標準號 |
中文名稱 |
英文名稱 |
| ASTM E 1171-2001 |
在循環溫度和濕度環境下光電模數的標準試驗方法 |
Standard Test Method for Photovoltaic Modules in Cyclic Temperature and Humidity Environments |
| ASTM E 1172-1987 |
波長擴散X射線分光儀的描述和規定 |
Describing and Specifying a Wavelength-Dispersive X-Ray Spectrometer |
| ASTM E 1173-2001 |
評定手術前和導管插入術前或注射前皮膚處理的標準試驗方法 |
Standard Test Method of a Evaluation of a Preoperative, Precatheterization, or Preinjection Skin Preparations |
| ASTM E 1174-1994 |
評價衛生保健人員洗手模式的測試方法 |
Test Method for Evaluation of Health Care Personnel Handwash Formulation |
| ASTM E 1175-1987 |
用大直經積分球測定材料的太陽能或光反射性,透明性和吸收性的試驗方法 |
Test Method for Determining Solar or Photopic Reflectance, Transmittance and Absorptance of Materials Using a Large Diameter Integrating Sphere |
| ASTM E 1177-1998 |
防凍級乙二醇 |
Anti-Freeze Grade Ethylene Glycol |
| ASTM E 1178-1997 |
丙烯腈分析的測試法 |
Test Methods for Analysis of Acrylonitrile |
| ASTM E 1179-1987 |
敞開式辦公室件和系統測試用聲源 |
Sound Sources Used for Testing Open Office Components and Systems |
| ASTM E 118-1989 |
銅鉻合金的化學分析試驗方法 |
Test Methods for Chemical Analysis of Copper-Chromium Alloys |
| ASTM E 1180-1994 |
宏觀結構檢驗用硫印痕制備 |
Preparing Sulfur Prints for Macrostructural Examination |
| ASTM E 1181-1987 |
描述雙重粒度特性的測試方法(代替 SAM AMS 2316A) |
Test Methods for Characterizing Duplex Grain Sizes (Superseding SAE AMS 2316A) |
| ASTM E 1182-2001 |
用徑向切割法測量表層厚度的標準試驗方法 |
Standard Test Method for Measurement of Surface Layer Thickness by Radial Sectioning |
| ASTM E 1183-1987 |
為進一步分析用的風干回收廢燃料RD-5的試驗方法 |
Test Method for Air Drying RDF-5 for Further Analysis |
| ASTM E 1184-1998 |
電熱(石墨加熱爐)原子吸收分析 |
Electrothermal (Graphite Furnace) Atomic Absorption Analysis |
| ASTM E 1185-1993 |
為評估在建筑物和建筑系統上投資對經濟方法的選擇 |
Selecting Economic Methods for Evaluating Investments in Buildings and Building Systems |
| ASTM E 1186-1998 |
建筑物外層漏氣的現場檢驗 |
Air Leakage Site Detection in Building Envelopes |
| ASTM E 1187-1997 |
與實驗室認可相關的標準術語 |
Standard Terminology Relating to Laboratory Accreditation |
| ASTM E 1188-1995 |
通過技術調研人員對信息和物理項進行收集和保存 |
Collection and Preservation of Information and Physical Items by a Technical Investigator |
| ASTM E 1189-1987 |
微型滴定管(科赫型) |
Micro-Burets (Koch Style) |
| ASTM E 119-2000 |
建筑結構和材料防火試驗的標準試驗方法 |
Standard Test Methods for Fire Tests of Building Construction and Materials |
| ASTM E 1190-1995 |
安裝在結構構件中的傳動粉料扣件強度的試驗方法 |
Test Methods for Strength of Powder-Actuated Fasteners Installed in Structural Members |
| ASTM E 1191-1997 |
用海水糠蝦進行生命周期毒性試驗指南 |
Conducting Life-Cycle Toxicity Tests with Saltwater Mysids |
| ASTM E 1192-1997 |
用魚、大型無脊椎動物和兩棲動物身上流出的含水物質進行劇毒試驗 |
Conducting Acute Toxicity Tests on Aqueous Effluents with Fishes, Macroinvertebrates and Amphibians |
| ASTM E 1193-1997 |
用水蚤屬magna進行延長生命周期毒性試驗 |
Conducting Renewal Life-Cycle Toxicity Tests with Daphnia magna |
| ASTM E 1194-1987 |
蒸氣壓力的試驗方法 |
Test Method for Vapor Pressure |
| ASTM E 1195-1987 |
測量土壤和沉積物中有機化學藥物吸收常數(Koc)的試驗方法 |
Test Method for Determining a Sorption Constant (Koc) for an Organic Chemical in Soil and Sediments |
| ASTM E 1197-1987 |
進行陸地土壤芯樣縮影測試的指南 |
Conducting a Terrestrial Soil-Core Microcosm Test |
| ASTM E 1198-1987 |
用泵采集浮流生物 |
Sampling Zooplankton with Pumps |
| ASTM E 1199-1987 |
用克--朋氏浮游生物采樣器采集浮游生物 |
Sampling Zooplankton with a Clarke-Bumpus Plankton Sampler |
| ASTM E 12-1970 |
固體、液體及氣體密度和比重的有關術語 |
Terminology Relating to Density and Specific Gravity of Solids, Liquids and Gases |
| ASTM E 120-2000 |
鈦和鈦合金化學分析的標準試驗方法 |
Standard Test Methods for Chemical Analysis of Titanium and Titanium Alloys |
| ASTM E 1200-1987 |
浮游生物防腐 |
Preserving Zooplankton Samples |
| ASTM E 1201-1987 |
用圓錐形拖網采集浮游生物 |
Sampling Zooplankton with Conical Tow Nets |
| ASTM E 1202-1987 |
開發微核檢測標準 |
Development of Micronucleus Assay Standards |
| ASTM E 1203-1998 |
含水毒理學中動物試驗用作為受試動物食品的海水小蝦類 |
Using Brine Shrimp Nauplii as Food for Test Animals in Aquatic Toxicology |
| ASTM E 1204-1997 |
食品加工用γ輻射裝置在操作和特性上的劑量測定的應用 |
Application of Dosimetry in the Characterization and Operation of a Gamma Irradiation Facility for Food Processing |
| ASTM E 1205-1999 |
用高鈰-三價鈰硫酸劑量儀測定水中的吸收劑量的試驗方法 |
Test Method for Using the Ceric-Cerous Sulfate Dosimeter to Measure Absorbed Dose in Water |
| ASTM E 1206-1987 |
現有設備的計算機化 |
Computerization of Existing Equipment |
| ASTM E 1207-1987 |
腋下除臭劑的感覺評定 |
Sensory Evaluation of Axillary Deodorancy |
| ASTM E 1208-1999 |
用親油的乳化法作熒光液體滲透檢驗的試驗方法 |
Test Method for Fluorescent Liquid Penetrant Examination Using the Lipophilic Post-Emulsification Process |
| ASTM E 1209-1999 |
用可水洗法作熒光液體滲透檢驗的試驗方法 |
Test Method for Fluorescent Liquid Penetrant Examination Using the Water-Washable Process |
| ASTM E 121-1983 |
銅碲合金的化學分析試驗方法 |
Test Methods for Chemical Analysis of Copper-Tellurium Alloys |
| ASTM E 1210-1999 |
用親水的乳化法作熒光液體滲透檢驗的試驗方法 |
Test Method for Fluorescent Liquid Penetrant Examination Using the Hydrophilic Post-Emulsification Process |
| ASTM E 1211-1997 |
用表面安裝的聲輻射探測器作泄漏探測和定位 |
Leak Detection and Location Using Surface-Mounted Acoustic Emission Sensors |
| ASTM E 1212-1999 |
無損檢驗機構質量控制體系的建立和維護 |
Establishment and Maintenance of Quality Control Systems for Nondestructive Testing Agencies |
| ASTM E 1213-1997 |
熱成像系統用可分辨的最小溫度差的試驗方法 |
Test Method for Minimum Resolvable Temperature Difference for Thermal Imaging Systems |
| ASTM E 1214-1987 |
反應堆堆芯壓力容器監測用熔絲溫度監視器的使用 |
Use of Melt Wire Temperature Monitors for Reactor Vessel Surveillance, E 706 (IIIE) |
| ASTM E 1215-1993 |
測量車輛對道路粗糙度的行車響應用掛車 |
Trailers Used for Measuring Vehicle Response to Road Roughness |
| ASTM E 1216-1999 |
用膠帶提取法對表面微粒子污染取樣的標準規程 |
Standard Practice for Sampling for Particulate Contamination by Tape Lift |
| ASTM E 1217-2000 |
用X射線光電子光譜儀和俄歇電子光譜儀測定影響檢測信號的樣品面積的標準實施規范 |
Standard Practice for Determination of the Specimen Area Contributing to the Detected Signal in Auger Electron Spectrometers and Some X-Ray Photoelectron Spectrometers |
| ASTM E 1218-1997 |
用微型海藻作靜態96-H毒性試驗 |
Conducting Static 96-H Toxicity Tests with Microalgae |
| ASTM E 1219-1999 |
用可移動溶劑法作熒光液體滲透檢驗的試驗方法 |
Test Method for Fluorescent Liquid Penetrant Examination Using the Solvent-Removable Process |
| ASTM E 122-1999 |
為估算一批產品或者一次加工過程的制品的質量對樣品尺寸的選擇的標準規程 |
Standard Practice for Choice of Sample Size to Estimate a Measure of Quality for a Lot or Process |
| ASTM E 1220-1999 |
用可移動溶劑法作可視性液體滲透檢驗的試驗方法 |
Test Method for Visible Liquid Penetrant Examination Using the Solvent-Removable Process |
| ASTM E 1221-1996 |
測定Kla鐵素體鋼的平面應變,斷裂抑制,破裂韌性的試驗方法 |
Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, Kla, of Ferritic Steels |
| ASTM E 1222-1990 |
管子護套裝置安放損耗的實驗室測量用試驗方法 |
Test Method for the Laboratory Measurement of the Insertion Loss of Pipe Lagging Systems |
| ASTM E 1224-1994 |
實驗室鑒定用試驗區分類 |
Categorizing Fields of Testing for Laboratory Acceditation Purposes |
| ASTM E 1225-1999 |
通過隔絕--比較--軸向熱流技術對固體導熱性的試驗方法 |
Test Method for Thermal Conductivity of Solids by Means of the Guarded-Comparative-Longitudinal Heat Flow Technique |
| ASTM E 1226-2000 |
可燃粉劑用壓力和壓力提高率的標準試驗方法 |
Standard Test Method for Pressure and Rate of Pressure Rise for Combustible Dusts |
| ASTM E 1228-1994 |
過氧脂化驗分析的測試方法.催化碘滴定法 |
Test Method for Assay of Peroxy Esters - Catalyzed Iodometric Procedure |
| ASTM E 1229-1993 |
次氯酸鈣 |
Calcium Hypochlorite |
| ASTM E 123-1992 |
蒸餾法水分測定裝置 |
Apparatus for Determination of Water by Distillation |
| ASTM E 1230-1996 |
近似測定無水氟化氫中碳?xì)浠衔锏头肿恿康臏y試方法 |
Test Method for the Approximate Determination of Low Molecular Weight Hydrocarbons in Anhydrous Hydrogen Fluoride |
| ASTM E 1231-2001 |
熱不穩定材料危害潛在靈敏值計算的標準實施規程 |
Standard Practice for Calculation of Hazard Potential Figures-of-Merit for Thermally Unstable Materials |
| ASTM E 1232-1991 |
化學藥劑可燃性溫度極限的試驗方法 |
Test Method for Temperature Limit of Flammability of Chemicals |
| ASTM E 1233-1996 |
用循環的靜態氣壓差法測定外窗,護墻及門結構性能的試驗方法 |
Test Method for Structural Performance of Exterior Windows, Curtain Walls and Doors by Cyclic Static Air Pressure Differential |
| ASTM E 1234-2001 |
宇宙飛船在環境受控區域內使用的不揮發殘留物取樣板的裝卸、運輸和安裝的標準實施規程 |
Standard Practice for Handling, Transporting, and Installing Nonvolatile Residue (NVR) Sample Plates Used in Environmentally Controlled Areas for Spacecraft |
| ASTM E 1234M-1995 |
在宇宙飛船人工控制環境中使用的揮發殘?jiān)影宓陌徇\(yùn),運輸和安裝標準試驗方法 |
Standard Practice for Handling, Transporting, and Installing Nonvolatile Residue (NVR) Sample Plates Used in Environmentally Controlled Areas for Spacecraft |
| ASTM E 1235M-1995 |
在宇宙飛船人工控制環境中揮發殘?jiān)亓繙y定的標準試驗方法(米制) |
Standard Test Method forr Gavimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft (Metric) |
| ASTM E 1236-1991 |
作為參照樣機的擺錘式?jīng)_擊試驗機的合格證明 |
Qualifying Charpy Impact Machines as Reference Machines |
| ASTM E 1237-1993 |
安裝耦合電阻應變儀 |
Installing Bonded Resistance Strain Gages |
| ASTM E 1238-1997 |
獨立計算機系統之間的可轉換臨床觀測 |
Transferring Clinical Observations Between Independent Computer Systems |
| ASTM E 1239-1994 |
自動化患者護理信息系統用預約/登記允許,出院,轉院系統的描述 |
Description of Reservation/ Registration-Admission, Discharge, Transfer (R-ADT) Systems for Automated Patient Care Information Systems |
| ASTM E 124-1994 |
微量化學分析用稱重和干燥裝置 |
Weighing and Drying Apparatus for Microchemical Analysis |
| ASTM E 1240-1988 |
風能轉換系統性能的測試方法 |
Test Method for Performance Testing of Wind Energy Conversion Systems |
| ASTM E 1241-1998 |
用魚進行早期生命階段毒性測試 |
Conducting Early Life-Stage Toxicity Tests with Fishes |
| ASTM E 1242-1997 |
用辛醇水分配系數測定魚因麻醉的中長致死濃度 |
Using Octanol-Water Partition Coefficient to Estimate Median Lethal Concentrations for Fish Due to Narcosis |
| ASTM E 1245-1995 |
用自動圖象分析測定包括鋼和其它金屬的含量 |
Determining Inclusion Content of Steel and Other Metals by Automatic Image Analysis |
| ASTM E 1246-2001 |
臨床實驗室計算機系統可靠性報告的標準規程 |
Standard Practice for Reporting Reliability of Clinical Laboratory Computer Systems |
| ASTM E 1247-1992 |
用分光光度法在物體色碼樣品中鑒別熒光粉的測試方法 |
Test Method for Identifying Fluorescence in Object-Color Specimens by Spectrophotometry |
| ASTM E 1248-1990 |
切碎機防爆 |
Shredder Explosion Protection |
| ASTM E 1249-1993 |
用鈷60源在硅電子裝置的輻射強度試驗中最小的劑量測定誤差 |
Minimizing Dosimetry Errors in Radiation Hardness Testing of Silicon Electronic Devices Using Co-60 Sources |
| ASTM E 125-1963 |
鐵鑄件的磁粉檢驗用參考照片 |
Reference Photographs for Magnetic Particle Indications on Ferrous Castings |
| ASTM E 1250-1988 |
評估硅電子器件輻射強度試驗用鈷60輻射源的低能γ成分的電離箱的應用 |
Application of Ionization Chambers to Assess the Low Energy Gamma Component of Cobalt-60 Irradiators Used in Radiation-Hardness Testing of Silicon Electronic Devices |
| ASTM E 1251-1994 |
用氬保護氣氛,點對面,單極自激發電容器放電法作鋁和鋁合金的光輻射光譜測定分析的測試方法 |
Test Method for Optical Emission Spectrometric Analysis of Aluminum and Aluminum Alloys by the Argon Atmosphere, Point-to-Plane, Unipolar Self-Initiating Capacitor Discharge |
| ASTM E 1252-1998 |
定性紅外線分析通用技術 |
General Techniques for Qualitative Infrared Analysis |
| ASTM E 1253-1999 |
輻照過的擺錘式?jīng)_擊試樣的復原 |
Reconstitution of Irradiated Charpy Specimens |
| ASTM E 1254-1998 |
射線照片和未曝光工業用射線照相膠片的儲存 |
Storage of Radiographs and Unexposed Industrial Radiographic Films |
| ASTM E 1255-1996 |
射線檢查法 |
Radioscopy |
| ASTM E 1256-1995 |
輻射式溫度計的測試方法(單波段型) |
Test Methods for Radiation Thermometers (Single Waveband Type) |
| ASTM E 1257-1993 |
用光譜化學分析法評定表面處理用研磨材料 |
Evaluating Grinding Materials Used for Surface Preparation in Spectrochemical Analysis |
| ASTM E 1258-1988 |
風扇增壓裝置氣流校正的試驗方法 |
Test Method for Airflow Calibration of Fan Pressurization Devices |
| ASTM E 1259-2001 |
沸騰溫度低于390℃的液體燃料中抗微生物劑評定的標準試驗方法 |
Standard Test Method for Evaluation of Antimicrobials in Liquid Fuels Boiling Below 390?C |
| ASTM E 126-1992 |
流體比重計檢驗和驗證的試驗方法 |
Test Method for Inspection and Verification of Hydrometers |
| ASTM E 1260-1995 |
用光學無圖信號光散射儀確定噴射時液滴尺寸特性的測試方法 |
Test Method for Determining Liquid Drop Size Characteristics in a Spray Using Optical Non-Imaging Light-Scattering Instruments |
| ASTM E 1261-2000 |
輻射處理用劑量測定體系的選擇和校準的標準指南 |
Standard Guide for Selection and Calibration of Dosimetry Systems for Radiation Processing |
| ASTM E 1262-1988 |
中國倉鼠卵巢細胞/次黃質鳥嘌呤轉磷酸核糖基酶基因變異鑒定的操作 |
Performance of the Chinese Hamster Ovary Cell/Hypoxanthine Guanine Phosphoribosyl Transferase Gene Mutation Assay |
| ASTM E 1263-1997 |
哺乳動物骨髓紅血球中微細胞核檢驗的實施 |
Conduct of Micronucleus Assays in Mammalian Bone Marrow Erythrocytes |
| ASTM E 1264-1998 |
吸音頂棚產品的分類 |
Classification for Acoustical Ceiling Products |
| ASTM E 1265-1990 |
氣動排氣消音器安放損耗測量用試驗方法 |
Test Method for Measuring Insertion Loss of Pneumatic Exhaust Silencers |
| ASTM E 1266-1988 |
結構填料和其它結構中用的石灰,飛灰和重金屬廢料混合物的處理 |
Processing Mixtures of Lime, Fly Ash and Heavy Metal Wastes in Structural Fills and Other Construction Applications |
| ASTM E 1268-2001 |
評定顯微結構帶狀物等級或取向的標準實施規范 |
Standard Practice for Assessing the Degree of Banding or Orientation of Microstructures |
| ASTM E 1269-2001 |
用差別掃描熱量測定儀測定特殊熱量的標準試驗方法 |
Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry |
| ASTM E 127-1998 |
超聲波標準鋁合金塊的制造及檢驗 |
Fabricating and Checking Aluminum Alloy Ultrasonic Reference Blocks |
| ASTM E 1270-1988 |
等臂天平的測試方法 |
Test Method for Equal Arm Balances |
| ASTM E 1271-1994 |
熱處理鋼的擺錘式?jīng)_擊檢驗試樣的合格化 |
Qualifying Charpy Verification Specimens of Heat-Treated Steel |
| ASTM E 1272-1995 |
帶刻度的圓柱形容器 |
Graduated Cylinders |
| ASTM E 1273-1988 |
可重復使用的實驗室移液管的色標 |
Color Coding of Reusable Laboratory Pipets |
| ASTM E 1274-1988 |
用驗平儀測量路面粗糙度的測試方法 |
Test Method for Measuring Pavement Roughness Using a Profilograph |
| ASTM E 1275-1998 |
放射鉻箔劑量測定系統的使用 |
Use of a Radiochromic Film Dosimetry System |
| ASTM E 1276-1996 |
有機玻璃劑量測定系統的使用 |
Use of a Polymethylmethacrylate Dosimetry System |
| ASTM E 1277-1996 |
用ICP(感耦等離子體)氬氣等離子體光譜測定法對鋅-5%鋁-鈰合金作化學分析的試驗方法 |
Test Method for Chemical Analysis of Zinc-5% Aluminum-Mischmetal Alloys by the ICP Argon Plasma Spectrometric Method |
| ASTM E 1278-1988 |
排除現場跟綜退役用放射通道的分類法 |
Radioactive Pathway Methodology for Release of Sites Following Decommissioning |
| ASTM E 1279-1989 |
用搖瓶衰減弱法作生物降解的試驗方法 |
Test Method for Biodegradation by a Shake-Flask Die-Away Method |
| ASTM E 128-1999 |
實驗室用剛性多孔過濾器的最大孔隙直經和滲透性的試驗方法 |
Test Method for Maximum Pore Diameter and Permeability of Rigid Porous Filters for Laboratory Use |
| ASTM E 1280-1997 |
哺乳動物細胞誘變性用老鼠淋巴瘤鑒定實施 |
Performing the Mouse Lymphoma Assay for Mammalian Cell Mutagenicity |
| ASTM E 1281-1989 |
核設備退役計劃 |
Nuclear Facility Decommissioning Plans |
| ASTM E 1282-1998 |
規定金屬及其合金的化學成分并選擇取樣的實際操作與定量分析方法 |
Specifying the Chemical Compositions and Selecting Sampling Practices and Quantitative Analysis Methods for Metals and Alloys |
| ASTM E 1283-1989 |
計算機綜合制造系統的采購 |
Procurement of Computer-Integrated Manufacturing Systems |
| ASTM E 1284-1997 |
新生物醫學術語結構用疾病分類標準和導則 |
Nosologic Standards and Guides for Construction of New Biomedical Nomenclature |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com