標準號 |
中文名稱 |
英文名稱 |
| ASTM D 4985-2000 |
要求預裝輔助冷卻添加劑(SCA)的重載工作發動機用低硅乙二醇基發動機冷卻劑的標準規范 |
Standard Specification for Low Silicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines Requiring a Pre-Charge of Supplemental Coolant Additive (SCA) |
| ASTM D 4986-1998 |
泡沫聚合材料水平燃燒特性的測試方法 |
Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials |
| ASTM D 4987-1999 |
一部分連續式紙張孔眼的拉伸斷裂強度的測試方法 |
Test Method for Tensile Breaking Strength of Perforations in One-Part Continuous Forms Paper |
| ASTM D 4988-1996 |
紙張中碳酸鈣含量的測試方法 |
Test Method for Determination of Calcium Carbonate Content of Paper |
| ASTM D 4989-1990 |
使用平打板塑性計對瀝青屋頂層表觀粘度流動的試驗方法 |
Test Method for the Apparent Viscosity (Flow) of Roofing Bitumens Using the Parallel Plate Plastometer |
| ASTM D 499-1969 |
白色水浮香皂 |
White Floating Toilet Soap |
| ASTM D 4990-1997 |
屋頂和防水屋頂用柏油玻璃油氈 |
Coal Tar Glass Felt Used in Roofing and Waterproofing |
| ASTM D 4991-1994 |
用真空法進行空瓶罐泄漏試驗的測試方法 |
Test Method for Leakage Testing of Empty Containers by Vacuum Method |
| ASTM D 4992-1994 |
侵蝕控制用巖石的評定 |
Evaluation of Rock to be Used for Erosion Control |
| ASTM D 4993-1989 |
為反向滲透標定二氧化硅的計算和校正 |
Calculation and Adjustment of Silica (SiO2) Scaling for Reverse Osmosis |
| ASTM D 4994-1989 |
廢水污垢中毒素的分離 |
Recovery of Viruses from Wastewater Sludges |
| ASTM D 4995-2000 |
1,1,2-三氯 1,2,2-三氟乙烷溶劑的脫脂等級和電子等級的標準規范 |
Standard Specifications for Electronic and Degreasing Grades of 1,1,2-Trichloro 1,2,2,-Trifluoroethane Solvent |
| ASTM D 4998-1995 |
評定牽引車液壓磨損特性的試驗方法 |
Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids |
| ASTM D 5-1997 |
瀝青材料的滲透性試驗方法 |
Test Method for Penetration of Bituminous Materials |
| ASTM D 50-1990 |
含鐵和錳的黃色、橙色、紅色和褐色涂料的化學分析試驗方法 |
Test Methods for Chemical Analysis of Yellow, Orange, Red and Brown Pigments Containing Iron and Manganese |
| ASTM D 500-1995 |
磺化油和硫化油的化學分析和試驗方法 |
Test Methods of Chemical Analysis of Sulfonated and Sulfated Oils |
| ASTM D 5000-1989 |
使用側流傳感器對粘土中素活性的評定 |
Evaluating Activity of Clay Elements Using a Side-Stream Sensor |
| ASTM D 5001-1990 |
用球圓柱體式(BOCLE)潤滑性評定儀測量航空渦輪機燃料潤滑性的試驗方法 |
Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE) |
| ASTM D 5002-1999 |
數字密度分析儀用原油密度和相對密度的標準試驗方法 |
Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer |
| ASTM D 5003-1995 |
石油焦的哈德格羅夫可磨性指數(HGI)的測試方法 |
Test Method for the Hardgrove Grindability Index (HGI) of Petroleum Coke |
| ASTM D 5004-1989 |
用二甲苯置換法對焙燒石油焦炭真密度的測試方法 |
Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement |
| ASTM D 5006-1996 |
測量航空燃料中燃料系統結冰抑制劑(醚型)的試驗方法 |
Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels |
| ASTM D 5007-1999 |
涂漆濕對干遮蓋變化的試驗方法 |
Test Method for Wet-to-Dry Hiding Change |
| ASTM D 5008-1997 |
用氣相色譜法對2-乙基已醇純度值和乙基甲醇戊烷含量的試驗方法 |
Test Method for Ethyl Methyl Pentanol Content and Purity Value of 2-Ethylhexanol by Gas Chromatography |
| ASTM D 5009-1996 |
實驗室條件下評估和比較傳送效率的試驗方法 |
Test Method for Evaluating and Comparing Transfer Efficiency Under Laboratory Conditions |
| ASTM D 501-1989 |
堿性洗滌劑的抽樣和化學分析試驗方法 |
Test Methods of Sampling and Chemical Analysis of Alkaline Detergents |
| ASTM D 5010-2001 |
印刷油墨及相關材料試驗的標準指南 |
Standard Guide for Testing Printing Inks and Related Materials |
| ASTM D 5011-1992 |
使用傳送標準對臭氧檢測器的校驗 |
Calibration of Ozone Monitors Using Transfer Standards |
| ASTM D 5012-1989 |
大氣濕沉積物采集和保存使用材料的制備 |
Preparation of Materials Used for the Collection and Preservation of Atmospheric Wet Deposition |
| ASTM D 5013-1989 |
管道和其他地點排放的廢棄物的取樣 |
Sampling Wastes from Pipes and Other Point Discharges |
| ASTM D 5014-1994 |
室內空氣中甲醛測量的測試方法(被動式樣法) |
Test Method for Measurement of Formaldehyde in Indoor Air (Passive Sampler Methodology) |
| ASTM D 5015-1995 |
大氣濕沉積物的樣品中PH值的電子測試方法 |
Test Method for pH of Atmospheric Wet Deposition Samples by Electrometric Determination |
| ASTM D 5016-1998 |
與紅外線吸收法一起使用的高溫試管爐燃燒法對煤和焦炭灰燼中硫的測試方法 |
Test Method for Sulfur in Ash from Coal and Coke Using High-Temperature Tube Furnace Combustion Method with Infrared Absorption |
| ASTM D 5017-1996 |
用13-碳核磁共振法測定線性低密度聚乙烯成分的試驗方法 |
Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by Carbon-13 Nuclear Magnetic Resonance |
| ASTM D 5018-1989 |
煤焦油和石油硬瀝青剪切粘度的試驗方法 |
Test Method for Shear Viscosity of Coal-Tar and Petroleum Pitches |
| ASTM D 5019-1996 |
屋頂隔層用增強非硬化聚合薄板 |
Reinforced Non-Vulcanized Polymeric Sheet Used in Roofing Membrane |
| ASTM D 502-1989 |
肥皂和其它洗滌劑粒度的試驗方法 |
Test Method for Particle Size of Soaps and Other Detergents |
| ASTM D 5021-1995 |
熱塑性高彈氯化乙烯混合物 |
Thermoplastic Elastomer-Chlorinated Ethylene Alloy (TECEA) |
| ASTM D 5022-1995 |
裝有使用前應稀釋藥物濃縮溶液的玻璃瓶和小玻璃瓶的標識 |
Identification of Vials and Ampoules Containing Concentrated Solutions of Drugs to Be Diluted Before Use |
| ASTM D 5023-1999 |
用三點彎曲法測量塑料動態力學性能的試驗方法 |
Test Method for Measuring the Dynamic Mechanical Properties of Plastics Using Three Point Bending |
| ASTM D 5024-2001 |
塑料的標準試驗方法:動力機械性能:壓縮 |
Standard Test Method for Plastics: Dynamic Mechanical Properties: In Compression |
| ASTM D 5025-1999 |
塑料材料的小刻度燃燒試驗用試驗室燃燒器 |
a Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials |
| ASTM D 5026-2001 |
塑料的標準試驗方法:動力機械性能:拉伸 |
Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension |
| ASTM D 5028-1996 |
用熱分析法擠拉樹脂固化性的試驗方法 |
Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis |
| ASTM D 5029-1998 |
活性碳中水可溶物的試驗方法 |
Test Method for Water Solubles in Activated Carbon |
| ASTM D 5030-1989 |
用測試井中水置換法對土壤和巖石密度的試驗方法 |
Test Method for Density of Soil and Rock in Place by the Water Replacement Method in a Test Pit |
| ASTM D 5031-2001 |
使用封閉碳弧光燈曝露儀對涂料及有關涂層進行試驗的標準實施規程 |
Standard Practice for Enclosed Carbon-Arc Exposure Tests of Paint and Related Coatings |
| ASTM D 5032-1997 |
用甘油溶液法保持恒定相對濕度 |
Maintaining Constant Relative Humidity by Means of Aqueous Glycerin Solutions |
| ASTM D 5033-1990 |
有關再循環塑料恰當使用標準的制定 |
the Development of Standards Relating to the Proper Use of Recycled Plastics |
| ASTM D 5034-1995 |
紡織品的延伸和斷裂力的試驗方法(織物抓樣強力試驗) |
Test Method for Breaking Force and Elongation of Textile Fabrics (Grab Test) |
| ASTM D 5035-1995 |
紡織纖維的伸長率和斷裂力的測試方法(抓損力) |
Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Force) |
| ASTM D 5036-1999 |
全粘固單層聚氯乙烯屋面板的應用 |
Application of Fully Adhered Single Ply Poly(Vinyl Chloride) Roof Sheeting |
| ASTM D 5037-1990 |
用高性能液相色譜法比較水中石油的試驗方法 |
Test Method for Comparison of Waterborne Petroleum Oils by High Performance Liquid Chromatography |
| ASTM D 5038-1994 |
紡織材料的術語 |
Terminology of Textile Conservation |
| ASTM D 5039-1997 |
紙反面識別的試驗方法 |
Test Methods for Identification of Wire Side of Paper |
| ASTM D 5040-1990 |
膠粘劑灰分的試驗方法 |
Test Methods for Ash Content of Adhesives |
| ASTM D 5041-1998 |
膠粘劑膠粘連接開裂時斷裂強度的試驗方法 |
Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Joints |
| ASTM D 5042-1990 |
評定微粒子的陰離子交換樹脂有機污染物的試驗方法 |
Test Method for Estimating the Organic Fouling of Particulate Anion Exchange Resins |
| ASTM D 5044-1997 |
橡膠化學制品的試驗方法.苯并噻唑基二硫化物中游離2-硫醇苯并噻唑 |
Test Method for Rubber Chemicals - Free 2-Mercaptobenzothiazole (MBT) in Benzothiazyl Disulfide (MBTS) |
| ASTM D 5045-1999 |
塑料材料平面應變斷裂韌性和應變能量釋放率的試驗方法 |
Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials |
| ASTM D 5046-1992 |
全交聯彈性體合金 |
Fully Crosslinked Elastomeric Alloys (FCEAs) |
| ASTM D 5047-1995 |
聚對苯二甲酸乙酯薄膜和薄板 |
Polyethylene Terephthalate Film and Sheeting |
| ASTM D 5048-1997 |
利用125mm火焰測量固態塑料比較燃燒特性和抗燒穿性的試驗方法 |
Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using 125-mm Flame |
| ASTM D 5049-1990 |
廢棄物中氰化物篩選的試驗方法 |
Test Method for the Screening of Cyanides in Waste |
| ASTM D 5050-1996 |
商業用石灰窯塵埃和硅酸鹽水泥窯塵埃 |
Commercial Use of Lime Kiln Dusts and Portland Cement Kiln Dusts |
| ASTM D 5051-1997 |
橡膠化學制品的試驗方法.苯并噻唑基二硫化物(MBTS).分析 |
Test Method for Rubber Chemicals - Benzothiazyl Disulfide (MBTS) - Assay |
| ASTM D 5052-1996 |
對皮革水蒸汽的滲透性的試驗方法 |
Test Method for Permeability of Leather to Water Vapor |
| ASTM D 5053-1995 |
皮革耐破損的試驗方法 |
Test Method for Resistance to Crocking of Leather |
| ASTM D 5054-1990 |
橡膠化學制品的試驗方法.二苯胍(DPG)和二鄰甲苯基胍(DDTG)分析 |
Test Method for Rubber Chemicals - Diphenyl Guanidine (DPG) and Di-o-tolyl-Guanidine (DOTG) Assay |
| ASTM D 5055-2000 |
預制木質I-墻筋的確定和監控結構能力的標準規范 |
Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists |
| ASTM D 5056-1996 |
用原子吸收法對石油焦炭中痕量金屬的試驗方法 |
Test Method for Trace Metals in Petroleum Coke by Atomic Absorption |
| ASTM D 5057-1990 |
廢棄物的堆積密度和篩選表觀比重的試驗方法 |
Test Method for Screening Apparent Specific Gravity and Bulk Density of Waste |
| ASTM D 5058-1990 |
廢棄物的篩選分析兼容性的試驗方法 |
Test Methods for Compatibility of Screening Analysis of Waste |
| ASTM D 5059-1998 |
X射線分光光度法對汽油中鉛含量的試驗方法 |
Test Methods for Lead in Gasoline by X-Ray Spectroscopy |
| ASTM D 5060-1995 |
用氣相色譜法測定高純度乙苯中雜質的測試方法 |
Test Method for Determining Impurities in High-Purity Ethylbenzene by Gas Chromatography |
| ASTM D 5061-1992 |
在冶金焦中用顯微術測定組織成分體積百分比的測試方法 |
Test Method for Microscopical Determination of Volume Percent of Textural Components in Metallurgical Coke |
| ASTM D 5062-1996 |
樹脂溶液稀釋度的試驗方法 |
Test Method for Resin Solution Dilutability |
| ASTM D 5064-2001 |
為評定涂料的可混用性進行碎屑試驗的標準方法 |
Standard Practice for Conducting a Patch Test to Assess Coating Compatibility |
| ASTM D 5065-2001 |
鋼表面老化涂層條件評定的標準指南 |
Standard Guide for Assessing the Condition of Aged Coatings on Steel Surfaces |
| ASTM D 5066-1991 |
在噴涂汽車涂料的生產條件下測定轉換效率的試驗方法 |
Test Method for Determination of the Transfer Efficiency Under Production Conditions for Spray Application of Automotive Paints - Weight Basis |
| ASTM D 5067-1999 |
藝術家用的水彩涂料的標準規范 |
Standard Specification for Artists Watercolor Paints |
| ASTM D 5068-1992 |
評定用漆刷的制備 |
Preparation of Paint Brushes for Evaluation |
| ASTM D 5069-1992 |
評定用漆滾子覆層的制備 |
Preparation of Paint-Roller Covers for Evaluation |
| ASTM D 5070-1990 |
用電位測量滴定法對紡織品軟化劑中合成季銨鹽的試驗方法 |
Test Method for Synthetic Quaternary Ammonium Salts in Fabric Softeners by Potentiometric Titrations |
| ASTM D 5071-1999 |
可光降解塑料曝光用且有水操作的氙弧型曝光儀的標準實施規程 |
Standard Practice for Operating Xenon ARC-Type Exposure Apparatus with Water for Exposure of Photodegradable Plastics |
| ASTM D 5072-1998 |
飲用水中氡的測試方法 |
test Method for Radon in Drinking Water |
| ASTM D 5073-1990 |
地表水深度的測量 |
Depth Measurement of Surface Water |
| ASTM D 5074-1990 |
用部分萃取法大量和微量無機成分分析的天然雜礦石沉淀物標樣的制備 |
Preparation of Natural-Matrix Sediment Reference Samples for Major and Trace Inorganic Constituents Analysis by Partial Extraction Procedures |
| ASTM D 5075-1996 |
室內空氣中煙堿的測試方法 |
Test Method for Nicotine in Indoor Air |
| ASTM D 5076-1990 |
屋頂層和防水膜中孔隙的測試方法 |
Test Method for Measuring Voids in Roofing and Waterproofing Membranes |
| ASTM D 5077-1990 |
有關靜電放電包裝材料的名詞術語 |
Terminology Relating to Electrostatic Discharge (ESD) Packaging Materials |
| ASTM D 5078-1995 |
瀝青混凝土和普通水泥凝固敷設的路面用加熱粉碎注料器 |
Crack Filler, Hot-Applied for Asphalt Concrete and Portland Cement Concrete Pavements |
| ASTM D 5079-1990 |
保存和運輸巖芯樣品 |
Preserving and Transporting Rock Core Samples |
| ASTM D 5080-2000 |
百分比壓縮的快速測量的標準試驗方法 |
Standard Test Method for Rapid Determination of Percent Compaction |
| ASTM D 5081-1990 |
集料層遮蓋性的試驗方法 |
Test Method for Aggregate Layer Hiding Power |
| ASTM D 5082-1999 |
間歇接觸聚氯乙烯屋頂?shù)膽脴藴室?guī)程 |
Standard Practice for the Application of Intermittently Attached Poly(Vinyl Chloride) Sheet Roofing |
| ASTM D 5083-1996 |
用直邊樣品對熱固增強塑料的拉伸特性的試驗方法 |
Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens |
| ASTM D 5084-1990 |
使用撓性壁滲透計測量飽和滲透性材料水壓傳導率的試驗方法 |
Test Method for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter |
| ASTM D 5085-1995 |
用化學抑制離子色譜法測定在大氣作用下潮濕沉積物中氯化物,硝酸鹽,硫酸鹽含量的測試方法 |
Test Method for the Determination of Chloride, Nitrate and Sulfate in Atmospheric Wet Deposition by Chemically Suppressed Ion Chromatography |
| ASTM D 5086-2001 |
用火焰原子吸收分光光度法測定大氣作用下濕沉積物中鈣、鎂、鉀和鈉含量的標準試驗方法 |
Standard Test Method for Determination of Calcium, Magnesium, Potassium, and Sodium in Atmospheric Wet Deposition by Flame Atomic Absorption Spectrophotometry |
| ASTM D 5087-2002 |
測定含溶劑汽車涂層釋放的和在揮發有機化合物控制裝置中可除去的揮發有機化合物總量的標準試驗方法 |
Standard Test Method for Determining Amount of Volatile Organic Compound (VOC) Released from Solventborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement) |
| ASTM D 5088-1990 |
在非放射性廢棄物場地上用現場設備的凈化 |
Decontamination of Field Equipment Used at Nonradioactive Waste Sites |
| ASTM D 5089-1995 |
有電磁電流儀的明渠水流速度測量的試驗方法 |
Test Method for Velocity Measurements of Water in Open Channels with Electromagnetic Current Meters |
| ASTM D 5103-2001 |
人造短纖維長度和長度分配的標準試驗方法(單纖維試驗) |
Standard Test Method for Length and Length Distribution of Manufactured Staple Fibers (Single-Fiber Test) |
| ASTM D 5104-1996 |
紡織纖維收縮的標準測試方法(單纖維試驗) |
Standard Test Method for Shrinkage of Textile Fibers (Single-Fiber Test) |
| ASTM D 5105-1994 |
用濃聚的自然光進行壓敏帶的加速室外風蝕 |
Performing Accelerated Outdoor Weathering of Pressure-Sensitive Tapes Using Concentrated Natural Sunlight |
| ASTM D 5106-1999 |
瀝青筑路混合物用煉鋼爐渣集料 |
Steel Slag Aggregates for Bituminous Paving Mixtures |
| ASTM D 5107-1990 |
建筑用砂巖表面清理標準的制定 |
Standarad Preparatory Surface Cleaning of Architectural Sandstone |
| ASTM D 5108-1990 |
海水中防污涂層體系有機物擴散速度的測試方法 |
Test Method for Organotin Release Rates of Antifouling Coating Systems in Sea Water |
| ASTM D 5109-1999 |
印刷線路板用銅覆層熱固層壓材料的標準試驗方法 |
Standard Test Methods for Copper-Clad Thermosetting Laminates for Printed Wiring Boards |
| ASTM D 511-1993 |
水中鈣鎂離子的測試方法 |
Test Methods for Calcium and Magnesium in Water |
| ASTM D 5110-1998 |
使用紫外光度法的臭氧轉變標準的認證和臭氧監測器的校準 |
Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry |
| ASTM D 5111-1999 |
非都市地區監測大氣沉積物的選址和取樣方法的標準指南 |
Standard Guide for Choosing Locations and Sampling Methods to Monitor Atmospheric Deposition at Non-Urban Locations |
| ASTM D 5112-1998 |
振動用試驗方法(水平方向正弦運動) |
Test Method for Vibration (Horizontal Linear Sinusoidal Motion) Test of Products |
| ASTM D 5113-1997 |
硬質細胞聚苯乙烯泡沫塑料上測定膠粘劑化學浸蝕的試驗方法 |
Test Method for Determining Adhesive Attack on Rigid Cellular Polystyrene Foam |
| ASTM D 5114-1990 |
機械浮選機中煤的實驗室試驗泡沫浮選的試驗方法 |
Test Method for Laboratory Froth Flotation of Coal in a Mechanical Cell |
| ASTM D 5115-1990 |
測定RDF的燃料質量和采集大量樣品的試驗方法 |
Test Method for Collecting Gross Samples and Determining the Fuel Quality of RDF |
| ASTM D 5116-1997 |
小型環境室室內裝修材料/產品有機物排放量測定的標準導則 |
Standard Guide for Small-Scale Environmental Chamber Determinations of Organic Emissions from Indoor Materials/Products |
| ASTM D 5117-1996 |
固體玻璃纖維增強(pultruded)器材染料穿透性的試驗方法 |
Test Method for Dye Penetration of Solid Fiberglass Reinforced Pultruded Stock |
| ASTM D 5118/D 5118M-1995 |
船舶包皮用纖維板的制造 |
Fabrication of Fiberboard Shipping Boxes |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com