標準號 |
中文名稱 |
英文名稱 |
| ASTM E 1400-1995 |
高劑量γ射線輻射量測定校準實驗室的特性記述和功能 |
Characterization and Performance of A High-Dose Gamma Radiation Dosimetry Calibration Laboratory |
| ASTM E 1401-1996 |
重鉻酸鹽劑量測定系統的應用 |
Use of a Dichromate Dosimetry System |
| ASTM E 1402-1999 |
抽樣的相關術語 |
Terminology Relating to Sampling |
| ASTM E 1403-1997 |
實驗室玻璃燒瓶 |
Laboratory Glass Boiling Flasks |
| ASTM E 1404-1994 |
實驗室玻璃圓錐瓶 |
Laboratory Glass Conical Flasks |
| ASTM E 1405-1998 |
實驗室玻璃蒸餾燒瓶 |
Laboratory Glass Distillation Flasks |
| ASTM E 1406-1995 |
實驗室玻璃吸濾瓶 |
Laboratory Glass Filter Flasks |
| ASTM E 1407-1991 |
材料數據庫管理 |
Materials Database Management |
| ASTM E 1408-1991 |
門板和門系統聲衰減的實驗室測量方法 |
Test Method for Laboratory Measurement of the Sound Transmission Loss of Door Panels and Door Systems |
| ASTM E 1409-1997 |
用惰性氣體熔解技術測定鈦及鈦合金中氧含量的試驗方法 |
Test Method for Determination of Oxygen in Titanium and Titanium Alloys by the Inert Gas Fusion Technique |
| ASTM E 141-1991 |
根據概率取樣結果所得數據的驗收 |
Acceptance of Evidence Based on the Results of Probability Sampling |
| ASTM E 1410-1991 |
評估住宅用能源數據的確定 |
Specifying Data for Evaluation of Energy Used in Residential Buildings |
| ASTM E 1411-2001 |
X射線透視系統鑒定的標準實施規程 |
Standard Practice for Qualification of Radioscopic Systems |
| ASTM E 1412-1995 |
用頭上空間動態濃縮法分離和濃縮火災殘渣樣品中易燃和可燃液體殘留物的方法 |
Separation and Concentration of Flammable or Combustible Liquid Residues from Fire Debris Samples by Passive Headspace Concentration |
| ASTM E 1413-1995 |
用凈空動態濃縮法分離和濃縮火災殘渣樣品中易燃和可燃液體殘留物 |
Separation and Concentration of Flammable or Combustible Liquid Residues from Fire Debris Samples by Dynamic Headspace Concentration |
| ASTM E 1414-2000 |
共用一個天花板中通風系統的房間之間氣載噪聲衰減率的標準試驗方法 |
Standard Test Method for Airborne Sound Attenuation Between Rooms Sharing a Common Ceiling Plenum |
| ASTM E 1415-1991 |
浮萍圓瘤G3的毒性靜態測試的實施 |
Conducting Static Toxicity Tests with Lemna gibba G3 |
| ASTM E 1416-1996 |
焊件的射線檢驗法 |
Test Method for Radioscopic Examination of Weldments |
| ASTM E 1417-1999 |
液體滲透檢驗 |
Liquid Penetrant Examination |
| ASTM E 1418-1998 |
用水洗法作可視性滲透檢驗的試驗方法 |
Test Method for Visible Penetrant Examination Using the Water-Washable Process |
| ASTM E 1419-2002 |
利用聲波發射檢驗充有氣體的無縫壓力容器的標準試驗方法 |
Standard Test Method for Examination of Seamless, Gas- Filled, Pressure Vessels Using Acoustic Emission |
| ASTM E 142-1992 |
射線照相檢驗的質量控制 |
Controlling Quality of Radiographic Testing |
| ASTM E 1420-1991 |
離子輻射環境中設備用聚合材料的規定 |
Specifying Polymeric Materials for Service in Ionizing Radiation Environments |
| ASTM E 1421-1999 |
傅里葉轉換紅外線(FT-IR)光譜儀的性能描述和測量:0級和1級試驗 |
Describing and Measuring Performance of Fourier Transform Infrared (FT-IR) Spectrometers: Level Zero and Level One Tests |
| ASTM E 1422-2001 |
法庭書寫用墨水的比較試驗方法的標準指南 |
Standard Guide for Test Methods for Forensic Writing Ink Comparison |
| ASTM E 1423-1999 |
主窗設計系統固態導熱系數測定的標準規程 |
Standard Practice for Determining the Steady State Thermal Transmittance of Fenestration Systems |
| ASTM E 1424-1991 |
在試樣兩側特定壓力和溫度差下透過外窗,護墻和門的空氣泄漏率的測定方法 |
Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Curtain Walls and Doors Under Specified Pressure and Temperature Differences Across the Specimen |
| ASTM E 1425-1991 |
外窗和門傳聲性能的測定 |
Determining the Accoustical Performance of Exterior Windows and Doors |
| ASTM E 1426-1998 |
殘余應力X-射線缺陷測量效果彈性參數測定的試驗方法 |
Test Method for Determining the Effective Elastic Parameter for X-Ray Diffraction Measurements of Residual Stress |
| ASTM E 1427-1991 |
測定抗微生物藥劑和其它藥劑對生物膜的防護、鈍化和脫除效果試驗方法的選擇 |
Selecting Test Methods to Determine the Effectiveness of Antimicrobial Agents and Other Chemicals for the Prevention, Inactivation and Removal of Biofilm |
| ASTM E 1428-1999 |
用輪枝鏈霉菌屬網(粉紅染色生物體)在防腐蝕聚合物中或聚合物上進行抗微生物性能評價的試驗方法 |
Test Method for Evaluating the Performance of Antimicrobials in or on Polymeric Solids Against Staining by Streptoverticillium Reticulum (a Pink Stain Organism) |
| ASTM E 1429-1991 |
灑藥機及類似設施噴灑農藥時對人體暴露部分健康的潛在危害的評定 |
Assessing the Health Hazard of Pesticides to Applicators and Others with Potential Exposure |
| ASTM E 143-1987 |
室溫下剪切模量的測試方法 |
Test Method for Shear Modulus at Room Temperature |
| ASTM E 1430-1991 |
帶有地下儲存容器的卸壓探測裝置的使用 |
Using Release Detection Devices with Underground Storage Tanks |
| ASTM E 1431-1998 |
食品加工用電子和韌致輻射裝置的劑量測定 |
Dosimetry in Electron and Bremsstrahlung Irradiation Facilities for Food Processing |
| ASTM E 1432-1991 |
從中間尺寸規定數據組中產生的單一和群體感覺閾值的確定和計算 |
Defining and Calculating Individual and Group Sensory Thresholds from Forced-Choice Data Sets of Intermediate Size |
| ASTM E 1433-1995 |
環境聲學標準的選擇 |
Selection of Standards on Environmental Acoustics |
| ASTM E 1434-2000 |
記錄數據庫中纖維增強復合材料的機械試驗數的標準指南 |
Standard Guide for Recording Mechanical Test Data of Fiber-Reinforced Composite Materials in Databases |
| ASTM E 1435-1998 |
帶碳化硅晶須的增強的氧化鋁致密物品的搬運 |
Handling Densified Articles of Aluminum Oxide Reinforced with Silicon Carbide Whiskers |
| ASTM E 1436-1991 |
碳化硅晶須增強的氮化硅致密制品的搬運 |
Handling Densified Articles of Silicon Nitride Reinforced with Silicon Carbide Whiskers |
| ASTM E 1437-1998 |
碳化硅晶須的搬運 |
Handling Silicon Carbide Whiskers |
| ASTM E 1438-1991 |
用次級離子質譜法(SIMS)測量濺射深度成形界面的寬度 |
Measuring Widths of Interfaces in Sputter Depth Profiling Using SIMS |
| ASTM E 1439-1998 |
青蛙胚胎畸形生成爪蟾屬的試驗 |
Conducting the Frog Embryo Teratogenesis Assay-Xenopus (Fetax) |
| ASTM E 144-1994 |
氧燃燒彈的推薦安全使用 |
Recommended Safe Use of Oxygen Combustion Bombs |
| ASTM E 1440-1991 |
短尾輪蟲科劇毒性的測試 |
Acute Toxicity Test with the Rotifer Brachionus |
| ASTM E 1441-1995 |
計算機斷層攝影(CI)圖象 |
Computed Tomography (CT) Imaging |
| ASTM E 1442-1994 |
高速公路交通監視 |
Highway-Traffic Monitoring |
| ASTM E 1443-1994 |
與建筑,材料存取以及化學專業數據庫相關的術語 |
Terminology Relating to Building and Accessing Material and Chemical Databases |
| ASTM E 1444-2001 |
磁粉檢驗標準實施規程 |
Standard Practice for Magnetic Particle Examination |
| ASTM E 1445-1998 |
與具有潛在危險性的化合物相關的術語 |
Terminology Relating to Hazardous Potential of Chemicals |
| ASTM E 1446-1992 |
用直流等離子體輻射光譜法作精煉金的化學分析試驗法 |
Test Method for Chemical Analysis of Refined Gold by Direct Current Plasma Emission Spectroscopy |
| ASTM E 1447-2001 |
用惰性氣體熔解熱傳導法測定鈦合金中氫的標準試驗方法 |
Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity Method |
| ASTM E 1448-1992 |
道路粗糙度對車輛影響的測量系統的校正 |
Calibration of Systems Used for Measuring Vehicular Response to Pavement Roughness |
| ASTM E 1449-1992 |
超臨界流體色譜法的術語和相互關系 |
Supercritical Fluid Chromatography Terms and Relationships |
| ASTM E 145-1994 |
重力對流式和強制通風式烘爐 |
Gravity-Convection and Forced-Ventilation Ovens |
| ASTM E 1450-1992 |
液氦中結構合金的抗拉性試驗法 |
Test Method for Tension Testing of Structural Alloys in Liquid Helium |
| ASTM E 1451-1998 |
含有碳化硅須晶和纖維的廢棄物處置的標準指南 |
Standard Guide for Disposal of Wastes Containing Silicon Carbide Whiskers and Fibers |
| ASTM E 1452-1992 |
分光光度和光譜原子分析用校正溶液的制備 |
Preparation of Calibration Solutions for Spectrophotometric and for Spectroscopic Atomic Analysis |
| ASTM E 1453-1993 |
包含模擬或數字X射線檢驗數據的介質的存儲 |
Storage of Media That Contains Analog or Digital Radioscopic Data |
| ASTM E 1454-1992 |
數字超聲波測試數據的計算機傳送用數據段 |
Data Fields for Computerized Transfer of Digital Ultrasonic Testing Data |
| ASTM E 1455-1997 |
用三原色比色計從直觀顯示裝置中得到比色分析的數據 |
Obtaining Colorimetric Data from a Visual Display Unit Using Tristimulus Colorimeters |
| ASTM E 1456-1997 |
固體苛性鉀(固體氫氧化鉀) |
Caustic Potash; Solid (Potassium Hydroxide; Solid) |
| ASTM E 1457-1992 |
測量金屬蠕變開裂增長速度的試驗方法 |
Test Method for Measurement of Creep Crack Growth Rates in Metals |
| ASTM E 1458-1992 |
用光掩模原版校準檢驗激光繞射粒子定尺寸儀器的試驗方法 |
Test Method for Calibration Verification of Laser Diffraction Particle Sizing Instruments Using Photomask Reticles |
| ASTM E 1459-1992 |
對物理性證據作標記及與之相關的文獻工作 |
Physical Evidence Labeling and Related Documentation |
| ASTM E 1460-1992 |
保健知識基本系數的確定和分配(醫學邏輯系統用Arden語法) |
Defining and Sharing Modular Health Knowledge Bases (Arden Syntax for Medical Logic Systems) |
| ASTM E 1461-2001 |
閃光法測定固定導熱性的標準試驗方法 |
Standard Test Method for Thermal Diffusivity of Solids by the Flash Method |
| ASTM E 1462-1995 |
光電器件模塊的完整性絕緣和連續地面路人境的試驗方法 |
Test Method for Insulation Integrity and Ground Path Continuity of Photovoltaic Modules |
| ASTM E 1463-1992 |
用來自美國西海岸的糠蝦做靜態和動態劇毒性試驗的導則 |
Conducting Static and Flow-Through Acute Toxicity Tests with Mysids from the West Coast of the United States |
| ASTM E 1464-1992 |
商用和研究用建筑物及設施的能源發展監督協議 |
Developing Energy Monitoring Protocols for Commercial and Institutional Buildings or Facilities |
| ASTM E 1465-1992 |
新式低層住宅設計和建造用氡控制方案的選擇 |
Radon Control Options for the Design and Construction of New Low Rise Residential Buildings |
| ASTM E 1466-1992 |
臨床試驗室中取樣管上條碼的使用 |
Use of Bar Codes on Specimen Tubes in the Clinical Laboratory |
| ASTM E 1467-1994 |
獨立的計算機系統間數字型神經生理學數據的傳送 |
Transferring Digital Neurophysiological Data Between Independent Computer Systems |
| ASTM E 1468-1992 |
用吊籃采樣器采集海底深處大型無脊椎動物 |
Collecting Benthic Macroinvertebrates with the Basket Sampler |
| ASTM E 1469-1992 |
用多層板采樣器在海低深處采集大型無脊椎動物 |
Collecting Benthic Macroinvertebrates with Multiple-Plate Samplers |
| ASTM E 147-1961 |
用基耶達法進行氮氣微量測定用儀器 |
Apparatus for Microdetermination of Nitrogen by Kjeldahl Method |
| ASTM E 1470-1992 |
電泳遷移率法測定蛋白質特性的測試方法 |
Test Method for Characterization of Proteins by Electrophoretic Mobility |
| ASTM E 1471-1992 |
計算機處理的材料性能數據庫中纖維、填充料和磁心材料的識別 |
Identification of Fibers, Fillers and Core Materials in Computerized Material Property Databases |
| ASTM E 1472-1992 |
消防模型計算機軟件的鑒定及發證 |
Documenting Computer Software for Fire Models |
| ASTM E 1473-1994 |
鎳,鈷和耐高溫合金化學分析用測試方法 |
Test Methods for Chemical Analysis of Nickel, Cobalt and High-Temperature Alloys |
| ASTM E 1474-2001 |
用小型耗氧熱量計測定裝飾家具和床墊部件或組件的放熱率的標準試驗方法 |
Standard Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter |
| ASTM E 1475-1997 |
數字放射性測試數據的計算機傳輸?shù)臄?shù)據字段 |
Data Fields for Computerized Transfer of Digital Radiological Test Data |
| ASTM E 1476-1997 |
金屬識別、定級和分類的標準指南 |
Standard Guide for Metals Identification, Grade Verification, and Sorting |
| ASTM E 1477-1998 |
使用集成球形反射計測定音響材料反光因素的試驗方法 |
Test Method for Luminous Reflectance Factor of Acoustical Materials by Use of Integrating-Sphere Reflectometers |
| ASTM E 1478-1997 |
透明薄板材料的視覺色彩評定實用規程 |
Standard Practice for Visual Color Evaluation of Transparent Sheet Materials |
| ASTM E 1479-1999 |
感應耦合等離子體光學放射分光計的描述與規定的標準規程 |
Standard Practice for Describing and Specifying Inductively-Coupled Plasma Atomic Emission Spectrometers |
| ASTM E 1480-1992 |
設備管理術語(與建筑相關的) |
Terminology of Facility Management (Building-Related) |
| ASTM E 1481-2000 |
建筑物用護欄裝置和圍欄的標準術語 |
Standard Terminology of Railing Systems and Rails for Buildings |
| ASTM E 1482-1992 |
殺病毒劑功效評定用殺病毒劑的中和作用試驗方法 |
Test Method for Neutralization of Virucidal Agents in Virucidal Efficacy Evaluations |
| ASTM E 1483-1992 |
評定鼠和兔的毒性傳播試驗方法 |
Test Method for Assessing Developmental Toxicity in Rats and Rabbits |
| ASTM E 1484-1992 |
材料及化學制品性能數據和數據庫質量指示器的格式和使用 |
Formatting and Use of Material and Chemical Property Data and Database Quality Indicators |
| ASTM E 1485-1992 |
材料及化學制品性能數據庫描述 |
Development of Material and Chemical Property Database Descriptions |
| ASTM E 1486-1998 |
利用波紋度、行車軌跡和水平度準則測定地板公差的標準試驗方法 |
Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria |
| ASTM E 1486M-1998 |
利用波紋度、行車軌跡和水平度準則(米制)測定地板公差的標準試驗方法 |
Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria Metric |
| ASTM E 1488-1996 |
研制和運用ASTM試驗方法用的統計程序 |
Statistical Procedures to Use in Developing and Applying ASTM Test Methods |
| ASTM E 1489-1998 |
通過用慣性剖面測量裝置做的縱剖面測量來計算道路承載值的標準實踐 |
Standard Practice for Computing Ride Number of Roads from Longitudinal Profile Measurements Made by an Inertial Profile Measuring Device |
| ASTM E 1490-1992 |
皮膚對脂膏及洗劑的感覺分析的描述 |
Descriptive Skinfeel Analysis of Creams and Lotions |
| ASTM E 1491-1997 |
對塵霧最低自燃溫度的試驗方法 |
Test Method for Minimum Autoignition Temperature of Dust Clouds |
| ASTM E 1492-1992 |
法庭科學實驗室用證據的接收、建檔、存儲和提取 |
Receiving, Documenting, Storing and Retrieving Evidence in a Forensic Science Laboratory |
| ASTM E 1493-2001 |
抗菌素M13或其DNA識別的標準導則 |
Standard Guide for Identification of Bacteriophage M13 or Its DNA |
| ASTM E 1494-1992 |
噴涂或鏝刀涂抹的易碎含石棉建筑材料用密封劑 |
Encapsulants for Spray- or-Trowel-Applied Friable Asbestos-Containing Building Materials |
| ASTM E 1495-1997 |
復合材料、疊層板材和粘接件的機械性能的聲學超聲波評定 |
Acousto-Ultrasonic Assessment of Mechanical Properties of Composites, Laminates and Bonded Joints |
| ASTM E 1496-1997 |
中子射線照相尺寸測量的試驗方法 |
Test Method for Neutron Radiographic Dimensional Measurements |
| ASTM E 1497-2000 |
水混合金屬加工液的安全使用的標準規程 |
Standard Practice for Safe Use of Water-Miscible Metal Removal Fluids |
| ASTM E 1498-1992 |
海草性繁殖試驗的實施 |
Conducting Sexual Reproduction Tests with Seaweeds |
| ASTM E 1499-1997 |
監測員挑選,評價和訓練的指南 |
Guide to the the Selection, Evaluation and Training of Observers |
| ASTM E 1500-1993 |
用道路表面高程剖面記錄計算出均方數值 |
Computing Mean Square Numerics from Road Surface Elevation Profile Records |
| ASTM E 1501-1999 |
提高行人能見度用反射標志的夜間光學性能 |
Nighttime Photometric Performance of Retroreflective Pedestrian Markings for Visibility Enhancement |
| ASTM E 1502-1998 |
基準溫度凍結點室的使用 |
Use of Freezing-Point Cells for Reference Temperatures |
| ASTM E 1503-1997 |
使用數字統計分析系統測量室外聲音的試驗方法 |
Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Analysis System |
| ASTM E 1504-1992 |
次級離子質譜(SIMS)測定中質譜數據報告的標準規范 |
Standard Practice for Reporting Mass Spectral Data in Secondary Ion Mass Spectrometry (SIMS) |
| ASTM E 1505-1992 |
根據離子移植外標物測定 SIMS 有關敏感因素的標準指南 |
Standard Guide for Determining SIMS Relative Sensitivity Factors from Ion Implanted External Standards |
| ASTM E 1506-1997 |
分析酸級氟化鈣(熒石)的試驗方法 |
Test Methods for Analysis of Acid Grade Calcium Fluoride (Fluorspar) |
| ASTM E 1507-1998 |
光學輻射直讀儀分光計的描述與規定 |
Describing and Specifying the Spectrometer of an Optical Emission Direct-Reading Instrument |
| ASTM E 1508-1998 |
用能量分散能譜學作定量分析 |
Quantitative Analysis by Energy-Dispersive Spectroscopy |
| ASTM E 1509-1995 |
顆粒燃料燃燒型房間加熱器 |
Room Heaters, Pellet Fuel-Burning Type |
| ASTM E 1510-1995 |
氣相色譜儀安裝熔凝硅石敞開管狀毛細管叢 |
Installing Fused Silica Open Tubular Capillary Columns in Gas Chromatographs |
| ASTM E 1511-1993 |
液相和離子色譜法試驗導電檢波器 |
Testing Conductivity Detectors Used in Liquid and Ion Chromatography |
| ASTM E 1512-1993 |
膠粘連接錨固裝置的粘結性能試驗方法 |
Test Methods for Testing Bond Performance of Adhesive-Bonded Anchors |
| ASTM E 1513-1993 |
噴涂耐火材料的應用(SFRMs) |
Application of Sprayed Fire-Resistive Materials (SFRMs) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com