標準號 |
中文名稱 |
英文名稱 |
| ASTM E 1739-1995 |
噴油現場糾正危險作用用的標準指南 |
Standard Guide for Risk-Based Corrective Action Applied at Petroleum Release Sites |
| ASTM E 1740-1995 |
用錐形熱量計測定墻面覆層材料的釋熱率及其它耐火試驗響應特性的標準試驗方法 |
Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wallcovering Composites Using a Cone Calorimeter |
| ASTM E 1741-1995 |
原子光譜分析用放射性強度衰減時空氣中微粒鉛樣品制備的標準規程 |
Standard Practice for Preparation of Airborne Particulate Lead Samples Collected During Abatement and Construction Activities for Subsequent Analysis by Atomic Spectrometry |
| ASTM E 1742-1995 |
放射照象檢驗標準實用規程 |
Standard Practice for Radiographic Examination |
| ASTM E 1743-1996 |
道路標志材料測量用便協式反光鏡的選擇和使用用標準實用規程 |
Standard Practice for Selection and Use of Portable Retroreflectometers for the Measurement of Pavement Marking Materials |
| ASTM E 1744-1998 |
計算機患者記錄中緊急醫療處理形式的標準指南 |
Standard Guide for View of Emergency Medical Care in the Computerized Patient Record |
| ASTM E 1745-1997 |
混凝土板下土壤或粒狀填料接觸的水蒸氣緩凝劑用標準規范 |
Standard Specification for Water Vapor Retarders Used in Contact with Soil or Granular Fill under Concrete Slabs |
| ASTM E 1746-1995 |
液態氯其他雜質取樣和分析的標準試驗方法 |
Standard Test Method for Sampling and Analysis of Liquid Chlorine for Gaseous Impurities |
| ASTM E 1747-1995 |
超臨界流體應用中二氧化碳純度標準指南 |
Standard Guide for Purity of Carbon Dioxide Used in Supercritical Fluid Applications |
| ASTM E 1748-1995 |
評定紗窗和窗戶作為一個整體系統相配合程度的標準試驗方法 |
Standard Test Method for Evaluating the Engagement Between Windows and Insect Screens as an Integral System |
| ASTM E 1749-2000 |
剛性壁可再定位掩蔽物的相關標準術語 |
Standard Terminology Relating to Rigid Wall Relocatable Shelters |
| ASTM E 175-1982 |
顯微鏡用術語 |
Terminology of Microscopy |
| ASTM E 1750-1995 |
水三相點瓶標準使用指南 |
Standard Guide for Use of Water Triple Point Cells |
| ASTM E 1751-1995 |
非字符表示熱電偶溫度電動勢表標準指南 |
Standard Guide for Temperature Electromotive Force (EMF) Tables for Non-Letter Designated Thermocouple Combinations |
| ASTM E 1752-1995 |
與乙二醇脫水劑有關的多媒體現場輻射和釋放數據的采集標準指南 |
Standard Guide for Collection of Multi-Media Field Emission and Discharge Data Associated with Glycol Dehydration Units |
| ASTM E 1753-2001 |
干漆膜中鉛含量檢測用定性化學抽查試驗工具標準規程 |
Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films |
| ASTM E 1754-1995 |
用紅外線分光光度法測定液體氯中低水平標準測試方法 |
Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry |
| ASTM E 1755-2001 |
生物物質中灰分的標準測試方法 |
Standard Test Method for Ash in Biomass |
| ASTM E 1756-2001 |
生物物質中總固體量的標準測試方法 |
Standard Test Method for Determination of Total Solids in Biomass |
| ASTM E 1757-2001 |
化合物分析用生物物質制備的標準實施規范 |
Standard Practice for Preparation of Biomass for Compositional Analysis |
| ASTM E 1758-2001 |
用高效液相色譜法測定生物物質中碳水化合物的標準試驗方法 |
Standard Test Method for Determination of Carbohydrates in Biomass by High Performance Liquid Chromatography |
| ASTM E 1759-1995 |
蛋白質中異天門冬氨酸的標準測試方法.天門冬酰胺脫酰胺基制品的測定方法 |
Standard Test Method for Isoaspartic Acid in Proteins: Method for the Determination of Asparagine Deamidation Products |
| ASTM E 176-2001 |
防火標準的標準術語 |
Standard Terminology of Fire Standards |
| ASTM E 1760-1996 |
含放射性殘余物的松散材料的無約束處理的標準導則 |
Standard Guide for Unrestricted Disposition of Bulk Materials Containing Residual Amounts of Radioactivity |
| ASTM E 1761-1995 |
金屬疲勞和破裂數據計算機化中用的數據錄制推薦格式的標準導則 |
Standard Guide for Recommended Formats for Data Records Used in Computerization of Fatigue and Fracture Data of Metals |
| ASTM E 1762-1995 |
保健信息的電子鑒定用標準指南 |
Standard Guide for Electronic Authentication of Health Care Information |
| ASTM E 1763-1998 |
化學分析方法的實驗室間試驗結果的解釋和使用的標準指南 |
Standard Guide for Interpretation and Use of Results from Interlaboratory Testing of Chemical Analysis Methods |
| ASTM E 1765-1998 |
利用分析體系過程(AHP)進行有關建筑物和建筑系統投資的多屬性決策分析的標準實用規程 |
Standard Practice for Applying Analytical Hierarchy Process (AHP) to Multiattribute Decision Analysis of Investments Related to Buildings and Building Systems |
| ASTM E 1766-1995 |
醫療裝置再使用的消毒處理的有效性的標準測試方法 |
Standard Test Method for Determination of Effectiveness of Sterilization Processes for Reusable Medical Devices |
| ASTM E 1767-1995 |
材料外觀特性的觀察和測量的幾何規定用標準使用規程 |
Standard Practice for Specifying the Geometry of Observations and Measurements to Characterize the Appearance of Materials |
| ASTM E 1768-1995 |
淡水魚的肺換氣行為毒理學試驗用標準導則 |
Standard Guide for Ventilatory Behavioral Toxicology Testing of Freshwater Fish |
| ASTM E 1769-1995 |
電子健康記錄和記錄系統特性的標準指南 |
Standard Guide for Properties of Electronic Health Records and Record Systems |
| ASTM E 177-1990 |
ASTM試驗方法中精密度和偏倚術語的使用 |
Use of the Terms Precision and Bias in ASTM Test Methods |
| ASTM E 1770-1995 |
電熱原子吸收光譜儀器優化的標準實用規程 |
Standard Practice for Optimization of Electrothermal Atomic Absorption Spectrometric Equipment |
| ASTM E 1771-1995 |
測定陽極和粗銅中含銅量的標準測試方法 |
Standard Test Method for Determination of Copper in Anode and Blister Copper |
| ASTM E 1772-1995 |
用電感技術測試色譜測量介質顆粒粒度分布的標準測試方法 |
Standard Test Method for Particle Size Distribution of Chromatography Media by Electric Sensing Zone Technique |
| ASTM E 1773-1995 |
用聚硫化基密封材料的剛性壁軍用掩蔽物的密封標準實用規程 |
Standard Practice for Sealing Rigid Wall Tactical Shelters with Polysulfide Based Sealants |
| ASTM E 1774-1996 |
電磁聲學傳感器用標準指南 |
Standard Guide for Electromagnetic Acoustic Transducers (EMATs) |
| ASTM E 1775-1996 |
鉛的現場提取和現場分析用便協式電子化學或光度分光儀的性能評定標準指南 |
Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead |
| ASTM E 1776-1996 |
火災危險評定標準開發用標準指南 |
Standard Guide for Development of Fire-Risk-Assessment Standards |
| ASTM E 1777-1996 |
鋪路管理需用數據的優化用標準指南 |
Standard Guide for Prioritization of Data Needs for Pavement Management |
| ASTM E 1778-1998 |
有關路面龜裂的標準術語 |
Standard Terminology Relating to Pavement Distress |
| ASTM E 1779-1996 |
經營室外燥聲測量用測量方案的擬定用標準指南 |
Standard Guide for Preparing a Measurement Plan for Conducting Outdoor Sound Measurements |
| ASTM E 178-1994 |
進行遠距離觀測 |
Dealing with Outlying Observations |
| ASTM E 1780-1996 |
戶外附近固定聲源的聲音接收性測量標準導則 |
Standard Guide for Measuring Outdoor Sound Received from a Nearby Fixed Source |
| ASTM E 1781-1998 |
聲發射傳感器的二次校準標準規程 |
Standard Practice for Secondary Calibration of Acoustic Emission Sensors |
| ASTM E 1782-1998 |
用熱分析法測定蒸氣壓力的標準試驗方法 |
Standard Test Method for Determining Vapor Pressure by Thermal Analysis |
| ASTM E 1783-1996 |
建筑物和停車場建筑的預制結構密封帶的技術規范 |
Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures |
| ASTM E 1784-1997 |
丙烯腈中過氧化物總含量的標準試驗方法 |
Standard Test Method for Total Peroxides in Acrylonitrile |
| ASTM E 1785-1996 |
丙烯腈標準規范 |
Standard Specification for Acrylonitrile |
| ASTM E 1786-1996 |
在線紅外分光光度法測定液氯中水的低等級的標準試驗方法 |
Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry |
| ASTM E 1787-1996 |
離子色譜法測定苛性鈉和苛性堿(氫氧化鈉和氫氧化鉀)中陰離子的標準試驗方法 |
Standard Test Method for Anions in Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide) by Ion Chromatography |
| ASTM E 1788-1996 |
丙烯腈中酸度的標準測試方法 |
Standard Test Method for Acidity in Acrylonitrile |
| ASTM E 1789-1996 |
書寫墨水識別的標準導則 |
Standard Guide for Writing Ink Identification |
| ASTM E 179-1996 |
材料的反射和透射性能測量用幾何條件的選擇 |
Selection of Geometric Conditions for Measurement of Reflection and Transmission Properties of Materials |
| ASTM E 1790-1996 |
近紅外線定性分析用標準實用規程 |
Standard Practice for Near Infrared Qualitative Analysis |
| ASTM E 1791-1996 |
半球形幾何結構的近紅外線儀器反射系數傳送標準的標準規程 |
Standard Practice for Transfer Standards for Reflectance Factor for Near-Infrared Instruments Using Hemispherical Geometry |
| ASTM E 1792-2001 |
表層灰土中鉛清除取樣材料的標準規范 |
Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
| ASTM E 1793-1996 |
連入泡沫和梁型可運輸遮蔽物中鋁合金的制備標準規程 |
Standard Practice for Preparation of Aluminum Alloy for Bonding in Foam and Beam Type Transportable Shelters |
| ASTM E 1794-1996 |
用于粘結泡沫中心夾層面板(200 華氏度,高濕設備)的膠粘劑的標準規范 二型面板 |
Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (200(degree)F Elevated Humidity Service), Type II Panels |
| ASTM E 1795-1996 |
建筑物含鉛漆用非增強液體涂層封裝產品標準規范 |
Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
| ASTM E 1796-1997 |
建筑物中含鉛漆的液體涂層封裝產品的選擇和使用標準指南 |
Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
| ASTM E 1797-1996 |
建筑物中含鉛漆用增強的液體涂層封裝產品用標準規范 |
Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
| ASTM E 1798-1996 |
有機化學生物降解評估可處理性的標準試驗方法 |
Standard Test Method for Assessing Treatability or biodegradability, or Both, of Organic Chemicals in Porous Pots |
| ASTM E 1799-1996 |
光電模件可視檢測標準規程 |
Standard Practice for Visual Inspections of Photovoltaic Modules |
| ASTM E 18-2002 |
金屬材料洛氏硬度和洛氏表面硬度的標準試驗方法 |
Standard Test Methods for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials |
| ASTM E 180-1999 |
工業化學制品的分析和試驗的ASTM的方法的精確度測定的標準規程 |
Standard Practice for Determining the Precision of ASTM Methods for Analysis and Testing of Industrial Chemicals |
| ASTM E 1800-1996 |
粘接泡沫中心夾層面板(160 華氏溫度,高濕設備)的膠粘劑的標準規范 一型面板 |
Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (160(degree)F Elevated Humidity Service), Type I Panels |
| ASTM E 1801-1996 |
粘接泡沫和梁型掩體用鋁飾面板標準實用規程 |
Standard Practice for Adhesive Bonding of Aluminum Facings in Foam and Beam Type Shelters |
| ASTM E 1802-2001 |
光電模件的隔濕組件試驗的標準測試方法 |
Standard Test Methods for Wet Insulation Integrity Testing of Photovoltaic Modules |
| ASTM E 1803-1999 |
測定絕緣板結構容量的標準試驗方法 |
Standard Test Methods for Determining Structural Capacities of Insulated Panels |
| ASTM E 1804-1996 |
項目設計階段的執行和成本分析報告的標準規程 |
Standard Practice for Performing and Reporting Cost Analysis During the Design Phase of a Project |
| ASTM E 1805-1996 |
重力法測定銅濃縮物中金的試金分析標準試驗方法 |
Standard Test Method for Fire Assay Determination of Gold in Copper Concentrates by Gravimetry |
| ASTM E 1806-1996 |
化合物測定鋼鐵標準樣品的標準操作 |
Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition |
| ASTM E 1807-1996 |
有關金屬連接板的標準術語 |
Standard Terminology Pertaining to Metal Connector Plates |
| ASTM E 1808-1996 |
設計和操縱可視實驗標準指南 |
Standard Guide for Designing and Conducting Visual Experiments |
| ASTM E 1809-2001 |
便攜式反光鏡測量高度可視反光工作服標志材料的標準試驗方法 |
Standard Test Method for Measurement of High-Visibility Retroreflective-Clothing Marking Material Using a Portable Retrorelectometer |
| ASTM E 181-1998 |
放射性核素探測器的校準和分析的一般方法 |
General Methods for Detector Calibration and Analysis of Radionuclides |
| ASTM E 1810-1996 |
評估曝露在外的魚在氣味和味道上污染結果的標準規程 |
Standard Practice for Evaluating Effects of Contaminants on Odor and Taste of Exposed Fish |
| ASTM E 1811-1996 |
老鼠和小家鼠致瘤性研究的標準試驗方法 |
Standard Test Method for Oncogenicity Study in Rats and Mice |
| ASTM E 1812-1996 |
火焰原子吸收光譜儀器的最優化標準實用規程 |
Standard Practice for Optimization of Flame Atomic Absorption Spectrometric Equipment |
| ASTM E 1813-1996 |
掃描探測顯微鏡探頭測量和報告的標準操作 |
Standard Practice for Measuring and Reporting Probe Tip probe in Scanning Probe Microscopy |
| ASTM E 1814-1996 |
涂層的計算機層析X射線攝影術(CT)標準實用規程 |
Standard Practice for Computed Tomographic (CT) Examination of Castings |
| ASTM E 1815-1996 |
工業放射攝影膠片系統分類用標準試驗方法 |
Standard Test Method for Classification of Film Systems for Industrial Radiography |
| ASTM E 1816-1996 |
用電磁聲傳導(EMAT)技術的超聲波檢驗用標準實用規程 |
Standard Practice for Ultrasonic Examinations Using Electromagnetic Acoustic Transducer (EMAT) Techniques |
| ASTM E 1817-1996 |
使用質量表示指示儀(RQI)的放射檢驗的質量控制標準實用規程 |
Standard Practice for Controlling Quality of Radiological Examination by Using Representative Quality Indicators (RQIs) |
| ASTM E 1818-1996 |
能量在80至300Kev的放射處理用電子束設施中的劑量測量用標準實用規程 |
Standard Practice for Dosimetry in an Electron Beam Facility for Radiation Processing at Energies Between 80 and 300 keV |
| ASTM E 1819-1996 |
核設備退役的環境監測計劃標準導則 |
Standard Guide for Environmental Monitoring Plans for Decommissioning of Nuclear Facilities |
| ASTM E 1820-2001 |
裂紋韌性測量的標準試驗方法 |
Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 1821-2001 |
用氣相色譜法測定生物物質中的碳水化合物的標準試驗方法 |
Standard Test Method for Determination of Carbohydrates in Biomass by Gas Chromatography |
| ASTM E 1822-1999 |
堆積椅子耐火試驗的標準試驗方法 |
Standard Test Method for ire Testing of Stacked Chairs |
| ASTM E 1823-1996 |
疲勞和裂紋試驗相關的標準術語 |
Standard Terminology Relating to Fatigue and Fracture Testing |
| ASTM E 1824-1996 |
拉力下熱機械分析的玻璃轉變溫度分配的標準試驗方法 |
Standard Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis Under Tension |
| ASTM E 1825-1996 |
建筑外墻材料,產品和系統評估的標準指南 |
Standard Guide for Evaluation of Exterior Building Wall Materials, Products, and Systems |
| ASTM E 1826-1996 |
低揮發有機化合物的標準規范:用于鋁合金粘接的防腐粘接起始端 |
Standard Specification for low Volatile Organic Compound; Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded |
| ASTM E 1827-1996 |
用風孔門測定建筑物空氣密封性的標準試驗方法 |
Standard Test Methods for eDtermining Airtightness of buildings Using an Orifice Blower Door |
| ASTM E 1828-1996 |
涂料鉛化學污染試驗盒性能特性評估的標準指南 |
Standard Guide for Evaluating the Performance characteristics of Qualitative Chemical Spot Test Kits for Lead in Paint |
| ASTM E 1829-1997 |
先于表面分析的樣品處置標準指南 |
Standard Guide for Handling Specimens Prior to Surface Analysis |
| ASTM E 1830-2001 |
測定光電壓模數的機械一體性的標準試驗方法 |
Standard Test Methods for Determining Mechanical Integrity of Photovoltaic Modules |
| ASTM E 1830M-1996 |
測定光電器件模數的機械整體性的標準試驗方法 |
Standard Test Methods for Determining Mechanical Integrity of Photovoltaic Modules (Metric) |
| ASTM E 1831-1996 |
準備與金屬和相關材料化學組成有關的參考資料證書的標準指南 |
Standard Guide for Preparing Certificates for Reference materials Relating to Chemical Composition of Metals, Ores, and Related Materials |
| ASTM E 1832-1996 |
描述直流等離子光譜發射計特性的標準操作 |
Standard Practice for Describing and Specifying a Direct-Current-Plasma Optical Emission Spectrometer |
| ASTM E 1833-1996 |
泡銅鑄造化合物組成測定取樣的標準操作 |
Standard Practice for Sampling of Blister Copper in Cast for the Determination of Chemical Composition |
| ASTM E 1834-1996 |
電熱原子吸收光譜法對鎳合金中鉛測定的標準試驗方法 |
Standard Test Method for Determination of Lead in Nickel alloys by Electrothermal Atomic Absorption Spectrometric Method |
| ASTM E 1835-1996 |
閃爍原子吸收光譜術對鎳合金分析的標準試驗方法 |
Standard Test Method for Analysis of Nickel Alloys by Flame atomic Absorption Spectrometry |
| ASTM E 1836-2001 |
設備管理用建筑物樓板面積測量的標準分類 |
Standard Classification for Building Floor Area Measurements for Facility Management |
| ASTM E 1837-1996 |
可再利用醫療設備(模擬使用試驗)消毒過程功效測定的標準試驗方法 |
Standard Test Method to Determine Efficacy of Disinfection processes for Reusable Medical Devices (Simulated Use Test) |
| ASTM E 1838-1996 |
液體衛生洗手劑的病毒消除非活性測定的標準試驗方法 |
Standard Test Method for Determining the Virus-Eliminating inactiveness of Liquid Hygienic Handwash Agents Using the Fingerpads of Adult Volunteers |
| ASTM E 1839-1996 |
造紙工業細菌和黏真菌黏液消除劑功效的標準試驗方法 |
Standard Test Method for Efficacy of Slimicides for the paper Industry-Bacterial and Fungal Slime |
| ASTM E 184-1979 |
高能中子輻射對金屬材料機械性能的影響.E706(IB) |
Standard Practice for Effects of High-Energy Neutron Radiation on the Mechanical Properties of Metallic Materials, E706 |
| ASTM E 1840-1996 |
分光劑校準ROMAN轉換標準的標準指南 |
Standard Guide for Raman Shift Standards for Spectrometer calibration |
| ASTM E 1841-1996 |
新水中露出水面的大型植物植物毒素重新誘導的標準指南 |
Standard Guide for Conducting Renewal Phytotoxicity Tests Freshwater Emergent Macrophytes |
| ASTM E 1842-1996 |
金屬材料宏觀洛氏硬度試驗的標準試驗方法 |
Standard Test Method for Macro-Rockwell Hardness Testing of metallic Materials |
| ASTM E 1843-1996 |
性騷擾調查,檢驗和證據收集的標準指南 |
Standard Guide for Sexual Assault Investigation, examination, and Evidence Collection |
| ASTM E 1844-1996 |
尺寸10 X 4-5平滑螺紋摩擦試驗輪胎的標準規范 |
Standard Specification for Size 10 X 4-5 Smooth-Tread friction Test Tire |
| ASTM E 1845-2001 |
鋪地織物中間縱面深度計算的標準實施規程 |
Standard Practice for Calculating Pavement Macrotexture Mean Profile Depth |
| ASTM E 1847-1996 |
ASTM指南下毒素試驗統計分析的標準操作規程 |
Standard Practice for Statistical Analysis of Toxicity Tests execucted Under ASTM Guidelines |
| ASTM E 1848-1996 |
生態污染點的選擇和使用的標準指南 |
Standard Guide for Selecting and Using Ecological Endpoints Contaminated Sites |
| ASTM E 1849-1996 |
魚和野生動物監測和報告的標準指南 |
Standard Guide for Fish and Wildlife Incident Monitoring and Reporting |
| ASTM E 185-1998 |
為輕水冷卻核反應堆容器的實施監督試驗,E 706 (IF) |
Conducting Surveillance Tests for Light-Water Cooled Nuclear Power Reactor Vessels, E 706 (IF) |