標準號 |
中文名稱 |
英文名稱 |
| DIN 16521-1999 |
印刷技術.排版中的圖線.尺寸 |
(Printing technology - Rules in typesetting - Measures) |
| DIN 16524-1-1994 |
版畫業的印刷和印刷油墨的檢驗.抗各種物理影響和化學影響的性能.耐水性.對溶劑的不退色性 |
(Testing of prints and inks for graphic technology - Resistance to various physical and chemical influences - Part 1: Resistance to water and solvents) |
| DIN 16524-2-1965 |
版畫業的印刷和印刷油墨的檢驗.抗各種物理影響和化學影響的性能.對堿的不褪色性.對皂洗的不褪色性.對洗滌劑 |
(Testing of prints and inks for printing trade; resistance to various physical and chemical influences, resistance to alkali, soap and washing materials (detergents)) |
| DIN 16524-3-1965 |
版畫業的印刷和印刷油墨的檢驗.抗各種物理影響和化學影響的性能.對乳酪食用脂肪、石蠟、蠟及香料的不退色性 |
(Testing of prints and printing inks for printing trade; resistance to various physical and chamical influences, resistance to cheese, fats, paraffin and wax, spices) |
| DIN 16524-5-1998 |
版畫業的印刷和印刷油墨的檢驗.抗各種物理影響和化學影響的性能.第5部分:壓熱器抗消毒性能 |
(Testing of prints and printing inks in graphic technology - Resistance to various physical and chemical influences - Part 5: Resistance to sterilization with autoclave) |
| DIN 16524-6-2000 |
圖形技術用印刷和印刷油墨的檢驗.抗各種物理影響和化學影響.第6部分:暴露于熱堿溶液的飲料瓶標簽抗?jié)B透和剝 |
(Testing of prints and inks for graphic technology - Resistance to various physical and chemical influences - Part 6: Behaviour of labels for beverage bottles on exposure to hot alkaline solution, resistance to penetration and come-off time) |
| DIN 16524-7-2001 |
圖形技術用印刷和印刷油墨的檢驗.抗各種物理影響和化學影響.第7部分:暴露于熱堿溶液的飲料瓶標簽?zāi)蛪A性溶液 |
(Testing of prints and inks for graphic technology - Resistance to various physical and chemical influences - Part 7: Behaviour of labels for beverage bottles on exposure to hot alkaline solution, resistance to alkaline solution) |
| DIN 16525-1965 |
版畫業用印刷和印刷油墨的檢驗.抗各種物理影響和化學影響的性能.耐光性 |
(Testing of prints and inks for printing trade; resistance to various physical and chemical influences, resistance to light (light fastness)) |
| DIN 16526-1994 |
版畫業用印刷油墨.標簽上凸版平版印刷用油墨性能的符號 |
(Printing inks for graphic technology - Marking of properties of inks for letterpress printing and planographic printing on labels) |
| DIN 16527-1-1993 |
印刷技術.校驗范圍.校驗圖片.校驗標識.基本概念 |
(Printing technology; control patch, control image, control mark; terms) |
| DIN 16527-3-1993 |
印刷技術.校檢范圍.印刷應用 |
(Printing technology; test areas; application for printing) |
| DIN 16528-1988 |
印刷技術.凹版印刷概念 |
(Printing technology; terms for gravure printing) |
| DIN 16529-1982 |
印刷技術.平板印刷的術語及定義 |
(Printing technology; terms for planorgraphic printing) |
| DIN 1653-1979 |
商業通用的鋼絲表面特性.名稱及其縮寫符號 |
(Surface Condition of Commercial Steel Wires; Denominations and Abbreviations thereof) |
| DIN 16536-1-1997 |
印刷技術上印刷品和油墨的檢驗.印刷品上油墨濃度的測量.第1部分:術語.實施測量 |
(Testing of prints and printing inks in graphic technology - Colour density measurements on on-press or off-press prints - Part 1: Terms and execution of measurements) |
| DIN 16536-2-1995 |
印刷品和印刷油墨的檢驗.印刷品上油墨濃度測量.第2部分:對油墨密度測量計測量安排的要求 |
(Testing of prints and printing inks in graphic technology - Colour density measurements on on-press or off-press prints - Part 2: Instrument specifications for reflection densitometers and their calibration) |
| DIN 16537-1998 |
印刷工藝中印刷品和油墨的檢驗.印刷品中可視光澤數的測定 |
(Testing of prints and printing inks in graphic technology - Determination of the visual luster number) |
| DIN 16543-1963 |
復制技術用14級灰色標度 |
(Grey-scale for reproduction process) |
| DIN 16544-1988 |
印刷技術復制技術的概念 |
(Printing technology; terminology in reproduction technology) |
| DIN 16547-1983 |
彩色柵復制時的光柵板角度 |
(Screen angles for halftone-colour-work) |
| DIN 16549-1-1996 |
印刷技術.預印制.第1部分:圖形校對符號和補充說明 |
(Graphic technology - Prepress printing process - Part 1: Correction marks for images and additional marking) |
| DIN 16550-1-2002 |
辦公家具.寫字臺.第1部分:尺寸 |
(Office furniture - Tables for upright working position - Part 1: Dimensions) |
| DIN 16551-1996 |
信封.概念 |
(Envelopes - Concepts) |
| DIN 16552-1-2005 |
手畫線條.第1部分:一般線條 |
|
| DIN 16552-1977 |
手稿畫線 |
(Lines for handwriting) |
| DIN 16553-1985 |
印刷和復印技術.配合制度 |
(Printing technology and process photography; register system) |
| DIN 16555-2002 |
辦公場所.辦公樓中交流場所的空間.檢測要求 |
(Office work place - Space for communication work places in office buildings - Requirements, testing) |
| DIN 16557-3-1994 |
管理,經濟及運輸用電子數據交換.聯合國標準通訊格式說明 |
(Electronic data interchange for administration, commerce and transport (EDIFACT); general introduction for United Nations standard messages (UNSMs)) |
| DIN 16557-4-2002 |
行政管理、商業和運輸用電子數據交換(EDIFACT).使用文件類型定義的有可擴充置標語言的UN/EDIFACT的置標規則 |
(Electronic data interchange for administration, commerce and transport (EDIFACT) - Part 4: Rules for the markup of UN/EDIFACT interchanges with the eXtensible Markup Language (XML) using Document Type Definitions (DTD`s)) |
| DIN 16557-5-2002 |
管理、商務和運輸用電子數據交換(EDIFACT).第5部分:以電子商務實施導則為基礎的XML格式文件(XSD)的產生原則 |
(Electronic data interchange for administration, commerce and transport (EDIFACT) - Part 5: Rules for generation of XML scheme files (XSD) on the basis of EDI(FACT) implementation guidelines (ISO/TS 20625:2002)) |
| DIN 16560-1-1998 |
行政管理,商業和運輸用電子數據交換(EDIFACT).使用規則.第1部分:服務區段 |
(EDIFACT - Application rules - Part 1: Service segments) |
| DIN 16560-15-2003 |
行政管理、商業和運輸用電子數據交換(EDIFACT).實施指南.第15部分:用于給用戶傳遞完整和可靠性數據的AUTACK |
(EDIFACT - Implementation guide - Part 15: Use of the service message type AUTACK for conveying integrity and authenticity data of send user data) |
| DIN 16560-16-2003 |
行政管理、商業和運輸用電子數據交換.實施指南.第16部分:傳送安全密鑰和證書用服務文電形式KEYMAN的使用 |
(EDIFACT - Implementation guide - Part 16: Use of the service message type KEYMAN for conveying security keys and certificates) |
| DIN 16560-4-2000 |
行政管理,使用規則.第4部分:化學工業試驗報告.質量D.99A |
(EDIFACT - Application rules - Part 4: Test report of chemical industry; QUALITY D.99A) |
| DIN 16561-22-1998 |
工業和貿易.行政管理,商業和運輸用電子數據交換(EDIFACT).標準電文格式.第22部分:生產的基本數據(PRODATD.9 |
(Industry and trade - EDIFACT; standardized message type - Part 22: Product data message (PRODAT D.97B)) |
| DIN 16568-3-2002 |
電子數據交換商業運輸管理.標準電文類型.第3部分:以EDIFACT1.2和1.3版為基礎實現用的文法和專業報告電文(CO |
(EDIFACT - Standardized message type - Part 3: Syntax and service report message (CONTRL) for implementation based on versions 1, 2 and 3 of the EDIFACT syntax) |
| DIN 16600-1991 |
印刷技術.制板技術中透明材料上網格色調的表面覆蓋度 |
(Printing technology; dot area of half-stones on transparent material in the printing technology) |
| DIN 16604-1973 |
報紙；紙的尺寸.廣告欄型式.廣告欄寬度.廣告欄之間的間隔 |
(Newspapers; paper sizes, type area of advertisement, column width of advertisement, space between advertisement columns) |
| DIN 16609-1981 |
印刷技術.孔版印刷.術語 |
(Printing technology; porous printing; terms) |
| DIN 16610-1984 |
印刷技術.孔版印刷.絲網印刷的概念 |
(Printing technology; porous printing; concepts for screen printing) |
| DIN 16611-1990 |
印刷技術.絲網印刷用測量單位 |
(Printing technology; measures for screen printing) |
| DIN 16614-2004 |
印刷技術.四色印刷用特征數據.補充素 |
|
| DIN 16620-1-1994 |
印刷技術.膠印用印刷板.尺寸 |
(Printing technology - Printing plates for offset printing - Part 1: Dimensions) |
| DIN 16620-2-1991 |
印刷技術.間接平板印刷(膠印)用印刷板.制板.術語和測量技術相關的原理 |
(Printing technology; printing plates for offset printing; terminology and principles of measurement techniques) |
| DIN 16620-3-1993 |
印刷技術.間接平版印刷(膠版印刷)用印刷板.布置和印刷.概念 |
(Printing technology; printing plates for offset printing; make-ready and printing; terms) |
| DIN 16621-1991 |
印刷技術.間接平板印刷(膠印)滾筒橡皮.概念、要求、檢驗、標志 |
(Printing technology; blankets for offset printing; terms, specifications, testing, marking) |
| DIN 16716-1992 |
壓力鑄造模.噴鑄模和壓模鑄造模.鋼制導套 |
(Compression-, injection- and diecasting moulds; guide bushes of steel) |
| DIN 16729-1984 |
由乙烯和瀝青共聚物(ECB)制成的塑料屋頂片材和塑料密封片材.要求 |
(Ethylene copolymer bitumen (ECB) plastic roofing sheeting and plastic sealing sheeting; requirements) |
| DIN 16730-1986 |
增塑聚氯乙烯(PVC-P)塑料屋頂板與瀝青不相容.要求 |
(Plasticized polyvinyl chloride (PVC-P) roofing felt incompatible with bitumen; requirements) |
| DIN 16731-1986 |
聚異丁烯(PIB)制塑料天花板.一邊壓薄.要求 |
(Polyisobuthylene (PIB) roofing felt with backing; requirements) |
| DIN 16734-1986 |
有合成纖維增強劑的增塑聚氯乙烯(PVC-P)塑料屋頂板與瀝青不相容.要求 |
(Man-made fibre reinforced plasticized polyvinyl chloride (PVC-P) roofing felt incompatible with bitumen; requirements) |
| DIN 16735-1986 |
有非網狀玻璃纖維筋的增塑聚氯乙烯(PVC-P)塑料屋頂板與瀝青不相容.要求 |
(Plasticized polyvinyl chloride (PVC-P) roofing felt with non-woven roving inner layer; requirements) |
| DIN 16736-1986 |
聚氯乙烯制塑料房頂板和塑料密封板.一邊粘合.要求 |
(Chlorinated polyethylene (PE-C) roofing felt and waterproofing sheet without backing; requirements) |
| DIN 16737-1986 |
有織物襯層的聚氯乙烯(PE-C)的塑料屋頂板和密封板.要求 |
(Chlorinated polyethylene (PE-C) roofing felt and waterproofing sheet with woven fabric inner layer; requirements) |
| DIN 16740-1976 |
紡織玻璃纖維.電工用的機織玻璃纖維織物.交貨的技術條件 |
(Textile glass; textile glass fabrics for electrical purposes, technical delivery specifications) |
| DIN 16741-1976 |
紡織玻璃纖維.電工用有固定織邊的機織玻璃纖維織帶.交貨的技術條件 |
(Textile glass; tapes with edges consisting of textile glass fabrics for electrical purposes, technical delivery specifications) |
| DIN 16747-1981 |
塑料-模塑材料用的壓模和注塑模的模塑成型表面粗糙度 |
(Roughness of the moulding surfaces of compression moulds and injection moulds) |
| DIN 16749-1986 |
壓力工具及壓鑄工具.成型工具原件的尺寸公差 |
(Compression moulds and injection moulds; dimensional tolerances for moulding parts) |
| DIN 16752-1-1989 |
壓模和壓鑄模.澆口套 |
(Compression- and injection moulds; sprue bushes) |
| DIN 16757-1989 |
壓力鑄造工具和注塑工具.注入口拔具 |
(Compression and injection moulds; sprue puller) |
| DIN 16759-1992 |
壓力鑄造模.噴鑄模和壓模鑄造模.定心套筒 |
(Compression-, injection- and diecasting moulds; centering sleeves) |
| DIN 16760-1-1990 |
擠壓模具.注塑模具和壓鑄模具.不鉆孔的加工板 |
(Compression, injection and die-casting moulds; machined plates, undrilled) |
| DIN 16761-1992 |
壓力鑄造模.噴鑄模和壓模鑄造模.導柱 |
(Compression-, injection- and diecasting moulds; guide pillars) |
| DIN 16764-1998 |
鑄�；铐�(yè)工具規范 |
(Tool specification sheet for injection moulds) |
| DIN 16766-1-2001 |
模制工具.流體的冷卻系統.第1部分:模件上的連接螺紋套接和固定空間件 |
(Tools for moulding - Cooling systems for liquid fluids - Part 1: Connecting nipples and mounting spaces elements on the mould) |
| DIN 16769-2005 |
壓模和注模.澆注系統部件.術語 |
|
| DIN 16770-1-1989 |
塑料的檢驗.熱塑性模塑材料的樣品.模壓 |
(Testing of plastics; preparation of specimens of thermoplastic moulding materials by compression moulding) |
| DIN 16779-1-1988 |
塑料-模塑材料.聚甲基烯對酞酸鹽模塑材料.聚乙烯對酞酸鹽(PET)模塑材料和聚丁烯對酞酸鹽(PTB)模塑材料.分類 |
(Plastic moulding materials; polyalkylene terephthalate thermoplastics; polyethylene terephthalate (PET) and polybutylene terephthalate (PBT) thermoplastics; classification and designation) |
| DIN 16779-2-1990 |
塑料-模塑材料.對苯二甲酸亞苯基脂模塑材料.聚對苯二甲酸亞苯基脂(PET)和聚對苯二甲酸丁二脂(PBT)模塑材料. |
(Polyalkylene terephthalate moulding materials; preparation of specimens and determination of their properties) |
| DIN 16780-1-1988 |
塑料-模塑材料.聚合物混合料制熱塑性塑料模塑.分類和標記 |
(Plastic moulding materials; thermoplastic moulding materials of polymeric blends; classification and designation) |
| DIN 16780-2-1990 |
塑料-模塑材料.聚合混合物制熱塑模塑材料.試樣的制備和性能測定 |
(Polymer blend thermoplastic moulding materials; preparation of specimens and determination of their properties) |
| DIN 16781-1-1988 |
塑料-模塑材料.聚縮醛(POM)模塑材料.分類和標記 |
(Plastic moulding materials; polyoxymethylene (POM)-thermoplastics; classification and designation) |
| DIN 16781-2-1989 |
塑料-模塑材料.聚縮醛(POM)模塑材料.試樣的制造和性能測定 |
(Plastics moulding materials; polyoxymethylene (POM) moulding materials; preparation of specimens and determination of their properties) |
| DIN 16782-1-1991 |
塑料-模塑材料.聚四氟乙烯(PTFE)模塑材料.分類和標記 |
(Polytetrafluoroethylene (PTFE) moulding materials; classification and designation) |
| DIN 16782-2-1991 |
塑料-模塑材料.聚四氟乙烯(PTFE)模塑材料.試樣的制備和性能測定 |
(Polytetrafluoroethylene (PTFE) moulding materials; preparation of specimens and determination of properties) |
| DIN 16783-2-1991 |
塑料-模塑材料.超高分子聚乙烯模塑材料(PE-UHMW).試樣的制造和性能的測定 |
(Ultra-high molecular weight polyethylene (PE-UHMW) moulding materials; preparation of test specimens and determination of properties) |
| DIN 168-1-1998 |
主要用于玻璃容器的圓螺紋.螺紋尺寸 |
(Knuckle threads - Part 1: Especially for glass containers; thread sizes) |
| DIN 1680-1-1980 |
鑄件毛坯.一般公差及加工余量.總則 |
(Rough castings; general tolerances and machining allowances; general) |
| DIN 1680-2-1980 |
鑄件毛坯.一般公差系統 |
(Rough castings; general tolerance system) |
| DIN 16801-1983 |
聚碳酸酯(PC)板.尺寸 |
(Polycarbonat (PC) sheets; dimensions) |
| DIN 16809-1980 |
聚對苯二甲酸乙二醇酯(PETP)和聚對苯二甲酸相二酯(PBTP)空心棒.尺寸 |
(Hollow rods of circular cross-section of polyester (PETP and PBTP); dimensions) |
| DIN 1681-1985 |
普通用途的鑄鋼.交貨的技術條件 |
(Cast steels for general engineering purposes; technical delivery conditions) |
| DIN 16810-1980 |
聚對苯二甲酸乙二醇酯(PETP)和聚對苯二甲酸相二酯(PBTP)板.尺寸 |
(Sheets of polyester (PETP and PBTP); dimensions) |
| DIN 1683-1-1998 |
鑄鋼毛坯.一般公差及加工余量.不適于新結構 |
(Rough steel castings - General tolerances, machining allowances; inactive for new design) |
| DIN 16830-1-1991 |
高沖擊韌性聚氯乙烯制窗框.檢驗方法 |
(High impact polyvinyl chloride (PVC-HI) window profiles; testing) |
| DIN 16830-2-1991 |
高沖擊韌性聚氯乙烯制白色窗框.要求 |
(High impact white polyvinyl chloride (PVC-HI) window profiles; requirements) |
| DIN 16830-3-2000 |
高耐沖擊聚氯乙烯(PVC-HI)制門窗框.第3部分:表面著色框架.要求 |
(High impact polyvinyl chloride (PVC-HI) profiles for windows and doors - Part 3: Profiles with coloured surfaces; Requirements) |
| DIN 16830-4-2000 |
高耐沖擊聚氯乙烯(PVC-HI)制門窗框.第4部分:表面著色框架.試驗方法 |
(High impact polyvinyl chloride (PVC-HI) profiles for windows and doors - Part 4: Profiles with coloured surfaces; Test method) |
| DIN 16831-1-2003 |
聚丁烯(PB)制壓力管道用管連接件和部件.PB125.第1部分:承插焊接用噴射鑄造彎管.尺寸 |
(Pipe joints and components of polybuten (PB) for pipes under pressure - PB 125 - Part 1: Injection-moulded elbows for socket welding; Dimensions) |
| DIN 16831-2-2003 |
聚丁烯(PB)制壓力管道用管連接件和部件.PB125.第2部分:承插焊接用噴射鑄造三通管.尺寸 |
(Pipe joints and components of polybuten (PB) for pipes under pressure - PB 125 - Part 2: Injection-moulded tees for socket welding; Dimensions) |
| DIN 16831-3-2003 |
聚丁烯(PB)制壓力管道用管連接件和部件.PB125.第3部分:承插焊接用噴射鑄造套管和帽.尺寸 |
(Pipe joints and components of polybuten (PB) for pipes under pressure - PB 125 - Part 3: Injection-moulded sockets and caps for socket welding; Dimensions) |
| DIN 16831-4-2003 |
聚丁烯(PB)制壓力管道用管連接件和部件.PB125.第4部分:承插焊接用噴射鑄造異徑管.尺寸 |
(Pipe joints and components of polybuten (PB) for pipes under pressure - PB 125 - Part 4: Injection-moulded reducers for socket welding; Dimensions) |
| DIN 16831-5-1999 |
聚丁烯(PB)制壓力管道用管連接件和異型件.PB125.第5部分:一般質量要求.檢驗 |
(Pipe joints and components of polybutene (PB) for pipes under pressure; PB 125 - Part 5: General quality requirements, testing) |
| DIN 16831-6-2003 |
管道連接件和壓力管用聚丁烯(PB)件.第6部分.配件.尺寸 |
(Pipe joints and components of polybuten (PB) for pipes under pressure - PB 125 - Part 6: Fittings for resistance-welding; Dimensions) |
| DIN 16831-7-2004 |
壓力管道用聚丁烯(PB)管子接頭和件.PB125.第7部分:承插焊接用法蘭接頭、法蘭和密封環.尺寸 |
(Pipe joints and components of polybutene (PB) for pipes under pressure - PB 125 - Part 7: Flange adapters, flanges, sealing rings for socket welding, dimensions) |
| DIN 16831-7-2004 |
壓力管道用聚丁烯(PB)管子接頭和件.PB125.第7部分:承插焊接用法蘭接頭、法蘭和密封環.尺寸 |
|
| DIN 16832-1-2002 |
壓力管用氯化的聚氯乙烯管連接件和件.PVC-C200.第1部分:尺寸 |
(Pipe joints and components of chlorinated poly(vinyl chloride) (PVC-C) for pipes under pressure - PVC-C 200 - Part 1: Dimensions) |
| DIN 16832-2-2002 |
壓力管用氯化的聚氯乙烯管連接件和件.PVC-C200.第2部分:一般的質量檢驗要求 |
(Pipe joints and components of chlorinated poly(vinyl chloride) (PVC-C) for pipes under pressure - PVC-C 200 - Part 2: General quality requirements, testing) |
| DIN 16833-2001 |
提高了耐溫性的聚乙烯管.一般質量要求.試驗 |
(Polyethylene pipes of raised temperature resistance - General quality requirements, testing) |
| DIN 16834-2001 |
提高了耐溫性的聚乙烯管.尺寸 |
(Polyethylene pipes of raised temperature resistance - Dimensions) |
| DIN 1684-1-1998 |
可鍛鑄鐵毛坯.一般公差及加工余量.不適于新結構 |
(Steel raw castings of malleable iron - General tolerances, machining allowances; inactive for new design) |
| DIN 1685-1-1998 |
球墨鑄鐵毛坯.一般公差及加工余量.不適于新結構 |
(Rough castings of cast iron with spheroidal graphite - General tolerances, machining allowances; inactive for new design) |
| DIN 1686-1-1998 |
片狀石墨鑄鐵毛坯.一般公差及加工余量.不適于新結構 |
(Rough castings of grey iron - General tolerances, machining allowances; inactive for new design) |
| DIN 16864-1989 |
地板.墻壁.頂棚貼面粘合劑.彈性體鋪面用彌散.人造橡膠以及反應性粘合劑.要求和檢驗 |
(Dispersion, solvent-borne and multi-part adhesives for elastomer floor, wall and ceiling coverings; requirements and testing) |
| DIN 16867-1982 |
化工管道用玻璃纖維聚酯樹脂管.異型件和接頭.交貨技術條件 |
(Glass fibre reinforced polyester resin (UP-GF) pipes, fittings and joints for use in chemical pipelines; Technical delivery conditions) |
| DIN 16868-1-1994 |
玻璃纖維增強聚酯樹脂管材(UP-GF).第1部分:全卷繞.尺寸 |
(Glass fibre reinforced unsaturated polyester resin (UP-GF) pipes - Part 1: Wound, filled; dimensions) |
| DIN 16868-2-1994 |
玻璃纖維增強聚酯樹脂管材(UP-GF).第2部分:全卷繞.一般質量要求.檢驗 |
(Glass fibre reinforced unsaturated polyester resin (UP-GF) pipes - Part 2: Wound, filled; General quality requirements, testing) |
| DIN 16869-1-1995 |
離心澆注玻璃纖維增強聚脂樹脂管(VP-GF).第1部分:尺寸 |
(Centrifugally cast filled glass fibre reinforced unsaturated polyester resin (UP-GF) pipes - Part 1: Dimensions) |
| DIN 16869-2-1995 |
離心澆注玻璃纖維增強聚脂樹脂管(VP-GF).一般質量要求.檢驗 |
(Centrifugally cast filled glass fibre reinforced unsaturated polyester resin (UP-GF) pipes - Part 2: General quality requirements, testing) |
| DIN 1687-1-1998 |
重金屬合金的鑄件毛坯.砂模鑄造.一般公差及加工余量.不適于新結構 |
(Rough castings of heavy metal alloys - Sand mouldings - General tolerances, machining allowances; inactive for new design) |
| DIN 1687-3-1980 |
重金屬合金的鑄件毛坯.金屬模鑄造.一般公差及加工余量 |
(Rough castings of heavy metal alloys; gravity die castings, general tolerances, machining allowances) |
| DIN 1687-4-1986 |
重金屬合金的鑄件毛坯.壓鑄.一般公差及加工余量 |
(Heavy metal alloy raw castings; pressure die castings; general tolerances, machining allowances) |
| DIN 16870-1-1987 |
卷繞玻璃纖維增強環氧樹脂管.尺寸 |
(Wound glass fibre reinforced epoxy resin pipes; dimensions) |
| DIN 16871-1982 |
離心玻璃纖維增強環氧樹脂管.尺寸 |
(Centrifugally cast glass fibre reinforced epoxy resin (EP-GF) pipes; Dimensions) |
| DIN 16872-1993 |
熱塑性塑料管道用管連接件和管道部件.玻璃纖維增強聚酯樹脂法蘭(UP-GE).尺寸 |
(Pipe joints assemblies for pipelines of thermoplastics; glass fibre reinforced polyester resin (UP-GF) flanges; dimensions) |
| DIN 16873-1997 |
電纜保護管用未增塑聚氯乙稀(PVC-U)管和管配件.尺寸和技術交貨條件 |
(Pipes and fittings of unplasticized poly(vinyl chloride) (PVC-U) for cable ducting - Dimensions and technical delivery conditions) |
| DIN 16874-2000 |
電纜輸送管道用高密度聚乙烯(PE-HD)管道和管件.尺寸和技術提交條件 |
(Pipes and fittings of high-density polyethylene (PE-HD) for cable ducting - Dimensions and technical delivery conditions) |
| DIN 16875-1998 |
地下鋪設的保護管用未增塑聚氯乙烯(PVC-U)管和管件.尺寸和交貨技術條件 |
(Pipes and fittings of unplasticized poly(vinyl chloride) (PVC-U) for ducting - Dimensions and technical delivery conditions) |
| DIN 16876-2000 |
地下管道用高密度聚乙烯(PE-HD)管和配件.尺寸和交貨技術條件 |
(Pipes and fittings of high-density polyethylene (PE-HD) for buried ducting - Dimensions and technical delivery conditions) |
| DIN 1688-1-1998 |
輕金屬合金的鑄件毛坯.砂模鑄造.一般公差及加工余量.不適于新結構 |
(Rough castings of light metal alloys - Sand mouldings - General tolerances, machining allowances; inactive for new design) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com