標準號 |
中文名稱 |
英文名稱 |
| ASTM B 826-1997 |
用電阻探頭監測大氣腐蝕試驗的試驗方法 |
Test Method for Monitoring Atmospheric Corrosion Tests by Electrical Resistance Probes |
| ASTM B 827-1992 |
傳導混流氣的環境試驗 |
Conducting Mixed Flowing Gas (MFG) Environmental Tests |
| ASTM B 828-2000 |
通過銅和銅合金管及配件釬焊制作毛細管連接件的標準實施規范 |
Standard Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings |
| ASTM B 829-1999 |
鎳和鎳合金無縫管 |
Nickel and Nickel Alloys Seamless Pipe and Tube |
| ASTM B 830-1997 |
均勻試驗方法和頻率 |
Uniform Test Methods and Frequency |
| ASTM B 831-1993 |
薄鋁合金產品剪切試驗的試驗方法 |
Test Method for Shear Testing of Thin Aluminum Alloy Products |
| ASTM B 832-1993 |
含鎳和銅的電鑄 |
Electroforming with Nickel and Copper |
| ASTM B 833-1999 |
熱噴鍍用鋅和鋅合金線(噴鍍金屬)的標準規范 |
Standard Specification for Zinc and Zinc Alloy Wire for Thermal Spraying (Metallizing) |
| ASTM B 833a-2001 |
熱噴鍍用鋅和鋅合金線的標準規范(噴鍍金屬) |
Standard Specification for Zinc and Zinc Alloy Wire for Thermal Spraying (Metallizing) |
| ASTM B 834-1995 |
壓力強化粉末冶金鐵鎳鉻鉬和鎳鉻鉬鈳(Nb)合金管法蘭,管配件,閥門和零件 |
Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum and Nickel-Chromium-Molybdenum-Columbium (Nb) Alloy Pipe Flanges, Fittings, Valves and Parts |
| ASTM B 835-2000 |
使用單輸入線路結構的致密圓銅絞接導線的標準規范 |
Standard Specification for Compact Round Stranded Copper Conductors Using Single Input Wire Construction |
| ASTM B 836-2000 |
使用單輸入線路結構的致密圓鋁絞接導線的標準規范 |
Standard Specification for Compact Round Stranded Aluminum Conductors Using Single Input Wire Construction |
| ASTM B 837-1995 |
用于天然氣和液化石油氣燃料分配系統的無縫銅管標準規范 |
Standard Specification for Seamless Copper Tube for Natural Gas and Liquified Petroleum (LP) Gas Fuel Distribution Systems |
| ASTM B 839-1994 |
金屬鍍覆的外螺紋制品,緊固件和棒的殘留脆變的標準試驗方法.傾斜楔入法 |
Standard Test Method for Residual Embrittlement in Metallic Coated, Externally Threaded Articles, Fasteners, and Rod-Inclined Wedge Method |
| ASTM B 84-1990 |
精密電阻器用合金絲的溫度-電阻常數的測試方法 |
Test Method for Temperature-Resistance Constants of Alloy Wires for Precision Resistors |
| ASTM B 840-1994 |
鋅鈷合金沉積物用電解鍍層標準規范 |
Standard Specification for Electro-deposited Coatings for Zinc Cobalt Alloy Deposits |
| ASTM B 841-1999 |
鋅鎳合金沉積物用電解鍍層標準規范 |
Standard Specification for Electrodeposited Coatings for Zinc Nickel Alloy Deposits |
| ASTM B 842-1994 |
鋅鐵合金沉積物用電解鍍層標準規范 |
Standard Specification for Electrodeposited Coatings for Zinc Iron Alloy Deposits |
| ASTM B 843-1993 |
陰極防腐法用鎂合金陽極的標準規范 |
Standard Specification for Magnesium Alloy Anodes for Cathodic Protection |
| ASTM B 844-1998 |
銀錫氧化接觸材料的標準指南 |
Standard Guide for Silver-Tin Oxide Contact Material |
| ASTM B 845-1997 |
電觸點的混流氣體試驗用標準導則 |
Standard Guide for Mixed Flowing Gas (MFG) Tests for Electrical Contacts |
| ASTM B 846-2001 |
銅和銅合金標準術語 |
Standard Terminology for Copper and Copper Alloys |
| ASTM B 848-2000 |
粉末鍛造(P/F)的鐵構件標準規范 |
Standard Specification for Powder Forged (P/F) Ferrous Structural Parts |
| ASTM B 849-1994 |
對鋼鐵預處理以減小氫脆變危險的標準規范 |
Standard Specification for Pre-Treatments of Iron or Steel for Reducing Risk of Hydrogen Embrittlement |
| ASTM B 85-1999 |
鋁合金壓模鑄件 |
Aluminum-Alloy Die Castings |
| ASTM B 850-1998 |
對鋼鐵鍍層后處理以減小氫脆變危險的標準規范 |
Standard Specification for Post-Coating Treatments of Iron or Steel for Reducing the Risk of Hydrogen Embrittlement |
| ASTM B 851-1994 |
在鎳,自動催化鎳或鉻鍍覆或者最后鍍層之前金屬制品自動控制噴丸硬化的標準規范 |
Standard Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish |
| ASTM B 852-2001 |
薄鋼板熱浸鍍鋅用連續熱浸鍍鋅級鋅合金的標準規范 |
Standard Specification for Continuous Galvanizing Grade (CGG) Zinc Alloys for Hot-Dip Galvanizing of Sheet Steel |
| ASTM B 853-1998 |
粉末冶金(P/M)硼不銹鋼結構件的標準規范 |
Standard Specification for Powder Metallurgy (P/M) Boron Stainless Steel Structural Components |
| ASTM B 854-1998 |
測量電接觸中斷用標準導則 |
Standard Guide for Measuring Electrical Contact Intermittences |
| ASTM B 855-1994 |
用阿諾德測量計和霍爾漏斗測定金屬粉末體流率的標準試驗方法 |
Standard Test Method for Volumetric Flow Rate of Metal Powders Using Arnold Meter and Hall Funnel |
| ASTM B 856-1995 |
鍍覆鋼支持的同心鋪設鋁絞線標準規范 |
Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated Steel Supported (ACSS/TW) |
| ASTM B 856a-2001 |
鍍覆鋼支持的同心鋪設鋁絞線標準規范 |
Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated Steel Supported (ACSS) |
| ASTM B 857-1995 |
鍍覆鋼支持的成型鋼絲壓縮同心鋪設鋁絞線標準規范 |
Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Supported (ACSS/TW) |
| ASTM B 857a-2001 |
鍍覆鋼支持的成型鋼絲壓縮同心鋪設鋁絞線標準規范 |
Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Supported (ACSS/TW) |
| ASTM B 858-1995 |
用氨蒸氣試驗測定銅合金對應力腐蝕裂紋敏感度的標準試驗方法 |
Standard Test Method for Determination of Susceptibility to Stress Corrosion Cracking in Copper Alloys Using an Ammonia Vapor Test |
| ASTM B 858M-1995 |
用氨蒸氣試驗測定銅合金應力腐蝕裂開的標準試驗方法 |
Standard Test Method for Determination of Susceptibility to Stress Corrosion Cracking in Copper Alloys Using an Ammonia Vapor Test |
| ASTM B 859-1995 |
粒徑分析前耐熔金屬粉末及其化合物去除結塊的標準規程 |
Standard Practice for De-Agglomeration of Refractory Metal Powders and Their Compounds Prior to Particle Size Analysis |
| ASTM B 86-1998 |
鋅合金壓模鑄件 |
Zinc-Alloy Die Castings |
| ASTM B 860-2001 |
熱浸鍍鋅用鋅母合金的標準規范 |
Standard Specification for Zinc Master Alloys for Use in Hot Dip Galvanizing |
| ASTM B 861-2001 |
鈦和鈦合金無縫管的標準規范 |
Standard Specification for Titanium and Titanium Alloy Seamless Pipe |
| ASTM B 862-2001 |
鈦和鈦合金焊接管的標準規范 |
Standard Specification for Titanium and Titanium Alloy Welded Pipe |
| ASTM B 863-1999 |
鈦和鈦合金絲的標準規范 |
Standard Specification for Titanium and Titanium Alloy Wire |
| ASTM B 864/B 864M-2000 |
波紋鋁箱形涵洞標準規范 |
Standard Specification for Corrugated Aluminum Box Culverts |
| ASTM B 865-1996 |
沉淀硬化鎳銅鋁合金(UNS N05500)棒,條,絲,鍛件和鍛坯的標準規范 |
Standard Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy (UNS N05500) Bar, Rod, Wire, Forgings, and Forging Stock |
| ASTM B 866-1995 |
用聚硫化物浸入法測試金屬涂層中總疵點和機械損壞的標準試驗方法 |
Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by Polysulfide Immersion |
| ASTM B 867-1995 |
工程用鈀-鎳電鍍層的標準規范 |
Standard Specification for Electrodeposited Coatings of Palladium-Nickel for Engineering Use |
| ASTM B 868-1996 |
電氣連接系統的接觸性能分類的標準規程 |
Standard Practice for Contact Performance Classification of Electrical Connection Systems |
| ASTM B 869-1996 |
用于CATV用戶引線的包銅鋼電導線的技術規范 |
Standard Specification for Copper-Clad Steel Electrical Conductor for CATV Drop Wire |
| ASTM B 870-1996 |
銅-鈹合金鍛制和擠制合金C17500和C17510的標準規范 |
Standard Specification for Copper-Beryllium Alloy Forgings and Extrusions Alloys C17500 and C17510 |
| ASTM B 871-1996 |
鋁合金產品撕裂測試的標準試驗方法 |
Standard Test Method for Tear Testing of Aluminum Alloy Products |
| ASTM B 872-1996 |
彌散硬化鎳鐵鉻鈷(Nb)鈦鋁合金(UNS N09908)板,薄板及帶材的標準規范 |
Standard Specification for Precipitation-Hardening Nickel-Iron-Chromium- Columbium (Nb)-Titanium-Aluminum Alloy (UNS N09908) Plate, Sheet, and Strip |
| ASTM B 873-1996 |
B212,B329和B417的測試方法中用的表觀密度杯的容積測量的標準試驗方法 |
Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212, B329, and B417 |
| ASTM B 874-1996 |
用于固體滲金屬處理的鉻擴散鍍層的標準規范 |
Standard Specification for Chromium Diffusion Coating Applied by Pack Cementation Process |
| ASTM B 875-1996 |
用于固體滲金屬處理的鋁擴散鍍層的標準規范 |
Standard Specification for Aluminum Diffusion Coating Applied by Pack Cementation Process |
| ASTM B 876-1996 |
原子核能應用的用硼酸浸漬過的色散增強銅板材,片材,帶材,和圓形材的標準規范 |
Standard Specification for Borated Dispersion Strengthened Copper Plate, Sheet, Strip, and Rolled Bar for Nuclear Application |
| ASTM B 877-1996 |
磷鉬酸(PMA)法檢驗大的缺陷和機械損傷的標準試驗方法 |
Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by the Phosphomolybdic Acid (PMA) Method |
| ASTM B 878-1997 |
電氣接觸和連接件毫微秒間隙檢測的標準試驗方法 |
Standard Test Method for Nanosecond Event Detection for Electrical Contacts and Connectors |
| ASTM B 879-1997 |
鎂和鎂合金上非電解質轉換涂層的標準規范 |
Standard Practice for Applying Non-Electrolytic Conversion Coatings on Magnesium and Magnesium Alloys |
| ASTM B 88-1999 |
無縫銅水管標準規范 |
Standard Specification for Seamless Copper Water Tube |
| ASTM B 880-1998 |
鎳、鎳合金及鈷合金化學檢驗分析限值一般要求的標準規范 |
Standard Specification for General Requirements for Chemical Check Analysis Limits for Nickel, Nickel Alloys, and Cobalt Alloys |
| ASTM B 881-1998 |
鋁和鎂合金產品的標準術語 |
Standard Terminology Relating to Aluminum- and Magnesium- Alloy Products |
| ASTM B 882-1997 |
建筑上使用前生有綠銹的銅的規范 |
Specification for Pre-Patinated Copper for Architectural Applications |
| ASTM B 883-1997 |
鐵結構零件金屬注模法(MIM)標準規范 |
Standard Specification for Metal Injection Molding (MIM), Ferrous Structural Parts |
| ASTM B 884-1997 |
用于超導的鈮鈦合金坯料、棒材和桿材的標準規范 |
Standard Specification for Niobium-Titanium Alloy Billets, Bar and Rod for Superconducting Applications |
| ASTM B 885-1997 |
印刷線路板觸點上存在雜質的標準試驗方法 |
Standard Test Method for Presence of Foreign Matter on Printed Wiring Board Contacts |
| ASTM B 886-1998 |
硬質合金磁性飽和(MS)測定的標準試驗方法 |
Standard Test Methods for Determination of Magnetic Saturation (Ms) of Cemented Carbides |
| ASTM B 888-1998 |
電連接器或彈簧觸點生產用銅合金帶材的標準規范 |
Standard Specification for Copper Alloy Strip for Use in the Manufacture of Electrical Connectors or Spring Contacts |
| ASTM B 889-1998 |
實心硬鋁電線標準規范 |
Standard Specification for Solid Hard-Drawn Aluminum Wire for Electrical Purposes |
| ASTM B 890-1998 |
X射線熒光光譜法測定鎢合金和碳化鎢金屬成分的標準試驗方法 |
Standard Test Method for Determination of Metallic Constituents of Tungsten Alloys and Tungsten Hardmetals by X-Ray Fluorescence Spectrometry |
| ASTM B 891-1998 |
帶集成散熱片的無縫和焊接鈦及鈦合金冷凝器和熱交換器管的標準規范 |
Standard Specification for Seamless and Welded Titanium and Titanium Alloy Condenser and Heat Exchanger Tubes With Integral Fins |
| ASTM B 892-2001 |
壓模鑄件用鋅銅鋁合金錠標準規范 |
Standard Specification for Zinc - Copper - Aluminum in Ingot Form for Die Castings |
| ASTM B 893-1998 |
工程應用硬涂層陽極氧化規范 |
Specification for Hard-Coat Anodizing of Magnesium for Engineering Applications |
| ASTM B 894-1999 |
鋅銅鋁合金壓模鑄件標準規范 |
Standard Specification for Zinc-Copper-Aluminum Alloy Die Castings |
| ASTM B 895-1999 |
粉末冶金(P/M)不銹鋼零件/樣品通過浸入于氯化鈉溶液評定耐腐蝕性的標準試驗方法 |
Standard Test Methods for Evaluating the Corrosion Resistance of Powder Metallurgy (P/M) Stainless Steel Parts/Specimens by Immersion in a Sodium Chloride Solution |
| ASTM B 896-1999 |
評定電導體材料連接特性的標準試驗方法 |
Standard Test Methods for Evaluating Connectability Characteristics of Electrical Conductor Materials |
| ASTM B 897-1999 |
鋅及鋅合金大鑄錠的外形標準規范 |
Standard Specification for Configuration of Zinc and Zinc Alloy Jumbo Ingot |
| ASTM B 898-1999 |
活性和難溶金屬復合板標準規范 |
Standard Specification for Reactive and Refractory Metal Clad Plate |
| ASTM B 899-2001 |
有色金屬及合金的相關標準術語 |
Standard Terminology Relating to Non-ferrous Metals and Alloys |
| ASTM B 9-1990 |
青銅制電車架空線 |
Bronze Trolley Wire |
| ASTM B 90/B 90M-1998 |
鎂合金薄板和中厚板 |
Magnesium-Alloy Sheet and Plate |
| ASTM B 901-2000 |
具有單輸入端金屬線結構的壓縮圓股鋁導線的標準規范 |
Standard Specification for Compressed Round Stranded Aluminum Conductors Using Single Input Wire Construction |
| ASTM B 902-2000 |
具有單輸入端金屬線結構的硬的、半硬的或軟的壓縮圓股銅導線的標準規范 |
Standard Specification for Compressed Round Stranded Copper Conductors, Hard, Medium-Hard, or Soft Using Single Input Wire Construction |
| ASTM B 904-2000 |
電磁干擾屏蔽用自催化銅上的自催化鎳的標準規范 |
Standard Specification for Autocatalytic Nickel over Autocatalytic Copper for Electromagnetic Interference Shielding |
| ASTM B 905-2000 |
用機械化磁帶試驗評定金屬和無機覆層粘附力的標準試驗方法 |
Standard Test Methods for Assessing the Adhesion of Metallic and Inorganic Coatings by the Mechanized Tape Test |
| ASTM B 906-2000 |
壓延鎳和鎳合金板材、片材和帶材的一般要求的標準規范 |
Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip |
| ASTM B 907-2001 |
鋅、錫和鎘基焊料標準規范 |
Standard Specification for Zinc, Tin and Cadmium Base Solders |
| ASTM B 908-2000 |
鋅合金鑄錠的色碼的使用的標準規程 |
Standard Practice for the Use of Color Codes for Zinc Casting Alloy Ingot |
| ASTM B 91-1997 |
鎂合金鍛件 |
Magnesium-Alloy Forgings |
| ASTM B 915-2001 |
自清洗爐覆層的靜態耐熱性測量的標準試驗方法 |
Standard Test Method for Measuring the Static Heat Resistance of a Self-Cleaning Oven Coating |
| ASTM B 916-2001 |
金屬薄板搪瓷覆層的粘著性的標準試驗方法 |
Standard Test Method for Adherence of Porcelain Enamel Coatings to Sheet Metal |
| ASTM B 917/B 917M-2001 |
整個工藝用鋁合金鑄件的熱處理的標準實施規程 |
Standard Practice for Heat Treatment of Aluminum-Alloy Castings from All Processes |
| ASTM B 918-2001 |
鍛造鋁合金的熱處理的標準實施規程 |
Standard Practice for Heat Treatment of Wrought Aluminum Alloys |
| ASTM B 92/B 92M-2001 |
回熔用鎂錠和鎂棒標準規范 |
Standard Specification for Unalloyed Magnesium Ingot and Stick For Remelting |
| ASTM B 93/B 93M-1998 |
砂型鑄件、硬模鑄件和壓模鑄件用鎂合金錠 |
Magnesium Alloys in Ingot Form for Sand Castings, Permanent Mold Castings and Die Castings |
| ASTM B 94-1994 |
鎂合金壓模鑄造 |
Magnesium-Alloy Die Castings |
| ASTM B 96-1993 |
一般及壓力容器用銅硅合金板、薄板、帶材及軋制棒材 |
Copper-Silicon Alloy Plate, Sheet, Strip and Rolled Bar for General Purposes and Pressure Vessels |
| ASTM B 96/B 96M-2001 |
一般用途和壓力容器用銅硅合金板材、薄板、帶材和軋制棒材的標準規范 |
Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels |
| ASTM B 96M-1993 |
一般及壓力容器用銅硅合金中厚板、薄板、帶材和軋制棒材 |
Copper-Silicon Alloy Plate, Sheet, Strip and Rolled Bar for General Purposes and Pressure Vessels (Metric) |
| ASTM B 98/B 98M-1998 |
銅硅合金桿材、棒材和型材標準規范(米制) |
Standard Specification for Copper-Silicon Alloy Rod, Bar, and Shapes (Metric) |
| ASTM B 99/B 99M-2001 |
一般用途的銅硅合金線的標準規范 |
Standard Specification for Copper-Silicon Alloy Wire for General Applications |
| ASTM B 99M-1994 |
一般應用的銅硅合金線(米制)的標準規范 |
Standard Specification for Copper-Silicon Alloy Wire for General Applications (Metric) |
| ASTM B666/B666M-1996 |
鋁和鎂制品的識別標記的標準規程 |
Standard Practice for Identification Marking of Aluminum and Magnesium Products |
| ASTM C 1000-2000 |
用α光譜分析法放化測定土壤中鈾同位素的標準試驗方法 |
Standard Test Method for Radiochemical Determination of Uranium Isotopes in Soil by Alpha Spectrometry |
| ASTM C 1001-2000 |
用α光譜分析法放化測定土壤中钚的標準試驗方法 |
Standard Test Method for Radiochemical Determination of Plutonium in Soil by Alpha Spectroscopy |
| ASTM C 1002-1996 |
石膏板或金屬熟石膏基板用鉆孔鋼螺釘 |
Steel Drill Screws for the Application of Gypsum Board or Metal Plaster Bases |
| ASTM C 1003-1983 |
用校驗熱盒法測量冷氣管道管段的熱特性的試驗方法 |
Test Method for Thermal Performance of Cooling-Air Duct Sections, Using a Calibrated Hot Box |
| ASTM C 1004-1984 |
輕水堆廢燃料接收和貯存用容器 |
Matrix for LWR Spent Fuel Receiving and Storage |
| ASTM C 1005-2000 |
水硬水泥物理試驗中質量和體積測定用標準質量與稱重器具的標準規范 |
Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements |
| ASTM C 1006-1984 |
砌塊的拉裂強度的試驗方法 |
Test Method for Splitting Tensile Strength of Masonry Units |
| ASTM C 1007-2000 |
承重(橫向和軸向)鋼骨及有關附件安裝的標準規范 |
Standard Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories |
| ASTM C 1008-1999 |
燒結二氧化鈾钚丸快速反應堆燃料 |
Sintered (Uranium-Plutonium) Dioxide Pellets - Fast Reactor Fuel |
| ASTM C 1009-1996 |
核工業化學分析實驗室制訂質量保證大綱 |
Establishing a Quality Assurance Program for Analytical Chemistry Laboratories Within the Nuclear Industry |
| ASTM C 1010-1983 |
核燃料再加工設備的驗收、檢測和操作前試驗 |
Acceptance, Checkout and Pre-Operational Testing of a Nuclear Fuels Reprocessing Facility |
| ASTM C 1011-1983 |
核燃料生產中用無電極電導儀器的選擇指南或規范 |
Selection or Specification of Electrodeless Conductivity Instruments for the Nuclear Fuel Cycle |
| ASTM C 1012-1995 |
暴露在硫酸鹽溶液中的水硬水泥砌塊長度變化的試驗方法 |
Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution |
| ASTM C 1013-1994 |
膜面剛性蜂窩狀聚氨基甲酸乙酯屋面絕熱材料 |
Membrane-Faced Rigid Cellular Polyurethane Roof Insulation |
| ASTM C 1014-1999 |
噴施的礦質纖維絕熱或隔音材料 |
Spray-Applied Mineral Fiber Thermal or Acoustical Insulation |
| ASTM C 1015-1999 |
纖維素和礦物纖維松充填熱絕緣料裝配的標準規范 |
Standard Practice for Installation of Cellulosic and Mineral Fiber Loose-Fill Thermal Insulation |
| ASTM C 1016-2002 |
密封劑背襯(填縫)料吸水率測定的標準試驗方法 |
Standard Test Method for Determination of Water Absorption of Sealant Backing (Joint Filler) Material |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com