標準號 |
中文名稱 |
英文名稱 |
| ANSI/ASME B31.4-2002 |
烴類、液化石油氣、無水氨和醇類用液體輸送系統 |
(Liquid Transportation Systems for Hydrocarbons, Liquid Petroleum Gas, Anhydrous Ammonia, and Alcohols ) |
| ANSI/ASME B31.8-2003 |
氣體輸送和分配管道系統 |
(Gas Transmission and Distribution Piping Systems ) |
| ANSI/ASME B31.8S-2004 |
燃?xì)夤艿赖墓芾硐到y(tǒng)完整性 |
|
| ANSI/ASME B31.8S-2004 |
燃?xì)夤艿赖墓芾硐到y(tǒng)完整性 |
|
| ANSI/ASME B31.9-2004 |
建筑物服務設施用壓力管道標準 |
|
| ANSI/ASME B36.10M-2004 |
焊接鍛鋼管和無縫鍛鋼管 |
|
| ANSI/ASME B36.19M-2004 |
不銹鋼管 |
|
| ANSI/ASME B40.200a-2003 |
直讀式和遙控溫度計 |
(Thermometers, Direct Reading and Remote Reading ) |
| ANSI/ASME B46.1-2002 |
表面特征(表面粗糙度、波紋度和扭轉度) |
(Surface Texture (Surface Roughness, Waviness, and Lay) ) |
| ANSI/ASME B5.52-2003 |
GAP型(米制)通用單點機械動力壓力機 |
(Presses, General Purpose, Single Point, Gap Type, Mechanical Power (Metric) ) |
| ANSI/ASME B5.54-2003 |
計算機數控加工中心機床性能評定方法 |
(Performance Evaluation of Computer Numerically Controlled Machining Centers, Methods for ) |
| ANSI/ASME B5.54-2005 |
計算機數字控制的組合加工中心機床的性能評定方法 |
|
| ANSI/ASME B5.60.1-2002 |
工件夾具.爪式夾具.第1部分:一般說明和術語定義 |
(Workholding Chucks - Jaw Type Chucks, Part 1: General Description and Definitions of Terms ) |
| ANSI/ASME B5.60.4-2002 |
工件夾具.爪式夾具.第4部分:性能試驗 |
(Workholding Chucks - Jaw Type Chucks, Part 4: Performance Testing ) |
| ANSI/ASME B5.60a-2005 |
工件夾具.爪式夾具(附錄) |
|
| ANSI/ASME B5.61-2003 |
通用單向壓制直邊型凹版速印機 |
(Power Presses - General Purpose Single Action Straight Side Type ) |
| ANSI/ASME B56.1-2004 |
低升力和高升力貨車 |
|
| ANSI/ASME B56.1b-2003 |
低起升和高起升車輛 |
(Low Lift and High Lift Trucks ) |
| ANSI/ASME B56.5-2004 |
工業導向車輛的安全標準和載人工業車輛的自動化功能 |
|
| ANSI/ASME B56.6-2002 |
不平地帶用的叉車 |
(Rough Terrain Forklift Trucks ) |
| ANSI/ASME B73.2M-2003 |
化工用立式直列式離心泵規范 |
(Vertical In-Line Centrifugal Pumps for Chemical Process, Specifications for ) |
| ANSI/ASME B73.3M-2003 |
不密封臥式端吸裝置規范 |
(Specification for Sealless Horizontal End Suction ) |
| ANSI/ASME B89.1.6M, Rev.2-2002 |
用作校準環規和環規的合格普通內徑的測量 |
(Qualified Plain Internal Diameters for Use as Master Rings and Ring Gages, Measurement of ) |
| ANSI/ASME B89.4.22-2004 |
鉸接臂坐標測量機械的性能評價方法 |
|
| ANSI/ASME B89.7.3.3-2002 |
尺寸測量不可靠聲明的可信賴性評估導則 |
(Guidelines for Assessing the Reliability of Dimensional Measurement Uncertainty Statements ) |
| ANSI/ASME BPE-2002 |
生物加工設備 |
Bioprocessing Equipment |
| ANSI/ASME BPEa-2004 |
生物處理設備 |
|
| ANSI/ASME BPVC Edition-2001 |
ASME鍋爐和壓力容器編碼 |
ASME Boiler and Pressure Vessel Code |
| ANSI/ASME BPVCRevision Addenda-2002 |
ASME鍋爐和壓力容器編碼(9/14/01 mtg) |
(ASME Boiler and Pressure Vessel Code (9/14/01 mtg) ) |
| ANSI/ASME BPVCRevision-2004 |
ASME鍋爐和壓力容器代碼.第7節 |
|
| ANSI/ASME BPVCRevision-2004 |
ASME鍋爐和壓力容器代碼.第7節 |
|
| ANSI/ASME BPVCRevision-2005 |
ASME鍋爐和壓力容器代碼 |
|
| ANSI/ASME CSD-1-2002 |
自動點火鍋爐用控制和安全設備 |
Controls and Safety Devices for Automatically Fired Boilers |
| ANSI/ASME CSD-1-2004 |
自動點火鍋爐用控制和安全設備 |
|
| ANSI/ASME CSD-1-2004 |
自動點火鍋爐用控制和安全設備 |
|
| ANSI/ASME HPS-1994 |
高壓系統 |
High Pressure Systems |
| ANSI/ASME HPS-2003 |
高壓系統 |
(High Pressure Systems ) |
| ANSI/ASME HST-1M-1989 |
電動環鏈起重機性能標準 |
Performance Standard for Electric Chain Hoists |
| ANSI/ASME HST-2M-1989 |
手鏈?zhǔn)饺斯げ僮鳝h(huán)鏈起重機性能標準 |
Performance Standard for Hand Chain Manually Operated Chain Hoists |
| ANSI/ASME HST-3M-1991 |
手柄式人工操作環鏈起重機性能標準 |
Performance Standard for Manually Lever-Operated Chain Hoists |
| ANSI/ASME HST-4M-1991 |
懸吊式電動纜索起重機性能標準 |
Performance Standard for Overhead Electric Wire Rope Hoists |
| ANSI/ASME HST-5M-1991 |
氣動環鏈起重機性能標準 |
Air Chain Hoists |
| ANSI/ASME HST-6M-1986 |
氣動鋼索起重機性能標準 |
Performance Standard for Air Wire Rope Hoists |
| ANSI/ASME MC 88.1-1972 |
壓力傳感器的動態校準導則 |
Dynamic Calibration of Pressure Transducers, Guide for |
| ANSI/ASME MC 88.2-1974 |
容器水位測定皮尺和探深尺臺架校準程序 |
Bench Calibration of Tank Level Gaging Tapes and Sounding Rules, Procedure for (formerly designated as ANSI B88.2) |
| ANSI/ASME MFC-10M-1994 |
確定安裝對流量計的影響方法 |
Method for Establishing Installation Effects on Flowmeters |
| ANSI/ASME MFC-11M-1989 |
利用科氏質量流量計測量液體流量 |
Measurement of Fluid Flow By Means of Coriolis Mass Flowmeters |
| ANSI/ASME MFC-11M-2003 |
用科氏流量計測量液體流量 |
(Measurement of Fluid Flow by Means of Coriolis Flowmeters ) |
| ANSI/ASME MFC-14M-1995 |
小孔精確孔板儀測量液體流量 |
Measurement of Fluid Flow Using Small Bore Precision Orifice Meters |
| ANSI/ASME MFC-14M-2003 |
小孔精確孔板儀測量液體流量 |
(Measurement of Fluid Flow Using Small Bore Precision Orifice Meters ) |
| ANSI/ASME MFC-16M-1995 |
用電磁流量儀測量封閉管道中液體流量 |
Measurement of Fluid Flow in Closed Conduits by Means of Electromagnetic Flowmeters |
| ANSI/ASME MFC-18M-2001 |
用可變面積計量計測量管道中的液體流量 |
Measurement of Fluid Flow in Pipes Using Variable Area Meters |
| ANSI/ASME MFC-1M-1991 |
液體流量測量用術語匯編 |
Measurement of Fluid Flow, Glossary of Terms Used in the |
| ANSI/ASME MFC-1M-2003 |
液體流量測量用術語匯編 |
(Measurement of Fluid Flow, Glossary of Terms Used in the ) |
| ANSI/ASME MFC-3M-1-2004 |
用孔板、噴嘴和文杜利流量計測量管道中液體流量.第1部分:總則 |
|
| ANSI/ASME MFC-3M-2-2004 |
用孔板、噴嘴和文杜利流量計測量管道中液體流量.第2部分:孔板 |
|
| ANSI/ASME MFC-3M-3-2004 |
用孔板、噴嘴和文杜利流量計測量管道中液體流量.第3部分:噴嘴和文杜利噴嘴 |
|
| ANSI/ASME MFC-3M-4-2004 |
用孔板、噴嘴和文杜利流量計測量管道中液體流量.第4部分:文杜利流量計 |
|
| ANSI/ASME MFC-4M-1986 |
渦輪儀測量氣體流量 |
Measurement of Gas Flow by Turbine Meters |
| ANSI/ASME MFC-5M-1985 |
利用過渡時間超聲流量計測量密封管道中的液體流量 |
Liquid Flow in Closed Conduits Using Transit-Time Ultrasonic Flow Meters, Measurement of |
| ANSI/ASME MFC-6M-1998 |
用渦流流量計測量管道中的液體流量 |
Fluid Flow in Pipes Using Vortex Flow Meters, Measurement of |
| ANSI/ASME MFC-7M-1987 |
利用臨界流量文氏噴嘴管測量氣體流量 |
Gas Flow by Means of Critical Flow Venturi Nozzles, Measurement of |
| ANSI/ASME MFC-8M-1988 |
密封管道中液體流量.主設備和副設備之間壓力信號傳導的連接 |
Fluid Flow in Closed Conduits - Connections for Pressure Signal Transmission Between Primary and Secondary Devices |
| ANSI/ASME MH 1.1.2-1996 |
涉及托盤及相關結構的定義和術語 |
Definitions and Terminology Covering Pallets and Related Structures |
| ANSI/ASME MH 1.2.2M-1989 |
托盤尺寸 |
Pallet Sizes |
| ANSI/ASME MH 1.4.1M-1996 mh 1-1997 |
托盤試驗程序 |
Procedures for Testing Pallets |
| ANSI/ASME MH 1.5M-1993 |
薄襯紙 |
Slip Sheets |
| ANSI/ASME MH 1.6-1996 mh 1-1997 |
木制托盤和相關結構耐久性測定用標準程序 |
Standard Procedures for Determination of Durability of Wooden Pallets and Related Structures |
| ANSI/ASME MH 1.7M-1996 mh 1-1997 |
托盤及相關結構的組配用傳動緊固件 |
Driven Fasteners for Assembly of Pallets and Related Structures |
| ANSI/ASME MH 1.8M-1996 |
木制托盤 |
Wood Pallets |
| ANSI/ASME MH 1a Part IV-1998 |
出口商品用托盤 |
Export Pallets |
| ANSI/ASME MH 1b-2000 |
成組貨件用托盤、滑板和其他底座 |
Pallets, Slip Sheets, and Other Bases for Unit Loads |
| ANSI/ASME MH1-2003 |
成組貨件用托盤、滑板和其它基板 |
(Pallets, Slip Sheets, and Other Bases for Unit Loads ) |
| ANSI/ASME MH1-2005 |
成組貨件用托盤、滑板和其它基板 |
|
| ANSI/ASME N 278.1-1975 |
與安全相關的自動和機動閥門功能規范標準 |
Self-Operated and Power Operated Safety-Related Valves Functional Specification Standard |
| ANSI/ASME N 509-1989 |
核電廠空氣凈化設備和部件 |
Nuclear Power Plant Air Cleaning Units and Components |
| ANSI/ASME N 510-1989 |
核空氣凈化系統的測試 |
Testing of Nuclear Air-Cleaning Systems |
| ANSI/ASME N 626.3-1993 |
特殊專業工程師的資格鑒定和責任 |
Qualifications and Duties of Specialized Professional Engineers |
| ANSI/ASME N509-2002 |
核電廠空氣凈化設備和部件 |
(Nuclear Power Plant Air Cleaning Units and Components ) |
| ANSI/ASME NOG-1-2002 |
橋式和門式起重機(支承橋和多橫梁)的制造規則 |
Overhead and Gantry Cranes (Top Running Bridge, Multiple Girder), Rules for Construction of |
| ANSI/ASME NOG-1-2004 |
橋式和門式起重機(支承橋和多橫梁)的制造規則 |
|
| ANSI/ASME NQA-1-2004 |
核設施的質量保證要求 |
|
| ANSI/ASME NQA-1a-2002 |
核設施的質量保證要求 |
(Quality Assurance Requirements for Nuclear Facility Applications ) |
| ANSI/ASME NUM-1-1996 |
起重機、單軌鐵路和提升機的制造規則(帶有懸橋或懸掛式吊車或懸掛式提升機) |
Rules for Construction of Cranes, Monorails, and Hoists (with Bridge or Trolley or Hoist of the Underhung Type) |
| ANSI/ASME NUM-1-2004 |
起重機、單軌吊車和提升機的制造規則(帶有懸橋或懸掛式吊車或懸掛式提升機) |
|
| ANSI/ASME NUM-1a-2002 |
起重機、單軌和提升機的建造規則 |
(Rules for Construction of Cranes, Monorails and Hoists ) |
| ANSI/ASME NUM-1b-2002 |
起重機、單軌鐵路和提升機的制造規則 |
(Rules for Construction of Cranes, Monorails, and Hoists ) |
| ANSI/ASME OM Code-2001 |
核動力工廠的維護和操作 |
Operation and Maintenance of Nuclear Power Plants |
| ANSI/ASME OM-1990 |
核電站的運行和養護 |
Operation and Maintenance of Nuclear Power Plants |
| ANSI/ASME OM-S/Ga-2001 |
核動力工廠的維護和操作的標準和指南 |
Standards and Guides for Operation and Maintenance of Nuclear Power Plants |
| ANSI/ASME OM-S/Ga-2004 |
核電站的運行和維護的標準和指南 |
|
| ANSI/ASME OMaCode-2005 |
核電廠的操作和維修規范 |
|
| ANSI/ASME OMb-S/G-2003 |
核電站的操作和維修標準和指南 |
(Standards and Guides for Operation and Maintenance of Nuclear Power Plants ) |
| ANSI/ASME OMb-S/G-2005 |
核電廠操作和維護的標準和指南 |
|
| ANSI/ASME OMbCode-2003 |
核電站的操作和維修 |
(Operation and Maintenance of Nuclear Power Plants ) |
| ANSI/ASME OMCode-2004 |
核電廠的維護和操作標準 |
|
| ANSI/ASME PALD-1997 |
便攜式自動提升裝置 |
Portable Automotive Lifting Devices |
| ANSI/ASME PALD-2003 |
便攜式自動提升裝置 |
(Portable Automotive Lifting Devices ) |
| ANSI/ASME PALDb-2002 |
可移動自動升降裝置 |
Portable Automotive Lifting Devices |
| ANSI/ASME PCC-1-2000 |
壓力界限法蘭連接接頭組件的導則 |
Guidelines for Pressure Boundary Bolted Flange Joint Assembly |
| ANSI/ASME PTC 10-1974 |
性能測試規范.壓縮機及排氣機 |
Performance Test Code - Compressors and Exhausters |
| ANSI/ASME PTC 10.1-1997 |
壓縮機和排氣器的臨時試驗標準 |
Interim Test Code on Compressors and Exhausters |
| ANSI/ASME PTC 11-1984 |
風扇 |
Fans |
| ANSI/ASME PTC 12.1-1978 |
性能測試規范.密封式供水加熱器 |
Performance Test Code - Closed Feedwater Heaters |
| ANSI/ASME PTC 12.2-1998 |
蒸汽冷凝裝置的性能試驗標準 |
Performance Test Code - Steam-Condensing Apparatus |
| ANSI/ASME PTC 12.3-1997 |
空氣分離器 |
Deaerators |
| ANSI/ASME PTC 12.4-1992 |
脫濕器再熱爐 |
Moisture Separator Reheaters |
| ANSI/ASME PTC 12.5-2000 |
單相熱交換器 |
Single Phase Heat Exchangers |
| ANSI/ASME PTC 14-1970 |
性能測試規范.蒸發裝置 |
Performance Test Code - Evaporating Apparatus |
| ANSI/ASME PTC 16-1958 |
性能測試規范.氣體發生器和連續氣體發生器 |
Performance Test Code - Gas Producers and Continuous Gas Generators |
| ANSI/ASME PTC 17-1973 |
性能試驗規范.往復式內燃機 |
Performance Test Code - Reciprocating Internal-Combustion Engines |
| ANSI/ASME PTC 18-1992 |
水輪機 |
Hydraulic Turbines |
| ANSI/ASME PTC 19.1-1998 |
測量不確定度.儀器和裝置 |
Measurement Uncertainty - Instruments and Apparatus |
| ANSI/ASME PTC 19.11-1997 |
動力循環中水和蒸汽的取樣、調節和分析 |
Steam and Water Sampling, Conditioning and Analysis in the Power Cycle |
| ANSI/ASME PTC 19.2-1987 |
壓力測量儀器儀表.第2部分 |
Pressure Measurement Instruments and Apparatus - Part 2 |
| ANSI/ASME PTC 19.22-1986 |
儀器儀表.數字系統技術 |
Instruments and Apparatus - Digital Systems Techniques |
| ANSI/ASME PTC 19.23-1980 |
模型試驗指導手冊.儀器儀表 |
Guidance Manual for Model Testing - Instruments and Apparatus |
| ANSI/ASME PTC 19.3-1974 |
性能測試規范.溫度測量 |
Performance Test Code - Temperature Measurement |
| ANSI/ASME PTC 19.7-1980 |
軸功率測量.儀器儀表 |
Measurement of Shaft Horsepower - Instruments and Apparatus |
| ANSI/ASME PTC 19.8-1970 |
性能測試規范.測量指示功率用儀器儀表 |
Performance Test Code - Measurement of Indicated Power, Instruments and Apparatus |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com