標準號 |
中文名稱 |
英文名稱 |
| ASTM D 5232-1992 |
測定固體的,類似固體的,或液體廢棄物成分穩定性和可混合性的試驗方法 |
Test Method for Determining the Stability and Miscibility of a Solid, Semi-Solid or Liquid Waste Material |
| ASTM D 5233-1992 |
廢棄物單批量抽取法的試驗方法 |
Test Method for Single Batch Extraction Method for Wastes |
| ASTM D 5234-1992 |
乙烯制品的分析方法 |
Analysis of Ethylene Product |
| ASTM D 5235-1997 |
在木制品上覆層干膜厚度顯微鏡測量的標準試驗方法 |
Standard Test Method for Microscopical Measurement of Dry Film Thickness of Coatings on Wood Products |
| ASTM D 5236-2001 |
重?zé)N混合物的蒸餾標準試驗方法(真空蒸餾鍋法) |
Standard Test Method for Distillation of Heavy Hydrocarbon Mixtures (Vacuum Potstill Method) |
| ASTM D 5237-1992 |
纖維軟化劑的評定 |
Evaluating Fabric Softeners |
| ASTM D 5238-1998 |
測定棉絮潛在冒煙燃燒的標準試驗方法 |
Standard Test Method for Smoldering Combustion Potential of Cotton-Based Batting |
| ASTM D 5239-1998 |
穩定土壤用特定飛灰 |
Characterizing Fly Ash for Use in Soil Stabilization |
| ASTM D 524-2000 |
石油產品中蘭氏殘?zhí)康臉?biāo)準試驗方法 |
Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products |
| ASTM D 5240-1992 |
通過對硫酸鈉和硫酸錳組成的亂石堅固性計算檢測巖石厚板的試驗方法 |
Test Method for Testing Rock Slabs to Evaluate Soundness of Riprap by Use of Sodium Sulfate or Magnesium Sulfate |
| ASTM D 5241-1992 |
水中揮發的和類似揮發有機化合物分析用水的微量萃取法 |
Micro-Extraction of Water for the Analysis of Volatile and Semi-Volatile Organic Compounds in Water |
| ASTM D 5242-1992 |
有薄板堰水的明渠流量測量的試驗方法 |
Test Method for Open-Channel Flow Measurement of Water with Thin-Plate Weirs |
| ASTM D 5243-1992 |
在地下管道水的明渠流量測量的試驗方法 |
Test Method for Open-Channel Flow Measurement of Water Indirectly at Culverts |
| ASTM D 5244-1992 |
水中腸道病毒的復原 |
Recovery of Enteroviruses from Waters |
| ASTM D 5245-1992 |
微生物分析用清潔的實驗室玻璃器皿,塑料器皿和設備 |
Cleaning Laboratory Glassware, Plasticware and Equipment Used in Microbiological Analyses |
| ASTM D 5246-1992 |
水中綠膿桿菌的分離和計數的試驗方法 |
Test Method for Isolation and Enumeration of Pseudomonas Aeruginosa from Water |
| ASTM D 5247-1992 |
用規定微生物分析發測定好氧性生物降解能力的試驗方法 |
Test Method for Determining the Aerobic Biodegradability of Degradable Plastics by Specific Microorganisms |
| ASTM D 5248-1996 |
再生的1,1,2-三氯1,2,2-三氟乙烷 |
Reclaimed 1,1,2-Trichloro 1,2,2-Trifluoroethane |
| ASTM D 5249-1995 |
硅酸鹽水泥混凝土和地瀝青接頭加熱和制冷接縫密封膠襯墊材料 |
Backer Material for Use with Cold- and Hot-Applied Joint Sealants in Portland-Cement Concrete and Asphalt Joints |
| ASTM D 525-2001 |
汽油氧化穩定性的標準試驗方法(誘導期方法) |
Standard Test Method for Oxidation Stability of Gasoline (Induction Period Method) |
| ASTM D 5250-2000 |
醫用聚氯乙烯手套的標準規范 |
Standard Specification for Poly(vinyl chloride) Gloves for Medical Application |
| ASTM D 5251-1998 |
四撐點式地氈踩踏滾筒試驗儀的操作 |
Operation of the Tetrapod Walker Drum Tester |
| ASTM D 5252-1998 |
六撐點式地氈踩踏滾筒試驗儀的操作 |
Operation of the Hexapod Drum Tester |
| ASTM D 5253-1996 |
鋪地織物和家具裝飾布用的書寫管理指令和一般刷新程序術語 |
Terminology of Writing Care Instructions and General Refurbishing Procedures for Textile Floor Coverings and Textile Upholstered Furniture |
| ASTM D 5254-1992 |
識別地下水位用數據的最低設施 |
Minimum Set of Data Elements to Identify a Ground-Water Site |
| ASTM D 5255-2001 |
土壤和巖石檢驗人員認可的標準實施規程 |
Standard Practice for Certification of Personnel Engaged in the Testing of Soil and Rock |
| ASTM D 5256-2000 |
溶于水形成的沉淀物的動態溶劑體系相關功效的標準試驗方法 |
Standard Test Method for Relative Efficacy of Dynamic Solvent Systems for Dissolving Water-Formed Deposits |
| ASTM D 5257-1997 |
用離子色譜法測定水中可溶六價鉻的試驗方法 |
Test Method for Dissolved Hexavalent Chromium in Water by Ion Chromatography |
| ASTM D 5258-1992 |
使用封閉式微波爐加熱從沉淀物中得到素的酸萃取物 |
Acid-Extraction of Elements from Sediments Using Closed Vessel Microwave Heating |
| ASTM D 5259-1992 |
用薄膜篩選程序?qū)λ心c道球菌隔離和查點的試驗方法 |
Test Method for Isolation and Enumeration of Enterococci from Water by the Membrane Filter Procedure |
| ASTM D 5260-1997 |
聚氯乙烯均聚物,聚氯乙烯化合物及氯化聚氯乙烯化合物耐化學性的分類 |
Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds |
| ASTM D 5261-1992 |
測量單位面積土工織物所通過的物質量 |
Test Method for Measuring Mass per Unit Area of Geotextiles |
| ASTM D 5262-1997 |
評定土工合成織物非拉伸蠕變作用試驗方法 |
Test Method for Evaluating the Unconfined Tension Creep Behavior of Geosynthetics |
| ASTM D 5263-1993 |
堿萃取時煙煤中氧化過程相對等級測量的測試方法 |
Test Method for Determining the Relative Degree of Oxidation in Bituminous Coal by Alkali Extraction |
| ASTM D 5264-1998 |
用蘇瑟蘭德-板印試驗機對印刷材料抗磨性的試驗方法 |
Test Method for Abrasion Resistance of Printed Materials by the Sutherland Rub Tester |
| ASTM D 5265-1992 |
橋沖擊試驗的試驗方法 |
Test Method for Bridge Impact Testing |
| ASTM D 5266-1999 |
膠粘連接時對木材破壞百分率的估算 |
Estimating the Percentage of Wood Failure in Adhesive Bonded Joints |
| ASTM D 5267-1997 |
測定管式膠粘劑可擠出性的試驗方法 |
Test Method for Determination of Extrudability of Cartridge Adhesives |
| ASTM D 5268-1992 |
園林設計用耕作層土 |
Topsoil Used for Landscaping Purposes |
| ASTM D 5269-1996 |
用泰斯復原法測定非越流性封閉含水層透射率的標準試驗方法 |
Standard Test Method for Determining Transmissivity of Nonleaky Confined Aquifers by the Theis Recovery Method |
| ASTM D 5270-1996 |
測定有限的,非越流性,封閉含水層透射率和蓄水系數的試驗方法 |
Test Method for Determining Transmissivity and Storage Coefficient of Bounded, Nonleaky, Confined Aquifers |
| ASTM D 5271-1993 |
活性污泥-污水處理成套裝置中測定塑料材料需氧生物降解作用試驗方法 |
Test Method for Determining the Aerobic Biodegradation of Plastic Materials in an Activated-Sludge-Wastewater-Treatment System |
| ASTM D 5272-1992 |
可光降解塑料制品的室外曝光檢驗 |
Outdoor Exposure Testing of Photodegradable Plastics |
| ASTM D 5273-1992 |
丙烯提濃物的分析 |
Analysis of Propylene Concentrates |
| ASTM D 5274-1992 |
1,3-丁二烯制品的分析 |
Analysis of 1,3-Butadiene Product |
| ASTM D 5275-1992 |
含流體的聚合物燃料噴射器剪切穩固性檢測的試驗方法 |
Test Method for Fuel Injector Shear Stability Test (FISST) for Polymer Containing Fluids |
| ASTM D 5276-1998 |
自由下落情況下滿載的集裝箱作落體試驗的測試方法 |
Test Method for Drop Test of Loaded Containers by Free Fall |
| ASTM D 5277-1992 |
使用傾斜材料沖擊試驗機運行程序設計水平?jīng)_擊試驗方法 |
Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester |
| ASTM D 5278-1992 |
窄幅織物深長的試驗方法(靜態負載試驗) |
Test Method for Elongation of Narrow Elastic Fabrics (Static-Load Testing) |
| ASTM D 5279-1999 |
用扭矩對塑料動態力學性能測量的試驗方法 |
Test Method for Measuring the Dynamic Mechanical Properties of Plastics in Torsion |
| ASTM D 528-1997 |
紙和紙板機器定向的試驗方法 |
Test Method for Machine Direction of Paper and Paperboard |
| ASTM D 5280-1996 |
帶線性校準功能的空氣質量測量方法的操作特性評定 |
Evaluation of Performance Characteristics of Air Quality Measurement Methods with Linear Calibration Functions |
| ASTM D 5281-1998 |
在周圍環境中,工作地點或室內環境中六價氯采集和分析的試驗方法 |
Test Method for Collection and Analysis of Hexavalent Chromium in Ambient, Workplace or Indoor Atmospheres |
| ASTM D 5282-1998 |
電絕緣用硅氧烷液體施工材料兼容性的試驗方法 |
Test Methods for Compatibility of Construction Material with Silicone Fluid Used for Electrical Insulation |
| ASTM D 5283-1992 |
有關廢物管理工作的環境數據的生產:質量保證和質量控制計劃及設備 |
Generation of Environmental Data Related to Waste Management Activities: Quality Assurance and Quality Control Planning and Implementation |
| ASTM D 5284-1993 |
帶酸性萃取液的廢棄物順序批量萃取的測試方法 |
Test Method for Sequential Batch Extraction of Waste with Acidic Extraction Fluid |
| ASTM D 5285-1992 |
使用土壤和沉淀物法對揮發有機吸附物24小時批量測量的試驗方法 |
Test Method for 24-Hour Batch-Type Measurement of Volatile Organic Sorption by Soils and Sediments |
| ASTM D 5286-2001 |
在一般生產條件下,涂料噴涂傳送效率測定的標準試驗方法 |
Standard Test Methods for Determination of Transfer Efficiency Under General Production Conditions for Spray Application of Paints |
| ASTM D 5287-1997 |
氣體燃料的自動抽樣 |
Automatic Sampling of Gaseous Fuels |
| ASTM D 5288-1997 |
使用多電極材料測定電絕緣材料追蹤攝影系數的試驗方法 |
Test Method for Determining the Tracking Index of Electrical Insulating Materials Using Various Electrode Materials (Excluding Platinum) |
| ASTM D 5289-1995 |
橡膠特性的測試方法.利用無旋轉硫化測量?jī)x測量橡膠的硬化 |
Test Method for Rubber Property - Vulcanization Using Rotorless Cure Meters |
| ASTM D 529-2000 |
瀝青材料的封閉碳弧暴露試驗的標準實施規范 |
Standard Practice for Enclosed Carbon-Arc Exposures of Bituminous Materials |
| ASTM D 5291-2001 |
石油產品及潤滑劑中碳、氫及氮儀器測量的標準試驗方法 |
Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants |
| ASTM D 5292-1999 |
用高裂度核磁共振光譜法測定烴類油中芳香碳含量的試驗方法 |
Test Method for Aromatic Carbon Contents of Hydrocarbon Oils by High Resolution Nuclear Magnetic Resonance Spectroscopy |
| ASTM D 5293-1999 |
用冷起動模擬裝置在-5℃和-30℃之間測量發動機油表面粘度的試驗方法 |
Test Method for Apparent Viscosity of Engine Oils Between -5 and -30 Degrees Celsius Using the Cold-Cranking Simulator |
| ASTM D 5295-1992 |
用水密材料粘結薄膜制備混凝土表面 |
Preparation of Concrete Surfaces for Adhered (Bonded) Membrane Waterproofing Systems |
| ASTM D 5296-1997 |
用高性能液相(涂膠水除外)色譜法測定聚苯乙烯分子平均重量和分子重量分配的試驗方法 |
Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography |
| ASTM D 5297-1995 |
用高性能液相色譜法對亞磺酰胺加速劑純度的測試方法 |
Test Method for Sulfenamide Accelerator-Purity by High Performance Liquid Chromatography |
| ASTM D 5298-1994 |
用過濾器紙對土壤潛能(吸收)測量的測試方法 |
Test Method for Measurement of Soil Potential (Suction) Using Filter Paper |
| ASTM D 5299-1999 |
測定環境放射性物質用地下水井,上層滯水帶監測裝置,地上鑿穿孔及其他設備的交付使用的標準指南 |
Standard Guide for Decommissioning of Ground Water Wells, Vadose Zone Monitoring Devices, Boreholes, and Other Devices for Environmental Activities |
| ASTM D 5300-1993 |
用聯合機械和超聲波法測量聚合物點陣熱固性預浸漬樹脂含量及其他有關性能的試驗方法 |
Test Method for Measurement of Resin Content and Other Related Properties of Polymer Matrix Thermoset Prepreg by Combined Mechanical and Ultrasonic Methods |
| ASTM D 5301-1992 |
涂料刷的物理特性 |
Physical Characterization of Paint Brushes |
| ASTM D 5302-2000 |
在低溫輕型條件下操作的用汽油作燃料的火花點火內燃機中為防止形成沉積物和耗損用的汽車發動機油評定的標準試驗方法 |
Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation and Wear in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions |
| ASTM D 5302a-2001 |
低溫輕型條件下工作的用汽油作燃料的火花點火內燃機中為防止形成沉積物和防磨損用汽車發動機油評定的標準試驗方法 |
Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation and Wear in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions |
| ASTM D 5303-1992 |
氣相色譜法丙烯中微量硫化碳的試驗方法 |
Test Method for Trace Carbonyl Sulfide in Propylene by Gas Chromatography |
| ASTM D 5304-2000 |
氧超壓條件下評定蒸餾燃料儲存耐久性的標準試驗方法 |
Standard Test Method for Assessing Distillate Fuel Storage Stability by Oxygen Overpressure |
| ASTM D 5305-1997 |
測定液化石油氣蒸氣中乙硫醇的試驗方法 |
Test Method for Determination of Ethyl Mercaptan in LP-Gas Vapor |
| ASTM D 5306-1992 |
潤滑油和液壓液線性火焰?zhèn)鞑ニ俣鹊臏y(cè)試方法 |
Test Method for Linear Flame Propagation Rate of Lubricating Oils and Hydraulic Fluids |
| ASTM D 5307-1997 |
氣相色譜法測定原油沸程分布的試驗方法 |
Test Method for Determination of Boiling Range Distribution of Crude Petroleum by Gas Chromatography |
| ASTM D 5308-1992 |
自動的及類似的能量吸收設備用半撓性微孔尿脘(氨基甲酸乙酯) |
Test Methods for Semi-Flexible Cellular Urethanes for Automotive and Similar Energy Absorption Applications |
| ASTM D 5309-1997 |
環己烷999 |
Cyclohexane 999 |
| ASTM D 531-1989 |
普西和瓊斯橡膠壓縮試驗方法 |
Test Method for Rubber Property - Pusey and Jones Indentation |
| ASTM D 5310-2000 |
用毛細管氣體色譜測定焦油酸成份的標準試驗方法 |
Standard Test Method for Tar Acid Composition by Capillary Gas Chromatography |
| ASTM D 5311-1992 |
土壤的負荷控制三向疲勞強度的測試方法 |
Test Method for Load Controlled Cyclic Triaxial Strength of Soil |
| ASTM D 5312-1992 |
評定在凍結和解凍條件下侵蝕控制用巖石耐久性的試驗方法 |
Test Method for Evaluation of Durability of Rock for Erosion Control Under Freezing and Thawing Conditions |
| ASTM D 5313-1992 |
評定在浸濕和干燥條件下侵蝕控制用巖石耐久性的試驗方法 |
Test Method for Evaluation of Durability of Rock for Erosion Control Under Wetting and Drying Conditions |
| ASTM D 5314-1992 |
滲流層中土壤氣體監測 |
Soil Gas Monitoring in the Vadose Zone |
| ASTM D 5315-1992 |
用伴有支柱衍生作用的直接注水高壓液相色譜法(HPLC)法測定水中N-甲基-氨基甲酰肟和N-氨基甲酸甲酯的試驗方法 |
Test Method for N-Methyl-Carbamoyloximes and N-Methylcarbamates in Water by Direct Aqueous Injection HPLC with Post-Column Derivatization |
| ASTM D 5316-1998 |
用微量萃取和氣相色譜法測定水中1,2-二溴乙烷及1,2-二溴-3-氯丙烷的試驗方法 |
Test Method for 1,2-Dibromoethane and 1,2-Dibromo-3-Chloropropane in Water by Microextraction and Gas Chromatography |
| ASTM D 5317-1998 |
通過伴有電子俘獲檢測器的氣相色譜法測定水中氯化有機酸成分的試驗方法 |
Test Method for Determination of Chlorinated Organic Acid Compounds in Water by Gas Chromatography with an Electron Capture Detector |
| ASTM D 5318-1997 |
過氧化酯和過氧碳酸氫鈉中可水解氯化物的測試方法 |
Test Method for Hydrolyzable Chloride in Peroxy Esters and Peroxy Dicarbonates |
| ASTM D 5319-1997 |
玻璃纖維增強聚酯墻和頂棚鑲板 |
Glass-Fiber Reinforced Polyester Wall and Ceiling Panels |
| ASTM D 532-1990 |
電線及電纜用天然橡膠套管規格 |
Natural Rubber Jacket for Wire and Cable |
| ASTM D 5320-1996 |
測定穩定的三氯乙烯和四氯乙烯中1,1,1-三氯乙烷及二氯甲烷含量的試驗方法 |
Test Methods for Determination of 1,1,1-Trichloroethane and Methylene Chloride Content in Stabilized Trichloroethylene and Tetrachloroethylene |
| ASTM D 5321-1992 |
用直接剪力法測定土壤與土工合成物或土工合成物之間摩擦系數的試驗方法 |
Test Method for Determining the Coefficient of Soil and Geosynthetic or Geosynthetic and Ceosynthetic Friction by the Direct Shear Method |
| ASTM D 5322-1998 |
評價土工合成織物耐液體化學侵蝕性用的浸入程序 |
Immersion Procedures for Evaluating the Chemical Resistance of Geosynthetics to Liquids |
| ASTM D 5324-1998 |
含水建筑涂料試驗 |
Testing Water-Borne Architectural Coatings |
| ASTM D 5325-1992 |
測定水生氣溶膠涂料揮發物含量的重量百分比的試驗方法 |
Test Method for Determination of Weight Percent Volatile Content of Water-Borne Aerosol Paints |
| ASTM D 5326-1994 |
染色膠乳涂料中顏色顯現的試驗方法 |
Test Method for Color Development in Tinted Latex Paints |
| ASTM D 5327-1997 |
在一般實驗室條件下評定和比較傳輸效率 |
Evaluating and Comparing Transfer Efficiency Under General Laboratory Conditions |
| ASTM D 5328-1992 |
40℃時非加熱定印糊狀印刷油墨系統中揮發性有機化合物(VOC40)含量的測試方法 |
Test Method for Volatile Organic Compound (VOC40) Content of Non-Heatset Paste Printing Ink Systems at 40 degrees C |
| ASTM D 5329-1996 |
瀝青及硅酸鹽水泥混凝土路面上接縫與裂紋用熱鋪密封料和填充料的試驗方法 |
Test Methods for Sealants and Fillers, Hot-Applied for Joints and Cracks in Asphaltic and Portland Cement Concrete Pavements |
| ASTM D 533-1969 |
組合皂粉規格 |
Built Soap, Powdered |
| ASTM D 5330/D 5330M-1993 |
增強纖維壓敏材料制包裝用帶材 |
Tape, Pressure-Sensitive, Packaging, Filament-Reinforced |
| ASTM D 5331-1998 |
以伸展包覆性材料為安全保證的機械搬運評價用試驗方法 |
Test Method for Evaluation of Mechanical Handling of Unitized Loads Secured with Stretch Wrap Materials |
| ASTM D 5333-1992 |
測量土壤塌陷趨勢的試驗方法 |
Test Method for Measurement of Collapse Potential of Soils |
| ASTM D 5334-1992 |
用熱針探頭法測定土壤和軟石導熱性的試驗方法 |
Test Method for Determination of Thermal Conductivity of Soil and Soft Rock by Thermal Needle Probe Procedure |
| ASTM D 5335-1999 |
用粘結的電阻應變儀測定巖石熱膨脹線性系數的試驗方法 |
Test Method for Linear Coefficient of Thermal Expansion of Rock Using Bonded Electric Resistance Strain Gages |
| ASTM D 5336-2000 |
聚鄰苯二酰胺(PPA)噴射模鑄材料的標準規范 |
Standard Specification for Polyphthalamide (PPA) Injection Molding Materials |
| ASTM D 5337-1997 |
小型取樣泵校正用流率 |
Flow Rate for Calibration of Personal Sampling Pumps |
| ASTM D 5338-1998 |
在受控合成條件下測定塑料材料需氧的生物降解的試驗方法 |
Test Method for Determining Aerobic Biodegradation of Plastic Materials Under Controlled Composting Conditions |
| ASTM D 5339-1994 |
公路結構用結構鋼制作的質量保證計劃標準規程 |
Standard Practice for Quality Assurance Plan for Structural Steel Fabrication for Highway Structures |
| ASTM D 534-1974 |
堿性皂粉 |
Alkaline Soap Powder |
| ASTM D 5340-1998 |
機場跑道道面狀況指數測量的試驗方法 |
Test Method for Airport Pavement Condition Index Surveys |
| ASTM D 5341-1999 |
測量焦炭活性指數(CRI)和反應后的焦碳強度(CSR)的標準試驗方法 |
Standard Test Method for Measuring Coke Reactivity Index (CRI) and Coke Strength After Reaction (CSR) |
| ASTM D 5342-1997 |
紙和紙板抗彎曲性能標準試驗方法(基本結構的泰伯試驗機) |
Standard Test Method for Resistance to Bending of Paper and Paperboard (Taber-Type Tester in Basic Configuration) |
| ASTM D 5343-1997 |
陶磁面磚清潔器的清洗性能評估 |
Evaluating Cleaning Performance of Ceramic Tile Cleaners |
| ASTM D 5344-1999 |
部分取向紗延展力的試驗方法 |
Test Method for Extension Force of Partially Oriented Yarn |
| ASTM D 5345-1995 |
重載發動機對輔助冷卻添加劑初次裝入要求用預稀釋含水乙烯甘醇基低硅酸鹽發動機冷卻劑(最小積率50) |
Prediluted Aqueous Ethylene Glycol Base Low-Silicate Engine Coolant (50 Volume Percent Minimum) for Heavy-Duty Engines Requiring an Initial Charge of Supplemental Coolant Additive (SCA) |
| ASTM D 5346-1993 |
測定油乳液和軟化化合物用石油潤滑油傾點的試驗方法 |
Test Method for Determination of the Pour Point of Petroleum Oil Used in Fatliquors and Softening Compounds |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com