標準號 |
中文名稱 |
英文名稱 |
| ANSI/ASTM A 914/A 914M-1996 |
符合限制的頂端淬火要求的鋼棒規范 |
Specification for Steel Bars Subject to Restricted End-Quench Hardenability Requirements |
| ANSI/ASTM A 919-1996 |
金屬熱處理的相關術語 |
Terminology Relating to Heat Treatment of Metals |
| ANSI/ASTM A 920-1996 |
具有機械特性的微合金熱鍛高質量鋼棒規范 |
Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties |
| ANSI/ASTM A 921/A 921M-1996 |
特殊質量微量合金熱鍛鋼棒規范.后續熱鍛件規范 |
Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging |
| ANSI/ASTM A 931-1996 |
金屬絲繩和絞線拉伸試驗的試驗方法 |
Test Method for the Tension Testing of Wire Ropes and Strand |
| ANSI/ASTM A 932-2001 |
使用萬用表法在電源頻率下測試片狀試樣非晶材料交流電磁特性的試驗方法 |
Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Sheet Specimens |
| ANSI/ASTM A 937/A 937M-2001 |
使用兩個相臨的試驗表面的絕緣涂層的層間電阻測定的試驗方法 |
Test Method for Determining Interlaminar Resistance of Insulating Coatings Using Two Adjacent Test Surfaces |
| ANSI/ASTM A 939-1996 |
圓柱體鍛件表面砂心的超聲波檢驗的試驗方法 |
Test Method for Ultrasonic Examination from Bored Surfaces of Cylindrical Forgings |
| ANSI/ASTM A 940-1996 |
渦輪轉子用的差溫?zé)崽幚碚婵仗幚砗辖痄撳懠?guī)范 |
Specification for Vacuum Treated Steel Forgings, Alloy, Differentially Heat Treated, for Turbine Rotors |
| ANSI/ASTM A 953-1996 |
奧氏體鉻鎳硅合金鋼無縫和焊接管規范 |
Specification for Austenitic Chromium-Nickel-Silicon Alloy Steel Seamless and Welded Tubing |
| ANSI/ASTM A 954-1996 |
奧氏體鉻鎳硅合金鋼無縫和焊接管規范 |
Specification for Austenitic Chromium-Nickel-Silicon Alloy Steel Seamless and Welded Pipe |
| ANSI/ASTM A 959-1998 |
鍛壓不銹鋼用特殊協調的標準級組成指南 |
Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels |
| ANSI/ASTM A 966-1996 |
用交流電流檢驗鋼鍛件磁粒的試驗方法 |
Test Method for Magnetic Particle Examination of Steel Forgings Using Alternating Current |
| ANSI/ASTM A 967-2001 |
不銹鋼部件的化學鈍化處理規范 |
Specification for Chemical Passivation Treatments for Stainless Steel Parts |
| ANSI/ASTM A 990-1998 |
防腐保壓零件特殊控制用鐵鎳鉻及鎳合金鑄件規范 |
Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure Retaining parts for Corrosive Service |
| ANSI/ASTM A 992/A 992M-2000 |
建筑物框架用結構型材鋼的規范 |
Specification for Steel for Structural Shapes Used in Building Framing |
| ANSI/ASTM A 997-1998 |
表面驗收標準鑄造的推薦規程的視覺檢驗 |
Practice for Investment Castings, Surface Acceptance Standards, Visual Examination |
| ANSI/ASTM B 114-2001 |
精確電阻和分路器用的片材的耐溫度常數的試驗方法 |
Test Method for Temperature-Resistance Constants of Sheet Materials for Shunts and Precision Resistors |
| ANSI/ASTM B 160-1999 |
鎳條和鎳棒規范 |
Specification for Nickel Rod and Bar |
| ANSI/ASTM B 162-1999 |
鎳板、薄板和帶材規范 |
Specification for Nickel Plate, Sheet, and Strip |
| ANSI/ASTM B 163-2001 |
冷凝和熱交換管用的無縫鎳和鎳合金規范 |
Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes |
| ANSI/ASTM B 165-1996 |
無縫鎳銅合金管規范 |
Specification for Nickel-Copper Alloy (UNS N04400) Seamless Pipe and Tube |
| ANSI/ASTM B 223-1996 |
恒溫雙金屬彈性模數的試驗方法.懸臂梁法 |
Test Method for Modulus of Elasticity of Thermostat Metals - Cantilever Beam Method |
| ANSI/ASTM B 237-1996 |
精煉銻規范 |
Specification for Refined Antimony |
| ANSI/ASTM B 240-2001 |
壓模鑄造的鑄錠中鋅的規范 |
Specification for Zinc Alloys in Ingot Form for Die Castings |
| ANSI/ASTM B 267-2001 |
用于線繞電阻器的線的規范 |
Specification for Wire for Use in Wire-Wound Resistors |
| ANSI/ASTM B 29-1996 |
顏料鉛規范 |
Specification for Pig Lead |
| ANSI/ASTM B 327-2001 |
用于生產鋅壓模鑄造合金的主要合金規范 |
Specification for Master Alloys Used in Making Zinc Die Casting Alloys |
| ANSI/ASTM B 344-2002 |
電氣加熱件用拉制或軋制鎳-鉻合金及鎳-鉻-鐵合金規范 |
Specification for Drawn or Rolled Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating Elements |
| ANSI/ASTM B 366-2001 |
工廠鍛壓鑷和鎳合金配件的規范 |
Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings |
| ANSI/ASTM B 39-1999 |
鎳規范 |
Specification for Nickel |
| ANSI/ASTM B 407-1996 |
鎳鐵鉻合金無縫管規范 |
Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube |
| ANSI/ASTM B 408-1996 |
鎳鐵鉻合金桿材和棒材規范 |
Specification for Nickel-Iron-Chromium Alloy Rod and Bar |
| ANSI/ASTM B 409-1996 |
鎳鐵鉻合金板、薄板和帶材規范 |
Specification for Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip |
| ANSI/ASTM B 413-1996 |
精煉銀規范 |
Specification for Refined Silver |
| ANSI/ASTM B 423-1999 |
鎳鐵鉻鉬銅合金(UNS N08825 and UNS N08221)無縫管規范 |
Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825 and UNS N08221) Seamless Pipe and Tube |
| ANSI/ASTM B 425-1999 |
鎳鐵鉻鉬銅合金(UNS N08825 and UNS N08221)桿材和棒材規范 |
Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and N08221) Rod and Bar |
| ANSI/ASTM B 435-1999 |
UNS NO6002,UNS NO6230,UNS R30556板片和帶的規范 |
Specification for UNS N06002, N06230, and UNS R30556 Plate, Sheet, and Strip |
| ANSI/ASTM B 464-1999 |
焊接的UNS NO8020、UNS NO8024和UNS NO8026合金管規范 |
Specification for Welded UNS N08020, UNS N08024, and UNS N08026 Alloy Pipe |
| ANSI/ASTM B 468-1999 |
焊接的UNS NO8020、UNS NO8024和UNS NO8026合金管規范 |
Specification for Welded UNS N08020, UNS N08024, and UNS N08026 Alloy Tubes |
| ANSI/ASTM B 471-1996 |
UNS NO8020、UNS NO8026和UNS NO8024鎳合金彈簧絲規范 |
Specification for UNS N08020, UNS N08026, and UNS N08024 Nickel Alloy Spring Wire |
| ANSI/ASTM B 473-1996 |
UNS NO8020、UNS NO8026及UNS NO8024鎳合金棒材和線材規范 |
Specification for UNS N08020, UNS N08026, and UNS N08024 Nickel Alloy Bar and Wire |
| ANSI/ASTM B 474-1999 |
電熔焊的UNS NO8020、UNS NO8026和UNS NO8024鎳合金管規范 |
Specification for Electric Fusion Welded UNS N08020, UNS N08026, and UNS N08024 Nickle Alloy Pipe |
| ANSI/ASTM B 475-1996 |
UNS NO8020、UNS NO8026及UNS NO8024鎳圓編織線規范 |
Specification for UNS N08020, UNS N08026, UNS N08024 Nickel Round Weaving Wire |
| ANSI/ASTM B 476-2001 |
鍛壓貴重金屬的一般要求規范 |
Specification for General Requirements for Wrought Precious Metal |
| ANSI/ASTM B 477-1996 |
金銀鎳電接觸合金規范 |
Specification for Gold-Silver-Nickel Electrical Contact Alloy |
| ANSI/ASTM B 512-1999 |
鎳鉻硅合金(UNS N08330)坯料和棒材規范 |
Specification for Nickel-Chromium-Silicon Alloy (UNS N08330) Billets and Bars |
| ANSI/ASTM B 514-1996 |
焊接的鎳鐵鉻合金管規范 |
Specification for Welded Nickel-Iron-Chromium Alloy Pipe |
| ANSI/ASTM B 515-1996 |
焊接的UNS NO8800、UNS N08810和UNS NO8811合金管規范 |
Specification for Welded UNS N08800, UNS N08810, and UNS N08811 Alloy Tubes |
| ANSI/ASTM B 522-2001 |
金銀鉑電氣接觸合金規范 |
Specification for Gold-Silver-Platinum Electrical Contact Alloy |
| ANSI/ASTM B 535-1999 |
鎳鐵鉻硅合金(UNS N08330 and UNS N08332)無縫管規范 |
Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and UNS N08332) Seamless Pipe |
| ANSI/ASTM B 536-1996 |
鎳鐵鉻硅合金板、薄板及帶材規范 |
Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Plate, Sheet, and Strip |
| ANSI/ASTM B 540-1996 |
鈀電接觸合金規范 |
Specification for Palladium Electrical Contact Alloy |
| ANSI/ASTM B 541-2001 |
金電氣接觸合金規范 |
Specification for Gold Electrical Contact Alloy |
| ANSI/ASTM B 542-1996 |
電觸點及其使用的術語 |
Terminology Relating to Electrical Contacts and Their Use |
| ANSI/ASTM B 561-1999 |
精煉鉑規范 |
Specification for Refined Platinum |
| ANSI/ASTM B 563-2001 |
鈀銀銅電氣接觸合金規范 |
Specification for Palladium-Silver-Copper Electrical Contact Alloy |
| ANSI/ASTM B 582-1996 |
鎳鉻鐵鉬銅合金板、薄板及帶材規范 |
Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet, and Strip |
| ANSI/ASTM B 589-1999 |
精煉鈀規范 |
Specification for Refined Palladium |
| ANSI/ASTM B 603-2001 |
電氣加熱件的拉伸或輥軋鐵鉻鋁合金規范 |
Specification for Drawn or Rolled Iron-Chromium-Aluminum Alloys for Electrical Heating Elements |
| ANSI/ASTM B 621-1996 |
鎳鐵鉻鉬合金棒材規范 |
Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Rod |
| ANSI/ASTM B 625-1999 |
UNS N08904、N08925、N08031、N08932和UNS N08926、UNS R20033板、薄板和帶材規范 |
Specification for UNS N08904, UNS N08925, UNS N08031, UNS N08932, UNS N08926 and UNS R20033 Plate, Sheet, and Strip |
| ANSI/ASTM B 626-2001 |
焊接鎳和鎳鈷合金管規范 |
Specification for Welded Nickel and Nickel-Cobalt Alloy Tube |
| ANSI/ASTM B 63-2001 |
金屬傳導電阻和接觸材料電阻的試驗方法 |
Test Method for Resistivity of Metallically Conducting Resistance and Contact Materials |
| ANSI/ASTM B 639-1996 |
高溫設備用沉積硬化含鈷合金桿材、棒材、鍛件和鍛造坯料規范 |
Specification for Precipitation Hardening Cobalt-Containing Alloys (UNS R30155 and UNS R30816) Rod, Bar, Forgings, and Forging Stock for High-Temperature Service |
| ANSI/ASTM B 649-1996 |
鎳鐵鉻鉬銅低碳合金(UNS N08904)、鎳鐵鉻鉬銅氮低碳合金(UNS N08925,UNS N08031和UNS N08926)和鉻鎳鐵氮低碳合金(UNS R20033)規范 |
Specification for Ni-Fe-Cr-Mo-Cu Low-Carbon Alloy (UNS N08904) and Ni-Fe-Cr-Mo-Cu-N Low Carbon Alloys (UNS 08925, UNS N08031, and UNS N08925) Cr-Ni-Fe-N Low Carbon (UNS R20033) |
| ANSI/ASTM B 667-1996 |
電接觸阻力測量用探頭的制造和使用實施規程 |
Practice for Construction and Use of a Probe for Measuring Electrical Contact Resistance |
| ANSI/ASTM B 669-1997 |
鍛造及壓模鑄造用鋅鋁合金鑄錠規范 |
Specification for Zinc-Aluminum Alloys in Ingot Form for Foundry and Die Castings |
| ANSI/ASTM B 670-1996 |
高溫設備用沉淀硬化鎳合金板、薄板及帶材規范 |
Specification for Precipitation-Hardening Nickel Alloy (UNS N07718) Plate, Sheet, and Strip for High-Temperature Service |
| ANSI/ASTM B 671-1999 |
精煉銥規范 |
Specification for Refined Iridium |
| ANSI/ASTM B 672-1996 |
穩定的鎳鐵鉻鉬鈮合金棒及線材規范 |
Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Bar and Wire |
| ANSI/ASTM B 673-1996 |
UNS N08904、UNS N08925及UNS N08926焊接管規范 |
Specification for UNS N08904, N08925, and N08926 Welded Pipe |
| ANSI/ASTM B 674-1996 |
UNS N08904、UNS N08925和UNS N08926焊接管規范 |
Specification for UNS N08904, N08925 and N08926 Welded Tube |
| ANSI/ASTM B 675-1996 |
UNS N08366及UNS N08367焊接管規范 |
Specification for UNS N08366 and UNS N08367 Welded Pipe |
| ANSI/ASTM B 677-1999 |
UNS N08904、N08925和N08926無縫管規范 |
Specification for UNS N08904, UNS N08925, and N08926 Seamless Pipe and Tube |
| ANSI/ASTM B 683-2001 |
純鈀電氣接觸材料規范 |
Specification for Pure Palladium Electrical Contact Material |
| ANSI/ASTM B 684-1996 |
鉑銥電接觸材料規范 |
Specification for Platinum-Iridium Electrical Contact Material |
| ANSI/ASTM B 685-2001 |
鈀銅電氣接觸材料規范 |
Specification for Palladium-Copper Electrical Contact Material |
| ANSI/ASTM B 688-1996 |
鉻鎳鉬鐵板、薄板及帶材規范 |
Specification for Chromium-Nickel-Molybdenum-Iron (UNS N08366 and UNS N08367) Plate, Sheet, and Strip |
| ANSI/ASTM B 69-2001 |
輥軋鋅的規范 |
Specification for Rolled Zinc |
| ANSI/ASTM B 690-1996 |
鐵鎳鉻鉬合金無縫管規范 |
Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS No8367) Seamless Pipe and Tube |
| ANSI/ASTM B 691-1996 |
鐵鎳鉻鉬合金條、棒及線材規范 |
Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 And UNS N08367) Rod, Bar, and Wire |
| ANSI/ASTM B 70-1990 |
電氣加熱用金屬材料的電阻和溫度變化的試驗方法 |
Test Method for Change of Resistance With Temperature of Metallic Materials for Electrical Heating |
| ANSI/ASTM B 710-1999 |
鎳鐵鉻硅合金焊接管規范 |
Specification for Nickel-Iron-Chromium Silicon-Alloy Welded Pipe |
| ANSI/ASTM B 720-1996 |
無縫UNS N08310管規范 |
Specification for Seamless UNS N08310 Tube |
| ANSI/ASTM B 725-1996 |
焊接鎳和鎳銅合金管規范 |
Specification for Welded Nickel (UNS N02200/UNS No2201) and Nickel-Copper Alloy (UNS N04400) Pipe |
| ANSI/ASTM B 726-1996 |
鎳鉻鉬鈷鎢鐵硅合金焊接管規范 |
Specification for Nickel-Chromium-Molybdenum-Colbalt- Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Tube |
| ANSI/ASTM B 730-1996 |
焊接鎳和鎳銅合金管規范 |
Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Tube |
| ANSI/ASTM B 749-1996 |
鉛和鉛合金帶材、薄板和板材產品規范 |
Specification for Lead and Lead Alloy Strip, Sheet, and Plate Products |
| ANSI/ASTM B 750-1999 |
熱浸涂層鋅5%鋁混合稀土合金(UNS Z38510)鑄錠規范 |
Specification for Zinc-5 % Aluminum-Mischmetal Alloy (UNS Z38510) in Ingot Form for Hot-Dip Coatings |
| ANSI/ASTM B 753-2001 |
恒溫組成合金規范 |
Specification for Thermostat Component Alloys |
| ANSI/ASTM B 76-2001 |
電氣加熱用的鎳鉻和鎳鉻鐵合金的加速壽命的試驗方法 |
Test Method for Accelerated Life of Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating |
| ANSI/ASTM B 77-2001 |
電氣電阻合金的熱電動力的試驗方法 |
Test Method for Thermoelectric Power of Electrical-Resistance Alloys |
| ANSI/ASTM B 78-2001 |
電氣加熱的鐵鎳鋁合金的加速壽命的試驗方法 |
Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating |
| ANSI/ASTM B 791-1997 |
鋅鋁合金鑄造和壓模鑄件規范 |
Specification for Zinc-Aluminum (Za) Alloy Foundry and Die Castings |
| ANSI/ASTM B 792-2001 |
空殼鑄造鑄錠鋅合金規范 |
Specification for Zinc Alloys in Ingot Form for Slush Casting |
| ANSI/ASTM B 793-2001 |
塑料注模和壓模鑄造鋅鑄造合金錠規范 |
Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection Molds |
| ANSI/ASTM B 794-1996 |
利用電阻測量的可分電連接器系統耐磨試驗的試驗方法 |
Test Method for Durability Wear Testing of Separable Electrical Connector Systems Using Electrical Resistance Measurements |
| ANSI/ASTM B 804-1996 |
UNS N08367和UNS N08926焊接管規范 |
Specification for UNS N08367 and UNS N08926 Welded Pipe |
| ANSI/ASTM B 805-1996 |
UNS N07716、N07725和N09777沉淀硬化鎳合金鋼棒和鋼絲規范 |
Specification for Precipitation Hardening Nickel Alloys UNS N07716, N07725 and N09777 Bar and Wire |
| ANSI/ASTM B 810-2001 |
通過銅質量的變化對大氣腐蝕試驗室校正的試驗方法 |
Test Method for Calibration of Atmospheric Corrosion Test Chambers by Change in Mass of Copper Coupons |
| ANSI/ASTM B 814-1996 |
鎳鉻鐵鉬鎢合金板、薄板和帶材規范 |
Specification for Nickel-Chromium-Iron-Molybdenum-Tungsten Alloy (UNS N06920) Plate, Sheet, and Strip |
| ANSI/ASTM B 815-1996 |
鈷鉻鎳鉬鎢合金桿規范 |
Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Rod |
| ANSI/ASTM B 826-1996 |
用電阻探頭監測大氣腐蝕試驗的試驗方法 |
Test Method for Monitoring Atmospheric Corrosion Tests by Electrical Resistance Probes |
| ANSI/ASTM B 827-1996 |
混合流動氣體(MFG)環境試驗實施規范 |
Practice for Conducting Mixed Flowing Gas (MFG) Environmental Tests |
| ANSI/ASTM B 829-1999 |
鎳和鎳合金無縫管一般要求的規范 |
Specification for General Requirements for Nickel And Nickel Alloy Seamless Pipe and Tube |
| ANSI/ASTM B 833-2001 |
熱噴涂用的鋅線規范 |
Specification for Zinc Wire for Thermal Spraying (Metallizing) |
| ANSI/ASTM B 834-1996 |
壓力強化粉末冶金鐵鎳鉻鉬和鎳鉻鉬鈳(Nb)合金管法蘭、管配件、閥門和零件規范 |
Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367) and Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625) Alloy Pipe Flanges, Fittings, Valves and Parts |
| ANSI/ASTM B 84-2001 |
精確電阻用合金線的耐溫度常數的試驗方法 |
Test Method for Temperature-Resistance Constants of Alloy Wires for Precision Resistors |
| ANSI/ASTM B 86-1998 |
鋅合金壓模鑄件規范 |
Specification for Zinc-Alloy Die Castings |
| ANSI/ASTM B 865-1996 |
沉淀硬化鎳銅鋁合金(UNS N05500)棒材、桿材、線材、鍛件和鍛坯的規范 |
Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy (UNS N05500) Bar, Rod, Wire, Forgings, and Forging Stock |
| ANSI/ASTM B 878-1997 |
電觸點和連接件毫微秒間隙檢測的試驗方法 |
Test Method for Nanosecond Event Detection for Electrical Contacts and Connectors |
| ANSI/ASTM B 885-1997 |
印制電路板上雜質存在的試驗方法 |
Test Method for Presence of Foreign Matter on Printed Wiring Board |
| ANSI/ASTM B 892-2001 |
壓模鑄造的鋅銅鋁鑄錠規范 |
Specification for Zinc-Copper-Aluminum in Ingot Form for Die Castings |
| ANSI/ASTM B 896-1999 |
電導體材料的評價連接特性的試驗方法 |
Test Method for Evaluating Connectability Characteristics of Electrical Conductor Materials |
| ANSI/ASTM B 899-2001 |
與非鐵金屬和合金有關的術語 |
Terminology Relating to Non-Ferrous Metals and Alloys |
| ANSI/ASTM B344-2002 |
電氣加熱件用拉制或軋制鎳-鉻合金及鎳-鉻-鐵合金規范 |
(Specification for Drawn or Rolled Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating Elements ) |
| ANSI/ASTM C 384-1997 |
用阻尼管法測定吸音材料的阻尼與吸音性的試驗方法 |
Test Method for Impedance and Absorption of Acoustical Materials by the Impedance Tube Method |
| ANSI/ASTM C 423-2001 |
用反彈室法對聲音吸收和聲音吸收系數的試驗方法 |
Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method |
| ANSI/ASTM C 522-1997 |
吸音材料氣流阻力的試驗方法 |
Test Method for Airflow Resistance of Acoustical Materials |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com