標準號 |
中文名稱 |
英文名稱 |
| DIN 1688-3-1980 |
輕金屬合金的鑄件毛坯.金屬模鑄造.一般公差及加工余量 |
(Light metal alloy raw castings; gravity die castings; general tolerances, machining allowances) |
| DIN 1688-4-1986 |
輕金屬合金的鑄件毛坯.壓鑄.一般公差及加工余量 |
(Light metal alloy raw castings; pressure die castings; general tolerances, machining allowances) |
| DIN 16887-1990 |
熱塑性塑料管的檢驗.持久內壓性能的測定 |
(Testing of thermoplastics pipes; determination of the behaviour to long term internal pressure) |
| DIN 16888-1-1989 |
熱塑性塑料管化學阻抗的評定.聚烯烴管 |
(Determination of chemical resistance of thermoplastics pipes; polyolefin pipes) |
| DIN 16888-2-1991 |
熱塑性塑料管化學阻抗的評定.未增塑聚氯乙烯管 |
(Determination of chemical resistance of thermoplastics pipes; unplasticized polyvinyl chloride (PVC-U) pipes) |
| DIN 16889-1-1989 |
熱塑性塑料管化學阻力系數的測定.聚烯烴管 |
(Determination of the chemical resistance factor for thermoplastics pipes; polyolefin pipes) |
| DIN 16890-1980 |
丙烯腈-丁二烯-苯乙烯或丙烯腈-苯乙烯酸脂制管.一般質量要求.檢驗 |
(Pipes of Acrylnitrile-Butadiene-Styrene (ABS) or Acrylnitrile-Styrene-Acrylester (ASA); General Quality Requirements; Testing) |
| DIN 16891-1980 |
丙烯腈-丁二烯-苯乙烯或丙烯腈-苯乙烯酸脂制管.尺寸 |
(Pipes of Acrylonitrile-Butadiene-Styrene (ABS) or Acrylonitrile-Styrene-Acrylester (ASA); Dimensions) |
| DIN 16892 Berichtigung 1-2001 |
DIN16892:2000-07的勘誤 |
(Corrigendum to DIN 16892:2000-07) |
| DIN 16892-2000 |
交聯聚乙烯(PE-X)管.一般要求和試驗 |
(Crosslinked polyethylene (PE-X) pipes - General requirements, testing) |
| DIN 16893 Berichtigung 1-2001 |
DIN16893:2000-09的勘誤 |
(Corrigendum to DIN 16893:2000-09) |
| DIN 16893-2000 |
交聯聚乙烯管(PE-X).尺寸 |
(Crosslinked polyethylene (PE-X) pipes - Dimensions) |
| DIN 16894 Berichtigung 1-2005 |
中等密度的交聯聚乙烯管(PE-MDX).一般質量要求和試驗.DIN 16894-1997的勘誤 |
|
| DIN 16894-1997 |
中等密度的交聯聚乙烯管(PE-MDX).一般質量要求.試驗 |
(Pipes of crosslinked medium density polyethylene (PE-MDX) - General quality requirements and testing) |
| DIN 16895-1996 |
均密度交聯聚乙烯管(PE-MDX).尺寸 |
(Crosslinked medium density polyethylene (PE-MDX) pipes - Dimensions) |
| DIN 1690-10-1991 |
金屬材料鑄件的交貨技術條件.高應力管件閥門用鑄鋼的補充規定 |
(Technical delivery conditions for castings of metallic materials; supplementary requirements for steel castings used for heavy-duty valves) |
| DIN 16901-1982 |
塑料成型件.縱向尺寸的公差和驗收條件 |
(Plastics mouldings; Tolerances and acceptance conditions for linear dimensions) |
| DIN 16903-1-1974 |
模塑用開口螺紋套 |
(Open Insert Nuts for Plastics Mouldings) |
| DIN 16903-2-1974 |
模塑用帶墊圈的閉口螺紋套 |
(Closed Insert Nuts with Disc for Plastics Mouldings) |
| DIN 16903-3-1974 |
模塑用閉口螺紋套 |
(Closed Insert Nuts with Dead Hole for Plastics Mouldings) |
| DIN 16903-4-1991 |
塑料模制件和壓鑄件用重型閉式螺紋件 |
(Insert nuts; heavy type for plastics mouldings and pressure die castings with dead hole) |
| DIN 16906-1989 |
塑料板和塑料薄膜的檢驗.試驗和試樣、取樣、預處理 |
(Testing of plastic sheeting and films; sample and specimen preparation and conditioning) |
| DIN 16911 Bb.-1972 |
塑料-模塑材料種類.聚酯樹脂-模壓塑料制成的標準試樣的性能 |
(Types of Plastic Moulding Materials; Properties of Standard Test Specimens Made of Polyester Resin Compression Moulding Materials) |
| DIN 16913-1-1981 |
塑料-模塑材料.增強的熱固性樹脂-模塑材料.概念、分類、縮寫符號 |
(Plastics; moulding materials; reinforced thermosetting moulding materials; definitions, classification) |
| DIN 16913-2-1981 |
塑料--模塑材料.增強的熱固性樹脂--模塑材料.標準試樣性能的測定 |
(Plastics; moulding materials; reinforced thermosetting moulding materials; prepreg; determination of properties of standardized test specimens) |
| DIN 16913-3-1981 |
塑料--模塑材料.增強的熱固性樹脂--模塑材料.能塑變的扁形預浸漬體.聚酯--樹脂墊.型號.要求 |
(Plastics; moulding materials; reinforced thermosetting moulding materials; sheet moulding compounds, types; specifications) |
| DIN 16916-1-1981 |
塑料.熱固性樹脂.酚醛樹脂.概念.分類 |
(Plastics; Thermosetting resins, Phenolic resins; Concept, classification) |
| DIN 16916-2-1987 |
塑料.熱固性樹脂.酚醛樹脂.檢驗方法 |
(Plastics; phenolic resins; testing) |
| DIN 16920-1981 |
粘膠.粘膠材料加工.概念 |
(Adhesives - Adhesive processing - Terms) |
| DIN 16922-1981 |
用塑料制成的柔性帶狀平幅物品.工藝分類 |
(Flexible sheet materials manufactured using plastics; technological classification) |
| DIN 16927-1988 |
非增塑的聚氯乙烯板.交貨技術條件 |
(Unplasticized polyvinyl chloride sheet; technical delivery conditions) |
| DIN 16928-1979 |
熱塑性塑料管道.管接頭.管道部件.管道敷設.一般原則 |
(Pipes of Thermoplastic Materials; Pipe Joints, Elements for Pipes, Laying; General Directions) |
| DIN 16935-1986 |
聚異丁烯(PIB)塑料密封板.與瀝青相溶.要求 |
(Polyisobutylene (PIB) waterproofing sheet; requirements) |
| DIN 16937-1986 |
增塑聚氯乙烯(PVC-P)塑料密封板.要求 |
(Plasticized polyvinyl chloride (PVC-P) waterproofing sheet compatible with bitumen; requirements) |
| DIN 16938-1986 |
增塑聚氯乙烯(PVC-P)塑料密封板.與瀝青不相容.要求 |
(Plasticized polyvinyl chloride (PVC-P) waterproofing sheet incompatible with bitumen; requirements) |
| DIN 16940-1964 |
軟聚氯乙烯擠壓軟管.無公差說明的尺寸允許偏差 |
(Extruded Hoses of Non-rigid PVC (Non-rigid Polyvinyl Chloride); Permissible Variations for Dimensions for which Tolerances are not Indicated) |
| DIN 16941-1986 |
熱塑性塑料的擠壓型材.尺寸.形狀和塑料層的一般公差 |
(Thermoplastics extruded profiles; general tolerances of size, form and orientation) |
| DIN 16942-1966 |
軟聚氯乙烯水管.尺寸 |
(Water-hoses of nonrigid PVC (nonrigid polyvinylchloride); dimensions) |
| DIN 16944-1988 |
玻璃纖維增強的熱固性樹脂模塑材料.檢驗方法 |
(Glass fibre reinforced reaction resin moulding materials; test methods) |
| DIN 16945-1989 |
活性樹脂.反應劑和活性樹脂模塑材料.檢驗方法 |
(Testing of resins, hardeners and accelerators, and catalyzed resins) |
| DIN 16946-1-1989 |
活性樹脂模塑材料.注模樹脂模塑材料.檢驗方法 |
(Cured casting resins; testing) |
| DIN 16946-2-1989 |
活性樹脂模塑材料.注模樹脂模塑材料.類型 |
(Cured casting resins; types) |
| DIN 16948-1-1975 |
玻璃纖維增強的熱固性樹脂模塑材料.分類和標志 |
(Glass fibre reinforced reaktion moulding materials in the moulded state; classification and designation) |
| DIN 16948-2-1975 |
玻璃纖維增強的熱固性樹脂模塑材料.特種模塑材料的性能 |
(Glass fibre reinforced reaktion moulding materials in the moulded state; properties of special moulding materials) |
| DIN 16954-1980 |
織物.信號服用的有塑料涂層的柔韌平面構型物品.要求.檢驗 |
(Coating fabrics manufactured using plastics used for warning clothing; requirements, test methods) |
| DIN 16956-1976 |
有沖擊韌性的改性苯乙烯丙烯脯共聚物(ABS或ASA)板.交貨的技術條件 |
(Sheets of impact resistant modified styrene-acrylonitrile-copolymers (ABS or ASA); technical delivery specifications) |
| DIN 16957-1985 |
聚甲基丙烯酸甲脂(PMMA)澆鑄板.交貨技術條件 |
(Cast polymethyl methacrylate (PMMA) sheets; technical delivery conditions) |
| DIN 16958-1981 |
聚甲基丙烯酸甲酯(PMMA)擠壓成型板.交貨的技術條件 |
(Extruded sheets of polymethylmethacrylate (PMMA); technical delivery specifications) |
| DIN 16959-1973 |
軟聚氯乙烯(PVC)板交貨的技術條件 |
(Sheets of plasticized polyvinylchlorid (PVC); technical delivery specifications) |
| DIN 16960-1-1974 |
熱塑料的焊接.一般原理 |
(Welding of Thermoplastics; Principles) |
| DIN 16961-1-2000 |
異型外壁和光滑管內壁的熱塑性材料管和配件.第1部分:尺寸 |
(Pipes and fittings of thermoplastic materials with profiled wall and smooth pipe inside - Part 1: Dimensions) |
| DIN 16961-2-2000 |
異型外壁和光滑管內壁的熱塑性材料管和配件.第2部分:技術交付規范 |
(Pipes and fittings of thermoplastics materials with profiled wall and smooth pipe inside - Part 2: Technical delivery specifications) |
| DIN 16962-1-1980 |
聚丙烯壓力管道用管連接和管道零件.1型和2型.對焊用結構預制彎管.尺寸 |
(Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Bends of Segmental Construction for Butt-welding, Dimensions) |
| DIN 16962-10-1989 |
聚丙烯壓力管道用管連接和管零件.1型、2型和3型.對焊用壓鑄管配件.尺寸 |
(Pipe joint assemblies and fittings for types 1 to 3 polypropylene (PP) pressure pipes; injection-moulded fittings for butt welding; dimensions) |
| DIN 16962-11-1980 |
聚丙烯壓力管道用管連接和管道零件.1型和2型.用于對焊的車削和沖壓異徑管件.尺寸 |
(Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Turned and Pressed Reducing Sockets for Butt-welding, Dimensions) |
| DIN 16962-12-1999 |
聚丙烯(PP)制壓力管道用管連接件和異型件.PP-H100,PP-B80和PP-R80.第12部分:套管焊接用凸臺,法蘭,密封圈.尺 |
(Pipe joints and components of polypropylene (PP) for pipes under pressure, PP-H 100, PP-B 80 and PP-R 80 - Part 12: Flange adapters, flanges, sealing rings for socket welding; dimensions) |
| DIN 16962-13-1987 |
聚丙烯壓力管道用管連接和管零件.1型和2型.管螺紋連接.尺寸 |
(Pipe joint assemblies and fittings for type 1 and type 2 polypropylene (PP) pressure pipes; pipe couplings; dimensions) |
| DIN 16962-2-1983 |
聚丙烯壓力管道用管連接和管道零件.1型和2型.分段結構對焊用結構預制T型管及支管.尺寸 |
(Pipe joint assemblies and fittings for types 1 and 2 polypropylene (PP) pressure pipes; tees and branches produced by segment inserts and necking for butt welding; dimensions) |
| DIN 16962-3-1980 |
聚丙烯壓力管道用管連接和管道零件.1型和2型.對焊用管成形彎頭.尺寸 |
(Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Bends Formed from Pipe for Butt-welding, Dimensions) |
| DIN 16962-4-1988 |
聚丙烯壓力管道用管連接和管道零件.1型和2型.對焊焊接發熱件凸肩法蘭、密封、尺寸 |
(Pipe joint assemblies and fittings for types 1 and 2 polypropylene (PP) pressure pipes; adaptors for fusion jointing, flanges and sealing elements; dimensions) |
| DIN 16962-5-2000 |
聚丙烯壓力管道用管連接和管道零件.PP-H100,PP-B80,PP-R80.第5部分:一般質量要求.試驗 |
(Pipe joints and components of polypropylene (PP) for pipes under pressure, PP-H 100, PP-B 80 and PP-R 80 - Part 5: General quality requirements, testing) |
| DIN 16962-6-1980 |
聚丙烯壓力管道用管連接和管道零件.1型和2型.套筒焊接用注塑彎頭.尺寸 |
(Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Injection Moulded Elbows for Socket-welding, Dimensions) |
| DIN 16962-7-1980 |
聚丙烯壓力管道用管連接和管道零件.1型和2型.套筒焊接用注塑三通.尺寸 |
(Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Injection Moulded Tee Pieces for Socket-welding, Dimensions) |
| DIN 16962-8-1980 |
聚丙烯壓力管道的管連接和管道零件.1型和2型.套筒焊接用注塑套管和管帽.尺寸 |
(Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Injection Moulded Sockets and Caps for Socket-welding, Dimensions) |
| DIN 16962-9-1983 |
聚丙烯壓力管道用管連接和管道零件.1型和2型.套筒焊接用注塑異徑管件與套管.尺寸 |
(Pipe joint assemblies and fittings for types 1 and 2 polypropylene (PP) pressure pipes; injection moulded reducers and nipples for socket welding; dimensions) |
| DIN 16963-1-1980 |
高密度聚乙烯壓力管道用管連接和管道零件.1型和2型.用于對焊的組合結構預制彎頭.尺寸 |
(Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Pipe Bends of Segmental Construction for Butt-welding, Dimensions) |
| DIN 16963-10-1980 |
高密度聚乙烯壓力管道用管連接和管道零件.1型和2型.套筒焊接用壓鑄的套筒與帽蓋.尺寸 |
(Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Injection Moulded Sockets and Caps for Socket-welding, Dimensions) |
| DIN 16963-11-1999 |
聚乙烯(PE)制壓力管道用管連接件和異型件.PE80和PE100.第11部分:套管焊接用凸臺,法蘭,密封圈.尺寸 |
(Pipe joints and components of polyethylene (PE) for pipes under pressure, PE 80 and PE 100 - Part 11: Flange adapters, flanges, sealing rings for socket welding; dimensions) |
| DIN 16963-13-1980 |
高密度聚乙烯壓力管道用管連接和管道零件.1型和2型.對焊用車削的和沖壓的縮徑管件.尺寸 |
(Pipe Joints and Elements for High Pressure Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Turned and Pressed Reducing Sockets for Butt-welding, Dimensions) |
| DIN 16963-14-1983 |
高密度聚乙烯壓力管道用管連接和管道零件.1型和2型.套筒焊接用壓鑄的縮徑管件與套管.尺寸 |
(Pipe joint assemblies and fittings for types 1 and 2 high-density polyethylene (HDPE) pressure pipes; injection moulded reducers and nipples for socket welding; dimensions) |
| DIN 16963-15-1987 |
高密度聚乙烯壓力管用管連接和管零件.螺紋管接頭.尺寸 |
(Pipe joint assemblies and fittings for high-density polyethylene (HDPE) pressure pipes; pipe couplings; dimensions) |
| DIN 16963-2-1983 |
高密度聚乙烯壓力管道用管連接和管道零件.1型和2型.用于對焊的組合結構預制三通與支管.尺寸 |
(Pipe joint assemblies and fittings for types 1 and 2 high-density polyethylene (HDPE) pressure pipes; tees and branches produced by segment inserts and necking for butt welding; dimensions) |
| DIN 16963-3-1980 |
高密度聚乙烯壓力管道用管連接與管道零件.1型和2型.對焊用管成型彎管.尺寸 |
(Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Pipe Bends for Butt-welding, Dimensions) |
| DIN 16963-4-1988 |
高密度聚乙烯壓力管用管連接和管零件.對焊接頭適配器.法蘭盤和密封用夾緊器.尺寸 |
(Pipe joint assemblies and fittings for high-density polyethylene (PE-HD) pressure pipes; adaptors for fusion jointing, flanges and sealing elements; dimensions) |
| DIN 16963-5-1999 |
加壓管道PE80和PE100用聚乙烯制管道連接件和異型件.第5部分:一般質量要求和測試 |
(Pipe joints and components of polyethylene (PE) for pipes under pressure, PE 80 and PE 100 - Part 5: General quality requirements, testing) |
| DIN 16963-6-1989 |
高密度聚乙烯壓力管用管連接和管零件.對焊用壓鑄管配件.尺寸 |
(Pipe joint assemblies and fittings for high-density polyethylene (PE-HD) pressure pipes; injection-moulded fittings for butt welding; dimensions) |
| DIN 16963-7-1989 |
高密度聚乙烯制壓力管道用管連接和管道零件.電阻焊接配件.尺寸 |
(Pipe joint assemblies and fittings for high-density polyethylene (PE-HD) pressure pipes; fittings for resistance welding; dimensions) |
| DIN 16963-8-1980 |
高密度聚乙烯壓力管道用管連接和管道零件.1型和2型.套筒焊接用壓鑄彎頭.尺寸 |
(Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Injection Moulded Elbows for Socket-welding, Dimensions) |
| DIN 16963-9-1980 |
高密度聚乙烯壓力管道用管連接和管道零件.1型和2型.套筒焊接用壓鑄彎三通管.尺寸 |
(Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Injection Moulded Tee Pieces for Socket-welding, Dimensions) |
| DIN 16964-1988 |
繞制玻璃纖維增強聚酯樹脂管.一般質量要求.檢驗 |
(Wound glass fibre reinforced polyester resins (UP-GF) pipes; general quality requirements and testing) |
| DIN 16965-1-1982 |
繞制玻璃纖維增強聚酯樹脂管.管型A.尺寸 |
(Wound glass fibre reinforced polyester resin (UP-GF); pipes, Type A pipes, dimensions) |
| DIN 16965-2-1982 |
繞制玻璃纖維增強聚脂樹酯管.管型B.尺寸 |
(Wound glass fibre reinforced polyester resin (UP-GF); pipes, Type B pipes, dimensions) |
| DIN 16965-4-1982 |
繞制玻璃纖維增強聚脂樹酯管.管型D.尺寸 |
(Wound glass fibre reinforced polyester resin (UP-GF); pipes, Type D pipes, dimensions) |
| DIN 16965-5-1982 |
繞制玻璃纖維增強聚脂樹酯管.管型E.尺寸 |
(Wound glass fibre reinforced polyester resin (UP-GF); pipes, Type E pipes, dimensions) |
| DIN 16966-1-1988 |
玻璃纖維增強聚酯樹脂異型件和連接件.一般質量要求.檢驗 |
(Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joint assemblies; fittings; general quality requirements and testing) |
| DIN 16966-2-1982 |
玻璃纖維增強聚酯樹脂異型件和連接件.彎管.尺寸 |
(Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joints; Elbows, Dimensions) |
| DIN 16966-4-1982 |
玻璃纖維增強聚酯樹脂異型件和連接件.三通噴嘴尺寸 |
(Glass fibre reinforced polyester resin (UP-GF) pipe fittings an joints; Tees, Nozzles, Dimensions) |
| DIN 16966-5-1982 |
玻璃纖維增強聚酯樹脂異型件和連接件.縮徑件.尺寸 |
(Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joints; Reducers, Dimensions) |
| DIN 16966-6-1982 |
玻璃纖維增強聚酯樹脂異型件和連接件.凸肩.法蘭.密封件.尺寸 |
(Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joint assemblies; collars, flanges, joint rings, dimensions) |
| DIN 16966-7-1995 |
玻璃纖維增強聚酯樹脂異形件和連接件.第7部分:凸肩.法蘭.法蘭密封件和層壓塑料件.一般質量要求.檢驗 |
(Pipe joints and their elements of glass fibre reinforced polyester resins - Part 7: Bushings, flanges, flanged and butt joints; general quality requirements and test methods) |
| DIN 16966-8-1982 |
玻璃纖維增強聚酯樹脂異型件和連接件.層壓塑料連接件.尺寸 |
(Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joints; Laminated joints; Dimensions) |
| DIN 16967-2-1982 |
玻璃纖維增強環氧樹脂異型件和連接件.彎管.三通尺寸 |
(Glass fibre reinforced epoxy resin (EP-GF) pipe fittings and joints; Elbows, Tees, Dimensions) |
| DIN 16968-1996 |
聚丁烯(PB)管.一般質量要求和檢驗 |
(Polybutene pipes (PB) - General quality requirements and testing) |
| DIN 16969-1997 |
聚丁烯(PB)管.PB125型.尺寸 |
(Pipes made of polybutene (PB) - PB 125 - Dimensions) |
| DIN 16970-1970 |
硬聚氯乙烯(PVC)制管子和管道零件連接用的粘膠.一般質量要求和檢驗 |
(Adhesives for Bonding Pipes and Pipe System Elements of Rigid PVC; General Quality Requirements and Testings) |
| DIN 16972-1995 |
高密聚乙烯(PE-UHMW),(PE-HMW),(PE-HD)制沖壓板.交貨技術條件 |
(Compression moulded plates made of polyethylene high density (PE-UHMW), (PE-HMW), (PE-HD) - Technical specifications) |
| DIN 16977-1980 |
聚縮醛(POM)板.尺寸 |
(Polyacetale (POM) sheets; dimensions) |
| DIN 16978-1975 |
聚縮醛(POM)空心棒.尺寸 |
(Polyacetale hollow rods of circular cross-section; dimensions) |
| DIN 16980-1987 |
熱塑性塑料圓棒.尺寸 |
(Thermoplastics rods; dimensions) |
| DIN 16982-1974 |
聚酰胺(PA)管.尺寸 |
(Polyamide tubes of circular cross-section (PA); dimensions) |
| DIN 16983-1980 |
聚酰胺(PA)空心棒.尺寸 |
(Hollow rods of circular cross-section of polyamide (PA); dimensions) |
| DIN 16984-1980 |
聚酰胺(PA)板.尺寸 |
(Polyamide (PA) sheets; dimensions) |
| DIN 16985-1989 |
熱塑性塑料的半成品.交貨技術條件 |
(Semi-finished thermoplastics products; technical delivery conditions) |
| DIN 16986-1987 |
熱塑性塑料扁棒.尺寸 |
(Thermoplastics flat bars; dimensions) |
| DIN 16995-1992 |
包裝用的薄膜.塑料薄膜.性能.檢驗方法 |
(Films for packaging; plastic films; properties, testing) |
| DIN 1701-1980 |
精煉鎳 |
(Refined nickel) |
| DIN 17014 Bb.2-1961 |
鋼鐵材料熱處理；專業術語的外語譯名 |
(Heat treating of iron and steel; translations of technical terms into foreign languages) |
| DIN 17014-3-1976 |
鋼鐵材料熱處理.熱處理簡要說明 |
(Heat treatment of ferrous materials; notation to indicate heat treatment processes) |
| DIN 1702-1967 |
鎳陽極 |
(Nickel Anodes) |
| DIN 17021-1-1976 |
鋼鐵材料熱處理.材料選擇.基于淬硬選擇鋼材 |
(Heat Treatment of Ferrous Metals; Material Selection; Steel Selection according to Hardenability) |
| DIN 17022-1-1994 |
鋼鐵材料熱處理.熱處理方法.部件的淬火,回火,貝氏體化和調質 |
(Heat treatment of ferrous materials - Methods of heat treatment - Part 1: Hardening, austempering, annealing, quenching, tempering of components) |
| DIN 17022-2-1986 |
鋼鐵材料熱處理.熱處理方法.工具的淬火和回火 |
(Heat treatment of ferrous materials; heat treatment methods; hardening and tempering of tools) |
| DIN 17022-3-1989 |
鋼鐵材料熱處理.熱處理方法.表面硬化處理 |
(Heat treatment of ferrous materials; heat treatment methods; case hardening) |
| DIN 17022-4-1998 |
鋼鐵材料熱處理.熱處理方法.第4部分:滲氮和硝基滲碳 |
Heat treatment of ferrous materials - Methods of heat treatment - Part 4: Nitriding and nitrocarburizing |
| DIN 17022-5-2000 |
鋼鐵材料熱處理.熱處理方法.第5部分:表面硬化 |
(Heat treatment of ferrous materials - Methods of heat treatment - Part 5: Surface hardening) |
| DIN 17023-2000 |
鋼鐵材料熱處理.(WBA)表格.熱處理說明 |
(Heat treatment of ferrous metals - (WBA) Forms - Heat-treatment order) |
| DIN 17052-1-2000 |
熱處理爐.溫度均勻性的要求 |
(Heat treatment furnaces - Part 1: Requirements for temperature uniformity) |
| DIN 1707-100-2001 |
軟釬焊合金.化學成份和形狀 |
(Soft solder alloys - Chemical compositions and forms) |
| DIN 17111-1980 |
螺釘.螺母及鉚釘用的低碳非合金鋼；交貨技術條件 |
(Low Carbon Unalloyed Steels for Bolts, Nuts and Rivets; Technical Conditions of Delivery) |
| DIN 17115-1987 |
焊接圓鋼鏈用鋼.交貨技術條件 |
(Steels for welded round link chains; technical delivery conditions) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com