標準號 |
中文名稱 |
英文名稱 |
| ASME PTC 11-1984 |
風扇 |
(Fans) |
| ASME PTC 12.1-2000 |
密封供水加熱器 |
(Closed feedwater heaters) |
| ASME PTC 12.4-1992 |
脫濕器再熱裝置 |
(Moisture separator reheaters) |
| ASME PTC 12.5-2000 |
單相熱交換器 |
(Single phase heat exchangers) |
| ASME PTC 14-1970 |
蒸發裝置 |
(Evaporating apparatus) |
| ASME PTC 16-1958 |
煤氣發生器和連續煤氣發生器 |
(Gas producers and continuous gas generators) |
| ASME PTC 17-1973 |
往復式內燃機 |
(Reciprocating internal-combustion engines) |
| ASME PTC 19.10-1981 |
裝置和儀器.第10部分:煙道及排放氣體分析 |
(Instruments and apparatus - Part 10: Flue and exhaust gas analyses) |
| ASME PTC 19.11-1997 |
動力循環中水和蒸汽的取樣、狀態調節和分析 |
(Steam and water sampling, conditioning, and analysis in the power cycle) |
| ASME PTC 19.14-1958 |
裝置和儀器.第14部分:線性測量 |
(Instruments and apparatus - Part 14: Linear measurements) |
| ASME PTC 19.16-1965 |
儀器和裝置.第16部分:固體和液體的密度測定 |
(Instruments and apparatus - Part 16: Density Determinations solids and liquids) |
| ASME PTC 19.17-1965 |
裝置和儀器:第17部分:液體粘度的測定 |
(Instruments and apparatus - Part 17: Determination of the viscosity of liquids) |
| ASME PTC 19.2-1987 |
裝置和儀器:第2部分:壓力測量 |
(Instruments and apparatus - Part 2: Pressure measurement) |
| ASME PTC 19.22-1986 |
裝置和儀器:第22部分:數字系統技術 |
(Instruments and apparatus - Part 22: Digital systems techniques) |
| ASME PTC 19.23-1980 |
裝置和儀器:第23部分:模型試驗指導手冊 |
(Instruments and apparatus - Part 23: Guidance manual for model testing) |
| ASME PTC 19.3-1974 |
裝置和儀器.第3部分:溫度測量 |
(Instruments and apparatus - Part 3: Temperature measurement) |
| ASME PTC 19.5-1972 |
用途,流量計第Ⅱ部分:裝置和儀器的臨時增補規范 |
(Application, Part II of fluid meters: Interim supplement on instruments and apparatus) |
| ASME PTC 19.5-2004 |
流量測量 |
|
| ASME PTC 19.5.1-1964 |
裝置和儀器.第5部分:材料數量測量.第1節:稱重標度 |
(Instruments and apparatus - Part 5: Measurement of quantity of materials - Chapter 1: Weighing Scales) |
| ASME PTC 19.7-1980 |
裝置和儀器.第7部分:傳動軸動力測量 |
(Instruments and apparatus - Part 7: Measurement of shaft power) |
| ASME PTC 19.8-1970 |
裝置和儀器.第8部分:指示功率測量 |
(Instruments and apparatus - Part 8: Measurement of indicated power) |
| ASME PTC 2-2001 |
定義和數值 |
(Definitions and values) |
| ASME PTC 20.1-1977 |
汽輪發電機組的速度和負載調節系統 |
(Speed and load governing systems for steam turbine-generator units) |
| ASME PTC 20.2-1965 |
汽輪發電機組用超速自動分離系統 |
(Overspeed trip systems for steam turbine-generator units) |
| ASME PTC 20.3-1970 |
汽輪發電機組用壓力控制系統 |
(Pressure control systems used on steam turbine-generator units) |
| ASME PTC 21-1991 |
顆粒物質收集設備 |
(Particulate matter collection equipment) |
| ASME PTC 22-1997 |
燃?xì)鉁u輪機的性能試驗規則 |
(Performance test code on gas turbines) |
| ASME PTC 23-1986 |
常壓水冷卻設備 |
(Atmospheric water cooling equipment) |
| ASME PTC 23-2003 |
常壓水冷設備 |
|
| ASME PTC 23.1-1983 |
噴淋冷卻系統規程 |
(Code on spray cooling systems) |
| ASME PTC 24-1976 |
噴射器 |
(Ejectors) |
| ASME PTC 25-2001 |
減壓設備 |
(Pressure relief devices) |
| ASME PTC 25.3-1988 |
安全和減壓閥 |
(Safety and relief valves) |
| ASME PTC 26-1962 |
內燃發電機組的速度調節系統 |
(Speed-governing systems for internal combustion engine-generator units) |
| ASME PTC 28-1965 |
細顆粒物質性能測定 |
(Determining the properties of fine particulate matter) |
| ASME PTC 29-1965 |
液壓汽輪發電機組的速度調節系統 |
(Speed-governing systems for hydraulic turbine-generator units) |
| ASME PTC 29-2005 |
液壓汽輪發電機組的速度調節系統 |
|
| ASME PTC 3.2-1990 |
煤和焦炭 |
(Coal and coke) |
| ASME PTC 3.3-1969 |
氣體燃料 |
(Gaseous fuels) |
| ASME PTC 30-1991 |
空氣冷卻式熱交換器 |
(Air cooled heat exchangers) |
| ASME PTC 31-1973 |
離子交換設備 |
(Ion exchange equipment) |
| ASME PTC 32.1-1969 |
核裝置蒸汽供給系統 |
(Nuclear steam supply systems) |
| ASME PTC 32.2 Report-1978 |
輕水反應堆中核燃料性能測試方法 |
(Methods of measuring the performance of nuclear reactor fuel in light water reactors) |
| ASME PTC 33-1978 |
大型焚化爐 |
(Large incinerators) |
| ASME PTC 33a Form-1980 |
簡易焚化爐效率試驗用ASME方式 |
(ASME Form for abbreviated incinerator efficiency test) |
| ASME PTC 36-1985 |
工業噪聲測量 |
(Measurement of industrial sound) |
| ASME PTC 38-1980 |
氣流中顆粒物質濃度的測定 |
(Determining the concentration of particulate matter in a gas stream) |
| ASME PTC 39-2005 |
蒸汽疏水閥 |
|
| ASME PTC 39.1-1980 |
蒸汽系統的冷凝水清除裝置 |
(Condensate removal devices for steam systems) |
| ASME PTC 4-1998 |
燃燒式蒸汽發生器 |
(Fired steam generators) |
| ASME PTC 4.2-1969 |
煤塊粉碎機.PTC4.1蒸汽發生組件運行測試規程補充件 |
(Coal pulverizers - Supplement to performance test code for steam generating units, PTC 4.1) |
| ASME PTC 4.3-1968 |
空氣加熱器.PTC4.1蒸汽發生組件運行測試規程補充件 |
(Air heaters - Supplement to performance test code for steam generating units, PTC 4.1) |
| ASME PTC 4.4-1981 |
燃?xì)廨啓C(jī)熱回收蒸汽發生器 |
(Gas turbine heat recovery steam generators) |
| ASME PTC 40-1991 |
廢氣脫硫裝置 |
(Flue gas desulfurization units) |
| ASME PTC 42-1988 |
風力渦輪機 |
(Wind turbines) |
| ASME PTC 5-1949 |
往復式蒸汽發動機 |
(Reciprocating steam engines) |
| ASME PTC 50-2002 |
燃料電池電源系統性能 |
(Fuel cell power systems performance) |
| ASME PTC 6 Report-1985 |
汽輪機運行試驗中測量不確定度的評定導則 |
(Guidance for evaluation of measurement uncertainty in performance tests of steam turbines) |
| ASME PTC 6-1996 |
汽輪機 |
(Steam turbines) |
| ASME PTC 6-2004 |
蒸汽輪機 |
|
| ASME PTC 6.2-2004 |
組合循環中蒸汽渦輪機 |
|
| ASME PTC 6S Report-1988 |
汽輪機常規運行試驗程序 |
(Procedures for routine performance tests of steam turbines) |
| ASME PTC 7-1949 |
往復式蒸汽驅動活塞泵 |
(Reciprocating steam-driven displacement pumps) |
| ASME PTC 7.1-1962 |
活塞泵 |
(Displacement pumps) |
| ASME PTC 8.2-1990 |
離心泵 |
(Centrifugal pumps) |
| ASME PTC 9 Erratum-1972 |
容積式壓縮機,真空泵和鼓風機.正誤表 |
(Displacement compressors, vacuum pumps, and blowers; Erratum) |
| ASME PTC 9-1970 |
容積式壓縮機,真空泵和鼓風機 |
(Displacement compressors, vacuum pumps, and blowers) |
| ASME PTC PM-1993 |
蒸汽發電廠運行監控導則 |
(Performance monitoring guidelines for steam power plants) |
| ASME PVHO-2-2003 |
載人壓力容器的安全標準:使用中的PVHO丙烯窗指南 |
|
| ASME QAI-1-2003 |
授權檢驗的資格證明 |
|
| ASME QAI-1-2003 |
授權檢驗的資格證明 |
|
| ASME QAI-1-2005 |
授權檢驗的資格證明 |
|
| ASME QEI-1-2001 |
升降機檢驗師資格證書標準 |
(Standard for the qualification of elevator inspectors) |
| ASME QEI-1-2004 |
升降機檢驗師資格證書標準 |
|
| ASME QEI-1a Addenda-2001 |
升降機檢驗師資格證書標準 |
(Standard for the qualification of elevator inspectors; Addenda) |
| ASME QEI-1b Addenda-2003 |
電梯檢驗人員合格資格鑒定.附錄 |
(Standard for the qualification of elevator inspectors; Addenda) |
| ASME QEI-1b Addenda-2003 |
電梯檢驗人員合格資格鑒定.附錄 |
|
| ASME QEI-2000 |
有QEI認可證書的公司 |
(Companies holding QEI certificates of accreditation) |
| ASME QHO-1-1994 |
危險廢物焚燒爐操作人員的資格鑒定和認證標準 |
(Standard for the qualification and certification of hazardous waste incinerator operators) |
| ASME QHO-1-2004 |
危險廢棄物焚燒裝置操作員的資格評定和認證標準 |
|
| ASME QHO-1a Addenda-1996 |
危險廢棄物焚燒裝置操作員的資格證書和認證標準.修改件1 |
(Qualification and certification of hazardous waste incinerator operators; Addenda) |
| ASME QME-1a Addenda-1998 |
核電廠用放射性機械設備的合格證書.附錄 |
(Qualification of active mechanical equipment used in nuclear power plants; Addenda) |
| ASME QRO-1-1994 |
資源回收設備操作人員的資格證書和認證的標準 |
(Standard for the qualification and certification of resource recovery facility operators) |
| ASME QRO-1a Addenda-1996 |
資源回收設備操作人員的資格證書和認證的標準.修改件1 |
(Qualification and certification of resource recovery facility operators; Addenda) |
| ASME QRO-1b Addenda-1998 |
資源修復裝置操作者的資格和認證 |
(Qualification and certification of resource recovery facility operators; Addenda) |
| ASME RA-S-2002 |
核電廠設施的概率風險評估 |
(Probalistic risk assessment for nuclear power plant applications) |
| ASME RA-Sa Addenda-2003 |
核電廠設施的概率風險評估 |
|
| ASME RTP-1-2000 |
增強熱固塑料耐腐蝕設備 |
(Reinforced thermoset plastic corrosion resistant equipment) |
| ASME RTP-1b Addenda-2002 |
增強熱固塑料耐腐蝕設備.補充 |
(Reinforced thermoset plastic corrosion resistant equipment; Addenda) |
| ASME RTP-1c Addenda-2003 |
增強熱固性塑料耐腐蝕設備 |
|
| ASME RTP-1d Addenda-2004 |
增強熱固性塑料耐腐蝕設備.附錄 |
|
| ASME SI-10-1976 |
蒸氣圖.SI(米制)和美國通用單位 |
(Steam charts - SI (metric) and U.S. customary units) |
| ASME SI-2-1976 |
材料強度的SI單位 |
(SI units in strength of materials) |
| ASME SI-3-1976 |
動力學SI單位 |
(SI units in dynamics) |
| ASME SI-4-1976 |
熱力學SI單位 |
(SI units in thermodynamics) |
| ASME SI-5-1976 |
流體力學SI單位 |
(SI units in fluid mechanics) |
| ASME SI-6-1976 |
運動學SI單位 |
(SI units in kinematics) |
| ASME SI-7-1977 |
熱傳遞SI單位 |
(SI units in heat transfer) |
| ASME SI-8-1976 |
振動SI單位 |
(SI units in vibration) |
| ASME SI-9 Errata-1982 |
SI(米)單位代碼和標準的公制化指南.正誤表 |
(Guide for metrication of codes and standards SI (metric) units) |
| ASME SI-9-1981 |
SI(米)單位代碼和標準的公制化指南 |
(Guide for metrication of codes and standards SI (metric) units) |
| ASME SPPE-1-1994 |
海上石油和天然氣開發用安全和防污染設備的質量保證和認證 |
(Quality assurance and certification of safety and pollution prevention equipment used in offshore oil and gas operations) |
| ASME SPPE-1b Addenda-1995 |
海上石油和天然氣開發用安全和防污染設備的質量保證和認證.修改件1 |
(Quality assurance and certification of safety and pollution prevention equipment used in offshore oil and gas operations; Addenda) |
| ASME SPPE-1d Addenda-1996 |
海上石油和天然氣開發用安全和防污染設備的質量保證和認證.修改件 |
(Quality assurance and certification of safety and pollution prevention equipment used in offshore oil and gas operations; Addenda) |
| ASME SPPE-2-1994 |
海上石油和天然氣開發用安全和防污染設備測試試驗室的認可 |
(Accreditation of testing laboratories for safety and pollution prevention equipment used in offshore oil and gas operations) |
| ASME SPPE-2a Addenda-1994 |
海上石油和天然氣開發用安全和防污染設備測試試驗室的認可.附錄 |
(Accreditation of testing laboratories for safety and pollution prevention equipment used in offshore oil and gas operations; Addenda) |
| ASME SPPE-2b Addenda-1995 |
海上石油和天然氣開發用安全和防污染設備的測試實驗室的認可.附錄 |
(Accreditation of testing laboratories for safety and pollution prevention equipment used in offshore oil and gas operations; Addenda) |
| ASME SPPE-2d Addenda-1996 |
海上石油和天然氣開發用安全和防污染設備測試試驗室的認可.修改件 |
(Accreditation of testing laboratories for safety and pollution prevention equipment used in offshore oil and gas operations; Addenda) |
| ASME STS-1-2000 |
鋼制煙囪 |
(Steel stacks) |
| ASME STS-1a Addenda-2003 |
鋼制豎管.補充件 |
|
| ASME Y 10.5-1968 |
電氣科學和電氣工程中量的字母符號 |
Letter symbols for quantities used in electrical science and electrical engineering |
| ASME Y 14.1-1995 |
繪圖紙尺寸和規格 |
Decimal inch drawing sheet size and format |
| ASME Y 14.13M-1981 |
機械彈簧圖示 |
Mechanical spring representation |
| ASME Y 14.18M-1986 |
光學零件 |
Optical parts |
| ASME Y 14.1M-1995 |
米制繪圖紙尺寸和規格 |
Metric drawing sheet size and format |
| ASME Y 14.24-1999 |
工程圖的類型和應用 |
Types and applications of engineering drawings |
| ASME Y10.1-1972 |
有關字母符號的術語詞匯 |
(Glossary of terms concerning letter symbols) |
| ASME Y10.12-1955 |
化工用字母符號 |
(Letter symbols for chemical engineering) |
| ASME Y10.17-1961 |
工程數學上選用希臘字母作為字母符號的指南 |
(Guide for selecting Greek letters used as letter symbols for engineering mathematics) |
| ASME Y10.18-1967 |
照明工程用字母符號 |
(Letter symbols for illuminating engineering) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com