標準號 |
中文名稱 |
英文名稱 |
| ANSI/ASTM D4048-2002 |
用銅帶生銹試驗檢測潤滑油對銅腐蝕的方法 |
(Method for Detection of Copper Corrosion from Lubricating Grease by the Copper Strip Tarnish Test (05.02) ) |
| ANSI/ASTM D4055-2002 |
薄膜過濾法測定戊烷不溶性 |
(Pentane Insolubles by Membrane Filtration (05.02) ) |
| ANSI/ASTM D4055-2004 |
薄膜過濾法測定戊烷不溶物 |
|
| ANSI/ASTM D4127-2002 |
用于離子選擇電極的術語 |
(Terminology Used with Ion-Selective Electrodes ) |
| ANSI/ASTM D4171-2004 |
燃料系統防凍劑規范 |
|
| ANSI/ASTM D4175-2002 |
石油、石油產品和潤滑脂相關術語 |
(Petroleum, Petroleum Products, and Lubricants, Terminology Relating to (05.03) ) |
| ANSI/ASTM D4176-2002 |
蒸餾燃料中游離水和粒子污染物的試驗方法(清潔和透明通過/停止程序) |
(Test Method for Free Water and Particulate Contamination in Distillate Fuels (Clear and Bright Pass/Fail Proceedings) (05.02) ) |
| ANSI/ASTM D4190-2003 |
用直流氬等離子體原子發射光譜法測定水中素的試驗方法 |
(Test Method for Elements in Water by Direct-Current Argon Plasma Atomic Emission Spectroscopy ) |
| ANSI/ASTM D4191-2003 |
原子吸收分光光度法測定水中鈉含量的試驗方法 |
(Test Method for Sodium in Water by Atomic Absorption Spectrophotometry ) |
| ANSI/ASTM D4192-2003 |
原子吸收分光光度法測定水中鉀含量的試驗方法 |
(Test Method for Potassium in Water by Atomic Absorption Spectrophotometry ) |
| ANSI/ASTM D4193-2002 |
水中氰硫基的試驗方法 |
(Test Method for Thiocyanate in Water ) |
| ANSI/ASTM D4216-2003 |
剛性聚氯乙烯(PVC)和氯化聚氯乙烯建筑產品組件規范 |
(Specification for Rigid Poly (Vinyl Chloride) (PVC) and Chlorinated Poly (Vinyl Chloride) (CPVC) Building Products Compounds ) |
| ANSI/ASTM D4245-2002 |
90℃干/75℃濕操作的電線和電纜的耐臭氧熱塑性合成橡膠絕緣規范 |
(Specification for Ozone-Resistant Thermoplastic Elastomer Insulation for Wire and Cable 90oC Dry/75oC Wet Operation ) |
| ANSI/ASTM D4246-2002 |
90℃操作的電線和電纜的耐臭氧熱塑性合成橡膠絕緣的規范 |
(Specification for Ozone-Resistant Thermoplastic Elastomer Insulation for Wire and Cable, 90oC Operation ) |
| ANSI/ASTM D4282-2002 |
用微型擴散法測定水和污水中游離氰化物含量的試驗方法 |
(Test Method for Determination of Free Cyanide in Water and Wastewater by Microdiffusion ) |
| ANSI/ASTM D4289-2003 |
潤滑脂與彈性體兼容性的試驗方法 |
(Method of Testing Compatibility of Lubricating Grease with Elastomers (05.02) ) |
| ANSI/ASTM D4290-2002 |
加速狀態下測定汽車輪軸承脂漏泄傾向的試驗方法 |
(Determining the Leakage Tendencies of Automotive Wheel Bearing Grease Under Accelerated Conditions, Method of Test for (05.02) ) |
| ANSI/ASTM D4294-2004 |
用非色散X射線熒光光譜法測定石油產品中硫含量的試驗方法 |
|
| ANSI/ASTM D4294-2004 |
用非色散X射線熒光光譜法測定石油產品中硫含量的試驗方法 |
(Sulfur in Petroleum Products by Non-Dispersive X-Ray Fluorescence Spectrometry, Method of Test for (05.02) ) |
| ANSI/ASTM D4309-2002 |
為測定水中總金屬含量而使用密閉容器微波加熱技術分解樣品的實施規范 |
(Practice for Sample Digestion Using Closed Vessel Microwave Heating Technique for the Determination of Total Metals in Water ) |
| ANSI/ASTM D4310-2003 |
抗氧化劑油生成油泥和腐蝕趨勢測定的試驗方法 |
(Test Methods for Determination of the Sludging and Corrosion Tendencies of Inhibited Mineral Oils ) |
| ANSI/ASTM D4325-2002 |
非金屬半導電和電絕緣膠帶的試驗方法 |
(Test Methods for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes ) |
| ANSI/ASTM D4327-2003 |
用化學壓縮離子色譜法測定水中陰離子的試驗方法 |
(Test Method for Anions in Water by Chemically Suppressed Ion Chromatography ) |
| ANSI/ASTM D4328-2003 |
微咸水、海水及鹽水中硫酸鋇、硫酸鍶和無水硫酸鈣(石膏)超飽和度計算的實施規程 |
(Practice for Calculation of Supersaturation of Barium Sulfate, Strontium Sulfate, and Calcium Sulfate Dihydrate (Gypsum) in Brackish Water, Seawater, and Brines ) |
| ANSI/ASTM D4378-2003 |
蒸汽和燃?xì)廨啓C用礦物質潤滑油在運行中的監測 |
(In-Service Monitoring of Mineral Turbine Oils for Steam and Gas Turbines (05.02) ) |
| ANSI/ASTM D4388-2002 |
非金屬半導電和電絕緣膠帶的規范 |
(Specification for Nonmetallic Semi-Conducting and Electrically Insulating Tapes ) |
| ANSI/ASTM D4398-2002 |
決定單側面曝光纖維玻璃增強熱固樹脂抗化學性的測試方法(08.04) |
(Test Method for Determining the Chemical Resistance of Fiberglass-Reinforced Thermosetting Resins by One-Side Pane Exposure (08.04) ) |
| ANSI/ASTM D4410-2003 |
河流泥沙術語 |
(Terminology for Fluvial Sediment ) |
| ANSI/ASTM D4411-2003 |
運動中河流泥沙的抽樣指南 |
(Guide for Sampling Fluvial Sediment in Motion ) |
| ANSI/ASTM D4422-2004 |
石油焦炭分析中灰分的試驗方法 |
|
| ANSI/ASTM D4422-2004 |
石油焦炭分析中灰分的試驗方法 |
(Test Method for Ash in Analysis of Petroleum Coke (05.02) ) |
| ANSI/ASTM D445-2003 |
透明和不透明液體運動粘度的試驗方法(和動粘度的計算) |
(Kinematic Viscosity of Transparent and Opaque Liquids (and the Calculation of Dynamic Viscosity), Method of Test for (05.01) (10.03) ) |
| ANSI/ASTM D445-2004 |
透明和不透明液體運動粘度的試驗方法(和動粘度的計算) |
|
| ANSI/ASTM D4453-2002 |
超純水樣品搬運的實施規程 |
(Practice for Handling of Ultra-Pure Water Samples ) |
| ANSI/ASTM D4485-2004 |
機油的性能規范 |
|
| ANSI/ASTM D4485-2004 |
機油的性能規范 |
(Specification for Performance of Engine Oils ) |
| ANSI/ASTM D4485-2005 |
發動機油的性能規范 |
|
| ANSI/ASTM D4517-2004 |
用無焰原子吸收光譜法測量高純度水中低級硅總量的試驗方法 |
|
| ANSI/ASTM D4520-2004 |
通過使用現場灌注法測定水注入能力的實施規程 |
|
| ANSI/ASTM D4529-2002 |
評定航空燃料燃燒凈熱值的測試方法 |
(Estimation of Net Heat of Combustion of Aviation Fuels, Test Method for (05.02) ) |
| ANSI/ASTM D4530-2003 |
石油產品的微粒碳?xì)埩袅康脑囼灧椒?/td>
| (Micro Carbon Residue of Petroleum Products, Test Method for (05.02) ) |
| ANSI/ASTM D4539-2003 |
通過低溫流動試驗對柴油燃料的可濾性的試驗方法 |
(Test Method for Filterability of Diesel Fuels by the Low Temperature Flow Test (Lift) Method (05.02) ) |
| ANSI/ASTM D4603-2003 |
測定聚對苯二甲酸乙二醇酯的固有粘度的測試方法 |
(Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer ) |
| ANSI/ASTM D4617-2003 |
苯酚化合物(PF)規范 |
(Specification for Phenolic Compounds (PF) ) |
| ANSI/ASTM D4625-2004 |
43℃(110°F)時餾出燃料存儲穩定性的試驗方法 |
(Test Method for Distillate Fuel Storage Stability at 43C (110F) ) |
| ANSI/ASTM D4625a-2004 |
43C(110F)時餾出燃料儲存穩定性的試驗方法 |
|
| ANSI/ASTM D4628-2002 |
利用原子吸收光譜學分析報廢的潤滑油中鋇、鈣、錳和鋅的試驗方法 |
(Analysis of Barium, Calcium, Magnesium, and Zinc in Unused Lubricating Oils by Atomic Absorption Spectrometry, Method for (05.02) ) |
| ANSI/ASTM D4629-2002 |
用氧化燃燒和化學發光檢測法對液態石油烴中有機痕量氮的測試方法 |
(Test Method for Organically Bound Trace Nitrogen in Liquid Petroleum Hydrocarbons by Oxidative Combustion and Chemiluminescence Detection (05.02) ) |
| ANSI/ASTM D4638-2004 |
無機化學分析用生物樣品制備指南 |
|
| ANSI/ASTM D4658-2003 |
水中亞硫酸鹽離子的試驗方法 |
(Test Method for Sulfide Ion in Water ) |
| ANSI/ASTM D4683-2004 |
在高溫和高剪切率下用錐形承載模擬器測量粘度的標準試驗方法 |
|
| ANSI/ASTM D4684a-2002 |
低溫下機油表觀粘度和屈服應力測定的試驗方法 |
(Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature (05.03) ) |
| ANSI/ASTM D4691-2002 |
采用火燃原子吸收光譜計量法測量水中素的規程 |
(Practice for Measuring Elements in Water by Flame Atomic Absorption Spectrophotometry ) |
| ANSI/ASTM D4693-2004 |
潤滑脂潤滑的車輪軸承低溫扭矩的試驗方法 |
|
| ANSI/ASTM D4726-2002 |
組裝門和窗戶用擠壓剛性聚氯乙烯外型材規范 |
(White Rigid Poly (Vinyl Chloride) Exterior-Profile Extrusions Used for Assembled Windows and Doors, Specification for (08.04) ) |
| ANSI/ASTM D473-2002 |
萃取原油和燃料油中沉淀物的試驗方法(05.01) |
(Sediment in Crude and Fuel Oils by Extraction, Method of Test for (05.01) ) |
| ANSI/ASTM D4730-2002 |
電信電線和電纜用浸漬化合物規范 |
(Specification for Flooding Compounds for Telecommunications Wire and Cable ) |
| ANSI/ASTM D4731-2002 |
電信電線和電纜用熱充填化合物規范 |
(Specification for Hot-Application Filling Compounds for Telecommunications Wire and Cable ) |
| ANSI/ASTM D4732-2002 |
電信電線和電纜用冷充填化合物規范 |
(Specification for Cool-Application Filling Compounds for Telecommunications Wire and Cable ) |
| ANSI/ASTM D4737-2003 |
用四種不同方程式計算十六烷指數的試驗方法 |
(Test Method for Calculated Centane Index by Four Variable Equation ) |
| ANSI/ASTM D4739-2002 |
用電勢滴定法測定堿值的試驗方法 |
(Test Method for Base Number Determination by Potentiometric Titration (05.03) ) |
| ANSI/ASTM D4740-2002 |
通過點試驗對殘余燃料相容性和清潔性的試驗方法 |
(Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test ) |
| ANSI/ASTM D4740-2004 |
通過點滴試驗對殘余燃料相容性和清潔性的試驗方法 |
|
| ANSI/ASTM D4742a-2002 |
用氧化薄膜吸收法進行汽車發動機油氧化穩定性的試驗方法 |
(Oxidation Stability of Gasoline Automotive Engine Oils by Thin-Film Oxygen Uptake (TFOUT), Test Method for (05.03) ) |
| ANSI/ASTM D4756-2003 |
硬質聚氯乙烯側板和底板安裝的實施規范 |
(Practice for Installation of Rigid Poly (Vinyl Chloride) (PVC) Siding and Soffit (08.04) ) |
| ANSI/ASTM D4806-2003 |
用作機動車火花點燃式發動機燃料的混有汽油的變性燃料酒精的規范 |
(Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-ignition Engine Fuel ) |
| ANSI/ASTM D4806-2004 |
用作機動車火花點燃式發動機燃料的混有汽油的變性燃料酒精的規范 |
|
| ANSI/ASTM D4814-2004 |
汽車火花點燃式發動機燃料規范 |
(Specification for Automotive Spark-Ignition Engine Fuel ) |
| ANSI/ASTM D4815-2003 |
用氣相色譜法分析汽油中C1到C4類醇和甲基叔丁基醚的試驗方法 |
(Analysis of C1 to C4 Alcohols and MTBE in Gasoline by Gas Chromatography, Test Method for (05.03) ) |
| ANSI/ASTM D482-2002 |
石油產品中灰分的試驗方法 |
(Test Method for Ash from Petroleum Products (05.01) ) |
| ANSI/ASTM D483-2004 |
石油制植物噴灑油不磺化殘渣的試驗方法 |
|
| ANSI/ASTM D4839-2003 |
用紫外線法或過硫酸鹽氧化法或同時使用兩種方法以及紅外線法檢測水中總碳和有機碳的試驗方法 |
(Test Method for Total Carbon and Organic Carbon in Water by Ultraviolet, or Persulfate Oxifdation, or Both, and Infrared Detection ) |
| ANSI/ASTM D4857-2004 |
令二沖程循環汽油發動機(外側發動機除外)中活塞環結膠和活塞沉積物最小化的潤滑劑作用的測定 |
|
| ANSI/ASTM D4857-2004 |
令二沖程循環汽油發動機(外側發動機除外)中活塞環結膠和活塞沉積物最小化的潤滑劑作用的測定 |
(Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards, Test Method for (05.03) ) |
| ANSI/ASTM D4858-2002 |
促使兩沖程汽油發動機過早點火的傾向(潤滑劑)的測定方法 |
(Determination of the Tendency of Lubricants to Promote Preignition in Two-Stroke-Cycle Gasoline Engines, Test Method for (05.03) ) |
| ANSI/ASTM D4863-2002 |
兩沖程汽油發動機潤滑劑潤滑性的測定 |
(Determination of the Lubricity of Two-Stroke Cycle Gasoline Engine Lubricants (05.03) ) |
| ANSI/ASTM D4870-2004 |
剩余燃料中沉積物總量的試驗方法 |
|
| ANSI/ASTM D4927-2002 |
潤滑劑和添加料的素分析試驗方法.用波長色散X射線熒光分析法測定鋇、鈣、磷、硫和鋅 |
(Test Methods for Elemental Analysis of Lubricant and Additive Components - Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence (05.02) ) |
| ANSI/ASTM D4927-2005 |
潤滑劑和添加料的素分析試驗方法.用波長色散X射線熒光分析法測定鋇、鈣、磷、硫和鋅(05.02) |
|
| ANSI/ASTM D4951-2002 |
用感應耦合等離子體原子發射光譜法測定潤滑油中添加因子的試驗方法 |
(Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (05.03) ) |
| ANSI/ASTM D4952-2002 |
燃料和溶劑中活性硫的定量分析試驗方法 |
(Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test) (05.03) ) |
| ANSI/ASTM D4962-2002 |
水的 NAI (T1)γ射線能譜測定實施規程 |
(Practice for NAI (T1) Gamma-Ray Spectrometry of Water ) |
| ANSI/ASTM D5001-2004 |
用汽缸上球式(BOCLE)潤滑性評定儀測量航空渦輪機燃料潤滑性的試驗方法 |
|
| ANSI/ASTM D5006-2002 |
測定航空燃料中燃料系統結冰抑制劑(醚型)試驗方法 |
(Test Method for Determination of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels (05.03) ) |
| ANSI/ASTM D5006-2004 |
測定航空燃料中燃料系統防凍劑(醚型)的試驗方法 |
|
| ANSI/ASTM D5032-2003 |
用含水甘油溶液維護恒定相對濕度的實施規程 |
(Practice for Maintaining Constant Relative Humidity by Means of Aqueous Glycerin Solutions ) |
| ANSI/ASTM D5048-2003 |
利用125-mm 火焰測量法比較固體塑料的燃燒特性和抗燃特性的試驗方法 |
(Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using 125-mm Flame ) |
| ANSI/ASTM D5056-2002 |
用原子吸收法測量石油焦炭中痕量金屬的試驗方法 |
(Test Method for Trace Metals in Petroleum Coke by Atomic Absorption ) |
| ANSI/ASTM D5073-2002 |
表面水縱深測量實施規程 |
(Practice for Depth Measurement of Surface Water ) |
| ANSI/ASTM D5119-2002 |
評估Crc L-38火花點燃式發動機中汽車發動機油的試驗方法 |
(Test Method for Evaluation of Automotive Engine Oils in the CRC L-38 Spark-Ignition Engine (05.03) ) |
| ANSI/ASTM D512-2004 |
水中氯離子的試驗方法 |
|
| ANSI/ASTM D513-2002 |
水中總?cè)芙舛趸己康脑囼灧椒?/td>
| (Test Methods for Total and Dissolved Carbon Dioxide in Water ) |
| ANSI/ASTM D5133-2005 |
溫度掃描法測試潤滑油的低溫低剪切率粘性/溫度關系的試驗方法 |
|
| ANSI/ASTM D516-2002 |
水中硫酸鹽離子的試驗方法 |
(Test Method for Sulfate Ion in Water ) |
| ANSI/ASTM D5174-2002 |
用脈沖激光磷光光度法對水中痕量鈾的試驗方法 |
(Test Method for Trace Uranium in Water by Pulsed-Laser Phosphorimetry ) |
| ANSI/ASTM D5183-2005 |
用四球磨損試驗機測定潤滑油摩擦系數的試驗方法 |
|
| ANSI/ASTM D5185-2002 |
用感應耦合等離子體原子發射光譜法測定使用過的潤滑油中添加素、磨損金屬和污染物的試驗方法 |
(Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (05.03) ) |
| ANSI/ASTM D5186-2003 |
超臨界流體色譜法測定柴油和航空燃?xì)鉁u輪發動機用燃料中芳香烴含量和多核芳香烴的試驗方法 |
(Test Method for the Determination of the Aromatic Content and Polynuclear of Diesel Fuels and Aviation Turbine Fuels by Supercritical Fluid Chromatography ) |
| ANSI/ASTM D5188-2004 |
測定燃料汽-液比溫度的試驗方法(真空室法) |
|
| ANSI/ASTM D5191-2002 |
石油產品蒸汽壓力的試驗方法(最小方法) |
(Test Method for Vapor Pressure of Petroleum Products (Mini Method) (05.03) ) |
| ANSI/ASTM D5191-2004 |
石油產品蒸氣壓力的試驗方法(小型試驗法) |
|
| ANSI/ASTM D5213-2004 |
電氣絕緣和電介質用聚酰亞胺樹脂薄膜規范 |
|
| ANSI/ASTM D5236-2003 |
重?zé)N類混合物的蒸餾試驗方法(真空蒸餾鍋法) |
(Test Method for Distillation of Heavy Hydrocarbon Mixtures Vacuum Potstill Method ) |
| ANSI/ASTM D524-2003 |
石油產品中的蘭氏殘?zhí)康脑囼灧椒?/td>
| (Test Method for Ramsbottom Carbon Residue of Petroleum Products ) |
| ANSI/ASTM D525-2005 |
汽油氧化穩定性的試驗方法.誘導期法 |
|
| ANSI/ASTM D5257-2003 |
用離子色譜法測定水中可溶六價鉻的試驗方法 |
(Test Method for Dissolved Hexavalent Chromium in Water by Ion Chromatography ) |
| ANSI/ASTM D5258-2002 |
利用密封容器加熱法從沉淀物中淬取酸素的實施規程 |
(Practice for Acid-Extraction of Elements from Sediments Using Closed Vessel Microwave Heating ) |
| ANSI/ASTM D5275-2004 |
含流體聚合物的燃料噴射器剪切穩定性試驗(FISST)的試驗方法 |
|
| ANSI/ASTM D5291-2002 |
用儀器測定石油產品和潤滑劑中碳、氫和氮含量的試驗方法 |
(Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants, Test Method for (05.03) ) |
| ANSI/ASTM D5293-2002 |
用冷起動模擬法測定30℃至50℃時發動機油表觀粘度的試驗方法 |
(Apparent Viscosity of Engine Oils - Between 30 and 50? Using the Cold-Cranking Simulation, Test Method for (05.03) ) |
| ANSI/ASTM D5293-2004 |
用冷起動模擬法測定30℃至50℃之間發動機油表觀粘度的試驗方法 |
|
| ANSI/ASTM D5304-2003 |
用氧的過壓試驗評定餾出燃料儲存穩定性的新試驗方法 |
(New Test Method for Assessing Distillate Fuel Storage Stability by Oxygen Overpressure (05.03) ) |
| ANSI/ASTM D5304-2005 |
剩余氧壓法評定中間餾份燃料儲存穩定性的試驗方法 |
|
| ANSI/ASTM D5315-2004 |
柱后衍生直接水液注入式HPLC法測定水中的N-甲基-氨基甲�；亢蚇-氨基甲酸甲酯的試驗方法 |
|
| ANSI/ASTM D5372-2004 |
烴類熱傳導液體的評定指南 |
|
| ANSI/ASTM D5421-2005 |
接觸模制玻璃纖維(玻璃-纖維-增強熱固性樹脂)法蘭的標準規范 |
|
| ANSI/ASTM D5425-2002 |
制定電工產品著火危險評定標準指南 |
(Guide for Development of Fire Hazard Assessment Standards of Electrotechnical Products ) |
| ANSI/ASTM D5441-2003 |
用氣相色譜法分析甲基特丁基乙醚的試驗方法 |
(Test Method for Analysis of Methyl TERT-Butyl Ether MTBE by Gas Chromatography ) |
| ANSI/ASTM D5453-2003 |
紫外線熒光測量法測定輕質烴、發動機燃料和油中硫總含量的試驗方法 |
(Test Method for the Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence ) |
| ANSI/ASTM D5453-2005 |
紫外線熒光測量法測定輕質烴、火花點燃式發動機燃料、柴油發動機油和發動機油中總硫量的試驗方法 |
|
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com