標準號 |
中文名稱 |
英文名稱 |
| ANSI/ASTM D 1755-2001 |
聚氯乙烯樹脂規范(08.02) |
Specification for Poly(Vinyl Chloride) Resins |
| ANSI/ASTM D 1758-1996 |
用木樁現場試驗評定木材防腐劑的試驗方法 |
Test Method for Evaluating Wood Preservatives by Field Tests with Stakes |
| ANSI/ASTM D 1760-2001 |
木材產品的壓力處理規范 |
Specification for Pressure Treatment of Timber Products |
| ANSI/ASTM D 1763-1994 |
環氧樹脂規范(08.01) |
Specification for Epoxy Resins (08.01) |
| ANSI/ASTM D 1784-1992 |
剛性聚氯乙烯合成物規范(08.02,08.04) |
Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds (08.02, 08.04) |
| ANSI/ASTM D 1785-1999 |
聚氯乙烯(PVC)塑料管規范.表40、80和120 |
Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120 |
| ANSI/ASTM D 1786-2001 |
甲苯二異氰酸鹽規范 |
Toluenedisocyanate, Specifications for (08.02) |
| ANSI/ASTM D 1790-1994 |
用沖擊法測定塑料薄板的脆化溫度的試驗方法(08.01) |
Test Method for Brittleness Temperature of Plastic Sheeting by Impact (08.01) |
| ANSI/ASTM D 1796-1983 |
用分離法測定原油和燃料油中水和沉淀的試驗方法(05.01) |
Test for Water and Sediment in Crude Oils and Fuel Oils by Centrifuge, Method of (05.01) |
| ANSI/ASTM D 1823-1995 |
用擠壓粘度計測定高剪切率下塑料溶膠和有機溶膠的表觀粘度的試驗方法(08.01) |
Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer (08.01) |
| ANSI/ASTM D 1824-1995 |
用Brookfield粘度計測定低剪切率下塑料溶膠和有機溶膠的表觀粘度的試驗方法(08.01) |
Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates by Brookfield Viscometer (08.01) |
| ANSI/ASTM D 1830-1994 |
用曲線形電極法測定電絕緣柔性薄板材料的耐熱性的試驗方法(10.01) |
Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method (10.01) |
| ANSI/ASTM D 1831-1994 |
潤滑脂的滾動穩定性的試驗方法(05.01) |
Roll Stability of Lubricating Grease, Method of Test for (05.01) |
| ANSI/ASTM D 1832-1987 |
石蠟的過氧化物數目的試驗方法(05.01,15.09) |
Test Method for Peroxide Number of Petroleum Wax (05.01, 15.09) |
| ANSI/ASTM D 1833-1987 |
石蠟氣味的試驗方法(05.01,15.09) |
Odor of Petroleum Wax, Method of Test for (05.01, 15.09) |
| ANSI/ASTM D 1834-1990 |
蠟紙的20-Deg光澤面的試驗方法(05.01,15.09) |
Test Method for 20-Deg Specular Gloss of Waxed Paper (05.01, 15.09) |
| ANSI/ASTM D 1835-1991 |
液化石油氣規范(05.01) |
Specification for Liquefied Petroleum (LP) Gases (05.01) |
| ANSI/ASTM D 1837-2002 |
液化石油氣揮發性的試驗方法 |
Test Method for Volatility of Liquefied Petroleum (LP) Gases (05.01) |
| ANSI/ASTM D 1838-1991 |
液化石油氣腐蝕的銅帶的試驗方法(05.01,05.05) |
Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases (05.01, 05.05) |
| ANSI/ASTM D 1839-1991 |
用分光光度測定法測定柴油中戊基硝酸鹽的試驗方法(05.01) |
Test Method for Amyl Nitrate in Diesel Fuels by Spectrophotometry (05.01) |
| ANSI/ASTM D 1840-2001 |
紫外線分光光度法測定航空渦輪機燃料中萘烴的試驗方法 |
Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry, Method of Test for (05.01) |
| ANSI/ASTM D 1867-1997 |
印制線路用鍍銅熱固層壓板規范 |
Specification for Copper-Clad Thermosetting Laminates for Printed Wiring |
| ANSI/ASTM D 187-1994 |
煤油燃燒質量的試驗方法 |
Burning Quality of Kerosine, Method of Test for (05.01) |
| ANSI/ASTM D 1881-1998 |
在玻璃器皿中發動機冷卻劑起泡傾向的試驗方法 |
Test Method for Foaming Tendencies of Engine Coolants in Glassware |
| ANSI/ASTM D 1882-1998 |
汽車用冷卻系統化學溶液對車輛有機面漆產生影響的測試方法 |
Test Method for Effect of Cooling System Chemical Solutions on Organic Finishes for Automotive Vehicles |
| ANSI/ASTM D 189-2001 |
石油產品的康拉特遜殘?zhí)剂康脑囼灧椒?/td>
| Conradson Carbon Residue of Petroleum Products, Method of Test for (05.01) |
| ANSI/ASTM D 1894-1990 |
塑料薄膜和薄板的靜摩擦和動摩擦系數的試驗方法(08.02) |
Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting (08.02) |
| ANSI/ASTM D 1895-1997 |
塑料材料的表觀密度、容積因素和可傾注性的試驗方法 |
Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials |
| ANSI/ASTM D 1896-1993 |
傳遞熱固化合物模塑樣品的實施規程(08.02) |
Transfer Molding Specimens of Thermosetting Compounds, Practice for (08.02) |
| ANSI/ASTM D 1898-1997 |
塑料抽樣實施規范 |
Practice for Sampling of Plastics |
| ANSI/ASTM D 1921-2001 |
塑料的粒徑(篩析法)的標準試驗方法(08.02) |
Particle Size (Sieve Analysis) of Plastic Materials, Standard Test Method for (08.02) |
| ANSI/ASTM D 1922-1994 |
用擺動法測定塑料薄膜和薄板耐撕裂擴展的試驗方法(08.01) |
Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by the Pendulum Method (08.01) |
| ANSI/ASTM D 1929-1991 |
塑料燃點特性的試驗方法(08.01) |
Test Method for Ignition Properties of Plastics (08.01) |
| ANSI/ASTM D 1931-1994 |
電絕緣用全曲硅橡膠覆層的玻璃布和膠帶的規范(10.01) |
Specification for Fully Cured Silicone Rubber-Coated Glass Fabric and Tapes for Electrical Insulation (10.01) |
| ANSI/ASTM D 1938-1992 |
用單剪切法測定塑料薄膜和薄板的耐撕裂擴展性的試驗方法(08.02) |
Test Method for Tear Propagation Resistance of Plastic Film and Thin Sheeting by a Single-Tear Method (08.02) |
| ANSI/ASTM D 1947-1983 |
液體齒輪潤滑劑的荷載容量的試驗方法(05.01) |
Load-Carrying Capacity of Fluid Gear Lubricants, Method of Test for (05.01) |
| ANSI/ASTM D 1972-2001 |
塑料90-03第55項的一般標記實施規范 |
Practice for Generic Making of Plastics 90-03 Item 55 (08.01) |
| ANSI/ASTM D 1996-1992 |
用液相色譜法測定低密度聚乙烯中酚醛抗氧化劑和Erucamide slip添加劑的試驗方法(08.01) |
Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Low Density Polyethylene Using Liquid Chromatography (LC) (08.01) |
| ANSI/ASTM D 2001-1992 |
汽油和礦物油的脫戊烷的試驗方法(05.01) |
Test Method for Depentanization of Gasoline and Naphthas (05.01) |
| ANSI/ASTM D 2002-1993 |
從低烯石油精中分離代表性飽和部分的試驗方法(05.01) |
Test Method for Isolation of Representative Saturates Fraction from Low-Olefinic Petroleum Naphthas (05.01) |
| ANSI/ASTM D 2003-1993 |
從高烯石油精中分離代表性飽和部分的試驗方法(05.01) |
Test Method for Isolation of Representative Saturates Fraction from High-Olefinic Petroleum Naphthas (05.01) |
| ANSI/ASTM D 2007-2001 |
用粘土膠吸收色譜法測定橡膠膨脹劑和加工油以及石油的特性集的試驗方法(05.01) |
Test Method for Characteristic Groups in Rubber Extender and Processing Oils and other Petroleum Derived Oils by the Clay-Gel Absorption Chromatographic Method (05.01) |
| ANSI/ASTM D 2008-1991 |
石油產品的紫外線吸收能力的試驗方法(05.01) |
Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products (05.01) |
| ANSI/ASTM D 2010-2001 |
用二氧化鉛技術評價空氣中總硫酸鹽活性的試驗方法 |
Test Methods for Evaluation of Total Sulfation Activity in the Atmosphere by the Lead Dioxide Technique |
| ANSI/ASTM D 2017-1996 |
木材抗自然腐爛的加速實驗室試驗的試驗方法 |
Test Method for Accelerated Laboratory Test of Natural Decay Resistance of Woods |
| ANSI/ASTM D 202-1992 |
電絕緣用未處理紙的取樣和測試方法 |
Methods of Sampling and Testing Untreated Paper Used for Electrical Insulation (10.01) |
| ANSI/ASTM D 2067-1992 |
測量重型柴油發動機中油的消耗、活塞沉積和磨損的試驗方法.NTC-400程序(06.02) |
Test Method for Measurement of Oil Consumption, Piston Deposits, and Wear in a Heavy-Duty High-Speed Diesel Engine - NTC-400 Procedure (06.02) |
| ANSI/ASTM D 2068-1991 |
餾出燃料油的過濾器阻塞傾向的試驗方法(05.01) |
Test Method for Filter Blocking Tendency of Distillate Fuel Oils (05.01) |
| ANSI/ASTM D 2069-1991 |
船用燃料油規范(05.01) |
Specification for Marine Fuel (05.01) |
| ANSI/ASTM D 2070-1991 |
液壓油的熱穩定性的試驗方法(05.01) |
Method for Thermal Stability of Hydraulic Oils (05.01) |
| ANSI/ASTM D 2085-1996 |
溶液或木材中計算五氯苯酚用氯化物測定的試驗方法 |
Test Method for Determining Chloride Used in Calculating Pentachlorophenol in Solutions or Wood (Lime Ignition Method) |
| ANSI/ASTM D 2103-1992 |
聚乙烯薄膜和薄板規范(08.01) |
Specification for Polyethylene Film and Sheeting (08.01) |
| ANSI/ASTM D 2104-2001 |
聚乙烯(PE)塑料管規范.表40 |
Specification for Polyethylene (PE) Plastic Pipe, Schedule 40 |
| ANSI/ASTM D 2105-2001 |
纖維玻璃徑向拉伸特性的試驗方法 |
Test Method for Longitudinal Tensile Properties of Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube |
| ANSI/ASTM D 2109-2002 |
鹵化有機溶劑及其混合物中不揮發物質的測試方法 |
Test Method for Nonvolatile Matter in Halogenated Organic Solvents and their Admixtures |
| ANSI/ASTM D 2115-1992 |
聚氯乙烯成份的爐熱穩定性(X-15-371-1)92-03項目18(08.02) |
Oven Heat Stability of Poly(Vinyl Chloride) Compositions (X-15-371-1) 92-03 Item 18 (08.02) |
| ANSI/ASTM D 2116-1995 |
FEP碳氟模塑和擠塑材料規范(08.01) |
Specification for FEP-Fluorocarbon Molding and Extrusion Materials (08.01) |
| ANSI/ASTM D 2126-1995 |
剛性多孔塑料耐熱、耐潮和耐老化性的試驗方法(08.02) |
Response of Rigid Cellular Plastics to Thermal and Humid Aging, Test Method for (08.02) |
| ANSI/ASTM D 2132-1998 |
電絕緣材料的塵霧痕跡和耐腐蝕的試驗方法 |
Test Method for Dust-and-Fog Tracking and Erosion Resistance of Electrical Insulating Materials |
| ANSI/ASTM D 2143-1995 |
增強的熱固塑料管循環壓力強度的試驗方法(08.04) |
Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe (08.04) |
| ANSI/ASTM D 2151-1995 |
用橡膠合成成份測定聚氯乙烯成份的試驗方法(08.02) |
Test Method for Staining of Poly(Vinyl Chloride) Compositions by Rubber Compounding Ingredients (08.02) |
| ANSI/ASTM D 2156-1994 |
測定餾出燃料中油氣的煙密度的試驗方法(05.02) |
Smoke Density in the Flue Gases from Distillate Fuels, Method of Test for (05.02) |
| ANSI/ASTM D 2157-1994 |
測定燃燒的燃料中油氣的煙密度的效應的試驗方法(05.01) |
Effect of Air Supply on Smoke Density in Fuel Gases from Burning Distillate Fuel, Test for (05.01) |
| ANSI/ASTM D 2158-1992 |
液化石油氣中殘留物的試驗方法(05.01) |
Residues in Liquefied Petroleum (LP) Gases, Method of Test for (05.01) |
| ANSI/ASTM D 2159-1993 |
用折射截取法測定飽和餾分中的礦物油的試驗方法(05.01) |
Naphthenes in Saturates Fractions by Refractivity Intercept, Method of Test for (05.01) |
| ANSI/ASTM D 2160-1992 |
液壓液的熱穩定性的試驗方法(05.01) |
Thermal Stability of Hydraulic Fluids, Methods of Test for (05.01) |
| ANSI/ASTM D 2161-1987 |
動粘度向賽氏通用粘度或賽氏厚油粘度的轉換的試驗方法(05.01,10.03) |
Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity, Method for (05.01, 10.03) |
| ANSI/ASTM D 2162-1991 |
標準粘度計的基本校準方法和粘性油標準(05.01) |
Method for Basic Calibration of Master Viscometer and Viscosity Oil Standards (05.01) |
| ANSI/ASTM D 2163-1991 |
用氣相色譜法分析液化石油氣和丙烷濃度的試驗方法(05.01) |
Test Method for Analysis of Liquefied Petroleum (LP) Gases and Propane Concentrates by Gas Chromatography (05.01) |
| ANSI/ASTM D 217-1988 |
潤滑脂的圓錐貫入試驗方法 |
Cone Penetration of Lubricating Grease, Method of Test for (05.01) |
| ANSI/ASTM D 2222-1994 |
氯乙烯樹脂的甲醇萃取的試驗方法(X-15-393)(08.01) |
Test Method for Methanol Extract of Vinyl Chloride Resins (X-15-393) (08.01) |
| ANSI/ASTM D 2235-2001 |
ABS塑料管道和配件的溶劑水泥規范 |
Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings |
| ANSI/ASTM D 2239-2001 |
控制內徑的聚乙烯(PE)塑料管(SIDR-PR)規范 |
Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter |
| ANSI/ASTM D 2265-1994 |
大溫度范圍的潤滑脂的滴定點的試驗方法(05.01) |
Dropping Point of Lubricating Grease of Wide Temperature Range, Method of Test for (05.01) |
| ANSI/ASTM D 2266-2001 |
潤滑脂的耐磨損特性的試驗方法(四球法) |
Test Method for Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method) (05.01) |
| ANSI/ASTM D 2268-1993 |
用毛細管氣相色譜法分析高純度n-庚烷和異辛烷的方法(05.01) |
Analysis of High-Purity n-Heptane and Isooctane by Capillary Gas Chromatography, Method for (05.01) |
| ANSI/ASTM D 2269-1988 |
用紫外線吸收法評價白色礦物油的方法(05.01) |
Evaluation of White Mineral Oils by Ultraviolet Absorption, Method for (05.01) |
| ANSI/ASTM D 2270-1991 |
40℃和100℃時動粘度中粘度指數的方法(05.01) |
Method for Calculating Viscosity Index from Kinematic Viscosity at 40?and 100鳦 (05.01) |
| ANSI/ASTM D 2271-1986 |
初步檢驗液壓液(磨損試驗)的方法(05.01) |
Preliminary Examination of Hyrdaulic Fluids (Wear Test), Practice for (05.01) |
| ANSI/ASTM D 2272-1985 |
用轉式儲氣瓶測定蒸氣渦輪機油氧化穩定性的連續性的試驗方法(05.01) |
Continuity of Steam-Turbine Oil Oxydation Stability by Rotating Bomb, Method of Test for (05.01) |
| ANSI/ASTM D 2273-1986 |
潤滑油痕量沉積的試驗方法(05.01) |
Trace Sediment in Lubricating Oils, Method of Test for (05.01) |
| ANSI/ASTM D 2274-1994 |
餾出燃料油的氧化穩定性(加速法)的試驗方法(05.01) |
Oxidation Stability of Distillate Fuel Oil (Accelerated Method), Test for (05.01) |
| ANSI/ASTM D 2275-1995 |
表面經過部分放電的實心電絕緣材料的電壓耐久性的試驗方法(10.01) |
Test Method for Voltage Endurance of Solid Electrical Insulating Materials Subjected to Partial Discharges (Corona) on the Surface (10.01) |
| ANSI/ASTM D 2276-1994 |
用線性抽樣法測定航空燃料中顆粒污染物的試驗方法(05.01) |
Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling (05.01) |
| ANSI/ASTM D 2278-1996 |
現場評定圓柱形試樣中木材防腐劑的方法 |
Method for Field Evaluation of Wood Preservatives in Round Post-Size Specimens |
| ANSI/ASTM D 2287-2001 |
非剛性氯乙烯聚合物和共聚物模塑和擠壓復合物(X-15-360)第19項(X-15-372-1)規范 |
Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds (X-15-360) Item 19 (X-15-372-1) (08.02) |
| ANSI/ASTM D 2288-2001 |
加熱時增塑劑的重量損耗的試驗方法(X-15-373-1) |
Test Method for Weight Loss of Plasticizers on Heating (X-15-373-1) (08.02) |
| ANSI/ASTM D 229-2001 |
電絕緣用硬質薄板及板材的試驗方法 |
Test Methods for Rigid Sheet and Plate Materials Used for Electrical Insulation |
| ANSI/ASTM D 2305-1995 |
電絕緣用聚合薄膜的試驗方法(94-4,2項)(10.01) |
Test Methods for Polymeric Films Used for Electrical Insulation (94-4, Item 2) (10.01) |
| ANSI/ASTM D 2310-2001 |
機器制造的纖維玻璃規范 |
Classification for Machine-Made Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
| ANSI/ASTM D 2343-1995 |
增強塑料用玻璃纖維股、紗線和粗紗的抗拉特性的試驗方法(08.01) |
Test Method for Tensile Properties of Glass Fiber Strands, Yarns, and Rovings Used in Reinforced Plastics (08.01) |
| ANSI/ASTM D 2382-1988 |
用彈式量熱計測定碳氫燃料的熱耗的試驗方法(高精度法)(05.02) |
Heat of Combustion of Hydrocarbon Fuels by Bomb Calorimeter (High-Precision Method), Test Method for (05.02) |
| ANSI/ASTM D 2383-2001 |
在潮濕條件下測試聚氯乙烯化合物中增塑劑兼容性的試驗的實施規范 |
Practice for Testing Plasticizer Compatibility in Poly(Vinyl Chloride) (PVC) Compounds under Humid Conditions (08.02) |
| ANSI/ASTM D 2384-2001 |
丁烷-丁烯混合物中揮發性氯化物的痕量的試驗方法(05.01) |
Test Methods for Traces of Volatile Chlorides in Butane-Butene Mixtures |
| ANSI/ASTM D 2385-1981 |
天然氣中硫化氫和硫醇(鎘硫碘滴定法)的試驗方法(05.05) |
Hydrogen Sulfide and Mercaptan Sulfur in Natural Gas (Cadmium Sulfate-lodometric Titration Method) Method of Test for (05.05) |
| ANSI/ASTM D 2386-2001 |
航空燃料的冰點的試驗方法(05.01) |
Freezing Point of Aviation Fuels, Method of Test for (05.01) |
| ANSI/ASTM D 2392-1996 |
著色航空汽油的顏色的試驗方法(05.01) |
Test Method for Color of Dyed Aviation Gasolines |
| ANSI/ASTM D 2393-1986 |
環氧樹脂和相關成分粘度的試驗方法(08.02) |
Epoxy Resins and Related Components, Test Method for Viscosity of (08.02) |
| ANSI/ASTM D 2396-1988 |
用轉矩流變儀測定聚氯乙烯樹脂粉末混合的試驗方法(08.02) |
Test Method for Powder-Mix Test for Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer (08.02) |
| ANSI/ASTM D 240-1992 |
用氧彈式量熱計測定液態烴燃料的燃燒熱值的測試方法 |
Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter, Method of Test for (05.01) |
| ANSI/ASTM D 2400-1994 |
電絕緣用浸漆玻璃聚酯布的規范(10.01) |
Specification for Varnished Glass-Polyester Cloth Used for Electrical Insulation (10.01) |
| ANSI/ASTM D 2411-1989 |
預制和成形用乙酸纖維素丁酸酯薄膜和薄板規范(08.02) |
Specification for Cellulose Acetate Butyrate Film and Sheeting for Fabricating and Forming (08.02) |
| ANSI/ASTM D 2420-1991 |
液化石油氣中硫化氫的試驗方法(乙酸鉛法)(05.01) |
Test Method for Hydrogen Sulfide in Liquefied Petroleum (LP) Gases (Lead Acetate Method) (05.01) |
| ANSI/ASTM D 2421-2001 |
從C5和輕質烴類到氣體容量、液體容量或重量基的分析變換(05.01) |
Interconversion of Analysis of C5 and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Weight Basis (05.01) |
| ANSI/ASTM D 2422-1997 |
工業用液體潤滑劑粘度系統的實施規范 |
Viscosity System for Industrial Fluid Lubricants, Practice for (05.01) |
| ANSI/ASTM D 2423-1985 |
蠟紙或紙板上表面蠟的試驗方法(05.01,15.09) |
Test Method for Surface Wax on Waxed Paper or Paperboard (05.01, 15.09) |
| ANSI/ASTM D 2425-1988 |
用質譜測定法測定氣體的化學成份的試驗方法(05.01) |
Chemical Composition of Gases by Mass Spectrometry, Test Method for (05.01) |
| ANSI/ASTM D 2426-1993 |
用氣相色譜法測定丁二烯濃縮物中丁二烯二聚物和苯乙烯的試驗方法(05.01) |
Butadiene Dimer and Styrene in Butadiene Concentrates by Gas Chromatography, Method of Test for (05.01) |
| ANSI/ASTM D 2427-1992 |
用氣相色譜法測定汽油中C2到C5烴類的試驗方法(05.01) |
Method for Determination of C2 Through C5 Hydrocarbons in Gasoline by Gas Chromatography (05.01) |
| ANSI/ASTM D 2428-1992 |
測定航空液壓液的模擬再循環系統的試驗方法(05.01) |
Simulative Recirculating System Testing of Aerospace Hydraulic Fluids, Method for (05.01) |
| ANSI/ASTM D 2443-1996 |
電氣設備中用作挽具的綁束繩和帶的試驗方法 |
Methods of Testing Lacing Twines and Tapes Used as Harnesses in Electrical Equipment |
| ANSI/ASTM D 2447-2001 |
以外徑尺寸為基準的聚乙烯(PE)塑料管規范.表40和80 |
Specification for Polyethylene (PE) Plastic Pipe, Schedules 40 and 80, Based on Outside Diameter |
| ANSI/ASTM D 2457-1997 |
塑料薄膜和薄板鏡面光澤的測試方法 |
Test Method for Specular Gloss of Plastic Film and Sheeting |
| ANSI/ASTM D 246-1996 |
雜酚油和雜酚油-煤焦油溶液的蒸餾方法 |
Method for Distillation of Creosote and Creosote Coal Tar Solutions |
| ANSI/ASTM D 2463-1995 |
吹模熱塑性容器的耐跌落沖擊的試驗方法(08.02) |
Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers (08.02) |
| ANSI/ASTM D 2466-2001 |
聚氯乙烯塑料管道配件規范.方案40 |
Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 |
| ANSI/ASTM D 2467-2001 |
套管型聚氯乙烯(PVC)塑料管道配件規范,方案80 |
Specification for Socket-Type Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 |
| ANSI/ASTM D 2471-1994 |
反應性熱固性樹脂的凝膠時間和最高防熱溫度的試驗方法(08.02) |
Test Method for Gel Time and Peak Exothermic Temperature of Reacting Thermosetting Resins (08.02) |
| ANSI/ASTM D 2481-1996 |
用小尺寸樣品加速評定船用木材防腐劑的方法 |
Method for Accelerated Evaluation of Wood Preservatives for Marine Service by Means of Small-Size Specimens |
| ANSI/ASTM D 2484-1994 |
聚脂薄膜壓力規范.敏感性電絕緣(10.01) |
Specification for Polyester Film Pressure - Sensitive Electrical Insulating (10.01) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com