標準號 |
中文名稱 |
英文名稱 |
| ANSI/IEEE 802.1H-1995 |
802局域網內以太網版本2.0的媒介通道控制(MAC)橋推薦規程 |
Recommended Practice for Media Access Control (MAC) Bridging of Ethernet Version 2.0 in 802 Local Area Networks |
| ANSI/IEEE 802.1k-1994 |
LAN/MAN管理補充:前置事件的發現和動態控制標準 |
LAN/MAN (Local Area Network/Metropolitan Area Network) Management Supplement: Standard for Discovery and Dynamic Control of Event Forwarding |
| ANSI/IEEE 802.1m-1994 |
系統負載協議補充:管理目標定義和協議執行相容說明(PICS)程序(ANSI/IEEE802.1-1990的補充) |
System Load Protocol Supplement: Managed Object Definitions and Protocol Implementation Conformance Statement (PICS) Proforma |
| ANSI/IEEE 802.1s-2002 |
局域網和城域網標準.802.1Q虛擬橋式局域網的修改:多重生成樹 |
(Standards for Local and Metropolitan Area Networks - Amendment to 802.1Q Virtual Bridged Local Area Networks: Multiple Spanning Trees ) |
| ANSI/IEEE 802.1u-2001 |
虛擬橋式局域網標準.技術勘誤1:技術和編輯修正 |
Standard for Virtual Bridged Local Area Networks - Corrigendum 1: Technical and Editorial Corrections |
| ANSI/IEEE 802.1v-2001 |
局域網和城域網標準:虛擬橋式局域網:根據協議和端口分類VLAN |
Standards for Local and Metropolitan Area Networks: Virtual Bridged Local Area Networks: VLAN Classification by Protocol and Port |
| ANSI/IEEE 802.1w-2001 |
信息技術.系統間的電信和信息交換.局域和城域網.通用規范.第3部分:媒介存取控制橋.修改件2.快速再配置 |
Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks - Common Specifications - Part 3: Media Access Control (MAC) Bridges: Amendment 2 - Rapid Reconfiguration |
| ANSI/IEEE 802.1x-2001 |
網絡存取控制端口 |
Port Based Network Access Control |
| ANSI/IEEE 802.1X-2004 |
基于端口的網絡訪問控制 |
|
| ANSI/IEEE 802.2 Edition-1994 |
信息處理系統.局域網.第2部分:邏輯鏈接控制 |
Information Processing Systems - Local Area Networks - Part 2: Logical Link Control |
| ANSI/IEEE 802.3-1996 |
信息技術.系統間的信息交換和電信.局域網和城域網.特殊要求.第3部分:帶有沖突檢測存取方法的載波檢測多路訪問(C8MA/CD)及物理層規范 |
|
| ANSI/IEEE 802.3-2002 |
信息技術.系統間的信息交換和電信.局域網和城域網.特殊要求.第3部分:帶有沖突檢測存取方法的載波檢測多路訪 |
(Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks - Specific Requirements - Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Laye |
| ANSI/IEEE 802.3ae-2002 |
信息技術標準.局域網和城域網.第3部分:采用沖突檢測存取方法的載波檢測多址(CSMA/CD)及物理層規范.物理層媒 |
(Standard for Information Technology - Local & Metropolitan Area Networks - Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications - Media Access Control (MAC) Parameters, Physical Layer, ) |
| ANSI/IEEE 802.3af-2003 |
信息技術標準.系統間遠程通信和信息交換.局域網和城域網.特殊要求.第3部分:沖突檢測載波檢測多路訪問(CSMA/ |
(Standard for Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks - Specific Requirements - Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and |
| ANSI/IEEE 802.3ah-2004 |
信息技術標準修改件.系統間的遠程通信和信息交換.局域網和城域網.特殊要求.第3部分:沖突檢測載波檢測多路訪問(CSMA/CD)的訪問方法及物理層規范.用戶訪問網絡的媒體訪問控制參數、物理層和管理參數 |
|
| ANSI/IEEE 802.3ak-2004 |
信息技術標準.系統間的遠程通信和信息交換.局域網和城域網.特殊要求.第3部分:沖突檢測載波檢測多路存取法和物理層規范.修改件:10GBASE-CX4型10Gb/s物理層規范和管理參數 |
|
| ANSI/IEEE 802.5c-1991 |
局域網和城域網標準:令牌環通路方法和物理層規范:雙環操作推薦實施規程 |
Standards for Local and Metropolitan Area Networks: Supplement to Token Ring Access Method and Physical Layer Specifications: Recommended Practice for Dual Ring Operation with Wrapback Reconfiguration |
| ANSI/IEEE 802.5d-1992 |
信息處理系統.局域網:互連令牌環存取方法及物理層規范-互連令牌環LANs |
Information Processing Systems - Local Area Networks: Interconnected Token Ring Access Method and Physical Layer Specification - Interconnected Token Ring LANs |
| ANSI/IEEE 802.5g-1992 |
信息處理系統.局域網:令牌環存取方法及物理層規范-一致性試驗 |
Information Processing Systems - Local Area Networks: Token Ring Access Method and Physical Layer Specifications - Conformance Testing |
| ANSI/IEEE 802.5j Edition-1993 |
信息技術.系統間通信和信息交換.局域和城域網.技術報告和指南.第4部分:令牌環通路方法 |
Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks - Technical Reports and Guidelines - Part 4: Token Ring Access Method |
| ANSI/IEEE 802.5p-1994 |
信息處理系統.局域網.第二部分:邏輯電路控制.附件x:終端系統路線的確定 |
Information Processing Systems - Local Area Networks - Part 2: Logical Link Control - Annex X: End Systems Route Determination |
| ANSI/IEEE 802.5v-2001 |
信息技術.系統間通信和信息交換.本地或都市區域網絡.第5部分:記號鈴聲存取方法和物理層規范 |
Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks - Part 5: Token Ring Access Method and Physical Layer Specifications - Gigabit Token Ring Operation, Amendment |
| ANSI/IEEE 802.6 Edition-1994 |
信息技術.系統間通信和信息交換.局域和城域網.特殊要求.第6部分:分配隊列雙母線通路法和物理層規范 |
|
| ANSI/IEEE 802.6j-1995 |
在城域網絡間斷序列雙總線網絡上定向服務連接 |
Connection-Oriented Service on a Distributed Queue Dual Bus Subnetwork of a Metropolitan Area Network (MAN) |
| ANSI/IEEE 802.6k-1993 |
信息技術.系統間通信和信息交換.局域和城域網.城域網分配隊列雙母線次級網 |
Information Technology - Telecommunications and Information Exchange between Systems - Distributed Queue Dual Bus Subnetwork of a Metropolitan Area Network |
| ANSI/IEEE 802.7-1989 |
寬帶局域網的推薦實施規程 |
Recommended Practices for Broad Band Local Area Networks (LAN) |
| ANSI/IEEE 802a-2003 |
局域網和城域網.綜述和體系結構.修改1:原型和自動售貨機特殊協議制定的以太型 |
(Local and Metropolitan Area Networks - Overview and Architecture - Amendment 1: Ethertypes for Prototype and Vendor-Specific Protocol Development ) |
| ANSI/IEEE 802b-2004 |
局域網和城域網.概覽和體系結構.修改件2:對象識別符的注冊 |
|
| ANSI/IEEE 803-1983 |
發電廠和有關設施的唯一識別的推薦實施規程.原理和定義 |
Unique Identification in Power Plants and Related Facilities, Principles and Definitions, Recommended Practice for |
| ANSI/IEEE 803.1-1992 |
發電廠和有關設施唯一識別的推薦規程.件功能標識符 |
Recommended Practice for Unique Identification in Power Plants and Related Facilities - Component Function Identifiers |
| ANSI/IEEE 804-1983 |
發電廠和有關設施實現唯一識別的推薦規程 |
Identification in Power Plants and Related Facilities, Recommended Practice for Implementation of Unique |
| ANSI/IEEE 805-1984 |
核電廠及有關設施系統識別的推薦實施規程 |
System Identification in Nuclear Power Plants and Related Facilities, Recommended Practice |
| ANSI/IEEE 806-1986 |
化石燃料動力工廠和相關裝置的識別系統的推薦規程 |
Identification in Fossil-Fueled Power Plants and Related Facilities, Recommended Practice for Systems |
| ANSI/IEEE 81.2-1992 |
大型、擴展或互聯接地系統阻抗及安全特性測量指南 |
Guide for the Measurement of Impedance and Safety Characteristics of Large, Extended, or Interconnected Grounding Systems |
| ANSI/IEEE 810-1994 |
水輪機和發電機整體鍛軸配合和軸公差標準 |
Standard for Hydraulic Turbine and Generator Integrally Forged Shaft Couplings and Shaft Tolerances |
| ANSI/IEEE 813-1988 |
二自由度動力調諧陀螺規格格式指南和測試程序 |
Procedure for Two-Degree-of-Freedom Dynamically-Tuned Gyros, Specification Format Guide and Test |
| ANSI/IEEE 816-1987 |
電線電纜用固體絕緣和包覆材料的煙霧測定指南 |
Smoke Generation of Solid Materials Used for Insulations and Coverings of Electric Wire and Cable, Guide for Determining |
| ANSI/IEEE 82-2002 |
絕緣導體的脈沖電壓試驗的標準試驗規程 |
(Standard Test Procedure for Impulse Voltage Tests on Insulated Conductors ) |
| ANSI/IEEE 820-1984 |
電話環路性能特征 |
Telephone Loop Performance Characteristics |
| ANSI/IEEE 823-1989 |
語言電話學用規定語音級信道參數和評價連接傳遞性能的分類法 |
Methodologies for Specifying Voice Grade Channel Transmission Parameters and Evaluating Connection Transmission Performance for Speech Telephony |
| ANSI/IEEE 824-1994 |
動力系統系列電容器標準 |
Standard for Series Capacitors in Power Systems |
| ANSI/IEEE 824-2004 |
動力系統系列電容器標準 |
|
| ANSI/IEEE 824-2004 |
動力系統系列電容器標準 |
|
| ANSI/IEEE 829-1983 |
軟件試驗文件編制 |
Software Test Documentation |
| ANSI/IEEE 833-1988 |
核電站電氣設備防水害推薦實施規程 |
Recommended Practices for the Protection of Electric Equipment in Nuclear Power Generating Stations from Water Hazards |
| ANSI/IEEE 835-1994 |
電力電纜的載流量表 |
Power Cable Ampacity Tables |
| ANSI/IEEE 836-1992 |
線性加速度計精密離心試驗的推薦實施規程 |
Precision Centrifuge Testing of Linear Accelerometers, Recommended Practice for |
| ANSI/IEEE 837-1989 |
變電站接地件的永久性聯接的質量鑒定 |
Qualifying Permanent Connections Used in Substation Grounding |
| ANSI/IEEE 837-2002 |
變電站接地件的永久性聯接的質量鑒定 |
(Qualifying Permanent Connections Used in Substation Grounding ) |
| ANSI/IEEE 841-1994 |
化學工業.不超過500hp的負載式完全封閉電扇制冷的鼠籠式感應電動機. |
Chemical Industry - Severe Duty Totally Enclosed Fan-Cooled (TEFC) Squirrel Cage Induction Motors - Up to and Including 500 hp |
| ANSI/IEEE 844-1991 |
管路和容器的電阻抗.電感和集膚效應生熱的推薦規程 |
Electrical Impedance, Induction, and Skin Effect Heating of Pipelines and Vessels, Recommended Practice for |
| ANSI/IEEE 848-1996 |
防火電纜載容量測定的標準規程 |
Standard Procedure for the Determination of the Ampacity Derating of Fire Protected Cables |
| ANSI/IEEE 853-1985 |
漆包線電壓耐久性試驗的推薦操作規程 |
Enameled Wire, Recommended Practice for Voltage Endurance Testing of |
| ANSI/IEEE 854-1988 |
浮點運算于基數無關的標準 |
A Radix-Independent Standard for Floating-Point Arithmetic |
| ANSI/IEEE 857-1996 |
高壓直流半導體閘流管閥門試驗過程的推薦實施規程 |
Recommended Practice for Test Procedures for High Voltage Direct Current Thyristor Valves |
| ANSI/IEEE 859-2002 |
報告和分析電氣傳輸設施的中斷發生和中斷狀態的術語 |
(Terms for Reporting and Analyzing Outage Occurrences and Outage States of Electrical Transmission Facilities ) |
| ANSI/IEEE 86-1987 |
交流旋轉電機每一基本單位數量的定義 |
Alternating-Current Rotating Machines, Definitions of Basic Per Unit Quantities for |
| ANSI/IEEE 896.1 Edition-1994 |
多處理器結構的后連線板母線規范:備用母線.邏輯層規范 |
Backplanes Bus Specification for Multiprocessor Architectures: Futurebus+, Logical Layer Specification |
| ANSI/IEEE 896.10-1997 |
備用母線空間系統,刨面S |
Futurebus+ Spaceborne Systems, Profile S |
| ANSI/IEEE 896.2-1991 |
預設總線.物理層和輪廓規范 |
Futurebus+ - Physical Layer and Profile Specifications |
| ANSI/IEEE 896.2a-1994 |
預設總線.物理層及輪廓規范 |
Futurebus+ - Physical Layer and Profile Specifications |
| ANSI/IEEE 896.3-1993 |
預設總線推薦規程 |
Recommended Practice for Futurebus+ |
| ANSI/IEEE 896.4-1993 |
預設總線一致性試驗要求 |
Conformance Test Requirements for Futurebus+ |
| ANSI/IEEE 896.4a-1995 |
預設總線的一致性試驗要求.勘誤,修正和分類 |
Conformance Test Requirements for Futurebus+ - Errata, Corrections, and Clarifications |
| ANSI/IEEE 896.9-1994 |
備用母線結構公差擴展 |
Fault Tolerant Extensions to the Futurebus+ Architecture |
| ANSI/IEEE 91-1984 |
邏輯函數的圖形符號 |
Graphic Symbols for Logic Functions |
| ANSI/IEEE 928-1986 |
陸地光電電力系統性能標準 |
Terrestrial Photovoltaic Power Systems, Performance Criteria for |
| ANSI/IEEE 930-1995 |
電氣絕緣的電壓耐久性數據的統計分析指南 |
Electrical Insulation Voltage Endurance Data, Guide for the Statistical Analysis of |
| ANSI/IEEE 930-2005 |
電絕緣電壓耐久性數據的統計分析指南 |
|
| ANSI/IEEE 934-1987 |
核電站1E級設備備件的要求 |
Replacement Parts for Class 1E Equipment in Nuclear Power Generating Stations, Requirements for |
| ANSI/IEEE 935-1995 |
帶電工作用工具和器械的術語 |
Terminology for Tools and Equipment to be Used in Live Line Working |
| ANSI/IEEE 936-1987 |
自換相變換器指南 |
Guide for Self-Commutated Converters |
| ANSI/IEEE 937-1987 |
光電系統用鉛酸蓄電池組的安裝及維護推薦規范 |
Installation and Maintenance of Lead-Acid Batteries for Photovoltaic (PV) Systems, Practice for |
| ANSI/IEEE 94-1992 |
電力系統自動發電控制用術語定義的推薦規程 |
Recommended Practice for Definitions of Terms for Automatic Generation Control on Electric Power Systems |
| ANSI/IEEE 944-1986 |
發電站不間斷供電的應用和試驗的推薦規程 |
Uninterruptible Power Supplies for Power Generating Stations, Recommended Practice for the Application and Testing of |
| ANSI/IEEE 945-1984 |
電氣和電子科學和技術使用的優選米制單位 |
Preferred Metric Units for Use in Electrical and Electronics Science and Technology |
| ANSI/IEEE 946-1993 |
核電站用的與安全有關的直流輔助動力系統設計 |
Safety-Related DC Auxiliary Power Systems for Nuclear Power Generating Stations, Design of |
| ANSI/IEEE 95-1977 |
采用直流高電壓對大型交流旋轉電機做絕緣試驗的推薦規程 |
Insulation Testing of Large AC Rotating Machinery with High Direct Voltage, Recommended Practice for |
| ANSI/IEEE 95-2002 |
具有直流高電壓的大型交流旋轉電機的絕緣試驗的推薦實施規程 |
(Insulation Testing of Large AC Rotating Machinery with High Direct Voltage, Recommended Practice for ) |
| ANSI/IEEE 951-1996 |
金屬傳輸結構的建立組裝指南 |
Guide to the Assembly and Erection of Metal Transmission Structures |
| ANSI/IEEE 952-1997 |
單軸干涉法光纖陀螺儀的標準規范格式指南和試驗程序 |
Standard Specification Format Guide and Test Procedure for Single-Axis Interferometric Fiber Optic Gyros |
| ANSI/IEEE 957-1995 |
絕緣子清洗指南 |
Guide for Cleaning Insulators |
| ANSI/IEEE 957-2005 |
絕緣子清洗指南 |
|
| ANSI/IEEE 958-2003 |
發電站中2400至13800V輔助系統上可調速交流傳動裝置的應用指南 |
(Guide for Application of AC Adjustable-Speed Drives on 2,400 to 13,800 Volt Auxiliary Systems in Electric Power Generating Stations ) |
| ANSI/IEEE 96-1992 |
短時間歇或變負荷工作電氣設備額定值的一般原則 |
General Principles for Rating Electric Apparatus for Short-Time Intermittent or Varying Duty |
| ANSI/IEEE 960-1993 |
FASTBUS模塊式高速數據獲取和控制系統和FASTBUS常規標準 |
FASTBUS Modular High-Speed Data Acquisition and Control System and FASTBUS Standard Routines (includes ANSI/IEEE 1177-1994) |
| ANSI/IEEE 977-1991 |
輸電線結構基礎安裝指南 |
Installataion of Foundations for Transmission Line Structures, Guide for |
| ANSI/IEEE 979-1994 |
變電站的防火指南 |
Fire Protection, Guide for Substation |
| ANSI/IEEE 98-1984 |
固體電絕緣材料熱量評估的測試程序的準備 |
Thermal Evaluation of Solid Electrical Insulating Materials, Preparation of Test Procedures for the |
| ANSI/IEEE 98-2002 |
固體電絕緣材料熱評定用測試程序的編制 |
(Thermal Evaluation of Solid Electrical Insulating Materials, Preparation of Test Procedures for the ) |
| ANSI/IEEE 980-1994 |
變電站油溢污染的防止與控制指南 |
Guide for Containment and Control of Oil Spills in Substations |
| ANSI/IEEE 99-1980 |
電氣設備絕緣系統的熱評價測試程序準備 |
Thermal Evaluation of Insulation Systems for Electric Equipment, Preparation of Test Procedures for the |
| ANSI/IEEE 990-1987 |
程序設計語言Ada的推薦規程 |
ADA as a Program Design Language, Recommended Practice for |
| ANSI/IEEE 991-1986 |
邏輯線路圖 |
Logic Circuit Diagrams |
| ANSI/IEEE 993-1997 |
試驗設備描述語言(TEDL) |
Test Equipment Description Language (TEDL) |
| ANSI/IEEE 995-1987 |
交流調速傳動裝置效率測定.第1部分:負載整流的倒相同步電動機驅動裝置 |
Efficiency Determination of Alternating-Current Adjustable-Speed Drives, Part 1 - Load Commutated Inverter Synchronous Motor Drives |
| ANSI/IEEE 997-1985 |
ASC11系列測量儀表回路(SAIL)數據通信標準 |
Serial ASCII Instrumentation Loop (SAIL) Data Communication Standard |
| ANSI/IEEE 998-1996 |
變電所直接閃電防護遮蔽指南 |
Guide for Direct Lightning Stroke Shielding of Substations |
| ANSI/IEEE 999-1993 |
主/遠程SCADA通信 |
Master/Remote SCADA Communication |
| ANSI/IEEE C 136.31-2001 |
路面照明設備.照明設備振動 |
Roadway and Area Lighting Equipment - Luminaire Vibration |
| ANSI/IEEE C 2 1943-1990 |
國家電氣安全代碼譯釋集合1943-1990(非美國國家標準) |
National Electrical Safety Code Interpretation Collections, 1943-1990, Inclusive (NOT AN AMERICAN NATIONAL STANDARD) |
| ANSI/IEEE C 37 Collection-1995 |
C37標準的收集 |
Collection of C37 Standards |
| ANSI/IEEE C 37.10-1996 |
電力斷路器的診斷和故障調查導則 |
Guide for Diagnostic and Failure Investigation of Power Circuit Breakers |
| ANSI/IEEE C 37.11-1997 |
對襯電流基礎上的AC高壓斷路器的電氣控制標準要求 |
Standard Requirements for Electrical Control for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis |
| ANSI/IEEE C 37.110-1996 |
用于防護繼電的電流互感器使用指南 |
Guide for the Application of Current Transformers Used for Protective Relaying Purposes |
| ANSI/IEEE C 37.112-1996 |
過流繼電器的標準反向時間特性 |
Standard Inverse-Time Characteristic for Overcurrent Relays |
| ANSI/IEEE C 37.20.4-2001 |
金屬外殼開關設備用室內交流開關(1kV-38kV)標準 |
Standard for Indoor AC Switches (1 kV - 38 kV) for Use in Metal-Enclosed Switchgear |
| ANSI/IEEE C 37.40b-1996 |
并聯電容器外部熔斷器的標準工作條件和定義 |
Standard Service Conditions and Definitions for External Fuses for Shunt Capacitors |
| ANSI/IEEE C 37.41e-1996 |
并聯電容器外部熔斷器的標準設計試驗 |
Standard Design Tests for External Fuses for Shunt Capacitors |
| ANSI/IEEE C 37.48-1998 |
高壓熔斷器、配電封口單極空氣開關、熔絲切斷開關及附件的應用、操作和維護的IEEE指南 |
Application, Operation, and Maintenance of High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories, Guide for |
| ANSI/IEEE C 37.71-2001 |
三相交流電系統亞層負載斷開開關手工操作的要求 |
Three Phase, Manually Operated Subsurface Load Interrupting Switches for Alternating-Current Systems, Requirements for |
| ANSI/IEEE C 37.90.2-1995 |
發射機輻射電磁干擾中繼系統的抵抗能力標準 |
Standard for Withstand Capability of Relay Systems to Radiated Electromagnetic Interference from Transceivers |
| ANSI/IEEE C 37.90.3-2001 |
防護性繼電器的靜電放電試驗 |
Electrostatic Discharge Tests for Protective Relays |
| ANSI/IEEE C 57 Collection-1995 |
C57標準的收集 |
Collection of C57 Standards |
| ANSI/IEEE C 57.119-2002 |
在超出銘牌額定值的負荷下進行油浸電力變壓器升溫試驗的推薦規程 |
Recommended Practice for Performing Temperature Rise Tests on Oil Immersed Power Transformers at Loads Beyond Nameplate Ratings |
| ANSI/IEEE C 57.12.35-1996 |
配電變壓器的標準條形編碼 |
Standard Bar Coding for Distribution Transformers |
| ANSI/IEEE C 57.16-1996 |
干式空心串連電感器的標準要求、術語和試驗規范 |
Standard Requirements, Terminology and Test Code for Dry-Type Air-Core Series Connected Reactors |
| ANSI/IEEE C 57.19.03-1996 |
直流電流用套管的標準要求、術語和試驗規范 |
Standard Requirements, Terminology and Test Code for Bushings for DC Applications |
| ANSI/IEEE C 57.19.100-1995 |
電力設備套管應用指南 |
Guide for Application of Power Apparatus Bushings |
| ANSI/IEEE C 57.93-1995 |
液體浸入電力變壓器的安裝指南 |
Guide for Installation of Liquid Immersed Power Transformers |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com