標準號 |
中文名稱 |
英文名稱 |
| ASTM D 5934-1996 |
用三點彎曲的裝載在控制速度下剛性和半剛性塑料樣品的彈性模量測定的標準方法 |
Standard Test Method for Determination of Modulus of elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three-Point Bending |
| ASTM D 5935-1996 |
可比較單點數據的展示和塑料獲得的標準操作 |
Standard Practice for Plastics-Acquisition and Presentation of comparable Single-Point Data |
| ASTM D 5936-1996 |
用試驗塑料的多用途試驗樣品的標準操作 |
Standard Specification for Multipurpose Test Specimens for Used Testing Plastics |
| ASTM D 5937-1996 |
制模和擠壓塑料拉伸特性的測定的標準試驗方法 |
Standard Test Method for Determination of Tensile Properties of moulding and Extrusion Plastics |
| ASTM D 5938-1996 |
塑料拉伸特性測定的一般規則的標準指南描述 |
Standard Guide Describing the General Principles for determination of Tensile Properties of Plastics |
| ASTM D 5939-1996 |
通過熱塑注模準備多用途試驗樣品棒材的標準操作 |
Standard Practice for Preparing Multipurpose Test Specimens for Bars of Thermoplastics by Injection Moulding |
| ASTM D 594-1985 |
倍半硅酸鈉 |
Sodium Sesquisilicate |
| ASTM D 5940-1996 |
通過熱塑注模準備小平板試驗樣品的標準規范 |
Standard Practice for Preparing Small Plate Test Specimens for thermoplastics by Injection Moulding |
| ASTM D 5941-1996 |
塑料沖擊強度測定的標準試驗方法 |
Standard Test Method for Determining the Izod Impact strength of Plastics |
| ASTM D 5942-1996 |
塑料擺錘沖擊強度測定的標準試驗方法 |
Standard Test Method for Determining Charpy Impact Strength of plastics |
| ASTM D 5943-1996 |
塑料柔性測定的標準試驗方法 |
Standard Test Method for Determining Flexural Properties of Plastics |
| ASTM D 5945-1996 |
負載情況下塑料和硬橡膠偏轉溫度測定的標準試驗方法 |
Standard Test Method for Determining Temperature of deflection of Plastics and Ebonite Under Load |
| ASTM D 5946-2001 |
利用水流接點角度的測量對電暈處理聚合物薄膜標準測試方法 |
Standard Test Method for Corona-Treated Polymer Films Using Water Contact Angle Measurements |
| ASTM D 5947-1996 |
固體塑料制品物理尺寸的標準試驗方法 |
Standard Test Methods for Physical Dimensions of Solid plastics Specimens |
| ASTM D 5948-1996 |
熱固性膜鑄化合物的標準規范 |
Standard Specification for Molding Compounds, Thermosetting |
| ASTM D 5949-2001 |
石油產品傾點標準試驗方法(自動調壓脈沖法) |
Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method) |
| ASTM D 595-1985 |
焦磷酸四鈉(無水) |
Tetrasodium Pyrophosphate (Anhydrous) |
| ASTM D 5950-1996 |
石油產品傾泄點標準測試方法(自動傾斜法) |
Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method) |
| ASTM D 5951-1996 |
毒性和復合質量試驗的固態廢物塑料的其它生物降解方法制備殘留固體的標準操作規程 |
Standard Practice for Preparing Residual Solids Obtained other Biodegradability Standard Methods for Plastics in Solid Waste for Toxicity and Compost Quality Testing |
| ASTM D 5952-1996 |
Legionellosis的可中斷調查和Legionellae的檢驗水系統用標準指南 |
Standard Guide for Inspecting Water Systems for Legionellae and Investigating Possible Outbreaks of Legionellosis (Legionnaires Disease or Pontiac Fever) |
| ASTM D 5953M-1996 |
利用低溫預濃縮和直接火焰檢測法測定周圍空氣中非甲烷有機化合物(NMOC)的標準測試方法(米制的) |
Standard Test Method for Determination of Non-Methane Organic Compounds (NMOC) in Ambient Air Using Cryogenic Preconcentration and Direct Flame Ionization Detection Method (Metric) |
| ASTM D 5954-1998 |
在天燃氣中貢抽樣和測量用標準試驗方法 |
Standard Test Method for Mercury Sampling and Measurement in Natural Gas |
| ASTM D 5955-1996 |
根據UVPM 和FPM對煙草煙霧環境中可呼吸的懸浮粒子的影響評定的標準測試方法 |
Standard Test Methods for Estimating Contribution of Environmental Tobacco Smoke to Respirable Suspended Particles Based on UVPM and FPM |
| ASTM D 5956-1996 |
不均一廢料的取樣策略的標準指南 |
Standard Guide for Sampling Strategies for Heterogeneous wastes |
| ASTM D 5957-1998 |
測試橫向抗洪水防水裝置用標準指南 |
Standard Guide for Flood Testing Horizontal Waterproofing Installations |
| ASTM D 5958-1999 |
油基油墨樹脂溶液配制用標準操作規程 |
Standard Practices for Preparation of Oil-Based Ink Resin Solutions |
| ASTM D 5959-1996 |
油漆刷絲分布密度的標準測試方法 |
Standard Test Method for Bulk Density of Level Paintbrush Filaments |
| ASTM D 596-2001 |
水分析結果報告的標準指南 |
Standard Guide for Reporting Results of Analysis of Water |
| ASTM D 5960-1997 |
技術級乙烯二氯化物的標準規范 |
Standard Specification for Technical Grade Ethylene dichloride |
| ASTM D 5961/D 5961M-1996 |
高聚物基塊復合板的軸承靈敏度的標準測試方法 |
Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates |
| ASTM D 5962-1996 |
評定核反應堆的 I 級去域內連續不合格涂層(油漆)標準指南 |
Standard Guide for Maintaining Unqualified Coatings (Paints) Within Level I Areas of a Nuclear Power Facility |
| ASTM D 5963-1997 |
由耐磨性橡膠制成的旋轉滾筒式研磨機的標準試驗方法 |
Standard Test Method for Rubber Property Abrasion Resistance Rotary Drum Abrader |
| ASTM D 5964-1996 |
用ASTM 2號和ASTM 3 號油代替IRM 902號和IRM 903號橡膠用實用規程 |
Standard Practice for Rubber IRM 902 and IRM 903 Replacement Oils for ASTM No. 2 and ASTM No. 3 Oils |
| ASTM D 5965-2002 |
涂層粉末比重的標準測試方法 |
Standard Test Methods for Specific Gravity of Coating Powders |
| ASTM D 5966-1999 |
評定輕型柴油發動機中滾輪從動桿防磨損用發動機油的標準試驗方法 |
Standard Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty Diesel Engine |
| ASTM D 5967-1999 |
評定T-8柴油發動機中柴油發動機油的標準試驗方法 |
Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine |
| ASTM D 5968-2001 |
評價柴油機油121鳦時耐腐蝕性的標準試驗方法 |
Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 121鳦 |
| ASTM D 5969-1996 |
稀釋合成海水環境的存在于潤滑脂防腐蝕性能的標準測試方法 |
Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments |
| ASTM D 5970-1996 |
暴露于室外的地工織物損壞的標準操作 |
Standard Practice for Deterioration of Geotextiles from outdoor Exposure |
| ASTM D 5971-2001 |
新混合配制的低強度材料抽樣的標準實施規范 |
Standard Practice for Sampling Freshly Mixed Controlled Low-Strength Material |
| ASTM D 5972-1999 |
測試航空燃料凍結點的標準試驗方法(自動相變法) |
Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method) |
| ASTM D 5973-1997 |
用于膨脹節密封的帶鋼封閉邊緣圍欄的彈性帶密封件的標準規范 |
Standard Specification for Elastomeric Strip Seals with Steel Locking Edge Rails Used in Expansion Joint Sealing |
| ASTM D 5974-1996 |
用毛細管氣相色譜法對妥爾油分級分離產品的脂肪和樹脂酸的標準試驗方法 |
Standard Test Methods for Fatty and Rosin Acids in Tall Oil fractionation Products by Capillary Gas Chromatography |
| ASTM D 5975-1996 |
通過測量氧消耗對堆肥的穩定性測定的標準試驗方法 |
Standard Test Method for Determining the Stability of Compost by Measuring Oxygen Consumption |
| ASTM D 5976-1996 |
道路建筑用 I 型高聚改良歷青水泥的標準規范 |
Standard Specification for Type I Polymer Modified Asphalt Cement for Use in Pavement Construction |
| ASTM D 5977-1996 |
橋梁和建筑物用高載旋轉球面軸承的標準規范 |
Standard Specification for High Load Rotational Spherical Bearings for Bridges and Structures |
| ASTM D 5978-1996 |
地下水探井的維修和修復的標準指南 |
Standard Guide for Maintenance and Rehabilitation of ground-Water Monitoring Wells |
| ASTM D 5979-1996 |
地下水系統概念化和特性化的標準指南 |
Standard Guide for Conceptualization and Characterization for ground-Water Systems |
| ASTM D 5980-1996 |
用于環境位點特性和探測的現有井的選擇和文件編制的標準指南 |
Standard Guide for Selection and Documentation of Existing wells for Use in Environmental Site Characterization and Monitoring |
| ASTM D 5981-1996 |
地下水流模式預測校準的標準指南 |
Standard Guide for Calibrating a Ground-Water Flow Model predication |
| ASTM D 5982-1996 |
新鮮混制的土壤-混凝土的混凝土含量測定的標準試驗方法(中立法熱) |
Standard Test Method for Determining Cement Content of fresh Soil-Cement (Heat of Neutralization Method) |
| ASTM D 5983-1997 |
汽車火花點火發動機燃料用順向混合甲基特丁基乙醚(MTBE)標準規范 |
Standard Specification for Methyl Tertiary-Butyl Ether (MTBE) for Downstream Blending for Use in Automotive Spark-Ignition Engine Fuel |
| ASTM D 5984-1997 |
利用顯色指示劑滴定法測試石油產品堿值的半定量現場試驗法的標準試驗方法 |
Standard Test Method for Semi-Quantitative Field Test Method for Base Number in Petroleum Products by Color-Indicator Titration |
| ASTM D 5985-1996 |
石油產品流點的標準試驗方法 |
Standard Test Method for Pour Point of Petroleum Products (National Method) |
| ASTM D 5986-1996 |
用氣相色譜/傅里葉轉換遠紅外線光譜對用完的汽油中C8-C12芳香族和總芳香族,甲苯,苯,氧化物測定的標準試驗方法 |
Standard Test Method for Determination of Oxygenates, Benzene, Toluene, C8 -C12 Aromatics and Total Aromatics in Finished Gasoline by Gas Chromatography/Fourier Transform Infrared Spectroscopy |
| ASTM D 5987-1996 |
水解萃取和離子選擇電極或離子色譜法對煤和焦碳總氟標準試驗方法 |
Standard Test Method for Total Fluorine in Coal and Coke by hydrolytic Extraction and Ion Selective Electrode or Ion Chromatograph Methods |
| ASTM D 5988-1996 |
用堆肥后殘留塑料材料或塑料材料油測定有氧生物降解的標準試驗方法 |
Standard Test Method for Determining Aerobic Biodegradation with oil of Plastic Materials or Residual Plastic Materials After Composting |
| ASTM D 5989-1998 |
尼龍制的擠壓和單體鑄造模型標準規范 |
Standard Specification for Extruded and Monomer Cast Shapes Made from Nylon (PA) |
| ASTM D 5990-1996 |
聚合注塑和擠壓成型材料的標準分類系統 |
Standard Classification System for Polyketone Injection and extrusion Materials (PK) |
| ASTM D 5991-1996 |
聚乙烯對酞酰小片中聚氯乙烯污染的分離和鑒定的標準操作 |
Standard Practice for Separation and Identification of Poly(Vinyl Chloride) (PVC) Contamination in Poly(Ethylene Terephthalate) (PET) Flake |
| ASTM D 5992-1996 |
使用震蕩方法的硫化橡膠和橡膠類似材料的動態試驗的標準指南 |
Standard Guide for Dynamic Testing of Vulcanized Rubber and rubber-Like Materials Using Vibratory Methods |
| ASTM D 5993-1999 |
地合成粘土襯墊每單質量測量的標準試驗方法 |
Standard Test Method for Measuring Mass Per Unit of geosynthetic Clay Liners |
| ASTM D 5994-1998 |
織物狀地幔測量芯厚度的標準試驗方法 |
Standard Test Method for Measuring Core Thickness of textured Geomembrane |
| ASTM D 5995-1998 |
冷區域環境定位特性的標準指南 |
Standard Guide for Environmental Site Characterization in cold Regions |
| ASTM D 5996-1996 |
用聯機離子色譜法測量高純度水中陰離子污染的標準測試方法 |
Standard Test Method for Measuring Anionic Contaminants in High-Purity Water by On-Line Ion Chromatography |
| ASTM D 5997-1996 |
通過紫外線,過硫酸鹽氧化作用,膜導電位檢測對水中總碳,無機碳在線監測的標準試驗方法 |
Standard Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection |
| ASTM D 5998-1996 |
注模聚乙烯造船和headage園柱模具的標準規范 |
Standard Specification for Molded Polyethylene Shipping and Headage Drums |
| ASTM D 5999-1996 |
再懸浮溶液中粘著劑無干擾的標準測試方法 |
Standard Test Method for Noninterference of Adhesives in Repulping |
| ASTM D 6-1995 |
油及瀝青混合物加熱損失試驗方法 |
Test Method for Loss on Heating of Oil and Asphaltic Compounds |
| ASTM D 600-1990 |
液體涂料催干劑 |
Liquid Paint Driers |
| ASTM D 6000-1996 |
地下水位點水層信息的標準指南 |
Standard Guide for Presentation of Water-Level Information from Ground-Water Sites |
| ASTM D 6001-1996 |
用于環境調查直接推壓水取樣的標準指南 |
Standard Guide for Direct-Push Water Sampling for nvironmental Investigations |
| ASTM D 6002-1996 |
環境降解塑料制成堆肥評估的標準指南 |
Standard Guide for Assessing the Compostability of environmentally Degradable Plastics |
| ASTM D 6003-1996 |
測定暴露于模擬城市建設固體廢料(ESW)需養堆肥環境的塑料材料重量損失的標準試驗方法 |
Standard Test Method for Determining Weight Loss From plastic Materials Exposed to Simulated Municipal Solid-Waste (MSW) Aerobic Compost Environment |
| ASTM D 6004-1996 |
測定粘結剪切強度地毯粘合劑的標準試驗方法 |
Standard Test Method for Determining Adhesive Shear Strength Carpet Adhesives |
| ASTM D 6005-1996 |
測定地毯粘結劑滑動抗性的標準試驗方法 |
Standard Test Method for Determining Slump Resistance of carpet Adhesives |
| ASTM D 6006-1997 |
液流生物降解性評估的標準指南 |
Standard Guide for Assessing Biodegradability of Hydraulic fluids |
| ASTM D 6007-1996 |
測定使用一小腔室對木制品空氣中甲醛濃度的測定 |
Standard Test Method for Determining Formaldehyde concentration in Air from Wood Products Using a Small Scale Chamber |
| ASTM D 6008-1996 |
進行環境基線調查的標準規范 |
Standard Practice for Conducting Environmental Baseline surveys |
| ASTM D 6009-1996 |
廢堆取樣的標準指南 |
Standard Guide for Sampling Waste Piles |
| ASTM D 601-1987 |
奧氣油(永久液體) |
Oiticica Oil (Permanently Liquid) |
| ASTM D 6010-1996 |
固體基質有機化合物用封閉容器微波溶劑萃取的標準操作 |
Standard Practice for Closed Vessel Microwave Solvent extraction of Organic Compounds from Solid Matrices |
| ASTM D 6011-1996 |
測定利用聲速的風速記錄儀/溫度計性能的標準試驗方法 |
Standard Test Method for Determining the Performance of a sonic Anemometer/Thermometer |
| ASTM D 6012-1996 |
測定手套皮革對流血耐受性的標準試驗方法 |
Standard Test Method for Determination of Resistance of glove Leather to Bleeding |
| ASTM D 6013-1996 |
測定皮革對洗滌的局部穩定性的標準試驗方法 |
Standard Test Method for Determination of Area Stability of leather to Laundering |
| ASTM D 6014-1996 |
皮革表面動態水吸收測定的標準試驗方法 |
Standard Test Method for Determination of Dynamic Water absorption of Leather Surfaces |
| ASTM D 6015-1996 |
皮革靜態水吸收的標準試驗方法 |
Standard Test Method for Static Water Absorption of Leather |
| ASTM D 6016-1996 |
皮革中可萃取的水,氮測定的標準方法 |
Standard Test Method for Determination of Nitrogen, Water extractable in Leather |
| ASTM D 6017-1997 |
皮革中鹽硫化鎂測定的標準試驗方法 |
Standard Test Method for determination of Magnesium Sulfate from Salt in Leather |
| ASTM D 6018-1996 |
皮革中鉛鹽測定的標準試驗方法 |
Standard Test Method for Determining the Presence of Lead salts in Leather |
| ASTM D 6019-1996 |
基本鉻鞣皮溶劑氧化鉻測定的試驗方法 |
Test Method for determination of Chromic Oxide in Basic chromium Tanning Liquors (Ammonium Persulfate Oxidation) |
| ASTM D 6020-1996 |
非金屬結合鞣皮劑和鞣皮程度計算的標準操作 |
Standard Practice for Calculation of (Non-Mineral) Combined tanning Agents and Degree of Tannage |
| ASTM D 6021-1996 |
通過復式頂端空間萃取和硫比率測定的殘留燃料總硫化氫測量的標準 試驗方法 |
Standard Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection |
| ASTM D 6022-1996 |
永久剪切穩定性檢索計算的標準操作 |
Standard Practice for Calculation of Permanent Shear Stability Index |
| ASTM D 6023-1996 |
控制低強度材料(CLSM)空氣含量,水泥含量,彎曲度,單位重量的標準試驗方法 |
Standard Test Method for Unit Weight, Yield, Cement Content, Air Content (Gravimetric) of Controlled Low Strength Material (CLSM) |
| ASTM D 6024-1996 |
所有落在控制低強度材料的測定負載應用穩定性的標準試驗方法 |
Standard Test Method for all Drop on Controlled Low strength Material (CLSM) to Determine Suitability for Load Application |
| ASTM D 6025-1996 |
發展和評估地下水模式準則的標準指南 |
Standard Guide for Developing and Evaluating Ground-Water modeling Codes |
| ASTM D 6026-1999 |
在土工學數據中使用明顯數字的標準實施規程 |
Standard Practice for Using Significant Digits in Geotechnical Data |
| ASTM D 6027-1996 |
土工技術用途的校正襯墊代替換能器的標準試驗方法 |
Standard Test Method for Calibrating Linear Displacement Transducers for Geotechnical Purposes |
| ASTM D 6028-1996 |
用改良的hantus方法對滲漏禁閉床中地下蓄水層水壓特性測定的標準試驗方法 |
Standard Test Method (Analytical Procedure) for Determining hydraulic Properties of a Confined Aquifer Taking into Consideration Storage of Water in Leaky Confining Beds by Modified Hantush Method |
| ASTM D 6029-1996 |
用Hantash-Jacob方法測定微量儲存的滲漏禁閉床中禁閉蓄水層水壓特性的標準試驗方法 |
Standard Test Method (Analytical Procedure) for Determining hydraulic Properties of a Confined Aquifer and a Leaky Confining Bed with Negligible Storage by the Hantush-Jacob Method |
| ASTM D 603-1966 |
硅酸鋁顏料(無水) |
Aluminum Silicate Pigments (Hydrous) |
| ASTM D 6030-1996 |
評價地下水或含水層敏感性和脆弱性的方法選擇標準指南 |
Standard Guide for Selection of Methods for Assessing Ground Water or Aquifer Sensitiviy and Vulnerability |
| ASTM D 6031-1996 |
在水平,傾斜和垂直通道管中用原子核法對滲出土壤和巖石的潮氣含量密度測定的標準試驗方法 |
Standard Test Method for Logging In Situ Moisture Content Density of Soil and Rock by the Nuclear Method in Horizontal, Slanted, and Vertical Access Tubes |
| ASTM D 6032-1996 |
巖石芯測定巖石質量標識的標準試驗方法 |
Standard Test Method for Determining Rock Quality Designation (RQD) of Rock Core |
| ASTM D 6033-1996 |
描述地下水成型準則功能的標準指南 |
Standard Guide for Describing the Functionality of a ground-Water Modeling Code |
| ASTM D 6034-1996 |
通過一連續比率的泵試驗對限制性含水層內生產井效率測定的標準試驗方法 |
Standard Test Method (Analytical Procedure) for Determining the Efficiency of a Production Well in a Confined Aquifer from a Constant Rate Pumping Test |
| ASTM D 6035-1996 |
使用一柔壁滲透計對壓實的或非分散性土壤樣品液體導電性凍融效果測定的標準試驗方法 |
Standard Test Method for Determining the Effect of Freeze-Thaw on Hydraulic Conductivity of Compacted or Undisturbed Soil Specimens Using a Flexible Wall Permeameter |
| ASTM D 6036-1996 |
地下水主要離子和痕量素使用地圖化學分析結果展示的標準指南 |
Standard Guide for Displaying the Results of Chemical Analysis of Ground Water for Major Ions and Trace Elements-Use of Maps |
| ASTM D 6037-1996 |
光澤涂層干磨損抗性的標準試驗方法 |
Standard Test Methods for Dry Abrasion Mar Resistance of Gloss Coatings |
| ASTM D 6038-1996 |
測定通過沉降溫度樹脂/溶劑混合物兼容性的標準試驗方法 |
Standard Test Method for Determining the Compatibility of resin/Solvent Mixtures by Precipitation Temperature |
| ASTM D 6039/D 6039M-1996 |
箱,木材,開啟和塞的標準規范 |
Standard Specification for Crates, Wood, Open and Covered |
| ASTM D 604-1981 |
硅藻土顏料 |
Diatomaceous Silica Pigment |
| ASTM D 6040-2001 |
非燒結聚四氟乙烯(PTFE)擠制薄膜或帶材的標準試驗方法的標準指南 |
Standard Guide to Standard Test Methods for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape |
| ASTM D 6041-1997 |
接觸模制(玻璃纖維增強熱固樹脂)耐磨損管和配件標準規范 |
Standard Specification for Contact-Molded (Glass-Fiber-Reinforced mosetting Resin) Corrosion Resistant Pipe and Fittings |
| ASTM D 6042-1996 |
用液相色譜對聚丙烯均聚物配方中酚醛氧化劑和酰胺纖維潤滑添加劑 |
Standard Test Method for Determination of Phenolic oxidants and Erucamide Slip Additives in Polypropylene Homopolymer Formulations Using Liquid Chromatography (LC) |
| ASTM D 6043-2001 |
永久性和耐久性美術紙選擇的標準指南 |
Standard Guide for Selection of Permanent and Durable Artists Paper |
| ASTM D 6044-1996 |
階段和污染媒介管理有代表性取樣的標準指南 |
Standard Guide for Representative Sampling for Management of stage and Contaminated Media |
| ASTM D 6045-1996 |
自動原色法對石油產品顏色的標準試驗方法 |
Standard Test Method for Color of Petroleum Products by the automatic Tristimulus Method |
| ASTM D 6046-1998 |
環境效果的液壓流體的標準分類 |
Standard Classification of Hydraulic Fluids for Environmental Impact |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com