標準號 |
中文名稱 |
英文名稱 |
| ASME B16.12-1998 |
鑄鐵螺紋排水管件 |
(Cast iron threaded drainage fittings) |
| ASME B16.14-1991 |
帶有管螺紋的鐵管塞、管套、鎖緊螺母 |
(Ferrous pipe plugs, bushings, and locknuts with pipe threads) |
| ASME B16.15-1985 |
鑄青銅螺紋管件 |
(Cast bronze threaded fittings) |
| ASME B16.18-2001 |
鑄銅合金軟釬焊連接壓力管件 |
(Cast copper alloy solder joint pressure fittings) |
| ASME B16.21-1992 |
管法蘭用非金屬平密封墊 |
(Nonmetallic flat gaskets for pipe flanges) |
| ASME B16.21-2005 |
管法蘭用非金屬平墊圈 |
|
| ASME B16.22-2001 |
鍛銅和銅合金釬焊壓力配件 |
(Wrought copper and copper alloy solder joint pressure fittings) |
| ASME B16.23 Errata-2003 |
鑄銅合金軟釬焊連接排水管件.DWV.勘誤 |
|
| ASME B16.23-2002 |
DWV類鑄銅合金釬焊連接排水管件 |
(Cast copper alloy solder joint drainage fittings: DWV) |
| ASME B16.24-2001 |
150、300、400、600、900、1500和2500 類鑄銅合金管法蘭和法蘭配件 |
(Cast copper alloy pipe flanges and flanged fittings: Classes 150, 300, 400, 600, 900, 1500, and 2500) |
| ASME B16.25-1997 |
對接焊端 |
(Buttwelding ends) |
| ASME B16.26-1988 |
青銅擴口管用鑄銅合金配件 |
(Cast copper alloy fittings for flared copper tubes) |
| ASME B16.28-1994 |
可鍛鋼對接焊弧形彎頭和回轉管 |
(Wrought steel buttwelding short radius elbows and returns) |
| ASME B16.29-2001 |
DWV類可鍛銅和可鍛銅合金釬焊連接排水管接頭 |
(Wrought copper and wrought copper alloy solder joint drainage fittings - DWV) |
| ASME B16.3-1998 |
可鍛鐵螺紋配件.等級150和300 |
(Malleable iron threaded fittings; Classes 150 and 300) |
| ASME B16.33-2002 |
125表壓及以下的氣體管道系統中使用的手動金屬氣閥 |
(Manually operated metallic gas valves for use in gas piping systems up to 125 psi (sizes NPS 1/2 through NPS 2)) |
| ASME B16.34-1996 |
閥門.法蘭、螺紋和焊接端 |
(Valves - Flanged, threaded, and welding end) |
| ASME B16.34-2004 |
帶凸緣、加螺紋和焊接端閥門 |
|
| ASME B16.34a Addenda-1998 |
帶螺紋的法蘭式閥門和焊接端.附錄 |
(Valves - Flanged, threaded, and welding end; Addenda) |
| ASME B16.36-1996 |
孔板法蘭 |
(Orifice flanges) |
| ASME B16.38-1985 |
氣體分配系統中用手動大型金屬閥門(NPS 2 1/2到12,其最大允許表壓不超過125巴) |
(Large metallic valves for gas distribution (manually operated, NPS 2 1/2 to 12, 125 psig maximum)) |
| ASME B16.39-1998 |
可鍛鐵螺紋管活接頭:等級150、250和300 |
(Malleable iron threaded pipe unions; Classes 150, 250, and 300) |
| ASME B16.4-1998 |
灰口鐵螺紋配件.等級150和300 |
(Gray iron threaded fittings; Classes 125 and 250) |
| ASME B16.40 Erratum-2003 |
氣體分配系統中手工操縱的熱塑性氣體關閉器和閥門.勘誤 |
|
| ASME B16.40-2002 |
氣體分配系統中的手動熱塑性氣體截流閥及閥門 |
(Manually operated thermoplastic gas shutoffs and valves in gas distribution systems) |
| ASME B16.42-1998 |
球墨鑄鐵管法蘭及法蘭配件.等級150和300 |
(Ductile iron pipe flanges and flanged fittings - Classes 150 and 300) |
| ASME B16.47-1996 |
NPS 26 - NPS 60的大直徑鋼法蘭 |
(Large diameter steel flanges - NPS 26 through NPS 60) |
| ASME B16.48-1997 |
鋼絲繩用坯件 |
(Steel line blanks) |
| ASME B16.49-2000 |
傳輸和分配系統用工廠預制鍛鋼對焊感應管彎頭 |
(Factory-made wrought steel buttwelding induction bends for transportation and distribution systems) |
| ASME B16.5-1996 |
管法蘭和法蘭管件.NPS 1/2 - NPS 24 |
(Pipe flanges and flanged fittings - NPS 1/2 through NPS 24) |
| ASME B16.5-2003 |
管法蘭和法蘭管件:NPS 1/2-24 |
|
| ASME B16.50-2001 |
鍛造銅及銅合金硬焊結合壓力配件 |
(Wrought copper and copper alloy braze-joint pressure fittings) |
| ASME B16.5a Addenda-1998 |
管法蘭和法蘭管件.NPS 1/2至NPS 24.附錄 |
(Pipe flanges and flanged fittings - NPS 1/2 through NPS 24; Addenda) |
| ASME B16.9-2001 |
工廠制鍛鋼對焊配件 |
(Factory-made wrought steel buttwelding fittings) |
| ASME B16.9-2003 |
工廠制鍛鋼對焊配件 |
|
| ASME B17.1-1967 |
鍵與鍵槽 |
(Keys and keyseats) |
| ASME B17.2-1967 |
月牙鍵與鍵槽 |
(Woodruff keys and keyseats) |
| ASME B18.1.1-1972 |
小型實心鉚釘 |
(Small solid rivets) |
| ASME B18.1.2-1972 |
大型鉚釘 |
(Large rivets) |
| ASME B18.1.3M Errata-1985 |
米制小型實心鉚釘正誤表 |
(Metric small solid rivets; Errata) |
| ASME B18.1.3M-1983 |
米制小型實心鉚釘 |
(Metric small solid rivets) |
| ASME B18.10-1982 |
道軌用螺栓和螺母 |
(Track bolts and nuts) |
| ASME B18.11-1961 |
小型螺釘 |
(Miniature screws) |
| ASME B18.12-2001 |
機械緊固件術語匯編 |
(Glossary of terms for mechanical fasteners) |
| ASME B18.13-1996 |
螺釘和洗衣機組件.臂板(英寸系列) |
(Screw and washer assemblies - Sems (Inch series)) |
| ASME B18.16.1M Errata-1979 |
有效力矩型米制鋼六角螺母和六角法蘭螺母機械和性能要求.勘誤表 |
(Mechanical and performance requirements for prevailing-torque type steel metric hex nuts and hex flange nuts; Errata) |
| ASME B18.16.1M-1979 |
有效力矩型米制鋼六角螺母和六角法蘭螺母的機械和性能要求 |
(Mechanical and performance requirements for prevailing-torque type steel metric hex nuts and hex flange nuts) |
| ASME B18.16.2M-1979 |
有效力矩型米制鋼六角螺母和六角法蘭螺母的轉矩應力試驗要求 |
(Torque-tension test requirements for prevailing-torque type steel metric hex nuts and hex flange nuts) |
| ASME B18.16.3M-1998 |
有效力矩型米制鋼六角螺母和六角法蘭螺母的尺寸要求 |
(Dimensional requirements for prevailing-torque type steel metric hex nuts and hex flange nuts) |
| ASME B18.18.1M-1987 |
通用緊固件的檢驗和質量保證 |
(Inspection and quality assurance for general purpose fasteners) |
| ASME B18.18.3M-1987 |
專用緊固件的檢驗和質量保證 |
(Inspection and quality assurance for special purpose fasteners) |
| ASME B18.18.4M-1987 |
高度專業化設計應用中緊固件的檢驗和質量保證 |
(Inspection and quality assurance for fasteners for highly specialized engineered applications) |
| ASME B18.2.1 Erratum-2003 |
方頭和六角頭螺栓和螺釘(英制系列).ASME B18.2.1-1996的勘誤 |
|
| ASME B18.2.1-1996 |
英制方頭和六角頭螺栓和螺釘(英制系列) |
(Square and hex bolts and screws (Inch series)) |
| ASME B18.2.1a Addenda-1999 |
方頭和六角頭螺栓和螺釘(英制系列).附錄 |
(Square and hex bolts and screws (inch series); Addenda) |
| ASME B18.2.2-1987 |
英制四角和六角形螺母 |
(Square and hex nuts (Inch series)) |
| ASME B18.2.3.1M-1999 |
米制六角頭螺釘 |
(Metric hex cap screws) |
| ASME B18.2.3.2M Errata-1980 |
米制成型六角頭螺釘,正誤表 |
(Metric formed hex screws; Errata) |
| ASME B18.2.3.2M-1979 |
米制成型六角頭螺釘 |
(Metric formed hex screws) |
| ASME B18.2.3.2M-2005 |
米制成型六角螺釘 |
|
| ASME B18.2.3.3M Errata-1981 |
米制重型六角頭螺釘,正誤表 |
(Metric heavy hex screws; Errata) |
| ASME B18.2.3.3M-1979 |
米制重型六角頭螺釘 |
(Metric heavy hex screws) |
| ASME B18.2.3.4M-2001 |
米制六角頭法蘭螺釘 |
(Metric hex flange screws) |
| ASME B18.2.3.5M Errata-1981 |
米制六角頭螺栓,正誤表 |
(Metric hex bolts; Errata) |
| ASME B18.2.3.5M-1979 |
米制六角頭螺栓 |
(Metric hex bolts) |
| ASME B18.2.3.6M Errata-1981 |
米制重型六角頭螺栓,正誤表 |
(Metric heavy hex bolts; Errata) |
| ASME B18.2.3.6M-1979 |
米制重型六角頭螺栓 |
(Metric heavy hex bolts) |
| ASME B18.2.3.7M Errata-1981 |
米制重型六角頭結構螺栓,正誤表 |
(Metric heavy hex structural bolts; Errata) |
| ASME B18.2.3.7M-1979 |
米制加重六角頭結構螺栓 |
(Metric heavy hex structural bolts) |
| ASME B18.2.3.8M-1981 |
米制六角木螺釘 |
(Metric hex lag screws) |
| ASME B18.2.3.9M-2001 |
米制大型六角頭法蘭螺釘 |
(Metric heavy hex flange screws) |
| ASME B18.2.4.1M-2002 |
米制1型六角螺母 |
(Metric hex nuts, style 1) |
| ASME B18.2.4.2M Errata-1982 |
米制2型六角螺母,正誤表 |
(Metric hex nuts, style 2; Errata) |
| ASME B18.2.4.2M-1979 |
米制2型六角螺母 |
(Metric hex nuts, style 2) |
| ASME B18.2.4.2M-2005 |
米制2型六角螺母 |
|
| ASME B18.2.4.3M Errata-1981 |
米制六角頭開槽螺母,正誤表 |
(Metric slotted hex nuts; Errata) |
| ASME B18.2.4.3M-1979 |
米制六角開槽螺母 |
(Metric slotted hex nuts) |
| ASME B18.2.4.4M-1982 |
米制六角法蘭螺母 |
(Metric hex flange nuts) |
| ASME B18.2.4.5M Errata-1981 |
米制六角頭鎖緊螺母,正誤表 |
(Metric hex jam nuts; Errata) |
| ASME B18.2.4.5M-1979 |
米制六角頭鎖緊螺母 |
(Metric hex jam nuts) |
| ASME B18.2.4.6M Errata-1981 |
米制重型六角頭螺母正誤表 |
(Metric heavy hex nuts; Errata) |
| ASME B18.2.4.6M-1979 |
米制重型六角螺母 |
(Metric heavy hex nuts) |
| ASME B18.2.6-1996 |
用于結構的緊固件 |
(Fasteners for use in structural applications) |
| ASME B18.2.7.1M Erratum-2002 |
米制12鍵槽凸緣螺釘.勘誤 |
(Metric 12-spline flange screws; Erratum) |
| ASME B18.2.7.1M-2002 |
米制12鍵槽凸緣螺釘 |
(Metric 12-spline flange screws) |
| ASME B18.21.1-1999 |
英制鎖緊墊圈 |
(Lock washers (Inch series)) |
| ASME B18.21.2M-1999 |
米制鎖緊墊圈 |
(Lock washers (Metric series)) |
| ASME B18.22.1-1965 |
平墊圈 |
(Plain washers) |
| ASME B18.22M Errata-1983 |
米制平墊圈.正誤表 |
(Metric plain washers; Errata) |
| ASME B18.22M-1981 |
米制平墊圈 |
(Metric plain washers) |
| ASME B18.24-2004 |
部件識別標準號(PIN) |
|
| ASME B18.24.1-1996 |
B18外螺紋產品領部件識別號(PIN)編碼系統標準 |
(Part identifying number (pin) code system standard for B18 externally threaded products) |
| ASME B18.24.3-1998 |
B18無螺紋產品用配件識別號(PIN)編碼系統標準 |
(Part identifying number (PIN) code system standard for B18 nonthreaded products) |
| ASME B18.25.1M-1996 |
正方形和長方形鍵和鍵槽 |
(Square and rectangular keys and keyways) |
| ASME B18.25.2M-1996 |
月牙鍵和鍵槽 |
(Woodruff keys and keyways) |
| ASME B18.27a Addenda-1999 |
錐形的縮徑橫斷面擋圈(英制系列).補充件 |
(Tapered and reduced cross section retaining rings (Inch series); Addenda) |
| ASME B18.27b Addenda-2000 |
錐形的縮徑橫斷面擋圈(英制系列).補充件 |
(Tapered and reduced cross section retaining rings (Inch series); Addenda) |
| ASME B18.29.1 Errata-1995 |
英制螺旋線圈螺釘用螺紋墊片.空轉和螺釘鎖定.正誤表 |
(Helical coil screw thread inserts - Free running and screw locking (Inchs series)) |
| ASME B18.29.1-1993 |
英制螺旋線圈螺釘用螺紋墊片.空轉和螺釘鎖定 |
(Helical coil screw thread inserts - Free running and screw locking (Inchs series)) |
| ASME B18.3-1998 |
六角鍵和花鍵圓柱頭內六角有肩定位螺釘(英制系列) |
(Socket cap, shoulder, and set screws, hex and spline keys (Inch series)) |
| ASME B18.3.1M-1986 |
米制凹頭帶帽螺釘 |
(Socket head cap screws (Metric series)) |
| ASME B18.3.2M-1979 |
米制六角板手和板手頭 |
(Metric series hexagon keys and bits) |
| ASME B18.3.3M-1986 |
米制六角凹頭有肩螺釘 |
(Hexagon socket head shoulder screws (Metric series)) |
| ASME B18.3.4M-1986 |
米制內六角圓頭帶帽螺釘 |
(Hexagon socket button head cap screws (Metric series)) |
| ASME B18.3.5M-1986 |
米制六角凹頭沉頭螺釘 |
(Hexagon socket flat countersunk head cap screws (Metric series)) |
| ASME B18.3.6M-1986 |
米制凹頭定位螺釘 |
(Metric series socket set screws) |
| ASME B18.5-1990 |
英制圓頭螺栓 |
(Round head bolts (Inch series)) |
| ASME B18.5.2.1M Erratum-2003 |
米制圓頭短方頸螺栓.技術勘誤 |
(Metric round head short square neck bolts; Erratum) |
| ASME B18.5.2.1M Erratum-2003 |
米制圓頭短方頸螺栓.技術勘誤 |
|
| ASME B18.5.2.1M-1996 |
米制圓頭短方頸螺栓 |
(Metric round head short square neck bolts) |
| ASME B18.5.2.2M-1982 |
米制圓頭方頸螺栓 |
(Metric round head square neck bolts) |
| ASME B18.5.2.3M-1990 |
帶大頭的米制圓頭方頸螺栓 |
(Round head square neck bolts with large head (Metric series)) |
| ASME B18.6.1-1981 |
英制木螺釘 |
(Wood screws (Inch series)) |
| ASME B18.6.2-1998 |
開槽圓頭螺釘、方頭定位螺釘和開槽無頭定位螺釘(英制系列) |
(Slotted head cap screws, square head set screws, and slotted headless set screws (Inch series)) |
| ASME B18.6.3-2003 |
機用螺釘和機用螺母 |
|
| ASME B18.6.5M-2000 |
米制螺紋形和螺紋自攻絲螺釘 |
(Metric thread-forming and thread-cutting tapping screws) |
| ASME B18.7-1972 |
通用半空心鉚釘，全空心鉚釘，開口鉚釘及鉚釘帽 |
(General purpose semi-tubular rivets, full tubular rivets, split rivets and rivet caps) |
| ASME B18.7.1M-1984 |
米制通用半空心鉚釘 |
(Metric general purpose semi-tubular rivets) |
| ASME B18.8.1 Errata-1995 |
U形夾銷和開尾銷(英制).勘誤 |
(Clevis pins and cotter pins (Inch series); Errata) |
| ASME B18.8.1-1994 |
U形夾銷和開尾夾銷 |
(Clevis pins and cotter pins (Inch series)) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com