ASTM——美國材料與實驗協會標準翻譯目錄查詢

咨詢熱線：010-6973-5438

標準號	中文名稱	英文名稱
ASTM D 698-2000	實驗室中用12400ft-lbt/ft3(600KN-m/m3)標準作用力測定土壤壓力特性的標準試驗方法	Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/ft3 (600 kN-m/m3))
ASTM D 70-1997	半固態瀝青材料比重和密度的試驗方法	Test Method for Specific Gravity and Density of Semi-Solid Bituminous Materials
ASTM D 704-1999	三聚氰胺甲醛模制化合物	Melamine-Formaldehyde Molding Compounds
ASTM D 705-1999	脲甲醛模制化合物	Urea-Formaldehyde Molding Compounds
ASTM D 706-1998	乙酸纖維素模制和擠壓化合物	Cellulose Acetate Molding and Extrusion Compounds
ASTM D 707-1998	乙酸丁酸纖維素模制與擠壓化合物	Cellulose Acetate Butyrate Molding and Extrusion Compounds
ASTM D 709-2000	層壓熱固性材料標準規范	Standard Specification for Laminated Thermosetting Materials
ASTM D 71-1994	固體硬瀝青和地瀝青的相對密度試驗方法(變位法)	Test Method for Relative Density of Solid Pitch and Asphalt (Displacement Method)
ASTM D 710-1997	電絕緣用硫化纖維薄板、桿材和管	Vulcanized Fibre Sheets, Rods and Tubes Used for Electrical Insulation
ASTM D 711-1989	路標漆不粘著時間的試驗方法	Test Method for No-Pick-up Time of Traffic Paint
ASTM D 713-1990	路標漆進行路面使用的試驗方法	Conducting Road Service Tests on Fluid Traffic Marking Materials
ASTM D 714-1987	涂料起泡程度的試驗方法	Test Method for Evaluating Degree of Blistering of Paints
ASTM D 720-1991	煤自由膨脹指數的試驗方法	Test Method for Free-Swelling Index of Coal
ASTM D 721-1997	石油蠟含油量的試驗方法	Test Method for Oil Content of Petroleum Waxes
ASTM D 724-1999	紙表面可濕性的測試方法(接觸角法)	Test Method for Surface Wettability of Paper (Angle-of-Contact Method)
ASTM D 726-1994	空氣中無孔紙的透氣性的測試方法	Test Method for Resistance of Nonporous Paper to Passage of Air
ASTM D 727-1996	真空方法測定屋頂和地板油氈煤油值的試驗方法	Test Method for Kerosine Number of Roofing and Flooring Felt by the Vacuum Method
ASTM D 729-1995	偏二氯乙烯模塑化合物	Vinylidene Chloride Molding Compounds
ASTM D 731-1995	熱固模塑料粉末的模塑指數的試驗方法	Test Method for Molding Index of Thermosetting Molding Powder
ASTM D 732-1999	用穿孔工具對塑料剪切強度的測試方法	Test Method for Shear Strength of Plastics by Punch Tool
ASTM D 737-1996	紡織纖維透氣率的試驗方法	Test Method for Air Permeability of Textile Fabrics
ASTM D 740-1994	丁酮	Methyl Ethyl Ketone
ASTM D 746-1995	用沖擊法測定塑料及彈性材料的脆化溫度的試驗方法	Test Method for Brittleness Temperature of Plastics and Elastomers by Impact
ASTM D 747-1999	用懸臂梁法對塑料表面彎曲模量的測試方法	Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
ASTM D 748-1971	固定式云母介電電容器用天然云母塊和云母薄片	Natural Block Mica and Mica Films Suitable for Use in Fixed Mica-Dielectric Capacitors
ASTM D 75-1997	集料的抽樣	Sampling Aggregates
ASTM D 750-1995	用碳弧型裝置和風化裝置對橡膠變質的測試方法	Test Method for Rubber Deterioration in Carbon - Arc Weathering Apparatus
ASTM D 751-2000	涂層織物的標準試驗方法	Standard Test Methods for Coated Fabrics
ASTM D 756-1978	在加速條件下塑料形狀和重量變化的測試方法	Determination of Weight and Shape Changes of Plastics Under Accelerated Service Conditions
ASTM D 76-1999	紡織材料的拉伸試驗機	Tensile Testing Machines for Textiles
ASTM D 763-1981	未加工棕土和焙燒棕土顏料	Raw and Burnt Umber Pigments
ASTM D 768-1981	黃色氧化鐵的水合物	Yellow Iron Oxide Hydrated
ASTM D 769-1987	黑色合成氧化鐵	Black Synthetic Iron Oxide
ASTM D 770-1995	異丙醇	Isopropyl Alcohol
ASTM D 772-1986	外部涂料劑落程度評價的試驗方法	Test Method for Evaluating Degree of Flaking (Scaling) of Exterior Paints
ASTM D 774/D 774M-1997	紙張抗破碎強度的試驗方法	Test Method for Bursting Strength of Paper
ASTM D 776-1992	干熱對紙和紙板特性的影響的試驗方法	Test Method for Determination of Effect of Dry Heat on Properties of Paper and Board
ASTM D 777-1997	經過處理的紙和紙板易燃性的標準試驗方法	Standard Test Methods for Flammability of Treated Paper and Paperboard
ASTM D 778-1997	紙萃取物中氫離子濃度(pH)的標準試驗方法(熱萃取和冷萃取法)	Standard Test Methods for Hydrogen Ion Concentration (pH) of Paper Extracts (Hot- Extraction and Cold-Extraction Procedures)
ASTM D 779-1994	紙、紙板和其他印刷材料用干燒指示器法測試耐水性的測試方法	Test Method for Water Resistance of Paper, Paperboard and Other Sheet Materials by the Dry Indicator Method
ASTM D 780-1995	紙印刷油墨滲透性的測試方法(蓖麻油試驗)	Test Method for Printing Ink Permeation of Paper (Castor Oil Test)
ASTM D 782-1982	在回轉六角鼓中作船運集裝箱試驗	Testing Shipping Containers in Revolving Hexagonal Drum
ASTM D 784-1999	電絕緣材料用橙色蟲膠和其他印度紫膠	Orange Shellac and Other Indian Lacs for Electrical Insulation
ASTM D 785-1998	塑料和電絕緣材料洛氏硬度的試驗方法	Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials
ASTM D 787-1996	乙基纖維模制和擠壓化合物	Ethyl Cellulose Molding and Extrusion Compounds
ASTM D 788-1996	甲基丙烯酸酯模制和擠壓化合物的分類系統	Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds
ASTM D 789-1998	測定聚酰胺的相對粘度、融點和含濕量的試驗方法	Test Methods for Determination of Relative Viscosity, Melting Point and Moisture Content of Polyamide (PA)
ASTM D 79-1986	氧化鋅顏料	Zinc Oxide Pigments
ASTM D 790-1999	未增強和增強塑料及電絕緣材料撓曲性能的試驗方法	Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
ASTM D 790M-1993	未增強和增強塑料及電絕緣材料的撓曲性的測試方法	Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials (Metric)
ASTM D 792-1998	用位移法測定塑料密度和比重(相關密度)的標準試驗方法	Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
ASTM D 799-1974	液體香皂	Liquid Toilet Soap
ASTM D 8-1997	與道路和路面材料相關的術語	Terminology Relating to Materials for Roads and Pavements
ASTM D 800-1991	工業用金屬除垢劑化學分析試驗方法	Test Methods of Chemical Analysis of Industrial Metal Cleaning Compositions
ASTM D 801-1997	二聚戊烯抽樣和測試的試驗方法	Test Methods for Sampling and Testing Dipentene
ASTM D 802-1997	松油抽樣和測試的試驗方法	Test Methods for Sampling and Testing Pine Oils
ASTM D 803-1997	妥爾油的測試試驗方法	Test Methods for Testing Tall Oil
ASTM D 804-1997	包括妥爾油及相關產品的松脂制品的有關術語	Terminology Relating to Naval Stores, Including Tall Oil and Related Products
ASTM D 806-2000	摻土水泥混合物中水泥含量的標準試驗方法	Standard Test Method for Cement Content of Soil-Cement Mixtures
ASTM D 807-2000	評價工業鍋爐用水引起脆裂傾向的標準實施規程(美國礦業局的脆變檢查器方法)	Standard Practice for Assessing the Tendency of Industrial Boiler Waters to Cause Embrittlement (USBM Embrittlement Detector Method)
ASTM D 808-2000	新的和使用過的石油產品中氯含量的標準試驗方法(氧彈法)	Standard Test Method for Chlorine in New and Used Petroleum Products (Bomb Method)
ASTM D 81-1987	堿性碳酸鹽鉛白顏料	Basic Carbonate White Lead Pigment
ASTM D 813-1995	測定橡膠龜裂擴展的試驗方法	Test Method for Rubber Deterioration - Crack Growth
ASTM D 814-1995	橡膠特性揮發性液體蒸汽滲透性的試驗方法	Test Method for Rubber Property - Vapor Transmission of Volatile Liquids
ASTM D 816-1982	橡膠膠水的試驗方法	Test Methods for Rubber Cements
ASTM D 817-1996	乙酸丙酸纖維素和醋酸丁酸纖維素的試驗方法	Test Methods of Testing Cellulose Acetate Propionate and Cellulose Acetate Butyrate
ASTM D 820-1993	含合成洗滌劑肥皂的化學分析試驗方法	Test Methods for Chemical Analysis of Soaps Containing Synthetic Detergents
ASTM D 822-2001	用經過過濾的明光碳弧曝光裝置測定涂料及相關涂層的標準實施規程	Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings
ASTM D 823-1995	色漆,清漆,噴漆及有關產品制成厚度均勻漆膜試片的方法	Producing Films of Uniform Thickness of Paint, Varnish and Related Products on Test Panels
ASTM D 824-1994	用皺文紙測定吸水率的測試方法	Test Method for Rate of Absorption of Water by Bibulous Papers
ASTM D 828-1997	紙和紙板抗扯裂強度的試驗方法	Test Method for Tensile Breaking Strength of Paper and Paperboard
ASTM D 829-1997	紙和紙制品濕抗扯裂強度的標準試驗方法	Standard Test Methods for Wet Tensile Breaking Strength of Paper and Paper Products
ASTM D 83-1984	鉛丹顏料	Red Lead Pigment
ASTM D 831-1994	電纜及電容器油的氣體含量的測試方法	Test Method for Gas Content of Cable and Capacitor Oils
ASTM D 832-1992	低溫狀態下的橡膠試驗	Rubber Conditioning for Low-Temperature Testing
ASTM D 835-1995	苯-485的提煉	Refined Benzene- 485
ASTM D 841-2002	硝化級甲苯標準規范	Standard Specification for Nitration Grade Toluene
ASTM D 843-1997	硝化級二甲苯	Nitration Grade Xylene
ASTM D 847-1996	苯,甲苯,二甲苯,溶劑石腦油和類似的工業芳烴酸度的試驗方法	Test Method for Acidity of Benzene, Toluene, Xylenes, Solvent Naphthas and Similar Industrial Aromatic Hydrocarbons
ASTM D 848-1997	工業芳烴的酸洗消色標準試驗方法	Standard Test Method for Acid Wash Color of Industrial Aromatic Hydrocarbons
ASTM D 849-2002	用工業芳烴測試銅帶腐蝕性的標準試驗方法	Standard Test Method for Copper Strip Corrosion by Industrial Aromatic Hydrocarbons
ASTM D 850-1999	工業芳輕及相關物質的蒸溜試驗方法	Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials
ASTM D 852-2000	苯凝固點的標準試驗方法	Standard Test Method for Solidification Point of Benzene
ASTM D 853-1997	工業用芳烴中硫化氫和二氧化硫含量(粗略的)的標準試驗方法	Standard Test Method for Hydrogen Sulfide and Sulfur Dioxide Content (Qualitative) of Industrial Aromatic Hydrocarbons
ASTM D 854-2000	通過水比重瓶測定土壤固體比重的標準試驗方法	Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
ASTM D 857-1995	水中鋁含量的測試方法	Test Methods for Aluminum in Water
ASTM D 858-1995	水中錳含量的試驗方法	Test Methods for Manganese in Water
ASTM D 859-2000	水中二氧化硅的標準試驗方法	Standard Test Method for Silica in Water
ASTM D 86-2001	大氣壓下石油產品蒸餾的標準試驗方法	Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
ASTM D 861-1995	用特克斯制命名纖維,紗的半制品,紗和其它紡織品線度	Use of the Tex System to Designate Linear Density of Fibers, Yarn Intermediates and Yarns
ASTM D 865-1999	橡膠的空氣中加熱變質試驗方法(試管封閉法)	Test Method for Rubber - Deterioration by Heating in Air (Test Tube Enclosure)
ASTM D 866-1999	電線及電纜用丁苯合成橡膠套	Styrene-Butadiene (SBR) Synthetic Rubber Jacket for Wire and Cable
ASTM D 868-1985	路標漆滲色程度評價的試驗方法	Test Method for Evaluating Degree of Bleeding of Traffic Paint
ASTM D 869-1985	涂漆沉降程度評價試驗方法	Test Method for Evaluating Degree of Settling of Paint
ASTM D 87-1987	石蠟熔點的試驗方法(冷卻曲線)	Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM D 870-1997	水浸漬法測試涂層的耐水性能	Testing Water Resistance of Coatings Using Water Immersion
ASTM D 871-1996	測試乙酸纖維素的試驗方法	Test Methods of Testing Cellulose Acetate
ASTM D 873-1999	航空燃料氧化穩定性的測試方法	Test Method for Oxidation Stability of Aviation Fuels (Potential Residue Method)
ASTM D 874-2000	潤滑油和添加劑中硫酸鹽類灰分的標準測試方法	Standard Test Method for Sulfated Ash from Lubricating Oils and Additives
ASTM D 876-2000	電絕緣用非硬質聚氯乙烯管的標準試驗方法	Standard Test Methods for Nonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation
ASTM D 877-1987	用圓盤電極測定電絕緣液體介電擊穿電壓的試驗方法	Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes
ASTM D 878-2001	絕緣油中無機氯化物和硫酸鹽的標準試驗方法	Standard Test Method for Inorganic Chlorides and Sulfates in Insulating Oils
ASTM D 88-1994	賽波特粘度的試驗方法	Test Method for Saybolt Viscosity
ASTM D 880-1992	船用集裝箱的沖擊試驗的試驗方法	Test Method for Impact Testing for Shipping Containers and Systems
ASTM D 882-2001	塑料薄板材抗拉特性的標準試驗方法	Standard Test Method for Tensile Properties of Thin Plastic Sheeting
ASTM D 883-1996	塑料相關術語	Terminology Relating to Plastics
ASTM D 885-1998	人造有機纖維制輪胎簾子線、輪胎簾布和工業長紗線的試驗	Testing Tire Cords, Tire Cord Fabrics and Industrial Filament Yarns Made from Man-Made Organic-Base Fibers
ASTM D 887-1982	水沉積物抽樣	Sampling Water-Formed Deposits
ASTM D 888-1992	水中溶解氧的試驗方法	Test Methods for Dissolved Oxygen in Water
ASTM D 889-1999	松香中揮發性油的試驗方法	Test Method for Volatile Oil in Rosin
ASTM D 890-1998	液體松脂中水含量的試驗方法	Test Method for Water in Liquid Naval Stores
ASTM D 891-1995	液態工業化合物的比重,表觀比重的測試方法	Test Methods for Specific Gravity, Apparent, of Liquid Industrial Chemicals
ASTM D 892-2002	潤滑油起泡特性的標準試驗方法	Standard Test Method for Foaming Characteristics of Lubricating Oils
ASTM D 893-1997	用過的潤滑油中不溶物的試驗方法	Test Method for Insolubles in Used Lubricating Oils
ASTM D 895-1994	包裝箱的水蒸氣滲透性的測試方法	Test Method for Water Vapor Permeability of Packages
ASTM D 896-1997	膠粘劑耐化學試劑的試驗方法	Test Method for Resistance of Adhesive Bonds to Chemical Reagents
ASTM D 897-2001	膠粘劑粘結力的抗拉性的標準試驗方法	Standard Test Method for Tensile Properties of Adhesive Bonds
ASTM D 898-1996	膠粘劑固體單位面積涂用重量的試驗方法	Test Method for Applied Weight per Unit Area of Dried Adhesive Solids
ASTM D 899-2000	單位面積涂用液體膠粘劑重量的標準試驗方法	Standard Test Method for Applied Weight Per Unit Area of Liquid Adhesive
ASTM D 9-1987	與木材相關的術語	Terminology Relating to Wood

[1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] [24] [25] [26] [27] [28] [29] [30] [31] [32] [33] [34] [35] [36] [37] [38] [39] [40] [41] [42] [43] [44] [45] [46] [47] [48] [49] [50] [51] [52] [53] [54] [55] [56] [57] [58] [59] [60] [61] [62] [63] [64] [65] [66] [67] [68] [69] [70] [71] [72] [73] [74] [75] [76] [77] [78] [79] [80] [81] [82] [83] [84] [85]

寬天下翻譯公司版權所有 2008