標準號 |
中文名稱 |
英文名稱 |
| ASTM C 1017-1992 |
生產流態混凝土用化學摻和劑 |
Chemical Admixtures for Use in Producing Flowing Concrete |
| ASTM C 1017/C 1017M-1998 |
生產流動混凝土用的化學混合物 |
Chemical Admixtures for Use in Producing Flowing Concrete |
| ASTM C 1018-1997 |
纖維增強混凝土的撓曲韌性和第一次破裂強度的試驗方法(使用三點 荷載的支梁) |
Test Method for Flexural Toughness and First-Crack Strength of Fiber-Reinforced Concrete (Using Beam with Third-Point Loading) |
| ASTM C 1019-2000 |
灌漿取樣和試驗的標準試驗方法 |
Standard Test Method for Sampling and Testing Grout |
| ASTM C 1020-1984 |
輕水堆燃料回收用容器 |
Matrix for Light Water Reactor Fuel Reprocessing |
| ASTM C 1021-2001 |
建筑密封料試驗用實驗室的標準實施規程 |
Standard Practice for Laboratories Engaged in the Testing of Building Sealants |
| ASTM C 1022-1993 |
濃縮鈾礦石的化學分析和原子吸收分析的試驗方法 |
Test Methods for Chemical and Atomic Absorption Analysis of Uranium-Ore Concentrate |
| ASTM C 1023-1987 |
久用不危害健康的衛生陶瓷裝璜標簽 |
Labeling Ceramic Art Materials for Chronic Adverse Health Hazards |
| ASTM C 1025-1991 |
石墨電極芯撓曲斷裂模數的試驗方法 |
Test Method for Modulus of Rupture in Bending of Electrode Graphite |
| ASTM C 1026-1987 |
測定瓷磚耐凍熔變化的試驗方法 |
Test Method for Measuring the Resistance of Ceramic Tile to Freeze-Thaw Cycling |
| ASTM C 1027-1999 |
上釉瓷磚表觀耐磨損的試驗方法 |
Test Method for Determining Visible Abrasion Resistance of Glazed Ceramic Tile (1990) |
| ASTM C 1028-1996 |
用水平功率拉力計法估價瓷磚及其它相同表面的磨擦電系數的試驗方法 |
Test Method for Determining the Static Coefficient of Friction of Ceramic Tile and Other Like Surfaces by the Horizontal Dynamometer Pull-Meter Method |
| ASTM C 1029-1996 |
噴施的剛性蜂窩狀聚氨基甲酸乙酯絕熱材料 |
Spray-Applied Rigid Cellular Polyurethane Thermal Insulation |
| ASTM C 1031-1997 |
核純級的氧化鋁粉末 |
Nuclear-Grade Aluminum Oxide Powder |
| ASTM C 1032-1996 |
鋼絲網抹灰底層 |
Woven Wire Plaster Base |
| ASTM C 1033-1985 |
垂直安裝的絕熱管的穩態熱傳遞性能的測試方法 |
Test Method for Steady-State Heat Transfer Properties of Pipe Insulation Installed Vertically |
| ASTM C 1034-1985 |
從上釉陶瓷烹調器上提取鉛和鎘的試驗方法 |
Test Method for Lead and Cadmium Extracted from Glazed Ceramic Cookwear |
| ASTM C 1035-1985 |
從上釉的陶瓷烹調器中提取的鉛和鎘 |
Lead and Cadmium Extracted from Glazed Ceramic Cookwear |
| ASTM C 1036-2001 |
平面玻璃標準規范 |
Standard Specification for Flat Glass |
| ASTM C 1037-1985 |
公用事業用地下預制混凝土的檢驗 |
Inspection of Underground Precast Concrete Utility Structures |
| ASTM C 1038-2001 |
存放在水中的水硬性水泥灰漿棒膨脹的標準試驗方法 |
Standard Test Method for Expansion of Hydraulic Cement Mortar Bars Stored in Water |
| ASTM C 1039-1985 |
石墨電極的表觀孔隙率、表觀比重和松密度的試驗方法 |
Test Methods for Apparent Porosity, Apparent Specific Gravity and Bulk Density of Graphite Electrodes |
| ASTM C 1040-1993 |
用核子方法在適當位置測定硬化和未硬化混凝土密度的試驗方法 |
Test Methods for Density of Unhardened and Hardened Concrete in Place by Nuclear Methods |
| ASTM C 1041-1985 |
使用熱通量轉換器現場測定工業絕熱材料的熱通量 |
In-Situ Measurements of Heat Flux in Industrial Thermal Insulation Using Heat Flux Transducers |
| ASTM C 1042-1999 |
使用斜剪切法測定同混凝土一起使用的乳膠粘著強度的測試方法 |
Test Method for Bond Strength of Latex Systems Used with Concrete by Slant Shear |
| ASTM C 1043-1997 |
使用護熱板裝置中線電源加熱器時穩態熱傳導特性測量用的加熱板溫度的測定 |
Determination of Hot-Plate Temperature When Using a Line Source Heater in the Guarded-Hot-Plate Apparatus for Measurement of Steady-State Thermal Transmission Properties |
| ASTM C 1044-1998 |
使用單面護熱板設備測量穩態熱通量和熱傳遞性能 |
Using the Guarded-Hot-Plate Apparatus in the One-Sided Mode to Measure Steady-State Heat Flux and Thermal Transmission Properties |
| ASTM C 1045-2001 |
在穩態條件下計算熱傳遞性能的標準規程 |
Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions |
| ASTM C 1046-1995 |
建筑物外殼構件的熱通量和溫度的現場測量 |
In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components |
| ASTM C 1047-1999 |
石膏墻板和石膏飾面底用附件 |
Accessories for Gypsum Wallboard and Gypsum Veneer Base |
| ASTM C 1048-1997 |
熱處理平板玻璃、完全回火涂層玻璃和完全回火無涂層玻璃 |
Heat-Treated Flat Glass - Kind HS, Kind FT Coated and Uncoated Glass |
| ASTM C 1049-1985 |
粒狀松散填塞絕熱材料的安裝 |
Installation of Granular Loose-Fill Thermal Insulation |
| ASTM C 1050-1991 |
剛性蜂窩狀聚氨基甲酸乙酯--纖維素纖維組合屋面絕緣材料 |
Rigid Cellular Polystyrene-Cellulosic Fiber Composite Roof Insulation |
| ASTM C 1051-1985 |
液體金屬冷卻反應堆用的鈉冷卻劑 |
Sodium (Na) as a Coolant for Liquid Metal-Cooled Reactors |
| ASTM C 1052-2001 |
液體六氟化鈾散裝取樣標準實施規程 |
Standard Practice for Bulk Sampling of Liquid Uranium Hexafluoride |
| ASTM C 1053-2000 |
排水溝、污水溝和排出口用的硼硅酸鹽玻璃管和配件的標準規范 |
Standard Specification for Borosilicate Glass Pipe and Fittings for Drain, Waste, and Vent (DWV) Applications |
| ASTM C 1054-1985 |
壓制的和干燥塑性耐火材料及搗實混合樣品 |
Pressing and Drying Refractory Plastic and Ramming Mix Specimens |
| ASTM C 1055-1999 |
引起接觸燒傷的加熱系統的表面調理 |
Heated System Surface Conditions That Produce Contact Burn Injuries |
| ASTM C 1057-1992 |
使用數學模型和Thermesthesiometer測定加熱表面表層接觸溫度 |
Determination of Skin Contact Temperature from Heated Surfaces Using a Mathematical Model and Thermesthesiometer |
| ASTM C 1058-1997 |
評價和報告絕熱材料熱性能用溫度的選擇 |
Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation |
| ASTM C 1059-1999 |
硬化混凝土保持新鮮用乳膠作用劑 |
Latex Agents for Bonding Fresh to Hardened Concrete |
| ASTM C 1060-1990 |
框架建筑物外殼內腔的絕熱設施的溫度記錄檢驗 |
Thermographic Inspection of Insulation Installations in Envelope Cavities of Frame Buildings |
| ASTM C 1062-2000 |
核燃料溶解裝置的設計、制造和安裝標準指南 |
Standard Guide for Design, Fabrication, and Installation of Nuclear Fuel Dissolution Facilities |
| ASTM C 1063-1999 |
硅酸鹽水泥基灰泥用板條和襯條的安裝 |
Installation of Lathing and Furring for Portland Cement-Based Plaster |
| ASTM C 1064-1986 |
硅酸鹽水泥混凝土溫度的試驗方法 |
Test Method for Temperature of Freshly Mixed Portland Cement Concrete |
| ASTM C 1064/C 1064M-1999 |
新拌硅酸鹽水泥混凝土溫度的試驗方法 |
Test Method for Temperature of Freshly Mixed Portland Cement Concrete |
| ASTM C 1065-1993 |
核純級氧化鋯粉末 |
Nuclear-Grade Zirconium Oxide Powder |
| ASTM C 1066-1997 |
核純級氧化鋯 |
Nuclear Grade Zirconium Oxide Pellets |
| ASTM C 1067-2000 |
建筑材料試驗方法的耐久或屏蔽程序?qū)嵤┑臉?biāo)準實施規程 |
Standard Practice for Conducting A Ruggedness or Screening Program for Test Methods for Construction Materials |
| ASTM C 1068-1996 |
核工業實驗室測量方法的認證 |
Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry |
| ASTM C 1069-1986 |
用氮吸附法測定氧化鋁和石英表面特性的試驗方法 |
Test Method for Specific Surface Area of Alumina or Quartz by Nitrogen Adsorption |
| ASTM C 1070-1986 |
用激光擴散法測定氧化鋁和石英粒度分布的試驗方法 |
Test Method for Determining Particle Size Distribution of Alumina or Quartz by Laser Light Scattering |
| ASTM C 1071-1998 |
絕熱和隔音材料(玻璃纖維和管道襯里材料) |
Thermal and Acoustical Insulation (Glass Fiber, Duct Lining Material) |
| ASTM C 1072-2000 |
砌塊抗彎粘結強度測定的標準試驗方法 |
Standard Test Method for Measurement of Masonry Flexural Bond Strength |
| ASTM C 1073-1997 |
用堿性反應法測定塊爐渣水硬效率的試驗方法 |
Test Method for Hydraulic Activity of Ground Slag by Reaction with Alkali |
| ASTM C 1074-1998 |
用硬化法評定混凝土強度 |
Estimating Concrete Strength by the Maturity Method |
| ASTM C 1075-1993 |
鈾精礦取樣 |
Sampling Uranium-Ore Concentrate |
| ASTM C 1076-1997 |
核純級氧化鉿丸 |
Nuclear Grade Hafnium Oxide Pellets |
| ASTM C 1077-2002 |
建筑用混凝土和混凝土集料的實驗室測試標準實施規范和實驗室評定標準 |
Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation |
| ASTM C 1078-1987 |
測定新攪拌混凝土中水泥含量的試驗方法 |
Test Methods for Determining the Cement Content of Freshly Mixed Concrete |
| ASTM C 1079-1987 |
測定新攪拌混凝土中水含量的試驗方法 |
Test Methods for Determining the Water Content of Freshly Mixed Concrete |
| ASTM C 108-1946 |
熱傳導用符號 |
Symbols for Heat Transmission |
| ASTM C 1080-1998 |
冷卻塔用除填料以外的石棉水泥制品 |
Asbestos-Cement Products Other Than Fill for Cooling Towers |
| ASTM C 1081-1998 |
冷卻塔用石棉水泥波狀填料 |
Asbestos-Cement Corrugated Fill for Use in Cooling Towers |
| ASTM C 1082-1998 |
冷卻塔填塞用石棉水泥平板 |
Asbestos-Cement Flat Sheet for Cooling Tower Fill |
| ASTM C 1083-2000 |
彈性泡沫墊圈和密封材料吸水性的標準試驗方法 |
Standard Test Method for Water Absorption of Cellular Elastomeric Gaskets and Sealing Materials |
| ASTM C 1084-2002 |
硬化水硬水泥混凝土的硅酸鹽水泥含量的標準試驗方法 |
Standard Test Method for Portland-Cement Content of Hardened Hydraulic-Cement Concrete |
| ASTM C 1086-1996 |
玻璃纖維油毛氈的熱絕緣 |
Glass Fiber Felt Thermal Insulation |
| ASTM C 1087-2000 |
測定門窗玻璃結構裝置中與附件一同使用的液態密封料相容性的標準試驗方法 |
Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems |
| ASTM C 1088-2001 |
粘土或泥板巖制薄陶面磚標準規范 |
Standard Specification for Thin Veneer Brick Units Made From Clay or Shale |
| ASTM C 1088a-2001 |
粘土或頁巖制薄飾面磚的標準規范 |
Standard Specification for Thin Veneer Brick Units Made From Clay or Shale |
| ASTM C 1089-1997 |
離心鑄造的預應力混凝土竿材 |
Spun Cast Prestressed Concrete Poles |
| ASTM C 109/C 109M-2001 |
水硬水泥灰漿的抗壓強度標準試驗方法(使用2英寸或50毫米立方體試樣) |
Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens) |
| ASTM C 1090-2001 |
水硬水泥砂漿制圓柱形試樣高度變化測量的標準試驗方法 |
Standard Test Method for Measuring Changes in Height of Cylindrical Specimens from Hydraulic-Cement Grout |
| ASTM C 1091-1999 |
陶土管道的液體滲入和滲出的試驗方法 |
Test Method for Hydrostatic Infiltration and Exfiltration Testing of Vitrified Clay Pipe Lines |
| ASTM C 1093-1995 |
砌塊試驗方法的鑒定 |
Accreditation of Testing Agencies for Unit Masonry |
| ASTM C 1094-2001 |
可移動的撓性絕熱覆蓋物標準指南 |
Standard Guide for Flexible Removable Insulation Covers |
| ASTM C 1096-1991 |
石棉水泥中木纖維含量的測定方法 |
Test Method for Determination of Wood Fiber in Asbestos Cement |
| ASTM C 1097-1995 |
瀝青混凝土混合物用熟石灰 |
Hydrated Lime for Use in Asphaltic-Concrete Mixtures |
| ASTM C 1098-1993 |
核純級氧化鉿粉末 |
Nuclear-Grade Hafnium Oxide Powder |
| ASTM C 1099-1992 |
高溫含碳耐火材料斷裂模數試驗方法 |
Test Method for Modulus of Rupture of Carbon-Containing Refractory Materials at Elevated Temperatures |
| ASTM C 11-2002 |
石膏及相關建筑材料和系統的標準術語 |
Standard Terminology Relating to Gypsum and Related Building Materials and Systems |
| ASTM C 110-2000 |
生石灰、熟石灰和石灰石的標準物理試驗方法 |
Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone |
| ASTM C 1100-1988 |
耐火材料帶狀熱沖擊試驗的試驗方法 |
Test Method for Ribbon Thermal Shock Testing of Refractory Materials |
| ASTM C 1101/C 1101M-1995 |
絕熱礦物纖維套及板撓性或剛性分類試驗方法 |
Test Methods for Classifying the Flexibility or Rigidity of Mineral Fiber Blanket and Board Insulation |
| ASTM C 1102-1994 |
吉爾摩水泥稠度試驗針測定噴漿混凝土用含加速添加劑的硅酸鹽水泥灰漿凝固時間的方法 |
Test Method for Time of Setting of Portland-Cement Pastes Containing Accelerating Admixtures for Shotcrete by the Use of Gillmore Needles |
| ASTM C 1103-1994 |
安裝完畢的預制混凝土污水管線接頭的校驗 |
Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines |
| ASTM C 1103M-1994 |
安裝完畢的預制混凝土污水管線接頭的校驗(米制) |
Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines (Metric) |
| ASTM C 1104/C 1104M-1995 |
測定未覆面礦物纖維絕緣材料蒸汽的吸收率的試驗方法 |
Test Method for Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation |
| ASTM C 1105-1995 |
由于堿金屬碳酸鹽礦石反應引起混凝土長度變化的試驗方法 |
Test Method for Length Change of Concrete Due to Alkali-Carbonate Rock Reaction |
| ASTM C 1106-1988 |
碳磚耐化學性及物理特性的試驗方法 |
Test Methods for Chemical Resistance and Physical Properties of Carbon Brick |
| ASTM C 1107-1999 |
干包裝水硬水泥砂漿(非收縮的) |
Packaged Dry, Hydraulic-Cement Grout (Nonshrink) |
| ASTM C 1108-1999 |
控制電勢庫侖法測定钚的試驗方法 |
Test Method for Plutonium by Controlled-Potential Coulometry |
| ASTM C 1109-1998 |
使用電感耦合等離子-原子發射光譜法對核廢料中浸出液分析試驗方法 |
Test Method for Analysis of Aqueous Leachates from Nuclear Waste Materials Using Inductively Coupled Plasma-Atomic Emission Spectrometry |
| ASTM C 1110-1988 |
使用玻璃熔化或壓制粉末法制備礦石中鈾X射線發射光譜分析用樣品 |
Sample Preparation for X-Ray Emission Spectrometric Analysis of Uranium in Ores Using the Glass Fusion or Pressed Powder Method |
| ASTM C 1111-1998 |
電感耦合等離子-原子發射光譜法測定污水流中素的試驗方法 |
Test Method for Determining Elements in Waste Streams by Inductively Coupled Plasma-Atomic Emission Spectroscopy |
| ASTM C 1112-1999 |
特種核材料的控制和物理安全用輻射監控器的應用 |
Application of Radiation Monitors to the Control and Physical Security of Special Nuclear Material |
| ASTM C 1113-1999 |
用熱金屬絲(鉑阻尼式溫度計技術)測定耐火制品的導熱性的試驗方法 |
Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique) |
| ASTM C 1114-1998 |
薄加熱設備穩態熱傳導特性的試驗方法 |
Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus |
| ASTM C 1115-2000 |
密實彈性硅橡膠襯墊和附件標準規范 |
Standard Specification for Dense Elastomeric Silicone Rubber Gaskets and Accessories |
| ASTM C 1116-2002 |
纖維增強混凝土及噴漿混凝土的標準規范 |
Standard Specification for Fiber-Reinforced Concrete and Shotcrete |
| ASTM C 1117-1989 |
抗穿透性法測定噴漿混凝土混合料的凝固時間試驗方法 |
Test Method for Time of Setting of Shotcrete Mixtures by Penetration Resistance |
| ASTM C 1118-1989 |
波長色散X射線熒光系統件選擇 |
Selecting Components for Wavelength-Dispersive X-Ray Fluorescence (XRF) Systems |
| ASTM C 1119-1990 |
石棉水泥混合料真空排放的試驗方法 |
Test Method for Vacuum Drainage of Asbestos-Cement Mixes |
| ASTM C 1120-1998 |
石棉清洗試驗方法 |
Test Method for Wash Test of Asbestos |
| ASTM C 1121-1990 |
石棉的T/N濕度分類試驗方法 |
Test Method for Turner and Newall (T and N) Wet-Length Classification of Asbestos |
| ASTM C 1122-1990 |
石棉的濕體積的試驗方法 |
Test Method for Wet Volume of Asbestos |
| ASTM C 1123-1990 |
石棉的可壓縮性和恢復試驗方法 |
Test Method for Compressibility and Recovery of Asbestos |
| ASTM C 1124-1990 |
石棉煤油保存的試驗方法 |
Test Method for Kerosene Retention of Asbestos |
| ASTM C 1125-1989 |
石棉滲透指數試驗方法 |
Test Method for Penetration Index of Asbestos |
| ASTM C 1126-1998 |
覆面或未覆面剛性多孔酚醛熱絕緣材料 |
Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation |
| ASTM C 1127-2001 |
有整體磨損表面的高固體含量及冷液處理的彈性防水薄膜材料的應用標準指南 |
Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with an Integral Wearing Surface |
| ASTM C 1128-1995 |
核燃料循環材料分析用操作參考材料的制備 |
Preparation of Working Reference Materials for Use in the Analysis of Nuclear Fuel Cycle Materials |
| ASTM C 1129-1989 |
通過給凸面閥門及法蘭增加熱絕緣材料評估蓄熱量 |
Estimation of Heat Savings by Adding Thermal Insulation to Bare Valves and Flanges |
| ASTM C 113-1993 |
耐火磚的二次加熱變化的試驗方法 |
Test Method for Reheat Change of Refractory Brick |
| ASTM C 1130-1990 |
微型熱流量傳感器的校正 |
Calibrating Thin Heat Flux Transducers |
| ASTM C 1131-1995 |
混凝土涵洞,雨水溝,排污溝系統的最低成本(使用周期)的標準規范 |
Standard Practice for Least Cost (Life Cycle) Analysis of Concrete Culvert, Storm Sewer, and Sanitary Sewer Systems |
| ASTM C 1132-1995 |
熱流量計裝置的校正 |
Calibration of the Heat Flow Meter Apparatus |
| ASTM C 1133-1996 |
分段無源γ射線掃描法對低密度廢品及殘渣中特殊核材料進行無損檢驗的方法 |
Test Method for Nondestructive Assay of Special Nuclear Material in Low Density Scrap and Waste by Segmented Passive Gamma-Ray Scanning |
| ASTM C 1134-1990 |
部分浸入后剛性熱絕緣材料水分保持試驗方法 |
Test Method for Water Retention of Rigid Thermal Insulations Following Partial Immersion |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com