標準號 |
中文名稱 |
英文名稱 |
| ASTM E 2144-2001 |
工作場所環境中金屬加工液體氣溶膠中內毒素的個人取樣和分析的標準實施規程 |
Standard Practice for Personal Sampling and Analysis of Endotoxin in Metalworking Fluid Aerosols in Workplace Atmospheres |
| ASTM E 2145-2001 |
醫療信息學模型建立的標準實施規程 |
Standard Practice for Modeling in Health Informatics |
| ASTM E 2146-2001 |
用聚合酶鏈反應技術探測人體免疫缺乏病毒HIV-1的核酸類的標準指南 |
Standard Guide for Detection of Nucleic Acid Sequences of the Human Immunodeficiency Virus HIV-1 by the Polymerase Chain Reaction Technique |
| ASTM E 2147-2001 |
保健信息系統中使用的審核與揭示記錄的標準規范 |
Standard Specification for Audit and Disclosure Logs for Use in Health Information Systems |
| ASTM E 2148-2001 |
金屬加工或金屬切削液衛生與安全相關文獻的使用標準指南 |
Standard Guide for Using Documents Related to Metalworking or Metal Removal Fluid Health and Safety |
| ASTM E 2149-2001 |
在動態接觸條件下固定抗菌劑抗菌活性測定的標準試驗方法 |
Standard Test Method for Determining the Antimicrobial Activity of Immobilized Antimicrobial Agents Under Dynamic Contact Conditions |
| ASTM E 215-1998 |
無縫鋁合金管的電磁檢驗用的標準化設備 |
Standardizing Equipment for Electromagnetic Examination of Seamless Aluminum-Alloy Tube |
| ASTM E 2150-2001 |
壽命周期環境工作件-環境損耗件結構標準分類 |
Standard Classification for Life-Cycle Environmental Work Elements-Environmental Cost Element Structure |
| ASTM E 2151-2001 |
獨院附聯式和獨建式住宅的規定和性能評定指南的標準術語 |
Standard Termninology of Guides for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings |
| ASTM E 2152-2001 |
由雙譜光度學數據得到的熒光物顏色計算的標準操作規程 |
Standard Practice for Computing the Colors of Fluorescent Objects from Bispectral Photometric Data |
| ASTM E 2153-2001 |
熒光顏色評價雙光譜光度學數據獲得的標準實施規程 |
Standard Practice for Obtaining Bispectral Photometric Data for Evaluation of Fluorescent Color |
| ASTM E 2156-2001 |
與獨院附屬和獨立住宅性能標準指南相一致的比較設計、系統和材料的經濟效能的評價的標準指南 |
Standard Guide for Evaluating Economic Performance of Alternative Designs, Systems, and Materials in Compliance with Performance Standard Guides for Single-Family Attached and Detached Dwellings |
| ASTM E 2157-2001 |
用環道計測量路面宏觀結構性能的標準試驗方法 |
Standard Test Method for Measuring Pavement Macrotexture Properties Using the Circular Track Meter |
| ASTM E 2158-2001 |
902-928MHz頻帶微波的專用短程通信物理層的標準規范 |
Standard Specification for Dedicated Short Range Communication (DSRC) Physical Layer Using Microwave in the 902 to 928 MHz Band |
| ASTM E 2159-2001 |
評審員/審核員或技術專家的選擇、委派和監控的標準指南 |
Standard Guide for Selection, Assignment, and Monitoring of Persons To Be Utilized as Assessors/Auditors or Technical Experts |
| ASTM E 2161-2001 |
熱分析中性能鑒定的相關標準術語 |
Standard Terminology Relating to Performance Validation in Thermal Analysis |
| ASTM E 2165-2001 |
金屬、礦石和相關材料化學分析不定性預算制定的標準實施規范 |
Standard Practice for Establishing an Uncertainty Budget for the Chemical Analysis of Metals, Ores, and Related Materials |
| ASTM E 2166-2001 |
建筑數據組織和管理的標準實施規范 |
Standard Practice for Organizing and Managing Building Data |
| ASTM E 2167-2001 |
石材固結劑的選擇和使用標準指南 |
Standard Guide for Selection and Use of Stone Consolidants |
| ASTM E 2168-2001 |
建筑結構估算中容許偏差、偶然事故和儲備量的標準分類 |
Standard Classification for Allowance, Contingency and Reserve Sums in Building Construction Estimating |
| ASTM E 2172-2001 |
利用線蟲Caenorhabditis elegans進行實驗室土壤毒性試驗的標準指南 |
Standard Guide for Conducting Laboratory Soil Toxicity Tests with the Nematode Caenorhabditis elegans |
| ASTM E 2173-2001 |
揭示環境責任的標準指南 |
Standard Guide for Disclosure of Environmental Liabilities |
| ASTM E 2174-2001 |
已安裝的防火墻現場檢驗的標準實施規范 |
Standard Practice for On-Site Inspection of Installed Fire Stops |
| ASTM E 2175-2001 |
規定多角分光光度計幾何形狀的標準實施規范 |
Standard Practice for Specifying the Geometry of Multiangle Spectrophotometers |
| ASTM E 2176-2001 |
連續浸潤標準條件下路面標記反射亮度系數測量的標準試驗方法 |
Standard Test Method for Measuring the Coefficient of Retroreflected Luminance (RL) of Pavement Markings in a Standard Condition of Continuous Wetting |
| ASTM E 2177-2001 |
標準潮濕條件下路面標記反射亮度系數測量的標準試驗方法 |
Standard Test Method for Measuring the Coefficient of Retroreflected Luminance (RL) of Pavement Markings in a Standard Condition of Wetness |
| ASTM E 2179-2001 |
實驗室測量地板覆蓋物在降低通過混凝土地板傳輸?shù)臎_擊聲音方面的效果的標準試驗方法 |
Standard Test Method for Laboratory Measurement of the Effectiveness of Floor Coverings in Reducing Impact Sound Transmission Through Concrete Floors |
| ASTM E 2180-2001 |
聚合或疏水材料中摻入的殺微生物劑活性測定的標準試驗方法 |
Standard Test Method for Determining the Activity of Incorporated Antimicrobial Agent(s) In Polymeric or Hydrophobic Materials |
| ASTM E 2181/E 2181M-2001 |
壓實的礦物絕緣、金屬護套的貴金屬熱電偶和熱電偶電纜的標準規范 |
Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed, Noble Metal Thermocouples and Thermocouple Cable |
| ASTM E 2182-2002 |
保健用臨床XML DTD的標準規范 |
Standard Specification for Clinical XML DTDs in Healthcare |
| ASTM E 2183-2002 |
XML DTD的設計、構造和實現標準指南 |
Standard Guide for XML DTD Design, Architecture and Implementation |
| ASTM E 219-1980 |
鈾燃料中原子裂變百分率的測試方法(放射化學法) |
Test Method for Atom Percent Fission in Uranium Fuel (Radiochemical Method) |
| ASTM E 222-1994 |
乙酸酐乙�；瘯r(shí)羥基組的測試方法 |
Test Methods for Hydroxyl Groups by Acetic Anhydride Acetylation |
| ASTM E 223-1996 |
硫酸分析的測試方法 |
Test Methods for Analysis of Sulfuric Acid |
| ASTM E 224-1996 |
鹽酸分析的測試方法 |
Test Methods for Analysis of Hydrochloric Acid |
| ASTM E 227-1990 |
用點對面技術對鋁及鋁合金進行光發射光譜測定分析的試驗方法 |
Test Method for Optical Emission Spectrometric Analysis of Aluminum and Aluminum Alloys by the Point-to-Plane Technique |
| ASTM E 228-1995 |
用透明石英膨脹儀測定固體材料線性熱膨脹的試驗方法 |
Test Method for Linear Thermal Expansion of Solid Materials with a Vitreous Silica Dilatometer |
| ASTM E 229-1997 |
結構粘合劑剪切強度和剪切模量的試驗方法 |
Test Method for Shear Strength and Shear Modulus of Structural Adhesives |
| ASTM E 23-2001 |
金屬材料切口試棒沖擊試驗的標準試驗方法 |
Standard Test Methods for Notched Bar Impact Testing of Metallic Materials |
| ASTM E 230-1998 |
標準化熱電偶用溫度電動勢(EMF)圖表 |
Temperature-Electromotive Force (EMF) Tables for Standardized Thermocouples |
| ASTM E 234-1998 |
不飽和脂化合物總溴值的試驗方法 |
Test Method for Total Bromine Number of Unsaturated Aliphatic Chemicals |
| ASTM E 235-1988 |
核設備或其它有高度可靠性的設備用有護罩的K型熱電偶 |
Thermocouples, Sheathed, Type K for Nuclear or for Other High-Reliability Applications |
| ASTM E 236-1966 |
烷氧基團微量測定用儀器 |
Apparatus for Microdetermination of Alkoxyl Groups |
| ASTM E 237-1994 |
微量容器(量瓶和離心管) |
Microvolumetric Vessels (Volumetric Flasks and Centrifuge Tubes) |
| ASTM E 238-1984 |
金屬材料的針型承載試驗方法 |
Test Method for Pin-Type Bearing Test of Metallic Materials |
| ASTM E 241-2000 |
建筑物抗水損壞極限的標準指南 |
Standard Guide for Limiting Water-Induced Damage to Buildings |
| ASTM E 242-2001 |
在某些參數改變時射線照相圖像外觀用標準參考射線照相 |
Standard Reference Radiographs for Appearances of Radiographic Images as Certain Parameters Are Changed |
| ASTM E 243-1997 |
銅及銅合金管的電磁(渦流)檢驗 |
Electromagnetic (Eddy-Current) Examination of Copper and Copper-Alloy Tubes |
| ASTM E 244-1980 |
用質譜法測定鈾和钚燃料中原子裂變百分率的試驗方法 |
Test Method for Atom Percent Fission in Uranium and Plutonium Fuel (Mass Spectrometric Method) |
| ASTM E 246-2001 |
用重鉻酸鹽滴定法測定鐵礦石及有關材料中總含鐵量的標準試驗方法 |
Standard Test Methods for Determination of Iron in Iron Ores and Related Materials by Dichromate Titration |
| ASTM E 247-1996 |
鐵礦石和錳礦石中二氧化硅含量的測試方法 |
Test Method for Silica in Iron Ores and Manganese Ores |
| ASTM E 248-1997 |
用焦磷酸鹽法(電勢分析法)測定錳礦石中錳含量的標準試驗方法 |
Standard Test Method for Manganese in Manganese Ore by the Pyrophosphate (Potentiometric) Method |
| ASTM E 250-1998 |
使用CODEN的標準推薦規程 |
Standard Recommended Practice for Use of CODEN |
| ASTM E 251-1992 |
金屬膠結抗應變儀運行特性的試驗方法 |
Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages |
| ASTM E 252-1984 |
用稱重法測定薄箔和薄膜厚度的試驗方法 |
Test Method for Thickness of Thin Foil and Film by Weighing |
| ASTM E 253-2000 |
材料和產品感官評定的相關標準術語 |
Standard Terminology Relating to Sensory Evaluation of Materials and Products |
| ASTM E 253a-2001 |
材料和產品感官評定的相關標準術語 |
Standard Terminology Relating to Sensory Evaluation of Materials and Products |
| ASTM E 255-1991 |
化學成分測定用銅和銅合金的取樣 |
Sampling Copper and Copper Alloys for the Determination of Chemical Composition |
| ASTM E 256-1998 |
用過氧化鈉彈燃燒法測定有機化合物中氯含量的試驗方法 |
Test Method for Chlorine in Organic Compounds by Sodium Peroxide Bomb Ignition |
| ASTM E 257-1998 |
用過氧化鈉彈燃燒法測定有機化合物中硫含量的試驗方法 |
Test Method for Sulfur in Organic Compounds by Sodium Peroxide Bomb Ignition |
| ASTM E 258-1967 |
用改進的基耶達法測定有機化合物中總氮含量的試驗方法 |
Test Method for Total Nitrogen in Organic Materials by Modified Kjeldahl Method |
| ASTM E 259-1998 |
半球幾何形狀壓制粉末的白色反射系數轉換標準的準備 |
Preparation of Pressed Powder White Reflectance Factor Transfer Standards for Hemispherical Geometry |
| ASTM E 260-1996 |
填料塔氣相色譜法 |
Packed Column Gas Chromatography |
| ASTM E 261-1998 |
用放射性技術測定中子的積分通量率、積分通量和中子波譜 |
Determining Neutron Fluence Rate, Fluence and Spectra by Radioactivation Techniques |
| ASTM E 262-1997 |
用放射性技術測定熱中子反應和積分通量率的試驗方法 |
Test Method for Determining Thermal Neutron Reaction and Fluence Rates by Radioactivation Techniques |
| ASTM E 263-2000 |
用鐵的放射性測量快中子反應速率的標準試驗方法 |
Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Iron |
| ASTM E 264-1992 |
通過鎳的放射性測量快中子反應速率的試驗方法 |
Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Nickel |
| ASTM E 265-1998 |
用硫-32的放射性測量快速中子流量密度和反應速率的測試方法 |
Test Method for Measuring Reaction Rates and Fast-Neutron Fluences by Radioactivation of Sulfur-32 |
| ASTM E 266-1992 |
通過鋁的放射性測量快中子反應速率的試驗方法 |
Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Aluminum |
| ASTM E 267-1990 |
鈾和钚的濃度和同位素豐度的測試方法 |
Test Method for Uranium and Plutonium Concentrations and Isotopic Abundances |
| ASTM E 271-1998 |
分析含水氫氟酸的試驗方法 |
Test Methods for Analysis of Aqueous Hydrofluoric Acid |
| ASTM E 272-1999 |
高強度銅基和鎳銅合金鑄件用參考射線照片 |
Reference Radiographs for High-Strength Copper-Base and Nickel-Copper Alloy Castings |
| ASTM E 273-2001 |
焊接管道焊接區域的超聲波檢驗標準實施規程 |
Standard Practice for Ultrasonic Examination of the Weld Zone of Welded Pipe and Tubing |
| ASTM E 274-1997 |
用足尺輪胎測定路面抗滑性的試驗方法 |
Test Method for Skid Resistance of Paved Surfaces Using a Full-Scale Tire |
| ASTM E 275-2001 |
說明和測量紫外線,可見和近紅外線分光光度計的性能的標準操作規程 |
Standard Practice for Describing and Measuring Performance of Ultraviolet, Visible, and Near-Infrared Spectrophotometers |
| ASTM E 276-1998 |
用4號篩(4.75毫米)及較細篩進行含金屬礦石和有關材料粒度或篩分的試驗方法 |
Test Method for Particle Size or Screen Analysis at No. 4 (4.75-mm) Sieve and Finer for Metal-Bearing Ores and Related Materials |
| ASTM E 279-1997 |
鐵礦丸和燒結礦抗磨性測定的試驗方法 |
Test Method for Determination of Abrasion Resistance of Iron Ore Pellets and Sinter (Tumbler Test) |
| ASTM E 28-1999 |
環球儀測定軟化點的試驗方法 |
Test Method for Softening Point by Ring-and-Ball Apparatus |
| ASTM E 280-1998 |
重壁(4 1/2 至12-in.)(114 至 305 mm)鋼鑄件的基準射線照片 |
Reference Radiographs for Heavy-Walled (4 1/2 to 12-in.)(114 to 305-mm ) Steel Castings |
| ASTM E 283-1991 |
通過樣品的規定壓差測定外窗、護墻及門的漏氣率的試驗方法 |
Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Curtain Walls and Doors Under Specified Pressure Differences Across the Specimen |
| ASTM E 284-1999 |
外觀形狀術語 |
Terminology of Appearance |
| ASTM E 285-1980 |
熱絕緣材料的氧乙炔燒蝕試驗方法 |
Test Method for Oxyacetylene Ablation Testing of Thermal Insulation Materials |
| ASTM E 287-1994 |
滴定管 |
Burets |
| ASTM E 288-1994 |
量瓶 |
Volumetric Flasks |
| ASTM E 289-1999 |
用干涉測量測試剛性固體的線性熱膨脹的試驗方法 |
Test Method for Linear Thermal Expansion of Rigid Solids with Interferometry |
| ASTM E 29-1993 |
使用試驗數據中重要數字以確定對規范的適應性 |
Using Significant Digits in Test Data to Determine Conformance with Specifications |
| ASTM E 290-1997 |
金屬材料延展性的彎曲測試的標準試驗方法 |
Standard Test Method for Bend Testing of Material for Ductility |
| ASTM E 291-1996 |
苛性鈉和苛性鉀(氫氧化鈉和氫氧化鉀)的化學分析試驗方法 |
Test Methods for Chemical Analysis of Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide) |
| ASTM E 292-1983 |
材料斷裂時間的凹口張力試驗 |
Conducting Time-for-Rupture Notch Tension Tests of Materials |
| ASTM E 293-1968 |
用溶解技術測定低合金鋼中酸溶性鋁的光譜分析試驗法 |
Method for Spectrographic Determination of Acid-Soluble Aluminum in Low-Alloy Steel by the Solution Technique |
| ASTM E 294-1972 |
真空室系統有效抽氣速度的試驗方法 |
Test Method for Effective Pumping Speed of Vacuum Chamber Systems |
| ASTM E 295-1982 |
測量油擴散泵速度的試驗方法 |
Test Method for Measured Speed of Oil Diffusion Pumps |
| ASTM E 296-1970 |
用于空間模擬器的電離壓力計 |
Ionization Gage Application to Space Simulators |
| ASTM E 298-2001 |
檢定有機過氧化物的標準試驗方法 |
Standard Test Methods for Assay of Organic Peroxides |
| ASTM E 299-1997 |
有機溶劑中過氧化物痕量的試驗方法 |
Test Method for Trace Amounts of Peroxides in Organic Solvents |
| ASTM E 3-2001 |
金相試樣制備的標準實施規程范 |
Standard Practice for Preparation of Metallographic Specimens |
| ASTM E 300-1992 |
工業化學品的抽樣法 |
Sampling Industrial Chemicals |
| ASTM E 301-1994 |
有機酸總酸度的測試方法 |
Test Method for Total Acidity of Organic Acids |
| ASTM E 302-1995 |
一價有機酸的測試方法 |
Test Methods for Monobasic Organic Acids |
| ASTM E 303-1993 |
用英國擺錘檢驗器測定表面摩擦性能的方法 |
Method for Measuring Surface Frictional Properties Using the British Pendulum Tester |
| ASTM E 305-1989 |
制作和調節光譜化學分析曲線 |
Establishing and Controlling Spectrochemical Analytical Curves |
| ASTM E 307-1972 |
升高溫度時標準光譜發射的試驗方法 |
Test Method for Normal Spectral Emittance at Elevated Temperatures |
| ASTM E 308-1999 |
用CIE制估計物體顏色的標準規程 |
Standard Practice for Computing the Colors of Objects by Using the CIE System |
| ASTM E 309-1995 |
用磁飽和法做管狀鋼產品的渦流檢驗 |
Eddy-Current Examination of Steel Tubular Products Using Magnetic Saturation |
| ASTM E 310-1999 |
錫青銅鑄件用參考射線照片 |
Reference Radiographs for Tin Bronze Castings |
| ASTM E 312-1996 |
攝影樣片條件的描述和選擇 |
Description and Selection of Conditions for Photographing Specimens |
| ASTM E 313-1998 |
淡白不透明材料的白色與黃色指數的試驗方法 |
Test Method for Indexes of Whiteness and Yellowness of Near-White, Opaque Materials |
| ASTM E 314-1995 |
鐵礦石中錳含量的測試方法 |
Test Methods for Manganese in Iron Ores |
| ASTM E 315-1988 |
鉬的化學分析試驗方法 |
Test Methods for Chemical Analysis of Molybdenum |
| ASTM E 316-1995 |
錳礦石中鐵含量的測試方法 |
Test Method for Iron in Manganese Ore |
| ASTM E 317-2001 |
不用電子測量儀,超聲波脈沖回音試驗制運轉性能的評估的標準操作規程 |
Standard Practice for Evaluating Performance Characteristics of Ultrasonic Pulse- Echo Examination Instruments and Systems Without the Use of Electronic Measurement Instruments |
| ASTM E 318-1991 |
用比色法測定水溶液中鈾的試驗方法 |
Test Method for Uranium in Aqueous Solutions by Colorimetry |
| ASTM E 319-1985 |
單盤機械天平的評定 |
Evaluation of Single-Pan Mechanical Balances |
| ASTM E 32-1986 |
測定化學成分用鐵合金及鋼添加劑的取樣 |
Sampling Ferroalloys and Steel Additives for Determination of Chemical Composition |
| ASTM E 321-1996 |
釹-148法測定鈾和钚燃料中原子裂變百分比的試驗方法 |
Test Method for Atom Percent Fission in Uranium and Plutonium Fuel (Neodymium-148 Method) |
| ASTM E 322-1996 |
低合金鋼和鑄鐵的X射線發射光譜測定分析法 |
X-Ray Emission Spectrometric Analysis of Low-Alloy Steels and Cast Irons |
| ASTM E 323-1980 |
試驗用板孔篩 |
Perforated-Plate Sieves for Testing Purposes |
| ASTM E 324-1999 |
有機化合物的相對始熔點及終熔點和熔化范圍的標準試驗方法 |
Standard Test Method for Relative Initial and Final Melting Points and the Melting Range of Organic Chemicals |
| ASTM E 326-1996 |
用酞酸酐的脂化作用測定羥基團的試驗方法 |
Test Method for Hydroxyl Groups by Phthalic Anhydride Esterification |
| ASTM E 327-1994 |
用點對面技術作18-8型不銹鋼的光輻射光譜分析的測試方法 |
Test Method for Optical Emission Spectrometric Analysis of Stainless Type 18-8 Steels by the Point-to-Plane Technique |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com