標準號 |
中文名稱 |
英文名稱 |
| ASTM B 476-1990 |
鍛制貴金屬電接觸材料 |
Wrought Precious Metal Electrical Contact Materials |
| ASTM B 477-1997 |
金銀鎳電觸點合金 |
Gold-Silver-Nickel Electrical Contact Alloy |
| ASTM B 478-1985 |
恒溫雙金屬橫向彎曲率的測試方法 |
Test Method for Cross Curvature of Thermostat Metals |
| ASTM B 479-2000 |
與食品接觸的和其它用途的撓性包裝材料用退火鋁及鋁合金箔標準規范 |
Standard Specification for Annealed Aluminum and Aluminum-Alloy Foil for Flexible Barrier, Food Contact, and Other Applications |
| ASTM B 48-2000 |
電導體用矩形和正方形軟裸銅線的標準規范 |
Standard Specification for Soft Rectangular and Square Bare Copper Wire for Electrical Conductors |
| ASTM B 480-1988 |
電鍍用鎂和鎂合金的制備 |
Preparation of Magnesium and Magnesium Alloys for Electroplating |
| ASTM B 481-1968 |
電鍍用鈦和鈦合金的制備 |
Preparation of Titanium and Titanium Alloys for Electroplating |
| ASTM B 482-1985 |
電鍍用鎢和鎢合金的制備 |
Preparation of Tungsten and Tungsten Alloys for Electroplating |
| ASTM B 483-1995 |
普通拉制鋁及鋁合金管 |
Aluminum and Aluminum-Alloy Drawn Tubes for General Purpose Applications |
| ASTM B 483/B 483M-2000 |
通用鋁和鋁合金拉制管的標準規范 |
Standard Specification for Aluminum and Aluminum-Alloy Drawn Tubes for General Purpose Applications |
| ASTM B 483M-1995 |
普通拉制鋁和鋁合金管 |
Aluminum and Aluminum-Alloy Drawn Tubes for General-Purpose Applications (Metric) |
| ASTM B 487-1985 |
用橫斷面顯微觀察法測定金屬及氧化層厚度的方法 |
Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of a Cross Section |
| ASTM B 488-2001 |
工程用電解沉積鍍金層標準規范 |
Standard Specification for Electrodeposited Coatings of Gold for Engineering Uses |
| ASTM B 489-1985 |
金屬表面電解沉積和自動催化沉積金屬鍍層延展性的彎曲試驗 |
Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited Metal Coatings on Metals |
| ASTM B 49-1998 |
電氣用再拉延的銅條材 |
Copper Redraw Rod for Electrical Purposes |
| ASTM B 490-1992 |
用測微計彎曲試驗法測定電解沉積物的延展性 |
Micrometer Bend Test for Ductility of Electrodeposits |
| ASTM B 491/B 491M-2000 |
通用鋁和鋁合金擠制圓管的標準規范 |
Standard Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-Purpose Applications |
| ASTM B 493-1983 |
鋯及鋯合金鍛件 |
Zirconium and Zirconium Alloy Forgings |
| ASTM B 494-1993 |
原生鋯 |
Primary Zirconium |
| ASTM B 495-1990 |
鋯及鋯合金鑄錠 |
Zirconium and Zirconium Alloy Ingots |
| ASTM B 496-2001 |
緊密的圓形同心絞捻銅導線標準規范 |
Standard Specification for Compact Round Concentric-Lay-Stranded Copper Conductors |
| ASTM B 497-1995 |
閉合跳火觸點上電壓降的測量 |
Measuring Voltage Drop on Closed Arcing Contacts |
| ASTM B 498-1993 |
鋼芯加強的鋁導線用鍍鋅鋼芯線(ACSR) |
Zinc-Coated (Galvanized) Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR) |
| ASTM B 498/B 498M-1998 |
鋼芯加強的鋁導線(ACSR)用鍍鋅鋼芯線 |
Zinc-Coated (Galvanized) Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR) |
| ASTM B 498M-1993 |
鋼芯加強的鋁導線用鍍鋅鋼芯線(ACSR)(米制) |
Zinc-Coated (Galvanized) Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR) (Metric) |
| ASTM B 499-1996 |
用磁性法測量磁性基底金屬的非磁性鍍層厚度的方法 |
Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals |
| ASTM B 5-2000 |
高電導率韌煉銅精煉型材標準規范 |
Standard Specification for High Conductivity Tough-Pitch Copper Refinery Shapes |
| ASTM B 500-1997 |
鋼芯加強的鋁導線用鍍金屬層的鋼芯線(ACSR) |
Metallic Coated Stranded Steel Core for Aluminum Conductors, Steel Reinforced (ACSR) |
| ASTM B 500/B 500M-1998 |
鋼芯加強鋁導線(ACSR)用金屬涂覆絞合鋼芯線 |
Metallic Coated Stranded Steel Core for Aluminum Conductors, Steel Reinforced (ACSR) |
| ASTM B 501-1999 |
電子設施用鍍銀包銅鋼絲 |
Silver-Coated, Copper-Clad Steel Wire for Electronic Application |
| ASTM B 502-1998 |
包鋁鋼芯加強鋁導線用包鋁鋼芯線 |
Aluminum-Clad Steel Core Wire for Aluminum Conductors, Aluminum-Clad Steel Reinforced |
| ASTM B 504-1990 |
用庫侖法測量金屬鍍層厚度的試驗方法 |
Test Method for Measurement of Thickness of Metallic Coatings by the Coulometric Method |
| ASTM B 505-1996 |
連續澆鑄的銅基合金鑄件 |
Copper-Base Alloy Continuous Castings |
| ASTM B 507-1986 |
機件在支架上電鍍的設計 |
Design of Articles to be Electroplated on Racks |
| ASTM B 508-1997 |
撓性金屬軟管用銅合金帶材標準規范 |
Standard Specification for Copper Alloy Strip for Flexible Metal Hose |
| ASTM B 511-2001 |
鎳鐵鉻硅合金棒和型材標準規范 |
Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Bars and Shapes |
| ASTM B 512-1999 |
鎳鉻硅合金坯料和棒材 |
Nickel-Chromium-Silicon Alloy Billets and Bars |
| ASTM B 514-1995 |
焊接的鎳鐵鉻合金管 |
Welded Nickel-Iron-Chromium Alloy Pipe |
| ASTM B 515-1995 |
焊接的UNS NO8800和UNS NO8810合金管 |
Welded UNS N08800 and UNS N08810 Alloy Tubes |
| ASTM B 516-1998 |
焊接鎳鉻鐵合金(UNS N06603、UNS N06025和UNS N06045)管的標準規范 |
Standard Specification for Welded Nickel-Chromium-Iron Alloy (UNS N06600, UNS N06603, UNS N06025, and UNS N06045 Tubes) |
| ASTM B 517-1998 |
焊接的鎳鉻鐵合金管 |
Welded Nickel-Chromium-Iron-Alloy Pipe |
| ASTM B 520-1993 |
電氣用鍍鋅包銅鋼絲 |
Tin-Coated, Copper-Clad Steel Wire for Electronic Application |
| ASTM B 521-1998 |
鉭和鉭合金無縫和焊接管 |
Tantalum and Tantalum Alloy Seamless and Welded Tubes |
| ASTM B 522-2001 |
金銀鉑電接觸合金標準規范 |
Standard Specification for Gold-Silver-Platinum Electrical Contact Alloy |
| ASTM B 523-1997 |
無縫和焊接鋯及鋯合金管標準規范 |
Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Tubes |
| ASTM B 523/B 523M-2001 |
無縫和焊接鋯及鋯合金管標準規范 |
Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Tubes |
| ASTM B 524-1992 |
鋁合金芯增強的同心絞捻鋁導線(ACAR,1380/6201) |
Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Alloy Reinforced (ACAR, 1350/6201) |
| ASTM B 524/B 524M-1999 |
鋁合金芯加強的同心絞捻鋁導線 |
Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Alloy Reinforced (ACAR, 1350/6201) |
| ASTM B 524M-1992 |
鋁合金加強的同心絞捻的鋁導線(ACAR,1350/6201)(米制) |
Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Alloy Reinforced (ACAR, 1350/6201) (Metric) |
| ASTM B 527-1993 |
用塔普-帕克(Tap-Pak)容量計測定耐火金屬及化合物粉末的塔普(Tap)密度的試驗方法 |
Test Method for Tap Density of Powders of Refractory Metals and Compounds by Tap-Pak Volumeter |
| ASTM B 528-1999 |
金屬粉末樣品橫向斷裂強度的標準試驗方法 |
Standard Test Method for Transverse Rupture Strength of Metal Powder Specimens |
| ASTM B 530-1996 |
用磁性法測量磁性和非磁性基底上的電解沉積鍍鎳層厚度的方法 |
Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Electrodeposited Nickel Coatings on Magnetic and Nonmagnetic Substrates |
| ASTM B 531-1990 |
電氣用5005型拉制鋁合金條 |
Aluminum-Alloy 5005 Drawing Stock for Electrical Purposes |
| ASTM B 532-1985 |
電鍍塑料表面外觀 |
Appearance of Electroplated Plastic Surfaces |
| ASTM B 533-1985 |
鍍金屬塑料抗撕裂強度的試驗方法 |
Test Method for Peel Strength of Metal Electroplated Plastics |
| ASTM B 534-1996 |
銅鈷鈹合金及銅鎳鈹合金板、薄板、帶材和軋制棒材 |
Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Plate, Sheet, Strip and Rolled Bar |
| ASTM B 535-1999 |
鎳鐵鉻硅合金無縫管 |
Nickel-Iron-Chromium-Silicon Alloy Seamless Pipe |
| ASTM B 536-1995 |
鎳鐵鉻硅合金板、薄板及帶材 |
Nickel-Iron-Chromium-Silicon Alloys Plate, Sheet and Strip |
| ASTM B 537-1970 |
大氣暴露下電鍍面板評定規程 |
Rating of Electroplated Panels Subjected to Atmospheric Exposure |
| ASTM B 539-1996 |
電氣連接的接觸電阻的測量方法(靜態接觸) |
Test Methods for Measuring Contact Resistance of Electrical Connections (Static Contacts) |
| ASTM B 540-1997 |
電觸點用鈀合金 |
Palladium Electrical Contact Alloy |
| ASTM B 541-2001 |
電接觸用金合金標準規范 |
Standard Specification for Gold Electrical Contact Alloy |
| ASTM B 542-1999 |
電觸點及其使用的相關術語 |
Terminology Relating to Electrical Contacts and Their Use |
| ASTM B 543-1996 |
焊接的銅及銅合金熱交換管 |
Welded Copper and Copper-Alloy Heat Exchanger Tube |
| ASTM B 543M-1991 |
焊接的銅及銅合金熱交換管(米制) |
Welded Copper and Copper-Alloy Heat Exchanger Tube (Metric) |
| ASTM B 545-1997 |
錫電解沉積層 |
Electrodeposited Coatings of Tin |
| ASTM B 546-1998 |
電熔焊接鎳鐵鉻硅合金管 |
Electric Fusion-Welded Ni-Fe-Cr-Si Alloy Pipe |
| ASTM B 547/B 547M-2000 |
成形的與電弧焊接鋁及鋁合金圓管標準規范 |
Standard Specification for Aluminum and Aluminum-Alloy Formed and Arc-Welded Round Tube |
| ASTM B 548-1990 |
壓力容器用鋁合金板的超聲波檢驗 |
Ultrasonic Inspection of Aluminum-Alloy Plate for Pressure Vessels |
| ASTM B 549-2000 |
包鋁鋼芯加強的同心絞捻鋁導線(ACSR/AW)標準規范 |
Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Clad Steel Reinforced (ACSR/AW) |
| ASTM B 550-1997 |
鋯及鋯合金棒和線標準規范 |
Standard Specification for Zirconium and Zirconium Alloy Bar and Wire |
| ASTM B 550/B 550M-2001 |
鋯及鋯合金棒材和線材標準規范 |
Standard Specification for Zirconium and Zirconium Alloy Bar and Wire |
| ASTM B 551-1997 |
鋯及鋯合金板、薄板及帶材標準規范 |
Standard Specification for Zirconium and Zirconium Alloy Strip, Sheet, and Plate |
| ASTM B 551/B 551M-2001 |
鋯及鋯合金帶材、薄板和中厚板標準規范 |
Standard Specification for Zirconium and Zirconium Alloy Strip, Sheet, and Plate |
| ASTM B 552-1998 |
水淡化廠用無縫和焊接銅/鎳管 |
Seamless and Welded Copper/Nickel Tubes for Water Desalting Plants |
| ASTM B 555-1986 |
用滴定試驗法測量電解沉積金屬鍍層厚度 |
Measurement of Electrodeposited Metallic Coating Thicknesses by the Dropping Test |
| ASTM B 556-1990 |
用點滴試驗法測量薄鍍鉻層厚度 |
Measurement of Thin Chromium Coatings by the Spot Test |
| ASTM B 557-1994 |
鍛造和鑄造的鋁及鎂合金制品的抗拉試驗 |
Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products |
| ASTM B 557M-1994 |
鍛造及鑄造鋁和鎂合金產品的拉力試驗(米制) |
Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products (Metric) |
| ASTM B 558-1979 |
電鍍用鎳合金的制備 |
Preparation of Nickel Alloys for Electroplating |
| ASTM B 559-1993 |
電氣用鍍鎳包銅鋼絲 |
Nickel-Coated, Copper-Clad Steel Wire for Electronic Application |
| ASTM B 560-1994 |
新錫鉛合金 |
Modern Pewter Alloys |
| ASTM B 561-1994 |
精煉鉑 |
Refined Platinum |
| ASTM B 562-1995 |
精煉金 |
Refined Gold |
| ASTM B 563-1995 |
電接觸用鈀銀銅合金 |
Palladium-Silver-Copper Electrical Contact Alloy |
| ASTM B 564-2000 |
鎳合金鍛件標準規范 |
Standard Specification for Nickel Alloy Forgings |
| ASTM B 565-1994 |
鋁和鋁合金鉚釘及冷鐓頭絲與桿的剪切試驗 |
Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and Rods |
| ASTM B 566-1993 |
包銅鋁絲 |
Copper-Clad Aluminum Wire |
| ASTM B 567-1998 |
用β射線反向散射法測量覆層厚度的試驗方法 |
Test Method for Measurement of Coating Thickness by the Beta Backscatter Method |
| ASTM B 568-1998 |
用X射線光度法測量覆層厚度的試驗方法 |
Test Method for Measurement of Coating Thickness by X-Ray Spectrometry |
| ASTM B 569-1998 |
熱交換器管用窄而薄的UNS No. C26000黃銅帶材 |
UNS No. C26000 Brass Strip in Narrow Widths and Light Gage for Heat-Exchanger Tubing |
| ASTM B 570-1996 |
銅鈹合金鍛件和擠壓件 |
Copper-Beryllium Alloy Forgings and Extrusions |
| ASTM B 571-1997 |
金屬覆層粘附性的試驗方法 |
Test Methods for Adhesion of Metallic Coatings |
| ASTM B 572-1998 |
UNS NO6002、UNS NO6230和UNS R30556棒 |
UNS N06002, UNS N06230 and UNS R30556 Rod |
| ASTM B 573-2000 |
鎳鉬鉻鐵合金(UNS N10003和UNS N10242)棒材標準規范 |
Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloy (UNS N10003, N10242)* Rod |
| ASTM B 574-1999 |
低碳鎳鉬鉻和低碳鎳鉻鉬合金桿 |
Low-Carbon Nickel-Molybdenum-Chromium and Low-Carbon Nickel-Chromium-Molybdenum Alloy Rod |
| ASTM B 575-1999 |
低碳鎳鉬鉻和低碳鎳鉻鉬合金板、薄板和帶材 |
Low-Carbon Nickel-Molybdenum-Chromium and Low-Carbon Nickel-Chromium-Molybdenum Alloy Plate, Sheet and Strip |
| ASTM B 576-1994 |
電接觸材料的電弧侵蝕試驗 |
Arc Erosion Testing of Electrical Contact Materials |
| ASTM B 577-1993 |
銅的氫脆試驗方法 |
Test Methods for Hydrogen Embrittlement of Copper |
| ASTM B 578-1987 |
電鍍層顯微硬度的測量方法 |
Test Method for Microhardness of Electroplated Coatings |
| ASTM B 579-1973 |
錫鉛合金的電解沉積鍍層(焊接板) |
Electrodeposited Coatings of Tin-Lead Alloy (Solder Plate) |
| ASTM B 580-1979 |
鋁陽極氧化鍍層 |
Anodic Oxide Coatings on Aluminum |
| ASTM B 581-1997 |
鎳鉻鐵鉬銅合金棒 |
Nickel-Chromium-Iron-Molybdenum-Copper Alloy Rod |
| ASTM B 582-1997 |
鎳鉻鐵鉬銅合金板、薄板及帶材 |
Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet and Strip |
| ASTM B 584-2000 |
通用銅合金砂型鑄件標準規范 |
Standard Specification for Copper Alloy Sand Castings for General Applications |
| ASTM B 587-1997 |
焊接黃銅管 |
Welded Brass Tube |
| ASTM B 588-1988 |
用雙束干涉顯微技術測量透明涂層或不透明涂層厚度的試驗方法 |
Test Method for Measurement of Thickness of Transparent or Opaque Coatings by Double-Beam-Interference Microscope Technique |
| ASTM B 589-1994 |
精煉鈀 |
Refined Palladium |
| ASTM B 591-1998 |
銅鋅錫合金板、薄板、帶材及軋制的型材 |
Copper-Zinc-Tin Alloys Plate, Sheet, Strip and Rolled Bar |
| ASTM B 592-2001 |
銅鋅鋁鈷合金、銅鋅錫鐵板、薄板、帶材及軋制的棒材標準規范 |
Standard Specification for Copper-Zinc-aluminum-Cobalt Alloy, Copper-Zinc-Tin-Iron Alloy Plate, Sheet, Strip, and Rolled Bar |
| ASTM B 593-1996 |
銅合金彈簧材料的彎曲疲勞試驗 |
Bending Fatigue Testing for Copper-Alloy Spring Materials |
| ASTM B 594-1997 |
航空設備用鋁合金鍛制品的超聲波檢驗 |
Ultrasonic Inspection of Aluminum-Alloy Wrought Products for Aerospace Applications |
| ASTM B 595-1995 |
鋁粉末燒結結構部件標準規范 |
Standard Specification for Sintered Aluminum Structurals |
| ASTM B 596-1989 |
金銅合金電接觸材料 |
Gold-Copper Alloy Electrical Contact Material |
| ASTM B 597-1992 |
鋁合金的熱處理 |
Heat Treatment of Aluminum Alloys |
| ASTM B 598-1998 |
抗拉試驗中銅合金偏置屈服強度的測定 |
Determining Offset Yield Strength in Tension for Copper Alloys |
| ASTM B 599-1992 |
穩定的鎳鐵鉻鉬鈳合金板、薄板及帶材 |
Nickel-Iron-Chromium -Molybdenum-Columbium Stabilized Alloy Plate, Sheet and Strip |
| ASTM B 6-1998 |
鋅 |
Zinc |
| ASTM B 600-1991 |
鈦及鈦合金表面的去垢和清洗 |
Descaling and Cleaning Titanium and Titanium Alloy Surfaces |
| ASTM B 601-2001 |
鍛造及鑄造的銅和銅合金回火名稱與符號的標準分類 |
Standard Classification for Temper Designations for Copper and Copper Alloys-Wrought and Cast |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com