標準號 |
中文名稱 |
英文名稱 |
| ASTM C 1352-1996 |
方石彎曲彈性模量的標準試驗方法 |
Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone |
| ASTM C 1353-1998 |
通過分磨損物對方石的磨損抗性的標準試驗方法 |
Standard Test Method for Abrasion Resistance of Dimension Stone by the Taber Abraser |
| ASTM C 1354-1996 |
土方石獨立石橋墩的強度的標準試驗方法 |
Standard Test Method for Strength of Individual Stone Anchorages in Dimension Stone |
| ASTM C 1355/C 1355M-1996 |
玻璃纖維增強石膏成份的標準規范 |
Standard Specification for Glass Fiber Reinforced Gypsum Composites |
| ASTM C 1356M-1996 |
微觀計點法定量測定波特蘭水泥熟料中相位的標準試驗方法 |
Standard Test Method for Quantitative Determination of Phases in Portland Cement Clinker by Microscopical Point-Count Procedure [Metric] |
| ASTM C 1357-1998 |
評定磚石砌合強度的標準試驗方法 |
Standard Test Methods for Evaluating Masonry Bond Strength |
| ASTM C 1358-1996 |
室溫下帶有實心長方形截面樣品的連續增強纖維高級陶瓷的單值壓強試驗的標準試驗方法 |
Standard Test Method for Monotonic Compressive Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Specimens at Ambient Temperatures |
| ASTM C 1359-1996 |
高溫下帶有實心長方形截面樣品的連續增強纖維高級陶瓷的單值抗拉強度試驗的標準試驗方法 |
Standard Test Method for Monotonic Tensile Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics With Solid Rectangular Cross-Section Specimens at Elevated Temperatures |
| ASTM C 136-2001 |
細集料及粗集料篩分的標準試驗方法 |
Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates |
| ASTM C 1360-1996 |
室溫下連續纖維增強高級陶瓷的等高度、軸向的和雙向拉伸循環疲勞強度的標準規程 |
Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures |
| ASTM C 1361-1996 |
室溫下高級陶瓷的等高度、軸向的和雙向拉伸循環疲勞強度的標準規程 |
Standard Practice for Constant-Amplitude, Axial Tension-Tension Cyclic Fatigue of Advanced Ceramics at Ambient Temperatures |
| ASTM C 1362-1997 |
新混合的液壓混凝土的流動性的標準試驗方法 |
Standard Test Method for Flow of Freshly Mixed Hydraulic nt Concrete |
| ASTM C 1363-1997 |
用隔熱箱測定建筑組件的熱性能的標準試驗方法 |
Standard Test Method for the Thermal Performance of Building Assemblies by Means of a Hot Box Apparatus |
| ASTM C 1364-1997 |
建筑鑄石的標準規范 |
Standard Specification for Architectural Cast Stone |
| ASTM C 1365-1998 |
用X射線粉末衍射分析測定硅酸鹽水泥和硅酸鹽水泥熔渣的階段比例的標準試驗方法 |
Standard Test Method for Determination of the Proportion of Phases in Portland Cement and Portland-Cement Clinker Using X-Ray Powder Diffraction Analysis |
| ASTM C 1366-1997 |
高溫下單值高級陶瓷抗拉強度的標準試驗方法 |
Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures |
| ASTM C 1367-2001 |
最大承載剪切下熱應用密封劑耐熱性的標準試驗方法 |
Standard Test Method for Heat Resistance of Hot-Applied Sealants Under Dead Load Shear |
| ASTM C 1368-2001 |
室溫下用恒定應力率彎曲試驗測定高級陶瓷的裂紋緩慢生長系數的標準試驗方法 |
Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Ambient Temperature |
| ASTM C 1369-1997 |
釉面結構絕緣玻璃件的二級邊緣密封劑的標準規范 |
Standard Specification for Secondary Edge Sealants for Structurally Glazed Insulating Glass Units |
| ASTM C 1371-1998 |
使用便攜式發射計測定接近室溫的材料輻射的標準試驗方法 |
Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers |
| ASTM C 1372-2001 |
局部擋土墻砌塊的標準規范 |
Standard Specification for Segmental Retaining Wall Units |
| ASTM C 1372a-2001 |
部分支撐墻砌塊的標準規范 |
Standard Specification for Segmental Retaining Wall Units |
| ASTM C 1373-1998 |
模擬冬季條件下測定頂樓絕緣系統熱阻性的標準規程 |
Standard Practice for Determination of Thermal Resistance of Attic Insulation Systems Under Simulated Winter Conditions |
| ASTM C 1374-1997 |
測定松散充填建筑物絕緣的安裝厚度的標準試驗方法 |
Standard Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation |
| ASTM C 1375-1997 |
用于測試建筑物密封和膠粘劑的基質的標準指南 |
Standard Guide for Substrates Used in Testing Building Seals and Sealants |
| ASTM C 1376-1997 |
玻璃上的熱解和真空淀積涂層的標準規范 |
Standard Specification for Pyrolytic and Vacuum Deposition Coatings on Glass |
| ASTM C 1377-1997 |
表面/應力測量裝置的校準的標準試驗方法 |
Standard Test Method for Calibration of Surface/Stress Measuring Devices |
| ASTM C 1378-1997 |
抗銹蝕性的測定的標準試驗方法 |
Standard Test Method for Determination of Resistance to Staining |
| ASTM C 1379-1997 |
用電感耦合的等離子質譜法對鈾235和鈾238同位素進行尿分析的標準試驗方法 |
Standard Test Method for Analysis of Urine for Uranium-235 and Uranium-238 Isotopes by Inductively Coupled Plasma-Mass Spectrometry |
| ASTM C 138-2001 |
混凝土的單位重量分析、屈服點及空氣含量測定(重量計算)的標準試驗方法 |
Standard Test Method for Unit Weight, Yield, and Air Content (Gravimetric) of Concrete |
| ASTM C 138/C 138Ma-2001 |
混凝土的密度(單位重量)、屈服點及空氣含量測定(重量計算)的標準試驗方法 |
Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete |
| ASTM C 1380-1997 |
用同位素稀釋質譜法測定鈾含量和同位成份的標準試驗方法 |
Standard Test Method for Determination of Uranium Content and Isotopic Composition by Isotope Dilution Mass Spectrometry |
| ASTM C 1381-1997 |
模制玻璃纖維增強石膏部件的標準規范 |
Standard Specification for Molded Glass Fiber Reinforced Gypsum Parts |
| ASTM C 1382-2002 |
當用作外部絕緣和精整系統接縫料時密封劑抗拉粘附特性測定的試驗方法 |
Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints |
| ASTM C 1383-1998 |
用沖擊回聲法測量P波速度和混凝土板的厚度的標準試驗方法 |
Standard Test Method for Measuring the P-Wave Speed and the Thickness of Concrete Plates Using the Impact-Echo Method |
| ASTM C 1384-2001 |
圬工灰漿改良劑的標準規范 |
Standard Specification for Admixtures for Masonry Mortars |
| ASTM C 1385-1998 |
噴漿混凝土取樣材料的標準規程 |
Standard Practice for Sampling Materials for Shotcrete |
| ASTM C 1386-1998 |
預制蒸養加氣混凝土墻建筑部件的標準規范 |
Standard Specification for Precast Autoclaved Aerated Concrete (PAAC) Wall Construction Units |
| ASTM C 1387-1998 |
土壤里锝99的測定的標準指南 |
Standard Guide for Determination of Technetium-99 in Soil |
| ASTM C 139-2001 |
雨水井和人孔建造用混凝土砌塊標準規范 |
Standard Specification for Concrete Masonry Units for Construction of Catch Basins and Manholes |
| ASTM C 1392-1998 |
評價構造密封門窗玻璃破壞的標準指南 |
Standard Guide for Evaluating Failure of Structural Sealant Glazing |
| ASTM C 1394-1998 |
評價原始構造硅酮門窗玻璃的標準指南 |
Standard Guide for In-Situ Structural Silicone Glazing Evaluation |
| ASTM C 1395/C 1395M-2001 |
石膏頂棚板規范 |
Specification for Gypsum Ceiling Board |
| ASTM C 1396/C 1396M-2001 |
石膏板標準規范 |
Standard Specification for Gypsum Board |
| ASTM C 1397-1998 |
PB級外部絕緣和精整系統的應用的標準規程 |
Standard Practice for Application of Class PB Exterior Insulation and Finish Systems |
| ASTM C 1398-1998 |
用吉爾摩水泥稠度試驗針實驗室測定含噴漿水泥添加劑的水硬水泥砂漿的凝固時間的標準試驗方法 |
Standard Test Method for Laboratory Determination of Time Setting of Hydraulic-Cement Mortars Containing Additives for Shotcrete by the Use of Gillmore Needles |
| ASTM C 1399-2000 |
獲取纖維增強混凝土的平均剩余強度的試驗方法 |
Test Method for Obtaining Average Residual-Strength of Fiber-Reinforced Concrete |
| ASTM C 14-1999 |
混凝土污水管、雨水管和涵管 |
Concrete Sewer, Storm Drain and Culvert Pipe |
| ASTM C 140-2001 |
混凝土圬工單位及相關單位取樣和檢驗的標準試驗方法 |
Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units |
| ASTM C 1400-2001 |
降低新砌筑墻風化勢能的標準指南 |
Standard Guide for Reduction of Efflorescence Potential in New Masonry Walls |
| ASTM C 1401-1998 |
結構性密封門窗玻璃的標準指南 |
Standard Guide for Structural Sealant Glaze |
| ASTM C 1402-1998 |
土壤樣品的高分辨率γ射線光譜測定法的標準指南 |
Standard Guide for High-Resolution Gamma-Ray Spectrometry of Soil Samples |
| ASTM C 1403-1999 |
圬工砂漿吸水率的標準試驗方法 |
Standard Test Method for Rate of Water Absorption of Masonry Mortars |
| ASTM C 1404/C 1404M-1998 |
用直接拉力測量與混凝土一起使用的膠粘系統的粘合強度的標準試驗方法 |
Standard Test Method for Bond Strength of Adhesive Systems Used with Concrete as Measured by Direct Tension |
| ASTM C 1405-2001 |
釉面磚標準規范(一次燒成的實心磚) |
Standard Specification for Glazed Brick (Single Fired, Solid Brick Units) |
| ASTM C 1405b-2001 |
釉面磚標準規范(一次燒成的實心磚) |
Standard Specification for Glazed Brick (Single Fired, Solid Brick Units) |
| ASTM C 1407-1998 |
計算成型耐火制品面積、體積和線性變化的標準實施規范 |
Standard Practice for Calculating Areas, Volume, and Linear Change of Refractory Shapes |
| ASTM C 1408-1998 |
用直接燃燒紅外探測法測定氧化鈾粉末和顆粒中總碳量的標準試驗方法 |
Standard Test Method for Carbon (Total) in Uranium Oxide Powders and Pellets By Direct Combustion-Infrared Detection Method |
| ASTM C 1409-1998 |
測量和估算絕緣管及件數量的標準導則 |
Standard Guide for Measuring and Estimating Quantities of Insulated Piping and Components |
| ASTM C 140a-2001 |
混凝土圬工單位及相關單位取樣和檢驗的標準試驗方法 |
Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units |
| ASTM C 141-1997 |
建筑結構用水硬性熟石灰 |
Hydraulic Hydrated Lime for Structural Purposes |
| ASTM C 1410-1998 |
多孔三聚氰胺隔熱和吸音的標準規范 |
Standard Specification for Cellular Melamine Thermal and Sound-Absorbing Insulation |
| ASTM C 1411-2001 |
同位素分析前鈾和钚離子交換分離的標準實施規程 |
Standard Practice for the Ion Exchange Separation of Uranium and Plutonium Prior to Isotopic Analysis |
| ASTM C 1413-1999 |
用熱電離質譜法進行水解六氟化鈾和硝酸雙氧鈾溶液同位素分析的標準試驗方法 |
Standard Test Method for Isotopic Analysis of Hydrolyzed Uranium Hexafluoride and Uranyl Nitrate Solutions by Thermal Ionization Mass Spectrometry |
| ASTM C 1414-2001 |
用離子交換法從钚中分離镅的標準實施規程 |
Standard Practice for the Separation of Americium from Plutonium by Ion Exchange |
| ASTM C 1415-2001 |
用α能譜測定法測定钚-238同位素豐度的標準試驗方法 |
Standard Test Method for 238Pu Isotopic Abundance by Alpha Spectrometry |
| ASTM C 1416-1999 |
用X射線熒光法分析天然水和廢水中鈾的標準試驗方法 |
Standard Test Method for Uranium Analysis in Natural and Waste Water by X-Ray Fluorescence |
| ASTM C 1417-2000 |
直接設計的鋼筋混凝土污水管、雨水管和涵管的生產標準規范 |
Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design |
| ASTM C 1417M-2000 |
直接設計的鋼筋混凝土污水管、雨水管和涵管的生產標準規范(米制) |
Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric) |
| ASTM C 1419-1999 |
室溫下耐火材料中的聲速及聲速在測量近似楊氏模量中的應用的標準試驗方法 |
Standard Test Method for Sonic Velocity in Refractory Materials at Room Temperature and Its Use in Obtaining an Approximate Youngs Modulus |
| ASTM C 142-1997 |
集料中的土塊和易碎顆粒含量的測試方法 |
Test Method for Clay Lumps and Friable Particles in Aggregates |
| ASTM C 1420-1999 |
成品砌塊投入使用的選擇、搬運和送運的標準導則 |
Standard Guide for Selection, Removal, and Shipment of Manufactured Masonry Units Placed in Usage |
| ASTM C 1421-2001 |
室溫下高級陶瓷斷裂韌性測定的標準試驗方法 |
Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperatures |
| ASTM C 1421b-2001 |
室溫下高級陶瓷斷裂韌性測定的標準試驗方法 |
Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperatures |
| ASTM C 1422-1999 |
化學增強平面玻璃的標準規范 |
Standard Specification for Chemically Strengthened Flat Glass |
| ASTM C 1423-1998 |
隔熱用封裝材料選擇的標準指南 |
Standard Guide for Selecting Jacketing Materials for Thermal Insulation |
| ASTM C 1424-1999 |
室溫下高級陶瓷恒定抗壓強度測定的標準試驗方法 |
Standard Test Method for Monotonic Compressive Strength of Advanced Ceramics at Ambient Temperatures |
| ASTM C 1425-1999 |
高溫下1-D和2-D連續纖維增強高級陶瓷層間剪切強度測定的標準試驗方法 |
Standard Test Method for Interlaminar Shear Strength of 1-D and 2-D Continuous Fiber-Reinforced Advanced Ceramics at Elevated Temperatures |
| ASTM C 1426-1999 |
旋光計檢驗和校正的標準實施規范 |
Standard Practices for Verification and Calibration of Polarimeters |
| ASTM C 1427-1999 |
預制撓性多孔聚烯烴板狀和管狀隔熱材料規范 |
Specification for Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form |
| ASTM C 1428-1999 |
用單支架氣體源多收集器質譜儀法進行六氟化鈾的同位素分析的標準試驗方法 |
Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Single-Standard Gas Source Multiple Collector Mass Spectrometer Method |
| ASTM C 1429-1999 |
用雙支架多收集器氣體質譜儀進行六氟化鈾的同位素分析的標準試驗方法 |
Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Double-Standard Multi-Collector Gas Mass Spectrometer |
| ASTM C 143-1990 |
硅酸鹽水泥混凝土坍落度的試驗方法 |
Test Method for Slump of Hydraulic Cement Concrete |
| ASTM C 143/C 143M-2000 |
水凝水泥混凝土坍落度的標準試驗方法 |
Standard Test Method for Slump of Hydraulic Cement Concrete |
| ASTM C 1431-1999 |
維護容器清理用鋁基廢核燃料腐蝕檢驗的標準導則 |
Standard Guide for Corrosion Testing of Aluminum-Based Spent Nuclear Fuel in Support of Repository Disposal |
| ASTM C 1432-1999 |
測定钚中雜質的標準試驗方法:酸溶解、離子交換矩陣分離和感應耦合等離子體-原子發射光譜法(ICP/AES)分析 |
Standard Test Method for Determination of Impurities in Plutonium: Acid Dissolution, Ion Exchange Matrix Separation, and Inductively Coupled Plasma-Atomic Emission Spectroscopic (ICP/AES) Analysis |
| ASTM C 1433-2001 |
涵洞、雨水管和污水管道用預制鋼筋混凝土箱形部件的標準規范 |
Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers |
| ASTM C 1433M-2001 |
涵洞、雨水管和污水管道用預制鋼筋混凝土箱形部件的標準規范(米制) |
Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers [Metric] |
| ASTM C 1435-1999 |
用振動錘在柱形模子中模壓碾實混凝土的標準實施規范 |
Standard Practice for Molding Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Hammer |
| ASTM C 1436-1999 |
噴漿混凝土用材料的標準規范 |
Standard Specification for Materials for Shotcrete |
| ASTM C 1437-1999 |
水硬水泥灰漿流動性的標準試驗方法 |
Standard Test Method for Flow of Hydraulic Cement Mortar |
| ASTM C 1438-1999 |
水硬水泥混凝土和灰漿用乳液和粉末狀聚合物改性劑的標準規范 |
Standard Specification for Latex and Powder Polymer Modifiers for Hydraulic Cement Concrete and Mortar |
| ASTM C 1439-1999 |
聚合物改性的灰漿和混凝土的標準試驗方法 |
Standard Test Methods for Polymer-Modified Mortar and Concrete |
| ASTM C 144-1999 |
砌筑砂漿集料 |
Aggregate for Masonry Mortar |
| ASTM C 1441-1999 |
用傅里葉轉換紅外(FTIR)光譜分析六氟化鈾中制冷劑114加上其它含碳和含氟化合物的標準試驗方法 |
Standard Test Method for the Analysis of Refrigerant 114, Plus Other Carbon-Containing and Fluorine-Containing Compounds in Uranium Hexafluoride via Fourier-Transform Infrared (FTIR) Spectroscopy |
| ASTM C 1445-1999 |
使用流動性試驗臺測量澆鑄耐火材料一致性的標準試驗方法 |
Standard Test Method for Measuring Consistency of Castable Refractory Using a Flow Table |
| ASTM C 1446-1999 |
測量自流式澆鑄耐火材料一致性和工作時間的標準試驗方法 |
Standard Test Method for Measuring Consistency and Working Time of Self-Flowing Castable Refractories |
| ASTM C 1447-1999 |
非石棉纖維水泥地下排水管標準規范 |
Standard Specification for Non-Asbestos Fiber-Cement Underdrain Pipe |
| ASTM C 1448-1999 |
非石棉纖維水泥管標準規范 |
Standard Specification for Non-Asbestos Fiber-Cement Conduit |
| ASTM C 1449-1999 |
非石棉纖維水泥無壓污水管標準規范 |
Standard Specification for Non-Asbestos Fiber-Cement Nonpressure Sewer Pipe |
| ASTM C 1450-1999 |
非石棉纖維水泥雨水排水管標準規范 |
Standard Specification for Non-Asbestos Fiber-Cement Storm Drain Pipe |
| ASTM C 1450/C 1450M-2001 |
非石棉纖維水泥排雨水管的標準規范 |
Standard Specification for Non-Asbestos Fiber-Cement Storm Drain Pipe |
| ASTM C 1450/C 1450Ma-2001 |
非石棉纖維水泥陣雨排水管標準規范 |
Standard Specification for Non-Asbestos Fiber-Cement Storm Drain Pipe |
| ASTM C 1451-1999 |
測定單一來源混凝土配料勻細度的標準實施規程 |
Standard Practice for Determining Uniformity of Ingredients of Concrete From a Single Source |
| ASTM C 1458-2000 |
用量熱分析進行钚、氚和241Am無損試驗的標準試驗方法 |
Standard Test Method for Nondestructive Assay of Plutonium, Tritium and 241Am by Calorimetric Assay |
| ASTM C 1493-2001 |
用差動衰減系統鈍化-活化中子計數法對廢物中的核物質進行無損分析的標準試驗方法 |
Standard Test Method for Non-Destructive Assay of Nuclear Material in Waste by Passive and Active Neutron Counting Using a Differential Die-Away System |
| ASTM C 1494-2001 |
測定氮化硅粉末中碳、氮、氧的質量比值的標準試驗方法 |
Standard Test Methods for Determination of Mass Fraction of Carbon, Nitrogen, and Oxygen in Silicon Nitride Powder |
| ASTM C 1495-2001 |
表面研磨對高級陶瓷抗彎強度影響的標準試驗方法 |
Standard Test Method for Effect of Surface Grinding on Flexure Strength of Advanced Ceramics |
| ASTM C 1496-2001 |
外部石墻和表面的評價和維護標準指南 |
Standard Guide for Assesment and Maintenance of Exterior Dimension Stone Masonry Walls and Facades |
| ASTM C 1497-2001 |
纖維素纖維穩定熱絕緣的標準規范 |
Standard Specification for Cellulosic Fiber Stabilized Thermal Insulation |
| ASTM C 1498-2001 |
建筑材料的吸濕等熱性的標準試驗方法 |
Standard Test Method for Hygroscopic Sorption Isotherms of Building Materials |
| ASTM C 482-1981 |
瓷磚和硅酸鹽水泥粘著強度的試驗方法 |
Test Method for Bond Strength of Ceramic Tile to Portland Cement |
| ASTM C 531-2000 |
耐化學腐蝕的灰漿、薄漿、整體面層和聚合物混凝土的熱膨脹系數和線收縮性的標準試驗方法 |
Standard Test Method for Linear Shrinkage and Coefficient of Thermal Expansion of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes |
| ASTM C 534-1999 |
片狀和管狀預制韌性彈性的蜂窩狀絕熱材料 |
Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form |
| ASTM C 579-1996 |
耐化學腐蝕的灰漿、薄漿及整體面層的抗壓強度的試驗方法 |
Test Method for Compressive Strength of Chemical-Resistant Mortars, Grouts and Monolithic Surfacings and Polymer Concretes |
| ASTM C 580-1998 |
耐化學侵蝕的灰漿,簿漿及整體面層的撓性強度和彈性模量的試驗方法 |
Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts and Monolithic Surfacings |
| ASTM C 581-1994 |
作為液體工作用玻璃纖維增強結構的熱固樹脂的耐化學腐蝕試驗方法 |
Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service |
| ASTM C 582-1995 |
在化學藥品環境中使用的自承重結構用增強塑料層壓材料 |
Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion Resistant Equipment |
| ASTM C 583-1980 |
在高溫下耐火材料的撓折模量的試驗方法 |
Test Method for Modulus of Rupture of Refractory Materials at Elevated Temperatures |
| ASTM C 584-1981 |
衛生陶瓷器具和有關制品的透光光澤度的試驗方法 |
Test Method for Specular Gloss of Glazed Ceramic Whitewares and Related Products |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com