標準號 |
中文名稱 |
英文名稱 |
| DIN 6700-5-2002 |
鐵路車輛及車輛部件的焊接.第5部分:質量要求 |
(Welding of railway vehicles and parts - Part 5: Quality requirements) |
| DIN 6700-6-2000 |
鐵路車輛及車輛部件的焊接.第6部分:外輪廓材料、填充金屬和焊接工藝 |
(Welding of railway vehicles and parts - Part 6: Materials, filler metals, welding processes, outlines) |
| DIN 6721-2-2000 |
數據處理用紙.連續式表格用40至90克/平方米紙.第2部分:自復制特性.試驗方法 |
(Papers for data processing - 40-g/m to 90 g/m paper for continuous forms - Part 2: Self-copying properties; test methods) |
| DIN 6723-1-1997 |
數據處理用紙.文件分類閱讀機用90克/平方米紙.第1部分:無覆面無涂層.要求.檢驗 |
(Papers for data processing - Paper for document reader sorter 90-g/m-substance - Part 1: Uncoated, untreated; requirements, test requirements) |
| DIN 6723-2-1997 |
數據處理用紙.文件分類閱讀機用90克/平方米紙.第1部分:帶覆面帶涂層本身帶復寫.要求,檢驗 |
(Papers for data processing - Paper for document reader sorter 90-g/m-substance - Part 2: Coated, treated, self copying; requirements, test method) |
| DIN 6724-1-1997 |
數據處理用紙.文件分類閱讀機用65-85克/平方米紙.第1部分:無覆面無涂層.要求,檢驗 |
(Papers for data processing - Paper for document reader sorter 65- to 85-g/m-substance - Part 1: Uncoated, untreated; requirements, test method) |
| DIN 6724-2-1997 |
數據處理用紙.文件分類閱讀機用65-85克/平方米紙.第2部分:帶覆面帶涂層本身帶復寫.要求,檢驗 |
(Papers for data processing - Paper for document reader sorter 65- to 85-g/m-substance - Part 2: coated, treated, self copying; requirements, test method) |
| DIN 6730 Bb.1-2001 |
紙和紙板.詞匯.DIN6730和DIN19303術語的對應 |
(Paper and board - Vocabulary; Opposition of terms of DIN 6730 and DIN 19303) |
| DIN 6730-2003 |
紙和紙板.詞匯 |
(Paper and board - Vocabulary) |
| DIN 6733-1998 |
紙.信封紙.要求,檢驗 |
(Paper - Envelope paper - Requirements, test methods) |
| DIN 6735-2000 |
紙,紙板,和紙漿.術語和定義概況 |
(Paper, board and pulpes - Survey of terms and definitions) |
| DIN 6735-2004 |
紙、紙板和紙漿.術語和定義概況 |
(Paper, board and pulps - Survey of terms and definitions) |
| DIN 6735-2004 |
紙、紙板和紙漿.術語和定義概況 |
|
| DIN 6737-2002 |
紙和紙板.辦公紙板的要求和試驗方法 |
(Paper and board - Office board - Requirements, test methods) |
| DIN 6738-1999 |
紙和紙張.壽命等級 |
(Paper and paper board - Lifespan classes) |
| DIN 674-1993 |
平圓頭鉚釘.公稱直徑1.4至6mm |
(Flat round head rivets; nominal diameters 1,4 to 6 mm) |
| DIN 6743-1998 |
粗壁紙.多層粗壁紙.雙層壁紙 |
(Wallpaper base - Wallpaper base multi-layer - Duplexed wallpaper base) |
| DIN 6744-1992 |
粗壁紙.粗壁紙和成品壁紙的可剝離性以及可分開性的測定 |
(Wallpaper base; determination of strippability and peelability of wallpaper base and of wallpaper (wallcoverings)) |
| DIN 675-1993 |
平沉頭鉚釘(皮帶鉚釘).公稱直徑3至5mm |
(Flat countersunk head rivets; nominal diameters 3 to 5 mm) |
| DIN 67500-1987 |
水閘設備照明.要求.計算及測量 |
(Illumination of lock areas; requirements, design and measurement) |
| DIN 67501-1999 |
人體皮膚外用的陽光照射防護劑的紅斑防護的實驗評估 |
(Experimental evaluation of the protection from erythema of external sunscreen products for the human skin) |
| DIN 67502-2005 |
通過測量與防曬指數有關的透射率表征皮膚防曬品的防紫外線特性 |
|
| DIN 67510-1-2002 |
發光顏料和產品.第1部分:在生產廠家作的測量和標記 |
(Photoluminescent pigments and products - Part 1: Measurement and marking at the producer) |
| DIN 67510-2-2002 |
發光顏料和產品.第2部分:發光產品的現場測量 |
(Photoluminescent pigments and products - Part 2: Measurement of phosphorescent products on site) |
| DIN 67510-3-1994 |
有長時間余輝的發光顏料和產品.長時間余輝的安全傳導系統 |
(Photoluminescent pigments and products; escape route system) |
| DIN 67510-3-2004 |
熒光顏料和產品.第3部分:低位置照明系統 |
|
| DIN 67510-4-1996 |
有長時間余輝的發光顏料和產品.第4部分:長時間余輝的安全傳導系統用產品.印記和標識 |
(Phosphorescent pigments and products - Part 4: Products for phosphorescent escape route system; markings and applications) |
| DIN 67519-1970 |
光學范圍內的光化性.概念.測量.應用 |
(Actinity in the field of optics; definition, measurement, application) |
| DIN 67520-1-1994 |
交通安全用反光材料.反光器和反光材料的照明技術評估.測量和標識 |
(Retro-reflecting materials for traffic safety; photometric evaluation, measurement and characterization of retroreflectors and retro-reflecting sheetings) |
| DIN 67520-2-1994 |
交通安全用反光材料.交通標志用反光材料的光學最低要求 |
(Retro-reflecting materials for traffic safety; photometric minimum requirements for retro-reflective sheetings for traffic signs) |
| DIN 67520-4-1999 |
交通安全用反光材料.第4部分:反射物質微棱鏡材料上光技術的最低要求 |
(Retro-reflecting materials for traffic safety - Part 4: Photometric minimum requirements for retro-reflective sheeting of microprismatic construction) |
| DIN 67520-4-2005 |
交通安全用反光材料.第4部分:微棱鏡結構物反光板的光測量最低要求 |
|
| DIN 67523-1-1988 |
帶輔助照明的人行過道采光.一般質量特征和標準 |
(Lighting of pedestrian crossings (sign 293 StVO) with additional lighting; general quality characteristics and guide values) |
| DIN 67523-2-1988 |
帶輔助照明的人行過道采光.(標志293stvo).計算和測量 |
(Lighting of pedestrian crossings (sign 293 StVO) with additional lighting; calculation and measurement) |
| DIN 67524-1-1987 |
地下隧道與通道的照明.一般質量特性和標準值 |
(Lighting of street tunnels and underpasses; general quality characteristics and guide values) |
| DIN 67524-2-1992 |
隧道和地下通道的照明.計算和測量 |
(Lighting of street tunnels and underpasses; calculation and measurement) |
| DIN 67526-3-1976 |
體育場照明.日光照明準則 |
(Sports lighting; requirements of daylighting) |
| DIN 67527-1-2001 |
交通信號燈的光技術性能.道路交通固定式信號燈 |
(Photometric properties of signal lights in traffic - Stationary signal lights for road traffic) |
| DIN 67527-2-1988 |
交通信號燈的光技術性能.街道上工作現場.建筑工地.道路事故多發區的固定式信號燈 |
(Photometric properties of signal lights for traffic; stationary signals for working-areas; sites and danger-areas on roads) |
| DIN 67530-1982 |
平面涂料覆層及塑料表面光澤鑒定用的反射計 |
(Reflectometer as a means for gloss assessment of plane surfaces of paint coatings and plastics) |
| DIN 67544-1985 |
交通信號燈用圓電桿.尺寸 |
(Cylindrical columns for traffic lights; measures) |
| DIN 6763-1985 |
標準號.基本概念 |
(Numbering; general concepts) |
| DIN 6771-1-1970 |
圖紙上的標題欄.配置與零件表 |
(Title Blocks for Drawings, Plans and Lists) |
| DIN 6771-2-1987 |
技術資料的印樣.零件表 |
(Printed forms for technical documents; printed form for parts lists) |
| DIN 6771-5-1977 |
技術資料的印制格式.A3規格的線路圖 |
(Printed forms for technical documents; circuit diagramm A3) |
| DIN 6773-2001 |
鋼鐵材料熱處理.熱處理件.圖樣畫法及標注. |
(Heat treatment of ferrous metals - Heat treated parts, presentation and indications on drawings) |
| DIN 6774-4-1982 |
技術制圖.制圖規則.備印的有標記的試樣 |
(Technical drawings; Rules for preparation; Drawn masters for printing purposes) |
| DIN 6774-5-1985 |
技術制圖.制圖規則.工作投影儀用的繪圖原稿 |
(Technical drawings; principles of execution; principles for the preparation of drawings for working transparencies) |
| DIN 6779 Bb.1-1997 |
技術產品和技術產品文件的標識結構系統.國際規范和國內規范的相互關系 |
(Structuring principles for technical products and technical product documentation - Relationship between international and national standards) |
| DIN 6779-10 Bb.1-2000 |
技術產品和技術產品文獻用結構原則.第10部分:動力工廠.用在標志塊上的例子 |
(Structuring principles for technical products and technical product documentation - Part 10: Power plants; examples for use on designation blocks) |
| DIN 6779-10 Bb.2-2000 |
技術產品和技術產品文獻用結構原則.第10部分:動力工廠.KKS和DIN6779-10的比較 |
(Structuring principles for technical products and technical product documentation - Part 10: Power plants; comparison of KKS and DIN 6779-10) |
| DIN 6779-10-2000 |
技術產品和技術產品文獻用結構原則.第10部分:動力工廠 |
(Structuring principles for technical products and technical product documentation - Part 10: Power plants) |
| DIN 6779-11-1998 |
技術產品和技術產品文獻用標識分類系統.第11部分:要求和檢驗 |
(Structuring principles for technical products and technical product documentation - Part 11: Ships and marine technology) |
| DIN 6779-12-2003 |
技術產品和技術產品文獻用標識分類系統.第12部分:建筑物和建筑技術 |
(Structuring principles for technical products and technical product documentation - Part 12: Buildings and building technology) |
| DIN 6779-13-2003 |
技術產品和技術產品文獻用標識分類規則.第13部分:化學工廠 |
(Structuring principles for technical products and technical product documentation - Part 13: Chemical plants) |
| DIN 6779-2-2004 |
技術產品和技術產品文獻的組構原則.第2部分:字母編碼.根據對象的目的和任務分類的主類和下位類 |
|
| DIN 678-1-1998 |
信封.規格 |
(Envelopes - Part 1: Sizes) |
| DIN 678-2-1994 |
信封.在裝信機中處理的信封.尺寸C6至C4 |
(Envelopes - Part 2: Banker shape envelopes for use in inserting machines, size C6 to C4) |
| DIN 6780-2000 |
技術繪圖.孔的簡化表示和尺寸 |
(Technical drawings - Simplified representation and dimensioning of holes) |
| DIN 6785-1991 |
車削零件用頂尖.制圖說明 |
(Manufacturing spigots (Butzen) of parts produced by lathes; indications on drawings) |
| DIN 6789-1-1990 |
文件分類管理系統.生產技術文件結構 |
(Systematic arrangement of documents; arrangement of technical product documentation) |
| DIN 6789-100-2001 |
文件分類管理系統.第100部分:CALS基本慣例 |
(Systematic arrangement of documents - Part 100: Basic conventions for CALS) |
| DIN 6789-2-1990 |
文件分類管理系統.成套生產技術文件 |
(Systematic arrangement of documents; sets of documents of technical product documentation) |
| DIN 6789-3-1990 |
文件分類管理系統.文獻和題錄的變動.一般要求 |
(Systematic arrangement of documents; revisions of documents and items; general requirements) |
| DIN 6789-4-1995 |
文件分類管理系統.第4部分:技術產品文獻按內容分類 |
(Systematic arrangement of documents - Part 4: Structure of contents of technical product documentation) |
| DIN 6789-5-1995 |
文件分類管理系統.第5部分:技術產品文獻的發布 |
(Systematic arrangement of documents - Part 5: Release of technical product documentation) |
| DIN 6789-6-1998 |
文件分類管理系統.第6部分:數字技術文件的防偽性 |
(Systematic arrangement of documents - Part 6: Protection against falsification of digital technical documentation) |
| DIN 6789-7-2005 |
文獻的分類管理.第7部分:數字產品數據發布過程的質量標準 |
|
| DIN 6790-1 Bb.1-1986 |
技術圖紙上的說明文字.英.法.意大利文專用術語 |
(Specification by terms in technical drawings; terms in english, french and italien) |
| DIN 6790-1-1980 |
技術圖紙上的說明文字.專用語 |
(Specification by terms in technical drawings; terms) |
| DIN 6790-2-1985 |
技術圖紙上的評議語言文字.句結構用詞說明 |
(Wording used in technical drawings; sentence structure) |
| DIN 6791-1993 |
平頭半空心鉚釘.公稱直徑1,6至10mm |
(Semi-tubular pan head rivets; nominal diameters 1,6 to 10 mm) |
| DIN 6792-1993 |
沉頭半空心鉚釘.公稱直徑1,6至10mm |
(Semi-tubular countersunk head rivets; nominal diameters 1,6 to 10 mm) |
| DIN 6796-1987 |
螺釘連接用彈簧墊圈 |
(Conical spring washers for bolt/nut assemblies) |
| DIN 6799-1981 |
軸的鎖緊墊圈 |
(Lock washers (retaining washers) for shafts) |
| DIN 680-1995 |
開窗信封.規格和開窗位置 |
(Window envelopes - Sizes and position of the window) |
| DIN 6800-1-1980 |
放射技術中的劑量測量方法；用探測法測定光子和電子輻射的劑量一般原理 |
(Procedures in dosimetry; principles of photon and electron dosimetry with probe-type detectors) |
| DIN 6800-2-1997 |
光子輻射和電子輻射用按特殊方法作的劑量測定工藝.第2部分:電離劑量測定 |
(Procedures of dosimetry with probe-type detectors for photon and electron radiation - Part 2: Ionisation dosimetry) |
| DIN 6800-4-2000 |
光子輻射和電子輻射用帶探針型探測器的劑量測定工藝.第4部分:膠片劑量測定 |
(Procedures of dosimetry with probe-type detectors for photon and electron radiation - Part 4: Film dosimetry) |
| DIN 6800-5-1980 |
放射技術中的劑量測量方法；熱致發光劑量測定 |
(Procedures in dosimetry; thermoluminescence dosimetry) |
| DIN 6802-1-1991 |
中子劑量學.專業術語和名稱 |
(Neutron dosimetry; special terms and definitions) |
| DIN 6802-2-1999 |
中子劑量學.第2部分:輻射防護設備用從中子流量和校正系數中計算環境和人員劑量等效值的轉換系數 |
(Neutron dosimetry - Part 2: Conversion coefficients for the calculation of ambient and personal dose equivalent from the neutron fluence, and correction factors for radiation protection devices) |
| DIN 6802-3-1988 |
中子劑量學.中子劑量測定法和射線防護用中子測量?jī)x.標記特性 |
(Neutron dosimetry; methods and devices for neutron measurement in radiation protection; ratings) |
| DIN 6802-4-1998 |
中子劑量學.用反射率劑量?jī)x的個人劑量的測量技術 |
(Neutron dosimetry - Part 4: Measurement technique for individual dosimetry using albedo dosimeters) |
| DIN 6804-1-1993 |
醫用密封放射源搬動中的放射性防護規則.治療應用 |
(Radiation protection rules for handling of sealed radioactive sources in medicine; therapeutical application) |
| DIN 6809-1-1976 |
臨床劑量測定；聚束性Ｘ.γ和電子射線的治療應用 |
(Clinical dosimetry; therapeutical application of x-ray, gamma-ray and electron beams) |
| DIN 6809-2-1993 |
臨床劑量測定.密封γ放射源的短期治療 |
(Clinical dosimetry; Brachytherapy with sealed gamma sources) |
| DIN 6809-3-1990 |
臨床劑量測定.X線診斷 |
(Clinical dosimetry; diagnostic radiology) |
| DIN 6809-4-1988 |
臨床劑量.測定在放射療法和軟組織斷中峰值電壓10至100KVX射線的應用 |
(Clinical dosimetry; applications of X-rays with peak voltages between 10 and 100 kV in radiotheraphy and soft tissue diagnostics) |
| DIN 6809-5-1996 |
臨床劑量.放射療法中電子管電壓為100至400KV的X光射線的應用 |
(Clinical dosimetry - Part 5: Application of X-rays with peak voltages between 100 and 400 kV in radiotherapy) |
| DIN 6809-6-2004 |
臨床劑量測定.第6部分:高能光子與電子在經皮放射療法中的應用 |
(Clinical dosimetry - Part 6: Application of high energy photon and electron radiation in percutaneous radiotherapy) |
| DIN 6809-6-2004 |
臨床劑量測定.第6部分:高能光子與電子在經皮放射療法中的應用 |
|
| DIN 6809-7-2003 |
臨床劑量測定.第7部分:對患者使用X射線診斷劑量的測定 |
(Clinical dosimetry - Part 7: Method for determination of patient dose in X-ray diagnostics) |
| DIN 68100 Bb.1-1978 |
木材處理和加工的長度和角度尺寸的公差.受濕度影響引起硬木沿紋理的平行方向的尺寸變化.引起云杉.冷杉.落葉 |
(Tolerances for linear measure and angular dimensions in the wood-working and wood-processing industry; change of dimensions due to the influence of moisture parallel to the grain of solid wood, radial and tangential to the grain of spruce, fir, larch, pi |
| DIN 68100 Bb.2-1978 |
木材處理和加工的長度和角度尺雨的公差.受濕度影響引起橡樹.柃松.山毛櫸等沿紋理的經向和切向的尺寸變化 |
(Tolerances for linear measure and angular dimensions in the wood-working and wood-processing industry; change of dimensions due to the influence of moisture radial and tangential to the grain of afrormosia, afzelia, ekki, beech, oak, ash, iroko, khaya (a |
| DIN 68100 Bb.3-1978 |
木材處理和加工的長度和角度尺寸的公差.受濕度影響引起白楊等沿紋理的徑向和切向的尺雨變化 |
(Tolerances for linear measure and angular dimensions in the wood-working and wood-processing industry; change of dimensions due to the influence of moisture, radial and tangential to the grain of red-meranti, muhuhu, niangon, walnut, aspen (poplar), util |
| DIN 68100 Bb.4-1978 |
木材處理和加工的長度和角度尺寸的公差；受濕度影響木屑板（Ｖ２０.Ｖ１００.Ｖ１００Ｇ）.膠合板和硬木纖 |
(Tolerances for linear measure and angular dimensions in the wood-working and wood-processing industry; change of dimensions due to the influence of moisture in the direction of thickness, width and length of particle-board, plywood and fibreboard) |
| DIN 68100-1984 |
木材處理和加工的公差系統.概念.公差系統.收縮尺寸和膨脹尺寸 |
(Tolerance system for wood working and wood processing; concepts, series of tolerances, shrinkage and swelling) |
| DIN 68101-1984 |
木材處理和加工的基本尺寸和公差范圍 |
(Fundamental deviations and tolerance zones for wood working and wood processing) |
| DIN 68119-1996 |
蓋層頂?shù)谋∧景?/td>
| (Wood shingles) |
| DIN 6812 Berichtigung 1-2003 |
對DIN6812:2002-06的技術勘誤 |
(Corrigenda to DIN 6812:2002-06) |
| DIN 6812 Berichtigung 2-2004 |
DIN6812-2002的勘誤 |
(Corrigenda to DIN 6812:2002-06) |
| DIN 6812 Berichtigung 2-2004 |
DIN 6812-2002的勘誤 |
|
| DIN 6812-2002 |
300KV以下醫用Ｘ射線設備.安裝的輻射防護規則 |
(Medical X-ray equipment up to 300 kV - Radiation protection rules for installation) |
| DIN 68120-1968 |
木型材.基本形狀 |
(Timber profiles; basic forms) |
| DIN 68121-1-1993 |
窗和窗門用木質型材.尺寸.質量要求 |
(Timber profiles for windows and window doors; dimensions, quality requirements) |
| DIN 68121-2-1990 |
窗和窗門用木型材.一般原理 |
(Timber profiles for windows and window doors; general technical details) |
| DIN 68122-1977 |
針葉類木纖維板 |
(Chamfered boards tongued and grooved made of coniferous timber) |
| DIN 68123-1977 |
針葉類木屋面板 |
(Weatherboards made of coniferous timber) |
| DIN 68125-1-1970 |
歐洲(北歐除外)木材制踏腳板 |
(Skirting boards made of European timber (except northern timber)) |
| DIN 68125-2-1977 |
北歐針葉木材制踏腳板 |
(Skirting boards made of northern coniferous timber) |
| DIN 68126-1-1983 |
帶暗槽的成型板.尺寸 |
(Profile boards with chamfer and broad root; dimensions) |
| DIN 68126-3-1986 |
倒棱寬基異型薄木板.美國鵝掌楸和歐洲赤松的分級 |
(Profile boards with chamfer and broad root; grading for white-wood and redwood) |
| DIN 68127-1970 |
隔音板 |
(Acoustic boards) |
| DIN 68128-1977 |
樓板 |
(Balcony boards) |
| DIN 6814-1-1980 |
放射技術中的概念與名稱；應用范圍 |
(Terms and definitions in the field of radiological technique; regions of application) |
| DIN 6814-1-2005 |
放射技術領域中的術語.第1部分:應用范圍 |
|
| DIN 6814-10-1992 |
放射技術的概念和名稱.含有放射性核素的閃爍掃描術 |
(Terms and definitions in the field of radiological technique; scintigraphy of incorporated radioisotopes) |
| DIN 6814-13-1990 |
放射技術中的概念與名稱；核醫療測量設備用準直儀與屏蔽 |
(Terms and definitions in the field of radiological technique; collimators and shieldings for measuring instruments in nuclear medicine) |
| DIN 6814-14-1981 |
放射技術中的概念與名稱；成像系統 |
(Terms and definitions in the field of radiological technique; imaging systems) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com