標準號 |
中文名稱 |
英文名稱 |
| IEEE 300-1988 |
半導體帶電粒子探測器試驗規程 |
Test procedures for semiconductor charged-particle detectors |
| IEEE 301-1988 |
電離輻射探測器用放大器和前置放大器的試驗規程 |
Test procedures for amplifiers and preamplifiers used with detectors of ionizing radiation |
| IEEE 303-1991 |
第1類中A、B、C、D組第2分部所列電動機輔助裝置用推薦規程 |
Recommended practice for auxiliary devices for motors in class 1, groups A, B, C, and D, division 2 locations |
| IEEE 304-1977 |
直流電機用絕緣系統評定及分類的試驗規程 |
Test procedure for evaluation and classification of insulation systems for direct-current machines |
| IEEE 308-1991 |
核電站1E級電力系統的標準 |
Criteria for class 1E power systems for nuclear power generating stations |
| IEEE 309-1999 |
蓋革-彌勒計數器試驗規程和基礎 |
Test procedures and bases for Geiger-Mueller counters |
| IEEE 315-1975 |
電氣和電子圖表用圖形符號 |
Graphic symbols for electrical and electronics diagrams |
| IEEE 315A-1986 |
電氣和電子圖表的圖形符號補充件 |
Supplement to graphic symbols for electrical and electronics diagrams |
| IEEE 317-1983 |
核電站外殼結構的電氣穿入組件 |
Electric penetration assemblies in containment structures for nuclear power generating stations |
| IEEE 32-1972 |
中性接地裝置的要求,術語和試驗程序 |
Requirements, terminology, and test procedure for neutral grounding devices |
| IEEE 323-1983 |
核電站1E級設備的考核 |
Qualifying class 1E equipment for nuclear power generating stations |
| IEEE 325-1996 |
鍺γ射線探測器的試驗規程 |
Test procedures for germanium gamma-ray detectors |
| IEEE 334-1994 |
核電站用1E級發動機連續運行的考核 |
Qualifying continuous duty class 1E motors for nuclear power generating stations |
| IEEE 336-1985 |
核裝置的電力、儀表和控制設備的安裝、檢驗及試驗要求 |
Installation, inspection, and testing requirements for power, instrumentation, and control equipment at nuclear facilities |
| IEEE 338-1987 |
核電站安全系統周期試驗的準則 |
Criteria for the periodic surveillance testing of nuclear power generating station safety systems |
| IEEE 344-1987 |
核電站1E級設備抗地震鑒定的推薦規程 |
Recommended practice for seismic qualification of class 1E equipment for nuclear power generating stations |
| IEEE 352-1987 |
核電站安全系統可靠度分析通用原則指南 |
Guide for general principles of reliability analysis of nuclear power generating station safety systems |
| IEEE 356-2001 |
測量接地介質電磁特性的指南 |
Guide for measurements of electromagnetic properties of earth media |
| IEEE 367-1996 |
測定電源故障引起的電站地面電位升高和感應電壓的推薦規程 |
Recommended practice for determining the electric power station ground potential rise and induced voltage from a power fault |
| IEEE 376-1975 |
脈沖強度及帶寬測量 |
Measurement of impulse strength and impulse bandwidth |
| IEEE 377-1980 |
陸地移動通信發射機附加發射的測量規程 |
Recommended practice for measurement of spurious emission from land-mobil communication transmitters |
| IEEE 379-2000 |
核電站安全系統中單一故障標準的應用 |
Application of the single-failure criterion to nuclear power generating station safety systems |
| IEEE 382-1996 |
對核電站用有安全功能的電動閥組驅動器的鑒定 |
Qualification of actuators for power-operated valve assemblies with safety-related functions for nuclear power plants |
| IEEE 383-1974 |
1E級電纜型式試驗;核電站的現場拼接和聯接 |
Type test of class 1E electric cables; field splices and connections for nuclear power generating stations |
| IEEE 384-1992 |
1E級設備和電路獨立性的判定標準 |
Criteria for independence of class 1E equipment and circuits |
| IEEE 386-1995 |
600V以上配電系統用可分絕緣連接器系統 |
Separable insulated connector systems for power distribution systems above 600 V |
| IEEE 387-1995 |
用作核電站備用電源的柴油發電機組準則 |
Criteria for diesel-generator units applied as standby power supplies for nuclear power generating stations |
| IEEE 388-1992 |
電子功率轉換設備中的變壓器和電感線圈 |
Transformers and inductors in electronic power conversion equipment |
| IEEE 389-1996 |
測試電子變壓器和電感器的推薦規程 |
Recommended practice for testing electronic transformers and inductors |
| IEEE 390-1987 |
脈沖變壓器 |
Pulse transformers |
| IEEE 398-1972 |
閃爍計數器用光電倍增管試驗程序和閃爍計數專業詞匯 |
Test procedures for photomultipliers for scintillation counting and glossary for scintillation counting field |
| IEEE 399-1997 |
工業及商業電力系統分析用推薦規程 |
Recommended practice for industrial and commercial power systems analysis |
| IEEE 4-1995 |
高壓測試技術 |
Techniques for high-voltage testing |
| IEEE 400-2001 |
鎧裝電力電纜系統絕緣的現場試驗和評定指南 |
Guide for field testing and evaluation of the insulation of shielded power cable systems |
| IEEE 404-2000 |
額定電壓2500V-500000V的擠壓和層壓介質鎧裝電纜接頭 |
Extruded and laminated dielectric shielded cable joints rated 2500 V to 500000 V |
| IEEE 420-2001 |
核電站用1E級控制板、操縱臺及操縱儀表架的設計和鑒定 |
Design and qualification of class 1E control boards, panels, and racks used in nuclear power generating stations |
| IEEE 421.1-1986 |
同步電機勵磁系統的定義 |
(Definitions for excitation systems for synchronous machines) |
| IEEE 421.2-1990 |
勵磁控制系統動態性能鑒別、試驗和評定的指南 |
Guide for identification, testing, and evaluation of the dynamic performance of excitation control systems |
| IEEE 421.3-1997 |
同步機械勵磁系統擊活高潛力試驗要求標準 |
Standard for high-potential test requirements for excitation systems for synchronous machines |
| IEEE 421.4-1990 |
勵磁系統規范制訂指南 |
Guide for the preparation of excitation system specifications |
| IEEE 421.5-1992 |
動力系統穩定性研究用勵磁系統模型推薦規程 |
Recommended practice for excitation system models for power system stability studies |
| IEEE 429-1994 |
使用額定電壓6900V及以下電機模繞預絕緣定子線圈的AC電機的熱絕緣評定推薦規程 |
Recommended practice for thermal evaluation of sealed insulation systems for AC electric machinery employing form-wound preinsulated stator coils for machines rated 6900 V and below |
| IEEE 43-2000 |
檢測旋轉電機絕緣電阻的推薦實施規范 |
Recommended practice for testing insulation resistance of rotating machinery |
| IEEE 432-1992 |
旋轉電機(5hp-10000hp)絕緣維護指南 |
Guide for insulation maintenance for rotating electric machinery (5 hp to less than 10000 hp) |
| IEEE 433-1974 |
高壓甚低頻大型旋轉電機絕緣試驗的推薦規程 |
Recommended practice for insulation testing of large ac rotating machinery with high voltage at very low frequency |
| IEEE 434-1973 |
大型高壓電機絕緣系統功能評定指南 |
Guide for functional evaluation of insulation systems for large high-voltage machines |
| IEEE 442-1981 |
土壤耐熱性測量指南 |
Guide for soil thermal resistivity measurements |
| IEEE 446-1995 |
工業及商業設備用應急及備用供電系統推薦規程 |
Recommended practice for emergency and standby power systems for industrial and commercial applications |
| IEEE 449-1998 |
鐵磁諧振調壓器 |
Ferroresonant voltage regulators |
| IEEE 45-2002 |
船上電氣設備的推薦實施規程 |
Recommended practice for electric installations on shipboard |
| IEEE 450-1995 |
發電站及變電所用大型鉛蓄電池組維護、試驗及更換推薦規程 |
Recommended practice for maintenance, testing and replacement of vented lead-acid batteries for stationary applications |
| IEEE 450-2002 |
通氣固定鉛蓄電池組的維護、試驗及更換 |
(Maintenance, testing, and replacement of vented lead-acid batteries for stationary applications) |
| IEEE 473-1985 |
電磁現場測量(10kHz-10GHz)無線電噪聲的推薦規程 |
Recommended practice for an electromagnetic site survey (10 kHz to 10 Ghz) |
| IEEE 475-2000 |
300 MHz-40 GHz場干擾傳感器的測量程序 |
Measurement procedure for field disturbance sensors 300 MHz to 40 GHz |
| IEEE 48-1996 |
2.5KV-765KV高壓交流電纜終端的試驗程序和要求 |
Test procedures and requirements for alternating-current cable terminations 2.5 kV through 765 kV |
| IEEE 484-2002 |
發電站用透氣式鉛酸蓄電池組設計、安裝推薦規程 |
Recommended practice for installation design and installation of vented lead-acid batteries for stationary applications |
| IEEE 485-1997 |
固定設施用酸性鉛蓄電池尺寸測定推薦規程 |
Recommended practice for sizing lead-acid batteries for stationary applications |
| IEEE 487-2000 |
電站有線通訊設施的保護 |
Protection of wireline communication facilities serving electric supply locations |
| IEEE 488.1-1987 |
可編程序設備的數字接口 |
Digital interface for programmable instrumentation |
| IEEE 488.2-1992 |
與IEEE 488.1-87可編程序設備的數字接口一同使用的代碼、格式、協議和通用命令 |
Codes, formats, protocols and common commands for use with IEEE 488.1-1987 Digital interface for programmable instrumentation |
| IEEE 493-1997 |
可靠的工業及商業電力系統設計用推薦規程 |
Recommended practice for design of reliable industrial and commercial power systems |
| IEEE 497-2002 |
核電站事故監測儀器裝置標準 |
Criteria for accident monitoring instrumentation for nuclear power generating stations |
| IEEE 499-1989 |
水泥廠電氣傳動裝置及相關電氣設備的推薦規程 |
Recommended practice for cement plant electric drives and related electrical equipment |
| IEEE 4a-2001 |
高壓試驗技術 |
Techniques for high-voltage testing |
| IEEE 502-1985 |
使用礦物燃料的機組連接蒸汽站的保護、聯鎖及控制指南 |
Guide for protection, interlocking, and control of fossil-fueled unit-connected steam stations |
| IEEE 505-1977 |
發電站電力系統術語命名 |
Nomenclature for generating station electric power systems |
| IEEE 510-1983 |
高電壓及高功率安全性推薦規程 |
Recommended practices for safety in high-voltage and high-power testing |
| IEEE 515-1997 |
工業用電阻熱示蹤的試驗、設計、安裝及維護 |
Testing, design, installation, and maintenance of electrical resistance heat tracing for industrial applications |
| IEEE 516-1995 |
供能電力導線維修方法指南 |
Guide for maintenance methods on energized power lines |
| IEEE 516-2003 |
帶電電力線維修方法指南 |
(Guide for maintenance methods on energized power lines) |
| IEEE 517-1974 |
單自由度速率積分陀螺儀的規范格式指南和試驗程序 |
Specification format guide and test procedure for single-degree-of-freedom rate-integrating gyros |
| IEEE 518-1982 |
用于降低外部電源電噪聲輸入控制器的電氣設備的安裝指南 |
Guide for the installation of electrical equipment to minimize electrical noise inputs to controllers from external sources |
| IEEE 519-1992 |
電源系統諧波控制推薦規程和要求 |
Recommended Practices and requirements for harmonic control in electrical power systems |
| IEEE 521-2002 |
雷達頻帶的字母標志 |
Letter designations for radar-frequency bands |
| IEEE 522-1992 |
交流旋轉電機模繞定子線圈匝間絕緣的試驗指南 |
Guide for testing turn-to-turn insulation on form-wound stator coils for alternating-current rotating electric machines |
| IEEE 524-1992 |
架空傳輸線路導線的安裝 |
Installation of overhead transmission line conductors |
| IEEE 524a-1993 |
架空傳輸線路導體安裝過程中的接地指南.對IEEE架空傳輸線路導體安裝指南的補充 |
Guide to grounding during the installation of overhead transmission line conductors; Supplement to IEEE Guide to the installation of overhead transmission line conductors |
| IEEE 525-1992 |
變電站電纜系統設計和安裝指南 |
Guide for the design and installation of cable systems in substations |
| IEEE 528-2001 |
慣性傳感器術語 |
Inertial Sensor Terminology |
| IEEE 529-1980 |
單自由度速率積分陀螺儀標準規范格式指南和試驗程序用捷聯式設備補充件 |
Supplement of strapdown applications to IEEE standard specification format guide and test procedure for single-degree-of-freedom rate integrating gyros |
| IEEE 532-1993 |
電纜護套的選擇和試驗指南 |
Guide for selecting and testing jackets for underground cables |
| IEEE 535-1986 |
核電站用1E級鉛蓄電池組的鑒定 |
Qualification of class 1E lead storage batteries for nuclear power generating stations |
| IEEE 539-1990 |
架空電力線路電暈和無線電噪聲用術語的定義 |
Definitions of terms relating to corona and field effects of overhead power lines |
| IEEE 56-1977 |
大型交流旋轉電機(10kVA及以上)絕緣維護指南 |
Guide for insulation maintenance of large ac rotating machinery (10000 kVA and larger) |
| IEEE 563-1978 |
導線自阻尼測量指南 |
Guide on conductor self-damping measurements |
| IEEE 572-1985 |
核電站1E級連接組件的鑒定 |
Qualification of class 1E connection assemblies for nuclear power generating stations |
| IEEE 576-2000 |
石化工業用絕緣電力電纜的安裝、端接和試驗推薦規程 |
Recommended practice for installation, termination, and testing of insulated power cable as used in industrial and commercial applications |
| IEEE 577-1976 |
核電站安全系統的設計和運行中的可靠性分析要求 |
Requirements for reliability analysis in the design and operation of safety systems for nuclear power generating stations |
| IEEE 583-1982 |
模塊化工具與數字接口系統(CAMAC) |
Modular instrumentation and digital interface system (CAMAC) |
| IEEE 592-1990 |
高壓電纜接頭和可分離絕緣連接器的外露半導體護套 |
Exposed semiconducting shields on high-voltage cable joints and separable insulated connectors |
| IEEE 595-1982 |
串行公用通道接口系統(CAMAC) |
Serial highway interface system (CAMAC) |
| IEEE 596-1982 |
并行公用通道接口系統(CAMAC) |
Parallel highway interface system (CAMAC) |
| IEEE 602-1996 |
保健設施中電氣系統的推薦規程 |
Recommended practice for electric systems in health care facilities |
| IEEE 603-1998 |
核電站安全系統準則 |
Criteria for safety systems for nuclear power generating stations |
| IEEE 605-1998 |
變電所剛性總線結構的設計 |
Design of substation rigid-bus structures |
| IEEE 610.12-1990 |
軟件工程術語集 |
Glossary of software engineering terminology |
| IEEE 62-1995 |
電力裝置鑒別現場試驗指南.第1部分:油浸式電力變壓器,調節器和電抗器 |
Guide for diagnostic field testing of electrical power apparatus - Part 1: Oil filled power transformers, regulators, and reactors |
| IEEE 620-1996 |
松鼠籠誘導機用放熱極限曲線介紹指南 |
Guide for the presentation of thermal limit curves for squirrel cage induction machines |
| IEEE 622-1987 |
核電站電熱追蹤系統的設計與安裝推薦規程 |
Recommended practice for the design and installation of electric heat tracing systems for nuclear power generating stations |
| IEEE 622A-1984 |
發電站管道電加熱控制及報警系統的設計及安裝用推薦規程 |
Recommended practice for the design and installation of electric pipe heating control and alarm systems for power generating stations |
| IEEE 622B-1988 |
發電站電熱追蹤系統試驗及起動程序用推薦規程 |
Recommended practice for testing and startup procedures for electric heat tracing systems for power generating stations |
| IEEE 625-2001 |
水泥工業電氣維護和安全改善的推薦實施規程 |
Recommended practices to improve electrical maintenance and safety in the cement industry |
| IEEE 627-1980 |
核電站安全系統設備的設計鑒定 |
Design qualification of safety systems equipment used in nuclear power generating stations |
| IEEE 628-2001 |
核電站1E級電路的電纜管道系統的設計、安裝和鑒定標準 |
Criteria for the design, installation, and qualification of raceway systems for class 1E circuits for nuclear power generating stations |
| IEEE 635-1989 |
電力電纜鋁護套的選擇和設計指南 |
Guide for selection and design of aluminium sheaths for power cables |
| IEEE 637-1985 |
絕緣油回收指南和絕緣油使用準則 |
Guide for the reclamation of insulating oil and criteria for its use |
| IEEE 638-1992 |
核電站1E級變壓器的鑒定 |
Qualification of class 1E transformers for nuclear power generating stations |
| IEEE 643-1980 |
電力線載波應用指南 |
Guide for power-line carrier applications |
| IEEE 644-1994 |
交流電力線路工業頻率電場和磁場的測量方法 |
Measurement of power frequency electric and magnetic fields from AC power lines |
| IEEE 647-1995 |
單軸激光陀螺規格導則和試驗規程 |
Format guide and test procedure for single-axis laser gyros |
| IEEE 649-1991 |
核電站1E級電動控制中心的鑒定 |
Qualifying class 1E motor control centers for nuclear power generating stations |
| IEEE 650-1990 |
核電站1E級固定式電池充電器和逆變器的合格鑒定 |
Qualification of class 1E static battery chargers and inverters for nuclear power generating stations |
| IEEE 656-1992 |
架空傳輸線可聞噪聲的測量 |
Measurement of audible noise from overhead transmission lines |
| IEEE 662-1992 |
半導體存儲器術語 |
Terminology for semiconductor memory |
| IEEE 664-1993 |
單芯電纜風振阻振器電力分散特性實驗室測量指南 |
Guide for laboratory measurement of the power dissipation characteristics of aeolian vibration dampers for single conductors |
| IEEE 665-1995 |
電站接地裝置 |
Generating station grounding |
| IEEE 666-1991 |
發電站電力服務系統設計指南 |
Design guide for electric power service systems for generating stations |
| IEEE 67-1990 |
渦輪發電機操作和維護指南 |
Guide for operation and maintenance of turbine generators |
| IEEE 671-1985 |
非回轉慣性角度傳感器急跳、加速度、速度和位移的規范格式指南 |
Specification format guide and test procedure for nongyroscopic inertial angular sensors; jerk, acceleration, velocity, and displacement |
| IEEE 675-1982 |
CAMAC系統內的多重控制器 |
Multiple controllers in a CAMAC crate |