標準號 |
中文名稱 |
英文名稱 |
| ASTM E 328-1986 |
材料和結構件的應力松弛試驗 |
Stress Relaxation Tests for Materials and Structures |
| ASTM E 329-2000 |
建筑用材料的試驗和/或檢查機構的標準規范 |
Standard Specification for Agencies Engaged in the Testing and/or Inspection of Materials Used in Construction |
| ASTM E 330-1997 |
用統一靜態氣壓差法測定外窗、幕墻和門結構性能的試驗方法 |
Test Method for Structural Performance of Exterior Windows, Curtain Walls and Doors by Uniform Static Air Pressure Difference |
| ASTM E 331-1996 |
用統一的靜態氣壓差法測定外窗,護墻和門滲水度的測試方法 |
Test Method for Water Penetration of Exterior Windows, Curtain Walls and Doors by Uniform Static Air Pressure Difference |
| ASTM E 334-2001 |
紅外線微量分析的一般技術的標準操作規程 |
Standard Practice for General Techniques of Infrared Microanalysis |
| ASTM E 335-1996 |
用均苯四酸二酐的脂化作用測定羥基團的試驗方法 |
Test Method for Hydroxyl Groups by Pyromellitic Dianhydride Esterification |
| ASTM E 336-1997 |
建筑物中隔音性能的測量試驗方法 |
Test Method for Measurement of Airborne Sound Insulation in Buildings |
| ASTM E 337-1984 |
干濕球濕度計測定濕度的試驗方法(濕球和干球溫度的測量) |
Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures) |
| ASTM E 338-1991 |
高強度薄板材料的銳切口張力試驗方法 |
Test Method of Sharp-Notch Tension Testing of High-Strength Sheet Materials |
| ASTM E 34-1994 |
鋁和鋁基合金化學分析的測試方法 |
Test Methods for Chemical Analysis of Aluminum and Aluminum Base Alloys |
| ASTM E 340-2000 |
金屬和合金宏觀腐蝕的標準試驗方法 |
Standard Test Method for Macroetching Metals and Alloys |
| ASTM E 341-1996 |
用能量平衡法測量等離子體電弧氣體焓 |
Measuring Plasma Arc Gas Enthalpy by Energy Balance |
| ASTM E 342-1999 |
鉻礦石中氧化鉻的標準試驗方法 |
Standard Test Method for Chromium Oxide in Chrome Ores |
| ASTM E 343-1996 |
通過分析裂變劑量計產生的鉬99的放射性來測定反應速率的試驗方法 |
Test Method for Measuring Reaction Rates by Analysis of Molybdenum-99 Radioactivity from Fission Dosimeters |
| ASTM E 344-2001 |
溫度測定和液體比重測定的有關術語 |
Terminology Relating to Thermometry and Hydrometry |
| ASTM E 344a-2001 |
溫度測定和液體比重測定的有關術語 |
Terminology Relating to Thermometry and Hydrometry |
| ASTM E 345-1993 |
金屬箔的抗拉試驗方法 |
Test Methods of Tension Testing of Metallic Foil |
| ASTM E 346-1999 |
甲醇分析的試驗方法 |
Test Methods for Analysis of Methanol |
| ASTM E 347-1998 |
多價酸中灰分的標準測試方法 |
Standard Test Method for Ash in Polybasic Acids |
| ASTM E 348-1969 |
適于人使用的空間設備 |
Man-Rated Space Facilities |
| ASTM E 349-1972 |
空間模擬裝置的有關術語 |
Terminology Relating to Space Simulation |
| ASTM E 35-1988 |
鎂和鎂合金的化學分析試驗方法 |
Test Methods for Chemical Analysis of Magnesium and Magnesium Alloys |
| ASTM E 350-1995 |
碳素鋼,低合金鋼,硅電爐鋼,鐵錠和熟鐵的化學分析的測試方法 |
Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron and Wrought Iron |
| ASTM E 351-1993 |
鑄鐵的化學分析方法.各種型號 |
Test Methods for Chemical Analysis of Cast Iron - All Types |
| ASTM E 352-1993 |
工具鋼及其它類似中合金鋼和高合金鋼的化學分析試驗方法 |
Test Methods for Chemical Analysis of Tool Steels and Other Similar Medium- and High-Alloy Steels |
| ASTM E 353-1993 |
不銹鋼、耐熱鋼、馬氏體鋼和其它類似的鉻鎳鐵合金的化學分析試驗方法 |
Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging and Other Similar Chromium-Nickel-Iron Alloys |
| ASTM E 354-1993 |
高溫鋼、電爐鋼、磁鋼和其它類似的鐵、鎳和鈷合金的化學分析試驗方法 |
Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic and Other Similar Iron, Nickel and Cobalt Alloys |
| ASTM E 355-1996 |
氣相色譜法的術語和相互關系 |
Gas Chromatography Terms and Relationships |
| ASTM E 356-1978 |
光譜儀的介紹和說明 |
Describing and Specifying the Spectrograph |
| ASTM E 357-1998 |
用過氧化鈉彈燃燒法測定有機化合物中磷的試驗方法 |
Test Method for Phosphorus in Organic Compounds by Sodium Peroxide Bomb Ignition |
| ASTM E 358-1995 |
磷酸分析的試驗方法 |
Test Methods for Analysis of Phosphoric Acid |
| ASTM E 359-2000 |
蘇打灰(純堿)分析的標準試驗方法 |
Standard Test Methods for Analysis of Soda Ash (Sodium Carbonate) |
| ASTM E 360-1996 |
硅和硅鐵的化學分析試驗方法 |
Test Methods for Chemical Analysis of Silicon and Ferrosilicon |
| ASTM E 361-1999 |
測定錳鐵中砷和鉛的標準試驗方法 |
Standard Test Methods for the Determination of Arsenic and Lead in Ferromanganese |
| ASTM E 362-1999 |
測定硅錳合金和硅鐵錳合金中砷和鉛的標準試驗方法 |
Standard Test Methods for the Determination of Arsenic and Lead in Silicomanganese and Ferrosilicon Manganese |
| ASTM E 363-1983 |
鉻和鉻鐵合金的化學分析試驗方法 |
Methods for Chemical Analysis of Chromium and Ferrochromium |
| ASTM E 364-1994 |
硅鉻鐵化學分析的測試方法 |
Test Methods for Chemical Analysis of Ferrochrome-Silicon |
| ASTM E 365-1990 |
釩鐵合金和釩合金摻和劑的化學分析試驗方法 |
Test Methods for Chemical Analysis of Ferrovanadium and Vanadium Alloying Additives |
| ASTM E 367-1983 |
鈳鐵合金的化學分析試驗方法 |
Methods for Chemical Analysis of Ferrocolumbium |
| ASTM E 37-1995 |
鉛錠的化學分析試驗方法 |
Test Methods for Chemical Analysis of Pig Lead |
| ASTM E 371-1989 |
硼鐵合金的化學分析試驗方法 |
Test Methods for Chemical Analysis of Ferroboron |
| ASTM E 372-1984 |
鎂鐵硅合金的化學分析試驗方法 |
Test Method for Chemical Analysis of Magnesium Ferrosilicon |
| ASTM E 376-1996 |
用磁場或渦流(電磁的)試驗法測量覆層厚度 |
Measuring Coating Thickness by Magnetic-Field or Eddy-Current (Electromagnetic) Test Methods |
| ASTM E 377-1996 |
燒蝕材料內部溫度的測量 |
Internal Temperature Measurements in Ablative Materials |
| ASTM E 378-1997 |
用粉末技術做銀的光譜分析試驗方法 |
Test Method for Spectrographic Analysis of Silver by the Powder Technique |
| ASTM E 381-1998 |
由棒材、坯段、大方坯和鍛件組成的鋼制品的宏觀浸蝕試驗、檢驗及評定 |
Macroetch Testing, Inspection and Rating Steel Products, Comprising Bars, Billets, Blooms and Forgings |
| ASTM E 382-1997 |
測定鐵礦石塊破碎強度的試驗方法 |
Test Method for Determination of Crushing Strength of Iron Ore Pellets |
| ASTM E 384-1999 |
材料顯微硬度的標準試驗方法 |
Standard Test Method for Microindentation Hardness of Materials |
| ASTM E 385-1990 |
使用14兆電子伏特的中子活化和直接計數技術測定含氧量的試驗方法 |
Test Method for Oxygen Content Using a 14-MeV Neutron Activation and Direct-Counting Technique |
| ASTM E 386-1990 |
與高分辨率核磁共振(NMR)分光計有關的數據說明 |
Data Presentation Relating to High-Resolution Nuclear Magnetic Resonance (NMR) Spectroscopy |
| ASTM E 387-1984 |
用不透明濾光器估算分光光度計雜散輻射功率的試驗方法 |
Test Method for Estimating Stray Radiant Power Ratio of Spectrophotometers by the Opaque Filter Method |
| ASTM E 388-1972 |
熒光分光計的光譜帶寬和光波波長精密度的測試方法 |
Test Method for Spectral Bandwidth and Wavelength Accuracy of Fluorescence Spectrometers |
| ASTM E 389-1993 |
用4號篩(4.75mm)及較粗篩進行金屬軸承礦石及相關材料的粒徑或篩分的試驗方法 |
Test Method for Particle Size or Screen Analysis at No. 4 (4.75-mm) Sieve and Coarser for Metal Bearing Ores and Related Materials |
| ASTM E 390-2001 |
鋼熔焊連接用標準參考射線照片 |
Standard Reference Radiographs for Steel Fusion Welds |
| ASTM E 391-1995 |
相位圖的表示 |
Presentation of Phase Diagrams |
| ASTM E 393-1996 |
通過分析由裂變劑量計產生的鋇140來測定反應速率的試驗方法 |
Test Method for Measuring Reaction Rates by Analysis of Barium- 140 from Fission Dosimeters |
| ASTM E 394-2000 |
用1,10-菲咯啉法測定痕量鐵值的標準試驗方法 |
Standard Test Method for Iron in Trace Quantities Using the 1,10-Phenanthroline Method |
| ASTM E 395-1995 |
用燃燒碘酸鹽滴定法對鐵礦石中硫量的測試方法 |
Test Method for Total Sulfur in Iron Ore by Combustion-Iodate Titration |
| ASTM E 396-1998 |
鎘的化學分析試驗方法 |
Test Methods for Chemical Analysis of Cadmium |
| ASTM E 399-1990 |
金屬材料水平變形斷裂強度的測試方法 |
Test Method for Plane-Strain Fracture Toughness of Metallic Materials |
| ASTM E 4-1999 |
試驗機的力驗證 |
Force Verification of Testing Machines |
| ASTM E 400-1997 |
用燃燒檢測預精選技術對礦石、礦物和巖石做光譜測定分析的標準試驗方法 |
Standard Test Method for Analysis of Ores, Minerals, and Rocks by the Fire Assay Preconcentration Optical Emission Spectroscopy |
| ASTM E 402-1995 |
用鎵氧載體技術作鈾氧化物(U308)光譜分析的測試方法 |
Standard Test Method for Spectrographic Analysis of Uranium Oxide (U308) |
| ASTM E 404-1995 |
用點對面技術測定碳素鋼和低合金鋼中硼含量的光譜測定的測試方法 |
Test Method for Spectrographic Determination of Boron in Carbon and Low Alloy Steel by the Point-to-Plane Technique |
| ASTM E 405-1989 |
窗轉軸的磨損試驗方法 |
Test Methods for Wear Testing Rotary Operators for Windows |
| ASTM E 406-1981 |
光譜化學分析中大氣的監測 |
Using Controlled Atmospheres in Spectrochemical Analysis |
| ASTM E 407-1999 |
金屬和合金微蝕的標準操作規程 |
Standard Practice for Microetching Metals and Alloys |
| ASTM E 408-1971 |
用監測儀技術測定表面正�？傒椛涞脑囼灧椒� |
Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques |
| ASTM E 409-1985 |
微光度計的樣式和性能的標準規程 |
Standard Practice for Description and Performance of the Microphotometer |
| ASTM E 41-1992 |
狀態調節的有關術語 |
Terminology Relating to Conditioning |
| ASTM E 410-1998 |
液氯中水和殘渣的試驗方法 |
Test Method for Moisture and Residue in Liquid Chlorine |
| ASTM E 411-1992 |
用2,4-二硝基苯肼測定羥基化合物痕量的試驗方法 |
Test Method for Trace Quantities of Carbonyl Compounds with 2,4-Dinitrophenylhydrazine |
| ASTM E 412-1993 |
液氯檢定的試驗方法(鋅汞合金法) |
Test Method for Assay of Liquid Chlorine (Zinc Amalgam Method) |
| ASTM E 413-1987 |
隔音等級的分類 |
Classification for Rating Sound Insulation |
| ASTM E 415-1999 |
碳和低合金鋼光輻射真空光譜測定分析的測試方法 |
Test Method for Optical Emission Vacuum Spectrometric Analysis of Carbon and Low-Alloy Steel |
| ASTM E 416-1998 |
光譜化學實驗室的計劃和安全操作 |
Planning and Safe Operation of a Spectrochemical Laboratory |
| ASTM E 421-1988 |
高純度鐵中硅和鋁含量的光譜測定的試驗方法 |
Test Method for Spectrographic Determination of Silicon and Aluminum in High-Purity Iron |
| ASTM E 422-1999 |
用水冷量熱計測量熱通量的標準試驗方法 |
Standard Test Method for Measuring Heat Flux Using a Water-Cooled Calorimeter |
| ASTM E 423-1971 |
升溫時非傳導樣品的正常光譜發射試驗方法 |
Test Method for Normal Spectral Emittance at Elevated Temperatures of Nonconducting Specimens |
| ASTM E 424-1971 |
簿板材料的太陽能傳播和反射的試驗方法 |
Test Methods for Solar Energy Transmittance and Reflectance (Terrestrial) of Sheet Materials |
| ASTM E 426-1998 |
無縫焊接管形產品、奧氏體不銹鋼的類似合金的電磁(渦電流)檢驗 |
Electromagnetic (Eddy-Current) Examination of Seamless and Welded Tubular Products, Austenitic Stainless Steel and Similar Alloys |
| ASTM E 427-1995 |
用鹵素檢漏器(堿離子二極管)作泄漏試驗 |
Testing for Leaks Using the Halogen Leak Detector (Alkali-Ion Diode) |
| ASTM E 428-1992 |
超聲波檢驗用鋼標準塊的制造和管理規程 |
Fabrication and Control of Steel Reference Blocks Used in Ultrasonic Inspection |
| ASTM E 429-1978 |
用積分球儀測量和計算金屬表面反射性的試驗方法 |
Test Method for Measurement and Calculation of Reflecting Characteristics of Metallic Surfaces Using Integrating Sphere Instruments |
| ASTM E 430-1997 |
用濾色測角光度計測定高度光滑表面光滑度的試驗方法 |
Test Methods for Measurement of Gloss of High-Gloss Surfaces by Goniophotometry |
| ASTM E 431-1996 |
半導體器件及有關器件的X射線照片的指南 |
Guide to Interpretation of Radiographs of Semiconductors and Related Devices |
| ASTM E 432-1991 |
滲漏試驗方法的選擇 |
Selection of a Leak Testing Method |
| ASTM E 433-1971 |
液體滲透檢查用參考圖片 |
Reference Photographs for Liquid Penetrant Inspection |
| ASTM E 434-1971 |
用太陽模擬裝置作陽光吸收與半球發光量的比率及半球發光量的熱量計測定的試驗方法 |
Test Method for Calorimetric Determination of Hemispherical Emittance and the Ratio of Solar Absorptance to Hemispherical Emittance Using Solar Simulation |
| ASTM E 436-1991 |
鐵素體鋼的墜重破裂試驗方法 |
Test Method for Drop-Weight Tear Tests of Ferritic Steels |
| ASTM E 437-1992 |
工業用金屬絲布及篩(方孔系列) |
Industrial Wire Cloth and Screens (Square Opening Series) |
| ASTM E 438-1992 |
實驗室用玻璃器皿 |
Glasses in Laboratory Apparatus |
| ASTM E 439-1998 |
鈹化學分析的試驗方法 |
Test Methods for Chemical Analysis of Beryllium |
| ASTM E 444-1998 |
審訊文件方面涉及法學工作領域的說明 |
Descriptions of Scopes of Work Relating to Forensic Sciences for Questioned Document Area |
| ASTM E 445/E 445M-1988 |
裝有足尺寸輪胎的客車在鋪覆路面上剎車距離的試驗方法 |
Test Method for Stopping Distance on Paved Surfaces Using a Passenger Vehicle Equipped with Full-Scale Tires |
| ASTM E 446-1998 |
鋼鑄件厚度在2 in(51mm)以下用基準射線照相 |
Reference Radiographs for Steel Castings up to 2 in. (51 mm) in Thickness |
| ASTM E 447-1997 |
砌塊抗壓強度的試驗方法 |
Test Methods for Compressive Strength of Masonry Prisms |
| ASTM E 448-1982 |
金屬材料的回跳硬度試驗 |
Scleroscope Hardness Testing of Metallic Materials |
| ASTM E 449-1996 |
氯化鈣分析的試驗方法 |
Test Methods for Analysis of Calcium Chloride |
| ASTM E 45-1997 |
鋼中雜質含量的測定 |
Determining the Inclusion Content of Steel |
| ASTM E 452-1997 |
用光測高溫計作耐火金屬熱電偶校準的試驗方法 |
Test Method for Calibration of Refractory Metal Thermocouples Using an Optical Pyrometer |
| ASTM E 453-1979 |
燃料件的包覆檢驗包括機械性能的測定 |
Examination of Fuel Element Cladding Including the Determination of the Mechanical Properties |
| ASTM E 454-1980 |
工業用多孔板及篩(方孔系列) |
Industrial Perforated Plate and Screens (Square Opening Series) |
| ASTM E 455-1998 |
建筑物用構架地板或屋面薄膜結構的靜負荷試驗 |
Static Load Testing of Framed Floor or Roof Diaphragm Constructions for Buildings |
| ASTM E 456-1996 |
統計學名詞及相關術語 |
Terminology Relating to Quality and Statistics |
| ASTM E 457-1996 |
用熱容量(芯棒)熱量計測量傳熱速率的試驗方法 |
Test Method for Measuring Heat-Transfer Rate Using a Thermal Capacitance (Slug) Calorimeter |
| ASTM E 458-1972 |
燒蝕的熱試驗方法 |
Test Method for Heat of Ablation |
| ASTM E 459-1997 |
用薄皮熱量計測量熱傳遞速率的試驗方法 |
Test Method for Measuring Heat Transfer Rate Using a Thin-Skin Calorimeter |
| ASTM E 460-1988 |
食品和飲料在貯藏期間的包裝效果的測定 |
Determining Effect of Packaging on Food and Beverage Products During Storage |
| ASTM E 463-1998 |
用硅鉬酸鹽(光度計)法測定熒石中二氧化硅含量的試驗方法 |
Test Method for Silica in Fluorspar by the Silico-Molybdate (Photometric) Method |
| ASTM E 465-1995 |
錳礦石中二氧化錳含量的試驗方法 |
Test Methods for Manganese Dioxide in Manganese Ores |
| ASTM E 466-1996 |
金屬材料上進行的恒定振幅軸向疲勞試驗 |
Conducting Constant Amplitude Axial Fatigue Tests of Metallic Materials |
| ASTM E 467-1998 |
軸向負載疲勞試驗系統中恒振幅動態負載的驗證 |
Verification of Constant Amplitude Dynamic Loads on Displacements in an Axial Load Fatigue Testing System |
| ASTM E 468-1990 |
金屬材料恒振幅疲勞試驗結果的顯示規程 |
Presentation of Constant Amplitude Fatigue Test Results for Metallic Materials |
| ASTM E 47-1993 |
鋅壓鑄合金的化學分析試驗方法 |
Test Methods for Chemical Analysis of Zinc Die-Casting Alloys |
| ASTM E 471-1996 |
用機械加工法和稱重法獲得燒蝕材料炭密度縱面圖的試驗方法 |
Test Method for Obtaining Char Density Profile of Ablative Materials by Machining and Weighing |
| ASTM E 473-1994 |
與熱分析相關的術語的定義 |
Definitions of Terms Relating to Thermal Analysis |
| ASTM E 475-1995 |
用氣體色層分離分析法檢定二特丁基過氧化物的試驗方法 |
Test Method for Assay of Di-Tert-Butyl Peroxide by Gas Chromatographic Analysis |
| ASTM E 476-1987 |
封閉的冷凝系統中熱不穩定性的試驗方法 |
Test Method for Thermal Instability of Confined Condensed Phase Systems (Confinement Test) |
| ASTM E 477-1999 |
測定導管襯里材料及預制消音材料的音響及氣流特性的標準試驗方法 |
Standard Test Method for Measuring Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com