標準號 |
中文名稱 |
英文名稱 |
| ASTM D 3443-2000 |
三氯三氟乙烷中氯化物的標準試驗方法 |
Standard Test Method for Chloride in Trichlorotrifluoroethane |
| ASTM D 3444-2000 |
三氯三氟乙烷的酸度總值的標準試驗方法 |
Standard Test Method for Total Acid Number of Trichlorotrifluoroethane |
| ASTM D 3447-2001 |
鹵化有機溶劑純度的標準試驗方法 |
Standard Test Method for Purity of Halogenated Organic Solvents |
| ASTM D 3448-1985 |
三氯三氟乙烷的特殊水質傳導率的試驗方法 |
Test Method for Specific Aqueous Conductance of Trichlorotrifluoroethane |
| ASTM D 345-1997 |
道路和結構用氯化鈣的抽樣和測試的試驗方法 |
Test Method for Sampling and Testing Calcium Chloride for Roads and Structural Applications |
| ASTM D 3450-2000 |
內用建筑涂層可洗性的標準試驗方法 |
Standard Test Method for Washability Properties of Interior Architectural Coatings |
| ASTM D 3451-2001 |
試驗涂層粉末和粉末涂層的標準指南 |
Standard Guide for Testing Coating Powders and Powder Coatings |
| ASTM D 3452-1993 |
高溫分解氣體色層分離法鑒別橡膠的規定 |
Rubber - Identification by Pyrolysis-Gas Chromatography |
| ASTM D 3453-1996 |
家具和汽車軟墊,床墊及類似用途用軟質泡沫材料-氨基甲酸乙酯 |
Flexible Cellular Materials - Urethane for Furniture and Automotive Cushioning, Bedding and Similar Applications |
| ASTM D 3454-1997 |
水中鐳-226含量的試驗方法 |
Test Method for Radium-226 in Water |
| ASTM D 3455-1995 |
建筑材料同石油制電絕緣油的兼容性的試驗方法 |
Test Methods for Compatibility of Construction Material with Electrical Insulating Oil of Petroleum Origin |
| ASTM D 3456-1986 |
室外暴露試驗測定漆膜對微生物侵蝕敏感性的方法 |
Determining by Exterior Exposure Tests the Susceptibility of Paint Films to Microbiological Attack |
| ASTM D 3457-1987 |
氣態-液態色譜法測定脂肪酸組分,從脂肪酸制備甲基酯的試驗方法 |
Test Method for Preparation of Methyl Esters from Fatty Acids for Determination of Fatty Acid Composition by Gas-Liquid Chromatography |
| ASTM D 3458-2000 |
永久記錄用辦公復印機復制品的標準規范 |
Standard Specification for Copies from Office Copying Machines for Permanent Records |
| ASTM D 3459-1998 |
木材和木制品涂層的濕干循環的試驗方法 |
Test Method for Humid-Dry Cycling for Coatings on Wood and Wood Products |
| ASTM D 346-1990 |
實驗室分析用焦炭試樣的收集和制備 |
Collection and Preparation of Coke Samples for Laboratory Analysis |
| ASTM D 3460-1998 |
有白色水印和無水印的證券,復印機,油印機,靜電和激光復印機用按尺寸切割的辦公用紙 |
White Watermarked and Unwatermarked Bond, Mimeo, Spirit Duplicator, Xerographic and Laser Printer Cut-Sized Office Papers |
| ASTM D 3461-1997 |
硬瀝青軟化點的試驗方法(米勒杯球法) |
Test Method for Softening Point of Asphalt and Pitch (Mettler Cup-and-Ball Method) |
| ASTM D 3462-2000 |
由玻璃氈制的及表面撒礦物粉的瀝青屋面板的標準規范 |
Standard Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules |
| ASTM D 3464-1996 |
熱風風速計測量導管中的平均速率的試驗方法 |
Test Method for Average Velocity in a Duct Using a Thermal Anemometer |
| ASTM D 3465-1975 |
用氣體色譜法分析增塑劑單體的純凈度 |
Purity of Monomeric Plasticizers by Gas Chromatography |
| ASTM D 3466-1976 |
顆粒活性炭燃點的試驗方法 |
Test Method for Ignition Temperature of Granular Activated Carbon |
| ASTM D 3467-1999 |
活性碳的四氯化碳活性的試驗方法 |
Test Method for Carbon Tetrachloride Activity of Activated Carbon |
| ASTM D 3468-1999 |
層面和防水用液體氯丁橡膠及氯磺化聚乙烯規格 |
Liquid-Applied Neoprene and Chlorosulfonated Polyethylene Used in Roofing and Waterproofing |
| ASTM D 3469-1997 |
防止兒童開啟的可脫開的IIA型突耳狀閉鎖器垂直力測定的試驗方法 |
Test Methods for Measurement of Vertical Downward Forces to Disengage Type IIA Lug-Style Child-Resistant Closures |
| ASTM D 347-1997 |
雜酚油和煤焦油的體積和比重修正表 |
Tables for Volume and Specific Gravity Correction Tables for Creosote and Coal Tar |
| ASTM D 3470-1997 |
防止兒童開啟的IIA型閉鎖器可御式耳狀帶的試驗方法 |
Test Method for Measurement of Removal Lug Strippage of Type IIA Child-Resistant Closures |
| ASTM D 3472-1997 |
將防止兒童開啟的IA型關閉器反向棘爪扭矩的試驗方法 |
Test Method for Reverse-Ratchet Torque of Type IA Child-Resistant Closures |
| ASTM D 3473-1988 |
啟動某些防止兒童開啟的快速閉合蓋所需升力的試驗方法 |
Test Methods for Lifting Force Required to Remove Certain Child-Resistant Snap Caps |
| ASTM D 3474-1990 |
包裝用扭矩計校正及使用方法 |
Calibration and Use of Torque Meters Used in Packaging Applications |
| ASTM D 3475-1995 |
防止兒童開啟的包裝品的分級方法 |
Classification of Child-Resistant Packages |
| ASTM D 3477-2000 |
男人和男孩做襯衫用的機織物標準性能規范 |
Standard Performance Specification for Mens and Boys Woven Dress Shirt Fabrics |
| ASTM D 3479/D 3479M-1996 |
拉伸的測試方法.定向纖維樹脂基合成物的拉伸疲勞度 |
Test Methods for Tension-Tension Fatigue of Oriented Fiber, Resin Matrix Composites |
| ASTM D 348-2000 |
電絕緣用剛性管的標準試驗方法 |
Standard Test Methods for Rigid Tubes Used for Electrical Insulation |
| ASTM D 3480-1988 |
防止兒童開啟的快速嚙合包裝品所需開啟或使活動的拉力的試驗方法 |
Test Methods for Downward Force Required to Open or Activate Child-Resistant Snap-Engagement Packages |
| ASTM D 3481-1997 |
將防止兒童開啟的兩個同時反向運動的關閉器的兩部分分開所需力的試驗方法 |
Test Method for Shelling Two-Piece Child-Resistant Closures That Are Activated by Two Simultaneous Dissimilar Motions |
| ASTM D 3482-1990 |
測定膠粘劑對銅的電解腐蝕的試驗方法 |
Test Method for Determining Electrolytic Corrosion of Copper by Adhesives |
| ASTM D 3483-1983 |
蒸汽發生器中沉積物試驗方法 |
Test Methods for Accumulated Deposition in a Steam Generator Tube |
| ASTM D 3484-1997 |
加油溶解聚丁二烯橡膠評定的標準試驗方法 |
Standard Test Methods for Rubber-Evaluation of Oil-Extended Solution BR (Polybutadiene Rubber) |
| ASTM D 3485-1997 |
預組合電線及電纜用平滑壁螺旋形聚乙烯導管 |
Smooth-Wall Coilable Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable |
| ASTM D 3487-1988 |
電氣裝置中用礦物絕緣油 |
Mineral Insulating Oil Used in Electrical Apparatus |
| ASTM D 3489-1996 |
微孔氨基甲酸乙酯橡膠的試驗方法 |
Test Methods for Rubber - Microcellular Urethane |
| ASTM D 349-1999 |
電絕緣用層壓圓棒的試驗方法 |
Test Methods for Laminated Round Rods Used for Electrical Insulation |
| ASTM D 3490-1980 |
軟質多孔材料-結合氨基甲酸乙酯泡沫 |
Flexible Cellular Materials - Bonded Urethane Foam |
| ASTM D 3491-1992 |
硫化橡膠容器和管道內襯的試驗方法 |
Test Methods for Vulcanizable Rubber Tank and Pipe Lining |
| ASTM D 3492-1997 |
橡膠避孕套(避孕套) |
Rubber Contraceptives (Condoms) |
| ASTM D 3493-2001 |
炭黑的標準試驗方法.壓制樣品的油吸收值 |
Standard Test Method for Carbon Black - Oil Absorption Number of Compressed Sample |
| ASTM D 3494-1976 |
水乳化地板拋光劑 |
Water-Emulsion Floor Polish Remover |
| ASTM D 3495-1983 |
皮革制品中己烷萃取物的試驗方法 |
Test Method for Hexane Extraction of Leather |
| ASTM D 3496-1999 |
動態模量試驗用瀝青混合料樣品制備的方法 |
Preparation of Bituminous Mixture Specimens for Dynamic Modulus Testing |
| ASTM D 3497-1979 |
瀝青混合物動態模量的試驗方法 |
Test Method for Dynamic Modulus of Asphalt Mixtures |
| ASTM D 3498-1999 |
地板系統用膠合板與木骨架粘合用膠粘劑 |
Adhesives for Field-Gluing Plywood to Lumber Framing for Floor Systems |
| ASTM D 3499-1994 |
膠合板粘性的試驗方法 |
Test Method for Toughness of Plywood |
| ASTM D 3500-1990 |
膠合板抗拉結構的試驗方法 |
Test Methods for Structural Panels in Tension |
| ASTM D 3501-1994 |
膠合板的壓縮試驗 |
Testing Plywood in Compression |
| ASTM D 351-1997 |
天然白云母塊及薄片的目檢質量分級 |
Classification for Natural Moscovite Block Mica and Thins Based on Visual Quality |
| ASTM D 3512-1999 |
用無序轉筒起球試驗器測定紡織物表面的抗起球性及其它有關表面變化的標準試驗方法 |
Standard Test Method for Pilling Resistance and Other related Surface Changes of Textile Fabrics: Random Tumble Pilling Tester |
| ASTM D 3513-1996 |
人造短纖維中超長纖維含量的試驗方法 |
Test Method for Overlength Fiber Content of Man-Made Staple Fiber |
| ASTM D 3514-1999 |
織物抗起球性和耐其他相關表面變化的標準試驗方法:彈性浸軋法 |
Standard Test Method for Pilling Resistance and Other related Surface Changes of Textile Fabrics: Elastomeric Pad |
| ASTM D 3515-2001 |
熱攪拌熱鋪的瀝青鋪砌混合物標準規范 |
Standard Specification for Hot-Mixed, Hot-Laid Bituminous Paving Mixtures |
| ASTM D 3516-1989 |
灰分纖維素的試驗方法 |
Test Methods for Ashing Cellulose |
| ASTM D 3517-2001 |
玻璃纖維增強熱固樹脂壓力管標準規范 |
Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe |
| ASTM D 3518/D 3518M-1994 |
疊層板材拉伸試驗法測定聚合母體合成材料平面內剪切應力和應變反應性的標準實施規程 |
Standard Practice for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a +/- 45&*176 Laminate |
| ASTM D 3519-1988 |
液體介質中泡沫的測試方法(攪拌器試驗) |
Test Method for Foam in Aqueous Media (Blender Test) |
| ASTM D 352-1997 |
電絕緣用涂漿云母的試驗方法 |
Test Methods for Pasted Mica Used in Electrical Insulation |
| ASTM D 3520-1988 |
熱處理液體淬火時間的試驗方法(磁性淬火方法) |
Test Method for Quenching Time of Heat-Treating Fluids (Magnetic Quenchometer Method) |
| ASTM D 3521-1986 |
瓦楞紙板表面涂蠟的試驗方法 |
Test Method for Surface Wax Coating on Corrugated Board |
| ASTM D 3522-1986 |
瓦楞紙板表面涂蠟及浸蠟的試驗方法 |
Test Method for Applied Coating Wax and Impregnating (Saturating) Wax in Corrugated Board Facing |
| ASTM D 3523-1992 |
液體和固體的自然熱值試驗方法(差示麥克法) |
Test Method for Spontaneous Heating Values of Liquids and Solids (Differential Mackey Test) |
| ASTM D 3524-1990 |
氣相色譜法測定用過的柴油機機油中柴油燃料稀釋劑的試驗方法 |
Test Method for Diesel Fuel Diluent in Used Diesel Engine Oils by Gas Chromatography |
| ASTM D 3525-1993 |
氣相色譜法測定用過的汽油發動機機油中汽油稀釋劑的試驗方法 |
Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Gas Chromatography |
| ASTM D 3527-1995 |
汽車輪軸承潤滑脂壽命試驗方法 |
Test Method for Life Performance of Automotive Wheel Bearing Grease |
| ASTM D 3528-1996 |
用拉力負荷法測定雙搭接剪切粘結接頭的強度特性的試驗方法 |
Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading |
| ASTM D 3529/D 3529M-1997 |
碳纖維環氧樹脂預浸漬中樹脂固定含量的標準測試方法 |
Standard Test Method for Resin Solids Content of Carbon Fiber-Epoxy Prepreg |
| ASTM D 3530/D 3530M-1997 |
合成材料預浸料坯中揮發物含量的標準試驗方法 |
Standard Test Method for Volatiles Content of Composite Material Prepreg |
| ASTM D 3531-1999 |
碳纖維環氧樹脂半固化片的樹脂流動性試驗方法 |
Test Method for Resin Flow of Carbon Fiber-Epoxy Prepreg |
| ASTM D 3532-1999 |
碳纖維環氧樹脂半固化片凝固時間的試驗方法 |
Test Method for Gel Time of Carbon Fiber-Epoxy Prepreg |
| ASTM D 3533-1990 |
橡膠中氮含量的試驗 |
Testing Rubber - Nitrogen Content |
| ASTM D 3534-1985 |
水中多氯聯苯(PCBs)含量的試驗方法 |
Test Method for Polychlorinated Biphenyls (PCBs) in Water |
| ASTM D 3535-2000 |
室外潮濕條件下結構木材用膠粘劑在靜負荷下抗變形性的標準試驗方法 |
Standard Test Method for Resistance to Deformation Under Static Loading for Structural Wood Laminating Adhesives Used Under Exterior (Wet Use) Exposure Conditions |
| ASTM D 3539-1987 |
殼式薄膜蒸發計測定揮發性液體蒸發速率的試驗方法 |
Test Methods for Evaporation Rates of Volatile Liquids by Shell Thin-Film Evaporometer |
| ASTM D 3540-1990 |
合成乙酸伯戊酯(98%級) |
Primary Amyl Acetate, Synthetic (98% Grade) |
| ASTM D 3541-1991 |
2-乙基己基丙烯酸酯 |
2-Ethylhexyl Acrylate |
| ASTM D 3542-1992 |
橋用預制聚氯丁(橡膠)彈性接頭封縫件 |
Preformed Polychloroprene Elastomeric Joint Seals for Bridges |
| ASTM D 3543-1993 |
金屬滑道粘附性的試驗方法 |
Test Method for Metal Glide Adhesion |
| ASTM D 3544-1976 |
高模數纖維試驗方法和試驗結果的報告 |
Reporting Test Methods and Results on High Modulus Fibers |
| ASTM D 3545-2002 |
氣相色譜法測定乙酸酯中乙醇含量和純度的標準試驗方法 |
Standard Test Method for Alcohol Content and Purity of Acetate Esters by Gas Chromatography |
| ASTM D 3546-1990 |
冰乙酸中甲酸的試驗方法 |
Test Method for Formic Acid in Glacial Acetic Acid |
| ASTM D 3547-1991 |
丙烯酸正丁酯 |
n-Butyl Acrylate |
| ASTM D 3548-1999 |
乙烯丙烯酸 |
Ethyl Acrylate |
| ASTM D 3549-1993 |
壓實瀝青鋪面混合物樣品的厚度或高度的試驗方法 |
Test Method for Thickness or Height of Compacted Bituminous Paving Mixture Specimens |
| ASTM D 3550-2001 |
土壤的厚壁環襯分隔筒取樣的標準實施規程 |
Standard Practice for Thick Wall, Ring-Lined, Split Barrel, Drive Sampling of Soils |
| ASTM D 3551-1990 |
用機械攪拌器實驗室制備土壤-石灰石混合物的方法 |
Laboratory Preparation of Soil-Lime Mixtures Using a Mechanical Mixer |
| ASTM D 3552/D 3552M-1996 |
纖維增強金屬基質復合物的拉伸特性的試驗方法 |
Test Method for Tensile Properties of Fiber-Reinforced Metal Matrix Composites |
| ASTM D 3553-1976 |
用增強金屬基質混合物煮解法測定纖維含量的試驗方法 |
Test Method for Fiber Content by Digestion of Reinforced Metal Matrix Composites |
| ASTM D 3554-1998 |
電線及電纜用不留痕跡的黑色熱塑高密度聚乙烯絕緣材料 |
Track-Resistant Black Thermoplastic High-Density Polyethylene Insulation for Wire and Cable |
| ASTM D 3555-1998 |
電線及電纜用不留痕跡的黑色交聯聚乙烯絕緣 |
Track-Resistant Black Crosslinked Polyethylene Insulation for Wire and Cable |
| ASTM D 3556-1985 |
在機械洗碟過程中污物在玻璃器皿上沉積的試驗方法 |
Test Method for Deposition on Glassware During Mechanical Dishwashing |
| ASTM D 3557-1995 |
水中鎘含量的試驗方法 |
Test Methods for Cadmium in Water |
| ASTM D 3558-1994 |
水中鈷含量的試驗方法 |
Test Methods for Cobalt in Water |
| ASTM D 3559-1996 |
水中鉛含量的試驗方法 |
Test Methods for Lead in Water |
| ASTM D 3561-1996 |
用原子吸收分光光度法測定微咸水,海水和鹽水中鋰鉀和鈉離子含量的試驗方法 |
Test Method for Lithium, Potassium and Sodium Ions in Brackish Water, Seawater and Brines by Atomic Absorption Spectrophotometry |
| ASTM D 3562-1999 |
男人或男孩穿的機織薄大衣及外套織物的性能規格 |
Performance Specification for Mens and Boys Woven Dress Topcoat and Dress Overcoat Fabrics |
| ASTM D 3564-1995 |
保養乙烯石棉瓦或地板用地板擦亮劑規程 |
Application of Floor Polishes to Maintain Vinyl Asbestos Tile or Flooring |
| ASTM D 3565-1989 |
用機械洗碟去污劑清除餐具圖案的試驗方法 |
Test Method for Tableware Pattern Removal by Mechanical Dishwasher Detergents |
| ASTM D 3566-1996 |
橡膠.用氧燃燒法測定在氯存在時橡膠中溴含量 |
Rubber - Determination of Bromine in the Presence of Chlorine by Oxygen Combustion |
| ASTM D 3567-1997 |
增強熱固樹脂管及配件的尺寸測定規程 |
Determining Dimensions of Fiberglass (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings |
| ASTM D 3568-1998 |
橡膠用的試驗方法.EPDM(乙烯丙烯二烯三聚物)包括與油的混合物的評價 |
Test Methods for Rubber - Evaluation of EPDM (Ethylene Propylene Diene Terpolymers) Including Mixtures with Oil |
| ASTM D 3569-1995 |
硅酸鹽水泥混凝土鋪面用抗噴氣燃料的彈性型熱澆填縫密封料 |
Joint Sealant, Hot-Applied, Elastomeric, Jet-Fuel-Resistant-Type for Portland Cement Concrete Pavements |
| ASTM D 3571-1986 |
家用洗衣機和洗碗機用注水軟管 |
Consumer Product Household Laundry and Dishwasher Water Inlet Hose |
| ASTM D 3572-1986 |
家用洗衣機和洗碗機用排水軟管 |
Consumer Product Household Laundry and Dishwasher Drain Hose |
| ASTM D 3573-1986 |
家用水槽噴灑軟管 |
Consumer Product Sink Spray Hose |
| ASTM D 3574-1995 |
軟質多孔材料-扁結合的及模制的氨基甲酸乙酯泡沫的試驗方法 |
Test Methods for Flexible Cellular Materials - Slab, Bonded and Molded Urethane Foams |
| ASTM D 3575-1993 |
烯烴聚合物制軟質泡沫材料的試驗方法 |
Test Methods for Flexible Cellular Materials Made from Olefin Polymers |
| ASTM D 3576-1998 |
測定硬質泡沫塑料的孔空尺寸大小的試驗方法 |
Test Method for Cell Size of Rigid Cellular Plastics |
| ASTM D 3577-2001 |
外科用橡膠手套的標準規范 |
Standard Specification for Rubber Surgical Gloves |
| ASTM D 3577a-2001 |
外科用橡膠手套的標準規范 |
Standard Specification for Rubber Surgical Gloves |
| ASTM D 3578-2001 |
橡膠檢查手套的標準規范 |
Standard Specification for Rubber Examination Gloves |
| ASTM D 3578a-2001 |
檢查用橡膠手套的標準規范 |
Standard Specification for Rubber Examination Gloves |
| ASTM D 3579-1977 |
彭羅斯型外科用橡皮引流管 |
Rubber Surgical Drainage Tubes, Penrose-Type |