標準號 |
中文名稱 |
英文名稱 |
| ASTM D 6283-1998 |
非包覆的起絨人造絲地板覆蓋物成簇單位長度的標準試驗方法 |
Standard Test Method for Tuft Element Length of Uncoated Pile Yarn Floor Coverings |
| ASTM D 6284-1998 |
可溶于氯和氯胺液態溶劑的橡膠性能-效果的標準試驗方法 |
Standard Test Method for Rubber Property-Effect of Aqueous Solutons with Available Chlorine and Chloramine |
| ASTM D 6285-1998 |
定位廢棄井的標準指南 |
Standard Guide for Locating Abandoned Wells |
| ASTM D 6286-1998 |
環境位點特性分析用鉆削方法選擇的標準指南 |
Standard Guide for Selection of Drilling Methods for Environmental Site Characterization |
| ASTM D 6287-1998 |
切片和壓片試驗樣品的標準操作規程 |
Standard Practice for Cutting Film and Sheeting Test Specimens |
| ASTM D 6288-1998 |
試驗前回收塑料的清洗和分離的標準操作規程 |
Standard Practice for Separation and Washing of Recycled Plastics Prior to Testing |
| ASTM D 6289-1998 |
測量由模制熱固塑料的模型尺寸收縮的標準試驗方法 |
Standard Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics |
| ASTM D 629-1999 |
紡織品定量分析試驗方法 |
Test Methods for Quantitative Analysis of Textiles |
| ASTM D 6290-1998 |
塑料小丸顏色測定的標準試驗方法 |
Standard Test Method for Color Determination of Plastic Pellets |
| ASTM D 6293-1998 |
用氣相色譜對低烯烴火花點火引擎燃料芳香碳?xì)浠衔镱?lèi)型,環烴,烯烴,石蠟和氧化物的標準試驗方法 |
Standard Test Method for Oxygenates and Paraffin, Olefin, Naphthene, Aromatic (O-PONA) Hydrocarbon Types in Low-Olefin Spark Ignition Engine Fuels by Gas Chromatography |
| ASTM D 6294-1998 |
用于屋頂和防水屋頂?shù)蔫F金屬緊固件組件的耐腐蝕性的標準試驗方法 |
Standard Test Method for Corrosion Resistance of Ferrous Metal Fastener Assemblies Used in Roofing and Waterproofing |
| ASTM D 6295/D 6295M-1998 |
輕載壓敏膜帶的非必需性的標準試驗方法 |
Standard Test Method for Dispensability of Light-Duty Pressure-Sensitive Film Tape |
| ASTM D 6296-1998 |
用多尺寸氣相色譜對火花點火發動機燃料總烯烴的標準試驗方法 |
Standard Test Method for Total Olefins in Spark-Ignition Engine Fuels by Multidimensional Gas Chromatography |
| ASTM D 6297-2001 |
橋梁瀝青塞接頭的標準規范 |
Standard Specification for Asphaltic Plug Joints for Bridges |
| ASTM D 6298-2000 |
具有工廠用金屬表面的纖維玻璃增強的苯乙烯-丁二烯-苯乙烯(SBS)改良瀝青片的標準規范 |
Standard Specification for Fiberglass Reinforced Styrene-Butadiene-Styrene (SBS) Modified Bituminous Sheet with a Factory Applied Metal Surface |
| ASTM D 6299-2000 |
分析測量系統性能評估用應用統計質量保證技術的標準實施規程 |
Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance |
| ASTM D 6300-1999 |
用于石油產品和潤滑油的試驗方法中的精密性和偏差數據測定的標準實施規程 |
Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants |
| ASTM D 6301-1998 |
水中可濾和不可濾物質樣品收集的標準操作規程 |
Standard Practice for the Collection of Samples of Filterable and Nonfilterable Matter in Water |
| ASTM D 6302-1998 |
離子交換樹脂動力行為評價的標準操作規程 |
Standard Practice for Evaluating the Kinetic Behavior of Ion Exchange Resins |
| ASTM D 6303-1998 |
水中甲醛的標準試驗方法 |
Standard Test Method for Formaldehyde in Water |
| ASTM D 6305-1998 |
火焰阻滯劑處理的膠合板屋頂蓋板計算彎曲強度設計調節因素的標準操作規程 |
Standard Practice for Calculating Bending Strength Design Adjustment Factors for Fire-Retardant-Treated Plywood Roof Sheathing |
| ASTM D 6306-1998 |
室內空氣中氣態污染物用擴散控制無源檢測器安置和使用的標準指南 |
Standard Guide for Placement and Use of Diffusion Controlled Passive Monitors for Gaseous Pollutants in Indoor Air |
| ASTM D 6307-1998 |
用點火方法對熱混合瀝青的瀝青含量的標準試驗方法 |
Standard Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method |
| ASTM D 6311-1998 |
與廢物管理活動有關的環境數據產生的標準指南:取樣設計的選擇和優化 |
Standard Guide for Generation of Environmental Data Related to Waste Management Activities: Selection and Optimization of Sampling Design |
| ASTM D 6312-1998 |
地下水探測監測程序用開發適當?shù)慕y(tǒng)計近似值的標準指南 |
Standard Guide for Developing Appropriate Statistical Approaches for Ground-Water Detection Monitoring Programs |
| ASTM D 6313-1999 |
通過氫熱解和硫特殊差別光度學對芳香化合物中總硫的試驗方法 |
Test Method for Total Sulfur in Aromatic Compounds by Hydrogenolysis and Sulfur Specific Difference Photometry |
| ASTM D 6314-1998 |
碳氟化合物全氟甲氧基樹脂(MFA)模制和擠壓材料的標準規范 |
Standard Specification for Fluorocarbon Perfluoromethoxy (MFA) Resin Molding and Extrusion Materials |
| ASTM D 6315-1998 |
駁船頂煤炭手工取樣的標準操作規程 |
Standard Practice for Manual Sampling of Coal from Tops of Barges |
| ASTM D 6316-2000 |
煤和焦炭的固體殘留物中可燃燒碳化碳總量測定的標準試驗方法 |
Standard Test Method for Determination of Total, Combustible and Carbonate Carbon in Solid Residues from Coal and Coke |
| ASTM D 6317-1998 |
通過紫外線,過硫酸鹽氧化,和膜導檢測對水中總碳,有機碳,無機碳低水平測定的標準試驗方法 |
Standard Test Method for Low Level Determination of Total Carbon, Inorganic Carbon and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection |
| ASTM D 6318-1998 |
用棒檢驗方法對回聲測深儀的標準操作規程 |
Standard Practice for Calibrating a Fathometer Using a Bar Check Method |
| ASTM D 6319-1999 |
醫用丁腈檢驗手套的標準規范 |
Standard Specification for Nitrile Examination Gloves for Medical Application |
| ASTM D 632-2001 |
氯化鈉標準規范 |
Standard Specification for Sodium Chloride |
| ASTM D 6320-1999 |
鋼制的單絲軟管增強金屬線的標準試驗方法 |
Standard Test Methods for Single Filament Hose Reinforcing Wire Made from Steel |
| ASTM D 6321-1998 |
可機洗的T恤衫評價的標準操作規程 |
Standard Practice for the Evaluation of Machine Washable T-Shirts |
| ASTM D 6323-1998 |
與廢物管理活動有關的介質的實驗室次級取樣的標準指南 |
Standard Guide for Laboratory Subsampling of Media Related to Waste Management Activities |
| ASTM D 6324-1999 |
由合成材料生產的陰莖套的標準試驗方法 |
Standard Test Method for Male Condoms Made from Synthetic Materials |
| ASTM D 6325-1998 |
測定地毯膠合鋪料粘合劑的開放裝配時間的試驗方法 |
Test Method for Determining Open Assembly Time of Carpet Mastic Adhesives |
| ASTM D 6326-1998 |
U.S.系列等動力懸浮-沉淀取樣器最大接轉速率比率和深度的選擇的標準操作規程 |
Standard Practice for The Selection of Maximum Transit-Rate Ratios and Depths for the U.S. Series of Isokinetic Suspended-Sediment Samplers |
| ASTM D 6327-1998 |
通過濾膜上活動取樣對室內空氣工作水平和氡衰減產品濃度測定的標準試驗方法 |
Standard Test Method for Determination of Radon Decay Product Concentration and Working Level in Indoor Atmospheres by Active Sampling on a Filter |
| ASTM D 6328-1998 |
大氣濕度沉淀的化學分析的質量保證協議的標準指南 |
Standard Guide for Quality Assurance Protocols for Chemical Analysis of Atmospheric Wet Deposition |
| ASTM D 6329-1998 |
使用靜態環境室支持微生物生長的室內材料能力評價方法學的開發標準指南 |
Standard Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers |
| ASTM D 633-1997 |
路用柏油的體積修正表 |
Volume Correction Table for Road Tar |
| ASTM D 6330-1998 |
在限定的試驗條件下使用小型環境室測定由木基板散發的揮發性有機化合物(甲醛除外)的標準操作規程 |
Standard Practice for Determination of Volatile Organic Compounds (Excluding Formaldehyde) Emissions from Wood-Based Panels Using Small Environmental Chambers Under Defined Test Conditions |
| ASTM D 6331-1998 |
低濃度下來源于固定源的顆粒物質質量測定的標準試驗方法(手工重量計法) |
Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method) |
| ASTM D 6332-1999 |
測量一氧化碳測量器對氣體和蒸氣的動態反應的試驗系統的標準指南 |
Standard Guide for Testing Systems for Measuring Dynamic Responses of Carbon Monoxide Detectors to Gases and Vapors |
| ASTM D 6333-1998 |
地板上可去除的殺蟲劑殘留物收集的標準操作規程 |
Standard Practice for Collection of Dislodgeable Pesticide Residues from Floors |
| ASTM D 6334-1998 |
波長分布X-射線熒光法測定汽油中硫的標準試驗方法 |
Standard Test Method for Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence |
| ASTM D 6335-1998 |
通過熱氧化發動機油模擬試驗測定高溫沉積物的標準試驗方法 |
Standard Test Method for Determination of High Temperature Deposits by Thermo-Oxidation Engine Oil Simulation Test |
| ASTM D 6336-1998 |
用真空改良的σ刀片混合物對車輛顏料濕度評價的操作規程 |
Practice for Evaluation of Vehicles for Pigment Wetting Using a Vacuum Modified sigma Blade Mixer |
| ASTM D 6337-1998 |
應用機織涂料的織物的物理特性的標準操作規程 |
Standard Practice for Physical Characterization of Woven Paint Applicator Fabrics |
| ASTM D 6338-1998 |
高交聯熱塑性硫化產品(HCTPVS)的標準分類系統 |
Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizate (HCTPVs) |
| ASTM D 6339-1998 |
間同立構聚苯乙烯模塑與擠壓(SPS)標準規范 |
Standard Specification for Syndiotactic Polystyrene Molding and Extrusion (SPS) |
| ASTM D 6340-1998 |
在含水或合成環境中測定放射性標記塑料材料的需氧生物降解性的標準試驗方法 |
Standard Test Method for Determining Aerobic Biodegradation of Radiolabeled Plastic Materials in an Aqueous or Compost Environment |
| ASTM D 6341-1998 |
測定-30到140°F(-34.4到60℃)之間塑料制材和型材線熱膨脹系數的標準試驗方法 |
Standard Test Method for Determination of the Linear Coefficient of Thermal Expansion of Plastic Lumber and Plastic Lumber Shapes Between -30 and 140&*176F (-34.4 and 60&*176C) |
| ASTM D 6342-1998 |
聚氨基甲酸乙酯原料的標準實施規范:利用近紅外譜法測定多醇中的羥基值 |
Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy |
| ASTM D 6343-1999 |
電絕緣和電介質用薄導熱固體材料的試驗方法 |
Test Methods for Thin Thermally Conductive Solid Materials for Electrical Insulation and Dielectric Applications |
| ASTM D 6344-1998 |
運輸包裝集中沖擊的標準試驗方法 |
Standard Test Method for Concentrated Impacts to Transport Packages |
| ASTM D 6345-1998 |
空氣中揮發性有機化合物活動性的集中的取樣方法選擇的標準指南 |
Standard Guide for Selection of Methods for Active, Integrative Sampling of Volatile Organic Compounds in Air |
| ASTM D 6346-1998 |
通過家庭有害廢物處理收集的驗收,隔離和包裝材料的標準指南 |
Standard Guide for Accepting, Segregating and Packaging Materials Collected Through Household Hazardous Waste Programs |
| ASTM D 6347/D 6347M-1999 |
用核反射層深度密度法測定煤體密度的標準試驗方法 |
Standard Test Method for Determination of Bulk Density of Coal Using Nuclear Backscatter Depth Density Methods |
| ASTM D 6348-1998 |
通過可提取的直接界面傅里葉轉換紅外度譜儀對氣態化合物測定的標準試驗方法 |
Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy |
| ASTM D 6349-2001 |
感應耦合等離子體-原子發散光譜法測定由煤和焦炭燃燒產生的煤、焦炭和固體殘留物中主要和次要素的標準試驗方法 |
Standard Test Method for Determination of Major and Minor Elements in Coal, Coke, and Solid Residues from Combustion of Coal and Coke by Inductively Coupled Plasma&*8212;Atomic Emission Spectrometry |
| ASTM D 635-1998 |
自承塑料在水平狀態時燃燒速率和/或燃燒蔓延程度及燃燒時間的試驗方法 |
Test Method for Rate of Burning and/or Extent and Time of Burning of Self-Supporting Plastics in a Horizontal Position |
| ASTM D 6350-1998 |
通過原子熒光光譜學對天然氣中汞的取樣和分析的標準試驗方法 |
Standard Test Method for Mercury Sampling and Analysis in Natural Gas by Atomic Fluorescence Spectroscopy |
| ASTM D 6351-1999 |
測定液壓液低溫流動性和表面特性的標準試驗方法 |
Standard Test Method for Determination of Low Temperature Fluidity and Appearance of Hydraulic Fluids |
| ASTM D 6352-1998 |
用氣相色譜法測試174℃-700℃沸騰范圍內石油餾出物沸騰范圍分布的標準試驗方法 |
Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 to 700&*176C by Gas Chromatography |
| ASTM D 6353-1998 |
鋁生產的取樣計劃和芯取樣或預制陽極用標準指南 |
Standard Guide for Sampling Plan and Core Sampling or Prebaked Anodes Used in Aluminum Production |
| ASTM D 6354-1998 |
用于鋁生產的碳陰極塊的取樣計劃和芯取樣的標準指南 |
Standard Guide for Sampling Plan and Core Sampling of Carbon Cathode Blocks Used in Aluminum Production |
| ASTM D 6355-1998 |
醫用手套人重復損害修補試驗的標準試驗方法 |
Standard Test Method for human Repeat Insult Patch Testing of Medical Gloves |
| ASTM D 6356-1998 |
用作屋頂防護涂層的鋁乳化瀝青的氫氣體產生的標準試驗方法 |
Standard Test Method for Hydrogen Gas Generation of Aluminum Emulsified Asphalt Used as a Protective Coating for Roofing |
| ASTM D 6357-2000 |
用感應耦合等離子體原子發散、感應耦合等離子質譜和石墨爐原子吸收光譜法測定由煤應用過程產生的燃燒殘留物、焦炭和煤中痕量素的試驗方法 |
Test Methods for Determination of Trace Elements in Coal, Coke, Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission, Inductively Coupled Plasma Mass, and Graphite Furnace Atomic Aborption Spectrometries |
| ASTM D 6358-1999 |
用ISO方法注塑與擠制聚苯硫材料的標準分類系統 |
Standard Classification System for Poly (Phenylene Sulfide) Injection Molding and Extrusion Materials Using ISO Methods |
| ASTM D 6359-1999 |
使用便攜式手操作裝置對新應用人行道標記的最小回射測定的標準規范 |
Standard Specification for Minimum Retroreflectance of Newly Applied Pavement Marking Using Portable Hand-Operated Instruments |
| ASTM D 6360-1999 |
塑料的閉合碳弧曝光標準實施規范 |
Standard Practice for Enclosed Carbon-Arc Exposures of Plastics |
| ASTM D 6361-1998 |
清潔劑的選擇與處理用標準指南 |
Standard Guide for Selecting Cleaning Agents and Processes |
| ASTM D 6362-1998 |
水分析參考材料合格性的標準操作規程 |
Standard Practice for Certificates of Reference Materials for Water Analysis |
| ASTM D 6363-1998 |
通過過氧化物酶熒光法對大氣水樣品中過氧化氫和結合的有機過氧化物測定的標準試驗方法 |
Standard Test Method for Determination of Hydrogen Peroxide and Combined Organic Peroxides in Atmospheric Water Samples by Peroxidase Enzyme Fluorescence Method |
| ASTM D 6364-1999 |
土工合成織物短期壓縮處理測定的標準試驗方法 |
Standard Test Method for Determining the Short-Term Compression Behavior of Geosynthetics |
| ASTM D 6365-1999 |
使用火花試驗對土工膜縫的非破壞性試驗的標準操作規程 |
Standard Practice for the Nondestructive Testing of Geomembrane Seams using the Spark Test |
| ASTM D 6366-1999 |
通過氧化燃燒和電化學檢測對液態芳香烴中總痕量氮和其衍生物測定的標準試驗方法 |
Standard Test Method for Total Trace Nitrogen and Its Derivatives in Liquid Aromatic Hydrocarbons by Oxidative Combustion and Electrochemical Detection |
| ASTM D 6367-1999 |
AMS(α-甲基苯乙烯)的標準規范 |
Standard Specification for AMS (alpha-Methylstyrene) |
| ASTM D 6368-1999 |
常規的丙基溴化物的一般級別和蒸氣脫脂級別的標準規范 |
Standard Specification for Vapor-Degreasing Grade and General Grade normal-Propyl Bromide |
| ASTM D 6370-1999 |
用熱重力法對橡膠組成分析的標準試驗方法 |
Standard Test Method for Rubber-Compositional Analysis by Thermogravimetry (TGA) |
| ASTM D 6371-1999 |
測定柴油機和加熱燃料的冷濾網淤塞點的標準試驗方法 |
Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels |
| ASTM D 6372-1999 |
微表面設計,試驗和建造的標準操作規程 |
Standard Practice for Design, Testing, and Construction of Micro-Surfacing |
| ASTM D 6373-1999 |
定級瀝青粘合劑性能的標準規范 |
Standard Specification for Performance Graded Asphalt Binder |
| ASTM D 6374-1999 |
測定綠色石油焦石英熔化過程中揮發物質的標準試驗方法 |
Standard Test Method for Volatile Matter in Green Petroleum Coke Quartz Crucible Procedure |
| ASTM D 6375-1999 |
用熱重分析儀(TGA)Noack法測定潤滑油蒸發損失的標準試驗方法 |
Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method |
| ASTM D 6376-1999 |
利用波長色散X射線熒光光譜學測定石油焦中痕量金屬的標準試驗方法 |
Standard Test Method for Determination of Trace Metals in Petroleum Coke by Wavelength Dispersive X-Ray Fluorescence Spectroscopy |
| ASTM D 6377-1999 |
測定原油蒸氣壓力的標準試驗方法:VPCRx(膨脹方法) |
Standard Test Method for Determination of Vapor Pressure of Crude Oil: VPCRx (Expansion Method) |
| ASTM D 6378-1999 |
測定石油產品、烴和烴氧化劑混合物蒸氣壓力(VPx)的標準試驗方法(三級膨脹法) |
Standard Test Method for Determination of Vapor Pressure (VPx) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method) |
| ASTM D 6379-1999 |
測定航空燃料和石油餾份中芳香烴類的標準試驗方法.帶有反射指數檢測的高效液相色譜法 |
Standard Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates-High Performance Liquid Chromatography Method with Refractive Index Detection |
| ASTM D 638-2001 |
塑料抗拉特性的標準試驗方法 |
Standard Test Method for Tensile Properties of Plastics |
| ASTM D 6380-2001 |
瀝青軋平屋頂?shù)臉?biāo)準規范(有機油毛氈) |
Standard Specification for Asphalt Roll Roofing (Organic Felt) |
| ASTM D 6381-2000 |
測量瀝青蓋屋板垂片耐機械提升性的標準試驗方法 |
Standard Test Method for Measurement of Asphalt Shingle Tab Mechanical Uplift Resistance |
| ASTM D 6382-1999 |
屋頂和防水屋頂膜材料的熱重力和動態機械分析的標準操作規程 |
Standard Practice for Dynamic Mechanical Analysis and Thermogravimetry of Roofing and Waterproofing Membrane Material |
| ASTM D 6383-1999 |
由EPDM屋頂膜材料制造的膠粘劑接頭的失效時間(蠕變破裂)的標準操作規程 |
Standard Practice for Time-to-Failure (Creep-Rupture) of Adhesive Joints Fabricated from EPDM Roof Membrane Material |
| ASTM D 6384-1999 |
潤滑劑的生物降解性和生態毒性的相關標準術語 |
Standard Terminology Relating to Biodegradability and Ecotoxicity of Lubricants |
| ASTM D 6385-1999 |
通過灰化對活性碳中酸可提取含量的標準試驗方法 |
Standard Test Method for Determining Acid Extractable Content in Activated Carbon by Ashing |
| ASTM D 6386-1999 |
鋅(熱浸鍍的)涂覆的鐵和鋼產品和用于噴涂的五金制品表面準備的標準操作規程 |
Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting |
| ASTM D 6387-1999 |
通過毛細孔氣相色譜對松節油和相關的萜烯產品的組成的標準試驗方法 |
Standard Test Methods for Composition of Turpentine and Related Terpene Products by Capillary Gas Chromatography |
| ASTM D 6388-1999 |
評價土工網耐液體化學性試驗的標準操作規程 |
Standard Practice for Tests to Evaluate the Chemical Resistance of Geonets to Liquids |
| ASTM D 6389-1999 |
評價土工織物耐液體化學性試驗的標準操作規程 |
Standard Practice for Tests to Evaluate the Chemical Resistance of Geotextiles to Liquids |
| ASTM D 638M-1996 |
塑料的抗拉特性試驗方法(米制) |
Test Method for Tensile Properties of Plastics (Metric) |
| ASTM D 6390-1999 |
在非壓實的瀝青混合物中向下排水特性測定的標準試驗方法 |
Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures |
| ASTM D 6391-1999 |
用源于一鉆孔的滲入的兩個階段對多孔材料液壓傳導性限制的現場測量的標準試驗方法 |
Standard Test Method for Field Measurement of Hydraulic Conductivity Limits of Porous Materials Using Two Stages of Infiltration from a Borehole |
| ASTM D 6393-1999 |
用承載指數對散裝固體特性的標準試驗方法 |
Standard Test Method for Bulk Solids Characterization by Carr Indices |
| ASTM D 6394-2001 |
磺基塑料(SP)的標準規范 |
Standard Specification for Sulfone Plastics (SP) |
| ASTM D 6395-1999 |
測試鋼性塑料耐平面柔性沖擊性能的標準試驗方法 |
Standard Test Method for Flatwise Flexural Impact Resistance of Rigid Plastics |
| ASTM D 6396-1999 |
測試T形管上管螺紋密封層的標準試驗方法 |
Standard Test Method for Testing of Pipe Thread Sealants on Pipe Tees |
| ASTM D 6398-2001 |
增強標簽上藥物名稱的識別的標準實施規程 |
Standard Practice to Enhance Identification of Drug Names on Labels |
| ASTM D 6399-1999 |
非行器艙中測量空氣質量的方法和儀器選擇的標準指南 |
Standard Guide for Selecting Instruments and Methods for Measuring Air Quality In Aircraft Cabins |
| ASTM D 6400-1999 |
可合成塑料的標準規范 |
Standard Specification for Compstable Plastics |
| ASTM D 6401-1999 |
植物性單寧材料提取中測定單寧和非單寧的標準試驗方法 |
Standard Test Method for Determining Non-Tannins and Tannin in Extracts of Vegetable Tanning Materials |
| ASTM D 6402-1999 |
植物性單寧材料提取中測定可溶固體和非溶解物的標準試驗方法 |
Standard Test Method for Determing Soluble Solids and Insolubles in Extracts of Vegetable Tanning Materials |
| ASTM D 6403-1999 |
原材料和用過的材料中測定潮氣的標準試驗方法 |
Standard Test Method for Determining Moisture in Raw and Spent Materials |
| ASTM D 6404-1999 |
含單寧的植物材料取樣的標準操作規程 |
Standard Practice for Sampling Vegetable Materials Containing Tannin |
| ASTM D 6405-1999 |
從原材料和用過的材料中提取單寧的標準操作規程 |
Standard Practice for Extraction of Tannins from Raw and Spent Materials |
| ASTM D 6406-1999 |
植物單寧材料中糖的分析的標準試驗方法 |
Standard Test Method for Analysis of Sugar in Vegetable Tanning Materials |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com