微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| NF A91-200 | 熱噴涂.術語、分類 | (Thermal spraying. Terminology, classification.) |
| NF A91-211 | 熱噴涂層的試驗.膠粘劑抗拉強度的測定 | (THERMAL SPRAYING. DETERMINATION OF TENSILE ADHESIVE STRENGTH. (EUROPEAN STANDARD EN 582).) |
| NF A91-212 | 熱噴涂.熱噴涂設備的驗收檢驗 | (THERMAL SPRAYING. ACCEPTANCE INSPECTION OF THERMAL SPRAYING EQUIPMENT. (EUROPEAN STANDARD EN 1395).) |
| NF A91-213 | 熱噴涂.粉末.合成物.技術供應條件 | (THERMAL SPRAYING. POWDERS. COMPOSITION. TECHNICAL SUPPLY CONDITIONS. (EUROPEAN STANDARD EN 1274).) |
| NF A91-215 | 熱噴涂.工程元件用熱噴鍍涂層的應用程序 | (Thermal spraying - Procedures for the application of thermally sprayed coatings for engineering components.) |
| NF A91-219 | 熱噴涂.熔噴和電弧噴涂用線材、桿材和軟線.分類.技術支持條件 | (Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification - Technical supply conditions.) |
| NF A91-221 | 熱噴涂.熱噴涂器鑒定試驗 | (Thermal spraying. Approval testing of thermal sprayers.) |
| NF A91-222 | 熱噴涂.熱噴涂配合.任務和責任 | (Thermal spraying - Thermal spray coordination - Tasks and responsabilities.) |
| NF A91-224 | 熱噴涂.熱噴涂用金屬零部件的表面預處理 | (Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying.) |
| NF A91-225 | 熱噴涂.高溫下防腐蝕和氧化涂層 | (Thermal spraying - Coatings for protection against corrosion and oxidation at elevated temperatures.) |
| NF C23-528 | 防爆電氣設備.易燃材料靜電噴涂設備的選擇.安裝和使用的要求.第1部分:手持式靜電噴涂槍 | (ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES. ENCAPSULATION “M“. (EUROPEAN STANDARD EN 50 028).) |
| NF C23-548 | 不易燃液體噴涂材料用自動靜電噴涂設備 | (Automatic electrostatic spraying equipment for non-flammable liquid spraying material.) |
| NF C23-550 | 潛在易爆環境中用的電氣裝置.手持式靜電噴涂設備 | (Electrical apparatus for potentially explosive atmospheres - Electrostatic hand-held spraying equipment.) |
| NF C23-553-1 | 可燃物品用靜電噴涂設備的使用.安置及選擇規則.第1部分:極限能量為0.24MJ.并帶輔助裝置的涂料手持式靜電噴 | () |
| NF C23-553-3 | 可燃物品用靜電噴涂設備的選擇、安裝和使用要求.第3部分:極限能量為0.24MJ或5MJ的手持靜電絨絮噴射槍及輔助 | () |
| NF C23-559 | 油漆用不易燃材料靜電手持噴涂設備規范 | (Specification for electrostatic hand-held spraying equipment for non-flammable material for painting and finishing.) |
| NF F19-141-2 | 鐵路車輛.通過在車體和元件部分噴漆進行防護和裝飾.第2部分:噴涂系統的裝飾性和實用性 | (RAILWAY ROLLING STOCK. PROTECTION AND ORNEMENTATION BY PAINTING OF CAR BODY AND COMPONENTS PARTS. PART 2 : DESCRIPTION AND UTILIZATION OF PAINT SYSTEMS (EXCEPT WAGONS).) |
| NF P15-203-1 | DTU 27.2.建筑工程.用潮濕噴射產品噴涂的覆蓋層.第1部分:技術規范 | (DTU 27.2. BUILDING WORKS. COVERINGS FROM BLOWN-OUT BY WET-SPRAYED PRODUCTS. PART 1 : TECHNICAL SPECIFICATIONS.) |
| NF T30-500 | 熱固性粉狀涂料.噴涂性能的測定 | (THERMO SETTING POWDER PAINTS. DETERMINATION OF EASE OF SPRAYING.) |
| NF T34-600 | 涂料和清漆.防護噴涂系統的鋼結構的腐蝕防護.C 5M級規范 | (PAINTS AND VARNISHES. CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS. SPECIFICATIONS OF C 5M CLASS.) |
| NF T35-014 | 色漆和清漆噴涂和干燥用器具.色漆調制箱.設計、工作特性 | (INSTALLATIONS FOR APPLICATION AND DRYING OF PAINTS AND VARNISHES. BOX FOR PREPARATION OF PAINTS. DESIGN,WORKING CHARACTERISTICS.) |
| NF T35-508-5 | 涂料和相關產品使用前鋼襯底的制備.非金屬噴涂清砂磨料的規范.第5部分:煉鎳礦渣(EN ISO 11126-5) | (Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Part 5 : nickel refinery slag.) |
| NF T35-508-6 | 涂料和相關產品使用前鋼襯底的制備.非金屬噴涂清砂磨料的規范.第5部分:煉鎳礦渣(EN ISO 11126-6) | (PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS. SPECIFICATIONS FOR NON-METALLIC BLAST-CLEANING ABRASIVES. PART 6 : IRON FURNACE SLAG. (EUROPEAN STANDARD EN ISO 11126-6).) |
| 編號 | 中文名稱 | 英文名稱 |