標準號 |
中文名稱 |
英文名稱 |
| ASME A 112.18.1-2000 |
衛生設備配件 |
Plumbing fixture fittings |
| ASME A 112.18.1M Errata-1994 |
管道固定配件.勘誤表 |
Plumbing fixture fittings; Errata |
| ASME A 112.18.1M-1996 |
管道固定配件 |
Plumbing fixture fittings |
| ASME A 112.18.3M-1996 |
管道固定配件逆流保護裝置和系統的性能要求 |
Performance requirements for backflow protection devices and systems in plumping fixture fittings |
| ASME A 112.18.7-1999 |
裝蓋板的帶整體回流保護的浴室/淋浴轉換閥 |
Deck mounted bath/shower transfer valves with integral backflow protection |
| ASME A 112.19.12-2000 |
墻壁固定和基座式固定的,可調節和旋轉的盥洗池和洗池承載系統 |
Wall mounted and pedestal mounted, adjustable and pivoting lavatory and sink carriers systems |
| ASME A 112.19.1M Supplement 1-1998 |
搪瓷鑄鐵衛生設備.補充件1 |
Enameled cast iron plumbing fixtures; Supplement 1 |
| ASME A 112.19.1M Supplement 2-2000 |
搪瓷鑄鐵管道固定件.補充件2 |
Enameled cast iron plumbing fixtures - Supplement 2 |
| ASME A 112.19.1M-1994 |
搪瓷鑄鐵管道固定件 |
Enameled cast iron plumbing fixtures |
| ASME A 112.19.3M-1987 |
不銹鋼管道設備(為住宅設計) |
Stainless steel plumbing fixtures (designed for residential use) |
| ASME A 112.19.4M Supplement 1-1998 |
搪瓷鑄鋼衛生設備.補充件1 |
Porcelain enameled formed steel plumbing fixtures; Supplement 1 |
| ASME A 112.19.4M Supplement 2-2000 |
搪瓷鑄鋼管道固定件.補充件2 |
Porcelain enameled formed steel plumbing fixtures - Supplement 2 |
| ASME A 112.19.4M-1994 |
搪瓷鑄鋼管道固定件 |
Porcelain enameled formed steel plumbing fixtures |
| ASME A 112.19.5-1979 |
廁所便盆,水箱和小便池的修整 |
Trim for water-closet bowls, tanks, and urinals |
| ASME A 112.19.7M-1995 |
旋渦式浴缸設備 |
Whirlpool bathtub appliances |
| ASME A 112.19.8M-1987 |
游泳池,淺水池,溫水泳池,保溫浴盆和渦流式浴缸用吸水配件 |
Suction fittings for use in swimming pools, wading pools, spas, hot tubs, and whirlpool bathtub appliances |
| ASME A 112.19.9M-1991 |
未上釉陶瓷管道緊固件 |
Non-vitreous ceramic plumbing fixtures |
| ASME A 112.21.1M-1991 |
地面排水溝 |
Floor drains |
| ASME A 112.21.2M-1983 |
屋面排水 |
Roof drains |
| ASME A 112.21.3M-1985 |
公用和維修保養用給水栓 |
Hydrants for utility and maintenance use |
| ASME A 112.3.1-1993 |
在地上/地下,衛生、暴雨和化工用不銹鋼排水系統的安裝程序和性能標準 |
Performance standard and installation procedures for stainless steel drainage systems for sanitary, storm, and chemical applications, above and below ground |
| ASME A 112.3.4-2000 |
浸漬盥洗室系統和相關件 |
Macerating toilet systems and related components |
| ASME A 112.36.2M-1991 |
灰箱 |
Cleanouts |
| ASME A 112.6.1M-1988 |
公用懸空管道設備的支架 |
Supports for off-the-floor plumbing fixtures for public use |
| ASME A 112.6.2-2000 |
帶暗箱的離地抽水馬桶的結構附屬支撐物 |
Framing-affixed supports for off-the-floor water closets with concealed tanks |
| ASME A 120.1-1996 |
建筑物維修用電動升降平臺的安全要求 |
Safety requirements for powered platforms for building maintenance |
| ASME A 13.1-1981 |
管道系統識別方案 |
Scheme for the identification of piping systems |
| ASME A 17 Checklist 1-1993 |
電梯檢驗的檢查表 |
Checklist for inspection of electric elevators |
| ASME A 17 Checklist 2-1989 |
升降機使用結構的測試和檢驗用的檢查表 |
Checklist for inspection and test of elevators used for construction |
| ASME A 17 Checklist 3-1991 |
液壓升降機試驗檢驗檢查表(除保安器和配重外的直接柱塞) |
Checklist for inspection and test of hydraulic elevators (for direct plunger without safeties or counterweights) |
| ASME A 17 Checklist 4-1989 |
自動電梯的試驗檢驗檢查表 |
Checklist for inspection and test of escalators |
| ASME A 17 Checklist 5-1985 |
自動走道試驗檢驗檢查表 |
Checklist for inspection and test of moving walks |
| ASME A 17 Interpretations 2-13-1989 |
升降機和自動電梯委員會1979年6月至1989年5月間關于2-13節的說明 |
Interpretations Nos. 2-13: A17 Elevator and escalator committee June 1979 - May 1989 |
| ASME A 17 Interpretations-1979 |
A17文件(1972-1797)的說明 |
Interpretations: A17 Documents 1972-1979 |
| ASME A 17.1 Handbook-1993 |
升降機和自動電梯的安全代碼.手冊 |
Handbook: Safety code for elevators and escalators |
| ASME A 17.1 Interpretations 17-1993 |
17號說明(1992年6月-1993年5月):升降機和自動電梯 |
Interpretations No. 17 (June 1992 - May 1993): Elevators and escalators |
| ASME A 17.1 Interpretations 18-1994 |
18號說明.升降機和自動電梯 |
Interpretations No. 18: Elevators and escalators |
| ASME A 17.1-2000 |
升降機和自動扶梯的安全規范 |
Safety code for elevators and escalators |
| ASME A 17.1a Addenda-1994 |
升降機和自動電梯的安全代碼.附錄 |
Safety code for elevators and escalators; Addenda |
| ASME A 17.1a Errata-1995 |
升降機和自動電梯的安全準則.勘誤表 |
Safety code for elevators and escalators; Errata |
| ASME A 17.1b Addenda-2003 |
提升機和自動電梯安全規范.補充件 |
(Safety code for elevators and escalators; Addenda) |
| ASME A 17.1b Addenda-2003 |
提升機和自動電梯安全規范.補充件 |
|
| ASME A 17.2.1-1993 |
電動升降機檢驗員手冊(包括電動牽引和卷筒升降機的檢驗程序) |
Inspectors manual for electric elevators (includes inspection procedures for electric traction and winding drum elevators) |
| ASME A 17.2.1a Addenda-1997 |
電動升降機檢驗員手冊.附錄 |
Inspectors manual for electric elevators; Addenda |
| ASME A 17.2.1b Addenda-1998 |
電動升降機檢驗員手冊.附錄 |
Inspectors manual for electric elevators; Addenda |
| ASME A 17.2.2-1997 |
液壓升降機的檢驗員手冊(包括液壓升降機的檢驗程序) |
Inspectors manual for hydraulic elevators (includes inspection procedures for hydraulic elevators) |
| ASME A 17.2.2a Addenda-1998 |
液壓升降機的檢驗員手冊.附錄 |
Inspectors manual for hydraulic elevators; Addenda |
| ASME A 17.2.2b Addenda-1996 |
液壓升降機的檢驗員手冊.補充件 |
Inspectors manual for hydraulic elevators; Addenda |
| ASME A 17.2.3-1998 |
升降機和自動過道的檢驗員手冊 |
Inspectors manual for escalators and moving walks |
| ASME A 17.2.3a Addenda-2000 |
升降機和自動過道的檢驗員手冊.附錄 |
Inspectors manual for escalators and moving walks; Addenda |
| ASME A 17.2.3b Addenda-1997 |
自動電梯和移動梯的檢驗手冊.補充件 |
Inspectors manual for escalators and moving walks; Addenda |
| ASME A 17.2a Addenda-1989 |
升降機和自動電梯檢驗員手冊.附錄 |
Inspectors manual for elevators and escalators; Addenda |
| ASME A 17.2b Addenda-1990 |
升降機和自動電梯檢驗員手冊.附錄 |
Inspectors manual for elevators and escalators; Addenda |
| ASME A 17.3 Interpretations 2-1994 |
2號說明.現行升降機和自動電梯的安全代碼 |
Interpretations No 2: Safety code for existing elevators and escalators |
| ASME A 17.3-1993 |
現行升降機和自動電梯包括電子和液壓升降機和自動電梯要求的安全規程 |
Safety code for existing elevators and escalators includes requirements for electric and hydraulic elevators and escalators |
| ASME A 17.3a Addenda-1994 |
升降機和自動電梯(包括電子和液壓升降機的要求)現行安全代碼.附錄 |
Safety code for existing elevators and escalators (includes requirements for electric and hydraulic elevators and escalators); Addenda |
| ASME A 17.4-1991 |
電梯中突發情況下乘客疏散的導則 |
Guide for emergency evacuation of passengers from elevators |
| ASME A 17.5-1996 |
升降機和自動電梯的電器設備 |
Elevator and escalator electrical equipment |
| ASME A 39.1 Interpretations-1993 |
窗戶清洗的安全要求.說明 |
Interpretations: Safety requirements for window cleaning |
| ASME A 39.1-1995 |
窗戶清洗的安全要求 |
Safety requirements for window cleaning |
| ASME A 39.1b Addenda-1997 |
窗戶清洗的安全要求.附錄 |
Safety requirements for window cleaning; Addenda |
| ASME A 90.1-1997 |
皮帶式載人升降機的安全標準 |
Safety standard for belt manlifts |
| ASME A 90.1a Addenda-1999 |
皮帶式載人升降機的安全標準 |
Safety standard for belt manlifts |
| ASME A112.1.2-1991 |
管道系統中的空氣間架 |
(Air gaps in plumbing systems) |
| ASME A112.1.2-2004 |
管道系統中的氣隙(用于衛生設備和水連接感受器) |
|
| ASME A112.1.3-2000 |
與衛生設備、器具和附件一起使用的空隙配件 |
(Air gap fittings for use with plumbing fixtures, appliances, and appurtenances) |
| ASME A112.14.1-1975 |
回水閥門 |
(Backwater valves) |
| ASME A112.14.1-2003 |
回水閥門 |
|
| ASME A112.14.4-2001 |
油脂清除裝置 |
(Grease removal devices) |
| ASME A112.18.1-2003 |
衛生設備配件 |
(Plumbing fixture fittings) |
| ASME A112.18.1-2003 |
衛生設備配件 |
|
| ASME A112.18.1-2003 |
衛生設備配件 |
|
| ASME A112.18.1-2003 |
衛生設備配件 |
|
| ASME A112.18.1-2005 |
衛生設備配件 |
|
| ASME A112.18.2-2005 |
排污用衛生設備配件 |
|
| ASME A112.18.3-2002 |
衛生設備配件中防逆流裝置和系統的性能要求 |
(Performance requirements for backflow protection devices and systems in plumbing fixture fittings) |
| ASME A112.18.6-2003 |
柔性水連接器 |
|
| ASME A112.18.7-1999 |
裝蓋板的帶整體回流保護的浴室/淋浴轉換閥 |
(Deck mounted bath/shower transfer valves with integral backflow protection) |
| ASME A112.19.10-2003 |
抽水馬桶雙沖裝置 |
|
| ASME A112.19.12-2000 |
墻壁固定和基座式固定的,可調節和旋轉的盥洗池和洗池承載系統 |
(Wall mounted and pedestal mounted, adjustable and pivoting lavatory and sink carriers systems) |
| ASME A112.19.13-2001 |
電動液壓抽水馬桶 |
(Electrohydraulic water closets) |
| ASME A112.19.15-2005 |
帶壓力密封門的浴缸/旋渦池浴缸 |
|
| ASME A112.19.17-2002 |
住宅和商用游泳池、健康中心、熱浴盆和淺水池吸入系統用人造安全真空排放系統 |
(Manufactured safety vacuum release systems (SVRS) for residential and commercial swimming pools, spa, hot tub, and wading pool suction systems) |
| ASME A112.19.1M Supplement 1-1 |
搪瓷鑄鐵衛生設備.補充件1 |
(Enameled cast iron plumbing fixtures; Supplement 1) |
| ASME A112.19.1M Supplement 2-2 |
搪瓷鑄鐵管道固定件.補充件2 |
(Enameled cast iron plumbing fixtures - Supplement 2) |
| ASME A112.19.1M-1994 |
搪瓷鑄鐵管道固定件 |
(Enameled cast iron plumbing fixtures) |
| ASME A112.19.2-2003 |
抽水馬桶和小便池用瓷質衛生器具和液壓要求 |
|
| ASME A112.19.2M Supplement 1-2 |
瓷質衛生設備.補充件1 |
(Vitreous China plumbing fixtures; Supplement 1) |
| ASME A112.19.2M-1998 |
瓷質衛生設備 |
(Vitreous China plumbing fixtures) |
| ASME A112.19.3 Supplement 1-20 |
不銹鋼衛生設備(為住宅使用設計).補充件1 |
(Stainless steel plumbing fixtures (designed for residential use); Supplement 1) |
| ASME A112.19.4M Supplement 1-1 |
搪瓷鑄鋼衛生設備.補充件1 |
(Porcelain enameled formed steel plumbing fixtures; Supplement 1) |
| ASME A112.19.4M Supplement 2-2 |
搪瓷鑄鋼管道固定件.補充件2 |
(Porcelain enameled formed steel plumbing fixtures - Supplement 2) |
| ASME A112.19.4M-1994 |
搪瓷鑄鋼管道固定件 |
(Porcelain enameled formed steel plumbing fixtures) |
| ASME A112.19.5-1999 |
抽水馬桶盆部、水箱和小便池的修整 |
(Trim for water-closet bowls, tanks, and urinals) |
| ASME A112.19.6-1995 |
沖水廁所和小便池的水力性能要求 |
(Hydraulic performance requirements for water closets and urinals) |
| ASME A112.19.7M-1995 |
旋渦式浴缸設備 |
(Whirlpool bathtub appliances) |
| ASME A112.19.8M-1987 |
游泳池,淺水池,溫水泳池,保溫浴盆和渦流式浴缸用吸水配件 |
(Suction fittings for use in swimming pools, wading pools, spas, hot tubs, and whirlpool bathtub appliances) |
| ASME A112.19.9M Supplement 1-2 |
未上釉陶瓷衛生設備.補充件1 |
(Non-vitreous ceramic plumbing fixtures; Supplement 1) |
| ASME A112.19.9M-1991 |
未上釉陶瓷管道緊固件 |
(Non-vitreous ceramic plumbing fixtures) |
| ASME A112.20.1-2004 |
高純度管道系統的安裝人員的資格證明 |
|
| ASME A112.20.2-2004 |
管道系統用滅火系統和裝置的安裝者的資格證明 |
|
| ASME A112.21.2M-1983 |
屋面排水 |
(Roof drains) |
| ASME A112.21.3M-1985 |
公用和維修保養用給水栓 |
(Hydrants for utility and maintenance use) |
| ASME A112.3.1-1993 |
在地上/地下,衛生、暴雨和化工用不銹鋼排水系統的安裝程序和性能標準 |
(Performance standard and installation procedures for stainless steel drainage systems for sanitary, storm, and chemical applications, above and below ground) |
| ASME A112.3.4-2000 |
浸漬盥洗室系統和相關件 |
(Macerating toilet systems and related components) |
| ASME A112.36.2M-1991 |
灰箱 |
(Cleanouts) |
| ASME A112.4.1-1993 |
熱水器減壓閥排水管 |
(Water heater relief valve drain tubes) |
| ASME A112.4.2-2003 |
抽水馬桶個人衛生裝置 |
|
| ASME A112.6.1M-1997 |
公用懸空衛生設備用地板固定的支架 |
(Floor-affixed supports for off-the-floor plumbing fixtures for public use) |
| ASME A112.6.3-2001 |
地面排水管和排水溝 |
(Floor and trench drains) |
| ASME A112.6.4-2003 |
屋頂、樓板和陽臺排水管 |
|
| ASME A112.6.9-2005 |
虹吸式屋頂排水管 |
|
| ASME A112.9.2-2003 |
瓷質衛生設備以及抽水馬桶和小便池的液壓要求 |
|
| ASME A120.1-2001 |
建筑物維修用電動升降平臺的安全要求 |
(Safety requirements for powered platforms for building maintenance) |
| ASME A13.1-1996 |
管道系統識別方案 |
(Scheme for the identification of piping systems) |
| ASME A17 Checklist 1-1993 |
電梯檢驗的檢查表 |
(Checklist for inspection of electric elevators) |
| ASME A17 Checklist 2-1989 |
升降機使用結構的測試和檢驗用的檢查表 |
(Checklist for inspection and test of elevators used for construction) |
| ASME A17 Checklist 3-1991 |
液壓升降機試驗檢驗檢查表(除保安器和配重外的直接柱塞) |
(Checklist for inspection and test of hydraulic elevators (for direct plunger without safeties or counterweights)) |
| ASME A17 Checklist 4-1989 |
自動電梯的試驗檢驗檢查表 |
(Checklist for inspection and test of escalators) |
| ASME A17 Checklist 5-1985 |
自動走道試驗檢驗檢查表 |
(Checklist for inspection and test of moving walks) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com