標準號 |
中文名稱 |
英文名稱 |
| DIN EN ISO 14310-2003 |
石油和天然氣工業.下井設備.封隔器和橋塞 |
(Petroleum and natural gas industries - Downhole equipment - Packers and bridge plugs (ISO 14310:2001); German version EN ISO 14310:2001; German and English texts) |
| DIN EN ISO 14314-2004 |
往復式內燃機.反沖起動設備.一般安全要求 |
|
| DIN EN ISO 14327-2004 |
電阻焊接.電阻點焊、凸焊和縫焊的可焊性凸角的測定過程 |
|
| DIN EN ISO 14344-2005 |
焊接和類似工藝.熔化和氣體保護電焊過程.消耗品的采購指南 |
|
| DIN EN ISO 14344-2005 |
焊接和類似工藝.熔化和氣體保護電焊過程.消耗品的采購指南 |
|
| DIN EN ISO 14372-2002 |
焊接消耗物.通過測量可擴散氫測定手工金屬電弧焊電極的抗?jié)裥?/td>
| (Welding consumables - Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen (ISO 14372:2000); German version EN ISO 14372:2002) |
| DIN EN ISO 14402-1999 |
水質.流量分析方法測定苯酚指數(FIA和CFA) |
(Water quality - Determination of phenol index by flow analysis (FIA and CFA) (ISO 14402:1999); German version EN ISO 14402:1999) |
| DIN EN ISO 14403-2002 |
水質.用連續流量分析法測定總氰化物和游離氰化物含量 |
(Water quality - Determination of total cyanide and free cyanide by continuous flow analysis (ISO 14403:2002); German version EN ISO 14403:2002) |
| DIN EN ISO 14408-2005 |
激光手術用氣管掐管.標識及隨機文件要求 |
|
| DIN EN ISO 14419-1999 |
紡織材料.耐油性.耐碳氫化合物的試驗 |
(Textiles - Oil repellency - Hydrocarbon resistance test (ISO 14419:1998); German version EN ISO 14419:1999) |
| DIN EN ISO 14438-2002 |
建筑物用玻璃.能量平衡值的測定.計算法 |
(Glass in building - Determination of energy balance value - Calculation method (ISO 14438:2002); German version EN ISO 14438:2002) |
| DIN EN ISO 14453-1998 |
紙漿.丙酮-溶解物質的測定 |
(Pulps - Determination of acetone-soluble matter (ISO 14453:1997); German version EN ISO 14453:1998) |
| DIN EN ISO 14460-2002 |
汽車賽車手防護服.防熱和防火焰.性能要求和檢驗方法 |
(Protective clothing for automobile racing drivers - Protection against heat and flame - Performance requirements and test methods (ISO 14460:1999 + Amd. 1:2002) (includes Corrigendum AC:1999 and Amendment A1:2002); German version EN ISO 14460:1999 + AC:1 |
| DIN EN ISO 14501-1999 |
奶和奶粉.黃曲霉毒素M1含量的測定.用immunoaffinitiy色譜法提煉和用高效液體色譜分析法測定 |
(Milk and milk powder - Determination of aflatoxin M content - Clean-up by immunoaffinity chromatographie and determination by high-performance liquid chromatography (ISO 14501:1998); German version EN ISO 14501:1998) |
| DIN EN ISO 14509-2001 |
小型船舶.動力娛樂船發出的氣載噪聲的測定 |
(Small craft - Measurement of airborne sound emitted by powered recreational craft (ISO 14509:2000); German version EN ISO 14509:2000) |
| DIN EN ISO 14509/A1-2004 |
小艇.動力娛樂用艇發出的空氣噪音的測量.修改件1 |
|
| DIN EN ISO 14526-1-2000 |
塑料.酚醛粉末模塑化合物(PF-PMCs).第1部分:名稱與符號系統和基礎規范 |
(Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 1: Designation system and basis for specifications (ISO 14526-1:1999); German version EN ISO 14526-1:1999) |
| DIN EN ISO 14526-2-2000 |
塑料.酚醛粉末模塑化合物(PF-PMCs).第2部分:試樣的準備和特性的測定 |
(Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14526-2:1999); German version EN ISO 14526-2:1999) |
| DIN EN ISO 14526-3-2000 |
塑料.酚醛粉末模塑化合物(PF-PMCs).第3部分:對所選模塑化合物的要求 |
(Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14526-3:1999); German version EN ISO 14526-3:1999) |
| DIN EN ISO 14527-1-2000 |
塑料.脲甲醛和脲/蜜胺甲醛粉末模塑化合物(UF-和UF/MF-PMCs).第1部分:名稱與符號系統和基礎規范 |
(Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) - Part 1: Designation system and basis for specifications (ISO 14527-1:1999); German version EN ISO 14527-1:1999) |
| DIN EN ISO 14527-2-2000 |
塑料.脲甲醛和脲/蜜胺甲醛粉末模塑化合物(UF-和UF/MF-PMCs).第2部分:試樣的準備和特性的測定 |
(Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14527-2:1999); German version EN ISO 14527-2:1999) |
| DIN EN ISO 14527-3-2000 |
塑料.脲甲醛和脲/蜜胺甲醛粉末模塑化合物(UF-和UF/MF-PMCs).第3部分:對所選的模塑化合物的要求 |
(Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14527-3:1999); German version EN ISO 14527-3:1999) |
| DIN EN ISO 14528-1-2000 |
塑料.蜜胺甲醛粉末模塑化合物(MF-PMCs).第1部分:名稱與符號系統和基礎規范 |
(Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) - Part 1: Designation system and basis for specifications (ISO 14528-1:1999); German version EN ISO 14528-1:1999) |
| DIN EN ISO 14528-2-2000 |
塑料.蜜胺甲醛粉末模塑化合物(MF-PMCs).第2部分:試樣的準備和特性的測定 |
(Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14528-2:1999); German version EN ISO 14528-2:1999) |
| DIN EN ISO 14528-3-2000 |
塑料.蜜胺甲醛粉末模塑化合物(MF-PMCs).第3部分:對所選模塑化合物的要求 |
(Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14528-3:1999); German version EN ISO 14528-3:1999) |
| DIN EN ISO 14529-1-2000 |
塑料.蜜胺/酚醛粉末模塑化合物(MP-PMCs).第1部分:名稱與符號系統和基礎規范 |
(Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) - Part 1: Designation system and basis for specifications (ISO 14529-1:1999); German version EN ISO 14529-1:1999) |
| DIN EN ISO 14529-2-2000 |
塑料.蜜胺/酚醛粉末模塑化合物(MP-PMCs).第2部分:試樣的準備和特性的測定 |
(Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14529-2:1999); German version EN ISO 14529-2:1999) |
| DIN EN ISO 14529-3-2000 |
塑料.蜜胺/酚醛粉末模塑化合物(MP-PMCs).第3部分:對所選模塑化合物的要求 |
(Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14529-3:1999); German version EN ISO 14529-3:1999) |
| DIN EN ISO 14530-1-2000 |
塑料.非飽和聚酯粉末模塑化合物(UP-PMCs).第1部分:名稱與符號系統和基礎規范 |
(Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 1: Designation system and basis for specifications (ISO 14530-1:1999); German version EN ISO 14530-1:1999) |
| DIN EN ISO 14530-2-2000 |
塑料.非飽和聚酯粉末模塑化合物(UP-PMCs).第2部分:試樣的準備和特性的測定 |
(Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14530-2:1999); German version EN ISO 14530-2:1999) |
| DIN EN ISO 14530-3-2000 |
塑料.非飽和聚酯粉末模塑化合物(UP-PMCs).第3部分:對所選模塑化合物的要求 |
(Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14530-3:1999); German version EN ISO 14530-3:1999) |
| DIN EN ISO 14534-2002 |
眼科光學.接觸鏡片和接觸鏡片護理產品.基本要求 |
(Ophthalmic optics - Contact lenses and contact lens care products - Fundamental requirements (ISO 14534:2002); German version EN ISO 14534:2002) |
| DIN EN ISO 14539-2002 |
操作型工業機器人.用抓式鉗子進行物品傳遞.詞匯和特征表示 |
(Manipulating industrial robots - Object handling with grasp-type-grippers - Vocabulary and presentation of caracteristics (ISO 14539:2000); German version EN ISO 14539:2001) |
| DIN EN ISO 14554-1-2000 |
焊接質量要求.金屬材料的電阻焊接.第1部分:綜合質量要求 |
(Quality requirements for welding - Resistance welding of metallic materials - Part 1: Comprehensive quality requirements (ISO 14554-1:2000); German version EN ISO 14554-1:2000) |
| DIN EN ISO 14554-2-2000 |
焊接質量要求.金屬材料的電阻焊接.第2部分:基本質量要求 |
(Quality requirements for welding - Resistance welding of metallic materials - Part 2: Elementary quality requirements (ISO 14554-2:2000); German version EN ISO 14554-2:2000) |
| DIN EN ISO 14555-1998 |
焊接.金屬材料的電弧螺栓焊接 |
(Welding - Arc stud welding of metallic materials (ISO 14555:1998); German version EN ISO 14555:1998) |
| DIN EN ISO 14556-2000 |
鋼.卻貝V形切痕擺式沖擊試驗.儀器試驗法 |
(Steel - Charpy V-notch pendulum impact test - Instrumented test method (ISO 14556:2000); German version EN ISO 14556:2000) |
| DIN EN ISO 14557-2003 |
消防水龍帶.橡膠和塑料吸水軟管和軟管組件 |
(Fire-fighting hoses - Rubber and plastics suction hoses and hose assemblies (ISO 14557:2002); German version EN ISO 14557:2002) |
| DIN EN ISO 14565-2001 |
動物飼料.維生素A含量的測定.高性能液相色譜法 |
(Animal feeding stuffs - Determination of vitamin A content - Method using high-performance liquid chromatography (ISO 14565:2000); German version EN ISO 14565:2000) |
| DIN EN ISO 14577-1-2003 |
金屬材料.硬度和材料參數的儀器壓痕試驗.第1部分:試驗方法 |
(Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2002); German version EN ISO 14577-1:2002) |
| DIN EN ISO 14577-2-2003 |
金屬材料.硬度和材料參數的儀器壓痕試驗.第2部分:試驗機的檢定和校準 |
(Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines (ISO 14577-2:2002); German version EN ISO 14577-2:2002) |
| DIN EN ISO 14577-3-2003 |
金屬材料.硬度和材料參數的儀器壓痕試驗.第3部分:硬度標準塊的校準 |
(Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2002); German version EN ISO 14557-3:2002) |
| DIN EN ISO 14579-2002 |
圓柱頭內六角螺釘 |
(Hexalobular socket head cap screws (ISO 14579:2001); German version EN ISO 14579:2001) |
| DIN EN ISO 14580-2002 |
凸頭內六角螺釘 |
(Hexalobular socket cheese head screws (ISO 14580:2001); German version EN ISO 14580:2001) |
| DIN EN ISO 14583-2002 |
平頭內六角螺釘 |
(Hexalobular socket pan head screws (ISO 14583:2001); German version EN ISO 14583:2001) |
| DIN EN ISO 14584-2002 |
半埋頭內六角螺釘 |
(Hexalobular socket raised countersunk head screws (ISO 14584:2001); German version EN ISO 14584:2001) |
| DIN EN ISO 14585-2002 |
平頭內六角攻絲螺釘 |
(Hexalobular socket pan head tapping screws (ISO 14585:2001); German version EN ISO 14585:2001) |
| DIN EN ISO 14586-2002 |
沉頭內六角攻絲螺釘 |
(Hexalobular socket countersunk head tapping screws (ISO 14586:2001); German version EN ISO 14586:2001) |
| DIN EN ISO 14587-2002 |
半沉頭(橢圓形)內六角攻絲螺釘 |
(Hexalobular socket raised countersunk (oval) head tapping screws (ISO 14587:2001); Geman version EN ISO 14587:2001) |
| DIN EN ISO 14588-2001 |
沉頭鉚釘.術語和定義 |
(Blind rivets - Terminology and definitions (ISO 14588:2000); German version EN ISO 14588:2000) |
| DIN EN ISO 14589-2001 |
沉頭鉚釘.機械試驗 |
(Blind rivets - Mechanical testing (ISO 14589:2000); German version EN ISO 14589:2000) |
| DIN EN ISO 14593-2005 |
水質.水介質中有機化合物最大需氧生物降解能力的評價.密封容器中無機碳分析法(CO2頂空試驗) |
|
| DIN EN ISO 14596-1998 |
礦物油產品.硫含量測定.波長彌散X射線熒光光譜法 |
(Petroleum products - Determination of sulphur content - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 14596:1998); German version EN ISO 14596:1998) |
| DIN EN ISO 14597-1999 |
礦物油制品.釩和鎳含量的測定.波長分散X射線熒光分析法 |
(Petroleum products - Determination of vanadium and nickel content - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 14597:1997); German version EN ISO 14597:1999) |
| DIN EN ISO 1460-1995 |
金屬鍍層.鐵類材料的熱浸鍍鋅涂層.用重量測定法測定單位面積重量 |
(Metallic coatings - Hot dip galvanized coatings on ferrous materials - Gravimetric determination of the mass per unit area (ISO 1460:1992); German version EN ISO 1460:1994) |
| DIN EN ISO 14602-1998 |
穩定的外科植入物.骨接合術用植入物.特殊要求 |
(Non-active surgical implants - Implants for osteosynthesis - Particular requirements (ISO 14602-1998); German version EN ISO 14602:1995) |
| DIN EN ISO 1461 Bb.1-1999 |
通過鋼上熱鍍鋅產生的鋅鍍層(塊鍍鋅).要求和檢驗 |
(Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods; (ISO 1461:1999); indications of application of this standard) |
| DIN EN ISO 1461-1999 |
通過鋼上熱鍍鋅產生的鋅鍍層(塊鍍鋅).要求和檢驗 |
(Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:1999); German version EN ISO 1461:1999) |
| DIN EN ISO 14616-2004 |
塑料.聚乙烯、乙烯共聚物及其混合物的熱可縮薄膜.收縮應力的測定 |
|
| DIN EN ISO 14620-1-2005 |
航天系統.安全要求.第1部分:系統安全 |
|
| DIN EN ISO 1463-1995 |
金屬和氧化物鍍層.鍍層厚度的測定.顯微鏡法 |
(Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:1982); German version EN ISO 1463:1994) |
| DIN EN ISO 1463-2004 |
金屬和氧化物鍍層.鍍層厚度的測定.顯微鏡法 |
|
| DIN EN ISO 14630-1997 |
非活動外科植入物的一般要求 |
(Non-active surgical implants - General requirements (ISO 14630:1997); German version EN ISO 14630:1997) |
| DIN EN ISO 14631-1999 |
沖擊改良的聚苯乙烯(PS-I)的擠壓片.要求和試驗方法 |
(Extruded sheets of impact-modified polystyrene (PS-I) - Requirements and test methods (ISO 14631:1999); German version EN ISO 14631:1999) |
| DIN EN ISO 14632-1999 |
聚乙烯(PE-HD)的擠壓片材.要求和試驗方法 |
(Extruded sheets of polyethylene (PE-HD) - Requirements and test methods (ISO 14632:1998); German version EN ISO 14632:1998) |
| DIN EN ISO 14644-1-1999 |
無菌室和相關控制環境.第1部分:空氣清潔度分級 |
(Cleanroom and associated controlled environments - Part 1: Classification of air cleanliness (ISO 14644-1:1999); German version EN ISO 14644-1:1999) |
| DIN EN ISO 14644-2-2001 |
無菌室和相關控制環境.第2部分:連續證實與ISO14644-1相符的試驗和監測規范 |
(Cleanrooms and associated controlled environments - Part 2: Specifications for testing and monitoring to prove continued compliance with ISO 14644-1 (ISO 14644-2:2000); German version EN ISO 14644-2:2000) |
| DIN EN ISO 14644-4-2003 |
無菌室和相關受控環境.第4部分:設計、建造和運行 |
(Cleanrooms and associated controlled environments - Part 4: Design, construction and start up (ISO 14644-4:2001); German version EN ISO 14644-4:2001) |
| DIN EN ISO 14644-7-2005 |
潔凈室和相關控制環境.第7部分:分離設備(潔凈空氣罩、手套式操作箱、分離器和微環境) |
|
| DIN EN ISO 14660-1-1999 |
幾何產品規范(GPS).幾何特性.第1部分:一般術語與定義 |
(Geometrical Product Specifications (GPS) - Geometrical features - Part 1: General terms and definitions (ISO 14660-1:1999); German version EN ISO 14660-1:1999) |
| DIN EN ISO 14660-2-1999 |
幾何產品規范(GPS).幾何特性.第2部分:圓柱體和圓錐體中心線的確定、表面中心的確定、確定位置尺寸的要求 |
(Geometrical Product Specifications (GPS) - Geometrical features - Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature (ISO 14660-2:1999); German version EN ISO 14660-2:1999) |
| DIN EN ISO 14673-1-2002 |
牛奶和牛奶制品.測定硝酸鹽和亞硝酸鹽的含量.第1部分:鎘還原法和光譜測定法 |
(Milk and milk products - Determination of nitrate and nitrite contents - Part 1: Method using cadmium reduction and spectrometry (ISO 14673-1:2001); German version EN ISO 14673-1:2001) |
| DIN EN ISO 14673-1-2004 |
乳和乳制品.硝酸鹽和亞硝酸鹽含量的測定.第1部分:鎘還原和光譜測定法 |
|
| DIN EN ISO 14673-2-2002 |
牛奶和牛奶制品.測定硝酸鹽和亞硝酸鹽的含量.第2部分:分段式流體分析法(常規法) |
(Milk and milk products - Determination of nitrate and nitrite contents - Part 2: Method using segmented flow analysis (Routine method) (ISO 14673-2:2001); German version EN ISO 14673-2:2001) |
| DIN EN ISO 14673-2-2004 |
乳和乳制品.硝酸鹽和亞硝酸鹽含量的測定.第2部分:分層流分析法(常規法) |
|
| DIN EN ISO 14673-3-2002 |
牛奶和牛奶制品.測定硝酸鹽和亞硝酸鹽的含量.第3部分:鎘還原法和帶有流線滲析的流體注入分析法(常規法) |
(Milk and milk products - Determination of nitrate and nitrite contents - Part 3: Method using cadmium reduction and flow injection analysis with in-line dialysis (Routine method) (ISO 14673-3:2001); German version EN ISO 14673-3:2001) |
| DIN EN ISO 14673-3-2004 |
乳和乳制品.硝酸鹽和亞硝酸鹽含量的測定.第3部分:線滲析鎘還原和流注入分析法(常規法) |
|
| DIN EN ISO 14675-2003 |
牛奶和牛奶制品.競爭酶免疫分析法的標準化描述指南.黃曲霉毒素含量的測定 |
(Milk and milk products - Guidelines for a standardized description of competitive enzyme immunoassays - Determination of aflatoxin M1 content (ISO 14675:2003); German version EN ISO 14675:2003) |
| DIN EN ISO 14678-2005 |
膠粘劑.耐流動性的測定 |
|
| DIN EN ISO 14683-1999 |
建筑物中的熱橋.線性熱穿透系數.簡化方法和近似值 |
(Thermal bridges in building construction - Linear thermal transmittance - Simplified methods and default values (ISO 14683:1999); German version EN ISO 14683:1999) |
| DIN EN ISO 14688-1-2003 |
土工調查和試驗.土壤的識別和分類.第1部分:識別和描述 |
(Geotechnical investigation and testing - Identification and classification of soil - Part 1: Identification and description (ISO 14688-1:2002); German version EN ISO 14688-1:2002) |
| DIN EN ISO 14688-2-2004 |
土工調查和試驗.土壤的識別和分類.第2部分:分類總則 |
|
| DIN EN ISO 14689-1-2004 |
土工調查和試驗.巖石的鑒定和分類.第1部分:鑒定和描述 |
|
| DIN EN ISO 14691-2002 |
石油和天然氣工業.機械動力傳輸?shù)娜嵝择詈?一般用途 |
(Petroleum and natural gas industries - Flexible couplings for mechanical power transmission - General purpose applications (ISO 14691:1999); German version EN ISO 14691:2000 (German and english text)) |
| DIN EN ISO 14692-1-2005 |
石油和天然氣工業.玻璃纖維增強塑料(GRP)管.第1部分:詞匯、符號、應用和材料 |
|
| DIN EN ISO 14692-1-2005 |
石油和天然氣工業.玻璃纖維增強塑料(GRP)管.第1部分:詞匯、符號、應用和材料 |
|
| DIN EN ISO 14692-2-2005 |
石油和天然氣工業.玻璃纖維增強塑料(GRP)管.第2部分:合格鑒定和制造 |
|
| DIN EN ISO 14692-2-2005 |
石油和天然氣工業.玻璃纖維增強塑料(GRP)管.第2部分:合格鑒定和制造 |
|
| DIN EN ISO 14692-3-2005 |
石油和天然氣工業.玻璃纖維增強塑料(GRP)管.第3部分:系統設計 |
|
| DIN EN ISO 14692-3-2005 |
石油和天然氣工業.玻璃纖維增強塑料(GRP)管.第3部分:系統設計 |
|
| DIN EN ISO 14692-4-2005 |
石油和天然氣工業.玻璃纖維增強塑料(GRP)管.第4部分:制造、安裝和操作 |
|
| DIN EN ISO 14692-4-2005 |
石油和天然氣工業.玻璃纖維增強塑料(GRP)管.第4部分:制造、安裝和操作 |
|
| DIN EN ISO 14693-2005 |
石油和天然氣工業.鉆井和油井輔助設備 |
|
| DIN EN ISO 14693-2005 |
石油和天然氣工業.鉆井和油井輔助設備 |
|
| DIN EN ISO 14698-1-2004 |
潔凈室和相關控制環境.生物污染控制.第1部分:總則和方法 |
|
| DIN EN ISO 14698-2-2004 |
潔凈室和相關控制環境.生物污染控制.第2部分:生物污染數據的評估和說明 |
(Cleanrooms and associated controlled environments - Biocontamination control - Part 2: Evaluation and interpretation of biocontamination data (ISO 14698-2:2003); German version EN ISO 14698-2:2003) |
| DIN EN ISO 14698-2-2004 |
潔凈室和相關控制環境.生物污染控制.第2部分:生物污染數據的評估和說明 |
|
| DIN EN ISO 14713-1999 |
鐵和鋼結構的防腐.鋅和鋁涂層.指南 |
(Protection against corrosion of iron and steel in structures - Zinc and aluminium coatings - Guidelines (ISO 14713:1999); German version EN ISO 14713:1999) |
| DIN EN ISO 14723-2003 |
石油和天然氣工業.管道輸送系統.海底管道閥 |
(Petroleum and natural gas industries - Pipeline transportation systems - Subsea pipeline valves (ISO 14723:2001); German and english version EN ISO 14723:2001) |
| DIN EN ISO 14726-1-2001 |
船和造船技術.管道系統的內容識別顏色.第1部分:主顏色和媒介 |
(Ships and marine technology - Identification colours for the content of piping systems - Part 1: Main colours and media (ISO 14726-1:1999); German version EN ISO 14726-1:2001) |
| DIN EN ISO 14727-1999 |
牙科植入物.與牙科植入物上部結構相連接的預制件.技術文件的內容 |
(Dental implants - Prefabricated parts connecting suprastructures to dental implants - Contents of technical file (ISO 14727:1998); German version EN ISO 14727:1998) |
| DIN EN ISO 14729-2001 |
眼科光學.接觸鏡片護理產品.產品的微生物要求和試驗方法以及接觸鏡片衛生管理制度 |
(Ophthalmic optics - Contact lens care products - Microbiological requirements and test methods for products and regimens for hygienic management of contact lenses (ISO 14729:2001); German version EN ISO 14729:2001) |
| DIN EN ISO 14730-2001 |
眼科光學.接觸鏡片護理產品.抗菌防護效能試驗和測定報廢日期指南 |
(Ophthalmic optics - Contact lens care products - Antimicrobial preservative efficacy testing and guidance on determining discard date (ISO 14730:2000); German version EN ISO 14730:2000) |
| DIN EN ISO 14744-1-2000 |
焊接.電子束焊接機的驗收檢驗.第1部分:規則和驗收條件 |
(Welding - Acceptance inspection of electron beam welding machines - Part 1: Principles and acceptance conditions (ISO 14744-1:2000); German version EN ISO 14744-1:2000) |
| DIN EN ISO 14744-2-2000 |
焊接.電子束焊接機的驗收檢驗.第2部分:加速電壓特性的測量 |
(Welding - Acceptance inspection of electron beam welding machines - Part 2: Measurement of acceleration voltage characteristics (ISO 14744-2:2000); German version EN ISO 14744-2:2000) |
| DIN EN ISO 14744-3-2000 |
焊接.電子束焊接機的驗收檢驗.第3部分:束電流特性的測量 |
(Welding - Acceptance inspection of electron beam welding machines - Part 3: Measurement of beam current characteristics (ISO 14744-3:2000); German version EN ISO 14744-3:2000) |
| DIN EN ISO 14744-4-2000 |
焊接.電子束焊接機驗收規范.第4部分:焊接速度的測量 |
(Welding - Acceptance inspection of electron beam welding machines - Part 4: Measurement of welding speed (ISO 14744-4:2000); German version EN ISO 14744-4:2000) |
| DIN EN ISO 14744-5-2000 |
焊接.電子束焊接機驗收規范.第5部分:停機精確度的測量 |
(Welding - Acceptance inspection of electron beam welding machines - Part 5: Measurement of run-out accuracy (ISO 14744-5:2000); German version EN ISO 14744-5:2000) |
| DIN EN ISO 14744-6-2000 |
焊接.電子束焊接機驗收規范.第6部分:焊點位置穩定性的測量 |
(Welding - Acceptance inspection of electron beam welding machines - Part 6: Measurement of stability of spot position (ISO 14744-6:2000); German version EN ISO 14744-6:2000) |
| DIN EN ISO 1478-1999 |
自攻螺釘螺紋 |
(Tapping screw thread (ISO 1478:1999); German version EN ISO 1478:1999) |
| DIN EN ISO 14815-2005 |
道路運輸和交通遠程信息管理.自動車輛和設備識別.系統規范 |
|
| DIN EN ISO 14819-1-2005 |
交通和旅客信息(TTI).經過交通電文編碼的TTI電文.第1部分:無線電數據系統用編碼協議.使用ALERT-C的交通電文信道(RDS-TMC) |
|
| DIN EN ISO 14819-2-2005 |
交通和旅客信息(TTI).經過交通電文編碼的TTI電文.第2部分:無線電數據系統用事件和信息編碼.交通電文信道(RDS-TMC) |
|
| DIN EN ISO 14819-3-2004 |
交通和旅游信息(TTI).經過交通電文編碼的TTI電文.第3部分:ALERT-C的定位 |
|
| DIN EN ISO 14825-2005 |
智能運輸系統.地理數據文檔(GDF).總體數據規范 |
|
| DIN EN ISO 14847-1999 |
容積式回轉泵.技術要求 |
(Rotary positive displacement pumps - Technical requirements (ISO 14847:1999); German version EN ISO 14847:1999) |
| DIN EN ISO 14851-2004 |
水介質中塑料材料的富氧菌生物降解性的測定.封閉呼吸器中測定需氧量的方法 |
|
| DIN EN ISO 14852-2004 |
水介質中塑料材料的富氧菌生物降解性的測定.二氧化碳增量分析法 |
|
| DIN EN ISO 14855-2004 |
在控制復合條件下塑料材料的富氧菌生物降解性和非集合性的測定.二氧化碳增量分析法 |
|
| DIN EN ISO 14877-2003 |
用粒狀磨料進行噴砂操作用防護服 |
(Protective clothing for abrasive blasting operations using granular abrasives (ISO 14877:2002); German version EN ISO 14877:2002) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com