for eyed wood bits) |
| DIN 7483-1966 |
木工鉆.采伐木用鉆和美工用鉆 |
(Wood bits; Forstner bits and multi spur machine bits) |
| DIN 7487-1966 |
木工鉆.雙槽麻花鉆 |
(Wood bits; two fluted twist bits (twist drills)) |
| DIN 7489-1969 |
木工鉆.空心麻花鉆 |
(Wood bits; hollow augers) |
| DIN 7490-1993 |
木材加工用麻花鉆.模板鉆和裝修鉆 |
(Twist drills for woodworking; boarding and plumbing augers) |
| DIN 7500-1-2000 |
ISO米制螺紋的滾絲螺釘.第1部分:型號、名稱與符號、要求 |
(Thread rolling screws for metric ISO thread - Part 1: Types, designation, requirements) |
| DIN 7500-2-1984 |
ISO米制螺紋內螺紋滾壓的螺釘.孔徑的標準值 |
(Thread rolling screws for ISO metric thread; guideline values for hole diameters) |
| DIN 75001-1981 |
汽車測量?jī)x器的應用級別 |
(Classes of Application for Measuring Devices in Motor Vehicles) |
| DIN 75012-1986 |
公路液罐車.測液位裝置.連接尺寸 |
(Road tankers; dipstick assembly; mating dimensions) |
| DIN 75013-1979 |
公路液罐車.接地搭板.連接尺寸 |
(Tank trucks; grounding plate, dimensions) |
| DIN 75014-1991 |
公路液罐車用拱頂蓋.圓形.連接尺寸 |
(Dome cover for tank trucks, cylindrical; dimensions) |
| DIN 75031-1995 |
載貨汽車和掛車.調車.信號裝置.要求和檢驗 |
(Commercial vehicles and towed vehicles - Obstacle detection devices during reversing - Requirements and tests) |
| DIN 75077-1992 |
行走不便的人員用車輛.概念.要求.檢驗 |
(Busses for disabled persons - Definitions, requirements, test) |
| DIN 75078-1-1990 |
殘疾人用汽車(BTW).概念.要求.檢驗 |
(Motor vehicle for the transportation of handicapped persons; definitions, requirements, test) |
| DIN 75078-1-2004 |
殘疾人運送用汽車.第1部分:術語、定義、要求和試驗 |
|
| DIN 75078-2-1999 |
殘疾人用汽車(BTW).第2部分:減震系統.概念.要求.檢驗 |
(Motor vehicle for the transportation of handicapped persons - Part 2: Restraint systems; concepts, requirements, testing) |
| DIN 75079 Berichtigung 1-2004 |
對DIN 75079-2002的勘誤 |
|
| DIN 75079-1993 |
急救醫療車.概念、要求、檢驗 |
(Fast emergency car for first aid by special medical doctor; concepts, requirements, test) |
| DIN 75081-1990 |
運尸體的汽車(BKW) |
(Hearse) |
| DIN 7513-1995 |
切削螺紋螺釘.六角頭螺釘.槽螺釘.尺寸.要求.檢驗 |
(Thread cutting screws - Hexagon screws and slotted head screws - Dimensions, requirements, testing) |
| DIN 7516-1995 |
帶十字槽螺紋切削螺釘.尺寸.要求和檢驗 |
(Thread cutting screws - Cross recessed head screws - Dimensions, requirements, testing) |
| DIN 75200-1980 |
汽車內部設備用材料燃燒性能測定 |
(Determination of burning behaviour of interior materials in motor vehicles) |
| DIN 75201-1992 |
道路汽車內擋風玻璃的霧氣凝結性能的測定 |
(Determination of the windscreen fogging characteristics of trim materials in motor vehicles) |
| DIN 75203-1988 |
載重汽車的全自動集中潤滑設備 |
(Automatic centralized lubrication systems for commercial vehicles) |
| DIN 75204 Bb.1-1992 |
公路車輛.交通事故分析和損壞的機械裝置.關鍵詞索引 |
(Road vehicles; traffic accident analysis; index) |
| DIN 75204-1-1992 |
公路車輛.交通事故分析和損壞的機械裝置.交通事故分析的概念 |
(Road vehicles; traffic accident analysis; concepts associated with accident reconstruction) |
| DIN 75204-2-1992 |
公路車輛.交通事故分析和損壞的機械裝置.軌跡類型和軌道特點的概念 |
(Road vehicles; traffic accident analysis; concepts associated with trace types and characteristics) |
| DIN 75204-3-1992 |
公路車輛.交通事故分析和損壞的機械裝置.數據收集研究的概念 |
(Road vehicles; traffic accident analysis and mechanics of injury; concepts allocated with data collection) |
| DIN 75220-1992 |
太陽模擬設備中汽車組件的老化 |
(Ageing of automotive components in solar simulation units) |
| DIN 7523-2-1986 |
鋼鍛件.模鍛件的造型.加工余量.拔模斜度.棱角倒圓.空槽.底厚.壁厚.筋板寬度及筋頂?shù)箞A |
(Steel forgings; design of drop and press forgings; machining allowances, drafts, edge radii, fillet radii, base thicknesses, wall thicknesses, rib widths, and rib radii) |
| DIN 7527-1-1971 |
鋼鍛件.自由鍛造的圓盤的加工余量及允許偏差 |
(Steel Forgings; Machining Allowances and Permissible Variations for Open-die Forged Discs) |
| DIN 7527-2-1971 |
鋼鍛件.自由鍛造的帶孔圓盤的加工余量及允許偏差 |
(Steel Forgings; Machining Allowances and Permissible Variations for Open-die Forged Pierced Discs) |
| DIN 7527-3-1971 |
鋼鍛件.自由鍛造的圓環的加工余量及允許偏差 |
(Steel Forgings; Machining Allowances and Permissble Variations for Seamless Open-die Forged Rings) |
| DIN 7527-4-1972 |
鋼鍛件.自由鍛造的套筒的加工余量及允許偏差 |
(Steel Forgings; Machining Allowances and Permissible Variations for Seamless Open-die Forged Bushes) |
| DIN 7527-5-1972 |
鋼鍛件.自由鍛造的滾壓及焊接圓環的加工余量及允許偏差 |
(Steel Forgings; Machining Allowances and Permissible Variations for Open-die Forged Rolled and Welded Rings) |
| DIN 7527-6-1975 |
鋼鍛件.自由鍛造的棒件的加工余量及允許偏差 |
(Steel Forgings; Machining Allowances and Permissible Variations for Open-die Forged Bars) |
| DIN 75302-1991 |
轎車的頂部載荷粱.安全技術要求.檢驗 |
(Roof racks for passenger cars; requirements and testing) |
| DIN 7540-1980 |
環鉤.質量等級5 |
(Eye hooks, grade 5) |
| DIN 75400-1980 |
汽車安全帶的閉鎖裝置 |
(Seat belt buckles in motor vehicles) |
| DIN 75405-1980 |
轎車用滅火器架.要求.檢驗 |
(Fixtures for fire extinguishers in passenger cars; requirements, tests) |
| DIN 75406-1982 |
轎車中急救材料的裝置.要求.檢驗 |
(Fixtures for first aid material in passenger cars; requirements, test) |
| DIN 75407-1986 |
轎車內的報警器三角架.要求.檢驗 |
(Fixtures for advance warning triangle in passenger cars; requirements, tests) |
| DIN 7541-1984 |
起重設備.質量等級5.大眼環鉤 |
(Lifting appliances; large-eye hooks; grade 5) |
| DIN 75410-1-2003 |
載貨車的安全性.第1部分:最大載重量為3.5噸的商用運貨車的緊固點.最低要求 |
(Securing of cargo road vehicles - Part 1: Lashing points on commercial vehicles for goods transportation up to a total mass of 3,5 t; Minimum requirements) |
| DIN 75410-2-1995 |
道路車輛裝貨保險裝置.第2部分:小客車.沿途零擔貨車、客貨兩用車和多用途客車的裝貨保險裝置 |
(Securing of cargo in road vehicles - Part 2: Securing of cargo in passenger cars, station wagons and multi-purpose passenger cars) |
| DIN 75410-2-2005 |
道路車輛中貨物的固定.第2部分:乘用車、客貨兩用車和多用途乘用車中貨物的固定 |
|
| DIN 75410-3-1996 |
道路車輛裝貨保險裝置.第3部分:箱式汽車裝貨保險裝置 |
(Securing of cargo in road vehicles - Part 3: Securing of cargo in cargo minivans) |
| DIN 75410-3-2004 |
道路車輛上貨物的固定.第3部分:旅行貨車中貨物的固定 |
|
| DIN 75490-1993 |
汽車用無線電設備.安裝位置.一般要求 |
(Radio communication devices in motor vehicles; installation space, general requirements) |
| DIN 75501-1987 |
汽車的儀表板和測量?jī)x器 |
(Instrument panel-measuring instruments for motor vehicles; built-in diameters) |
| DIN 75521-1-1992 |
摩托車前燈上裝的里程速度表 |
(Speedometer headlamp mounting for motorcycles) |
| DIN 75521-2-1992 |
汽車儀表板上裝的里程速度表 |
(Speedometer instrument panel mounting for motor vehicles) |
| DIN 75532-1-1976 |
旋轉運動的傳遞.與齒輪連接的型式.中間齒輪.撓性驅動軸與裝置 |
(Transmission of rotary motions; Types of connection to gears, intermediate gears, flexible drive shafts and equipment) |
| DIN 75532-2-1979 |
旋轉運動的傳遞.撓性驅動軸 |
(Transmission of rotary motions; Flexible drive shafts) |
| DIN 75551-1988 |
汽車的壓力計 |
(Pressure gauges for automobiles) |
| DIN 75553-1992 |
壓力傳感器 |
(Pressure sensor) |
| DIN 75554-1992 |
壓力表 |
(Pressure gauges) |
| DIN 75575-1992 |
汽車用遙測溫度計 |
(Temperatur gauges for motor vehicles) |
| DIN 7584-1980 |
家用安裝水管配件.壓力為10巴的平密封墊帶外螺紋的鋼管頭 |
(Water-fittings for house installation; steal tube nozzles with external thread, flat sealing up to working pressure of 10 bar) |
| DIN 7585-1980 |
家用安裝水管配件.壓力為10巴的平密封軟管口 |
(Water-fittings for house installation; sleeves, flat sealing up to work pressure of 10 bar) |
| DIN 7591-1981 |
家用安裝水管配件.最大允許壓力到10巴的兩端用軟管連接的帶密封螺接頭 |
(Water fittings for domestic installation; Screwed unions with flat gasket for hose connection on either side, designed for nominal pressure 10) |
| DIN 7592-1981 |
家用安裝水管配件.銅管流咀.公稱壓力10 |
(Water-fittings for house installation; copper tube nozzles up to working pressure of 10 bar) |
| DIN 7593-1981 |
家用安裝水管配件.最大工作壓力為10巴以下的兩端用銅管連接的帶密封螺旋連接 |
(Water fittings for domestic installation; Screwed unions with gasket for connection to copper tube on either side, designed for nominal pressure 10) |
| DIN 76-1-1983 |
螺紋尾部.按DIN13的ISO米制螺紋的螺紋退刀槽 |
(Thread run-outs and thread undercuts for ISO metric threads in accordance with DIN 13) |
| DIN 76-1-2004 |
符合DIN 13-1的ISO米制螺紋的螺紋尾部和螺紋切槽 |
|
| DIN 76-2-1984 |
按DINISO228第1部分管螺紋的螺紋尾部和螺紋底切 |
(Thread run-outs and thread undercuts for pipe threads conforming to ISO 228 part 1) |
| DIN 76-3-1977 |
梯形螺紋.鋸齒螺紋和圓形螺紋及其他粗牙螺紋的螺紋尾部和螺紋退刀槽 |
(Runouts, Undercuts for Trapezoidal Threads, Buttress Threads and Knuckle Threads and other Threads of Coarse Pitch) |
| DIN 7601-1998 |
帶球形襯套的管螺紋連接.全螺紋連接和概述 |
(Compression couplings with ball-type nipples - Complete unions and survey) |
| DIN 76024-1984 |
汽車的手動底部杠桿.安全技術要求.檢驗 |
(Manual operated jacks for motor vehicles, safety requirements and tests) |
| DIN 7603-2001 |
密封環 |
(Sealing rings) |
| DIN 76031-1979 |
救助汽車用的鋼絲繩 |
(Steel wire ropes for road vehicle salvage) |
| DIN 76032-1979 |
救助汽車用的鋼絲繩嵌環 |
(Thimbles for steel wire ropes for road vehicle salvage) |
| DIN 76033-1993 |
轎車的牽引鋼絲繩.要求、檢驗、監督 |
(Tow ropes for passenger cars; requirements, testing, inspection) |
| DIN 7604-1992 |
六角頭螺旋塞.輕載圓柱螺紋 |
(Hexagon head screw plugs; light type, cylindrical thread) |
| DIN 76051-1-1992 |
汽車和掛車的調整楔 |
(Wheel chocks for motor vehicles and trailers) |
| DIN 76051-2-1976 |
農用車輛的調整鍵.工作尺寸 |
(Wheel chocks for agricultural vehicles; functional dimensions) |
| DIN 76060-1983 |
載重汽車上懸臂設備用的加固板 |
(Fitting sheets for front mounted implements on commercial vehicles) |
| DIN 762-1-1992 |
連續輸送機用經過校正和檢驗的鏈環節距為5d的2級圓鋼鏈 |
(Calibrated and tested round steel link chains for continuous conveyors; grade 2, pitch 5d) |
| DIN 762-2-1992 |
連續輸送機用經過校正和檢驗的鏈環節距為5d的3級圓鋼鏈 |
(Calibrated and tested round steel link chains for continuous conveyors; grade 3, pitch 5d) |
| DIN 763-1990 |
不按量規檢驗的長環節圓鋼鏈 |
(Tested, non-calibrated, long-link round steel chains) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com