標準號 |
中文名稱 |
英文名稱 |
| DIN 25001-2-1989 |
有軌機動車部件的名稱.一般部件的名稱和概念說明 |
(Terms for railway vehicle parts; terms and definitions of general parts) |
| DIN 25001-3-1976 |
有軌機動車部件的名稱.帶彈性體的彈性部件的名稱和概念說明 |
(Terms for railway vehicle parts; terms and definitions for resilient parts with elastomers) |
| DIN 25001-4-1973 |
有軌機動車部件的名稱.萬向軸.鉤子.關節的名稱和概念說明 |
(Terms for railway vehicle parts; terms and definitions for cardan shafts, cardan joint carriers and cardan joints) |
| DIN 25001-5-1981 |
有軌機動車部件的名稱.液壓和機械功率傳送的傳動齒動箱的名稱及概念說明 |
(Terms for railway vehicle parts; terms and definitions for drives of the hydraulic and mechanical transmission) |
| DIN 25001-6-1977 |
有軌機動車部件的名稱.內燃機驅動裝置的冷卻設施的名稱和概念說明 |
(Terms for railway vehicle parts; terms and definitions for cooling systems of internal, combustion drives) |
| DIN 25002-1-2003 |
鐵路設施.軌道車名稱與符號體系.第1部分:總則 |
(Railway applications - Designation systematic for rail vehicles - Part 1: General) |
| DIN 25002-2-2001 |
鐵路應用.鐵路車輛分類系統.第2部分:產品組 |
(Railway applications - Classification system for rail vehicles - Part 2: Product groups) |
| DIN 25002-3-2001 |
鐵路應用.鐵路車輛的標識系統.第3部分:文件的分類 |
(Railway applications - Designation systematic for rail vehicles - Part 3: Classification of documents) |
| DIN 25002-4-2001 |
鐵路應用.鐵路車輛的標識系統.第4部分:安裝位點的標識 |
(Railway applications - Designation systematic for rail vehicles - Part 4: Designation of installation sites and locations) |
| DIN 25003-2001 |
鐵路應用.道路車輛的分類.概況,術語和定義 |
(Railway applications - Classification of rail vehicles - Survey, terminology, definitions) |
| DIN 25005-1998 |
有軌機動車輛.圖示規則.行駛方向,件標識 |
(Railway vehicles - Rules for representation - Direction of traffic, designation of components) |
| DIN 25005-2005 |
鐵路車輛.圖示規則.取向方向和部件標識 |
|
| DIN 25007 Bb.1-1990 |
有軌機動車輛.公式符號.單位.縮寫符號.概覽.名詞術語和公式符號索引 |
(Rail vehicles; formula signs, units, abreviation, survey; index and formula index) |
| DIN 25007-1990 |
有軌機動車輛.公式符號.單位.縮寫符號.概覽 |
(Rail vehicles; formula signs, units, abbreviation; survey) |
| DIN 25008-2001 |
有軌機動車輛.測定車輛重量的原則.術語,定義,符號和閥門 |
(Railway vehicles - Principles for the determination of vehicle weights - Terms, definitions, symbols, values) |
| DIN 25008-2005 |
有軌車輛.測定車輛重量的原則.術語、定義、符號和數值 |
|
| DIN 25040-1-1988 |
雙輪對貨車.新結構的測量.測量依據 |
(Goods wagons equipped with two wheel sets; construction measuring; principles of measuring) |
| DIN 25040-2 Bb.1-1988 |
雙對輪貨車.新桔構的測量.底盤的測量方法.測量記錄表格 |
(Goods wagons equipped with two wheels sets; construction measuring; measuring methods for underframe data record-sheet) |
| DIN 25040-2-1988 |
雙輪對貨車.新結構的測量.底盤的測量過程 |
(Goods wagons equipped with two wheel sets; construction measuring; measuring methods for underframe) |
| DIN 25040-3 Bb.1-1988 |
雙對輪貨車.新桔構的測量.行動部份的測量方法.測量記錄表格 |
(Goods wagons equipped with two wheels sets; construction measuring; measuring methods for set of carrying wheels data record-sheet) |
| DIN 25040-3 Bb.2-1985 |
雙輪對貨車.新結構的測量.行走機構的測量方法.測量步驟實例1 |
(Goods wagons equipped with two wheel sets; construction measuring; measuring methods for set of carrying wheels; example of the measuring procedure 1) |
| DIN 25040-3 Bb.3-1985 |
雙輪對貨車.新結構的測量.傳動裝置的測量過程.測量過程14的示例 |
(Goods wagons equipped with two wheel sets; construction measuring; measuring methods for set of carrying wheels; example of the measuring procedure 14) |
| DIN 25040-3-1988 |
雙輪對貨車.新結構的測量.傳動裝置的測量過程 |
(Goods wagons equipped with two wheel sets; construction measuring; measuring methods for set of carrying wheels) |
| DIN 25041-1-1988 |
雙輪對貨車.新結構的測量.測量依據 |
(Goods wagons with bogies; constructional measuring; principles of measuring) |
| DIN 25041-2 Bb.1-1988 |
帶轉向架的貨車.新結構的測量.底盤的測量方法.測量記錄表格 |
(Goods wagons with bogies; constructional measuring; measuring methods for underframe data record-sheet) |
| DIN 25041-2-1988 |
帶轉向架的貨車.新結構的測量.底盤的測量過程 |
(Goods wagons with bogies; constructional measuring; measuring methods for underframe) |
| DIN 25041-4 Bb.1-1988 |
帶轉向架的貨車.新結構的測量.帶雙輪對的轉向架的測量過程.測量表的格式 |
(Goods wagons with bogies; constructional measuring; measuring methods for bogies with two self-adjustable wheel sets data record-sheet) |
| DIN 25041-4-1988 |
帶轉向架的貨車.新結構的測量.帶雙轉向輪對的轉向架的測量過程 |
(Goods wagons with bogies; contructional measuring; measuring methods for bogies with two self-adjustable wheel sets) |
| DIN 25041-5 Bb.1-1988 |
帶轉向架的貨車.新結構的測量.帶三輪對轉向架的測量方法.測量記錄表格 |
(Goods wagons with bogies; constructional measuring; measuring of bogies with three wheel sets; data record-sheet) |
| DIN 25041-5-1988 |
帶轉向架的貨車.帶三個輪對的轉向架的測量過程 |
(Goods wagons with bogies; constructional measuring; measuring of bogies with three wheel sets) |
| DIN 25043-1-1992 |
客車和機動車輛.新結構的測量.測量基礎 |
(Passenger coaches and railcars; constructional measuring; principles of measuring) |
| DIN 25043-2 Bb.1-1992 |
客車和機動車輛.新結構的測量.測量程序.測量活頁表格 |
(Passenger coaches and railcars; constructional measuring; measuring methods; data record-sheet) |
| DIN 25043-2-1992 |
客車和機動車輛.新結構的測量.測量程序 |
(Passenger coaches and railcars; constructional measuring; measuring methods) |
| DIN 25044-1986 |
有軌機動車的測量基準符號 |
(Reference markers for measuring rail-borne vehicles) |
| DIN 25045 Bb.1-1998 |
鐵路車輛.旅客列車車身上行走機構的靜負荷測量和計算.測量表格式 |
(Railway vehicles - Measurement and calculation of static loads on running gears from passenger coach vehicle bodies) |
| DIN 25045-1998 |
鐵路車輛.旅客列車車身上行走機構的靜負荷測量和計算 |
(Railway vehicles - Measurement and calculation of static loads on running gears from passenger coach vehicle bodies) |
| DIN 25070-1988 |
有軌車輛用門.木結構車內轉門.主要尺寸和連接尺寸 |
(Doors for rail vehicles; hinged internal wooden doors; principal and assembly dimensions) |
| DIN 25071-1984 |
有軌機動車輛用門.按鍵 |
(Doors for rail vehicles; door handles) |
| DIN 25072-1985 |
有軌機動車輛用門.止動板 |
(Doors for rail vehicles; edge plates) |
| DIN 25073-1988 |
有軌機動車輛用門.鎖側閉合邊條 |
(Doors for rail vehicles; edge strips around the lock plare and striking plate) |
| DIN 25074-1988 |
有軌機動車輛用門.門鉸鏈 |
(Doors for rail vehicles; door hanger) |
| DIN 25075-1988 |
有軌機動車輛用門.門框.主要尺寸和連接尺寸 |
(Doors for rail vehicles; door frames, principal dimensions and fitting dimensions) |
| DIN 25076-1987 |
有軌機動車輛用門.車內旋轉門鎖 |
(Doors for rail vehicles; locks for inner hinged doors) |
| DIN 25077-1986 |
有軌機動車輛用門.車內旋轉門鎖.鎖箱 |
(Doors for rail vehicles door; lock cases) |
| DIN 25078-1986 |
有軌機動車輛用門.車內旋轉門鎖.按紐銘牌 |
(Doors for rail vehicles; lock plates) |
| DIN 25079-1986 |
有軌機動車輛用門.車內旋轉門鎖.旋紐 |
(Doors for rail vehicles; locking handles) |
| DIN 25080-1986 |
有軌機動車輛用門.車內旋轉門鎖..栓鎖外殼 |
(Doors for rail vehicles; casing for locking mechanism) |
| DIN 2509-1986 |
螺栓 |
(Double end studs) |
| DIN 2510-1 Bb.-1974 |
膨脹螺栓連接.一覽表.應用范圍和安裝示例.螺栓連接的計算 |
(Bolted connections with reduced shank, survey and installation; studies relating to the calculation of bolted connections) |
| DIN 2510-1-1974 |
膨脹螺栓連接.一覽表.應用范圍和安裝示例 |
(Bolted Connections with Reduced Shank; Survey, Range of Application and Examples of Installation) |
| DIN 2510-2-1971 |
膨脹的螺栓連接.帶大間隙的米制螺紋.公稱尺寸和極限尺寸 |
(Bolted Connections with Reduced Shank; Metric Thread with Large Clearence, Nominal Dimensions and Limits) |
| DIN 2510-3-1971 |
膨脹螺栓連接.全螺紋螺柱 |
(Bolted Connections with Reduced Shank; Stud-bolts) |
| DIN 2510-4-1971 |
膨脹螺栓連接.雙頭螺栓 |
(Bolted Connections with Reduced Shank; Studs) |
| DIN 2510-5-1971 |
膨脹螺栓連接.六角螺母 |
(Bolted Connections with Reduced Shank; Hexagon Nuts) |
| DIN 2510-6-1974 |
膨脹螺栓連接.蓋螺帽 |
(Bolted Connections with Reduced Shank; Cap Nuts) |
| DIN 2510-7-1971 |
膨脹螺栓連接.套管 |
(Bolted Connections with Reduced Shank; Extension Sleeves) |
| DIN 2510-8-1971 |
膨脹螺栓連接；雙頭螺栓的旋入孔 |
(Bolted Connections with Reduced Shank; Threaded Holes for Studs) |
| DIN 25100-1983 |
近郊的有軌車輛.車輛的橫截面.包括集電器部分的外形尺寸 |
(Rail vehicles for short-distance traffic; vehicle cross-sections; external dimensions with pantograph) |
| DIN 25101-1-1983 |
近郊的有軌車輛.車輛尺寸及A型座位排列 |
(Rail vehicles for short-distance traffic; vehicle dimensions and seat arrangement; form A) |
| DIN 25101-3-1983 |
近郊的有軌車輛.車輛尺寸及C型座位排列 |
(Rail vehicles for short-distance traffic; vehicle dimensions and seat arrangement; form C) |
| DIN 25104-1983 |
近郊的有軌車輛.行李架 |
(Suburban railway vehicles; luggage racks) |
| DIN 25105-1983 |
近郊的有軌車輛.座位.主要尺寸 |
(Suburban railway vehicles; seats, dimensions) |
| DIN 25106-1-1974 |
夾緊件.一覽表 |
(Clamping fittings; summary) |
| DIN 25106-10-1974 |
夾緊件.手柄架 |
(Clamping fittings; handle supports) |
| DIN 25106-11-1974 |
夾緊件.卵形端支承 |
(Clamping fittings; end-support, oval) |
| DIN 25106-12-1974 |
夾緊件.帶槽端支承 |
(Clamping fittings; end-supports, slotted) |
| DIN 25106-13-1974 |
夾緊件.彈性端支承 |
(Clamping fittings; end-support, elastic) |
| DIN 25106-14-1974 |
夾緊件.帶檢查孔支承 |
(Clamping fittings; entrance-support) |
| DIN 25106-15-1974 |
夾緊件.彈性螺旋支承 |
(Clamping fittings; screwed supports, elastic) |
| DIN 25106-16-1974 |
夾緊件.短隔片夾 |
(Clamping fittings; holder of spacer, short) |
| DIN 25106-17-1974 |
夾緊件.長隔片夾 |
(Clamping fittings; holder of spacer, long) |
| DIN 25106-18-1974 |
夾緊件.插座 |
(Clamping fittings; rosettes) |
| DIN 25106-2-1974 |
夾緊件.支撐管與防護管 |
(Clamping fittings; supporting and protecting tubes) |
| DIN 25106-3-1974 |
夾緊件.套筒螺母 |
(Clamping fittings; sleeve nuts) |
| DIN 25106-4-1974 |
夾緊件.十字管接頭 |
(Clamping fittings; cross-pieces) |
| DIN 25106-5-1974 |
夾緊件.T形管接頭 |
(Clamping fittings; tee-pieces) |
| DIN 25106-6-1974 |
夾緊件.彈性T形管接頭 |
(Clamping fittings; tee-piece, elastic) |
| DIN 25106-7-1974 |
夾緊件.彎接頭 |
(Clamping fittings; elbows) |
| DIN 25106-8-1974 |
夾緊件.終端支架 |
(Clamping fittings; end-supports) |
| DIN 25106-9-1974 |
夾緊件.中心支架 |
(Clamping fittings; centre supports) |
| DIN 25108-1978 |
短途鐵路車輛.電磁軌道閘的連接尺寸和安裝尺寸 |
(Suburban railways; interface and outline dimensions for magnetic track brakes) |
| DIN 25109-1-1990 |
短路鐵路車輛.外置輪對的輪對軸承.一覽表及用柱滾子軸承配置 |
(Suburban railway vehicles; axle boxes for wheel sets with supports at the outer ends; general view and arrangement for cylindrical roller-bearings) |
| DIN 25109-2-1991 |
短途鐵路車輛.端部支承輪對用輪對軸承.圓柱滾子軸承用零部件 |
(Suburban railway vehicles; axle boxes for wheel sets with supports at the outer ends; components for cylindrical roller-bearings) |
| DIN 25110-1980 |
短途鐵路車輛.輪對的軸制動圓盤 |
(Suburban railway vehicles; axle mounted brake disc fitted for wheel set) |
| DIN 25112-1-1980 |
短途鐵路車輛.輪箍截面.寬95和110mm |
(Suburban railway vehicles; profiles for wheel flange of tyres, width 95 and 110 mm) |
| DIN 25112-2-1983 |
短途鐵路車輛.輪箍截面.截面B.寬95和115mm |
(Suburban railway vehicles; profiles for wheel flange of tyres; profile B, width 95 and 115 mm) |
| DIN 25112-3-1983 |
短途鐵路車輛.輪箍截面.截面C.寬135mm |
(Suburban railway vehicles; profiles for wheel flange of tyres; profile C, width 135 mm) |
| DIN 2512-1999 |
法蘭.壓力PN160的榫和槽.設計尺寸.壓力PN10至PN160的嵌入環 |
(Flanges - Tongue and Groove, PN 160 - Design sizes; rings PN 10 to PN 160) |
| DIN 25150-1990 |
鐵路車輛.車廂內部.車輛清潔的設計要求 |
(Rail vehicles; interior; design requirements for cleaning) |
| DIN 25192-1978 |
鐵路車輛用T形頭螺釘 |
(T-head bolts (hammer head bolts) for railway vehicles) |
| DIN 25193-2003 |
鐵路車輛.帶ISO米制螺紋的菌頭地腳螺栓.C級 |
(Railway vehicles - Mushroom head anchor screws with metric ISO thread - Class C) |
| DIN 25195-2003 |
鐵路車輛.帶ISO米制螺紋的雙接口沉頭螺栓.C級 |
(Railway vehicles - Countersunk bolts with double nip with metric ISO thread - Class C) |
| DIN 25200-1997 |
鐵路車輛用螺釘和螺母.一覽表 |
(Screws, bolts and nuts for rail vehicles - Summary) |
| DIN 25201-1-2004 |
鐵路車輛及其組件的設計指南.螺栓連接.第1部分:螺栓連接的分類 |
|
| DIN 25201-1986 |
鐵路車輛用螺栓連接的鎖緊.概述 |
(Railway vehicles; retention of bolted assemblies; in general) |
| DIN 25201-3-2004 |
鐵路車輛及其組件的設計指南.螺栓連接.第3部分:設計.電氣應用 |
|
| DIN 25201-4-2004 |
鐵路車輛及其組件的設計指南.螺栓連接.第4部分:螺栓連接的安全 |
|
| DIN 25201-5-2005 |
鐵路車輛及其組件的設計指南.螺栓連接.第5部分:防腐蝕 |
|
| DIN 25201-6-2005 |
鐵路車輛及其組件的設計指南.螺栓連接.第6部分:連接尺寸 |
|
| DIN 25201-7-2004 |
鐵路車輛及其組件的設計指南.螺栓連接.第7部分:安裝 |
|
| DIN 25202-1992 |
鐵路車輛.螺栓連接件的鎖緊.預應力和緊固扭矩 |
(Railway vehicles; securing of bolted joints; initial stressing forces and tightening torques) |
| DIN 25203-1992 |
鐵路車輛.用粘接劑鎖定的螺紋連接件 |
(Railway vehicles; securing of bolted joints by adhesives) |
| DIN 25250-2000 |
鐵路車輛.貨車.主要尺寸和型號 |
(Railway vehicles - Wagons - Main dimensions, types) |
| DIN 25252-1987 |
鐵路車輛.帶側壁活門的自卸車.鎖環軸的方頭 |
(Rail vehicles; self-discharging wagon with side-wall flaps; square for locking shaft) |
| DIN 25255-1997 |
軌道車輛.馬鞍形底傾卸車用四方扳手.尺寸 |
(Rail vehicles - Spanner wrench - Dimensions) |
| DIN 25256-1997 |
軌道車輛.馬鞍形底傾卸車用鎖定裝置.尺寸 |
(Rail vehicles - Locking device - Dimensions) |
| DIN 2528-1991 |
法蘭.鋼法蘭成品.材料 |
(Flanges; steel flanges ready for use; materials) |
| DIN 254-2003 |
產品幾何量技術規范(GPS).圓錐體和錐體角度系列.設定錐體角度和高度的值 |
(Geometrical product specifications (GPS) - Series of conical tapers and taper angles; Values for setting taper angles and setting heights) |
| DIN 25400-1991 |
電離輻射的報警符號 |
(Basic symbol for ionizing radiation) |
| DIN 25401-1-2002 |
核技術的術語和定義.第1部分:物理及化學基本原理 |
(Terms and definitions of nuclear technology - Part 1: Basic notions of physics and chemistry) |
| DIN 25401-2-2002 |
核技術的術語和定義.第2部分:反應堆設計 |
(Terms and definitions of nuclear technology - Part 2: Reactor design) |
| DIN 25401-4-2002 |
核技術的術語和定義.第4部分:保障監督 |
(Terms and definitions of nuclear technology - Part 4: Safeguards) |
| DIN 25401-5-2002 |
核技術的術語和定義.第5部分:核燃料技術 |
(Terms and definitions of nuclear technology - Part 5: Nuclear fuel technology) |
| DIN 25401-7-2002 |
核技術的術語和定義.第7部分:核設施的安全 |
(Terms and definitions of nuclear technology - Part 7: Safety of nuclear installations) |
| DIN 25401-8-2002 |
核技術的術語和定義.第8部分:輻射 |
(Terms and definitions of nuclear technology - Part 8: Radiation) |
| DIN 25401-9-2002 |
核技術的術語和定義.第9部分:放射性廢物管理 |
(Terms and definitions of nuclear technology - Part 9: Radioactive waste management) |
| DIN 25403 Bb.1-1997 |
核燃料處理和搬運情況下的臨界安全.說明 |
(Criticality safety in processing and handling fissile materials - Comments) |
| DIN 25403-1-1991 |
加工和搬運核燃料時的臨界安全性.基本原則 |
(Criticality safety in processing and handling of fissile materials; principles) |
| DIN 25403-2-1995 |
加工和搬運核燃料時的臨界安全性.第2部分:鈾235-金屬-輕水-混合物的臨界數據 |
(Criticality safety in processing and handling fissile materials - Part 2: Criticality data for uranium 235 metal light-water mixtures) |
| DIN 25403-3-2000 |
處理和搬運核燃料時的臨界安全性.第3部分:钚239金屬-輕水混合物的臨界數據 |
(Criticality safety in processing and handling fissile materials - Part 3: Criticality data for plutonium 239 metal light-water-mixtures) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com