ASTM——美國材料與實驗協會標準翻譯目錄查詢

咨詢熱線：010-6973-5438

標準號	中文名稱	英文名稱
ANSI/ASTM D2564-2004	聚氯乙烯塑料管道系統用液狀粘固劑規范
ANSI/ASTM D2582-2003	塑料薄膜和薄板的耐破洞撕裂擴散的試驗方法(08.02)	(Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting (08.02) )
ANSI/ASTM D2609-2002	聚乙烯塑料管用的塑料插入管配件規范	(Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe )
ANSI/ASTM D2622-2003	石油產品中硫的試驗方法(X射線光譜法)	(Test Method for Sulfur in Petroleum Products (X-Ray Spectrographic Method) (05.02) )
ANSI/ASTM D2624-2002	含靜態耗散器添加劑的航空餾出油的電導率的試驗方法(05.02)	(Test Method for Electrical Conductivity of Aviation and Distillate Fuels Containing a Static Dissipator Additive (05.02) )
ANSI/ASTM D2633-2002	電線和電纜用熱塑性絕緣體和護套的測試方法	(Methods of Testing Thermoplastic Insulations and Jackets for Wire and Cable )
ANSI/ASTM D2657-2003	聚烯烴管和配件的熱接合實施規范	(Practice for Heat Joining of Polyolefin Pipe and Fittings )
ANSI/ASTM D2661-2002	丙烯腈-丁二烯-苯乙烯共聚物(ABS)塑料排水管、污水管和通風管和配件的規范.表40	(Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings )
ANSI/ASTM D2665-2002	聚氯乙烯(PVC)塑料排水管、污水管和通風管及配件的規范	(Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings )
ANSI/ASTM D2683-2004	限定外徑的聚乙烯管用套節型聚乙烯配件規范
ANSI/ASTM D2699-2003	用研究法測定發動機燃料爆燃特性的試驗(05.04)	(Motor Fuels by the Research Method, Test for Knock Characteristics of (05.04) )
ANSI/ASTM D2699-2004	用研究法測定機動車燃料的抗爆特性
ANSI/ASTM D2699a-2004	火花點燃式發動機燃料的辛烷值研究的試驗方法
ANSI/ASTM D2700-2004	火花點火發動機燃料的發動機辛烷值的試驗方法
ANSI/ASTM D2700-2004	火花點火發動機燃料的發動機辛烷值的試驗方法	(Test Method for Motor Octane Number of Spark-ignition Engine Fuel )
ANSI/ASTM D2700b-2004	火花點燃式發動機燃料的發動機辛烷值的試驗方法
ANSI/ASTM D2729-2003	聚氯乙烯(PVC)污水管及配件規范	(Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings )
ANSI/ASTM D2737-2003	聚乙烯塑料管規范	(Specification for Polyethylene (PE) Plastic Tubing )
ANSI/ASTM D2749-2002	塑料管配件的尺寸表示符號	(Symbols for Dimensions of Plastic Pipe Fittings )
ANSI/ASTM D2756-2002	電絕緣清漆重量損失的測試方法	(Test Method for Weight Loss of Electrical Insulating Varnishes )
ANSI/ASTM D2782-2002	潤滑液耐特壓特性的測量方法(泰姆肯試驗方法)(05.02)	(Measurement of Extreme-Pressure Properties of Lubricating Fluids (Timken Method), Method for (05.02) )
ANSI/ASTM D2783-2003	潤滑液極壓特性測量的試驗方法(四球法)	(Test Method for Measurement of Extreme-pressure Properties of Lubricating Fluids Four-ball Method )
ANSI/ASTM D2837-2004	獲得熱塑性管道材料靜水壓設計基數的試驗方法
ANSI/ASTM D2859-2002	加工的織物地板覆蓋物材料的燃燒特性試驗方法	(Test Method for Ignition Characteristics of Finished Textile Floor Covering Materials )
ANSI/ASTM D2859-2004	精制紡織地板覆蓋物著火特性試驗方法
ANSI/ASTM D2880-2003	燃?xì)廨啓C(jī)燃料油規范(05.02)	(Gas Turbine Fuel Oils, Specification for (05.02) )
ANSI/ASTM D2881-2003	金屬加工液和相關材料的分類(05.02)	(Classification of Metal Working Fluids and Related Materials )
ANSI/ASTM D2885-2003	使用在線分析儀測定辛烷值的研究法和馬達法(05.04)	(Research and Motor Method Octane Ratings Using On-Line Analyzers, Test Method for (05.04) )
ANSI/ASTM D2887-2004	用氣相色譜法測定石油餾分沸騰范圍分布的試驗方法	(Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography )
ANSI/ASTM D2887b-2004	氣相色譜法測定石油餾份的沸騰范圍分布的試驗方法
ANSI/ASTM D2892-2004	原油的蒸餾方法(15理論板柱)(05.02)
ANSI/ASTM D2892-2004	原油的蒸餾方法(15理論板柱)(05.02)	(Distillation of Crude Petroleum (15 Theoretical Plate Column), Method for (05.02) )
ANSI/ASTM D2893-2003	極壓潤滑油氧化特性的試驗方法	(Test Method for Oxidation Characteristics of Extreme Pressure Lubricating Oils )
ANSI/ASTM D2893-2004	超高壓潤滑油的氧化特性的試驗方法
ANSI/ASTM D2896-2004	用電勢高氯酸滴定法測定石油產品總堿值的試驗方法(05.02)
ANSI/ASTM D2896-2004	用電勢高氯酸滴定法測定石油產品總堿值的試驗方法(05.02)	(Total Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration, Test Method for (05.02) )
ANSI/ASTM D2903-2003	電絕緣用交鏈氯化聚烯烴熱縮管規范	(Specification for Crosslinked Chlorinated Polyolefin Heat-Shrinkable Tubing for Electrical Insulation )
ANSI/ASTM D2972-2003	水中砷測定方法	(Test Methods for Arsenic in Water )
ANSI/ASTM D2983-2004	用Brookfield粘度計測定機動車試驗液體潤滑劑的低溫粘度的試驗方法
ANSI/ASTM D2983a-2002	用布魯克非爾德度粘度計測量機動車液體潤滑劑低溫粘度的試驗方法	(Low-Temperature Viscosity of Automotive Test Fluid Lubricants Measured by Brookfield Viscometer, Method of Test for (05.02) )
ANSI/ASTM D2989-2002	鹵化有機溶劑及其添加劑的酸堿性的試驗方法	(Test Method for Acidity-Alkalinity of Halogenated Organic Solvents and their Admixtures )
ANSI/ASTM D3004-2002	擠壓熱固和熱塑性半導體和絕緣護套規范(10.02)	(Specification for Extruded Thermosetting and Thermoplastic Semi-Conducting Conductor and Insulation Shields (10.02) )
ANSI/ASTM D3016-2003	液體排組色譜法術語和關聯的使用的實施規程	(Practice for Use of Liquid Exclusion Chromatography Terms and Relationships )
ANSI/ASTM D3032-2003	連接線絕緣的試驗方法(10.02)	(Hookup Wire Insulation, Test Method for (10.02) )
ANSI/ASTM D3032-2004	連接線絕緣的試驗方法
ANSI/ASTM D3034-2004	PSM 型聚氯乙烯排水管材和管件的規范
ANSI/ASTM D3035-2003	以受控外徑為基準的聚乙烯塑料管(SPR-PR)規范	(Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter )
ANSI/ASTM D3082-2003	水中硼的試驗方法	(Test Method for Boron In Water )
ANSI/ASTM D3117-2002	餾出燃料的蠟的外觀點的試驗方法(05.02)	(Test Method for Wax Appearance Point of Distillate Fuels (05.02) )
ANSI/ASTM D3120a-2003	用氧化微庫侖分析法測定輕質液態石油烴類中硫的痕量的試驗方法	(Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry, Method of Test for (05.02) )
ANSI/ASTM D3138-2002	丙烯腈-丁二烯-苯乙烯共聚物管及配件和聚氯乙烯無壓管道系統構件之間轉換接頭用溶劑粘結劑規范	(Specification for Solvent Cements for Transition Joints between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components )
ANSI/ASTM D3138-2004	丙烯腈-丁二烯-苯乙烯共聚物和聚氯乙烯無壓管道系統構件之間轉換接頭用液狀粘固劑規范
ANSI/ASTM D3138-2004	丙烯腈-丁二烯-苯乙烯共聚物和聚氯乙烯無壓管道系統構件之間轉換接頭用液狀粘固劑規范
ANSI/ASTM D3223-2002	水中整體水銀試驗方法	(Test Method for Total Mercury in Water )
ANSI/ASTM D3227-2004	汽油、煤油、航空渦輪和餾出燃料中硫醇含量的試驗方法(電勢滴定法)
ANSI/ASTM D3228-2004	用改良的基耶達法測定潤滑油中總氮量的試驗方法(05.02)
ANSI/ASTM D3228-2004	用改良的基耶達法測定潤滑油中總氮量的試驗方法(05.02)	(Total Nitrogen in Lubricating Oils by Modified Kjeldahl Method, Method of Test for (05.02) )
ANSI/ASTM D3230-2005	電勢滴定法測定原油中鹽的試驗方法
ANSI/ASTM D3231-2002	測定汽油中磷的試驗方法(05.02)	(Phosphorus in Gasoline, Method of Test for (05.02) )
ANSI/ASTM D3235-2002	石蠟中溶劑萃取物,(05.02)的試驗方法	(Solvent Extractables in Petroleum Waxes, Method of Test for (05.02) )
ANSI/ASTM D3237-2002	用原子吸收光譜測定法測定汽油中鉛含量的試驗方法(05.02)	(Lead in Gasoline by Atomic Absorption Spectrometry, Method of Test for (05.02) )
ANSI/ASTM D3241-2004	測定航空渦輪燃料熱氧化穩定性的試驗方法(JFTOT程序)
ANSI/ASTM D3241-2005	測定航空渦輪機燃料熱氧化穩定性的試驗方法(JFTOT程序)
ANSI/ASTM D3241a-2002	航空燃?xì)鉁u輪機燃料熱氧化穩定性的試驗方法(JFTOT程序)	(Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure) (05.02) )
ANSI/ASTM D3245-2003	工業燃料油可泵性的試驗方法(05.02)	(Test Method for Pumpability of Industrial Fuel Oils (05.02) )
ANSI/ASTM D3251-2004	薄膜絕緣磁性金屬絲用電絕緣清漆的熱老化特性的試驗方法
ANSI/ASTM D3262-2003	增強塑料砂漿污水管規范	(Specification for Reinforced Plastic Mortar Sewer Pipe (08.04) )
ANSI/ASTM D3262-2004	增強塑料砂漿排污水管規范
ANSI/ASTM D3263-2003	除去水成沉積物用溶劑系統腐蝕性的試驗方法	(Test Methods for Corrosivity of Solvent Systems for Removing Water-Formed Deposits )
ANSI/ASTM D3288-2003	電磁線漆包用漆的試驗方法(10.02)	(Test Methods for Magnet-Wire Enamels (10.02) )
ANSI/ASTM D3294-2003	聚四氟乙烯樹脂模制薄板材和模制基礎型材規范	(Specification for Polytetrafluoroethylene (PTFE) Resin Molded Sheet and Molded Basic Shapes )
ANSI/ASTM D3338-2004	航空燃料的燃燒熱估算方法
ANSI/ASTM D3339-2002	用半微量彩色指示劑滴定法測定酸度總值的試驗方法(05.02)	(Total Acid Number by Semi-Micro Color Indicator Titration, Method of Test for (05.02) )
ANSI/ASTM D3353-2004	纖維絕緣磁性金屬線的試驗方法
ANSI/ASTM D3380-2003	塑料片基微波電路基片的相對透電率(介電常數)和耗散因數的試驗方法	(Test Method for Relative Permittivity (dielectric Constant) and Dissipation Factor of Plastic-based Microwave Circuit Substrates )
ANSI/ASTM D341-2004	粘度.液態石油產品的溫度圖
ANSI/ASTM D3427-2004	石油氣泡分離時間的試驗方法(05.02)
ANSI/ASTM D3427-2004	石油氣泡分離時間的試驗方法(05.02)	(Gas Bubble Separation Time of Petroleum Oils, Test Method for (05.02) )
ANSI/ASTM D3485-2002	預先裝配導線和電纜用可盤旋光滑壁聚乙烯導管規范	(Specification for Smooth-Wall Coilable Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable )
ANSI/ASTM D3517-2003	“纖維玻璃“(玻璃纖維增強熱固性樹脂)規范	(Specification for “Fiberglass“ (Glass-Fiber-Reinforced Thermosetting Resin)(08.04))
ANSI/ASTM D3517-2004	纖維玻璃(玻璃纖維增強熱固性樹脂)規范
ANSI/ASTM D3520-2004	熱處理液體淬火時間的試驗方法.磁性冷卻速度試驗器法
ANSI/ASTM D3527-2002	機動車輪軸承潤滑脂的壽命性能的試驗方法(05.02)	(Test Method for Life Performance of Automotive Wheel Bearing Greases )
ANSI/ASTM D3557-2002	水中鎘試驗方法	(Test Methods for Cadmium in Water )
ANSI/ASTM D3559-2003	水中鉛的試驗方法	(Test Methods for Lead in Water )
ANSI/ASTM D3561-2002	用離子吸收光譜法測試微咸水、海水和鹽水中的鋰、鉀和鈉離子的方法	(Test Method for Lithium, Potassium, and Sodium Ions in Brackish Water, Seawater, and Brines by Atomic Absorption Spectrophotometry )
ANSI/ASTM D3590-2002	水中克耶達(Kjeldahl)氮總含量的試驗方法	(Test Methods for Total Kjeldahl Nitrogen in Water )
ANSI/ASTM D3645-2003	水中鈹?shù)脑囼?yàn)方法	(Test Methods for Beryllium in Water )
ANSI/ASTM D3648-2003	放射性測量規程	(Practices for the Measurement of Radioactivity )
ANSI/ASTM D3651-2002	微咸水、海水和鹽水中的鋇離子的測試方法	(Test Method for Barium in Brackish Water, Seawater, and Brines )
ANSI/ASTM D3664-2004	電氣設備中電容器用雙軸取向的聚乙烯對苯二酸脂薄膜規范
ANSI/ASTM D3679-2003	硬質聚氯乙烯擋板規范	(Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding (08.04) )
ANSI/ASTM D3679-2004	硬質聚氯乙烯擋板規范
ANSI/ASTM D3699-2003	煤油規范(05.02)	(Specification for Kerosine )
ANSI/ASTM D3699-2005	煤油規范
ANSI/ASTM D3712-2005	用液相色譜法分析油溶性石油硫酸鹽的試驗方法
ANSI/ASTM D3753-2005	玻璃纖維增強聚酯檢查孔規范
ANSI/ASTM D3754-2003	纖維玻璃污水管和工業用壓力管規范(08.04)	(Specification for Fiberglass Sewer and Industrial Pressure Pipe (08.04) )
ANSI/ASTM D3754-2004	纖維玻璃污水管和工業用壓力管規范
ANSI/ASTM D381-2003	用射流蒸發法測定燃料中原在膠的試驗方法	(Existent Gum in Fuels by Jet Evaporation, Method of Test for (05.01) )
ANSI/ASTM D3828-2002	用Setaflash閉合試驗機測定閃點的試驗(05.02)	(Flash Point by Setaflash Closed Tester, Test for (05.02) )
ANSI/ASTM D3828-2005	用小型閉杯試驗器測定閃點的試驗方法
ANSI/ASTM D3829-2002	機油的邊界泵送溫度的預測試驗(05.02)	(Predicting the Borderline Pumping Temperature of Engine Oil, Test for (05.02) )
ANSI/ASTM D3839-2002	柔性增強熱固性樹脂管和增強塑料砂漿管的地下安裝慣例(08.04)	(Practice for Underground Installation of Flexible Reinforced Thermosetting Resin Pipe and Reinforced Plastic Mortar Pipe (08.04) )
ANSI/ASTM D3865-2002	水中钚的試驗方法	(Test Method for Plutonium in Water )
ANSI/ASTM D3866-2002	水中銀的試驗方法	(Test Methods for Silver in Water )
ANSI/ASTM D3867-2004	水中亞硝-亞硝測定方法
ANSI/ASTM D3868-2004	微咸水、海水和鹽水中氟離子的試驗方法
ANSI/ASTM D3869-2004	微咸水、海水和鹽水中碘化物和溴化物離子的試驗方法
ANSI/ASTM D3875-2003	微咸水、海水和鹽水中堿性的試驗方法	(Test Method for Alkalinity in Brackish Water, Seawater, and Brines )
ANSI/ASTM D3919-2004	用石墨爐原子吸收光譜法測量水中痕量素的實施規程
ANSI/ASTM D3948-2004	用便攜式分離計進行航空渦輪燃料脫水特性的現場試驗方法
ANSI/ASTM D3955-2004	電絕緣漆規范
ANSI/ASTM D396-2005	燃料油規范
ANSI/ASTM D396a-2002	燃料油規范	(Fuel Oils, Specification for (05.01) )
ANSI/ASTM D3972-2002	用放射化學法進行水中同位素鈾的試驗方法	(Test Method for Isotopic Uranium in Water by Radiochemistry )
ANSI/ASTM D3981-2003	通用和包裝用中密度聚乙烯薄膜規格	(Specification for Medium-density Polyethylene Films for General Use and Packaging Applications )
ANSI/ASTM D4000-2003	特殊用途塑料材料的分類系統(08.03)	(Classification System for Specifying Plastic Materials (08.03) )
ANSI/ASTM D4007a-2002	離心法測定原油中的水和沉積物(實驗室法)	(Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedures) (05.02) )
ANSI/ASTM D4045-2004	利用加氫分解作用和速率測定比色法測試石油產品中硫的含量

[1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] [24] [25] [26] [27] [28] [29] [30] [31] [32] [33] [34] [35] [36] [37] [38] [39] [40] [41] [42] [43] [44] [45] [46] [47] [48] [49] [50] [51] [52] [53] [54] [55] [56] [57] [58] [59] [60] [61] [62] [63] [64] [65] [66] [67] [68] [69] [70] [71] [72] [73] [74] [75] [76] [77] [78] [79] [80] [81] [82] [83] [84] [85]

寬天下翻譯公司版權所有 2008